Diese Website verwendet Cookies. Durch die Nutzung der Website stimmen Sie der Verwendung von Cookies zu.
OK
Tamiya CarsonMajoretteDickie ToysSchuco 

1:10 RC Dark Impact 4WD Buggy DF-03

Art.Nr.: 300158370 Art.bezeichnung: 1:10 RC Dark Impact 4WD Buggy DF-03 Kugelgelagerter Hochleistungs-4WD-Buggy der Extraklasse. Konstruiert und gebaut für den harten Wettbewerbseinsatz. Lange Schwingen sorgen für ein stabiles Fahrverhalten, eine einfache Handhabung und werden von 4 Öldruckstoßdämpfern unterstützt. Der mittig angeordnete Motor und die Lage des Akkus geben dem Fahrzeug eine excellente Balance bei Sprüngen im Gelände. Die neuen Reifen mit dem "Tread Pattern" Profil eignen sich besonders auf harten, staubigen Strecken und sind immer den "EINEN METER" schneller. On- und Off-Road-Action - im Sand, Matsch oder auch bei Schnee und Eis... Warnhinweise: Bevor Sie mit dem Zusammenbau beginnen, sollten Sie alle Anweisungen gelesen und verstanden haben. Falls ein Kind das Modell zusammenbaut, sollte ein beaufsichtigender Erwachsener die Bauanleitung ebenfalls gelesen haben. Beim Zusammenbau des Bausatzes werden Werkzeuge einschließlich Messer verwendet. Zur Vermeidung von Verletzungen ist gesonderte Vorsicht angebracht. Falls beim Zusammenbau Schwierigkeiten auftreten, fragen Sie einen Erwachsenen, der die Arbeiten überwacht oder einen Modellbauer mit RC Erfahrungen bzw. Fachhändler. Werkzeuge jeweils nur zweckbestimmt einsetzen. Bei fehlerhafter Anwendung besteht Verletzungsgefahr. Wenn Sie Farben und/oder Kleber verwenden (nicht im Bausatz enthalten), beachten und befolgen Sie die dort beiliegenden Anweisungen. Bausatz von kleinen Kindern fernhalten. Verhüten Sie, dass Kinder irgendwelche Bauteile in den Mund nehmen oder Plastiktüten über den Kopf ziehen.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
249,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 TOYOTA GR Supra

Art.Nr.: 300024351 Art.bezeichnung: 1:24 TOYOTA GR Supra The latest addition to the long-running 1/24 Sports Car Series is a stunner – Toyota’s brand new GR Supra, which joins its R/C cousin (Item 58674) in the Tamiya catalog. Upon its global announcement in January 2019, the TOYOTA GR Supra created a worldwide buzz. Designed with beautiful balance, it provides superlative handling and stable corners, while the sensuous long nose, short deck form has a striking double-bubble roof. Combined with impeccable power from a turbocharged inline-six or inline-four engine, the GR Supra is set to define the next generation of performance. • This is a 1/24 scale plastic model assembly kit. Length: 183mm, width: 85mm, height: 54mm. • The dynamic lines of the body are rendered with stunning accuracy. Bumper, A pillar, front grille and other parts are molded separately for a sharp finish. • Features console and dashboard, and seats with separate headrest components. • Can be assembled as Japan, U.S. or Europe spec, with dedicated left- and right-hand drive part positions. • A detailed underside shows off the exhaust system, plus multi-part front and rear suspension. • Features the 19-inch wheels exclusive to the top grade RZ car in Japan. They are two-part designs with separate metal-plated and black components. Tires have realistic tread. • Includes metal transfers, plus masking stickers for window areas.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
39,99 €
inkl. Mwst. zuzüglich Versandkosten

1:100 Space Shuttle Atlantis

Art.Nr.: 300060402 Artikelbezeichnung: 1:100 Space Shuttle Atlantis NASA's space shuttle was first launched on April 12, 1981 and the fleet has accomplished numerous historic missions throughout their 30 years of service. The spacecraft conducted the latest research and played an important role in building the largest structure in space thus far, the International Space Station. The final space shuttle mission ended on July 21, 2011 with the flight of the Atlantis and the shuttle fleet is now destined for public display in museums across the United States.     Achtung! Nicht für Kinder unter 14 Jahren geeignet.
62,99 €
inkl. Mwst. zuzüglich Versandkosten

1:12 Ducati 1199 Panigale S

Art.Nr.: 300014129 Art.bezeichnung: 1:12 Ducati 1199 Panigale S Tamiya has expanded its 1/12 scale motorcycle model series with this all new model of the Ducati 1199 Panigale S. The Ducati 1199 Panigale, which was the base for the bike depicted by this model, was announced at the 2011 Milan Motor Show. It is a breathtaking fusion of beautiful looks and cutting-edge technology, featuring a newly-designed engine, monocoque frame with air box and much more. The 1199 Panigale S features upgrades to its suspension, wheels, lights and other parts for an enhanced riding experience. Features: The model depicts the bike with 2014 specifications. The engine cowling is attached using small screws and can be removed after completion of the model to allow appreciation of the engine inside. Includes single sided stand and rear wheel box stand   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
50,99 €
inkl. Mwst. zuzüglich Versandkosten

1:12 Ducati 1199 Panigale S Tricolore

Art.Nr.: 300014132 Artikelbezeichnung: 1:12 Ducati 1199 Panigale S Tricolore This scale model assembly kit depicts the Tricolore version of the thoroughbred Ducati 1199 Panigale S. As its name suggests, the Tricolore came in a 3-color scheme: red, white, and green to match the colors of the famous tricolore italiano national flag, in commemoration of the 150th anniversary of Italian reunification. It shared most of the base bike’s revolutionary design, including the 1,198cc L-Twin engine integrated into the monocoque frame and directly connected to the swing arm, damper unit, and so on.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
49,99 €
inkl. Mwst. zuzüglich Versandkosten

1:12 Ducati 888 Superbike ´93

Art.Nr.: 300014063 Artikelbezeichnung: 1:12 Ducati 888 Superbike ´93 About the Ducati 888 Superbike Racer On the 26th of September 1993, a young and inspiring motorcycle racer named Tetsuya Harada was adding the final touches to his machine at the Jarama racing circuit, just prior tot he last round of the season. This would make him the first Japanese World Champion since 1977. His closest rival, Loris Capirossi, was ahead in point standings going into this last race, but bad luck plagued him during the dynamic battle for the 250cc GP2 title. Although this was Harada's debut season for the World Grand Prix, he had been working closely with Yamaha for the last couple of seasons, perfecting the works TZM bike, which allowed him to win the 1992 All Japan Championship title. The 1993 Yamaha TZ250M used a 249cc liquid cooled V-twin cylinder engine capable of 94 horsepower. Its crankcase reed valve induction system was combined with an electronically controlled exhaust valve system. The highly sophisticated six-speed gear box used an electronic cut-out gear changing system that eliminated clutch operation and minimized racing stresses. This awesome powerplant was mounted on Yamaha's exceptionally rigid twin-spar box-section aluminum frame that was capable of head angle adjustments. The rear suspension was also of box-sectioned aluminum to withstand the enormous power and traction. The bike rides on Marchesini cast magnesium wheels matched to Dunlop radial tires. The superb stopping power was achieved by front Brembo and rear Nissin Brake systems.
29,99 €
inkl. Mwst. zuzüglich Versandkosten

1:12 Ducati 916 Desmo. 1993

Art.Nr.: 300014068 Artikelbezeichnung: 1:12 Ducati 916 Desmo. 1993 1993 wurde auf der Mailänder Motorsport Schau die Ducati 916 vorgestellt. Ihr wassergekühlter L-Twin-Zylinder Motor mit 114 PS bei 916 cm³ besitzt ein computergesteuertes Einspritzsystem und das traditionelle Desmodromic-Ventilsteuerungssystem von Ducati.
33,99 €
inkl. Mwst. zuzüglich Versandkosten

1:12 Ducati Desmosedici #65 MotoGP´03

Art.Nr.: 300014101 Artikelbezeichnung: 1:12 Ducati Desmosedici #65 MotoGP´03 Der DOHC 16 L Zwillings-V4 Motor ist aus zwei 90° V2 Bauelementen zusammengesetzt, und wird von einem rohrförmigen Stahl-Glitterrahmen zusammengehalten. Ducati setzte in sienen ersten zwei Jahren in der MotoGP, 2003 und 2004 auf L.Capirossi und T.Bayliss.
48,99 €
inkl. Mwst. zuzüglich Versandkosten

1:12 Figur Street Rider

Art.Nr.: 300014137 Art.bezeichnung: 1:12 Figur Street Rider The 1/12 Motorcycle Series welcomes a brand new, original figure in the form of the Street Rider, a male figure in casual bike gear which is perfectly suited to display with our models in the series, particularly street bikes. It features a number of options with regard to helmet, pose and eyewear. Take this chance to make a little diorama from your latest motorcycle masterpiece! About the Model • This is a 1/12 scale plastic model assembly kit. • The latest 3D scanning techniques ensure that this is a    finely molded figure with excellent detail including natural    rendering of folds and creases on the clothing. • Included are parts to make either of two different options:    i) the rider helmeted and pulling on his gloves, ready to mount    the bike; or    ii) the rider having just got off the bike, helmet in hand and with a    wooly hat on his head. • Features parts to create either half or three-quarter helmet. • Optional sunglasses and helmet visor are also included. • Comes with a screw-affixed base for stable display.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
16,49 €
inkl. Mwst. zuzüglich Versandkosten
inkl. Mwst. zuzüglich Versandkosten
inkl. Mwst. zuzüglich Versandkosten

1:12 Honda CB 750F Custom Tuned

Art.Nr.: 300014066 Artikelbezeichnung: 1:12 Honda CB 750F Custom Tuned 1979 führte Honda den CB750F ein. Die Maschine stammt direkt von der Ausführung für die Straßen-Endurance-Weltmeisterschaft ab, welche das Rennen gewann. Der perfektionierte DOHC-4-Takt 4-Zylinder Motor mit 16 Ventilen erzielt mit einem Dachkammer-Verbrennungsraum optimalen Wirkungsgrad.
24,49 €
inkl. Mwst. zuzüglich Versandkosten

1:12 Honda Monkey 125

Art.Nr.: 300014134 Art.bezeichnung: 1:12 Honda Monkey 125 This is a new entry into the famed 1/12 Motorcycle Series, as the all-new Honda Monkey 125 – which went on sale in mid-2018 – quickly joins the Tamiya line-up, too! The Monkey line was first sold in Japan in 1967, and soon gained long-lasting worldwide acclaim with its rather diminutive yet cheerful design. The Monkey 125 features a bigger 124cc engine, yet is packed with the Monkey’s trademark cheeky charm – chunky tires, rounded design motifs for headlight, speedo and more, plus gleaming chromed fenders and muffler cover. This playful little monkey looks set to be another worldwide hit, and now you can get your hands on it, in detailedTamiya 1/12! About the Model - This is a 1/12 scale plastic model assembly kit.   Length: 142mm, width: 63mm, height: 86mm. - The compact, quirky form of the Monkey 125 is captured with   superb accuracy. - Engine, swing arm, front fork and rear fender parts are secured   to the frame using screws for a durable finish. - Metal-plated parts are used to depict fenders and light cases. - Depictions of the chunky tires are dedicated parts for this model. - Comes with clear parts, damper springs, vinyl tubing to recreate   various lines, and of course decals to recreate markings.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
32,49 €
inkl. Mwst. zuzüglich Versandkosten

1:12 Kawasaki NINJA H2R

Art.Nr.: 300014131 Artikelbezeichnung: 1:12 Kawasaki NINJA H2R This 1/12 scale assembly model kit recreates Kawasaki's hyper-powerful Ninja H2R bike, a track-only monster that the famed Japanese manufacturer announced in 2015. The Ninja H2R was developed with input from many of the companies in the larger Kawasaki Heavy Industry group, and its name is a composite of two legendary Kawasaki bikes: the famed Ninja and the H2R. The Ninja H2R not only looks the part with a combination of bare carbon fiber and exquisite mirrored finish black chrome parts, it also has mind-blowing specs. It generates a hair-raising 300hp-plus from its supercharged 998cc inline-4, which it translates into other-worldly acceleration. It is also chock-full of up-to-date electronics for the track: traction control, engine brake control and more.
54,99 €
inkl. Mwst. zuzüglich Versandkosten

1:12 Kawasaki Ninja ZX-RR #55 2006

Art.Nr.: 300014109 Artikelbezeichnung: 1:12 Kawasaki Ninja ZX-RR #55 2006 The Ninja ZX-RR was Kawasaki's first MotoGP machine equipped with a 4-stroke engine, and after overcoming initial teething problems, began to show its potential. With the addition of rider Shinya Nakano in 2004, the team kept improving and became capable of challenging the top teams for race honors. Nakano rode the lime-green, 990cc-engined machine to a second place podium finish at Round 8 in the Netherlands for his best finish of the 2006 MotoGP season. Features: Cowlings can be attached/detached using precison-made screws to showcase accurately reproduced internal details. Rear suspension feature realistic nut fastener. Wrench tool is conveniently included to aid assembly. Brilliant livery can be recreated using Tamiya paints (Light Green & Semi Gloss Black), with sponsor logos provided by beautiful Cartograf decals. Synthetic rubber racing slick tires with Bridgestone markings provide an authentic race feel. Markings for both Shinya Nakano's No.56 and Randy de Puniet's No.17 included   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
53,99 €
inkl. Mwst. zuzüglich Versandkosten

1:12 Kawasaki ZZR 1400 Ninja/ZX-14 Stre.

Art.Nr.: 300014111 Artikelbezeichnung: 1:12 Kawasaki ZZR 1400 Ninja/ZX-14 Street When Kawasaki announced the ZZR1400 it continued their tradition of producing the strongest bike in the hyper sport category. It attracted much attention due to its impressive design and specifications. The ZZR1400 had such a great road presence and strong character, that it exceeded expected sales forecasts. In America it was given the official name "ZX-14" but is more widely recognized by its nickname "Ninja". The ZX-14 is currently known as the world's most powerful sports motorcycle. The motorcycle also featured a tandem seat fairing and an under diffuser. In addition to the standard coloring, a fire pattern livery was given to the American market for special use.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
53,99 €
inkl. Mwst. zuzüglich Versandkosten

1:12 Porsche Carrera GT

Art.Nr.: 300012050 Artikelbezeichnung: 1:12 Porsche Carrera GT Der TAMIYA Porsche Carrera GT ist ein absolut hochwertiger Premiumbausatz im Maßstab 1:12. Er basiert auf dem vorgefertigten Sammlermodell und verfügt über die gleichen technischen Details. So verfügt TAMIYAs Topmodell über zahlreiche funktionelle und bewegliche Bauteile wie z. B. die Lenkung. Robuste Die-Cast Querlenker mit funktionierenden Dämpfern und Stabilisatoren simulieren die Dämpfung. Türen, Motor- und Fronthaube sind an Metallscharnieren beweglich angebracht. So gewährt man Betrachtern einen Einblick auf das fein detaillierte Cockpit sowie den V10-Motor. Der Heckspoiler lässt sich wie beim Vorbild per Druck auf das Nummernschild ausfahren. Das Hard-Top kann ebenfalls vorbildgetreu unter der Fronthaube verstaut werden.
439,99 €
inkl. Mwst. zuzüglich Versandkosten

1:12 Repsol Honda RC213V '14

Art.Nr.: 300014130 Art.bezeichnung: 1:12 Repsol Honda RC213V '14 This model depicts the RC213V run by the factory-works Repsol Honda team in 2014 MotoGP. It was a momentous season for the team and for young sensation Marc Marquez. Marquez's 2014 season was sublime as he absolutely dominated with 13 wins and contributed to the Riders', Constructors' and Team Championships. The RC213V debuted in 2012 with new engine size regulations stipulating a maximum of 1,000cc. It features an aluminum double-tube frame and powerful 1,000cc Honda 4-stroke V4 with pneumatic valve system. The seamless transmission saves valuable power during shifts, while other hi-tech features include traction control, an anti-wheelie system, and engine braking control.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
52,99 €
inkl. Mwst. zuzüglich Versandkosten

1:12 Suzuki GSX1100 Katana Cust.Tuned

Art.Nr.: 300014065 Artikelbezeichnung: 1:12 Suzuki GSX1100 Katana Cust.Tuned Die Katana wurde erstmals 1980 vorgestellt. Das Konzept der auffallend aggressiven aber doch sehr aerodynamischen Karosserieauslegung basierte auf dem Aussehen des Japanischen Saumrai-Schwerts "Katana". Das Antriebsaggregat besteht aus einem 4-Takt, 16-Ventil, $-Zylinder DOHC-Motor mit 1.074cm³ Hubraum und 111 PS.
24,49 €
inkl. Mwst. zuzüglich Versandkosten

1:12 Suzuki GSX1300R Hayabusa Street ´98

Art.Nr.: 300014090 Artikelbezeichnung: 1:12 Suzuki GSX1300R Hayabusa Street ´98 Im Jahre 1998 wurde der Suzuki Hayabusa 1300 vorgestellt. Ihre überwältigenden Daten: 175PS, 141 Nm Drehmoment und 215kg Bremslast überstiegen sämtliche Leistungserwartungen. Ein wassergekühlter 1299cm³ Reihenvierzylinder mit 4 DOHC Ventilen ist in einen Aluminium-Doppelrahmen eingebaut. - 142 Bauteile - Bewegliche Teile Länge des Modells: 178 mm
41,49 €
inkl. Mwst. zuzüglich Versandkosten

1:12 Yamaha XV1600 Road Star 1999

Art.Nr.: 300014080 Artikelbezeichnung: 1:12 Yamaha XV1600 Road Star 1999 Yamaha erhöhte 1999 den Standard der Kreuzerklasse nochmals, indem man der Road Star einen bärenstarken, lufgekühlten V-Twin Motor mit 98 kubikinch und zwei Nockenwellen und Stoßstangen einpflanzte. Mit einem Maximal-Drehmoment von 129Nm dei 2000 Umdrehungen. Länge des Modells: 208 mm
41,49 €
inkl. Mwst. zuzüglich Versandkosten

1:12 Yamaha XV1600 Roadstar Custom

Art.Nr.: 300014135 Art.bezeichnung: 1:12 Yamaha XV1600 Roadstar Custom Big cruiser bikes are popular across the world, and a lot of owners like nothing more than to customize them to their own unique tastes. This updated assembly kit recreates just such a bike, a customized version of the mighty Yamaha XV1600 Road Star, the standard version of which was released as Item 14080. The XV1600 Road Star featured a 1,600cc V-twin that made it one of the most powerful motorcycles of its day, with telescopic front suspension and a rear shock tucked out of sight for a classic hardtail look to accentuate the low-slung lines, and liberal use of chrome. Customized bikes had side bags, a larger windshield, and many more variations. Item Contents/Information • This is a 1/12 scale plastic model assembly kit.    Length: 208mm, width; 89mm, height: 120mm. • A customized version of the low-slung XV1600 Road Star    is recreated in style, with metal-plated and clear parts,    plus those recreating customized parts. • Comes with decals to recreate two marking options    (green & black, or purple) which were available on bikes    sold in Japan in 2000, plus masking stickers to help with    the paint job. • The delicate fins of the air-cooled engine, spoke wheels and    the slender brake and clutch lines all add to the realism of this    motorcycle masterpiece.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
43,99 €
inkl. Mwst. zuzüglich Versandkosten

1:12 Yamaha YZF-R1 1000ccm 1997 Street

Art.Nr.: 300014073 Artikelbezeichnung: 1:12 Yamaha YZF-R1 1000ccm 1997 Street At the Motorcycle Show held in Milan, Italy, in September of 1997, the Yamaha YZF-R1 supersport motorcycle made its debut. Sporting a powerful 1000cc engine, it has the compact construction of a 400cc bike. The YZF-R1 was developed for maximum possible cornering ability in a production motorcycle. With a 1000cc water-cooled, four stroke, 4-cylinder, 5-valve engine and adopting a redesigned EXUP exhaust system, it pumps out 150hp of high-intensity power. Subtle throttle control makes both superb acceleration response and rhythmic cornering a reality. The Deltabox II aluminum frame was sought after not only for its rigidity, but more so for its moderate flexibility during tight cornering. With the addition of a long span aluminum swing arm, high control ability has been achieved. By adopting an upside-down front fork, stroke distance has been increased and traction heightened. Boasting a sharp form with multi-reflector lights, the YZF-R1 has been given an unprecedented style. From the contact points between the rider and motorcycle, right down to the material used in the seat and tank, the YZF-R1 has been thoroughly studied. Of course, the abundance of high precision and high quality parts goes without saying. Designed to cruise at high speeds on winding roads, the YZF-R1 shatters expectations about large exhaust engine motorcycles. Yamaha has expanded the possibilities of a 1000cc bike.
31,49 €
inkl. Mwst. zuzüglich Versandkosten

1:12 Yamaha YZF-R1M

Art.Nr.: 300014133 Artikelbezeichnung: 1:12 Yamaha YZF-R1M This is the latest release in the storied Tamiya 1/12 Motorcycle Series, and it recreates the 2018 spec of the highly successful YZF-R1M. 2018 is a landmark year for the long-running YZF-R1, as it celebrates its 20th anniversary; the YZF-R1M is the eighth generation of the bike, released in 2015. It was designed as a circuit motorcycle, and its design and technology were heavily influenced by data harvested from the YZR-M1 MotoGP bike. • This is a 1/12 scale plastic model assembly kit. • Multi-piece recreation of the 4-cylinder engine has superlative detail, from the fine depictions of the radiator, oil cooler and complex cover, to the tubing included to recreate various lines. • Depictions of engine, swing arm, front fork, upper cowl and more are screw-fixed to the frame for maximum precision and durability. • New synthetic rubber tires depict Bridgestone Battlax RS10s with realistically-recreated tread pattern. • Metal transfer to depict Yamaha emblem tentatively planned for inclusion.     Achtung! Nicht für Kinder unter 14 Jahren geeignet.
44,99 €
inkl. Mwst. zuzüglich Versandkosten

1:16 Fig. Bundeswehr Besatz Leopard (2)

Art.Nr.: 300036309 Artikelbezeichnung: 1:16 Fig. Bundeswehr Besatz Leopard (2) Panzer Besatzungsmann der Deutschen Bundeswehr.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
21,99 €
inkl. Mwst. zuzüglich Versandkosten

1:16 Figur Deut. Infanterie Soldat

Art.Nr.: 300036303 Artikelbezeichnung: 1:16 Figur Deut. Infanterie Soldat Soldat der Deutschen Elite-Infanterie.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
17,99 €
inkl. Mwst. zuzüglich Versandkosten

1:16 Figur Deutscher Panzersoldat

Art.Nr.: 300036301 Artikelbezeichnung: 1:16 Figure Wehrmacht Tank Crewman Panzer Besatzungsmann der Deutschen Wehrmacht.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
14,69 €
inkl. Mwst. zuzüglich Versandkosten

1:16 Kübelwagen Type 82 Afrika Korps

Art.Nr.: 300036202 Artikelbezeichnung: 1:16 Kübelwagen Type 82 Afrika Korps Kubelwagen-Africa Version Because of its reliability and ease of repair, and since its engine did not require a coolant, the Kubelwagen proved particularly effective in North Africa. At the request of various divisions in North Africa for a vehicle suitable for the desert, a Continental balloon tire equipped version went into production from 1942. Two types of balloon tires, a grooved and an ungrooved version were used. Because the tires were wider than normal tires, a spacer to raise the height of a spare tire attachment was added to the hood of the car. Some of the balloon tire equipped Type 82 were even used in Italy after the fighting in North Africa stopped in May of 1943. About the model •1/16 scale plastic model construction kit •Overall length: 238mm, overall width: 103mm, overall height: 93mm •Precisely replicated balloon tire equipped Kubelwagen Type 82 - Africa version Instrument panel, seats and 4-wheel independent suspension system are also reproduced realistically. •All the doors and engine room cover can be modeled in either open or closed position. •The engine room shows mechanical equipment including air cleaner, 4 cylinder horizontally opposed air cooled engine and repair tools •Balloon tires are of semi-pneumatic rubber and front wheels are steerable. •Includes accessories such as jerry cans and canteen for drinking water, Rommel figure and a driver figure.
99,99 €
inkl. Mwst. zuzüglich Versandkosten

1:16 Kübelwagen Type 82 Europa Feldzug

Art.Nr.: 300036205 Artikelbezeichnung: 1:16 Kübelwagen Type 82 Europa Feldzug About the Kubelwagen Type 82 The Kubelwagen was originally designed as a civilian vehicle, but after German militaristic expansion and mobilization in the late 1930's plans were soon made for a military version. After the poor performance of the Kubelwagen Type 62, an improved model designated Type 82 went into mass production in 1940. The Kubelwagen Type 82 featured a trustworthy 4-cylinder, horizontally opposed, air-cooled engine, capable of 23.5hp at 3000rpm and provided a top speed of 80km/h. Over 50,000 Kubelwagens were produced by the war's end. From the searing heat of the North African Front to the blistering cold of the Russian Front, the Kubelwagen Type 82 was used for reconnaissance and communications purposes. Kubelwagen Type 82 (European Campaign) Features •Kubelwagen Type 82 plastic assembly kit. •1/16 scale, Overall length: 242mm, Overall width: 100mm. •Equipped with standard tires. Strengthening pressed lines have been accurately reproduced. •All doors and engine access door can be assembled in opened or closed position. •Hood can be assembled in the up or down position. •Tires are made of real rubber and front wheels can be steered by moving steering wheel. •Kit replicates full set of accessories including fuel jerry cans and driver figure.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
99,99 €
inkl. Mwst. zuzüglich Versandkosten

1:16 Panzer-Kampfwagen IV Ausf.J (S.Mot)

Art.Nr.: 300036211 Artikelbezeichnung: 1:16 Panzer-Kampfwagen IV Ausf.J (S.Mot) This 1/16 scale Big Tanks series motorized model kit recreates the J variant of the Pz.Kpfw. IV. It was the true workhorse of the German military in WWII, which proved to be a formidable foe to Allied troops. The simplified, defensively improved Ausf.J was one of the final Pz.Kpfw. IV variants, fighting through to the end of the war as the core of German tank units, along with the Panther and King Tiger.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
499,99 €
inkl. Mwst. zuzüglich Versandkosten

1:16 US KPz M1A2 Abrams Standmodell

Art.Nr.: 300036212 Artikelbezeichnung: 1:16 US KPz M1A2 Abrams Standmodell This Large-Scale 1/16 model recreates the current stalwart of U.S. forces, the M1A2 Abrams. The M1 Abrams has been around since the early 1980s, receiving constant upgrades to ensure that it stays at the cutting edge of military technology. M1A2s were introduced from 1992 and developed as next generations of the tank, chock full of the front-line technology and bringing the M1 into the digital age. They featured depleted uranium armor, a modified commander’s cupola and more, and saw action in the conflict in Iraq in 2003. Specifications •1/16 scale plastic model assembly kit of the M1A2 Abrams. •The form of the M1A2 with its flat turret and hull armor is expertly recreated, complete with depictions of anti-slip surfaces. •Features a tough duralumin chassis. Metal parts recreate drive sprockets, idler wheels, suspension parts and more. •Includes durable pre-assembled resin double-pin tracks secured with metal pins and utilizing rubber pads. •The gun features an aluminum barrel for superb realism. •Photo-etched parts are used to recreate engine deck and turret rear basket.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
479,99 €
inkl. Mwst. zuzüglich Versandkosten
inkl. Mwst. zuzüglich Versandkosten

1:16 WWII Figur Dt. Panzersoldat Afrika

Art.Nr.: 300036310 Artikelbezeichnung: 1:16 WWII Figur Dt. Panzersoldat Afrika Panzer Besatzungsmann der Deutschen Wehrmacht.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
22,99 €
inkl. Mwst. zuzüglich Versandkosten

1:16 WWII Figur Dt.Luftwaffe Flieger-Ass

Art.Nr.: 300036302 Artikelbezeichnung: 1:16 WWII Figur Dt.Luftwaffe Flieger-Ass Pilot der Deutschen Luftwaffe.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
14,69 €
inkl. Mwst. zuzüglich Versandkosten

1:16 WWII Figur Dt.Soldat m.Mantel u.MG

Art.Nr.: 300036306 Artikelbezeichnung: 1:16 WWII Figur Dt.Soldat m.Mantel u.MG TAMIYA hat mit der „Welt-Figuren-Serie" im Maßstab 1:16 eine neue Dimension im Figuren-Modellbau eröffnet.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
17,99 €
inkl. Mwst. zuzüglich Versandkosten
inkl. Mwst. zuzüglich Versandkosten

1:20 F1-2000 #4 Fin. Model MW

  Achtung! Nicht für Kinder unter 14 Jahren geeignet.
174,99 €
inkl. Mwst. zuzüglich Versandkosten

1:20 F2001 #1 Fin. Model MW

  Achtung! Nicht für Kinder unter 14 Jahren geeignet.
174,99 €
inkl. Mwst. zuzüglich Versandkosten

1:20 F2001 #2 Fin. Model MW

  Achtung! Nicht für Kinder unter 14 Jahren geeignet.
174,99 €
inkl. Mwst. zuzüglich Versandkosten

1:20 F310B #5 Fin. Model MW

  Achtung! Nicht für Kinder unter 14 Jahren geeignet.
174,99 €
inkl. Mwst. zuzüglich Versandkosten

1:20 F310B #6 Fin. Model MW

  Achtung! Nicht für Kinder unter 14 Jahren geeignet.
174,99 €
inkl. Mwst. zuzüglich Versandkosten

1:20 Ferrari F1 2001 V10 #1/#2

  Achtung! Nicht für Kinder unter 14 Jahren geeignet.
29,99 €
inkl. Mwst. zuzüglich Versandkosten

1:20 Ferrari F310B 1996

  Achtung! Nicht für Kinder unter 14 Jahren geeignet.
28,99 €
inkl. Mwst. zuzüglich Versandkosten

1:20 Ferrari SF70H

Art.Nr.: 300020068 Artikelbezeichnung: 1:20 Ferrari SF70H This model recreates the Ferrari SF70H F-1 of the 2017 F1 season. Specifically, this replica kit recreates the car that won the opening round of the Australian G.P. With regulations promoting greater aerodynamic downforce and mechanical grip, Scuderia Ferrari came up with the sleek SF70H body featuring a lengthened nose, arrow-shaped front wing, engine cover fin and revamped side pods. Powered by the 1.6-liter V6 062 engine in harmony with an electric motor, ace driver Sebastian Vettel was in the thick of an enthralling Drivers’ Championship race all season long with Mercedes driver and eventual world champion Lewis Hamilton.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
65,99 €
inkl. Mwst. zuzüglich Versandkosten

1:20 Lotus Typ 79 1978

Art.Nr.: 300020060 Artikelbezeichnung: 1:20 Lotus Typ 79 1978 • 1/20 scale plastic assembly model kit of the Lotus type 79. • The front and rear upper cowls can be removed after assembly to view the engine and cockpit area. • The monocoque chassis, suspension, and engine have been precisely reproduced. • Synthetic rubber tires included. • Top quality decals to depict the Lotus seen at both British and German GP's, which did not feature JPS markings, are included. • Newly designed tires and metal funnel covers included. • Add further detail to your model with Item 12635 1/20 Lotus Type 79 1978 Photo-Etched Parts Set.  
62,99 €
inkl. Mwst. zuzüglich Versandkosten

1:20 Lotus Typ 79 Martini 1979

Art.Nr.: 300020061 Art.bezeichnung: 1:20 Lotus Typ 79 Martini 1979 - The front and rear upper cowls can be removed after assembly to view the engine and cockpit area. -Additional H and J Parts have been included (see image below) to accurately depict the differences from the Lotus Type 79 1978 (Item 20060). - Decals included.
75,99 €
inkl. Mwst. zuzüglich Versandkosten

1:20 Renngurte-Set A

Art.Nr.: 300012637 Artikelbezeichnung: 1:20 Renngurte-Set A Add greater realism to your 1/20 scale Grand Prix model with this Detail-Up parts set. This set is perfect for models depicted from the early 1970's to the early 1980's. 1:20
6,79 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Calsonic Skyline GT-R (R34)

Art.Nr.: 300024219 Art.bezeichnung: 1:24 Calsonic Skyline GT-R (R34) The unrivaled Nissan Skyline GT-R of the 1970's Japanese touring car races valiantly returned to the race circuit in 1990. Equipped with 2.6l, inline 6-cylinder twin turbo engines, two R32 Skyline GT-R's brilliantly triumphed in all six races. Particularly impressive was the bright blue Calsonic Skyline, which achieved five of the six victories to take the series championship. In 1993, the Calsonic Skyline was converted into a GT machine and brought out for the All Japan GT Championships, where it took top honors for three years running. From the middle of the 1995 season, the R33 version of the Skyline GT-R was brought out. The R33 was based on the 4WD production car, but was instead equipped with rear wheel drive. For the 1999 All Japan GT Championships, Nissan brought out a new machine, the R34. Compared to its predecessor, the R33, the R34 was constructed more compactly, with a narrow wheelbase. It was developed to take advantage of the reinforced chassis used on the production model brought out in January of that year. Except for the roof, the body was completely remade in carbon fiber and equipped with a large, curved wing on the rear- just one example of its aerodynamic and stylish form. Undergoing constant improvements since 1990, the inline, 6-cylinder DOHC twin turbo engine of the R34 is maximized with a 6-speed sequential transmission and rear wheel drive. The latest incarnation of the Skyline GT-R, the R34, promises to add more GT Championship Titles to Nissan's illustrious racing history.
23,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Castrol Celica

Art.Nr.: 300024125 Art.bezeichnung: 1:24 Castrol Celica When the curtain went up on the 1993 World Rally Championships, the "92 title winning Toyota Team of Europe were ready to take on their capable rivals Lancia, Ford, Subaru, Mitsubishi, and the others, making this Monte Carlo Rally a very exciting event for motorsports fans. Toyota"s highly sophisticated Celica GT-Four RC, with driver Didier Auriol at the wheel, showed impressive performance by out-running all competition to dominate this first round of the season. Regarded as one of the most technologically advanced and potent rally racing machines available today, the Celica GT-Four RC is powered by a 2 liter, liquid cooled in-line four cylinder DOHC, turbocharged engine, capable of yielding 299 HP and 45.9kg/m of torque. This tremendous power is channeled via 6-speed gearbox to all four wheels. The electronically controlled torque-splitter distributes 50:50 front/rear power under normal operations, but is capable of automatically shifting to other ratios when the power distribution sensor detects a change in road surface conditions or even driving style. Night running equipment used during Monte Carlo Rally included quadruple spot-lamps plus cornering lamps that made the racer look even more massive.
18,79 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Enzo Ferrari Giallo Modena

  Achtung! Nicht für Kinder unter 14 Jahren geeignet.
54,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Ferrari 360 Modena

  Achtung! Nicht für Kinder unter 14 Jahren geeignet.
41,49 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Ferrari 360 Spider Strassenversion

  Achtung! Nicht für Kinder unter 14 Jahren geeignet.
41,49 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Ferrari F50

Art.Nr.: 300024296 Art.bezeichnung: 1:24 Ferrari F50 During the Geneva, Switzerland Motor Show in March 1995, Ferrari showed their new F50. Packed with Ferrari's latest automotive technology, gleaned from their recent Formula-One racing expertises, the F50 was designed to be a "street-legal racing maching" in the truest sense of the word. This Ferrari's highly rigid center monocoque section was fabricated from hi-tech carbon fiber composites. The engine/gearbox unit is firmly bolted to this monocoque and works as a load-carrying element, just as on their F-1 racing machines. The normally aspirated 4.7 liter V-12 cylinder engine uses five valves per cylinder and yields an amazing 520 horsepower at 8,500rpm. The 6-speed synchromesh gearbox transmits this tremendous power smoothly and efficiently to the rear wheels. The F50's double wishbone suspension system is connected to the electronically controlled shock absorbers via pushrods, to provide optimum road holding performance. The Pininfarina designed body shell was purposely sculptured for excellent aerodynamics, yet retains Ferrari's traditional automotive grace. The chassis underside is completely flat, with upsweep at the rear end that acts as a diffuser. By using a removable roof, made from composite material, the car can be converted into a "Barchetta" (open-top) or "Berlinetta" (coupe). Ferrari's top models have all been destined to become true automotive legends and the F50 will be no exception.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
38,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Ferrari F50 Gelb Strassenversion

  Achtung! Nicht für Kinder unter 14 Jahren geeignet.
38,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Ferrari FXX 2005 Race

Art.Nr.: 300024292 Art.bezeichnung: 1:24 Ferrari FXX 2005 Race The Ferrari FXX is a special limited edition thoroughbred that was unveiled in 2005. Based on the Enzo Ferrari, the FXX features drastically improved aerodynamics. Its formidable 6262cc V12 engine pumps out over 800 horsepower and is matched with a sequential transmission that allows blindingly fast gear changes of less than 1/100 of a second. The 29 lucky owners of this car have been joined by now retired F1 champion Michael Schumacher, who was presented with one of these super cars by Ferrari. ★1/24 Scale、Length: 202mm、Width: 86mm ★Accurately reproduced form of the FXX body. ★Unique features of the FXX, including 800 horsepower V12 engine and suspension system, are all faithfully replicated. ★Realistic race cockpit with roll cage, bucket seats, fire extinguisher, air jack, and instrument panel. ★Gull wing type doors can be opened and closed even after assembly. ★Central section of the rear wing can be assembled in both the up and down positions. ★Air intake mesh and metal transfer logos included for extra detail. ★Stylish black wheels with red trim mounted with realistic racing slick tires. ★Metal-plated exhaust tips for additional body highlight. For the Ultimate Level of Realism: 1/24 Ferrari FXX Photo-Etched Parts Set For those who want to kick up the realism another notch, Tamiya provides this set of precision-made photo-etched parts. Contains parts of front air intake mesh, side air intake mesh, rear air outlet mesh, tow hook, and catch pins. Also includes photo-etched brake discs, seat belts, and nameplate for an ultra-realistic display.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
57,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Ferrari LaFerrari Yellow Version

Art.Nr.: 300024347 Artikelbezeichnung: 1:24 Ferrari LaFerrari Yellow Version This is a special version of the stunning 1/24 LaFerrari kit, with body parts molded in yellow to allow for easy creation of a car with the iconic Giallo Modena color from the Ferrari catalog. Only 499 of the actual hybridsupercar were made, so if you weren’t lucky enough to get your hands on a 1/1 scale LaFerrari, this kit represents a great opportunity to recreate it in detailed Tamiya 1/24! About the Model • This is a 1/24 scale plastic model assembly kit. Length: 196mm, width: 88mm. • The luxurious body is accurately recreated using yellow molded A and A24 parts. • It comes in a dedicated package with the LaFerrari depicted in yellow, plus an updated instruction manual. • V12 engine, transmission and HY-KERS hybrid system are depicted with great accuracy. • Monocoque frame and suspension shown incredible attention to detail. • Includes mesh for intake grilles, and clear underpanel parts, plus metal transfers for depiction of emblems. • Separately-sold photo-etched parts (Item 12654) and carbon pattern decals (Item 12656) are available tofurther crank up the detail on your masterpiece. • Please note that this is a limited production item, with only one run planned at present.  
59,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Ferrari Testarossa

  Achtung! Nicht für Kinder unter 14 Jahren geeignet.
23,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Figuren-Set Rally Mechaniker (5)

Art.Nr.: 300024266 Artikelbezeichnung: 1:24 Figuren-Set Rally Mechaniker (5) Ein Fahrer und vier Mechaniker in verschiedenen Posen mit Wagenheber, Auffahrrampe, Bremsscheiben, Stoßdämpfer, Notebook und Werkzeug.
23,49 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Ford GT

Art.Nr.: 300024346 Art.bezeichnung: 1:24 Ford GT Honed to Perfection Ford’s GT40 was a motorsports legend which dominated the prestigious 24 Hours of Le Mans race with four back-to-back victories between 1966 and 1969. Nearly 50 years on, and 2015 welcomed a newcomer with the legendary GT name, a revolutionary design upon which Ford have unleashed their passion for innovation: the Ford GT. It is based around a carbon fiber monocoque and endowed with a 647hp 3.5-liter EcoBoost V6 engine plus a 7-speed dual-clutch transmission, not to mention an aerodynamically-honed carbon fiber body: the result is a top speed of a cool 347km/h. A competition model took a magnificent class victory in the 2016 running of the 24 Hours of Le Mans. About the Model ★This is a 1/24 scale plastic model assembly kit. Length: 200mm, width; 94mm, height: 46mm. ★Refined aerodynamic form is captured with aplomb, with depictions of buttresses, door-side air tunnels and underside design. ★Body rear parts breakdown closely follows that of the actual car for super realism. ★Metal-plated wheels and oil tank depiction give an extra layer of realism. ★Shoulder sections and passenger seat dashboard are separate parts. ★Realistic soft resin tires.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
48,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 FXX K #10 Red Fin. Model MW

  Achtung! Nicht für Kinder unter 14 Jahren geeignet.
204,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 HONDA NSX / ACURA NSX

Art.Nr.: 300024344 Artikelbezeichnung: 1:24 HONDA NSX / ACURA NSX This plastic assembly kit model recreates the NEXT GENERATION NSX supercar. The full-size car is a highly technical and utterly thrilling supercar. With weight-saving construction, a hybrid powertrain that has three electric motors and a mid-mounted twin-turbo 3.5-liter V-6 making a combined output of 573 HP, the NSX offers pulse-pounding performance paired with everyday usability. The power plant is mated to a nine-speed dual-clutch automatic, which moves an all-wheel drive train. - Length: 187mm, width: 92mm, height: 51mm.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
46,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Honda S600 Cabrio/Hardtop

Art.Nr.: 300024340 Art.bezeichnung 1/24 Honda S600 Cabrio/Hardtop The Honda S600 is an automobile manufactured by Honda. It was launched in March 1964. It was available as a roadster and as a fastback coupé – introduced in March 1965. The S600 was the first Honda available in two trim levels. During its production run up to 1966, the model styling would remain pretty much the same, with the most notable changes coming to the front grille, bumper, and headlights. The S600 got 57hp out of a 606cc 4-cylinder DOHC engine that could hold its own compared with racing engines, and it featured a motorcycle style chain-driven rear wheel drive. Exports to Europe followed as the S600 quickly gained respect, gaining popularity as a highly lightweight and speedy sports car. It was also to prove a success in races both inside and outside of Japan. The Tamiya model faithfully captures the essence of the S600, thanks to new tooling and updated parts from the S800 model kit. About the model: • This is a 1/24 scale plastic model assembly kit. • The compact, lowdown form of the S600 is covered with accuracy. • This kit is based upon Tamiya’s accurate kit of the S800 (Items 24190, 89657). New parts are included to depict S600-specific features such as the front grille and bumper unit, hood, radiator-top parts, brake and reverse lights, plus wheels. • The unique rear chain-drive unit-based trailing arm suspension is concisely and realistically captured, as is the front double wishbone setup. • Parts are included to recreate the S600 as an open top with folded down roof, or as a hard top. • Decals and metal transfers have been newly designed for this model.
41,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Lancia Stratos Turbo Silver plat.

Art.Nr.: 300025418 Art.bezeichnung: 1:24 Lancia Stratos Turbo Silver plat. The original Lancia Stratos Turbo model (Item 24003) is a classic model kit that was first released back in 1977. This is a special edition re-issue model with a stylish metal-plated finish! The Stratos was developed through the early 1970s and went on to appear in WRC races, taking a magnificent hat-trick of manufacturer titles between 1974 and 1976. Lancia later developed the car further for Group 5 circuit racing, with a revamped body and turbocharged engine: it is this car that is recreated by this kit. • 1/24 scale plastic model assembly kit. • The stylish, racy form of the Stratos is recreated in style. Body, B (excluding driver) and C parts (wheels, • etc.) are given a semi-gloss metal plated finish. • Features a highly realistic full body driver figure in racing garb and helmet. • Detailed interior features authentic recreations of seats, dash, gearshift and more. • Window parts now have a scored section molded into them, allowing easy cut-out of the side window • section to fully show off the driver and interior. • Separate parts recreate side mirrors, windshield wipers and more.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
35,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 LEON CVSTOS AMG GT3

Art.Nr.: 300024350 Art.bezeichnung: 1:24 LEON CVSTOS AMG GT3   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
61,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Lexus LFA V10 SV m.Ph-Ätz-Teile

Art.Nr.: 300024319 Artikelbezeichnung: 1:24 Lexus LFA V10 SV m.Ph-Ätz-Teile Über das Modell • Bausatz im Maßstab 1:24 • Länge 188 mm, Breite 85 mm • Die elegante und aerodynamische Karosserie ist perfekt nachgebildet. • Dank der abnehmbaren Motorhaube kann der fein detaillierte Motor, auch nachdem Zusammenbau, betrachtet werden. • Fahrercockpit ist akkurat nachgebildet • Magneten erlauben den Austausch des Heckflügels, um diesen ein- und ausgefahren darzustellen • Metallaufkleber für Spiegel und Herstellerembleme • Lichtgehäuse sind metallbeschichtet • Felgen sind matt metallbeschichtet • Fotoätzteile für Kühlergrill und Gittereinsätze • synthetische Gummireifen
79,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Mercedes Benz 300SL Flügeltürer

Der Mercedes-Benz 300 SL ergänzt als klassischer Sportwagen die Tamiya Sportwagen-Serie im Maßstab 1:24. Das Originalfahrzeug wurde ursprünglich als Prototyp für das hauseigene Rennteam produziert, um damit an nationalen Rennen und Meisterschaften teilzunehmen. Im Jahre 1954 debütierte ein Serienfahrzeug auf der Internationalen Automobil-Ausstellung in New York. Trotz seines „Straßenauto-Status" war der 300 SL ein rassiges und elegantes Fahrzeug, das in den Vereinigten Staaten sehr populär war und großen Anklang fand. Er verfügt über einen 3-Liter-Reihen-6-Zylinder Motor - daher auch die „300" in seinem Namen-, eine extrem leichte Karosserie - SL steht für „Sport Leicht" bzw. „Leicht Sport"- und die markanten Flügeltüren. Bis zum Produktionsende im Mai 1957 wurden 1.400 Einheiten produziert. Der Tamiya Bausatz spiegelt alle Details wider: den komplexen Gitterrohrrahmen, die markanten Flügeltüren und noch viele weitere – somit steht das Modell dem Original in nichts nach. Produktdetails: Modell-Bausatz im Maßstab 1:24 Die zeitlos elegante Form dieses Klassikers ist atemberaubend vom Modell erfasst und umgesetzt. Die Motorhaube und Flügeltüren können geöffnet werden. Die Türen lassen sich in geöffneter Stellung mit einer kleinen Strebe verriegeln. Unter der Motorhaube verbergen sich der sehr detaillierte Motor und Motorraum. Die Motorhaube kann auch in geöffneter Stellung arretiert werden. Der Komplex Gitterrohrrahmen - einer der Signaturpunkte des Autos - ist detailgetreu reproduziert. Zur Detaillierung des vorderen Lufteinlasses befindet sich Nylon-Gitter im Lieferumfang Viele Chromteile z.B. Zierleisten, Stoßstangen und mehr sind im Bausatz enthalten. Masking Tape für die Scheiben - sind im Bausatz enthalten Metall-Transfers Dekor sind im Bausatz enthalten (Spiegelflächen, Embleme). Originalgetreue Reprodukti   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
55,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Mercedes-AMG GT3 #1

Art.Nr.: 300024345 Artikelbezeichnung: 1:24 Mercedes-AMG GT3 #1 This scale model assembly kit recreates the 2016 Mercedes-AMG GT3 race car. It is a GT3 class spec customer sports car that was converted from the AMG GT road car by the Mercedes-AMG high performance division. The full-size racer features a reliable and powerful 6.3-liter naturally aspirated V8 engine harnessing 558hp. Its carbon fiber body overhauls the road car version and has a prominent grille inspired by the classic 300 SL. The race car is also fitted with racing essentials such as a large rear wing, air intakes, splitter, canards and diffusers contributing to its aerodynamics. All of these details are expertly detailed in the model kit to give the modeler the most accurate parts to finish the model.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
59,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Mitsubishi Lancer Evolution VI

Art.Nr.: 300024213 Artikelbezeichnung: 1:24 Mitsubishi Lancer Evolution VI ★This is a plastic model assembly kit depicting the car which formed the base for Mitsubishi's 1999 rally challenge. ★From the front bumper designed to boost cooling, to the 2-step rear wing, the form of the car is captured in style. ★Features recreation of the radiator visible through the nylon mesh front grille. ★Choose whether to attach front fog lamps. ★Realistic depictions of suspension and interior.
28,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 NISMO Skyline GT-R Z-tune (R34)

Art.Nr.: 300024282 Artikelbezeichnung: 1:24 NISMO Skyline GT-R Z-tune (R34) Nismo, Nissan´s Rennteam, nahm einen angegrauten Nissan Skyline GT-R (R34) V-Spec und baute ihn in ein Superauto um. Von erfahrenen Fachleuten getunt bringt der Motor eine Maximalleistung von 500 PS ein Drehmoment von 550 Nm. Mit seinem Preis von ca. 130.000 Euro erregte er beim 2005er Tokio Autosalon Riesenaufsehen.
35,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Nissan 370Z Heritage Edition

Art.Nr.: 300024348 Art.bezeichnung: 1:24 Nissan 370Z Heritage Edition - Bausatz im Maßstab 1/24 - Spezielles Heritage Design - Kann als Rechts- und Linkslenker gebaut werden. - Detailliertes Interior - Glänzende und matte Metallteile - 2 verschiedene Designs enthalten:   schwarze Streifen/silberne Streifen) - Neues Felgendesign - Benötigte Farben: TS14, TS45, TS47, TS89.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
44,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Nissan Skyline 2000GT-R Str. Custom

Art.Nr.: 300024335 Art.bezeichnung: 1/24 Nissan Skyline 2000GT-R Str. Custom The hard-top version of the Skyline 2000GT-R was released in 1970 and packed a serious punch with a detuned version of the inline-6 engine seen on the Nissan R380 prototype racing car. The "hakosuka", as it is affectionately known in Japan, is still a Japanese racing legend today, thanks to an incredible 50 total wins achieved in partnership with the 1969 4-door sedan GT-R. Now, it makes an appearance as a production model of the car with parts depicting popular customizations from its day, as well as a realistic driver figure.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
47,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Nissan Skyline GT-R (R32) Nismo-Cu.

Art.Nr.: 300024341 Art.bezeichnung: 1/24 GT-R (R32) Nismo-Custom This is a model of the classic Skyline GT-R (R32). This particular kit varies from previous releases as it has brand new parts that depict customizing accessories that were designed and made by Nissan's tuning outfit Nismo. The R32 is the 1989 version of the legendary GT-R. It had a 4WD drivetrain; it was mated to a 280hp engine and it was loaded with cutting-edge design and technological innovations for its day.
35,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Porsche 911 GT1 LeMans `96 Werkst.

Art.Nr.: 300024186 Artikelbezeichnung: 1:24 Porsche 911 GT1 LeMans `96 Werkst. ★This is a plastic model assembly kit depicting the car which competed in the 1996 running of the 24 Hours of Le Mans. ★The low, side form of the car is recreated in style, with depictions of the midship twin turbo engine and suspension. ★Features a realistic interior with roll cage, plus a removable rear cowl component. ★Decals are included to recreate the livery.
33,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Porsche 911GT2 Club Sport/Strassenv

Art.Nr.: 300024247 Artikelbezeichnung: 1:24 Porsche 911GT2 Club Sport/Strassenversion About the Porsche 911 GT2 Road Version Club Sport Only Porsche, committed to sports car racing, could make a racing version and production version of a sports car nearly identical. The Porsche 911 GT2 was first developed in 1995 to compete in sports car races and GT2 class circuits. The guts of this racing machine consist of 6-speed, rear-wheel drive transmission, powered by a rear installed 3600cc air-cooled V6 engine with 450hp of output. The street legal version had its output reduced to 430hp, still deemed more than enough for public roads, and featured the added comfort of nice air conditioning and the luxury of great audio. Intended as a means of practical transportation on workdays and for weekend warrior circuit racing on off-days, the compact Porsche 911 GT2 Road Version brought unprecedented delight to sports car fans all over the globe.
30,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Porsche 959

Art.Nr.: 300024065 Artikelbezeichnung: 1:24 Porsche 959 The Porsche 959 was first unveiled at the 1983 Frankfurt auto show as a study for a full time 4 wheel drive Group B super sports car. Back then, the automobile was still far from being completed and its potential a mystery. The 959's awesome capabilities matured through thorough research and competition experience with the automobile. It demonstrated its outstanding abilities during the grueling Paris-Dakar Rally, and the Le Mans 24 hour endurance race. Porsche has taken their race car technology and put it into the 959, to produce a car that provides every comfort, with smooth running and the low interior noise expected of a road car, while offering high safety reserves. Thus the 959, despite its massive 450hp engine power, can be drive easily at its lower RPM ranges. The 2848cc engine is a descendent of the famous 956 and 962 Porsche Group C racer. It is an air/liquid cooled, flat 6 cylinder, DOHC equipped with two turbochargers, providing a top speed of more than 300km/h. The 959 maintains superb acceleration under all driving conditions, yet it also achieves short braking distances that prove to be a reassuring factor for all classes of drivers. The hollow wheel spokes increase air volume to the brakes and accommodate the fat, low profile Dunlop Denloc tires, and is equipped with a pressure sensor to detect punctures. The Porsche 959 is the car that raised the standard of sports car thinking to a new plateau, by exceeding every known yardstick of handling and performance.
22,49 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Renault Alpine A110 ´71 Monte Carlo

Art.Nr.: 300024278 Artikelbezeichnung: 1:24 Renault Alpine A110 ´71 Monte Carlo In 1997, Tamiya released the street version of the Alpine A110 as a 1/24 scale model, and its perfect duplication of the car's nostalgic design was a big hit. Now, Tamiya presents the rally version of the Alpine A110, representing the car that won the 1971 Monte Carlo Rally. The Alpine was developed by Jean Redele, who initially raced with the Renault 4CV. He soon noticed the limitations of its heavy body, and decided to replace it with his own design made of FRP. Redele drove a modified 4CV, dubbed the Alpine, to victory in the Mille Miglia road race in 1955, and continued to develop new versions based on Renault cars. The Alpine A110 was released in 1963, and was based on the Renault 8. It had a 956cc 4-cylinder engine at the rear and lightweight body shell made of FRP. Front suspension featured the independent double wishbone type, while the rear used swing arms. The A110 proved its ability by dominating road races held throughout the late 60's and early 70's, with its win at the 1971 Monte Carlo Rally undoubtedly crowning the pinnacle of its career. With its successful record and beautiful design, the Alpine A110 is adored by motor sports fans worldwide. Skillful reproduction of the Alpine A110's low and sleek body styling. Overall Length: 161mm. Exquisitely designed decals reproduce the A110's 1971 Monte Carlo Rally markings. Amazingly precise details of car's mechanisms, including rear-mounted inline 4-cylinder engine, front and rear suspension and special rally wheels. Includes dash-mounted odometer and other features specific to the rally version.
45,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Subaru BRZ Schw. Fin. Model

  Achtung! Nicht für Kinder unter 14 Jahren geeignet.
99,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Subaru Impreza WRC '99

Art.Nr.: 300024218 Art.bezeichnung: 1:24 Subaru Impreza WRC '99 The 1997 World Rally Championships saw a relaxing in the rules pertaining to vehicle modification. Subaru was the first team to take advantage of the leeway, bringing out the Impreza WRC. That machine featured all aluminum horizontal four cylinder turbo engine paired with a vertically mounted gearbox. The layout placed the gearbox in a balanced position behind the front axle, heightening manerverability and ultimately contributing to a Mnufactures Championship for that year. The bulk of the improvements to the 1999 model centered around the engine and gearbox. Foremost was the adoption of an electronically controlled throttle system. This system converts the position of the throttle in to electronic signals, heightening throttle response. The Impreza WRC was also equipped with a 6-speed, semi-automatic gearbox. This system enables sudden shifting, such as from 6th to 1st gear. Work is also continuing on the development of an electronically controlled damper system. The Impreza WRC is driven by J. Kankkunen, R. Burns and B. Thiry. Kankkunen and Burns finished in 1st and 2nd place respectively at both the 7th Argentina Rally and the 10th Finland Rally. The 8th Acropolis Rally was also taken by Burns, setting the scene for an intense contest in the latter half of the season.
22,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Subaru Impreza WRC 2001

Art.Nr.: 300024240 Artikelbezeichnung: 1:24 Subaru Impreza WRC 2001 Soon after the adoption of the new regulations for the World Rally Championships in 1997, Subaru boldly entered their Impreza WRC. That well-balanced machine was equipped with a powerful horizontally opposed 4 cylinder turbo engine, and secured that year's Manufacturers Title. In the following years, various improvements were made to the car in accordance with changes in the production model. The 2001 Impreza adopted a four-door sedan body and first showed itself at the season opener, the Monte Carlo Rally. The unique appearance of the car was highlighted by small compound headlights, spoiler attached to the extreme rear and blister-style fenders. The engine underwent extensive tuning in an effort to boost responsiveness, and major progress was made in regards to electronic control of the semi-automatic transmission and front, center, and rear differential gearing. Subaru's ace driver, Richard Burns, was accompanied by Markko Martin, Petter Solberg, and Toshihiro Arai.  
31,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Taisan Starcard Porsche 911GT2 `95

Art.Nr.: 300024175 Artikelbezeichnung: 1:24 Taisan Starcard Porsche 911GT2 `95 About the Taisan Starcard Porsche 911 GT Since its debut back in 1964, the Porsche 911 stable has established an unparalleled esteem, both on streets and in competitions. The "GT2" is a race ready version developed for the world's GT racing events. The traditional 911 styling has been aerodynamically refined, yet retains the unmistakable identity of the series. The rear mounted engine is the hallmark of the 911 series, powered by a water cooled, horizontally opposed six-cylinder unit. This 3.6 liter powerplant is coupled with twin-turbochargers, yielding an awesome 400 plus horsepower output. The six speed gearbox efficiently transmits this abundance of power to the rear wheels. Front MacPherson strut and rear multi-link suspension system has a sophisticated geometry for the utmost control during high speed running. The large, 380mm diameter brake disks are ventilated to take the racing abuse. They are equipped with ABS (anti-lock braking system), for the positive stopping power and safety. The unique front spoiler, with its up-turned ends, is the result of thorough wind tunnel testing. A huge, two tier rear spoiler is equipped with air ducts on both sides. The riveted over fenders add to its aggressive looks. During the 1995 Japanese GT Car Championships, Porsche entered a fleet of their GT2's, including three entries from Team Taisan. Each of Taisan's machines scored a victory during the season, bringing the coveted title to the team.
29,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Toyota Celica Straßenversion

Art.Nr.: 300024215 Artikelbezeichnung: 1:24 Toyota Celica Straßenversion First announced at the Detroit Auto Show as the "Toyota XYR", this 7th inception of the Celica debuted on Sept. 20, 1999 showing outstanding form. Targeted specifically at the younger drivers, it features a streamlined unison of power and style. MacPherson struts make up the front suspension and a new double wishbone suspension makes up the rear, which in addition to heightening stability, gives rise to sharp handling for a throughly exciting driving experience. Toyota's commitment to individualism and high performance has once again paid off with their latest version of the Celica sports specialty car. About the model: This is the 1/24 scale assembly model kit based on the 7th incarnation of the Toyota Celica. Overall length: 182mm, overall width: 81mm. Stylish form has been authentically recreated. Door trim and inner panels ahve been finished in smooth foam. "Cross-over cockpit" features separately molded inner door piece recreated in stunning detail. Steering wheel can be assembled on either right or left side. Front struts, rear double wishbone suspension, exhaust pipe, and chassis under-surface all overflow with authenticity. Below the front undercover, the bottom of the engine and transmission can also been seen. Wheels and headlights have been prepared as metal plated parts. Nylon mesh for the openings in the front bumper also included. "Toyota" mark on the front has also been reproduced as metal transfer.
30,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Toyota Corolla WRC

Art.Nr.: 300024209 Artikelbezeichnung: 1:24 Toyota Corolla WRC In its long and illustrious career in the World Rally Championships, Toyota has mainly used the Celica as its flagship. In 1997, however, a rule change in the WRC presented Toyota with a chance to demonstrate its innovation. Permission was granted to equip the base of the Toyota's widely marketed production car with a turbo-charge and four-wheel drive system, as well as modify the engine without restriction. The more compact body of the Corolla was chosen for the development of the new rally car, and the Corolla WRC car was born. Using components tried and tested on the Celica, the Corolla WRC was equipped with a front loaded, 2-litre, 4-cylinder 3S-GTE turbo engine and 4-wheel drive. Highly reliable MacPherson struts make for a winning suspension on both the front and rear. In addition, the side of the steering column was equipped with a sequential shift lever, called a "joystick", allowing a 6-speed transmission control. With hydraulic brakes that automatically sense the movement of the wheels and a center differential equipped with a hang-on clutch, the Corolla WRC is stock full of the latest electronic gadgetry. A size smaller than the Celica, the Corolla WRC is perfectly suited for the winding country roads of the Rally. The Corolla WRC debuted in the Finland Rally of 1997, which led to a half year of testing before fully entering the WRC in 1998. Main drivers Carlos Sainz and Didier Auriol showed winning skill.
28,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Toyota G.R. TS050 Hybrid LM F103GT

Art.Nr.: 300024349 Art.bezeichnung: 1:24 Toyota G.R. TS050 Hybrid LM 2018 was a truly landmark year for TOYOTA GAZOO Racing and their TS050 Hybrid car, which made a huge splash in the racing world thanks to a refined design with great aerodynamics and a hybrid powertrain pairing a 2.4-liter engine and lithium-ion battery. Now, following on from Mini 4WD and R/C models, the car is a welcome addition to the impressive stable of racing cars in the Tamiya 1/24 Sports Car Series. About the Model - This is a 1/24 scale plastic model assembly kit. Length: 194mm, width: 79mm, height: 44mm. - The form of the 2018 version of the TS050 Hybrid is captured with superb accuracy: updated aerodynamics components (both exterior and interior),   longer front fenders, and tweaked diffuser design. - A busy interior features depictions of the driver seat, lithium-ion battery and more. - Metal-plated part is used to recreate the silver section on the top of the cockpit. - Also included are decals for the numerous sponsor logos on the number 7 and 8 cars, plus masking stickers for use in the paint job. - Dedicated metal transfers recreate side mirror surfaces and headlight sections.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
52,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Toyota GT-One TS-020 LeMans ´99

Art.Nr.: 300024222 Artikelbezeichnung: 1:24 Toyota GT-One TS-020 LeMans ´99 About the Toyota GT-One TS020 "The Longest Day in France", also known as the 24 Hours of Le Mans endurance race, takes place two hundred kilometers southwest of Paris, in the city of Le Mans. This high-speed circuit is made up of public roads closed off for the race, which stretch to 13.6 kilometers in length-the world's longest circuit track. Throughout the long history of the Le Mans, two or three major manufacturers have always fought for the top honors, but the 1999 race boasted six major contenders. The Toyota GT-One TS020 led the grueling 24 hour event right up until one hour before the finish, when it was struck with an untimely tire blowout, but still managed to finish second. Subtle refinements to the sleek carbon fiber composite body of the GT-One TS020 were conducted in the pursuit of optimal aerodynamics. The 3600cc V8 twin turbo R36V engine also underwent various modifications, improving power, torque, and fuel efficiency. About the Model • 1/24 scale plastic assembly model kit based on the GT-One TS020 of the 1999 Le Mans. • Overall length: 202mm, overall width: 84mm. • This model boasts faithful recreation of innovative aerodynamics. • Highly detailed nose and diffuser-just like the full size car. • Rear cowl is removable, allowing modeler to view the detailed V8 twin turbo engine even after completion. • Kit includes decals for Car no. 1 and 3. • Masking seals are also included for accurate body painting.  
35,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Toyota Supra

Art.Nr.: 300024123 Artikelbezeichnung: 1:24 Toyota Supra During the early 1970's, the Toyota Motor Company of Japan ventured into the specialty car field, and soon established a reputation for producing cars with both quality and performance. Their "Supra" series is often described as a re-creation of Toyota's legendary 2000GT sports car, which was an excellent combination of high performance and elegance. Using their latest racing automotive technology, plus their uncanny design genius, the newly designed Supra made its sensational debut during February 1993. Massive and powerful are the words that can best describe this awesome specialty sports car. The top of the line Supra uses a 3-Liter, DOHC 24 valve, straight six cylinder, twin-turbocharged engine, capable of 320 horsepower and 43.6kg/m of torque. In contrast with the company's previous Supra model, which had a very fluid styling composed of gentle curves, the new Supra has a bold dramatic appearance due to its wider body and larger 17-inch wheels. An oversized rear wing has been installed to improve downforce performance during high-speed cruising. This Supra's newly refined suspension has one of the best road holding systems offered by any mass produced sports car, and with its ventilated disk brakes fitted at all corners, and the front end utilizing four piston calipers, it has unmatched stopping power.
27,49 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Volkswagen Käfer 1300 1966

Art.Nr.: 300024136 Artikelbezeichnung: 1:24 Volkswagen Käfer 1300 1966 Even in this age of sophistication, the popularity of the Volkswagen "Beetle" has not diminished. The original design dates back to the 1930"s when Dr. Ferdinand Porsche provided the design framework for the "People"s Car." Today, with more than 20 million units produced, the Volkswagen Beetle has become a symbol of mass-produced motorization, with no other vehicle exceeding this figure. Built upon the sturdy platform chassis is the amazingly reliable air cooled, flat-four cylinder engine. Suspension is four wheel independent for crisp handling and driving comfort. Although the onset of the Second World War greatly hindered Volkswagen"s marketing opportunities, it made a superb comeback shortly following the conflict, under the skillful guidance of Heinrich Nordhoff. Throughout its production life, the Volkswagen was continuously improved to meet modern automobile standards. An enlarged powerplant displacement and better visibility are two of the notable changes that enabled the Beetle to set standards for the compact car market, decade after decade. The 1966 Volkswagen model is regarded as the classic Beetle, one that retains the most of the original design traits, and it has become a collector"s item. Even today, more than half a century later, watching a nimble street bug is still a pleasant sight to behold, and its unmistakable shape will likely delight generations to come.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
26,49 €
inkl. Mwst. zuzüglich Versandkosten

1:32 Bo.F-15E Strike Eagle Bunker Buster

Art.Nr.: 300060312 Artikelbezeichnung: 1:32 Bo.F-15E Strike Eagle Bunker Buster About the Boeing F-15E Strike Eagle w/"Bunker Buster" The McDonnell Douglas F-15 Eagle is regarded as one of the most capable twin-engine air-superiority fighters in the world today. Ever since its maiden flight in July 1972, this record breaking Mach 2.5 fighter has been a yardstick for jet fighter design. In the early 1980's, the Air Force requested McDonnell Douglas to modify their F-15 fighter into a dual-role aircraft to be known as the F-15E "Strike Eagle" for use as an air-to-air fighter, and for air to ground attack missions. This new version was designed to penetrate deep into enemy territory unescorted, and strike military targets with pinpoint accuracy. The strike eagle employs two highly reliable Pratt & Whitney F100-PW-229 engines and was designed specifically as a two-person crew of pilot and weapons system officer. The LANTRIN (Low Altitude Navigation and Targeting Infra-Red for Night) system enables the Strike Eagle to operate at night and in bad weather. The Strike Eagle can also be employed with up to an 11-ton payload and can carry the GBU-28 Bunker Buster, a guided bomb developed to destroy strengthened underground bunkers. The Strike Eagle was first deployed in December 1989. During the Gulf War in 1991, 2 squadrons of 48 F-15E Strike Eagles demonstrated their power as multi-purpose fighter/attack planes. About the model The popular F-15E Strike Eagle (item 60302) was released in 1993. However, since this items release, the F-15E has come to be equipped with a variety of newly developed weapons systems. Following the changes in times and aviation fighting technology Tamiya has modernized its kit to feature accurate replicas of all the latest weapons systems employed by the F-15E Strike Eagle. Includes parts for replication of the GBU-28 "Bunker Buster", as well as AGM-130 and JDAM guided bombs, and ARAAM air-to-air missiles. 1/32 scale, total length 600, total width 404mm. Faithfully recreates intrepid form of Strike Eagle. Main parts such as fuselage and wings are to be fastened with screws.Radar unit/nose side-access panel, and Vulcan Cannon hatch can all be opened and closed after assembly. Canopy and air brakes can be assembled in either the up or down positions. Cockpit, radar, and Vulcan Cannon are all recreated down to the finest details. Each landing gear is brilliantly crafted in die-cast, and tires are fashioned with synthetic rubber.Each landing gear is brilliantly crafted in die-cast, and tires are fashioned with synthetic rubber.     Achtung! Nicht für Kinder unter 14 Jahren geeignet.
129,99 €
inkl. Mwst. zuzüglich Versandkosten

1:32 DeHavilland Mosquito FB Mk.VI

Art.Nr.: 300060326 Art.bezeichnung: 1:32 DeHavilland Mosquito FB Mk.VI The "Wooden Wonder" makes an appearance in highly impressive 1/32 scale! That was the nickname given to the De Havilland Mosquito series of aircraft, an ingenious and beautiful design which saw the versatile airplane made almost entirely of wood. By the late 1930s, when design work on the Mosquito started, metal was the overwhelmingly favored medium. However, the Mosquito's designer foresaw that metal would become a precious resource in the probable war ahead; what was more, his highly lightweight wooden aircraft would be able to outrun heavier metal opponents. Constructed mainly from balsa wood sandwiched between sheets of birch, the Mosquito was originally designed as a weaponless bomber; once the armed forces and designers realized that the aircraft could withstand enemy fire even if it was caught, a number of variants were produced. The FB Mk.VI debuted in Spring 1943: this fighter-bomber variant packed four 7.7mm machine guns in the nose, plus four powerful 20mm autocannons and the ability to mount four 500lb bombs. Its outstanding speed and range ensured that the FB Mk.VI was used in a range of missions, including raids on important targets and infrastructure in the German homeland. It is often said that, until the advent of the Messerschmitt Me262, the German Luftwaffe did not have an adequate response to the "Mossie."     Achtung! Nicht für Kinder unter 14 Jahren geeignet.
199,99 €
inkl. Mwst. zuzüglich Versandkosten

1:32 F-15 JASDF EAGLE

Art.Nr.: 300060307 Art.bezeichnung: 1:32 F-15 JASDF EAGLE This plastic assembly kit reproduces the F-15J Eagle, which has protected Japanese skies as the main fighter of the Japan Air Self-Defense Force (JASDF) since it was first introduced in 1982. The distinguishing features of the F-15J, such as the mass balances on the vertical fins, antennas under the nose, and cockpit layout, have all been faithfully replicated. The incorporation of screws and die-cast metal landing gear legs ensure a strong model. At the same time, the radome and access hatches may be posed open to reveal exquisite details. The air intakes are movable while the canopy and airbrake may be posed in either open or closed positions. Comes with parts for an array of weapons, one pilot figure, and markings to depict aircraft from eight JASDF units.
134,99 €
inkl. Mwst. zuzüglich Versandkosten

1:32 F-4E PHANTOM II EARLY PROD.

Art.Nr.: 300060310 Artikelbezeichnung: 1:32 F-4E PHANTOM II EARLY PROD. About the McDonnell Douglas F-4E Phantom II Early Production The F-4E came into production as an improved version of the F-4C/D and was to be the most advanced model of the Phantom series. After elongating the fighter's nose and installing a more compact radar, the solid-state Westinghouse AN/APQ-120, the installation of a nose-mounted gun became possible and a 20mm M61A1 6 barrel Vulcan gun pod was employed. The Vulcan 20mm cannon, with its ammunition drum of approximately 640 rounds, was capable of firing 4000-6000 rounds a minute and proved reliable in air-to-ground and close quarters aerial combat. F-4E made its first flight in June 1967 and entered the rising conflict of the Vietnam War in November 1968 when the first F-4E's reached Korat in Thailand and joined up with the 469th Tactical Fighter Squadron. By the time of the cease-fire of 1973 the F-4E was credited with a total of 21 MiG kills, 5 brought down by gunfire alone. About the Model •Assembly kit of the early production version of the F-4E Phantom II main fighter of the U.S. Airforce. •Scale: 1/32, fuselage length: 600mm, wingspan: 368mm. The intrepid form of the F-4E Phantom with its characteristically elongated nose, has been accurately reproduced. •Fuselage has been molded as one piece with intricate areas faithfully recreated. Main pieces can be fastened to fuselage with screws. •Plane's nose can be reproduced with clear parts to allow viewing of the details of the 20mm M61A1 6 barrel Vulcan gun pod and AN/APQ-120 radar after model assembly. •Exquisite detail of cockpit and instrument panels portrayed in superb detail. Canopy can be assembled in the open or closed position. •Landing gear reproduced with dye-cast parts and tires are recreated with real rubber. •Parts for recreation of full armament, such as air-to-air missiles, are included in kit. Kit also features pilot and co-pilot figures as well as decals for replication of  two different planes.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
142,99 €
inkl. Mwst. zuzüglich Versandkosten
Versandinformation

Wenn Sie diesen Artikel in den Warenkorb legen, ist die Lieferadresse Ihrer Bestellung auf folgende Länder beschränkt:

nach oben