Diese Website verwendet Cookies. Durch die Nutzung der Website stimmen Sie der Verwendung von Cookies zu.
OK
Tamiya CarsonMajoretteDickie ToysSchuco 

1:35 WWII Rus.KPz T-34/76 1942/43 (3)

Art.Nr.: 300035059 Artikelbezeichnung: 1:35 WWII Rus.KPz T-34/76 1942/43 (3) Im 2. Weltkrieg wurden nahezu 40.000 Stück dieses Panzer-Typs T-34 inklusive aller Abarten hergestellt. Unser Modell stellt eine Version mit größerem Turm dar, wodurch für die Crew ein größerer Innenraum zur Verfügung stand. Eine große Rolle spielte der T-34/76 bei der Schlacht um Kursk.
24,99 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII SdKfz.139 Jgdp.Marder III (2)

Art.Nr.. 300035248 Artikelbezeichnung: 1:35 WWII SdKfz.139 Jgdp.Marder III (2) Die Deutsche Wehrmacht entschloß sich, die von den Russen erbeutete 7,62 cm Panzerabwehrkanone zu verbessern. Nach der Verbesserung konnten diese Kanonen 122 mm Panzerplatten auf einer Entfernung von 1000 m durchschlagen. Die Kanonen wurden dann auf das Fahrgestell von veralteten Panzern montiert. Mit 2 Figuren.
42,49 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII SdKfz.142/1 Sturmgesch.IIIG(2)

Art.Nr.: 300035197 Artikelbezeichnung: 1:35 WWII SdKfz.142/1 Sturmgesch.IIIG(2) In einer bisher unerreichten Vielfalt zeigt TAMIYA hier Plastikmodelle, die in ihrer Ausführung, Detaillierung, Konstruktion und Passgenauigkeit ihresgleichen suchen. Diese Modelle halten jeder Qualitätsprüfung stand und geben Einblick in Waffentechnik und Entwicklung.
40,99 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII SdKfz.161/1 Panzer IV H Fr.(1)

Art.Nr.: 300035209 Artikelbezeichnung: 1:35 WWII SdKfz.161/1 Panzer IV H Fr.(1) In einer bisher unerreichten Vielfalt zeigt TAMIYA hier Plastikmodelle, die in ihrer Ausführung, Detaillierung, Konstruktion und Passgenauigkeit ihresgleichen suchen. Diese Modelle halten jeder Qualitätsprüfung stand und geben Einblick in Waffentechnik und Entwicklung.
41,49 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII SdKfz.161/2 Panzer IV J (1)

Art.Nr.: 300035181 Artikelbezeichnung: 1:35 WWII SdKfz.161/2 Panzer IV J (1) Der Panzerkampfwagen IV hatte eine 75 mm KwK40 L/48 Kanone als Hauptkanone. Die Ausf. J hatte eine sehr viel einfachere Konstruktion als seine Vorfahren und ein zusätzlicher Treibstofftank trat an die Stelle von Hilfsmaschine / Generator. Damit konnte die Reichweite von 210 km auf 320 km erhöht werden. Mit 1 Figur.
45,99 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII SdKfz.161/3 Möbelwag. 3,7cm(1)

Art.Nr.: 300035237 Artikelbezeichnung: 1:35 WWII SdKfz.161/3 Möbelwag. 3,7cm(1) In einer bisher unerreichten Vielfalt zeigt TAMIYA hier Plastikmodelle, die in ihrer Ausführung, Detaillierung, Konstruktion und Passgenauigkeit ihresgleichen suchen. Diese Modelle halten jeder Qualitätsprüfung stand und geben Einblick in Waffentechnik und Entwicklung.
44,49 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII SdKfz.162 Jagdpanzer IV L/70

Art.Nr.: 300035088 Artikelbezeichnung: 1:35 WWII SdKfz.162 Jagdpanzer IV L/70 Jagdpanzer IV mit starker Frontpanzerung und Seitenschürzen, mit langem Rohr. "E""-Status-a.""A""Stat.nicht """ setzen
28,99 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII SdKfz.163 Sturmgeschütz IV(1)

Art.Nr.: 300035087 Artikelbezeichnung: 1:35 WWII SdKfz.163 Sturmgeschütz IV(1) In einer bisher unerreichten Vielfalt zeigt TAMIYA hier Plastikmodelle, die in ihrer Ausführung, Detaillierung, Konstruktion und Passgenauigkeit ihresgleichen suchen. Diese Modelle halten jeder Qualitätsprüfung stand und geben Einblick in Waffentechnik und Entwicklung.
20,99 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII SdKfz.171 Panther Aus.G Fr.(1)

Art.Nr.: 300035170 Artikelbezeichnung: 1:35 WWII SdKfz.171 Panther Aus.G Fr.(1) Der Type G Panzer besaß geneigte Panzerung, einen starken 700 PS Maybach V12-Motor und einem auf dem Rumpf weit zurückgestzten Turm mit einer 75mm Kwk42 L/70 Kanone. Die Hauptkanone hatte durch die sehr lange Triebladung und die hohe Mündungsgeschwindigkeit eine weit verheerendere Wirkung als ihre Größe von 75mm vermuten ließ.
41,49 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII SdKfz.171 Panther G Späte.(2)

Art.Nr.: 300035176 Artikelbezeichnung: 1:35 WWII SdKfz.171 Panther G Späte.(2) Der Type G Panzer wurde erstmals im Frühjahr 1943 massenweise produziert. Er besaß geneigte Panzerung und einen auf den Rumpf weit zurückgesetzten Turm mit einer 70mm Kwk42 L/70 Kanone.
44,49 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII SdKfz.171 Panther G Stahll.(1)

Art.Nr.: 300035174 Artikelbezeichnung: 1:35 WWII SdKfz.171 Panther G Stahll.(1) In einer bisher unerreichten Vielfalt zeigt TAMIYA hier Plastikmodelle, die in ihrer Ausführung, Detaillierung, Konstruktion und Passgenauigkeit ihresgleichen suchen. Diese Modelle halten jeder Qualitätsprüfung stand und geben Einblick in Waffentechnik und Entwicklung. Mit 1 Figur.
56,99 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII SdKfz.173 Jagdpanther Spät.(1)

Art.Nr.: 300035203 Artikelbezeichnung: 1:35 WWII SdKfz.173 Jagdpanther Spät.(1) Die furchterregende Pak43/3, L71 88mm Kanone wurde auf das Chassis des Panther-Panzers montiert. Mit einem Gewicht von 46 Tonnen und vom starken Maybach V-12 Motor angetrieben, besaß dieser Jagdpanzer ein ausgewogenes Verhältnis von Feuerkraft, Schutz und Beweglichkeit. Mit 1 Figur.
36,99 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII SdKfz.181 PzKpfw.VI Tiger I E

Art.Nr.: 300035146 Artikelbezeichnung: 1:35 WWII SdKfz.181 PzKpfw.VI Tiger I E Der deutsche Panzer Tiger I wurde im Jahre 1942 konstruktioniert. Die Spätversion des Tiger I wurde im Januar 1944 herausgebracht. Änderungen am Turm waren unter anderem: eine Kommandant-Luke mit sieben Sechschlitzen, eine schwenkbare Flugabwehrmaschinenkanone, und ein innenangebrachter "S" fürmiger Minenauswurf.
50,99 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII SdKfz.181 Tiger I Mit.Prod.(1)

Art.Nr.: 300035194 Artikelbezeichnung: 1:35 WWII SdKfz.181 Tiger I Mit.Prod.(1) Der Tiger hatte die 88mm KwK 36 L/56 als Hauptkanone, eine 100mm dicke Panzerung an den Vorderseiten und jeweils 80mm an den Seiten. Im Inneren des Tigers war Platz für den Fahrer, den Bugschützen/Funker, den Hauptkampfbereich im Turm und den Motorraum.
42,49 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII SdKfz.182 Königstiger Por-T(1)

Art.Nr.: 300035169 Artikelbezeichnung: 1:35 WWII SdKfz.182 Königstiger Por-T(1) In einer bisher unerreichten Vielfalt zeigt TAMIYA hier Plastikmodelle, die in ihrer Ausführung, Detaillierung, Konstruktion und Passgenauigkeit ihresgleichen suchen. Diese Modelle halten jeder Qualitätsprüfung stand und geben Einblick in Waffentechnik und Entwicklung. Mit 1 Figur.
45,99 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII SdKfz.182 Pz VI Königstiger(1)

Art.Nr.: 300035164 Artikelbezeichnung: 1:35 WWII SdKfz.182 Pz VI Königstiger(1) Der Königstiger hatte eine Typ 43 L71, 88mm Hauptgeschütz, welche bei einer Entfernung von 1000m 170mm dicke Panzerplatten durchdringen konnten. Der Antrieb erfolgte über einen Maybach HL230 P30 V12 Zylinder, flüssigkeitsgekühlten Motor, welcher 700 PS erzeugte.
46,99 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII SdKfz.222 Späh-Pz.Nord Afr.(3)

Art.Nr.: 300035286 Artikelbezeichnung: 1:35 WWII SdKfz.222 Späh-Pz.Nord Afr.(3) About the Sd.Kfz.222 Among the many armored cars developed by Germany in WWII, the Sd.Kfz.222 is one of the most widely recognized. This light 4x4 vehicle had a distinctive hull shape thanks to its welded construction, and featured an open turret with mesh covers to protect the 3 crew members against grenades and shrapnel. It was armed with a 20mm cannon and 7.92mm machine gun and its exceptional off-road capability made it an excellent reconnaisance vehicle. About the Model •High-quality 1/35 scale assembly kit model of the Sd.Kfz.222 armored car. •Sharp, angular form of hull and turret accurately reproduced. •Open turret enables depiction of interior details such as the 20mm cannon, which features a metal barrel for enhanced realism. •Photo-etched parts for turret mesh covers included for even more detail. •Parts included for a DKW motorcycle and new parts such as hull-mounted tool box and headlight are also planned. •3 new figures are included in this kit: 1 commander and 1 radio operator located in the turret, and 1 motorcycle rider figure that can be modelled with different facial expressions and poses. •3 different types of markings are being planned.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
42,49 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII SdKfz.223 Leichter Späh.Pz (2)

Art.Nr.: 300035268 Art.bezeichnung: 1:35 WWII SdKfz.223 Leichter Spähpanzer (2) Das Modell WWII SdKfz. Leichter Spähpanzer im Maßstab 1:35 hat eine Länge von 140 mm.
24,99 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII Sdkfz.251/1 Halbk. Hanomag (5)

Art.Nr.: 300035020 Artikelbezeichnung: 1:35 WWII Sdkfz.251/1 Halbk. Hanomag (5) In 1938, the German Army decided to develop an armoured personnel carrier on the basis of the 3-ton half track (HL-KL-9p). Hanomag Hannoversch Machinenbau (AG) in Hannover was ordered to develop the running gear and Bussing-NAG in Berlin was to develop the superstructure to be armoured. Design work was hastened on the model of existing armoured cars and a prototype was completed at the end of 1938. The Germans tested the prototype in the Kumahsdorf Proving Ground and accepted it for mass production. Thus was born the Armoured Personnel Carrier Hanomag Sdkfz 251/1 which, we may safely say, was a synonym for the German mechanized corps that showed activity in all battlefields throughout the war.
16,99 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII SdKfz.251/1 Halbk. Transp.(4)

Art.Nr.: 300035195 Artikelbezeichnung: 1:35 WWII SdKfz.251/1 Halbk. Transp.(4) Die D-Version erschien 1943. Ausgerüstet mit der Maybach HL42 Sechszylindermaschine besaß er eine Höchstgeschwindigkeit von 53km/h. Er war mit zwei MG42 Maschinengewehren sowie automatischen Gewehren für die Mannschaft bewaffnet und konnte 12 voll ausgerüstete Soldaten transportieren.
31,99 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII SdKfz.251/1 Hk Stuka z.Fuss(4)

Art.Nr.: 300035151 Artikelbezeichnung: 1:35 WWII SdKfz.251/1 Hk Stuka z.Fuss(4) Eine der Varianten des Sd.Kfz. 251 Infanterie-Halbketten-Fahrzeug bezeichnete man Sd.Kfz. 251/1 mit Wurfrahmen. Dieses Gerät konnte auf außen angebrachten Trägern sechs Kurzstreckenraketen bzw. Nebelgranaten mit einer Größe von 28cm und 32cm aufnehmen.
35,99 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII SdKfz.251/9 Halbk. 7,5cm KwK

Art.Nr.: 300035147 Artikelbezeichnung: 1:35 WWII SdKfz.251/9 Halbk. 7,5cm KwK Obwohl ursprünglich als ein bewaffnetes Personenbeförderungsmittel entwickelt, ermöglicht seine große Mobilität und Vielseitigkeit die verschiedenartigsten Einsätze. Er war ausgerüstet mit einer 75mm KwK37 L/24 Kanone.
31,99 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII SdKfz.9 Famo 18to Halbkette(8)

Art.Nr.: 300035239 Artikelbezeichnung: 1:35 WWII SdKfz.9 Famo 18to Halbkette(8) About the Model •1/35 plastic assembly kit of the largest half-track in the German Army. •Overall Length: 243mm, Overall Width: 75mm. •Highly detailed model captures the size and tank-towing power of the FAMO. •Realistic treads and suspension. •Synthetic rubber front tires and steerable front wheels for maximum realism. •Rear gate and storage doors can be assembled in the open or closed position. •Tank towing drawbar included. •Can be assembled with or without engine side panels, revealing fully detailed engine. •Engine can be assembled outside of FAMO. •Eight figures (four variations) included.
85,99 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII Tiger I Init./Frühe Produktion

Art.Nr.: 300035227 Artikelbezeichnung: 1:35 WWII Tiger I Init./Frühe Produktion In einer bisher unerreichten Vielfalt zeigt TAMIYA hier Plastikmodelle, die in ihrer Ausführung, Detaillierung, Konstruktion und Passgenauigkeit ihresgleichen suchen. Diese Modelle halten jeder Qualitätsprüfung stand und geben Einblick in Waffentechnik und Entwicklung.
46,99 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII U.S.M8 Haubitze m.Figuren (3)

Art.Nr.: 300035312 Artikelbezeichnung: 1:35 WWII U.S.M8 Haubitze m.Figuren (3) During WWII, the frst American fully tracked Self Propelled Howitzer was the M8. It used the chassis of the M5 and had an open topped turret which was armed with a 75mm Howitzer and 12.7cm M2 machine gun. From September 1942 to January 1944, approximately 1,800 units were produced with the firstM8 seeing action from mid 1943. They were seen used at the Italian and North West European fronts as well as the Pacific Theater for fire support duties. Even after WWII, the M8 could be seen in service with the French army during the Indochina Wars.
27,49 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII US 2.5to Transport LKW GMC(1)

Art.Nr.: 300035218 Artikelbezeichnung: 1:35 WWII US 2.5to Transport LKW GMC(1) Der 2 1/2 Tonner Lastwagen, bekannt als "Jimmy" oder "Zweieinhalber" hatte einen Typ 270 Motor mit einem Hubraum von 4.416 cm³, der 104 PS leistet. Die Leistung wurde mit einem Fünfganggetriebe auf die Räder übertragen, das Getriebe war direkt am Kupplungsgehäuse hinter dem Motor anmontiert.
41,49 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII US 40to Transp.Dragon Wag.(4)

Art.Nr.: 300035230 Artikelbezeichnung: 1:35 WWII US 40to Transp.Dragon Wag.(4) Die Produktion vom M25 Panzertransport-Fahrzeug wurde im April 1943 aufgenommen. Mit einer Geasamtlänge von 17,48m und einem Gewicht von 34 Tonnen, einer gepanzerten Kabine mit einzigartigem Aussehen und einem kettengetribenen Hinterradantrieb war es einer der grössten Fahrzeuge des Zweiten Weltkriegs. Länge des Modells: 510 mm 649 Bauteile Mit 4 Figuren.
115,99 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII US Ford GPA Amphibien-Fhz. (3)

Art.Nr.: 300035336 Artikelbezeichnung: 1:35 WWII US Ford GPA Amphibien-Fhz. (3) The Ford GPA was a unique vehicle which was deployed not only on the U.S. side by the Army and Marine Corps, but also later by Russian forces. It was often called a "seep" (an abbreviation of "seagoing jeep") on account of its amphibious nature. The front-engine 4WD vehicle shared much of its design and parts (including the engine) with Ford's GPW. Around 12,800 units were produced by 1943. This kit includes a variety of new parts to update Item 35043 U.S. Amphibian Ford GPA Kit.
33,99 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII US M20 Spähpanzer (2)

Art.Nr.: 300035234 Artikelbezeichnung: 1:35 WWII US M20 Spähpanzer (2) About the U.S. M20 Armored Utility Car A derivative of the U.S. M8 Light Armored Car Greyhound, the U.S. M20 Armored Utility Car rolled onto the battlefield in 1943. The rotating turret of the M8 was removed, allowing space for passenger seats, a commanders table, radio sets and a ring mounted M2 heavy machine gun. The M20 was mainly deployed to the Tank Destroyer Unit, where its top speed of about 90km/h was taken advantage of in command, cargo, and reconnaissance duties. About the Model •This plastic assembly model kit is based on the U.S. M20 Armored Utility Car. •The low body with an open-top has been richly recreated in 1/35th scale. •The passenger seats, folding commander's table, and radio sets all overflow with authenticity. •Kit also features a bazooka, ammunition cartridges, ring mounted M2 heavy machine gun and other detailed accessories. •Two lifelike figures for the commander and driver are also included
31,49 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII US M5A1 Leicht Pz.m.Mörser (4)

Art.Nr.: 300035313 Artikelbezeichnung: 1:35 WWII US M5A1 Leicht Pz.m.Mörser (4) The M5A1 light tank which was developed from the M3 Stuart light tank was put into production from January 1943. It was powered by twin four-stroke V8 300hp Cadillac gasoline engines which enabled a top speed of 58km/h. It came armed with a 37mm main gun and two 7.92mm machine guns and featured additional armor plating on the turret's right side to protect the anti-aircraft machine gun. Approximately 6,800 units were produced and were mainly used in reconnaissance roles at the Italian and North West European Fronts.
28,49 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII US Militär Polizei Motorrad(2)

Art.Nr.: 300035084 Artikelbezeichnung: 1:35 WWII US Militär Polizei Motorrad(2) In einer bisher unerreichten Vielfalt zeigt TAMIYA hier Plastikmodelle, die in ihrer Ausführung, Detaillierung, Konstruktion und Passgenauigkeit ihresgleichen suchen. Diese Modelle halten jeder Qualitätsprüfung stand und geben Einblick in Waffentechnik und Entwicklung.
6,39 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII US Mitl.Pz. M4 Sherman Fr.(3)

Art.Nr.: 300035190 Artikelbezeichnung: 1:35 WWII US Mitl.Pz. M4 Sherman Fr.(3) Bewaffnet mit einer 75mm M3 Kanone und von einem 350 PS luftgekühlten Continental R975-C1 Sternmotor angetrieben, erreichte der M4A1 Sherman eine Spitzengeschwindigkeit von 38,6km/h. Die Produktion begann im Juli 1942, fünf Monate später wurde dann aber schon der Nachfolger, der M4A1 produziert.
33,99 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII US Panzer T26E4 Super Pershing

Art.Nr.: 300035319 Artikelbezeichnung: 1:35 WWII US Panzer T26E4 Super Pershing About the M26 Pershing Development of what would become the M26 Pershing began in 1942. It was to be a replacement for the M4 Sherman, which was the standard U.S. Army tank at the time, and features such as a lower profile hull and cast turret were incorporated during the development process of the various prototypes. This eventually culminated in the T26E1 prototype armed with the 90mm M3 gun, and from that stemmed the production version which was called the T26E3. The first T26E3s were sent to Europe in January 1944, and as they were deployed to the battlefield, they were re-designated M26. Although over 300 reached the theater before the end of the war, only 20 actually saw combat. In these limited actions, the M26s proved capable of defeating the German Panther and Tiger tanks they were designed to counter. About the T26E4 "Super Pershing" Although the standard M26 Pershing's 90mm M3 gun was powerful, it was not on par with the German King Tiger heavy tank's gun. Thus the T15E1 90mm gun, which was larger in caliber and fired a one-piece shell at a higher muzzle velocity, was developed. This gun was fitted onto a modified T26E1 prototype, and featured cylindrical stabilizers mounted on the turret to cope with the longer length of the gun barrel. This was the first "Super Pershing" and it was sent to Europe as well, where it was involved in just a handful of engagements against German tanks. The second "Super Pershing" was created by modifying a T26E3. This was designated T26E4 and was armed with a T15E2 90mm gun that fired a two-piece ammunition and a redesigned gun mount to eliminate the need for the stabilizers. This pre-production T26E4 "Super Pershing" was not sent to Europe. The modifications that were tested on this pre-production T26E4 were incorporated into the actual production-spec T26E4s, of which 25 were built before production was canceled
60,99 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII US Sherman M4A3 105mm Haub.(9)

Art.Nr.: 300035251 Artikelbezeichnung: 1:35 WWII US Sherman M4A3 105mm Haub.(9) Der M4A3 besaß einen 500 PS Ford GAA-3 V8 wassergekühlten Benzinmotor. Etwa 500 M4A3 wurden zwischen Mai und September 1944 im Crysler-Werk Detroit hergestellt. Sie verfügten über eine 76 mm Kanone. Mit 4 Figuren.
40,49 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII US SpähPz M8 Greyhound (1)

Art.Nr.: 300035228 Artikelbezeichnung: 1:35 WWII US SpähPz M8 Greyhound (1) In einer bisher unerreichten Vielfalt zeigt TAMIYA hier Plastikmodelle, die in ihrer Ausführung, Detaillierung, Konstruktion und Passgenauigkeit ihresgleichen suchen. Diese Modelle halten jeder Qualitätsprüfung stand und geben Einblick in Waffentechnik und Entwicklung. Mit 1 Figur.
33,99 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII US Willys Jeep MB 4x4 (1)

Art.Nr.: 300035219 Artikelbezeichnung: 1:35 WWII US Willys Jeep MB 4x4 (1) In einer bisher unerreichten Vielfalt zeigt TAMIYA hier Plastikmodelle, die in ihrer Ausführung, Detaillierung, Konstruktion und Passgenauigkeit ihresgleichen suchen. Diese Modelle halten jeder Qualitätsprüfung stand und geben Einblick in Waffentechnik und Entwicklung.
19,99 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII Zimmerit Bogen Panther G Early

Art.Nr: 300012646 Artikelbezeichnung: 1:35 WWII Zimmerit Bogen Panther G Early Simulating Zimmerit on military models using putty enhances the model's presence but at the same time it requires advanced skills and is time consuming. Made for the novice to intermediate modeler in mind, these stickers enable reproduction of Zimmerit on Item 35170 German Panther Ausf.G Early Production without the use of putty or more advanced modeling techniques.
13,29 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII Zimmerit Dekor-Satz Elefant

Art.Nr.: 300012644 Artikelbezeichnung: 1:35 WWII Zimmerit Dekor-Satz Elefant Mit dem detaillierten Fotoätzteile-Zimmerit-Set für den schweren Kampfpanzer „Elefant" verleihen Sie Ihrem Modell auf einfache und komfortable Art und Weise ein vorbildgetreues Erscheinungsbild. Es sind zwei unterschiedliche Zimmeritmuster enthalten, um die Varianten des Bausatzes passend zu zeigen. Passend zu folgenden Modellen: N° 300035325 Schwerer Kampfpanzer Elefant WWII Lieferumfang: Zimmerit-Set 1:35
9,59 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII Zimmerit Dekor-Satz Tiger I

Art.Nr.: 300012647 Artikelbezeichnung: 1:35 WWII Zimmerit Dekor-Satz Tiger I Simulating Zimmerit on military models using putty enhances the model's presence but at the same time it requires advanced skills and is time consuming. This sticker sheet enables easy reproduction of Zimmerit on Item 35194 1/35 scale German Tiger I Mid Production and Item 35146 German Tiger I Late Production. By simply applying the stickers on the model and painting, a realistic Zimmerit effect can be achieved. 1:35
10,89 €
inkl. Mwst. zuzüglich Versandkosten

1:35 Zimm.Ph.Ätzt.f.Königstiger Porsch.

Art.Nr.: 300012649 Artikelbezeichnung: 1:35 Zimmerit Photoätz.f.Königstiger Porsche Mit dem detaillierten Fotoätz-Zimmerit-Set für den Königstiger Porsche-Turm verleihen Sie Ihrem Modell auf einfache und komfortable Art und Weise ein vorbildgetreues Erscheinungsbild. Passend zu folgenden Modellen: N° 300035169 German King Tiger „Porsche Turret" Lieferumfang: Zimmerit-Set 1:35
12,19 €
inkl. Mwst. zuzüglich Versandkosten

1:35 Zimmer. Ph.Ätzt. F.Panzer IV Ausf.J

Art.Nr.: 300012650 Artikelbezeichnung: 1:35 Zimmer. Ph.Ätzt. F.Panzer IV Ausf.J Mit dem detaillierten Fotoätz-Zimmerit-Set für den Panzer IV Ausf. J verleihen Sie Ihrem Modell auf einfache und komfortable Art und Weise ein vorbildgetreues Erscheinungsbild. Passend zu folgenden Modellen: N° 300035181 German Panzer IV Ausf. J Lieferumfang: Zimmerit-Set 1:35
12,19 €
inkl. Mwst. zuzüglich Versandkosten

1:35 Zimmerit Bogen Königstiger Henschel

Art.Nr.: 300012648 Artikelbezeichnung: 1:35 Zimmerit Bogen Königstiger Henschel Mit dem detaillierten Fotoätz-Zimmerit-Set für den Königstiger (Henschelturm) verleihen Sie Ihrem Modell auf einfache und komfortable Art und Weise ein vorbildgetreues Erscheinungsbild. Passend zu folgenden Modellen: N° 300035164 German King Tiger „Production Turret" N° 300035252 German King-Tiger „Ardennen" Lieferumfang: Zimmerit-Set 1:35
10,99 €
inkl. Mwst. zuzüglich Versandkosten

1:35 Zubehör-Set GMC Transp.LKW 35218

Art.Nr.: 300035231 Artikelbezeichnung: 1:35 Zubehör-Set GMC Transp.LKW 35218 In einer bisher unerreichten Vielfalt zeigt TAMIYA hier Plastikmodelle, die in ihrer Ausführung, Detaillierung, Konstruktion und Passgenauigkeit ihresgleichen suchen. Diese Modelle halten jeder Qualitätsprüfung stand und geben Einblick in Waffentechnik und Entwicklung. Truck ist im Bausatz nicht enthalten.
10,39 €
inkl. Mwst. zuzüglich Versandkosten

1:35/1:16 WWII Figuren-Rangabzeichen

Art.Nr.: 300012625 Artikelbezeichnung: 1:35/1:16 WWII Figuren-Rangabzeichen Detailgetreuer Tamiya-Dekorbogen (Decal Set bzw. Abziehbilder) für deutsche Figuren des 2 Weltkrieges im Maßstab 1:16 sowie 1:35.
10,39 €
inkl. Mwst. zuzüglich Versandkosten

1:350 1:350 Dt. Schlachtschiff Tirpitz

Art.Nr.: 300078015 Art.bezeichnung: 1:350 Dt. Schlachtschiff Tirpitz The sole sister ship of the Bismarck, the Tirpitz was a perpetual worry for the Royal Navy since its presence in Norway was a threat to Allied convoys. Considerable resources were spent countering her potential moves until she was finally sunk by Royal Airforce bombers. Tamiya now brings you this marvel of German engineering as a highly-detailed 1/350 scale assembly kit display model. The elegant lines of the Tirpitz are accurately reproduced and distinguishing features that set her apart from the Bismarck such as quadruple torpedo tubes are also recreated in great detail. The model comes with a specially made display base and a beautiful nameplate for an impressive display.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
76,99 €
inkl. Mwst. zuzüglich Versandkosten

1:350 Brit. King George V Schlachtschiff

Art.Nr.: 300078010 Artikelbezeichnung: 1:350 Brit. King George V Schlachtschiff Dieser prächtige Maßstab lässt uns in eine neue Kategorie der Großschiffe hinübersegeln. Die Baureihe bringt eine Auswahl weltberühmter Schiffe, die groß genug sind, um von der hervorragenden Detaillierung zu profitieren, aber noch klein genug, um noch sinnvoll darstellbar zu sein. Unser hochgenauen Nachbildungen werden Sie sicher zufriedenstellen. Länge des Modells 649 mm   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
75,99 €
inkl. Mwst. zuzüglich Versandkosten

1:350 Dt. Schlachtschiff Bismarck

Art.Nr.: 300078013 Artikelbezeichnung: 1:350 Dt. Schlachtschiff Bismarck Die Bismarck, ihr Schwesterschiff war die Tirpitz, wurde im August 1940 in Dienst gestellt. Sie ging unter dem Kommando von Kapitän zur See Ernst Lindemann in Betrieb und war damals das größte und kampfstärkste Schlachtschiff. Sie konnte eine Höchstgeschwindigkeit von 30,1 Knoten (ca. 56km/h) erreichen. Ihre Bewaffnung bestand aus acht 380 mm QFG L/47 Zwillingsgeschützen, zwölf 150 mm QFG L/55 Zwillingsgeschützen, 16 105 mm L/65 A/A und 16 37 mm A/A und 12 20 mm A/A Kanonen. Sie sank Ende Mai während des zweiten Weltkriegs nach schwerem Gefecht mit Einheiten der britischen Royal Navy samt dem Großteil ihrer Besatzung im Nordatlantik.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
76,99 €
inkl. Mwst. zuzüglich Versandkosten

1:350 Geschützlauf 46cm & Projektile Set

Art.Nr.: 300012643 Artikelbezeichnung: 1:350 Geschützlauf 46cm & Projektile Set Mit dem detaillierten Metallset 46 cm Geschützläufe und Projektile für die Yamato und andere Schiffsmodelle im Maßstab 1:350 verleihen Sie Ihrem Modell auf einfache und komfortable Art und Weise ein vorbildgetreues Erscheinungsbild. Unter anderen passend zu folgenden Modellen: N° 300078025 Kampfschiff Yamato 1:350 N° 300078030 Kampfschiff Yamato 1:350 Lieferumfang Fotoätz-/Metallset Geschützrohre/Projektile
19,49 €
inkl. Mwst. zuzüglich Versandkosten

1:350 Jap. Schlachtschiff Yamato

Art.Nr.: 300078025 Artikelbezeichnung: 1:350 Jap. Schlachtschiff Yamato Das neueste 1:350 Modell des japanischen Kriegsschiffes Yamato stellt diese bei ihrem letzten und endgültigen Einsatz in Okinawa dar. Das Original war ein motorisierter Bausatz, der 1979 erschien. Diesem folgte eine nichtmotorisierte Version 2005. Die aktuelle Modellversion beruht auf den neuesten Informationen, die die Modellentwickler von TAMIYA finden konnten. Elemente wie der Schiffsrumpf und der Deckaufbau wurden durch die errungenen Information grundlegend überholt.     Achtung! Nicht für Kinder unter 14 Jahren geeignet.
264,99 €
inkl. Mwst. zuzüglich Versandkosten

1:350 Jap. Schwerer Kreuzer "Tone"

Art.Nr.: 300078024 Artikelbezeichnung: 1:350 Jap. Schwerer Kreuzer "Tone" Commissioned in 1938, the Tone was the lead ship of her namesake class of heavy cruisers. She was 189.1m in length, and was powered by 4 turbines which allowed her to reach a top speed of 35kn. She had a range of 8,000 nautical miles at a 18kn cruising speed and was armed with 8 x 20cm/50 3rd year type guns (4 twin turrets), 8 x 127mm guns, 12 x 25mm AA guns, and 12 x 610mm torpedo tubes and also carried six floatplanes. During WWII, the Tone was present at many of the major Pacific Theater engagements. At the beginning of the war, the Tone was present during the attack on Pearl Harbor and also went on to see action at the Battle of Java Sea, Battle of Midway, Battle of the Eastern Solomons, Battle of Santa Cruz, Battle of the Phillipine Sea, and the Battle of the Leyte Gulf. In July, 1945 the Tone, along with most of the surviving large Japanese Navy warships, was based at the Kure Naval Arsenal. On July 24th, Task Force 38 launched a large scale air raid on Kure and Tone was hit by three bombs which sank her.     Achtung! Nicht für Kinder unter 14 Jahren geeignet.
164,99 €
inkl. Mwst. zuzüglich Versandkosten

1:350 Jap. Versorg.-Boote Marine (28)

Art.Nr.: 300078026 Artikelbezeichnung: 1:350 WWII Versorg.-Boote Jap.Marine(28) Dieses Set beinhaltet 28 Boote unterschiedlichen Typs (insg. 11 Typen). Des Weiteren verfügt diese Set über Fotoätzteile, welche das Deck detailgetreu darstellt. Das Set kann sowohl für den neuen 1:350 Yamato-Bausatz als auch für die anderen 1:350 WWII Schiffsmodelle der japanischen Marine verwandt werden.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
24,99 €
inkl. Mwst. zuzüglich Versandkosten

1:350 Jap. Yamato 2013 Schlachtschiff

Art.Nr.: 300078030 Artikelbezeichnung: 1:350 Jap. Yamato 2013 Schlachtschiff With many revolutionary features incorporated into her design, the Yamato was completed in December 1941, and met her final fate at the hands of American Navy carrier aircraft in the South China Sea while on a one way mission to Okinawa. This model features minor modifications to Tamiya"s previous Yamato replicas Items 78002 and 78014, and has her looking as she did just prior to departing for her final mission, in an exquisite 1/350 scale assembly kit display model. The Yamato"s massive imposing silhouette is accurately reproduced, and both the main gun turrets and secondary armament turrets can be rotated even after assembly. - Comes with a display stand. - Comes with newly-designed mast parts.     Achtung! Nicht für Kinder unter 14 Jahren geeignet.
105,99 €
inkl. Mwst. zuzüglich Versandkosten

1:350 Jp. U-Boot i-400

Art.Nr.: 300078019 Artikelbezeichnung: 1:350 Jp. U-Boot i-400 Created as part of a plan to attack major cities in the United States and the Panama Canal, the three I-400 class large aircraft carrier submarines were quite technologically advanced. Featuring an extremely long range and heavily armed with both torpedoes and deck guns, they were also equipped with catapults to launch their three Aichi M6A Seiran aircraft. While on their way to attack the Panama Canal, the submarines were ordered to attack the Allied naval base at Ulithi instead. However, hostilities ended before any attack could be launched. After surrendering to U.S. forces, the I-400 was eventually sailed to Hawaii, where they were studied and then scuttled. - High-quality 1/350 scale assembly kit model of the I-400 submarine. - Accurately reproduced hull features two-piece construction with upper and lower hull sections. - Hangar hatch may be modeled in both open and closed positions for increased display possibilities. - Details such as crane arm and antenna array realistically depicted with precision-made photo-etched parts. - Metal parts for propeller screw shafts provide additional detail. - Parts are included to allow depiction of the Seiran aircraft with wings in both extended and folded positions.   Furthermore, photo-etched parts are used for aircraft propellers and dollies. - Conveniently includes special display base.     Achtung! Nicht für Kinder unter 14 Jahren geeignet.
72,99 €
inkl. Mwst. zuzüglich Versandkosten

1:350 Kampfschiff Figuren-Set (144)

Art.Nr.: 300012622 Artikelbezeichnung: 1:350 Kampfschiff Figuren-Set (144) Recently, large 1/350 scale warships have become more popular with favorable sales of models like the Japanese Navy Submarine I-400. The 1/350 Crew Set will be released as detail up parts to complement our large 1/350 scale warships. This would surely add detail and increase interest in the models. About the model: This is a 1/350 Crew Set for warship model use. 1 Runner has a total of 48 figures (6 positions x 8 bodies) x 3 runners = 144 sailor model set Packaged in a plastic bag with header label (similar to Item: 12601)
14,89 €
inkl. Mwst. zuzüglich Versandkosten

1:350 US Marine Flugzeugset II (10)

Art.Nr.: 300078009 Artikelbezeichnung: 1:350 US Marine Flugzeugset II (10) U.S. Marinenflugzeug Bausatz mit einen McDonnell Douglas F-4S Phantom II, einen Grumman EA-6B Prowler, einen Grumman E-2C Hawkeye und einen Sikorsky SH-3H Sea King.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
7,19 €
inkl. Mwst. zuzüglich Versandkosten

1:350 US Navy Flugzeug-Set I (10)

Art.Nr.: 300078006 Artikelbezeichnung: 1:350 US Navy Flugzeug-Set I (10) U.S. Marinenflugzeug Bausatz mit zwei Grumman F-14A Tomcat, einen McDonnell Douglas F-18A Hornet, einen Vought A-7E Corsair II, einen Lockheed S-3A Viking und einen Grumman A-6E Intruder.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
7,19 €
inkl. Mwst. zuzüglich Versandkosten

1:350 WWII Brit.Kampfsch.Prince of Wales

Art.Nr.: 300078011 Artikelbezeichnung: 1:350 Brit. Prince of Wales Schlachts. Dieser prächtige Maßstab lässt uns in eine neue Kategorie der Großschiffe hinübersegeln. Die Baureihe bringt eine Auswahl weltberühmter Schiffe, die groß genug sind, um von der hervorragenden Detallierung zu profitieren, aber noch klein genug, um noch sinnvoll darstellbar zu sein. Unser hochgenauen Nachbildungen werden Sie sicher zufriedenstellen. Länge des Modells 649 mm   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
75,99 €
inkl. Mwst. zuzüglich Versandkosten

1:350 WWII Jap. Schwerer Kreuzer Chikuma

Art.Nr.: 300078027 Artikelbezeichnung: 1:350 WWII Jap. Schwerer Kreuzer Chikuma This is a highly detailed scale model replica in 1/350 scale of the Japanese Heavy Cruiser Chikuma. Historical background Chikuma was the last heavy cruiser the Imperial Japanese Navy constructed during WWII and was completed in May 1939 as the second ship of the Tone-class. Her four twin 20.3cm guns were located at the bow to enable unhindered operation of up to 6 floatplanes at the stern. Her design also enabled a top speed of 35 knots and a long range. She was assigned to the Carrier Mobile Fleet with her sister ship Tone. During the Pearl Harbor Attack in December 1941, her floatplanes carried out pre-attack reconnaissance over the Pearl Harbor, which greatly contributed to the IJN's success of the operation. She was also active during the Battle of Midway and the Solomon Islands campaign. During the Battle of the Leyte Gulf in October 1944, she was the flagship of Admiral Kurita's fleet and contributed to the sinking of the USS Gambier Bay but she was in turn damaged by torpedoes and scuttled off the coast of Samar Island.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
129,99 €
inkl. Mwst. zuzüglich Versandkosten

1:350 WWII Japanisch.Zerstörer Yukikaze

Art.Nr.: 300078020 Art.bezeichnung: 1:350 WWII Japanisch.Zerstörer Yukikaze January 20 1940 saw the completion of construction of the Japanese Kagero class destroyer. Along with her sister ships Hatsukaze, Amatukaze, and Tokitukaze, she became part of the 16th destroyer division under the command of the light cruiser Jintsu. At the beginning of WWII, the 16th destroyer division was part of the force which captured the Philippines, and on December 5 1941, she took part in the fierce fighting with American forces near Palau and supported the invading forces at Legazpi. After wards, she saw action throughout the Pacific Ocean at the Dutch East Indies, Midway, Guadalcanal, and the Solomon Islands. The Yukikaze also participated in the withdrawal of Guadalcanal,also participated in sea battles at the Marianas and the Leyte Gulf. Throughout WWII, the Yukikaze took part in numerous naval battles, escort duties, and supply runs, and always returned safely from each sortie. She was among the few Japanese warships and the onl yone of her class still operational at the end of the war, and can be called the "lucky destroyer." As part of the post-war reparation agreement, the Yukikaze was transferred to the Republic of China, and in 1966 she became a reserve training ship. This is a 1/350 full display model. Model depicts the Yukikaze as she appeared during the 1945 Ten Ichi Go operation (Battle for Okinawa). Parts included to build a waterline model or a display model with full hull. It is possible to rotate the guns and torpedoes after assembling thanks to polycaps. ABS has been used for the masts to ensure strength. Photo-etched parts are prepared for the ladders, radio antennas etc. Metal chains. Display stand included. Assembled model can be displayed in the package.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
81,99 €
inkl. Mwst. zuzüglich Versandkosten

1:350 WWII US Zerstörer DD445 Fletcher

  Achtung! Nicht für Kinder unter 14 Jahren geeignet.
33,49 €
inkl. Mwst. zuzüglich Versandkosten

1:350 WWII Yamato Holz-Deck Dekor

Art.Nr.: 300012645 Artikelbezeichnung: 1:350 WWII Yamato Holz-Deck Dekor Mit dem detaillierten Holz-Deckdekorset für das japanische Kampfschiff Yamato verleihen Sie Ihrem Modell auf einfache und komfortable Art und Weise ein vorbildgetreues Erscheinungsbild. Das einzigartige Holzdekor ist 0,25 mm dünn und zeigt die feine Maserung und Textur. So wird ihr Schiffsdeck zum feinen Kunstwerk. Passend zu folgenden Modellen: N° 300078025 Kampfschiff Yamato 1:350 Lieferumfang: Holz-Deckdeko 1:350
28,49 €
inkl. Mwst. zuzüglich Versandkosten

1:48 BRISTOL BEAUFIGHTER MK.6

Art.Nr.: 300061053 Artikelbezeichnung: 1:48 BRISTOL BEAUFIGHTER MK.6 About the Bristol Beaufighter Mk.VI Bristrol's "Beaufighter" was one of the most successful and widely used twin engines fighter types during WW2. The first series production Beaufighter MK.1 entered service in September 1940. With its four nose-mounted 20mm cannons and six 7.7mm machine guns in the wings, this stub-nosed fighter became the most heavily armed aircraft in service with the RAF during the war. As the German Luftwaffe eventually turned to night bombing in autumn of 1940, priority was put on night fighters and the first operational Beaufighters were fitted with the Airborne Interception (AI) radar, which designated the Mk.1F (F was suffix for Fighter Command). Meanwhile, its rugged construction was thought ideal for long range fighting and escort duties, and the Mk.1C under the Coastal Command became ready for initial operations in late March 1941. Introduction of the more powerful, 1,670hp Hercules VI engines by late 1941 resulted in the Mk.VI. A 7.7mm machine gun being added in the observers canopy for rearward defense, and the horizontal tail plane was modified to have a 12 degree of dihedral, to eliminate the unstable characteristics observed on the preceding types. The Beaufighters saw active service not only above Europe but also in the Mediterranean, North Africa, Middle East and Pacific area. More than 5,900 Beaufighters of various types were produced.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
33,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 Brit. 7ton AC Mk. IV Panzerwagen

Art.Nr.: 300032587 Art.bezeichnung: 1:48 Brit. 7ton AC Mk. IV Panzerwagen
19,49 €
inkl. Mwst. zuzüglich Versandkosten

1:48 Brit. Supermarine Spitfire Mk.I

Art.Nr.: 300061119 Formneuheit von TAMIYA! Die Supermarine Spitfire ist eines der berühmtesten Flugzeuge der Royal Air Force im Krieg um England. Die Mk.I hat eine besondere Stromlinienform mit elliptischen Flügeln für mehr Geschwindigkeit. Angetrieben wurde die Spitfire von einem Merlin Motor.
38,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 Brit.Pz. Churchill Mk.VII Crocodile

Art.Nr.: 300032594 Artikelbezeichnung: 1:48 Brit.Pz. Churchill Mk.VII Crocodile This is a 1/48 scale plastic assembly kit model of the British Tank Churchill Mk.VII Crocodile. The Churchill design was the result of a chastening experience for British forces in early WWII, a more modern design that could be produced quickly to make up for armor shortfalls after the Dunkirk evacuations. The Mk.VII variant was up-gunned with a 75mm gun and had improved armor up to 152mm thick! The Crocodile is one of the most notable "special" variants of the Churchill. It had an 80-plus meter range flamethrower in place of the front machine gun, towing its fuel and compressed nitrogen propellant in a trailer behind.
30,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 Deut. Horch Typ 1a 4x4 Geländewagen

Art.Nr.: 300032586 Art.bezeichnung: 1:48 Deut. Horch Typ 1a 4x4 Geländewagen The Horch 1a was developed in accordance with the pre-WWII "Einheits Program," which aimed at streamlining vehicle production. The soft-top vehicle could carry 8 crew members, and had a V8 engine providing 80hp. It possessed a range of 400km, and was given an oversized radiator to help it battle on in tough environments such as North Africa. Another notable feature was the 120-liter fuel tank, split in two around the prop shaft. Around 2,900 were produced between 1937 and 1940; the Type 1a was used heavily in the early stages of WWII.
24,49 €
inkl. Mwst. zuzüglich Versandkosten

1:48 Douglas A-1J Skyrider USAF

Art.Nr.: 300061073 Artikelbezeichnung: 1:48 Douglas A-1J Skyrider USAF About the Douglas A-1J Skyraider U.S. Air Force Also going by the names Dauntless II, AD, A-1 Able Dog, and Spad, the Douglas Skyraider saw almost 30 years of service. The Skyraider's development started in June 1944. Not completed in time for WWII, its first combat came with the outbreak of the Korean War in June 1950. The first production version to roll out of the Douglas factory was designated the AD-1. Twelve years and seven versions later, over 3200 Skyraiders had been produced. Among those, the AD-6 version, also known as "Able Dog Six", was produced in the greatest numbers. The next and final version of the Skyraider, the AD-7, was extremely identical to the AD-6, but it had reinforced wing spars and wing fittings, as well as the strongest landing gear of all the variants. The AD-7 housed the new wright R-3350-26WB engine, which enabled a top speed of 285 knots. Due to a directive to standardize the designation of Navy and Air Force aircraft, AD-6 and AD-7 became known as A-1H and A-1J respectively. In 1965, when U.S. air operations in Vietnam became more aggressive, literally hundreds of Skyraiders, including the A-1J, were deployed to the 14th and 56th Special Operations Wings (SOW). Armed with Mk.82 and Mk.117 bombs, 20mm wing-mounted cannons, and rocket launchers, the Skyraiders were used in a wide variety of combat missions.
40,49 €
inkl. Mwst. zuzüglich Versandkosten

1:48 Dt. Bf109 G-6 Messerschmitt

Art.Nr.: 300061117 Artikelbezeichnung: 1:48 Dt. Bf109 G-6 Messerschmitt This precision model aircraft assembly kit depicts the Messerschmitt Bf 109 G-6 variant. It compliments Tamiya’s other variants such as the E-3 and E-4/7 Trop. The Bf 109 is a legendary name in aviation, an aircraft which combined longevity and versatility in the hands of the Luftwaffe and other air forces. The G-6 was the most prolifically produced Bf 109, accounting for more than a third of the total. Introduced in early 1943, it could be fitted with underwing 20mm cannons in pods, or synchronized 13mm machine guns in distinctive bulges ahead of the cockpit, and was powered by the Daimler-Benz DB605A liquid-cooled V12, which gave a top airspeed of 640km/h.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
44,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 Dt. Fig.-Set Luftw.(5)Wint.m. Kkrad

Art.Nr.: 300032412 Artikelbezeichnung: 1:48 Dt. Fig.-Set Luftw.(5)Wint.m. Kkrad This product takes a modern figure set from ICM and powers it up by adding Tamiya accessories and instructions, in a new Tamiya package! It recreates crew from the Luftwaffe, the famed WWII German air arm which of course included not only pilots but also a whole range of recruits in supporting roles. • This is a 1/48 scale plastic model assembly kit. • Comes with parts for 5 figures: 2 pilots, 2 mechanics (one carrying a bomb, one spray-painting) and a sentry. • Realistic poses give the figures a highly authentic air. Winter gear such as the fur collared pilot’s jackets, heavy sentry’s coat, and winter boots are depicted with aplomb. • Also features a number of accessories such as tools and a sentry post. • Includes Tamiya parts to recreate the Kettenkraftrad and accessories such as oil drums, jerry cans, folded sheets, buckets and more. • Why not pair with Tamiya WWII aircraft models in 1/48 for a detailed and vivid diorama? • Figure parts are a product of ICM.  
23,49 €
inkl. Mwst. zuzüglich Versandkosten

1:48 Dt. Focke Wulf Fw190 A-3

Art.Nr.: 300061037 Artikelbezeichnung: 1:48 Dt. Focke Wulf Fw190 A-3 In der Fw190 A-3 wurde der BMW 801 Dg Motor verwendet, der 1.700 PS erzeugte. Die Waffenausrüstung bestand aus sechs Geschützen, bestehend aus zwei Schnellfeuerwaffen MG151 in den Flügeln, zwei MG FF, die außen am Fahrwerk angebracht waren, und zwei MG17 Maschinengewehr, die am Rumpf befestigt waren.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
27,49 €
inkl. Mwst. zuzüglich Versandkosten

1:48 Dt. Messerschmitt Bf109 E3

Art.Nr.: 300061050 Artikelbezeichnung: 1:48 Dt. Messerschmitt Bf109 E3 About the Messerschmitt Bf109 E-3 Without a doubt, the Messerschmitt Bf109 can be claimed as the most famous and successful German aircraft from the WW2. It was the world's most advanced fighter at the time of its debut in 1936, and remained as the standard fighter for the Luftwaffe throughout the conflict. Created by the brilliant designer Willi Messerschmitt, it had the smallest possible airframe built around the most powerful engine available. It also boasted many of the then innovative features such as an all metal stressed skin construction, retractable main landing gear, automatic Handley-Page leading edge slats, etc. The Bf109 saw first combat during the Spanish Civil War and fully demonstrated its exceptional maneuverability, inherited from its precedent Bf108 Taifun (Typhoon) multi-purpose sports plane. The Bf109 underwent numerous improvement throughout its career, and mass production of the E variant started late in 1939. Within one year, about 2,000 "E" aircraft were rolled out. Its excellent performance greatly contributed in the active service of German pilots at the Western Front and during the "Battle of Britain". The E-3 version used an improved Daimler-Benz DB601Aa engine capable of 1,100 h.p. output. This engine had provision for mounting a 20mm MG FF cannon on the crankcase and firing through the propeller hub. The Messerschmitt Bf109E was one of the best fighters of the early WW2 period, on a par with the British Spitfire.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
27,49 €
inkl. Mwst. zuzüglich Versandkosten

1:48 Dt. Messerschmitt Me262 A-1A

Art.Nr.: 300061087 Artikelbezeichnung: 1:48 Dt. Messerschmitt Me262 A-1A About the Messerschmitt Me262 A-1a The revolutionary Messerschmitt Me262 was the first jet powered plane to see service. The construction of pre-production aircraft designated Me262 A-0 started in April 1944 but the fighter production version that should have been the first version to be mass-produced was delayed because of Hitler's strict contrary orders prioritizing the deployment of fighter/bomber A-2a version. Then, in November 1944, the Me262 A-1a fighter version was finally put into production. It was equipped with four 30mm cannons in the nose to counter Allied bombers and escorting fighters. Late production planes were equipped with hooks under the nose to mount rocket launchers and with 24 R4M air-to-air rocket under the wings making the Me262 the most feared German fighter by Allied pilots. About the model - Tamiya presents the plastic assembly kit of the Messerschmitt Me262 that was used by the Luftwaffe during the closing days of WWII. - 1/48 Scale, Overall Length: 221mm, Overall Width: 264mm. The unique form of the Me262 with its engine nacelles under each wing has been accurately replicated. - The 4 X 30mm cannon mounted in the nose and cockpit have been reproduced down to the finest details. Canopy and gun bay access panels can be mounted in either open or closed position. - R4M air-to-air rockets with launchers to be mounted under the wings and W.Gr 21 air-to-air rocket-launchers to be assembled under the nose are part of the kit. - Nose wheel well comes as a die-cast weight. - A pilot figure and decals for 4 different markings are included in the kit.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
42,49 €
inkl. Mwst. zuzüglich Versandkosten

1:48 Dt. Nachtjäg.Heinkel Uhu He219

Art.Nr.: 300061057 Artikelbezeichnung: 1:48 Dt. Nachtjäg.Heinkel Uhu He219 Die He 219 A-7 UHU angetriben von zwei Daimler-Benz DB603 Motoren zeigte dieses Flugzeug mit dem langen, schlanken Rumpf in der Schlußphase des Kriegs seine Kampfqualitäten bei Nachtoperationen gegen Alliierte Bomber.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
51,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 Dt. PzKpfw. IV Ausf.H (Späte Prod.)

Art.Nr.: 300032584 Artikelbezeichnung: 1:48 Dt. PzKpfw. IV Ausf.H (Späte Prod.) The Panzer IV was one of the most feared weapons in WWII, and would serve German forces throughout the conflict in the guise of a number of variants. The Ausf.H variant itself featured early, middle and late production types, all of which were armed with a L/48 75mm gun and featured "Schürzen" armor side skirts for greater protection. Late production Panzer IVs were identifiable by their tracks: they lacked a center guide. Upper road wheels had their rubber tires removed and were made into steel wheels, while the tank received cast metal idler wheels. 3,774 Ausf.H Panzer IVs were produced between April 1943 and July 1944, and it was eventually succeeded by the Ausf.J. The Tamiya model in 1/48 scale captures every detail and nuance of the real life subject thanks to extensive research of the full size vehicle.
27,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 Dt. Sturmtiger 38cm

Art.Nr.: 300032591 Artikelbezeichnung: 1:48 Dt. Sturmtiger 38cm The Tamiya 1/35 Military Miniatures Sturmtiger is a classic kit that has been around for decades. The 1/48 scale version has received all new tooling and further extends the long line-up of kits offered in this smaller scale! The Sturmtiger was a seldom-seen variant of the Tiger I, using existing chassis and suspension to mount a mammoth 38cm caliber mortar for use against buildings and other fortifications in urban warfare. Only an estimated 18 were ever produced, between August and December 1944, and they were somewhat unwieldy in that they weighed around 65 tons. Nonetheless, they would still have proved a frightening foe to those who encountered them in the Battle of the Bulge, the Warsaw Uprising and the invasion of the German homeland.
29,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 DT. Tiger I Late Prod.(Tentative)

Art.Nr.: 300032575 Artikelbezeichnung: 1:48 DT. Tiger I Late Prod.(Tentative) Der deutsche Tiger I mit seiner durchschlagsstarken 88 mm Kanone sowie der hervorragenden Panzerung war im 2. Weltkrieg der stärkste Widersacher der alliierten Truppen. TAMIYA präsentiert den im Maßstab 1:35 bekannten Tiger I nun als 1:48er Bausatz und erweitert die 48er Serie um diesen legendären Panzer TAMIYA-Bausätze können nach eigenen Vorstellungen lackiert werden. Zur Fertigstellung werden separat erhältliche Farben, Klebstoff und Kleinwerkzeug benötigt.
31,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 Dt. V-1 Fiseler Fi103

Art.Nr.: 300061052 Artikelbezeichnung: 1:48 Dt. V-1 Fiseler Fi103 Auf Flugzeugen im Maßstab 1:48 kann man alle Details erkennen. Die Flugzeuge sind für Anfänger groß genug, um mit Leichtigkeit damit fertig zu werden, aber auch der Könner kann das Beste herausholen. Diese Serie umfasst Flugzeuge aus aller Welt. Bauanleitungen sind sehr deutlich und die Decals äußerst genau. Die Serie umfasst Trägerflugzeuge, Jäger und Kampfflugzeuge.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
13,59 €
inkl. Mwst. zuzüglich Versandkosten

1:48 Dt. Zugmaschine SS-100

Art.Nr.: 300032593 Artikelbezeichnung: 1:48 Dt. Zugmaschine SS-100 This scale model recreates the SS-100, which was a veritable workhorse for German forces during WWII. Powered by a 100hp 8,553cc diesel, it was based upon a civilian vehicle design and could pull loads of up to 20 tons. The SS-100 was put to work towing all sorts of subjects including artillery pieces, aircraft, and even V2 rockets, as well as recovering broken down vehicles.
23,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 Dt.Focke Wulf Fw190 D-9

Art.Nr.: 300061041 Art.bezeichnung: 1:48 Dt.Focke Wulf Fw190 D-9 About the Focke-Wulf Fw190 D-9 Following the successful entry of the Focke-Wulf Fw190A series of fighter aircraft over the English channel during the autumn of 1941, the German RLM requested high altitude version to complement the fighter fleet, and three projects were started. The Fw 190B used the B.M.W. 801 turbosupercharged radial engine and a pressurized cockpit, but very few of these were built. The Fw190C was powered by a 1,750hp Daimler Benz DB603A in-line engine, of which three prototypes were built. The third high altitude project was based on the Focke Wulf Fw190A airframe and powered by a Junkers engine. The fuselage was lengthened to accommodate the V-12 cylinder, liquid cooled, 1,750hp Jumo 213 engine, and made its initial flight during the winter of 1941 - 42. Five further prototypes were produced, plus small batch of Fw 190 D-Os were completed from standard production Fw 190A-7 airframes. These pre-production aircraft were followed by the Fw190 D-2 through D-8 designations. The Fw 190D-9 began production in June 1944, with early versions having the flat topped canopy, and from W. Nr. 210002 onwards having the Galland hood (blown canopy). It went into combat with the III/JG 54 "Grunherz" (Green Hearts) in September 1944, at Achmer, Germany, as top cover for the new Messerschmitt Me262 Jet fighters then entering service.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
27,49 €
inkl. Mwst. zuzüglich Versandkosten

1:48 Fairchild Republic A-10A Thunder.II

Art.Nr.: 300061028 Artikelbezeichnung: 1:48 Fairchild Republic A-10A Thunder.II About the Fairchild Republic A-10A "Thunderbolt II" The need for close air support, on small pin point targets, was recognized early during the Vietnam conflict. Following an experimental development program begun in the early 1970's, the Fairchild Republic Industries A-10 Thunderbolt II was selected for production. The performance characteristics demanded were for operation on unimproved short fields, both high and low airspeed maneuverability, easy maintenance, long loiter times and range, excellent pilot protection, and a capacity for large mixed weapons loads. The appearance of the A-10 is remarkable while its performance is amazing. Known affectionately as the "Wart Hog" by its pilots, it's a large single seat aircraft, identified by a pair of TF-34-100A high bypass fan jet engines mounted high near the rear of the twin tailed fuselage. A few of the specifications are: Length 53' 4"; height 14'8", span 57'6"; maximum gross weight 47,400lbs, including 16,000lbs of external stores. Internal armament is the GAU-8/A 30mm Gatling cannon capable of 2100 or 4200 rounds per minute. It carries 1350 rounds of ammunition, a fire control head-up display, CRT TV monitor, laser spot seeker plus a diversified armament panel that can facilitate any operational need. The A-10 has been around since 1972, and has again proven its worth during the recent Gulf war.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
35,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 Grumman F-14D Tomcat

Art.Nr.: 300061118 Artikelbezeichnung: 1:48 Grumman F-14D Tomcat • This is a 1/48 scale plastic model assembly kit. Fuselage length: 398mm, wingspan: 408mm (with variable sweep wing in fully forward position). • Tamiya designers spent many hours close up with real aircraft to obtain a highly accurate end product. • Captures F-14D-specific features such as the engine afterburner nozzles, vertical stabilizers and even minute panel lines. • A detailed cockpit includes depictions of updated instrument panels and ejection seats. • Model parts depict late variants of Phoenix, Sparrow and Sidewinder air-to-air missiles. Also included are parts for drop tank, laser- and GPS-guided bombs, LANTIRN targeting pod, TARPS reconnaissance pod and jamming pod – a comprehensive line-up. • Features moving depiction of variable sweep wing. 2 sets of parts - interchangeable after completion - depict sealing plates and air bags with wing in fully swept and fully forward positions. • Slide molding was used to ensure highly realistic canopy, air intake side and fuselage side sections. • Poly caps allow movement of horizontal stabilizers. • Comes with realistic figures depicting pilot and RIO (Radar Intercept Officer) in seated pose. • Includes high-quality decals to realize 4 (planned) marking options, plus a handy set of masking stickers for use when painting the canopy.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
99,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 Jagdpanzer Elefant

Art.Nr.: 300032589 Artikelbezeichnung: 1:48 Jagdpanzer Elefant This is a 1/48 scale assembly model of the German Heavy Tank Destroyer Elephant. The newly tooled 1/48 Elefant has extensive detail, even at this smaller scale, thanks to the extensive research conducted by Tamiya's designers to make the 1/35 scale rendition. The development of the full-size Elefant is an interesting case study in weapons development. Its chassis was developed by Porsche in the design competition for the Tiger I, but while Porsche was sure enough of its success to ready 100 examples of the chassis before the end of the competition, the design was not chosen. The "left over" chassis were turned into the Elefant on the orders of Hitler in 1942 - some 90 examples were built by May 1943. With armor plates, up to 200mm thick and a powerful long-caliber 8.8cm gun, it was a formidable piece of equipment, and served German troops until the end of WWII.
30,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 Jap. Ki-61-Id Hien (Tony) Flzg.

Art.Nr.: 300061115 Artikelbezeichnung: 1:48 Jap. Ki-61-Id Hien (Tony) Flugzeug The Kawasaki Ki-61 Hien was a WWII Japanese fighter powered by the Ha-40 engine - a license-produced version of a Daimler-Benz power plant. On account of its liquid cooled engine (it was the only Japanese fighter in the Pacific fighting to have one), the Hien was apparently mistaken for a German aircraft and then for an Italian bird, and was given the reporting nickname "Tony." It saw combat action from early 1943 and proved a competitive aircraft with its top speed of 580km/h, used in the desperate Japanese defense of the Solomon Islands and even as an interceptor when U.S. B-29s got in range to bomb the Japanese home islands toward the end of WWII.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
45,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 Jap. Mitsu. J2M3 Interceptor Raiden

Art.Nr.: 300061018 Artikelbezeichnung: 1:48 Jap. Mitsu. J2M3 Interceptor Raiden The J2M Raiden (Allied reporting name "Jack") was developed by the Japanese Navy in WWII as a land-based interceptor. It began to reach units from September 1944 and they were used to intercept B-29 bombers which were attacking Japan. This kit accurately depicts the J2M3 variant and allows modellers to assemble either deployed or retracted landing gear. Parts for a drop tank and two pilot figures, as well as three marking options, including a 302nd Kokutai aircraft, are included.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
15,89 €
inkl. Mwst. zuzüglich Versandkosten

1:48 JGSDF MCV Type 16 (8x8) (1)

Art.Nr.: 300032596 Art.bezeichnung: 1:48 JGSDF MCV Type 16 (8x8) (1) This scale model assembly kit recreates the Japan Ground Self Defense Force (JGSDF) Type 16, which reached units beginning in 2017. An 8-wheel vehicle, the JGSDF classify it as a Maneuver Combat Vehicle (MCV), a highly mobile and well-armed vehicle intended to provide supporting fire and take on enemy armor as a part of rapid response units. Its domestically designed L/52 105mm rifled gun is a low-recoil piece with perforated muzzle brake and a fire control system to enable accurate firing on the move. Rolled steel turret and hull employ modular and spaced armor estimated to be able to survive frontal hits from 20-30mm class guns and portable anti-tank weapons. Thanks to its 570hp engine, the 26-ton Type 16 has a top speed of around 100km/h and significant range; it looks set to provide a major boost to JGSDF units as its rollout continues. • 1/48 scale plastic model assembly kit. Length: 176mm, width: 63mm. Model has a dedicated parts breakdown for a hassle-free build without sacrificing accuracy. • An accurate rendering is based upon extensive research of the actual Type 16, authentically capturing the modern silhouette with a moving depiction of the 105mm gun. • Features crisp molding on details such as non-slip surfaces, plus multi-piece machine gun and mount. • The 8-wheel suspension is depicted in style, with fixed wheels. Elastomer tires have a realistic tread pattern. • Decals are included to recreate periscope openings and muzzle brake perforations. • Comes with one commander figure and two marking options.
28,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 Lockheed Mar.F-16CJ Fighting Falcon

Art.Nr.: 300061098 Artikelbezeichnung: 1:48 Lockheed Mar.F-16CJ Fighting Falcon About the F-16CJ The F-16 is one of the world's top lightweight multi-role fighter aircraft. Since first deployment to U.S. Air Force (USAF) units in the late 1970's, total production numbers have exceeded 4,000, making it the second most highly produced jet fighter plane following the F-4 Phantom. The latest F-16 variant deployed to USAF units, the F-16C Block 50, is capable of precision night and all-weather bombing, and features advanced digital electronics for radar and cockpit displays. The slight variant, the F-16CJ (Block 50), is fitted with HARM Targeting System (HTS) and is used specifically for SEAD (Suppression of Enemy Air Defenses) missions. The F-16CJ (Block 50) has flown SEAD missions over Iraq while monitoring the northern and southern no-fly zones and during Operation Iraqi Freedom. About the Model - Model represents the F-16CJ (Block 50) as used for USAF SEAD missions. - Sleek fuselage including aerodynamic blended wing body design accurately reproduced. - Accurately curved bubble top canopy can be assembled in the opened or closed position. - Horizontal stabilizers are movable and flaperons can be modeled in both the up or down positions. - A range of weapons and accessories are included such as HARM, AMRAAM, and Sidewinder missiles (M & X variants), detachable external fuel tanks, ECM pod, and HTS pod. - One pilot figure included and can be depicted with either standard or JHMCS flight helmet. - Detailed markings for 3 aircraft, including the 5th Air Force commander's aircraft stationed at Misawa airbase in 2005, are included.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
59,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 Lockheed Martin F-16C Block 25/32

Art.Nr.: 300061101 Artikelbezeichnung: 1:48 Lockheed Martin F-16C Block 25/32 About the F-16C Block 25/32 The F-16 has become one of the most widely-used jet fighters in the world, and has therefore undergone a series of upgrades throughout its service life with various air forces. The Block 25entered service in 1984 and featured upgraded radar and cockpit avionics. The Block 32 was the first upgrade affected by a program to use different engines in the F-16, and continued to use Pratt & Whitney engines, while the Block 30 used engines made by General Electric. The Block 32 has been upgraded to carry a wide range of weapons, including the LITENING II laser targeting pod, which enables precision attack capability with laser-guided bombs. About the Model - Model represents the F-16C [Block 25/32]. New parts accurately reproduce the correct engine nozzle and smaller air intake that correspond to Pratt & Whitney powered F-16s. - Main landing gear and gear well covers also depicted with new parts. - Wing reinforcement plates for Block 32 recreated with phot etch parts (sold seperatley). - Extensive weapons set features AIM-9L/M and AIM-9X sidewinders, AIM-120 AMRAAM, wing and centerline fuel tanks, and LITENING II targeting pod. - New parts for GBU-12 laser-guided bombs feature clear parts to depict the laser guidance package for a more realistic finish. - New ordinance racks on the wings accurately match their respective weapons. - 1 pilot figure included and 3 sets of U.S. Air National Guard markings included. - Add ITEM 12621 F-16 Fighting Falcon Detail Up Parts Set for the ultimate finish.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
69,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 Matilda Mk.III/IV British Infantry

Art.Nr.: 300032572 Artikelbezeichnung: 1:48 Matilda Mk.III/IV British Infantry This is a 1/48 scale plastic assembly model of the British Matilda previously available in 1/35 scale. Historical background: The Matilda was developed as a heavily armored infantry tank and was one of the British Army's main tanks in North Africa during WWII. The Matilda swept aside opposing Italian tanks and was respectfully called the "Queen of the Desert" by German forces. During Operation Battle axe to lift the siege of Tobruk in June 1941, German forces famously used their 88mm AA guns in the anti-tank role as they were the only effective counter against Matildas.
32,99 €
inkl. Mwst. zuzüglich Versandkosten
Versandinformation

Wenn Sie diesen Artikel in den Warenkorb legen, ist die Lieferadresse Ihrer Bestellung auf folgende Länder beschränkt:

nach oben