Diese Website verwendet Cookies. Durch die Nutzung der Website stimmen Sie der Verwendung von Cookies zu.
OK
Tamiya CarsonMajoretteDickie ToysSchuco 

1:48 WWII Diorama-Set Feld-Instandsetz.

Art.Nr.: 300032547 Artikelbezeichnung: 1:48 WWII Diorama-Set Feld-Instandsetz. Tamiya provides more 1/48 scale diorama options for military modellers everywhere with the release of this extensive figure and accessory set. Match them with any of our large lineup of 1/ 48 MM German vehicles to add more life to your display. About the Model High quality 1/48 scale German army figure and accessory set. Set includes 9 figures doing various tasks in realistic standing and kneeling poses. Ammunition loading - 4 figures Tire repair - 1 figure Engine maintenance - 2 figures Painting - 1 figure Supervisor - 1 figure Large selection of accurately reproduced accessories and tools included. 88mm ammunition for King Tiger (x2) Wooden case for 88mm ammunition for King Tiger (x2) 88mm ammunition for Tiger I (x4) Wooden case for 88mm ammunition for Tiger I (x2) 75mm ammunition for Panther (x2) Wooden case for 75mm ammunition for Panther (x2) 75mm ammunition for Pz.kpfw.IV (x4) Wooden case for 75mm ammunition for Pz.kpfw.IV (x2) Oil drum (x2) 1 each of the following accessories: Tool Kit, Ladder, Burner, Tool Bag, Wooden Crate, Hammer, Bucket, Jack Crank, Jack, Anvil, Vise, Open Tool Box, Closed Tool Box, Oil Siphon, 18 Liter Can
17,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 WWII Diorama-Set Mauern&Sandsäcke

Art.Nr.: 300032508 Artikelbezeichnung: 1:48 WWII Diorama-Set Mauern&Sandsäcke Ziegelmauer, Sandsack und Barrikade Bausatz.
13,79 €
inkl. Mwst. zuzüglich Versandkosten

1:48 WWII Dt. 20mm Flakvierling 38 (4)

Art.Nr.: 300032554 Artikelbezeichnung: 1:48 WWII Dt. 20mm Flakvierling 38 (4) About the Flakvierling 38 Originally developed as a light anti-aircraft weapon for the Kriegs marine, the German army also adopted the 20mm cannon for use on land and was widely-used throughout WWII. To compensate for the cannons low rate of fire, 4 of these cannons were mounted together to create the Flakvierling 38. The mount featured collapsible seats, ammo cartridge racks, a three-legged base, and could be rotated via hand wheels, with the guns themselves fired via two foot pedals,each of which controlled a pair of diametrically opposed cannons. In basic form, the Flakvierling38 was loaded onto a 2-wheeled mount for towing to deployment points, but it was also fitted onto halftracks, tank chassis, ships, barges, and trains to provide close-range air defense against Allied fighter-bombers. About the Model High-quality 1/48 scale assembly model kit of the German Flakvierling 38 anti-aircraft gun. Quad-20mm cannons are linked to gunsight. Guns can be freely elevated/depressed and gun pedestal can be rotated to enable various firing positions. Parts are included for the trailer, enabling the gun to be towed by 1/48 scale vehicles such as ITEM 32534 6X4 Krupp Protze (Kfz.70). 4 figures in realistic poses as well as detailed accessories such as ammunition boxes and magazines are included as well. Excellent as a stand-alone diorama piece or as a component in larger displays
19,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 WWII Dt. F.W. Fw190 F-8/9 m.Belad.

Art.Nr.: 300061104 Art.bezeichnung: 1:48 WWII Dt. F.W. Fw190 F-8/9 m.Belad. In the latter half of WWII, the Luftwaffe Focke-Wulf Fw190 F series were the main aircraft used for air-to-ground assaults. The F-8, which entered the fray from the spring of 1944, was based on the A-8 aircraft and had the largest production numbers among the F series variants. The F-9 which had a superior engine output was also soon put into action. Both Fw190 F-8 and F-9 aircraft fought hard against the ever increasing numbers of Allied fighters up until the end of the war.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
39,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 WWII Dt. Jagdpanzer Marder III M

Art.Nr.: 300032568 Art.bezeichnung: 1:48 Dt. Jagdpanzer Marder III M The Marder III series tank was designed using the chassis of the obsolete 38(t) tank made by the Czech company CKD. This tank destroyer was developed to counter the Russian T-34 and KV-1 tanks. The initial version of the Marder was armed with the PaK 36(r) 7.62cm anti-tank gun. Addition versions of the Marder were created based on the 38(t) tank. The series culminated with the development of the Marder III M, which differed from the earlier models. The Marder III moved the engine to the center of the tank and the fighting compartment to the rear of the vehicle. This revision lowered the profile of the crew compartment allowing for additional armor plates for protection. Between May 1943 and May 1944, 942 Ausf. M tanks were produced. About the model Scale 1/48 Assembly kit Photo-etch parts Not included Decals included Special feature 1 The Marder's combat compartment has been recreated in superb detail. .
24,49 €
inkl. Mwst. zuzüglich Versandkosten

1:48 WWII Dt. Kettenkrad m.Goliath

Art.Nr.: 300032502 Artikelbezeichnung: 1:48 WWII Dt. Kettenkrad m.Goliath Kettenkraftrad: Ein einzigartiges Halbketten-Motorrad als leichte Zugmaschine mit Infanterie-Karren. Sein Motor ist ein 4-Zylinder 1.478cm³ Opel-Olympia Motor mit 36 PS. Goliath Zerstörungs-Fahrzeug: ein ferngesteuertes selbst-explodierendes Fahrzeug.
17,49 €
inkl. Mwst. zuzüglich Versandkosten

1:48 WWII Dt. Kübelw.Typ82 Pkw.K1 Afrika

Art.Nr.: 300032503 Art.bezeichnung: 1:48 Dt. Kübelw.Typ82 Pkw.K1 Afrika One of the most widely used WWII vehicles, the Kübelwagen Type 82 featured a lightweight monocoque body, four wheel independent torsion bar suspension and a 23.5hp air-cooled 4 cylinder 985cc engine. Based on Dr. Ferdinand Porsche's Volkswagen, the Type 82 possessed excellent maneuverability and handling, serving as a multi-purpose vehicle for the army as well as the Luftwaffe (air force). In total over 50,000 units were produced during WWII, with slight variations between models including shape of rear fender, under guard, turn signals and exhaust layout. The Kübelwagen was first deployed to the North Africa campaign in 1941, with a specialised Africa Corps version featuring balloon tires going into production from 1942. Designed to be more suited to desert conditions, the Africa Corps model was used during both the North Africa and Italian campaigns. Overall length: 79.5mm, overall width: 33.5mm Bonnet, short fender, balloon tires and other distinctive characteristics of the Africa-Corps Kübelwagen have all been authentically reproduced 1 driver and 1 pilot figure wearing shorts and rolled sleeve shirt included Decals for 5 different markings Perfect for diorama with German aircraft from the 1/48 Aircraft Series such as the Messerschmitt Bf109E-4/7 Trop
12,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 WWII Dt. Kübelwagen Typ 82 Pkw.K1

Art.Nr.: 300032501 Artikelbezeichnung: 1:48 WWII Dt. Kübelwagen Typ 82 Pkw.K1 Im November 1938 der Prototyp des Kübelwagens vorgestellt. Er verfügte über eine leicte, aber verwindungssteife Schalenkonstruktion mit einem Faltverdeck. Der hinten eingebaute, luftgekühlte 4-Zylinder Motor hatte einen Hubraum von 985cm³ und eine Leistung von 23,5 PS bei 3000 Umdrehungen, der das Auto auf 80km/h brachte.
17,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 WWII Dt. SdKfz.67 (6) mit 3,7cm PAK

Art.Nr.: 300032580 Artikelbezeichnung: 1:48 WWII Dt. SdKfz.67 (6) mit 3,7cm PAK In the lead-up to WWII, Germany started to transform civilian vehicles into military ones, and one of the subjects was a light 6-wheel truck which was mass-produced starting in 1933. This 1936 evolution of the truck had a 60hp flat four square cylinder engine that mustered 55hp and provided up to 70km/h. The truck was used for transporting personnel and light artillery, and it utilized 6x4 independent suspension with rear 4-wheel drive. The first mass-produced variant was the Kfz.69, which was designed to tow a 3.7cm Pak 35/36 anti-tank gun and carried a driver and 5-artillery crew. It was employed as standard equipment in anti-tank artillery divisions and was seen in action in locations such as France, Poland, the Balkans, and Russia. The Tamiya model faithfully captures all of the details of the full-size subject thanks to extensive research of surviving samples left over from the war. Scale: 1/35 Length: 182 mm
25,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 WWII Dt. Seitenwagengespann (2)

Art.Nr.: 300032578 Art.bezeichnung: 1:48 Dt. Seitenwagengespann (2) Add some more detail to your 1/48 scale dioramas with this scale model of a German motorcycle and side car. Side cars were paired with motorcycles by German forces in many areas of the WWII conflict, and their excellent off-road ability combined with the bike’s engine power made them a useful asset in transporting soldiers and equipment, some even being mounted with machine guns.
13,79 €
inkl. Mwst. zuzüglich Versandkosten

1:48 WWII Dt.Focke Wulf Fw190 A-8/A-8R2

Art.Nr.: 300061095 Artikelbezeichnung: 1:48 WWII Dt.Focke Wulf Fw190 A-8/A-8R2 Combating the Flying Fortresses   In 1944, as the U.S. began their long range strategic bombing campaign in earnest with heavily-armed B-17 and B-24 bombers, the Luftwaffe developed the specialized "bomber-killer" R2 variant of the Fw190 A-8. Tamiya now brings you this formidable fighter in the 1/48 scale, and with all the parts included in this kit you can choose to build either the R2 variant or the A-8. About the Fw190 A-8/R2   The Focke-Wulf Fw190 was one of the Luftwaffe's best front-line fighters of WWII. Of all the different variants, the A-8 armed with four 20mm cannon and two 13mm machine guns was the most widely produced. A sub-variant of the A-8 was the R2, which had two of the 20mm cannons replaced by more powerful 30mm guns and added armor protection for its role in attacking the giant 4-engined Allied bombers.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
35,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 WWII Dt.Lkw Krupp Protze m.Fig.(8)

Article number: 300032534 Product: 1:48 WWII Ger.Truck Krupp Protze w/8Fig. One of the fan-favorites in 1/35 scale, the German Krupp Protze 6-wheeled truck finally joins the 1/48 scale MM Series. Every characteristic of this truck, such as its low-profile bonnet, infantry carrier on rear and double wishbone suspension, has been realistically reproduced. Set also includes driver and infantry passenger figures to heighten realism and atmosphere. The 1/48 MM Series offers not just tanks, but also a rich variety of auxiliary and support vehicles for endless diorama possibilities. This vehicle was popularly known as the "Boxer" because it had an air-cooled flat-four square engine. This in turn allowed a flat sloping engine cover of quite unmistakable shape which also gave excellent forward visibility and a low silhouette. The Krupp "Boxer" was quite ubiquitous in application and the chassis carried body work for a considerable number of different roles. Aside from its air-cooled engine, the "Boxer" also had an independent suspension system, differing from the conventional springing systems of other six-wheelers in German service. 1/48 assembly model kit of the German 6x4 Truck Krupp Protze (Kfz.70). Overall length 107.5mm. Die-cast under panel adds weight and realism. Separately molded suspension spring for extra realism. Includes accessories such as Jerry cans, rifles and jack. Comes with 8 figures, including driver and passengers.
24,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 WWII Dt.Schw.Pz.Jagdtiger Früh.Pr.

Art.Nr.: 30003269 Art.bezeichnung: 1:48 Dt. Schw.Pz. Jagdtiger Frühe Prod. 1943 saw the production of the worlds heaviest and most powerful tank of its time, the Jagdtiger. Pro-duced by Henschel, it was based on the King Tiger's chassis and featured a long barreled 12.8cm gun which showed great offensive capabilities being able to knock out Allied tanks from a great distances. Along with its new design, the large sized fixed fighting compartment was given a 250mm thick front defensive armament which was unique to this tank. First appearing at the Ardennes offensive in December 1944, the Jagdtiger mostly fought against Allied forces in Western Germany from January 1945. Up until April 1945, more than 80 Jagdtigers and another ten with "Porsche turrets" were produced.
33,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 WWII Dt.Schwimmwagen Typ166 Pkw.K2

Art.Nr.: 300032506 Artikelbezeichnung: 1:48 WWII Dt.Schwimmwagen Typ166 Pkw.K2 Der Typ 166 besaß ein wasserdichtes Chassis und einen im Heck eingebauten, luftgekühlten 4-Zylinder Motor von 1.130 cm³ und 25 PS, womit er in der Lage war auf dem Lande eine Spitzengeschwindigkeit von 80km/h zu erreichen. Im Wasser wurde das Fahrzeug von einer Schiffsschraube bewegt und konnte Geschwindigkeiten bis 10km/h erreichen.
17,29 €
inkl. Mwst. zuzüglich Versandkosten

1:48 WWII Figuren-Set Dt.Infa.Manöv.(15)

Art.Nr.: 300032530 Art.bezeichnung: 1:48 Figuren-Set Dt. Infa. Manöver (15) Our latest 1/48 scale figure set features WWII German soldiers in relaxed poses, standing, walking, wearing field caps and with weapons shouldered. Also includes figures depicting tank crew at rest. 2 all-new officer figures and military policeman, which are available now for the first time in any scale, are also included. This set is perfect for modeling non-combat scenes and dioramas of life behind-the-lines. Set includes 7 machine gun crew on maneuvers, 2 standing infantry, 3 tank crew, 2 officers and 1 military policeman for a total of 15 figures. Infantry figures feature realistic M43 field uniforms. Includes separately molded weapons and equipment such as machine gun tripod mount.
11,79 €
inkl. Mwst. zuzüglich Versandkosten

1:48 WWII Figuren-Set Dt.Pz.Grenadi.(15)

Art.Nr.: 300032514 Artikelbezeichnung: 1:48 WWII Figuren-Set Dt.Pz.Grenadi.(15) Fünfzehn Deutsche Panzer Grenadiner mit Gewehren und Zubehör.
15,89 €
inkl. Mwst. zuzüglich Versandkosten

1:48 WWII IJN Komatsu G40 Schubraupe(1)

Art.Nr.: 300032565 Art.bezeichnung: 1:48 WWII IJN Komatsu G40 Schubraupe(1) During WWII, Japanese forces developed the Komatsu G40 Bulldozer to aid in airfield construction. This was the first bulldozer manufactured by the Japanese. One hundred and forty-eight G40 bulldozers were built throughout the war. The G40 was sent to the northern and southern fronts, but due to the war few managed to reach their assigned airfields. Only one G40 survived the war, and can be seen at the Komatsu Techo Center in Shizuka, Japan. The Japan Society of Mechanical Engineers recognized the vehicle in 2007 as a Mechanical Engineering Heritage item.
21,49 €
inkl. Mwst. zuzüglich Versandkosten

1:48 WWII PzKpfw. 38(t) Ausf. E/F

Art.Nr.: 300032583 Artikelbezeichnung: 1:48 WWII PzKpfw. 38(t) Ausf. E/F This is a model of the German light tank 38(t) in 1/48 scale. The 38(t) was designed and entered production for the Czechoslovak Army as the LT vz. 38, however before any could be delivered Germany occupied then divided the country. They rated the tank highly, ordering continued production of the initial lot of 150, renaming it the 38(t) with (t) denoting its Czech origin. It went on to serve as the front-line tank for the Wehrmacht in early WWII, from the initial operations in Poland up to and including Operation Barbarossa, the invasion of the Soviet Union in June 1941. It wielded a 37mm gun with 90 rounds on board, a coaxial 7.92mm MG37(t) machine gun, and another MG37 on the front left of the vehicle. 42km/h was squeezed out of the 6-cylinder engine. Ausf.E/F 38(t) variants featured doubled front armor thickness at 50mm, with 30mm on the hull and turret sides. 525 were produced in the period from November 1940 to October 1941.
20,49 €
inkl. Mwst. zuzüglich Versandkosten

1:48 WWII US Willys Jeep m.Fig.-Set (9)

Art.Nr.: 300032552 Artikelbezeichnung: 1:48 WWII US Willys Jeep m.Fig.-Set (9) Following the release of ITEM 32547 WWII German Tank Crew Field Maintenance Set, Tamiya is now planning another substantial figure and accessory set to add to our 1/48 MM lineup. This set will feature several U.S. infantry figures in life-like poses and an assortment of accessories that can be used to liven up any diorama.
29,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 WWII Volkswagen Typ82E Dienstwagen

Art.Nr.: 300032531 Artikelbezeichnung: 1:48 WWII Volkswagen Typ82E Dienstwagen Die markante, rund gehaltene Karosserie, für welche das Auto den Spitznamen "Käfer" erhielt, wurde von Porsche`s Chefingenieur Erwin Komenda 1938 entworfen. Der Volkswagen Typ 82Ewurde von vielen Offizieren des Deutschen Militärs und der Regierung als Stabsauto benutzt.
17,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 Zgm. SS-100 m. 88mm Flak37 Set

Art.Nr.: 300037027 Art.bezeichnung: 1:48 Zgm. SS-100 m. 88mm Flak37 Set The SS-100 was a heavy tractor used by German forces from the mid-1930s, originally a commercial design but also effective in military service throughout WWII thanks to an ability to haul up to 20 tons. Among a wealth of candidates, one of its passengers really stands out - the mighty 88mm gun, which was used against Allied forces with devastating effect. The Flak37 was a powerful 1937 variant, with sights updated from predecessors, and a large shield added from 1940. About the Model ★This is a 1/48 scale plastic model assembly kit set. SS-100 length: 114mm; 88m gun length (towed): 169mm. ★The sturdy SS-100 form is recreated with aplomb. ★Integrated cabin parts make for a fuss-free, accurate assembly. ★The complex Flak37 88mm gun is captured with realism. ★Transport wagon is also depicted. ★Comes with five figures and three marking options. *88mm gun parts are a product of Italeri.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
40,99 €
inkl. Mwst. zuzüglich Versandkosten

1:6 Honda CB750F 1979

Art.Nr.: 300016020 Artikelbezeichnung: 1:6 Honda CB750F 1979 This is a 1/6 scale plastic assembly kit model of the Honda CB750F, which quickly gained popularity after its release in 1979. ★The beautiful curved lines of the bike have been realistically reproduced. ★The air-cooled inline 4-cylinder 4-carburetor engine features detailed cooling fins and spark plug cables which are depicted with vinyl tubing. ★The metal front forks have a beautiful metal plated finish and coil springs that enable it to move. ★Exhausts also feature a smooth metal plated finish. ★In addition, side covers are removable to showcase the internal mechanisms even after assembly.
99,99 €
inkl. Mwst. zuzüglich Versandkosten

1:6 HONDA CRF 1000L Africa Twin Enduro

Art.Nr.: 300016042 Artikelbezeichnung: 1:6 HONDA CRF 1000L Africa Twin Enduro TAMIYA präsentiert die Honda CRF1000L Africa Twin. Ein modernes Adventurer-Touren-Motorrad, inspiriert vom legendären 4-maligen Paris-Dakar-Champion-Offroad-Bike. Die CRF1000L wurde im Jahr 2015 erstmals vorgestellt und verfügt über einen 998ccm Parallel-Twin-Motor mit 92 PS. Weitere Highlights sind beispielsweise ein Doppelkupplungsgetriebe, wählbare Drehmomentsteuerung für wenig griffigere Oberflächen und ABS-Bremsen. Ein super detaillierter Großmodell-Bausatz für anspruchsvolle Modellbau-Enthusiasten!   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
224,99 €
inkl. Mwst. zuzüglich Versandkosten

1:6 Honda Gorilla Spring Collection

Art.Nr.: 300016031 Artikelbezeichnung: 1:6 Honda Gorilla Spring Collection About the Honda Gorilla Spring Collection In 1967, Honda Pioneered the field of "leisure motorcycles" with the release of the Monkey. The uniqueness of the Monkey made it an instant hit among the young and young at heart. In August 1978, Honda released the big brother of the Monkey and appropriately named it "Gorilla". Save the gas tank and seat, the Gorilla adopted fundamentally the same parts as the Monkey. The most defining aspect of the Gorilla is its swelled chest, an oversized gas tank, which boasts a capacity of 9 liters providing a 630km maximum running distance. Its powerplant was a 49cc air-cooled single cylinder SOHC engine, which was also used on Honda's best selling Super Cub. The Gorilla was also equipped with a manual 4-speed transmission, opposed to the automatic 3-speed system of the Monkey. Production was ceased in 1992 but the popularity of the machine, however did not dwindle, with the few remaining used Gorillas fetching premium prices. It was in February 1998 when Honda resumed production, this time bringing out a new Gorilla equipped with the Monkey's large headlamp and using chrome parts on the headlight casing, fender and other places. January 1999 saw the production of 3500 "Honda Gorilla Spring Collection" machines. This version was meant to shine, and features chrome parts on virtually every visible part of the bike. The gas tank, the side-cover, the front forks, the chain case, the wheels, the exhaust pipe cover, even the frame and swing arm glisten with gorgeous chrome. About the Model ★1/6 scale plastic assembly kit. Overall length: 226mm, width: 104mm, height: 183mm, ★Every characteristic of the 1998 version of the Honda Gorilla such as the larger headlamp, front fork, tank cap and emblems applied on the tank have been accurately replicated. ★Chrome-plated areas of the actual machine have been reproduced with metal-plated parts. ★The 49cc SOHC air-cooled engine has been reproduced down to the f   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
61,99 €
inkl. Mwst. zuzüglich Versandkosten

1:6 Honda Monkey 2000 Anniversary

Art.Nr: 300016030 Artikelbezeichnung: 1/6 Honda Monkey 2000 Anniversary About the Honda Monkey 2000 Anniversary It was back in 1961 that a curious mini-motorcycle was seen putting around Honda's "Tama Tech" amusement park. One of the most popular rides in the park, it sported a red frame under a white gas tank, tiny 5 inch tires and a peppy 50cc engine. Riders were said to appear, of all things, simian, and henceforth the motorcycle came to be known as the Honda Monkey. Looking more like a toy than a motorcycle, the compactness and fresh appearance of the Monkey scored high with fans of all ages. Honda revamped the Z100 park version for use on public roads, and brought out the CZ100 model which began to be exported in 1963. The first model to be marketed in Japan was the improved Z50M Monkey, which featured folding handlebars and seat for easy stowing in a passenger car. In January 2000, Honda brought out the 2000 anniversary edition of the Monkey, which sported the image coloring of the 1971 Z50Z(2) model. The production of this special Monkey was limited to 3000 motorcycles. The continued appeal of the Monkey must be both its diminutive size and ease of customization. Each Monkey owner is free to interchange any number of components including the engine parts, carburetor, exhaust pipe and suspension. In fact, over 1500 custom parts are marketed for this playful mini-bike.
66,99 €
inkl. Mwst. zuzüglich Versandkosten

1:6 Motorradkette (Einzelglieder) Af.Tw.

Art.Nr.: 300012674 Artikelbezeichnung: 1:6 Motorradkette (Einzelglieder) Af.Tw. This assembly-type 1/6 scale chain is designed to go with the 1/6 scale Honda CRF1000L Africa Twin model kit. It promises to add an extra level of unbelievable detail to your masterpiece. •Includes individual assembly chain links consisting of individual plastic plates and metal spacers. •The completed chain will fit neatly onto the drive sprocket in Item 16042 Honda CRF1000L Africa Twin. •Includes a handy jig which aids construction. •Parts included in Item 16042 allow adjustment of the chain tension when it is fitted to the model. .
42,99 €
inkl. Mwst. zuzüglich Versandkosten

1:6 Suzuki GSX1100S Katana 1980

Art.Nr.: 300016025 Artikelbezeichnung: 1:6 Suzuki GSX1100S Katana 1980 One of the most famous motorcycle shows in the world, is held every two years in Cologne West Germany, and the 1980 show is sure to stand out as one of the most unforgettable. One reason was that Honda released their CX500 turbo for the first time, and the second is that Suzuki"s GSX1100S "Katana" (Japanese for sword) was unveiled. The Honda CX500 attracted attention for its advanced engine techniques and the Katana for its advanced and aggressive body styling, which broke from common traditional motorcycle styling. Although the Katana GSX1100S styling impressed the many thousands of viewers, almost everybody thought that it was just for show and the production model would be quite different. During the summer of 1981, Suzuki released the production Katana with almost exactly the same body styling seen at the Cologne show, with subtle improvements in the engine and running gear. The body styling is from the genius of Mr. Hans A. Muth of West Germany, who spent much time ensuring driver comfort in his design, and which proved out in many wind tunnel tests. The entire styling was derived from research on the best drivers position, and the rearward placed backsteps and unique tank styling were not done just for the pleasing jet age appearance. Large capacity fuel tank and small fairing were blended together for the best airflow around the rider and the bike. Although the bike is most noticable for its styling, every part in it is quality. Engine is an air-cooled, parallel 4 of 1075cc, using 16 valves. With the unique Suzuki TSCC (Twin Swirl Combustion Chamber) in the engine, it puts out 111 hp. This tremendous power transmits into a road speed of 230 k/h and its unique body styling deeps it stable even at these high speeds. Suzuki is shipping a 1000cc Katana GSX1000S tot he American market, and also a 750cc version to the European market as well. Requests from Japanese enthusiasts prompted Suzuki to also market a 750cc Katana GSX750S to their market
99,99 €
inkl. Mwst. zuzüglich Versandkosten

1:6/1:12/1:24 0,50mm Kabel/Schlauch 2m

Art.Nr.: 300012675 Artikelbezeichnung: 1:6/1:12/1:24 0,50mm Kabel/Schlauch 2m This cable features a wire core in vinyl casing. It’s great for reproducing the various piping and cables which appear on Tamiya's highly realistic scale car and motorcycle models. The wire core ensures greater flexibility and durability than standard hollow tubing in Tamiya model kits. • Length: 2 meters. • Please note that using these cables will require the making of holes in the subject model. .
3,99 €
inkl. Mwst. zuzüglich Versandkosten

1:6/1:12/1:24 0,65mm Kabel/Schlauch 2m

Art.Nr.: 300012676 Artikelbezeichnung: 1:6/1:12/1:24 0,65mm Kabel/Schlauch 2m This cable features a wire core in vinyl casing. It’s great for reproducing the various piping and cables which appear on Tamiya's highly realistic scale car and motorcycle models. The wire core ensures greater flexibility and durability than standard hollow tubing in Tamiya model kits. • Length: 2 meters. • Please note that using these cables will require the making of holes in the subject model. .
3,99 €
inkl. Mwst. zuzüglich Versandkosten

1:6/1:12/1:24 0,80mm Kabel/Schlauch 2m

Art.Nr.: 300012677 Artikelbezeichnung: 1:6/1:12/1:24 0,80mm Kabel/Schlauch 2m This cable features a wire core in vinyl casing. It’s great for reproducing the various piping and cables which appear on Tamiya's highly realistic scale car and motorcycle models. The wire core ensures greater flexibility and durability than standard hollow tubing in Tamiya model kits. • Length: 2 meters. • Please note that using these cables will require the making of holes in the subject model. .
3,99 €
inkl. Mwst. zuzüglich Versandkosten

1:6/1:12/1:24 0,8x2,0mm Gewebeschl. 1m

Art.Nr.: 300012662 Art.bezeichnung: 1:6/1:12/1:24 0,8x2,0 mm Gewebeschlauch 1m Attention static car and motorcycle modellers! These products are perfect for recreating braided hoses which are commonly used as brake lines, fuel pipes etc. on real life vehicles. The surface texture is artfully depicted using interior rubber tubing wrapped with thread. Simply attach to your model to raise the detail even further! .
5,39 €
inkl. Mwst. zuzüglich Versandkosten

1:6/1:12/1:24 1,00mm Kabel/Schlauch 2m

Art.Nr.: 300012678 Artikelbezeichnung: 1:6/1:12/1:24 1,00mm Kabel/Schlauch 2m This cable features a wire core in vinyl casing. It’s great for reproducing the various piping and cables which appear on Tamiya's highly realistic scale car and motorcycle models. The wire core ensures greater flexibility and durability than standard hollow tubing in Tamiya model kits. • Length: 2 meters. • Please note that using these cables will require the making of holes in the subject model. .
3,99 €
inkl. Mwst. zuzüglich Versandkosten

1:6/1:12/1:24 1,2x2,6mm Gewebeschl. 1m

Art.Nr.: 300012663 Art.bezeichnung: 1:6/1:12/1:24 1,2x2,6mm Gewebeschl. 1m Attention static car and motorcycle modellers! These products are perfect for recreating braided hoses which are commonly used as brake lines, fuel pipes etc. on real life vehicles. The surface texture is artfully depicted using interior rubber tubing wrapped with thread. Simply attach to your model to raise the detail even further! .
5,69 €
inkl. Mwst. zuzüglich Versandkosten

1:6/1:12/1:24 Carbon Dekor Glatt/Ex.Fein

Art.Nr.: 300012680 Artikelbezeichnung: 1:6/1:12/1:24 Carbon Dekor Glatt/Ex.Fein Carbon weave decals are a great way to enhance your models level of realism. Many of Tamiya’s car and motorcycle subjects have parts that depict raw carbon parts, such as winglets, spoilers, and body panels. With Tamiya carbon fiber decal sheets, you can easily replicate these parts on your model with relative ease. Simply cut to the size and shape of the section that you want to cover, and apply. When used in conjunction with Tamiya MARK FIT and MARK FIT STRONG (Tamiya’s decal setting solution solvents), forming the decal sheet to curved surfaces make application even easier. • Sheet dimension: 130mm x 190mm x1. • Sheet features no pre-marked shapes and can be cut to desired shape and size. • Great for use on static models of bikes, cars and more from 1/6 to 1/24 scale. .
7,59 €
inkl. Mwst. zuzüglich Versandkosten

1:6/1:12/1:24 Carbon Dekor Glatt/Fein

Art.Nr.: 300012679 Artikelbezeichnung: 1:6/1:12/1:24 Carbon Dekor Glatt/Fein Carbon weave decals are a great way to enhance your models level of realism. Many of Tamiya’s car and motorcycle subjects have parts that depict raw carbon parts, such as winglets, spoilers, and body panels. With Tamiya carbon fiber decal sheets, you can easily replicate these parts on your model with relative ease. Simply cut to the size and shape of the section that you want to cover, and apply. When used in conjunction with Tamiya MARK FIT and MARK FIT STRONG (Tamiya’s decal setting solution solvents), forming the decal sheet to curved surfaces make application even easier. • Sheet dimension: 130mm x 190mm x1. • Sheet features no pre-marked shapes and can be cut to desired shape and size. • Great for use on static models of bikes, cars and more from 1/6 to 1/24 scale. .
7,59 €
inkl. Mwst. zuzüglich Versandkosten

1:6/1:12/1:24 Carbon Dekor Köper/Ex.Fein

Art.Nr.: 300012682 Artikelbezeichnung: 1:6/1:12/1:24 Carbon Dekor Köper/Ex.Fein Carbon weave decals are a great way to enhance your models level of realism. Many of Tamiya’s car and motorcycle subjects have parts that depict raw carbon parts, such as winglets, spoilers, and body panels. With Tamiya carbon fiber decal sheets, you can easily replicate these parts on your model with relative ease. Simply cut to the size and shape of the section that you want to cover, and apply. When used in conjunction with Tamiya MARK FIT and MARK FIT STRONG (Tamiya’s decal setting solution solvents), forming the decal sheet to curved surfaces make application even easier. • Sheet dimension: 130mm x 190mm x1. • Sheet features no pre-marked shapes and can be cut to desired shape and size. • Great for use on static models of bikes, cars and more from 1/6 to 1/24 scale. .
7,59 €
inkl. Mwst. zuzüglich Versandkosten

1:6/1:12/1:24 Carbon Dekor Köper/Fein

Art.Nr.: 300012681 Artikelbezeichnung: 1:6/1:12/1:24 Carbon Dekor Köper/Fein Carbon weave decals are a great way to enhance your models level of realism. Many of Tamiya’s car and motorcycle subjects have parts that depict raw carbon parts, such as winglets, spoilers, and body panels. With Tamiya carbon fiber decal sheets, you can easily replicate these parts on your model with relative ease. Simply cut to the size and shape of the section that you want to cover, and apply. When used in conjunction with Tamiya MARK FIT and MARK FIT STRONG (Tamiya’s decal setting solution solvents), forming the decal sheet to curved surfaces make application even easier. • Sheet dimension: 130mm x 190mm x1. • Sheet features no pre-marked shapes and can be cut to desired shape and size. • Great for use on static models of bikes, cars and more from 1/6 to 1/24 scale. .
7,59 €
inkl. Mwst. zuzüglich Versandkosten

1:72 Bf-109 G-6 Messerschmitt

Art.Nr.: 300060790 Art.bezeichnung: 1:72 Bf-109 G-6 Messerschmitt In great news for modelers in the compact 1/72 scale, the "Gustav" is to be released as a Tamiya kit! With over 30,000 produced, the Messerschmitt Bf109 is the most prolifically manufactured fighter in history; of its variants, the G-6 was the most numerous at 13,000 aircraft. In response to improving Allied foes in the air, Bf109 G aircraft had the more powerful DB605 engine, and from the G-6 were equipped with dual 13mm MG131 machine guns that required the distinctive bulges on either side of the cockpit cowling known as "Beule." Some were even given a 20mm cannon gondola under each wing for further improved firepower. The Bf109 G-6 was deployed on both the Western and Eastern fronts, in particular dominating Soviet adversaries as it continued in service through to the end of WWII. About the Model - This is a 1/72 scale plastic model assembly kit. - The striking, refined form of the G-6 variant Bf109 is captured, including depictions of the Beule bulges. - This product takes inspiration from the highly accurate 1/48 model (Item 61117). Please note that engine cowlings are depicted closed. - The cockpit is inserted after left and right fuselage halves have been put together. It has an accurate interior with streamlined assembly. - Canopy can be assembled in open or closed state. - Landing gear struts have a solid attachment point for accurate attachment angle and position. - Comes with optional drop tank parts. - 2 marking options are planned - JG51 (distinctive eye marking on the Beule) and JG54. Detaillierter Plastikmodellbausatzwith   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
23,99 €
inkl. Mwst. zuzüglich Versandkosten

1:72 De Havilland Mosquito FB Mk.IV

Art.Nr.: 300060747 Artikelbezeichnung: 1:72 De Havilland Mosquito FB Mk.IV The De Havilland "Mosquito" made of wood was designed based on "high-speed bomber shaking off fighter". The design of the Mosquito was got in shape in 1939. The De Havilland had experienced producing "DH88 Comet" made of wood before, therefore they paid attention that the surface of wooden wing could be finished smoothly and the amount of aluminum could be saved. Two of Rolls Royce Merlin engines were selected as the source of power and the wood was used as the material of this fuselage. The parts with the metal were only the parts of the periphery of the engine and the landing gear. At the first time, the Air Ministry was passive adopting the Mosquito because of wooden and no machine guns. However the Mosquito made a maiden flight with the maximum speed of 630km when the "Spitfire" had the maximum speed of 580km at those time. Therefore a lot of "Mosquito" were suddenly requested. After many types of the Mosquito were produced, Night-Fighter Mk. II armed with 7.7mm machine guns on its nose and A.I.Mk.IV radar made an appearance. This Mosquito brought its ability into full play in attacking an airfield and intercepting raiding bombers. Also Fighting Bomber Mk. VI armed with four 225kg bombs and eight of rocket bombs was arranged as the actual fighting in Mar. 1943. This type played havoc with theland forces, the battleships and the U-boat. Furthermore it was active in attacking the railroad and its bridge at Burmese front line, giving a blow to Japanese army. The mosquito's wooden structure was strong against being shot, therefore it held an established position from the pilots with the special mission. Detailierter Plastikmodellbausatz des Modells De Havilland Mosquito FB Mk.IV im Maßstab 1:72
21,49 €
inkl. Mwst. zuzüglich Versandkosten

1:72 F-16CJ Fighting Falcon m.Zurüsttei.

Art.Nr.: 300060788 Artikelbezeichnung: 1:72 F-16CJ Fighting Falcon m.Zurüsttei. This is the second release of the 1/72 scale F-16CJ [Block 50] Fighting Falcon (original Tamiya release: Item 60786) now with parts depicting underside equipment used on the aircraft! The versatile F-16 Fighting Falcon's adaptability to both air-to-air and air-to-ground missions makes it one of the cornerstones of the U.S. Air Force today. Block 50 evolutions of the aircraft were deployed from 1991, F-16CJ fighters being fitted with radar countermeasures. The aircraft's capabilities were extended yet further via the CCIP program, which gave night fighter functionality and more. Equipment depicted using new parts Centerline fuel tank Wing underside fuel tanks ECM counter measures pod AGM-88 HARM missiles AN/ASQ-213 HTS targeting pod AIM-120 AMRAAM missiles AIM-9M & -9X Sidewinder missiles AN/AAQ-33 Sniper XR pod   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
40,49 €
inkl. Mwst. zuzüglich Versandkosten

1:72 F-51D Mustang North American

Art.Nr.: 300060754 Artikelbezeichnung: 1:72 F-51D Mustang North American Sketched out in a New York city hotel in April 1940, the North American Aviation Corporation NA73X went on to become one of the best fighters to come out of World War 2. The U.S. Army Air Corps gave it the title of P (for Pursuit) 51, and it was named Mustang by the British. Of the several variations of the Mustang, the P-51D is considered the definitive version and was the first to have the bubble canopy. More "D" models were built than any other variant, with a total of 9,603 being produced. Armed with six .50 caliber machine guns, three in each wing, with 400 rounds for each inboard gun and 270 rounds for the other four, plus underwing pylons for auxiliary fuel tans or 1000lb bombs, the Mustang was a true fighter pilots airplane. At the conclusion of WW2, Mustangs were in operation all over the world, flying in several nations air forces. When the Korean conflict broke out, hundred of F (for fighters) 51's were in Japan awaiting scraping. Because they possessed too slow speed maneuverability that was absent in the new jets then entering service, the F-51 was ideal to work with Forward Air Controllers (FAC's) on the ground in Korea. The major drawback to this was the F-51's liquid cooled engine susceptibility to anti aircraft and small arms fire when attacking ground targets. This caused the Mustang to have the highest loss ratio of any aircraft in Korea. A total of 194 were lost in three years, with only 10 being downed in combat with other aircraft. Detailierter Plastikmodellbausatz des Modells F-51D Mustang North American im Maßstab 1:72
14,99 €
inkl. Mwst. zuzüglich Versandkosten

1:72 Focke Wulf Fw 190 A-3

Art.Nr.: 300060766 Artikelbezeichnung: 1:72 Focke Wulf Fw 190 A-3 Development of the FW190 series began in the Autumn of 1937, under a contract issued by the Reichsluftfahrtministerium (Air Ministry) for a single seat fighter to supplement the Messerschmitt Bf109. Two proposals were submitted by Kurt Tank, the technical director of the Focke-Wulf Flugzeugbau (aircraft factory). The proposal using the then new BMW 801 aircooled radial engine was chosen. This tough and powerful engine was placed in a robust airframe and provided superb handling, well balanced control, and brisk acceleration. It entered service in 1941, flying alongside the Bf 109 and it soon took control of air superiority over the English Channel. Establishing itself as a mainstay fighter of the Luftwaffe, it outperformed the contemporary Spitfire Mk.V's in almost every respect and maintained this advantage until the arrival of the Spitfire IX in July 1942. The Fw190 fighter underwent constant improvement throughout its life. The A-3 version used the improved BMW 801Dg engine that produced 1,700hp. Armament was increased from four to six guns, consisting of two rapid firing MG151's in the wing roots; two MG FF's outboard of the landing gear and two fuselage mounted MG 17 machine guns. Throughout WW2, many Luftwaffe squadrons allowed personal pilot markings and distinctive squadron insignia to be used, plus lower cowl, wing tip and rudder color additions to the original paint schemes. Detailierter Plastikmodellbausatz des Modells Focke Wulf Fw 190 A-3 im Maßstab 1:72
14,99 €
inkl. Mwst. zuzüglich Versandkosten

1:72 II-2 Stormovik

Art.Nr.: 300060781 Artikelbezeichnung: 1:72 II-2 Stormovik The Ilyushin Il-2 Shuturmovik was the Russian military's representative ground-attack aircraft during WWII. Over 36,000 examples were built by the end of the war, making it the most produced military aircraft in aviation history. The aircraft was characterized by armor that was integrated into its airframe to provide protection for vital areas such as the cockpit, engine, and fuel tank. Production of the single-seat version of the Il-2 began in March 1941 but severe losses led to the development of a two-seat version with a rear gunner. A version which featured outer wing sections swept back at 15 degrees for a better center of gravity was introduced in late- 1943. Together with the T-34 tank, the Il-2 contributed greatly to the eventual Russian victory. The Tamiya 1/72 aircraft model faithfully captures all the details of this historic aircraft. The Il2 is also available in 1/48 scale for those modelers who have extra display space in their war bird collection.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
31,99 €
inkl. Mwst. zuzüglich Versandkosten

1:72 Jap. Ki-61-Id Hien m. Dekor

Art.Nr.: 300025420 Art.bezeichnung: 1:72 Jap. Ki-61-Id Hien m. Dekor This special limited edition version of the Ki-61-Id Hien in 1/72 (previously released as a "white box" Item 10315 in Japan and the U.S.) is now re-issued with a new full color package! With molded parts given a matte silver color plating to represent the bare duralumin seen on aircraft such as the 244th Air Group (Option B in the kit), and camouflage decals included (they are sold separately from the standard kit Item 60789), this is superb value and sure to be an eye-catcher when built up! About the Model • This is a 1/72 scale plastic model assembly kit.   Approx. length: 125mm, approx. wingspan: 167mm. • The model accurately depicts the Ki-61-Id Hien with   elongated nose and slimline fuselage. • Differences from Item 60789: A and B parts are given a   matte silver color plated finish; camouflage decals from   Item 12683 are included; dedicated instructions for handling   of plated parts are included. • Fuss-free assembly without sacrificing detail was our designer’s   watchword when creating this kit. • The cockpit parts breakdown is changed from its 1/48 scale   counterpart, and can be pre-assembled then slotted into the   already-built fuselage sides. • The fuselage underside radiator/oil cooler is artfully recreated   with a single piece. • One-piece canopy offers excellent fit with fuselage. • Clear parts are included to recreate light and gun sight components. • Optional Venturi tube and fuel cooler parts are also included.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
32,99 €
inkl. Mwst. zuzüglich Versandkosten

1:72 Ki-61-Id Hien

Art.Nr.: 300060789 Artikelbezeichnung: 1:72 Ki-61-Id Hien This scale plastic model kit accurately depicts the Kawasaki Ki-61-Id Hien. The Hien was officially adopted by the Imperial Japanese Army in 1943, and stood out among its Japanese aircraft contemporaries in the Pacific War on account of its liquid-cooled Ha-40 engine, slimline fuselage and long, elegant wing. A number of different variants were produced, among them the Ki-61-Id which featured a 20cm-elongated nose to house 20mm cannons, plus 12.7mm machine guns in the wing. In fact, with 1,360 units it was the most prolifically produced Hien variant; its superior performance at higher altitudes meant that it was often given the brief of taking on incoming U.S. B29 bombers in the skies around the home islands of Japan.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
22,99 €
inkl. Mwst. zuzüglich Versandkosten

1:72 ME-BF 109E-4/7 TRUP

Art.Nr.: 300060755 Artikelbezeichnung: 1:72 ME-BF 109E-4/7 TRUP During the first half of the Second World War, the Messerschmitt Bf109 E was the main fighter of the German airforce. The E-4 housed a 1,100hp Daimler Benz DB 601Aa engine and was armed with two 7.92mm machine guns on the nose, as well as a 20mm cannon on each wing. For some aircraft, bullet-proof glass was used to reinforce the front of the canopy. In addition, a 20mm canon, which ran through a tube in the propeller was supposed to be installed but was unsuccessful. Displaying superb acceleration and diving ability, the E-type planes overpowered the RAF's Hawker hurricane and equaled the Spitfire fighters in the Battle of Britain. However, with a flight range of only 560km, the E-4 planes were limited to just fifteen minutes of combat over British skies. Thus, the bombers were not given sufficient support and sustained heavy damage. As a result, the Luftwaffe's strategy to bomb England into surrender ended in failure. To deal with this drawback, the E-4 planes were equipped with additional 300L fuel tank. These improved fighters, called E-7, were first deployed at the end of 1940. After the Battle of Britain, the E-4/7 planes were sent to the front lines of Northern Africa. As the Bf109 F-type fighter's production was advanced, the E-4/7 was retired from the front lines. However, some veteran pilots continued to use the E-4/7 mainly for ground support duty until the summer of 1942.
15,89 €
inkl. Mwst. zuzüglich Versandkosten

1:72 MIG-29 Fulcrum

Detailierter Plastikmodellbausatz des Modells MIG-29 Fulcrum im Maßstab 1:72   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
16,29 €
inkl. Mwst. zuzüglich Versandkosten

1:72 Mitsubishi A6M2b Zero (Zeke)

Art.Nr.: 300060780 Artikelbezeichnung: 1:72 Mitsubishi A6M2b Zero (Zeke) From the early days of the Second Sino-Japanese War to the end of hostilities in the Pacific, the Mitsubishi Zero served as the Imperial Japanese Navy's main frontline fighter. The first major mass-produced version was the A6M2b, which was equipped with 50cm folding wingtips, landing hook, and radio direction finder for carrierbased operations. Flown by expert pilots, the A6M2b took part in daring operations such as the Pearl Harbor attack and the invasion of the Philippines. It's 3,000km range, powerful 20mm cannon armament, and legendary maneuverability quickly earned the respect of Allied aircrews. The Tamiya model assembly kit faithfully reproduces this historic warplane in 1/72 scale. About the model - 1/72 scale plastic assembly kit. - New tooling for wing, fuselage, and engine cowling. - Wing is depicted in extended position only. - One-piece engine cowling via slide molding manufacturing process. - Detailed cockpit and landing gear wells. - Comes with 3 decal marking options to depict aircraft that took part in the Pearl Harbor Attack.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
27,49 €
inkl. Mwst. zuzüglich Versandkosten

1:72 Mosquito B Mk.IV/PR Mk.IV

Art.Nr.: 300060753 Art.bezeichnung: 1:72 Mosquito B Mk.IV/PR Mk.IV The versatile Mosquito stood with the Spitfire fighter and Lancaster bomber and earned the respect of British pilots during World War II. In 1939, the De Havilland company envisioned the plane to be an unarmed high speed bomber, and had experience with the Comet, which was a wooden racing plane. Except for the engine and landing gear, the Mosquito was comprised of wood, offering strategic advantages. The wooden construction wold save on important metals such as aluminum, it could also be built in converted furniture factories. The Air Ministry was reluctant to adopt the wooden aircraft, but placed orders for 50 planes in March 1940 for reconnaissance use. In November 1940, the Mosquito reached speeds of 630km/h during test flights, demonstrating its potential and quickly prompting additional orders of 150 planes. The Mosquito PR Mk. I reconnaissance plane was first deployed in July 1941; the B Mk. IV bomber started deployment in the Spring of 1942. On May 31, 1942, the Mosquitoes led a daylight raid on Cairn. In September 1942, the Gestapo headquarters in Oslo was bombed. German officials delivering a daytime speech in Berlin were attacked on January 30, 1943. These events demonstrated the Mosquito's ability to carry heavy loads and deliver low altitude surprise attacks with accuracy. The camera equipped PR Mk. IV reconnaissance plane discovered the German Battleship Tirpitz in the Artic Circle and scouted V2 rocket facilities. The Mosquitoes performced their duties with minimal losses, displaying their remarkable abilities. Detailierter Plastikmodellbausatz des Modells Mosquito B Mk.IV/PR Mk.IV im Maßstab 1:72
21,49 €
inkl. Mwst. zuzüglich Versandkosten

1:72 P-47D Thunderbolt Bubbletop

Art.Nr.: 300060770 Artikelbezeichnung: 1:72 P-47D Thunderbolt Bubbletop About the P-47D Thunderbolt One of the most famous planes of WWII, the P-47D Thunderbolt was an outstanding single seat fighter plane excelling in high-altitude bomber escort and low-altitude ground attack. The P-47D featured a turbo-supercharged engine and was active on both the European and Pacific fronts. To solve the problem of insufficient visibility of earlier models, later Thunderbolt models were redesigned with a transparent bubble canopy, leading to the birth of the "Bubbletop". About the Model •Following the successful release of the P-47D "Razorback", Tamiya now introduces its successor, the "Bubbletop" to the 1/72 scale War Bird Collection. •At just 153mm it is the perfect size for collecting •Fuselage and canopy designed with all new parts to accurately represent bulky size •Loads of accessories including 500 pound bombs and M10 rocket launchers •Decals for 2 types of markings, including the 8th Air Force, 78th Fighter Group.
19,99 €
inkl. Mwst. zuzüglich Versandkosten

1:72 P-47D Thunderbolt Razorback

Art.Nr.: 300060769 Artikelbezeichnung: 1:72 P-47D Thunderbolt Razorback The P-47 was the first single-seated fighter to be equipped with a supercharger paired with a 2000hp engine, allowing it to fly at the same high altitude as bombers. Armed with eight 12.7mm machineguns, the Thunderbolt, with the P-51 Mustang, constituted the main fighters of the US Army Air Force. This is the representation of P-47D early production that was nicknamed "razorback" because of the shape of its upper fuselage behind the cockpit. The P-47D was a high-speed, high-altitude capable fighter and escorted the allied bombers that were conducting raids over Germany. Its 1-ton payload and its robustness made the Thunderbolt the perfect aircraft for ground attacking missions. About the Model •Sharp design of rear fuselage accurately reproduced. •Unique belly shape perfectly replicated thanks to left-right symmetrical construction. • Joining beams used to attach wings to fuselage, ensuring accurate wing angle. •Loads of accessories including 2 x 108 gallon tanks, 2 x 500 pound bombs and 2 x M10 rocket launchers. •For extra accuracy, kit comes with two different propellers to match decal markings. •Decals for 2 fighter groups, including one from Europe and one from the Pacific.
19,99 €
inkl. Mwst. zuzüglich Versandkosten

1:72 P-51D Mustang North American

Art.Nr.: 300060749 Artikelbezeichnung: 1:72 P-51D Mustang North American In dieser Militärflugzeugserie finden Sie alle markanten Merkmale der Meisterstücke aus dem 2. Weltkrieg, moderne Jets und Hubschrauber sind naturgetreu nachgebildet. Man kann sich einen einzigartigen Einblick in die Welt der neuesten Düsenjäger, der Kampfflugzeuge des 2. Weltkrieges auf Seiten der Alliierten und der Achsenmächte verschaffen, dazu die verschiedenen Transporthubschrauber und Kampfhubschrauber zur U-Boot- und Panzerabwehr vergleichen. Hier besitzen Sie ein Fenster zu historischen Luftfahrt. Detailierter Plastikmodellbausatz des Modells P-51D Mustang North American im Maßstab 1:72
14,79 €
inkl. Mwst. zuzüglich Versandkosten

1:72 SEIRAN

Art.Nr.: 300060737 Art.bezeichnung: 1:72 SEIRAN This is a plastic model assembly kit of the Japanese Navy's special attacking machine, Harumi, developed for an unprecedented strategy of starting from catapult of a large submarine and launching a surprise attack. Faithfully reproduced a unique style fitted with a tightened nose or twin float equipped with an air-cooled engine. 800kg Movement dollies are also convenient for bombs and exhibitions. I printed a decal for the machine number of 6 aircraft. It would be interesting to explore the sunny storm that ended the war before the actual battle participation, by modeling its unknown ability. Detailierter Plastikmodellbausatz des Modells SEIRAN im Maßstab 1:72
12,79 €
inkl. Mwst. zuzüglich Versandkosten

1:72 Sukhoi SU-27 B2 Sea-Flanker

Art.Nr.: 300060757 Artikelbezeichnung: 1:72 Sukhoi SU-27 B2 Sea-Flanker In dieser Militärflugzeugserie finden Sie alle markanten Merkmale der Meisterstücke aus dem 2. Weltkrieg, moderne Jets und Hubschrauber sind naturgetreu nachgebildet. Man kann sich einen einzigartigen Einblick in die Welt der neuesten Düsenjäger, der Kampfflugzeuge des 2. Weltkrieges auf Seiten der Alliierten und der Achsenmächte verschaffen, dazu die verschiedenen Transporthubschrauber und Kampfhubschrauber zur U-Boot- und Panzerabwehr vergleichen. Hier besitzen Sie ein Fenster zu historischen Luftfahrt. Detailierter Plastikmodellbausatz des Modells Sukhoi SU-27 B2 Sea-Flanker im Maßstab 1:72
23,99 €
inkl. Mwst. zuzüglich Versandkosten

1:72 SUPERMARINE SPITFIRE MK1

Art.Nr.: 300060748 Artikelbezeichnung: 1:72 SUPERMARINE SPITFIRE MK1 The Supermarine Spitfire is regarded by many as the most esthetically designed single seat fighter to appear during the Second World War. It was conceived by the brilliant British designer Reginald J. Mitchell, and first flew on 5 March 1936. It was an advanced, low wing single seat monoplane with a very smooth flush riveted metal skin and a long flowing front cowling. Using the famous RollsRoyce "Merlin' liquid cooled 12 cylinder engine that produced more than 1,000 horsepower, the Mk I Spitfire attained a top speed of 586km/h. The very distinctive elliptical shaped wing was useful in reducing parasitic drag and allowed a fairly thin wing construction. It carried a large coolant radiator under the starboard wing, and a small oil cooler under the port wing, giving it an asymmetrical appearance when viewed from the front and bottom. The retractable main landing gear also contributed to its smooth lines, and gave it higher performance. The Mk I Spitfire was armed with eight 7.7mm machine guns, four to each wing. The early production of Mk I Spitfires used a fixed pitch wooden two blade propeller, which was later replaced with a two-pitch wooden two blade propeller. The Spitfire's combat action in thwarting Germany's attempt to raid the English mainland during 1940, and known as the "Battle of Britain" has ensured this fighter's pride of place in the minds of England's men and women forever.
14,99 €
inkl. Mwst. zuzüglich Versandkosten

1:72 US F-16CJ Fighting Falcon

Art.Nr.: 300060786 Artikelbezeichnung: 1:72 US F-16CJ Fighting Falcon The Lockheed Martin F-16 Fighting Falcon is a single-engine multirole fighter aircraft originally developed by General Dynamics for the United States Air Force (USAF). It was designed as an air superiority day fighter and later it evolved into a successful all-weather multirole aircraft. As of 2012, over 4,500 aircraft have been built since production was approved in 1976. In 2004 and in 2008 Tamiya’s model designers captured this iconic fighter in 1/48 scale and in 1/32 scale respectively, which both models received tremendous accolades from the modeling community and the industry press. The third release continues Tamiya’s tradition of excellence with this 1/72 cale model. This version is specifically of the F-16CJ (Block50) and it shares some of the same level of details as its larger counterparts. It is the perfect scale model for modelers confined to smaller display areas to show off their hard modeling work.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
27,99 €
inkl. Mwst. zuzüglich Versandkosten

1:72 USA F. BELL X-1 MACH BUSTER

Art.Nr.: 300060740 Artikelbezeichnung: 1:72 USA F. BELL X-1 MACH BUSTER In dieser Militärflugzeugserie finden Sie alle markanten Merkmale der Meisterstücke aus dem 2. Weltkrieg, moderne Jets und Hubschrauber sind naturgetreu nachgebildet. Man kann sich einen einzigartigen Einblick in die Welt der neuesten Düsenjäger, der Kampfflugzeuge des 2. Weltkrieges auf Seiten der Alliierten und der Achsenmächte verschaffen, dazu die verschiedenen Transporthubschrauber und Kampfhubschrauber zur U-Boot- und Panzerabwehr vergleichen. Hier besitzen Sie ein Fenster zu historischen Luftfahrt. Detaillierter Plastikmodellbausatz des Modells USA F. BELL X-1 MACH BUSTER im Maßstab 1:72
12,69 €
inkl. Mwst. zuzüglich Versandkosten

1:72 Vought F4U-1A Corsair

Art.Nr.: 300060775 Artikelbezeichnung: 1:72 Vought F4U-1A Corsair About the Vought F4U-1A Corsair Introduced into service in 1942, the Vought F4U-1 featured inverted gull wings and a massive 2,000hp engine spinning the largest propeller mounted on a fighter at the time. While the fighter's performance and toughness was quite impressive, deficiencies such as inadequate forward visibility, restricted all-round visibility due to the early frame-like canopy, and the tendency for the left and right wings to stall at different speeds led to various improvements being added throughout production, eventually resulting in the F4U-1A version. These improvements included a longer tailwheel leg for better forward visibility, a new canopy for better all-round visibility, and an almost unnoticeable 15cm stall strip fixed to the leading edge of the right wing to ensure both wings would stall at the same speed. About the Model •1/72 scale assembly model kit of the Vought F4U-1A Corsair •Kit depicts a final F4U-1A Corsair production version with all improvements or versions at different stages of the improvement process. •Parts for 1000lb. bomb, external fuel tank, two types of propellers, and two types of tailwheel are included to provide many modelling possibilities •High quality decals for 3 different sets of markings
22,99 €
inkl. Mwst. zuzüglich Versandkosten

1:72 WWII Mitsubishi A6M5 Zero Fighter

Art.Nr.: 300060779 Artikelbezeichnung: 1:72 WWII Mitsubishi A6M5 Zero Fighter This is the definitive 1/72 plastic model of the Japanese Navy's representative fighter aircraft, the Mitsubishi A6M5 Zero Fighter. History of the Zero fighter: The Mitsubishi A6M Zero was the Japanese Navy's main fighter throughout the Pacific Theater during WWII. In the latter half of the war, the model 52 Zero, a refined version of the model 22, aimed to take on the ever increasing numbers of high-performance U.S. aircraft. It featured a shorter 11m wingspan with rounded wingtips, was powered by the same 1130hp Nakajima "Sakae" engine as seen in the model 22 Zero, and had the new exhaust propulsion system which gave it a 565km/h top speed. The A6M5 came armed with two 7.7mm machine guns and 20mm belt-fed cannons. Deployment of the A6M5 began in the autumn of 1943, and they saw action in the Solomons campaign as well as over the Marianas. It defended Japan against overwhelming numbers of superior U.S. aircraft up until the very last day of the war.
21,99 €
inkl. Mwst. zuzüglich Versandkosten

1:12 Porsche 934 Jägermeister m. PE

Art.Nr.: 300012055 Art.bezeichnung: 1:12 Porsche 934 Jägermeister m. PE This is a re-issue of our classic kit, now with new slick tire parts! From 1976, the commercially sold race car Porsche Turbo RSR was used in World Sportcar Championship races. As it was to be used in Group 4 GT class and the 930 Turbo was its base, it was called the 934. Its 2,993cc flat-6 turbo-charged engine thumped out an impressive 485hp with 62kg/m of torque. Approximately fifty 934s had been manufactured by May 1977, one of them having gone to the Max Moritz team with an eye-catching orange livery matching the image of their main sponsor German liquor maker Jägermeister. In 1976 season, the Max Moritz team came 4th in the International Championship for Manufacturers, both cars showing great competitiveness throughout the season. About the Model • This is a 1/12 scale plastic assembly model kit.    Length: 360mm, Width: 168mm. • This re-issued version of the kit features new slick tires. • The impressive form of parts such as the large-sized    front bumper spoiler and the widened over fender are    accurately reproduced. • Left and right doors and front and rear hoods are openable. • All of the flat-6 turbo engine's cables, cords, and piping provide    a top quality finish. • The rack & pinion arrangement enables moveable front wheels    linked with the steering wheel. • Moveable front and rear suspension features coil spring dampers. • The Porsche's spartan interior with roll-cage is precisely reproduced. • Photo-etched parts depict brake discs, catch pins, side radiator,    and seatbelt for the ultimate finish. • Sponsor and car number decals are produced by Cartograf.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
134,99 €
inkl. Mwst. zuzüglich Versandkosten

1:20 SF70H #7 Fin. Model MW

  Achtung! Nicht für Kinder unter 14 Jahren geeignet.
244,99 €
inkl. Mwst. zuzüglich Versandkosten

1:100 Space Shuttle Atlantis

Art.Nr.: 300060402 Artikelbezeichnung: 1:100 Space Shuttle Atlantis NASA's space shuttle was first launched on April 12, 1981 and the fleet has accomplished numerous historic missions throughout their 30 years of service. The spacecraft conducted the latest research and played an important role in building the largest structure in space thus far, the International Space Station. The final space shuttle mission ended on July 21, 2011 with the flight of the Atlantis and the shuttle fleet is now destined for public display in museums across the United States.     Achtung! Nicht für Kinder unter 14 Jahren geeignet.
62,99 €
inkl. Mwst. zuzüglich Versandkosten

1:12 Ducati Desmosedici #65 MotoGP´03

Art.Nr.: 300014101 Artikelbezeichnung: 1:12 Ducati Desmosedici #65 MotoGP´03 Der DOHC 16 L Zwillings-V4 Motor ist aus zwei 90° V2 Bauelementen zusammengesetzt, und wird von einem rohrförmigen Stahl-Glitterrahmen zusammengehalten. Ducati setzte in sienen ersten zwei Jahren in der MotoGP, 2003 und 2004 auf L.Capirossi und T.Bayliss.
48,99 €
inkl. Mwst. zuzüglich Versandkosten
inkl. Mwst. zuzüglich Versandkosten

1:12 Honda CB 750F Custom Tuned

Art.Nr.: 300014066 Artikelbezeichnung: 1:12 Honda CB 750F Custom Tuned 1979 führte Honda den CB750F ein. Die Maschine stammt direkt von der Ausführung für die Straßen-Endurance-Weltmeisterschaft ab, welche das Rennen gewann. Der perfektionierte DOHC-4-Takt 4-Zylinder Motor mit 16 Ventilen erzielt mit einem Dachkammer-Verbrennungsraum optimalen Wirkungsgrad.
24,49 €
inkl. Mwst. zuzüglich Versandkosten

1:12 Honda Monkey 125

Art.Nr.: 300014134 Art.bezeichnung: 1:12 Honda Monkey 125 This is a new entry into the famed 1/12 Motorcycle Series, as the all-new Honda Monkey 125 – which went on sale in mid-2018 – quickly joins the Tamiya line-up, too! The Monkey line was first sold in Japan in 1967, and soon gained long-lasting worldwide acclaim with its rather diminutive yet cheerful design. The Monkey 125 features a bigger 124cc engine, yet is packed with the Monkey’s trademark cheeky charm – chunky tires, rounded design motifs for headlight, speedo and more, plus gleaming chromed fenders and muffler cover. This playful little monkey looks set to be another worldwide hit, and now you can get your hands on it, in detailedTamiya 1/12! About the Model - This is a 1/12 scale plastic model assembly kit.   Length: 142mm, width: 63mm, height: 86mm. - The compact, quirky form of the Monkey 125 is captured with   superb accuracy. - Engine, swing arm, front fork and rear fender parts are secured   to the frame using screws for a durable finish. - Metal-plated parts are used to depict fenders and light cases. - Depictions of the chunky tires are dedicated parts for this model. - Comes with clear parts, damper springs, vinyl tubing to recreate   various lines, and of course decals to recreate markings.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
32,49 €
inkl. Mwst. zuzüglich Versandkosten

1:12 Honda RC166 GP Racer 1960

Art.Nr.: 300014113 Artikelbezeichnung: 1:12 Honda RC166 GP Racer 1960 The Honda RC166 is known for its excellent top speeds and features a 6-cylinder engine with six exhaust pipes. The bike was made famous by motor sports legend Mike "The Bike" Hailwood, who raced the RC166 to 10 victories and a world championship title. His infamous bike is reproduced as a model and features red and silver FRP cowling, large diameter drum brakes and silver spoke wheels. .   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
84,99 €
inkl. Mwst. zuzüglich Versandkosten

1:12 Honda VFR 750R 1987

Art.Nr.: 300014057 Artikelbezeichnung: 1:12 Honda VFR 750R 1987 About the Honda VFR750R Honda's release of their limited production, road-going, "works racer" VFR750R made headlines in the motorcycle scene in 1987. The VFR750R is a street-legal counterpart of the formidable RVF750 endurance racer which displayed remarkable potential in the world endurance championships. This bike follows the concept seen in the RVF750, including the use of space-age technology and components such as titanium, carbon-fiber, kevlar, and magnesium. It betters the earlier bikes by a wide margin. The VFR750R also uses a twin-spar aluminum box frame, Pro-Arm (rear swing arm), and a center-lock hub rear wheel. These superlative features and the RVF's racing reputation have made it a collector's item even before the first unit was off the production line. The 748cc, liquid cooled, V4 cylinder 16 valve engine has been kept compact to keep the VFR's overall dimensions very close to the current 500cc Grand Prix racers, for a minimum frontal area. Further, this motorcycle departs from the typical Japanese mass-production practice by using a great deal of human labor on each unit, such as the FRP cowling and windscreen being laid up by hand. The Honda VFR750R is one potent package and has been designed to be very competitive on racing tracks in stock form, yet remain street legal. It will remain a desirable and elusive high performance bike for years to come.
26,49 €
inkl. Mwst. zuzüglich Versandkosten

1:12 Suzuki GSX1300R Hayabusa Street ´98

Art.Nr.: 300014090 Artikelbezeichnung: 1:12 Suzuki GSX1300R Hayabusa Street ´98 Im Jahre 1998 wurde der Suzuki Hayabusa 1300 vorgestellt. Ihre überwältigenden Daten: 175PS, 141 Nm Drehmoment und 215kg Bremslast überstiegen sämtliche Leistungserwartungen. Ein wassergekühlter 1299cm³ Reihenvierzylinder mit 4 DOHC Ventilen ist in einen Aluminium-Doppelrahmen eingebaut. - 142 Bauteile - Bewegliche Teile Länge des Modells: 178 mm
41,49 €
inkl. Mwst. zuzüglich Versandkosten

1:12 Yamaha XV1000 Virago

Art.Nr.: 300014044 Artikelbezeichnung: 1:12 Yamaha XV1000 Virago About the Yamaha XV1000 Virago The motorcycle, along with the automobile, has played a big role in transporting humans from place to place for many years. Man has always been able to adapt his tools for specific needs, and as the motorcycle became more and more a sport, or leisure transportation vehicle, it has been designed for more specific purposes. The off road, touring, motocross and speed bikes as well as the basic transportation motorcycle can be seen in most countries, but America seems to have a certain styling all its own. This so called "Chopper style" came about during the mid 1960's from the many modified Harley's done by members of the many motorcycle clubs around the country. There are many long straight stretches of good, high speed roadways in America, and to sit back comfortably, with feet resting on forward pedals and sitting on a very relaxing saddle, brought about these modifications. The Yamaha Company of Japan is well known for quality bikes around the world, and they have been making bikes for specific areas for years. The Yamaha XS650 Special released in 1978 had the American look, and since then this company has marketed bikes with similar styling. The XV1000 Virago is their latest, large bore, American styled motorcycle and sure to become popular. Its front wheel caster angle of 32 degrees provides an extended wheel base of 1525mm, making its straight running ability superb. The wide, pull back type of handle bars and the forward placed foot rests, allow the rider to sit up as if he was on a horse. A separate looking, loose cushion seat is almost like sitting on a sofa, and it is positioned at a height of only 715mm. The 70hp 981cc twin cylinder is in the "V" format and transmits its power via an enclosed drive shaft for quiet, maintenance free operation. The bike comes with much chrome and lots of gold plating, but it is done in such a manner that the bike does not look gaudy. It is a luxurious and comforta
20,99 €
inkl. Mwst. zuzüglich Versandkosten

1:12 Yamaha YZF-R1M

Art.Nr.: 300014133 Artikelbezeichnung: 1:12 Yamaha YZF-R1M This is the latest release in the storied Tamiya 1/12 Motorcycle Series, and it recreates the 2018 spec of the highly successful YZF-R1M. 2018 is a landmark year for the long-running YZF-R1, as it celebrates its 20th anniversary; the YZF-R1M is the eighth generation of the bike, released in 2015. It was designed as a circuit motorcycle, and its design and technology were heavily influenced by data harvested from the YZR-M1 MotoGP bike. • This is a 1/12 scale plastic model assembly kit. • Multi-piece recreation of the 4-cylinder engine has superlative detail, from the fine depictions of the radiator, oil cooler and complex cover, to the tubing included to recreate various lines. • Depictions of engine, swing arm, front fork, upper cowl and more are screw-fixed to the frame for maximum precision and durability. • New synthetic rubber tires depict Bridgestone Battlax RS10s with realistically-recreated tread pattern. • Metal transfer to depict Yamaha emblem tentatively planned for inclusion.     Achtung! Nicht für Kinder unter 14 Jahren geeignet.
44,99 €
inkl. Mwst. zuzüglich Versandkosten

1:16 Kübelwagen Type 82 Afrika Korps

Art.Nr.: 300036202 Artikelbezeichnung: 1:16 Kübelwagen Type 82 Afrika Korps Kubelwagen-Africa Version Because of its reliability and ease of repair, and since its engine did not require a coolant, the Kubelwagen proved particularly effective in North Africa. At the request of various divisions in North Africa for a vehicle suitable for the desert, a Continental balloon tire equipped version went into production from 1942. Two types of balloon tires, a grooved and an ungrooved version were used. Because the tires were wider than normal tires, a spacer to raise the height of a spare tire attachment was added to the hood of the car. Some of the balloon tire equipped Type 82 were even used in Italy after the fighting in North Africa stopped in May of 1943. About the model •1/16 scale plastic model construction kit •Overall length: 238mm, overall width: 103mm, overall height: 93mm •Precisely replicated balloon tire equipped Kubelwagen Type 82 - Africa version Instrument panel, seats and 4-wheel independent suspension system are also reproduced realistically. •All the doors and engine room cover can be modeled in either open or closed position. •The engine room shows mechanical equipment including air cleaner, 4 cylinder horizontally opposed air cooled engine and repair tools •Balloon tires are of semi-pneumatic rubber and front wheels are steerable. •Includes accessories such as jerry cans and canteen for drinking water, Rommel figure and a driver figure.
99,99 €
inkl. Mwst. zuzüglich Versandkosten

1:16 US KPz M1A2 Abrams Standmodell

Art.Nr.: 300036212 Artikelbezeichnung: 1:16 US KPz M1A2 Abrams Standmodell This Large-Scale 1/16 model recreates the current stalwart of U.S. forces, the M1A2 Abrams. The M1 Abrams has been around since the early 1980s, receiving constant upgrades to ensure that it stays at the cutting edge of military technology. M1A2s were introduced from 1992 and developed as next generations of the tank, chock full of the front-line technology and bringing the M1 into the digital age. They featured depleted uranium armor, a modified commander’s cupola and more, and saw action in the conflict in Iraq in 2003. Specifications •1/16 scale plastic model assembly kit of the M1A2 Abrams. •The form of the M1A2 with its flat turret and hull armor is expertly recreated, complete with depictions of anti-slip surfaces. •Features a tough duralumin chassis. Metal parts recreate drive sprockets, idler wheels, suspension parts and more. •Includes durable pre-assembled resin double-pin tracks secured with metal pins and utilizing rubber pads. •The gun features an aluminum barrel for superb realism. •Photo-etched parts are used to recreate engine deck and turret rear basket.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
479,99 €
inkl. Mwst. zuzüglich Versandkosten

1:20 Lotus Typ 79 1978

Art.Nr.: 300020060 Artikelbezeichnung: 1:20 Lotus Typ 79 1978 • 1/20 scale plastic assembly model kit of the Lotus type 79. • The front and rear upper cowls can be removed after assembly to view the engine and cockpit area. • The monocoque chassis, suspension, and engine have been precisely reproduced. • Synthetic rubber tires included. • Top quality decals to depict the Lotus seen at both British and German GP's, which did not feature JPS markings, are included. • Newly designed tires and metal funnel covers included. • Add further detail to your model with Item 12635 1/20 Lotus Type 79 1978 Photo-Etched Parts Set.  
62,99 €
inkl. Mwst. zuzüglich Versandkosten

1:20 Tyrrell P34 Six Wheeler Monaco GP77

Art.Nr.: 300020053 Artikelbezeichnung: 1:20 Tyrrell P34 Six Wheeler Monaco GP77 About the Tyrrell P34 In the 1976 F1 World Championships, Tyrrell P34 six-wheeler made its debut and demonstrated outstanding performance throughout the season. In the following season, P34 obtained First National City Bank as its main sponsor and changed its cowl painting to blue and white two-tone. The P34 in this season featured full engine cowling to improve aero-dynamics and was driven by P. Depailler and R. Peterson. Tyrrell encountered trouble when the development of P34's unique front tires stagnated as a result of the tire war between Michelin and Goodyear, but they continued their efforts to win by making minor-alterations to their P34 machines throughout the season. About the Model 1/20 scale assembly model kit depicts Tyrrell P34 as it appeared in the Monaco GP, 1977 with the same half engine cowling of the previous season. Overall length: 201mm, overall width: 101mm Model captures the unique form of the Tyrrell P34 with rear seat cowl, front brake cooling air duct, stabilizer, rear wing side plate, and taillight. Ford Cosworth DFV engine portrayed with the utmost detail. Gear box, ignition, and wheels are all precisely recreated. Driver figure included. Markings included for recreation of two machines: #3, R. Peterson and #4, P. Depailler.
33,49 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Castrol Celica

Art.Nr.: 300024125 Art.bezeichnung: 1:24 Castrol Celica When the curtain went up on the 1993 World Rally Championships, the "92 title winning Toyota Team of Europe were ready to take on their capable rivals Lancia, Ford, Subaru, Mitsubishi, and the others, making this Monte Carlo Rally a very exciting event for motorsports fans. Toyota"s highly sophisticated Celica GT-Four RC, with driver Didier Auriol at the wheel, showed impressive performance by out-running all competition to dominate this first round of the season. Regarded as one of the most technologically advanced and potent rally racing machines available today, the Celica GT-Four RC is powered by a 2 liter, liquid cooled in-line four cylinder DOHC, turbocharged engine, capable of yielding 299 HP and 45.9kg/m of torque. This tremendous power is channeled via 6-speed gearbox to all four wheels. The electronically controlled torque-splitter distributes 50:50 front/rear power under normal operations, but is capable of automatically shifting to other ratios when the power distribution sensor detects a change in road surface conditions or even driving style. Night running equipment used during Monte Carlo Rally included quadruple spot-lamps plus cornering lamps that made the racer look even more massive.
18,79 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Mercedes Benz 300SL Flügeltürer

Der Mercedes-Benz 300 SL ergänzt als klassischer Sportwagen die Tamiya Sportwagen-Serie im Maßstab 1:24. Das Originalfahrzeug wurde ursprünglich als Prototyp für das hauseigene Rennteam produziert, um damit an nationalen Rennen und Meisterschaften teilzunehmen. Im Jahre 1954 debütierte ein Serienfahrzeug auf der Internationalen Automobil-Ausstellung in New York. Trotz seines „Straßenauto-Status" war der 300 SL ein rassiges und elegantes Fahrzeug, das in den Vereinigten Staaten sehr populär war und großen Anklang fand. Er verfügt über einen 3-Liter-Reihen-6-Zylinder Motor - daher auch die „300" in seinem Namen-, eine extrem leichte Karosserie - SL steht für „Sport Leicht" bzw. „Leicht Sport"- und die markanten Flügeltüren. Bis zum Produktionsende im Mai 1957 wurden 1.400 Einheiten produziert. Der Tamiya Bausatz spiegelt alle Details wider: den komplexen Gitterrohrrahmen, die markanten Flügeltüren und noch viele weitere – somit steht das Modell dem Original in nichts nach. Produktdetails: Modell-Bausatz im Maßstab 1:24 Die zeitlos elegante Form dieses Klassikers ist atemberaubend vom Modell erfasst und umgesetzt. Die Motorhaube und Flügeltüren können geöffnet werden. Die Türen lassen sich in geöffneter Stellung mit einer kleinen Strebe verriegeln. Unter der Motorhaube verbergen sich der sehr detaillierte Motor und Motorraum. Die Motorhaube kann auch in geöffneter Stellung arretiert werden. Der Komplex Gitterrohrrahmen - einer der Signaturpunkte des Autos - ist detailgetreu reproduziert. Zur Detaillierung des vorderen Lufteinlasses befindet sich Nylon-Gitter im Lieferumfang Viele Chromteile z.B. Zierleisten, Stoßstangen und mehr sind im Bausatz enthalten. Masking Tape für die Scheiben - sind im Bausatz enthalten Metall-Transfers Dekor sind im Bausatz enthalten (Spiegelflächen, Embleme). Originalgetreue Reproduktion der Reifen Lieferumfang: Detaillierter Bausatz (unlackiert), Dekor, Aufbauanleitung   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
55,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Nissan Skyline 2000GT-R Str. Custom

Art.Nr.: 300024335 Art.bezeichnung: 1/24 Nissan Skyline 2000GT-R Str. Custom The hard-top version of the Skyline 2000GT-R was released in 1970 and packed a serious punch with a detuned version of the inline-6 engine seen on the Nissan R380 prototype racing car. The "hakosuka", as it is affectionately known in Japan, is still a Japanese racing legend today, thanks to an incredible 50 total wins achieved in partnership with the 1969 4-door sedan GT-R. Now, it makes an appearance as a production model of the car with parts depicting popular customizations from its day, as well as a realistic driver figure.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
47,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Nissan Skyline GT-R (R32) Nismo-Cu.

Art.Nr.: 300024341 Art.bezeichnung: 1/24 GT-R (R32) Nismo-Custom This is a model of the classic Skyline GT-R (R32). This particular kit varies from previous releases as it has brand new parts that depict customizing accessories that were designed and made by Nissan's tuning outfit Nismo. The R32 is the 1989 version of the legendary GT-R. It had a 4WD drivetrain; it was mated to a 280hp engine and it was loaded with cutting-edge design and technological innovations for its day.
35,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Porsche 959

Art.Nr.: 300024065 Artikelbezeichnung: 1:24 Porsche 959 The Porsche 959 was first unveiled at the 1983 Frankfurt auto show as a study for a full time 4 wheel drive Group B super sports car. Back then, the automobile was still far from being completed and its potential a mystery. The 959's awesome capabilities matured through thorough research and competition experience with the automobile. It demonstrated its outstanding abilities during the grueling Paris-Dakar Rally, and the Le Mans 24 hour endurance race. Porsche has taken their race car technology and put it into the 959, to produce a car that provides every comfort, with smooth running and the low interior noise expected of a road car, while offering high safety reserves. Thus the 959, despite its massive 450hp engine power, can be drive easily at its lower RPM ranges. The 2848cc engine is a descendent of the famous 956 and 962 Porsche Group C racer. It is an air/liquid cooled, flat 6 cylinder, DOHC equipped with two turbochargers, providing a top speed of more than 300km/h. The 959 maintains superb acceleration under all driving conditions, yet it also achieves short braking distances that prove to be a reassuring factor for all classes of drivers. The hollow wheel spokes increase air volume to the brakes and accommodate the fat, low profile Dunlop Denloc tires, and is equipped with a pressure sensor to detect punctures. The Porsche 959 is the car that raised the standard of sports car thinking to a new plateau, by exceeding every known yardstick of handling and performance.
22,49 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Renault Alpine A110 ´71 Monte Carlo

Art.Nr.: 300024278 Artikelbezeichnung: 1:24 Renault Alpine A110 ´71 Monte Carlo In 1997, Tamiya released the street version of the Alpine A110 as a 1/24 scale model, and its perfect duplication of the car's nostalgic design was a big hit. Now, Tamiya presents the rally version of the Alpine A110, representing the car that won the 1971 Monte Carlo Rally. The Alpine was developed by Jean Redele, who initially raced with the Renault 4CV. He soon noticed the limitations of its heavy body, and decided to replace it with his own design made of FRP. Redele drove a modified 4CV, dubbed the Alpine, to victory in the Mille Miglia road race in 1955, and continued to develop new versions based on Renault cars. The Alpine A110 was released in 1963, and was based on the Renault 8. It had a 956cc 4-cylinder engine at the rear and lightweight body shell made of FRP. Front suspension featured the independent double wishbone type, while the rear used swing arms. The A110 proved its ability by dominating road races held throughout the late 60's and early 70's, with its win at the 1971 Monte Carlo Rally undoubtedly crowning the pinnacle of its career. With its successful record and beautiful design, the Alpine A110 is adored by motor sports fans worldwide. Skillful reproduction of the Alpine A110's low and sleek body styling. Overall Length: 161mm. Exquisitely designed decals reproduce the A110's 1971 Monte Carlo Rally markings. Amazingly precise details of car's mechanisms, including rear-mounted inline 4-cylinder engine, front and rear suspension and special rally wheels. Includes dash-mounted odometer and other features specific to the rally version.
45,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Subaru Impreza WRC 2001

Art.Nr.: 300024240 Artikelbezeichnung: 1:24 Subaru Impreza WRC 2001 Soon after the adoption of the new regulations for the World Rally Championships in 1997, Subaru boldly entered their Impreza WRC. That well-balanced machine was equipped with a powerful horizontally opposed 4 cylinder turbo engine, and secured that year's Manufacturers Title. In the following years, various improvements were made to the car in accordance with changes in the production model. The 2001 Impreza adopted a four-door sedan body and first showed itself at the season opener, the Monte Carlo Rally. The unique appearance of the car was highlighted by small compound headlights, spoiler attached to the extreme rear and blister-style fenders. The engine underwent extensive tuning in an effort to boost responsiveness, and major progress was made in regards to electronic control of the semi-automatic transmission and front, center, and rear differential gearing. Subaru's ace driver, Richard Burns, was accompanied by Markko Martin, Petter Solberg, and Toshihiro Arai.  
31,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Toyota Corolla WRC

Art.Nr.: 300024209 Artikelbezeichnung: 1:24 Toyota Corolla WRC In its long and illustrious career in the World Rally Championships, Toyota has mainly used the Celica as its flagship. In 1997, however, a rule change in the WRC presented Toyota with a chance to demonstrate its innovation. Permission was granted to equip the base of the Toyota's widely marketed production car with a turbo-charge and four-wheel drive system, as well as modify the engine without restriction. The more compact body of the Corolla was chosen for the development of the new rally car, and the Corolla WRC car was born. Using components tried and tested on the Celica, the Corolla WRC was equipped with a front loaded, 2-litre, 4-cylinder 3S-GTE turbo engine and 4-wheel drive. Highly reliable MacPherson struts make for a winning suspension on both the front and rear. In addition, the side of the steering column was equipped with a sequential shift lever, called a "joystick", allowing a 6-speed transmission control. With hydraulic brakes that automatically sense the movement of the wheels and a center differential equipped with a hang-on clutch, the Corolla WRC is stock full of the latest electronic gadgetry. A size smaller than the Celica, the Corolla WRC is perfectly suited for the winding country roads of the Rally. The Corolla WRC debuted in the Finland Rally of 1997, which led to a half year of testing before fully entering the WRC in 1998. Main drivers Carlos Sainz and Didier Auriol showed winning skill.
28,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Toyota GT-One TS-020 LeMans ´99

Art.Nr.: 300024222 Artikelbezeichnung: 1:24 Toyota GT-One TS-020 LeMans ´99 About the Toyota GT-One TS020 "The Longest Day in France", also known as the 24 Hours of Le Mans endurance race, takes place two hundred kilometers southwest of Paris, in the city of Le Mans. This high-speed circuit is made up of public roads closed off for the race, which stretch to 13.6 kilometers in length-the world's longest circuit track. Throughout the long history of the Le Mans, two or three major manufacturers have always fought for the top honors, but the 1999 race boasted six major contenders. The Toyota GT-One TS020 led the grueling 24 hour event right up until one hour before the finish, when it was struck with an untimely tire blowout, but still managed to finish second. Subtle refinements to the sleek carbon fiber composite body of the GT-One TS020 were conducted in the pursuit of optimal aerodynamics. The 3600cc V8 twin turbo R36V engine also underwent various modifications, improving power, torque, and fuel efficiency. About the Model • 1/24 scale plastic assembly model kit based on the GT-One TS020 of the 1999 Le Mans. • Overall length: 202mm, overall width: 84mm. • This model boasts faithful recreation of innovative aerodynamics. • Highly detailed nose and diffuser-just like the full size car. • Rear cowl is removable, allowing modeler to view the detailed V8 twin turbo engine even after completion. • Kit includes decals for Car no. 1 and 3. • Masking seals are also included for accurate body painting.  
35,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Toyota Supra

Art.Nr.: 300024123 Artikelbezeichnung: 1:24 Toyota Supra During the early 1970's, the Toyota Motor Company of Japan ventured into the specialty car field, and soon established a reputation for producing cars with both quality and performance. Their "Supra" series is often described as a re-creation of Toyota's legendary 2000GT sports car, which was an excellent combination of high performance and elegance. Using their latest racing automotive technology, plus their uncanny design genius, the newly designed Supra made its sensational debut during February 1993. Massive and powerful are the words that can best describe this awesome specialty sports car. The top of the line Supra uses a 3-Liter, DOHC 24 valve, straight six cylinder, twin-turbocharged engine, capable of 320 horsepower and 43.6kg/m of torque. In contrast with the company's previous Supra model, which had a very fluid styling composed of gentle curves, the new Supra has a bold dramatic appearance due to its wider body and larger 17-inch wheels. An oversized rear wing has been installed to improve downforce performance during high-speed cruising. This Supra's newly refined suspension has one of the best road holding systems offered by any mass produced sports car, and with its ventilated disk brakes fitted at all corners, and the front end utilizing four piston calipers, it has unmatched stopping power. Toyota's Supra is this company's attempt to furnish a car that has uncompromised drivability, safety, high performance and relaxing comfort.
27,49 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Volkswagen Käfer 1300 1966

Art.Nr.: 300024136 Artikelbezeichnung: 1:24 Volkswagen Käfer 1300 1966 Even in this age of sophistication, the popularity of the Volkswagen "Beetle" has not diminished. The original design dates back to the 1930"s when Dr. Ferdinand Porsche provided the design framework for the "People"s Car." Today, with more than 20 million units produced, the Volkswagen Beetle has become a symbol of mass-produced motorization, with no other vehicle exceeding this figure. Built upon the sturdy platform chassis is the amazingly reliable air cooled, flat-four cylinder engine. Suspension is four wheel independent for crisp handling and driving comfort. Although the onset of the Second World War greatly hindered Volkswagen"s marketing opportunities, it made a superb comeback shortly following the conflict, under the skillful guidance of Heinrich Nordhoff. Throughout its production life, the Volkswagen was continuously improved to meet modern automobile standards. An enlarged powerplant displacement and better visibility are two of the notable changes that enabled the Beetle to set standards for the compact car market, decade after decade. The 1966 Volkswagen model is regarded as the classic Beetle, one that retains the most of the original design traits, and it has become a collector"s item. Even today, more than half a century later, watching a nimble street bug is still a pleasant sight to behold, and its unmistakable shape will likely delight generations to come.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
26,49 €
inkl. Mwst. zuzüglich Versandkosten

1:32 F-4J PHANTOM II MARINES

Art.Nr..: 300060308 Artikelbezeichnung: 1:32 F-4J PHANTOM II MARINES About the McDonnell Douglas F-4J Phantom II Marines When test pilot Robert C. Little prepared to take off in the YF4H-1 prototype on May 27, 1958, few onlookers could have guessed at the success story yet to unfold. Over thirty years from that faithful day, the successors of that prototype, the Phantom series of aircraft, would be protecting the skies over the free world and see adoption by eleven nations including the U.S. Navy, Air Force and Marines. The Phantom II was developed by McDonnell Douglas and first pitted against Vought's F8U-3 Crusader III to see which aircraft would be the Navy's next main carrier-borne fighter. In 1959, the selection was made in favor of the robust Phantom II. The early production model, the F4H-1F, underwent various tests and training exercises, eventually leading to the F4H-1 model, which was deployed to several Navy and Marine divisions. In 1962, in efforts to unify the names of Navy and Air Force aircraft, the F4H-1F and F4H-1 became designated the F-4A and F-4B respectively. Just after its adoption by the Navy, the Phantom II showed the world what it was made of, breaking record after record, including top-speed, altitude, and time-to-climb. To top off these results, the U.S. Navy ran Project LANA, a transcontinental speed race. The roman L stood for the number 50, for "50th Anniversary of Naval Aviation". The contest was to demonstrate the Phantom's shocking speed and reach. Based on this impressive track record, and on comparative tests against Air Force fighters at the time, it was decided that the next main fighter of the Air Force would also be the Navy's Phantom II. The F-4B version was specially tailored to the needs of the Air Force, and became designated the F-4C. Further improvements to that aircraft resulted in the F-4D model. The Navy continued to make improvements to the Phantom II. Mounting the F-4B with an automatic carrier landing system, yet another variant, the F-4G
124,99 €
inkl. Mwst. zuzüglich Versandkosten

1:32 Lockheed Mar.F-16CJ Fighting Falcon

Art.Nr.: 300060315 Artikelbezeichnung: 1:32 Lockheed Mar.F-16CJ Fighting Falcon Die F-16CJ wurden abgestellt, um im Anschluss an den Golfkrieg über der Flugverbotszone zu patrouillieren und 2003 nahmen mehr als 70 F-16CJ an der Operation Freiheit für den Irak teil. Sie hatte einen F110-GE-129 Triebwerk, mit der sie eine Mach 2,0 Höchstgeschwindigkeit erreichen kann.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
149,99 €
inkl. Mwst. zuzüglich Versandkosten

1:32 Mc Donnell DOUGLAS F-15 EAGL

Art.Nr.: 300060304 Artikelbezeichnung: 1:32 Mc Donnell DOUGLAS F-15 EAGL About the McDonnell Douglas F-15C Eagle At one time during the missile boom years, the U.S. Air Force believed future air battles could be decided by air-to-air missiles rather than guns in the traditional dog-fighting manner. The need for air superiority weapons was relearned during the Vietnam Conflict and led to an Air Force requirement for an all-weather, single-seat, twin-engined fighter. This aircraft was to optimize counter-air operations. The U.S. Air Force requested several manufacturers to study and develop prototypes during the late 1960's under the FX program (Fighter Experimental). McDonnell Douglas was awarded a contract to develop the F-15 Eagle jet fighter in December 1969. The Eagle's advanced aerodynamic design greatly reduced drag at both the low and high lift configurations, and achieved superior maneuverability during varying flight conditions. Making its maiden flight in July 1972, it was deployed in November 1974 as the F-15A Eagle, and had been in active service since then. It is powered by two Pratt & Whitney F100 afterburning turbofan engines developed exclusively for the for the F-15, and is capable of speeds in the Mach 2.5 range. The F-15 can carry a heavy load of devastating weapons, including the internally mounted 20mm M61A-1 Vulcan cannon, with 940 rounds of ammo, the AIM-7 Sparrow radar guided missile and AIM9 Sidewinder short range air-to-air missile. In 1979 an upgraded version of the Eagle was introduced as the F-15C. One notable change was the increase in fuel capacity, but even more fuel was made possible by the conformal fuel tanks, which snuggle between the wings and up against the jet inlet ramps. This increase in fuel capacity enables the Eagle to expand long range operations, such as escorting AWACS and strike aircraft to their targets. The Landing gear has been reinforced to accept the extra fuel weight, allowing a maximum take-off weight of 68,000 lbs (30844 kg). The F   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
112,99 €
inkl. Mwst. zuzüglich Versandkosten
Versandinformation

Wenn Sie diesen Artikel in den Warenkorb legen, ist die Lieferadresse Ihrer Bestellung auf folgende Länder beschränkt:

nach oben