Diese Website verwendet Cookies. Durch die Nutzung der Website stimmen Sie der Verwendung von Cookies zu.
OK
Tamiya CarsonMajoretteDickie ToysSchuco 

1:48 Jagdpanzer Elefant

Art.Nr.: 300032589 Artikelbezeichnung: 1:48 Jagdpanzer Elefant This is a 1/48 scale assembly model of the German Heavy Tank Destroyer Elephant. The newly tooled 1/48 Elefant has extensive detail, even at this smaller scale, thanks to the extensive research conducted by Tamiya's designers to make the 1/35 scale rendition. The development of the full-size Elefant is an interesting case study in weapons development. Its chassis was developed by Porsche in the design competition for the Tiger I, but while Porsche was sure enough of its success to ready 100 examples of the chassis before the end of the competition, the design was not chosen. The "left over" chassis were turned into the Elefant on the orders of Hitler in 1942 - some 90 examples were built by May 1943. With armor plates, up to 200mm thick and a powerful long-caliber 8.8cm gun, it was a formidable piece of equipment, and served German troops until the end of WWII.
30,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 Jap. Ki-61-Id Hien (Tony) Flzg.

Art.Nr.: 300061115 Artikelbezeichnung: 1:48 Jap. Ki-61-Id Hien (Tony) Flugzeug The Kawasaki Ki-61 Hien was a WWII Japanese fighter powered by the Ha-40 engine - a license-produced version of a Daimler-Benz power plant. On account of its liquid cooled engine (it was the only Japanese fighter in the Pacific fighting to have one), the Hien was apparently mistaken for a German aircraft and then for an Italian bird, and was given the reporting nickname "Tony." It saw combat action from early 1943 and proved a competitive aircraft with its top speed of 580km/h, used in the desperate Japanese defense of the Solomon Islands and even as an interceptor when U.S. B-29s got in range to bomb the Japanese home islands toward the end of WWII.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
45,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 Jap. Mitsu. J2M3 Interceptor Raiden

Art.Nr.: 300061018 Artikelbezeichnung: 1:48 Jap. Mitsu. J2M3 Interceptor Raiden The J2M Raiden (Allied reporting name "Jack") was developed by the Japanese Navy in WWII as a land-based interceptor. It began to reach units from September 1944 and they were used to intercept B-29 bombers which were attacking Japan. This kit accurately depicts the J2M3 variant and allows modellers to assemble either deployed or retracted landing gear. Parts for a drop tank and two pilot figures, as well as three marking options, including a 302nd Kokutai aircraft, are included.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
15,89 €
inkl. Mwst. zuzüglich Versandkosten

1:48 JGSDF MCV Type 16 (8x8) (1)

Art.Nr.: 300032596 Art.bezeichnung: 1:48 JGSDF MCV Type 16 (8x8) (1) This scale model assembly kit recreates the Japan Ground Self Defense Force (JGSDF) Type 16, which reached units beginning in 2017. An 8-wheel vehicle, the JGSDF classify it as a Maneuver Combat Vehicle (MCV), a highly mobile and well-armed vehicle intended to provide supporting fire and take on enemy armor as a part of rapid response units. Its domestically designed L/52 105mm rifled gun is a low-recoil piece with perforated muzzle brake and a fire control system to enable accurate firing on the move. Rolled steel turret and hull employ modular and spaced armor estimated to be able to survive frontal hits from 20-30mm class guns and portable anti-tank weapons. Thanks to its 570hp engine, the 26-ton Type 16 has a top speed of around 100km/h and significant range; it looks set to provide a major boost to JGSDF units as its rollout continues. • 1/48 scale plastic model assembly kit. Length: 176mm, width: 63mm. Model has a dedicated parts breakdown for a hassle-free build without sacrificing accuracy. • An accurate rendering is based upon extensive research of the actual Type 16, authentically capturing the modern silhouette with a moving depiction of the 105mm gun. • Features crisp molding on details such as non-slip surfaces, plus multi-piece machine gun and mount. • The 8-wheel suspension is depicted in style, with fixed wheels. Elastomer tires have a realistic tread pattern. • Decals are included to recreate periscope openings and muzzle brake perforations. • Comes with one commander figure and two marking options.
28,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 Lockheed Mar.F-16CJ Fighting Falcon

Art.Nr.: 300061098 Artikelbezeichnung: 1:48 Lockheed Mar.F-16CJ Fighting Falcon About the F-16CJ The F-16 is one of the world's top lightweight multi-role fighter aircraft. Since first deployment to U.S. Air Force (USAF) units in the late 1970's, total production numbers have exceeded 4,000, making it the second most highly produced jet fighter plane following the F-4 Phantom. The latest F-16 variant deployed to USAF units, the F-16C Block 50, is capable of precision night and all-weather bombing, and features advanced digital electronics for radar and cockpit displays. The slight variant, the F-16CJ (Block 50), is fitted with HARM Targeting System (HTS) and is used specifically for SEAD (Suppression of Enemy Air Defenses) missions. The F-16CJ (Block 50) has flown SEAD missions over Iraq while monitoring the northern and southern no-fly zones and during Operation Iraqi Freedom. About the Model - Model represents the F-16CJ (Block 50) as used for USAF SEAD missions. - Sleek fuselage including aerodynamic blended wing body design accurately reproduced. - Accurately curved bubble top canopy can be assembled in the opened or closed position. - Horizontal stabilizers are movable and flaperons can be modeled in both the up or down positions. - A range of weapons and accessories are included such as HARM, AMRAAM, and Sidewinder missiles (M & X variants), detachable external fuel tanks, ECM pod, and HTS pod. - One pilot figure included and can be depicted with either standard or JHMCS flight helmet. - Detailed markings for 3 aircraft, including the 5th Air Force commander's aircraft stationed at Misawa airbase in 2005, are included.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
59,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 Lockheed Martin F-16C Block 25/32

Art.Nr.: 300061101 Artikelbezeichnung: 1:48 Lockheed Martin F-16C Block 25/32 About the F-16C Block 25/32 The F-16 has become one of the most widely-used jet fighters in the world, and has therefore undergone a series of upgrades throughout its service life with various air forces. The Block 25entered service in 1984 and featured upgraded radar and cockpit avionics. The Block 32 was the first upgrade affected by a program to use different engines in the F-16, and continued to use Pratt & Whitney engines, while the Block 30 used engines made by General Electric. The Block 32 has been upgraded to carry a wide range of weapons, including the LITENING II laser targeting pod, which enables precision attack capability with laser-guided bombs. About the Model - Model represents the F-16C [Block 25/32]. New parts accurately reproduce the correct engine nozzle and smaller air intake that correspond to Pratt & Whitney powered F-16s. - Main landing gear and gear well covers also depicted with new parts. - Wing reinforcement plates for Block 32 recreated with phot etch parts (sold seperatley). - Extensive weapons set features AIM-9L/M and AIM-9X sidewinders, AIM-120 AMRAAM, wing and centerline fuel tanks, and LITENING II targeting pod. - New parts for GBU-12 laser-guided bombs feature clear parts to depict the laser guidance package for a more realistic finish. - New ordinance racks on the wings accurately match their respective weapons. - 1 pilot figure included and 3 sets of U.S. Air National Guard markings included. - Add ITEM 12621 F-16 Fighting Falcon Detail Up Parts Set for the ultimate finish.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
69,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 Matilda Mk.III/IV British Infantry

Art.Nr.: 300032572 Artikelbezeichnung: 1:48 Matilda Mk.III/IV British Infantry This is a 1/48 scale plastic assembly model of the British Matilda previously available in 1/35 scale. Historical background: The Matilda was developed as a heavily armored infantry tank and was one of the British Army's main tanks in North Africa during WWII. The Matilda swept aside opposing Italian tanks and was respectfully called the "Queen of the Desert" by German forces. During Operation Battle axe to lift the siege of Tobruk in June 1941, German forces famously used their 88mm AA guns in the anti-tank role as they were the only effective counter against Matildas.
32,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 Messerschmitt BF109E-4/7 Trop

Art.Nr.: 300061063 Artikelbezeichnung: 1:48 Messerschmitt BF109E-4/7 Trop The Messerschmitt Bf 109E was the Luftwaffe's mainstay fighter in the early stages of WWII. This kit depicts the E-4, which was produced from May 1940 and saw extensive action during the Battle of Britain, and the E-7, which was fitted with a drop tank for increased range. The angular form of the aircraft has been accurately reproduced complete with details such as a canopy that may be assembled in open or closed position, a rack for the E-7's drop tank, and the Trop version's air intake with sand filter. One pilot figure and three marking options are included.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
27,49 €
inkl. Mwst. zuzüglich Versandkosten

1:48 Mitsu. A6M3 Zero Fighter T32 Hamp

Art.Nr.: 300061025 Artikelbezeichnung: 1:48 Mitsu. A6M3 Zero Fighter T32 Hamp About the A6M3 Type 32 Zero Fighter (HAMP) Much has been written over the years about the Japanese Zero Fighter Aircraft series. Much was based upon hearsay and legend and little upon fact itself. Even the Allied Forces and governments refused at first to acknowledge its existence, and when they did get a copy of it, they could hardly believe the performance it produced. The prototype zero or A6M1 first took place on paper on January 17, 1938, following the Japanese request for a shipboard fighter with a top speed of 27o kph at 12000 ft 7 6-8 hours of cruise economy endurance and 1.5-2 hours at normal combat speeds. Armament was to be two 20mm cannon and two 7.7mm machine guns plus the normal radio equipment and direction finding gear. These specifications wee so far from the existing state of the art that the famous Nakajima Company dropped out of competition, stating that they were impossible to meet. That left Mitsubishi Heavy Industries and their design team headed by Jiro Horikoshi the only company to tackle the problem. First flight was on 1 April 1939 and combat trials were concluded in July 1940 with 15 pre-production A6M2's sent to two squadrons by the end of the month. These aircraft had folding wing tips to accommodate aircraft carrier elevators, and were the ones first seen by Gen. Chennault in China, and at Pearl Harbor in December 1941. Although the A6M2 met or exceeded original design specifications, modifications were taking place at the Mitsubishi factory to improve roll rate, speed up handling aboard carriers, and utilize the uprated Sakae 21, 1,130 hp engine. The first A6M3 type 32 (code named HAMP) took to the air on 15 July 1941 with production beginning in April 42. A total of 343 aircraft were produced by August 43, when the type 52 A6M5 began production. The Type 32 Zero had the most radical change in the entire series and was readily recognized by its squared off wing tips. This   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
15,89 €
inkl. Mwst. zuzüglich Versandkosten

1:48 Rus. Ilyushin LI-2 Shturmovik

Art.Nr.: 300061113 Artikelbezeichnung: 1/48 Rus. Ilyushin LI-2 Shturmovik The Ilyushin Il-2 was one of the most significant ground-attack aircraft of WWII. It incorporated a sturdy monocoque construction and excellent armor protection to make it perfect for ground attack operations. It was initially conceived as a two-seat design but due to weight issues it was re-designed as a lighter single-seat aircraft in 1940. As production began in 1941, the aircraft was designated as the Il-2. Heavy losses of the single-seat aircraft during combat forced the addition of a rear gunner position in 1943. Later variants featured improvements such as swept outer wings for better handling. The Il-2 contributed greatly to the eventual Russian victory over Nazi Germany. Joseph Stalin himself famously noted that the aircraft was as vital to the Russian Army as air and bread.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
56,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 Sd.Kfz 232

Art.Nr.: 300032561 Artikelbezeichnung: 1:48 Sd.Kfz 232 During the first half of WWII, German reconnaissance units greatly used the Sd.Kfz.231 series heavy armored car. Above all, the Sd.Kfz.232 was equipped with a Fu.11 radio and featured a large frame-type antenna mounted on the body. It also came armed with a KwK30 20mm cannon and an MG34 machine gun mounted on its turret. The 8-wheeled Sd.Kfz.232 had an on-road top speed of 90km/h, featured elaborate front and rear driving positions, and a superb 8-wheel drive system. These 8-wheeled armored cars were deployed to armored reconnaissance battalions of Panzer divisions and served as the eyes of the German army from Europe and North Africa to the Russian front. The Tamiya 1/48 scale model kit carefully captures all the fine detail of the full size subject. This subject was only previously available in 1/35 scale and it's now part of the Tamiya 1/48 scale model collection.
29,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 Sd.Kfz.251/1 "Stuka z.Fuss" Halbk.

Art.Nr.: 300032566 Art.bezeichnung: 1:48 Sd.Kfz.251/1 "Stuka z.Fuss" Halbk. In 1931, the German Arm Weapons Agency began to research rocket technology. In 1941, the NbW 41 28/32cm rockets were the first rockets deployed to the front lines. These rockets could be launched from their simple launch frames. During WWII, the German army used the Sd. Kfz 251/1 as a mobile rocket launcher. The vehicle was equipped with five NbW 28cm rockets ad one NbW41 32cm rocket. Due to the destructive capability of these vehicles, the Sd. Kfz 251/1 was nicknamed "Stuka zu fuss" or "Ground Stuka", which referred to Luftwaffes Stuka dive-bomber.
25,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 Sd.Kfz.251/1 Ausf.D Halbkette (2)

Art.Nr.: 300032564 Art.bezeichnung: 1/48 Sd.Kfz.251/1 Ausf.D Halbkette (2) Of the many variables that take affect any conflict, supply and mobility are the most pressing.Germany realized this very early and developed a number of vehicles for this purpose,including the Sd.Kfz 251 half-track. This machine became the centerpiece of their mechanized corps throughout WWII. The half-track could drive on difficult terrain and could easily tow various kinds of trailers and cannons. The Ausf.D was designed for ease of production and various types were produced, including those equipped with wireless radios and gun turrets. However, the basic version was the troop carrier which seated 12and came armed with two MG42 machine guns. The half-track could be seen at every front and had an on-road top speed of 53km/h and a 300km operational range. Length: 126mm, Width: 48mm. As there were many variations of the Ausf.D, this 1/48 assembly kit model of the GermanMtl.SPW. Sd.kfz 251/1 Ausf.D Schutzenpanzerwagen depicts a personnel carrier. Parts such as the interior and undercarriage have been accurately reproduced with less parts for easy assembly. The included assembly type tracks have a realistic sag effect. A commander figure wearing a winter uniform and a soldier figure carrying a MG42 machinegun on his shoulders are included. (Total 2) Accessories such as the Panzerschreck, grenade cases, infantry equipment and so onare also included in this set. Three kinds of decals depicting Normandy and the Eastern front units are included.
29,49 €
inkl. Mwst. zuzüglich Versandkosten

1:48 US KPz M1A2 Abrams

Art.Nr.: 300032592 Artikelbezeichnung: 1:48 US KPz M1A2 Abrams This small-scale Military Miniature series model assembly kit recreates the formidable modern U.S. Main Battle Tank M1A2 Abrams. The Abrams has been around since the early 1980s, with constant upgrades to ensure that it stays at the cutting edge of military technology. M1A2s were introduced from 1992, developed to be chock-full of front-line technology and bring the M1 into the digital age. They featured depleted uranium armor, a modified commander’s cupola, and more, and saw action in the conflict in Iraq in 2003.
31,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 US M4A3E8 Sherman Easy Eight

Art.Nr.: 300032595 Artikelbezeichnung: 1:48 US M4A3E8 Sherman Easy Eight • This is a 1/48 scale plastic model assembly kit. Length: 156mm. width: 62mm. • Aside from accessories, this is a completely new tooling. • In-depth surveys of actual vehicles provided the inspiration for this highly accurate kit in compact scale. • Slide molded parts artfully capture different surface textures of cast turret and welded upper hull panels. • Wide, single-pin T66 tracks are assembly type with one-piece straight sections. • Four hull weights give the model an authentically weighty feel. • Comes with a commander torso figure and 2 marking options (given below). • Option A: 5th Armored Division, Germany, April 1945 • Option B: 4th Armored Division, Bastogne, Belgium, January 1945
25,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 US P-51B Mustang North Americ.

Art.Nr.: 300061042 Artikelbezeichnung: 1:48 US P-51B Mustang North Americ. About the North American P-51B Mustang The Allison engine powered P-51A Apache, was derived from the original RAF Mustang 1 ground attack and photo reconnaissance aircraft. Long before anyone had even heard of a Mustang, the plan to put a Rolls Royce Merlin engine into the airframe had started. The Merlin was powering some of the best warplanes in England; the Hurricane, Spitfire and the Avro Lancaster bomber. To develop a new engine for the P-51 would take considerable time, which the allies did not have. In September 1940, the Packard Motor Company of the U.S. began license production of the Merlin V-1650-1 engine in Detroit, Michigan. With a new supercharger drive, a new V-1650-3 was mated to the first P-51B. Both the U.S. and England started the Merlin engine modification idea almost simultaneously. 10 airframes were modified in the U.S. with the Merlin and these became the basis for the most successful fighter series of the war. Flying for the first time on 30 November 1942, the XP-51B was soon modified with a larger coolant radiator scoop, which actually increased its top speed by 50mph and gave it a higher ceiling by 10,000 ft. The addition of an 85 gallon fuel tank behind the seat increased the P-51B's already excellent range, and it could now escort the bombers all the way to the target and back. P-51B Mustangs began arriving in England in September 1943 with the first Mustangs going to the 3354th fighter group at Boxted, England, and ended the war with the most air to air victories. A total of 3788 P-51B's were produced.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
27,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 US P-51D Mustang North American

Art.Nr.: 300061040 Artikelbezeichnung: 1:48 US P-51D Mustang North American About the North American P-51D Mustang 8th AF In April 1940, drawings were sketched in a New York City hotel room for a new fighter aircraft for the British purchasing Commission. This fighter, the North American NA73X, became one of the best fighter aircraft in the U.S. Army Airforce during World War II, and is known as the P-51 Mustang. Of the several variations of this famous fighter, the P-51D is generally accepted as the definitive Mustang and was the first production version with the "Bubble" canopy. More "D" model Mustangs were built than all other Mustang variants combined, with a total of 9,603 coming off production lines. 45 squadrons of the famed U.S. 8th Airforce, stationed in England were equipped with the P-51D, which could now escort and protect the heavy bombers all the way to and from targets on the European continent. There were several major changes that set the "D" apart form earlier Mustangs. One was the change from four .50 caliber machine guns to six, three in each wing. Another was to mount the guns upright which helped to eliminate a jamming tendency that occurred in the four gun system. Ammunition was increased to 400 rounds per inboard gun, and 270 rounds for each of the other four. Underwing pylons were strengthened to carry the 110 or 165 gallon auxiliary drop tanks or 1,000 lb bomb. P-51D Mustangs went to fight in the later Korean conflict and it last flew combat in 1956 in the deserts to the Middle East, when Israel used Spitfires, Messerschimitts and Mustangs together in the Mid East conflict.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
27,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 US Re. P-47D Thunderb. Razorback

Art.Nr.: 300061086 Art.bezeichnung: 1:48 US Re. P-47D Thunderb. Razorback In 1943, the 8th Air Force was launching raids on Germany with its B17 and B24 from England. The aim was to destroy German main production factories. Unfortunately, losses during theses missions were very heavy and it became urgent to develop a fighter able to escort the bombers over enemy soil. The limited ranges of the Spitfire and P-38 Lightning did not make these fighters able to go further than Paris, leaving the bombers alone to fend for themselves for the rest of the flight. With the development of the P-47, this problem was overcome. The P-47 was the first single-seated fighter to be equipped with a supercharger, allowing it to fly at the same high altitude as the bombers. This high-flying fighter was armed with eight 12.7mm machineguns that proved very useful in the intense fighting that occurred in the European skies. Equipped with drop tanks for longer range, the P-47D was then able to escort the bombers all the way to the German border. The Thunderbolt also allowed many Allied pilots to become Aces. Bomber crews plagued day after day by intensive German interceptions, would remark that the presence of the P-47 was of great help.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
45,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 US Rep. P-47D Thunderbolt Bubblet

Art.Nr.: 300061090 Artikelbezeichnung: 1:48 US Rep. P-47D Thunderbolt Bubblet Er war mit einem R-2800-59 Mototr ausgestattet, der eine Wassereinspritzung besaß und damit im Notfall beim Kampfeinsatz bis zu 2.300 PS leisten konnte. Führungsschächte seitlich und unterhalb im Rumpf zum Anschluss des Turboladers, welcher hinter dem Pilotensitz eingebaut war, trugen zum wuchtigen Aussehen des Flugzeugs bei.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
45,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 US Vought F4U-1A Corsair

Art.Nr.: 300061070 Artikelbezeichnung: 1:48 US Vought F4U-1A Corsair About the Vought F4U-1A Corsair After enduring heavy losses to the Japanese Navy's Zero fighters in the early stages of the Pacific War, the U.S. Navy became focused on developing new fighters capable of turning the tides of aerial combat. Among those fighters was the Corsair, first developed to be a high speed, carrier borne aircraft. Built around the new Pratt & Whitney R-2800 2000hp engine, and turning the largest propeller ever attached to a fighter plane (4m dia.), this gull-winged wonder was destined to be a success. In June 1942, the F4U-1 production models made their maiden flight. However, due to their restricted forward field of view, and because of a propeller wash effect caused them to stall left wing first during low speed landings, they first were used as land based fighters. Succeeding the F4U-1 in the summer of 1943 was the F4U-1A, which was equipped with an extended rear wheel landing gear shaft, a slightly modified glazed canopy, and a small triangular strip of metal bolted to the right leading edge of the wing to equalize the stall and avoid the roll to the left at touch-down. Despite these improvements, the new F6F Hell Cat was adopted as the main carrier-borne aircraft, and the first combat Corsairs became relegated to land based US Marine squadrons in the South Pacific. Major Boyington and 2nd Lieutenant Hanson of the U.S. Marines, Lt. Kepford of the Navy and other ace-pilots, bravely flew the F4U-1A into fierce air-combats, overpowering the Japanese Zero fighters with tremendous top speed and six 12.7mm heavy machine guns.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
27,49 €
inkl. Mwst. zuzüglich Versandkosten

1:48 US WWII 2,5to 6x6 Flugfeld Tankw(2)

Art.Nr.: 300032579 Art.bezeichnung: 1:48 US 2,5to 6x6 Flugfeld Tankwagen (2) The model US Airfield Fuel Truck - 2 1/2 Ton 6x6 in 1/48 scale has a length of about 107 mm. What better subject to compliment your 1/48 scale diorama than this U.S. airfield fuel truck model. The model is a modification of Item 32548 US 2.5 Ton 6x6 Cargo Truck and depicts a fuel truck typical of those that would have served during WWII.
26,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 USN Douglas A1-H Skyraider

Art.Nr.: 300061058 Artikelbezeichnung: 1:48 USN Douglas A1-H Skyraider About Douglas A-1H Skyraider U.S. Navy During 1943 the U.S. Bureau of Aeronautics considered to combine the tasks of torpedo bomber and dive-bomber into one. Several aircraft manufacturers, such as Douglas and Martin, were requested to develop a large, single-seat attack aircraft. According to the requirement, Douglas Skyraider, was developed by Douglas Aircraft Company, Inc. The development was started in early July 1944, and all night efforts of engineers made the first prototype's first flight possible already on March 18, 1945. Despite the short period of the development, flight trials proved the airframe's flight characteristics satisfactory and the aircraft was rated very highly. In May 1945 a letter of intent for 598 production was signed. The name "Skyraider" was officially approved for the aircraft in February of the following year, and the distribution to units was started at the end of the same year. The Skyraider was powered by Wright R3350 radial engine yielding 2,800 horse power and equipped with three large dive brakes on the fuselage. The Skyraider had a number of types, from the AD-1 to AD-7, recording grand total number of production of more than 3,000. Among them, AD-6 was the most produced variant. The AD designation for the Skyraider was changed in 1962, and the AD-6 became the A-1H. Noted for its durability and a large capacity for external stores, the Skyraider was well liked by its pilots and crewmen.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
38,49 €
inkl. Mwst. zuzüglich Versandkosten

1:48 WWII Brit. Panzerspähwagen Dingo II

Art.Nr.: 300032581 Art.bezeichnung: 1:48 Brit. Panzerspähwagen Dingo II This British armored scout car boasted enviable maneuverability and armor up to 30mm thick on its compact hull. Often referred to by its nickname of "Dingo", delivery of the Mk.I variant began in 1939; the later Mk.II featured various modifications, including an overhaul of the steering system. All told, more than 6,600 "Dingoes" were manufactured until 1945, serving in a range of locations in both reconnaissance and command car roles. About the Model This is a 1/48 scale plastic model assembly kit of the "Dingo" Mk.II. - Length: 69mm, width: 37mm. - The lightweight and compact form with distinctive flat panels is authentically recreated. - The model can be assembled with folding roof in open or closed position. - Suspension is realistically depicted with intuitive parts makeup. - Commander and driver figure are included in realistic action pose. - Contains one set of markings to recreate a vehicle in combat in Europe.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
15,89 €
inkl. Mwst. zuzüglich Versandkosten

1:48 WWII Brit.Kl.Dienstwagen 10PS

Art.Nr.: 300032562 Art.bezeichnung: 1:48 Brit. Kl. Dienstwagen 10PS Tilly was the name given to British Small Staff Cars coming from the word "Utility". These Tilly vehicles were produced in large numbers for British and Allied forces during WWII from civilian car designs. They were severely underpowered, but served with distinction and stayed in production throughout WWII and could be seen on every front. This British Staff Car was powered by a four cylinder 22-kW engine derived from a 10 HP commercial saloon.
17,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 WWII Diorama-Set Fässer&Kanister

Art.Nr.: 300032510 Artikelbezeichnung: 1:48 WWII Diorama-Set Fässer&Kanister Originally used by the Germans, Jerry cans Ewere soon used by the Allies as well to transport fuel and water. Set includes drum cans, Jerry cans, bags and other equipment for use with 1/48 MMV series models. Comes with both Allied and German versions.
11,19 €
inkl. Mwst. zuzüglich Versandkosten

1:48 WWII Diorama-Set Mauern&Sandsäcke

Art.Nr.: 300032508 Artikelbezeichnung: 1:48 WWII Diorama-Set Mauern&Sandsäcke Ziegelmauer, Sandsack und Barrikade Bausatz.
13,79 €
inkl. Mwst. zuzüglich Versandkosten

1:48 WWII Dt. 20mm Flakvierling 38 (4)

Art.Nr.: 300032554 Artikelbezeichnung: 1:48 WWII Dt. 20mm Flakvierling 38 (4) About the Flakvierling 38 Originally developed as a light anti-aircraft weapon for the Kriegs marine, the German army also adopted the 20mm cannon for use on land and was widely-used throughout WWII. To compensate for the cannons low rate of fire, 4 of these cannons were mounted together to create the Flakvierling 38. The mount featured collapsible seats, ammo cartridge racks, a three-legged base, and could be rotated via hand wheels, with the guns themselves fired via two foot pedals,each of which controlled a pair of diametrically opposed cannons. In basic form, the Flakvierling38 was loaded onto a 2-wheeled mount for towing to deployment points, but it was also fitted onto halftracks, tank chassis, ships, barges, and trains to provide close-range air defense against Allied fighter-bombers. About the Model High-quality 1/48 scale assembly model kit of the German Flakvierling 38 anti-aircraft gun. Quad-20mm cannons are linked to gunsight. Guns can be freely elevated/depressed and gun pedestal can be rotated to enable various firing positions. Parts are included for the trailer, enabling the gun to be towed by 1/48 scale vehicles such as ITEM 32534 6X4 Krupp Protze (Kfz.70). 4 figures in realistic poses as well as detailed accessories such as ammunition boxes and magazines are included as well. Excellent as a stand-alone diorama piece or as a component in larger displays
19,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 WWII Dt. F.W. Fw190 F-8/9 m.Belad.

Art.Nr.: 300061104 Art.bezeichnung: 1:48 WWII Dt. F.W. Fw190 F-8/9 m.Belad. In the latter half of WWII, the Luftwaffe Focke-Wulf Fw190 F series were the main aircraft used for air-to-ground assaults. The F-8, which entered the fray from the spring of 1944, was based on the A-8 aircraft and had the largest production numbers among the F series variants. The F-9 which had a superior engine output was also soon put into action. Both Fw190 F-8 and F-9 aircraft fought hard against the ever increasing numbers of Allied fighters up until the end of the war.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
39,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 WWII Dt. Fieseler FIL156C Storch

Art.Nr.: 300061100 Artikelbezeichnung: 1:48 WWII Dt. Fieseler FIL156C Storch About the Fi 156 Storch Produced to meet a Luftwaffe requirement for a new liaison aircraft, the Fi 156 Storch was a light aircraft that had amazing STOL (Short Take-Off and Landing) capabilities. The design incorporated such practical features as folding wings, which allowed it to be easily transported, and landing gear shock absorbers that allowed it to land on rough surfaces. It was used in a variety of roles, including liaison, tactical reconnaissance, and air ambulance, and it was the aircraft that was involved in the daring rescue of Italian dictator Benito Mussolini. Field Marshal Erwin Rommel was also known to make heavy use of his Fi 156 for battlefield reconnaissance in North Africa. About the Model •Highly-detailed 1/48 scale assembly kit model of the Fieseler Fi 156 Storch. •Kit includes parts to replicate various versions of the Fi 156C, including fuel tank, skis, and 3 different types of canopies. •Clear canopy sides have been molded together with the fuselage halves for more realistic construction. •Important structural sections such as the wing spar and the landing gear struts are made from metal parts for enhanced realism and strength. •Includes 1 pilot and 1 commander figure. •Precision photo-etched parts such as cockpit panels, cockpit frame, and front seat also included.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
77,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 WWII Dt. Jagdpanzer Marder III M

Art.Nr.: 300032568 Art.bezeichnung: 1:48 Dt. Jagdpanzer Marder III M The Marder III series tank was designed using the chassis of the obsolete 38(t) tank made by the Czech company CKD. This tank destroyer was developed to counter the Russian T-34 and KV-1 tanks. The initial version of the Marder was armed with the PaK 36(r) 7.62cm anti-tank gun. Addition versions of the Marder were created based on the 38(t) tank. The series culminated with the development of the Marder III M, which differed from the earlier models. The Marder III moved the engine to the center of the tank and the fighting compartment to the rear of the vehicle. This revision lowered the profile of the crew compartment allowing for additional armor plates for protection. Between May 1943 and May 1944, 942 Ausf. M tanks were produced. About the model Scale 1/48 Assembly kit Photo-etch parts Not included Decals included Special feature 1 The Marder's combat compartment has been recreated in superb detail. .
24,49 €
inkl. Mwst. zuzüglich Versandkosten

1:48 WWII Dt. Kettenkrad m.Goliath

Art.Nr.: 300032502 Artikelbezeichnung: 1:48 WWII Dt. Kettenkrad m.Goliath Kettenkraftrad: Ein einzigartiges Halbketten-Motorrad als leichte Zugmaschine mit Infanterie-Karren. Sein Motor ist ein 4-Zylinder 1.478cm³ Opel-Olympia Motor mit 36 PS. Goliath Zerstörungs-Fahrzeug: ein ferngesteuertes selbst-explodierendes Fahrzeug.
17,49 €
inkl. Mwst. zuzüglich Versandkosten

1:48 WWII Dt. Kettkrad m.Starthilfegerät

Art.Nr.: 300032533 Artikelbezeichnung: 1:48 WWII Dt. Kettkrad m.Starthilfegerät Die Flugzeug-Energieversorgungs-Einheit: Der "Anlasswagen" wurde engesetzt zum Anlassen der Flugzeugen, wodurch die Lebensdauer der Batterien verlängert wurde. Das Kettenkraftrad: Ein einzigartiges Halbketten-Motorrad als leichte Zugmaschine.
21,49 €
inkl. Mwst. zuzüglich Versandkosten

1:48 WWII Dt. Kübelw.Typ82 Pkw.K1 Afrika

Art.Nr.: 300032503 Art.bezeichnung: 1:48 Dt. Kübelw.Typ82 Pkw.K1 Afrika One of the most widely used WWII vehicles, the Kübelwagen Type 82 featured a lightweight monocoque body, four wheel independent torsion bar suspension and a 23.5hp air-cooled 4 cylinder 985cc engine. Based on Dr. Ferdinand Porsche's Volkswagen, the Type 82 possessed excellent maneuverability and handling, serving as a multi-purpose vehicle for the army as well as the Luftwaffe (air force). In total over 50,000 units were produced during WWII, with slight variations between models including shape of rear fender, under guard, turn signals and exhaust layout. The Kübelwagen was first deployed to the North Africa campaign in 1941, with a specialised Africa Corps version featuring balloon tires going into production from 1942. Designed to be more suited to desert conditions, the Africa Corps model was used during both the North Africa and Italian campaigns. Overall length: 79.5mm, overall width: 33.5mm Bonnet, short fender, balloon tires and other distinctive characteristics of the Africa-Corps Kübelwagen have all been authentically reproduced 1 driver and 1 pilot figure wearing shorts and rolled sleeve shirt included Decals for 5 different markings Perfect for diorama with German aircraft from the 1/48 Aircraft Series such as the Messerschmitt Bf109E-4/7 Trop
12,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 WWII Dt. Kübelwagen Typ 82 Pkw.K1

Art.Nr.: 300032501 Artikelbezeichnung: 1:48 WWII Dt. Kübelwagen Typ 82 Pkw.K1 Im November 1938 der Prototyp des Kübelwagens vorgestellt. Er verfügte über eine leicte, aber verwindungssteife Schalenkonstruktion mit einem Faltverdeck. Der hinten eingebaute, luftgekühlte 4-Zylinder Motor hatte einen Hubraum von 985cm³ und eine Leistung von 23,5 PS bei 3000 Umdrehungen, der das Auto auf 80km/h brachte.
17,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 WWII Dt. SdKfz.67 (6) mit 3,7cm PAK

Art.Nr.: 300032580 Artikelbezeichnung: 1:48 WWII Dt. SdKfz.67 (6) mit 3,7cm PAK In the lead-up to WWII, Germany started to transform civilian vehicles into military ones, and one of the subjects was a light 6-wheel truck which was mass-produced starting in 1933. This 1936 evolution of the truck had a 60hp flat four square cylinder engine that mustered 55hp and provided up to 70km/h. The truck was used for transporting personnel and light artillery, and it utilized 6x4 independent suspension with rear 4-wheel drive. The first mass-produced variant was the Kfz.69, which was designed to tow a 3.7cm Pak 35/36 anti-tank gun and carried a driver and 5-artillery crew. It was employed as standard equipment in anti-tank artillery divisions and was seen in action in locations such as France, Poland, the Balkans, and Russia. The Tamiya model faithfully captures all of the details of the full-size subject thanks to extensive research of surviving samples left over from the war. Scale: 1/35 Length: 182 mm
25,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 WWII Dt. Seitenwagengespann (2)

Art.Nr.: 300032578 Art.bezeichnung: 1:48 Dt. Seitenwagengespann (2) Add some more detail to your 1/48 scale dioramas with this scale model of a German motorcycle and side car. Side cars were paired with motorcycles by German forces in many areas of the WWII conflict, and their excellent off-road ability combined with the bike’s engine power made them a useful asset in transporting soldiers and equipment, some even being mounted with machine guns.
13,79 €
inkl. Mwst. zuzüglich Versandkosten

1:48 WWII Dt.Heinkel He162A-2 Salamander

Art.Nr.: 300061097 Artikelbezeichnung: 1/48 WWII Dt.Heinkel He162A-2 Salamander The Luftwaffe's Last Hope As the situation became more desperate for the German forces near the end of WWII, a call was made for a new inexpensive jet fighter that would be simple to produce and fly. In the amazingly short span of 3 months from drawing board to first flight of the prototype, Heinkel produced the small, sporty-looking He162. The lightweight fighter featured mainly wooden construction and was powered by a BMW003 turbojet, which made it the fastest jet fighter of WWII with its 838km/h top speed. Reaching combat units in late March 1945, the little fighter managed to record some combat successes despite the acute fuel and parts shortage. About the Model High-quality assembly kit display model of the He162 A-2 "Salamander" jet fighter. ★Length: 205mm, Width: 149mm ★Top-mounted BMW003 turbojet engine with parts for opened and closed engine bay covers to allow full display of internal details. ★Special dolly included to display the engine separate from the aircraft. ★Canopy can be posed in the open or closed positions, and the ejector seat is removeable. ★Includes 1 pilot figure and 4 types of markings.     Achtung! Nicht für Kinder unter 14 Jahren geeignet.
38,49 €
inkl. Mwst. zuzüglich Versandkosten

1:48 WWII Dt.Lkw Krupp Protze m.Fig.(8)

Article number: 300032534 Product: 1:48 WWII Ger.Truck Krupp Protze w/8Fig. One of the fan-favorites in 1/35 scale, the German Krupp Protze 6-wheeled truck finally joins the 1/48 scale MM Series. Every characteristic of this truck, such as its low-profile bonnet, infantry carrier on rear and double wishbone suspension, has been realistically reproduced. Set also includes driver and infantry passenger figures to heighten realism and atmosphere. The 1/48 MM Series offers not just tanks, but also a rich variety of auxiliary and support vehicles for endless diorama possibilities. This vehicle was popularly known as the "Boxer" because it had an air-cooled flat-four square engine. This in turn allowed a flat sloping engine cover of quite unmistakable shape which also gave excellent forward visibility and a low silhouette. The Krupp "Boxer" was quite ubiquitous in application and the chassis carried body work for a considerable number of different roles. Aside from its air-cooled engine, the "Boxer" also had an independent suspension system, differing from the conventional springing systems of other six-wheelers in German service. 1/48 assembly model kit of the German 6x4 Truck Krupp Protze (Kfz.70). Overall length 107.5mm. Die-cast under panel adds weight and realism. Separately molded suspension spring for extra realism. Includes accessories such as Jerry cans, rifles and jack. Comes with 8 figures, including driver and passengers.
24,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 WWII Dt.Panzer II Ausf.A/B/C F.C.

Art.Nr.: 300032570 Art.bezeichnung: 1:48 Dt. Panzer II Ausf.A/B/C F.C. In the mid 1930s, the German military pushed the production of tanks. The Panzer I designed as a training tank, did not have the adequate performance, so a light tank was needed to full the gap until the Panzer III could be introduced. Therefore, the German Ordnance Department issued a request for a new training tank that could be used for combat. In the end, MAN was chosen in 1934 to produce the Panzer II, a compact 4.8m long, 2.2m wide design with a three man crew. The 8.9 ton tank featured a 2cm Kwk 30 L/55 cannon and 7.92mm machine gun in the turret, 15mm armor protection for turret and hull front, leaf spring suspension, and a 140hp Maybach HL 62 TRM engine matched with a ZF SSG46 transmission, which gave it a 40km/h top speed. The Ausf. A was produced from 1937, followed by the Ausf. B and C, which were difficult to distinguish from each other visually. About 1,100 Panzer tanks were produced by April 1940, and due to delays with the Panzer III, they were immediately issued as the Panzer divisions' main tank for the invasion of Poland in September 1939. Based on lessons learned on the battlefields of Poland and, in May 1940, France, improvements such as extra armor and a turret cupola were added, and the Panzer II went on to serve in North Africa and Russia in front line and liaison and reconnaissance duties until the end of 1943. Afterwards, they were used to police occupied territories and the chassis was also adapted for use as the basis for various self-propelled gun designs.
26,49 €
inkl. Mwst. zuzüglich Versandkosten

1:48 WWII Dt.Schw.Pz.Jagdtiger Früh.Pr.

Art.Nr.: 30003269 Art.bezeichnung: 1:48 Dt. Schw.Pz. Jagdtiger Frühe Prod. 1943 saw the production of the worlds heaviest and most powerful tank of its time, the Jagdtiger. Pro-duced by Henschel, it was based on the King Tiger's chassis and featured a long barreled 12.8cm gun which showed great offensive capabilities being able to knock out Allied tanks from a great distances. Along with its new design, the large sized fixed fighting compartment was given a 250mm thick front defensive armament which was unique to this tank. First appearing at the Ardennes offensive in December 1944, the Jagdtiger mostly fought against Allied forces in Western Germany from January 1945. Up until April 1945, more than 80 Jagdtigers and another ten with "Porsche turrets" were produced.
33,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 WWII Dt.Sd.Kfz.181 Tiger I Ausf.E

Art.Nr.: 300032504 Artikelbezeichnung: 1:48 WWII Dt.Sd.Kfz.181 Tiger I Ausf.E Der deutsche Panzer Tiger I wurde im Jahre 1942 konstruktioniert. Er wurde zuerst an der Nordafrika-Front eingesetzt. Der Tiger I hatte eine Panzerungsstärke von 100mm an der Stirnseite und 80mm an beiden Seiten, die Hauptkanone war die äußerst starke88mm KwK 36 L/56. Das Triebwerk, Maybach`s HL 210 P45, leistete 650 PS.
34,49 €
inkl. Mwst. zuzüglich Versandkosten

1:48 WWII Figuren-Set Dt.Infa.Manöv.(15)

Art.Nr.: 300032530 Art.bezeichnung: 1:48 Figuren-Set Dt. Infa. Manöver (15) Our latest 1/48 scale figure set features WWII German soldiers in relaxed poses, standing, walking, wearing field caps and with weapons shouldered. Also includes figures depicting tank crew at rest. 2 all-new officer figures and military policeman, which are available now for the first time in any scale, are also included. This set is perfect for modeling non-combat scenes and dioramas of life behind-the-lines. Set includes 7 machine gun crew on maneuvers, 2 standing infantry, 3 tank crew, 2 officers and 1 military policeman for a total of 15 figures. Infantry figures feature realistic M43 field uniforms. Includes separately molded weapons and equipment such as machine gun tripod mount.
11,79 €
inkl. Mwst. zuzüglich Versandkosten

1:48 WWII IJN Komatsu G40 Schubraupe(1)

Art.Nr.: 300032565 Art.bezeichnung: 1:48 WWII IJN Komatsu G40 Schubraupe(1) During WWII, Japanese forces developed the Komatsu G40 Bulldozer to aid in airfield construction. This was the first bulldozer manufactured by the Japanese. One hundred and forty-eight G40 bulldozers were built throughout the war. The G40 was sent to the northern and southern fronts, but due to the war few managed to reach their assigned airfields. Only one G40 survived the war, and can be seen at the Komatsu Techo Center in Shizuka, Japan. The Japan Society of Mechanical Engineers recognized the vehicle in 2007 as a Mechanical Engineering Heritage item.
21,49 €
inkl. Mwst. zuzüglich Versandkosten

1:48 WWII Volkswagen Typ82E Dienstwagen

Art.Nr.: 300032531 Artikelbezeichnung: 1:48 WWII Volkswagen Typ82E Dienstwagen Die markante, rund gehaltene Karosserie, für welche das Auto den Spitznamen "Käfer" erhielt, wurde von Porsche`s Chefingenieur Erwin Komenda 1938 entworfen. Der Volkswagen Typ 82Ewurde von vielen Offizieren des Deutschen Militärs und der Regierung als Stabsauto benutzt.
17,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 Zgm. SS-100 m. 88mm Flak37 Set

Art.Nr.: 300037027 Art.bezeichnung: 1:48 Zgm. SS-100 m. 88mm Flak37 Set The SS-100 was a heavy tractor used by German forces from the mid-1930s, originally a commercial design but also effective in military service throughout WWII thanks to an ability to haul up to 20 tons. Among a wealth of candidates, one of its passengers really stands out - the mighty 88mm gun, which was used against Allied forces with devastating effect. The Flak37 was a powerful 1937 variant, with sights updated from predecessors, and a large shield added from 1940. About the Model ★This is a 1/48 scale plastic model assembly kit set. SS-100 length: 114mm; 88m gun length (towed): 169mm. ★The sturdy SS-100 form is recreated with aplomb. ★Integrated cabin parts make for a fuss-free, accurate assembly. ★The complex Flak37 88mm gun is captured with realism. ★Transport wagon is also depicted. ★Comes with five figures and three marking options. *88mm gun parts are a product of Italeri.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
40,99 €
inkl. Mwst. zuzüglich Versandkosten

1:6 Honda CB750F 1979

Art.Nr.: 300016020 Artikelbezeichnung: 1:6 Honda CB750F 1979 About the Honda CB750F The Honda CB750F Motorcycle first appeared on the Japanese market in June 1979 and was shortly the best seller in the 750 motorcycle class. Just ten years prior to their CB750F, Honda opened the field of multi-cylinder, large-bore bikes with the now famous four cylinder CB750. Honda had extensively tested the multi-cylinder concept and won several Grand Prix motorcycle races, and the CB750 was based upon these experiences. The engines worked flawlessly and provided very smooth power with almost no vibration, and so shocked the industry, that soon many of the famous makers also produced four cylinder large cubic motorcycles. Honda, of course, held the number one position in sales for many years, but then Kawasaki released their "Z" series DOHC 750 bikes, and took over the number one position, relegating Honda to 2nd place. Honda, however, did not take this set back for long, and continued to improve their engines, and in 1979 released a CB 750K DOHC with four valves per cylinder, a powerful 68hp, and completely new body styling. It was not long before Honda was again number one! The CB750F, released in June 1979 was styled after the very popular European Honda CB900F, which had been copied from their racing RCB bike. This styling was new to stock motorcycles of the world. The low positioned handle bars and rear positioned foot rests, allow a "slouched" riding position and this style is what set the standard for the eighties. The CB750F is powered by a 4 cylinder DOHC 748cc engine with 4 valves per cylinder, and the 1981 version produces 70 brake horsepower. The bike has a double cradle frame of welded steel tubing, 37mm air front forks with equalizer and 30 way adjustable rear shocks with variable hydraulic dampening. It is equipped with a maintenance-free transistorized pointless inductive ignition system and braking is accomplished with a dual caliper double disc front brake and a large single disc at the rear. A n
99,99 €
inkl. Mwst. zuzüglich Versandkosten

1:6 HONDA CRF 1000L Africa Twin Enduro

Art.Nr.: 300016042 Artikelbezeichnung: 1:6 HONDA CRF 1000L Africa Twin Enduro TAMIYA präsentiert die Honda CRF1000L Africa Twin. Ein modernes Adventurer-Touren-Motorrad, inspiriert vom legendären 4-maligen Paris-Dakar-Champion-Offroad-Bike. Die CRF1000L wurde im Jahr 2015 erstmals vorgestellt und verfügt über einen 998ccm Parallel-Twin-Motor mit 92 PS. Weitere Highlights sind beispielsweise ein Doppelkupplungsgetriebe, wählbare Drehmomentsteuerung für wenig griffigere Oberflächen und ABS-Bremsen. Ein super detaillierter Großmodell-Bausatz für anspruchsvolle Modellbau-Enthusiasten!   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
224,99 €
inkl. Mwst. zuzüglich Versandkosten

1:6 Honda Gorilla Spring Collection

Art.Nr.: 300016031 Artikelbezeichnung: 1:6 Honda Gorilla Spring Collection Im August 1978 brachte Honda Gorilla auf dem Markt. Das Herz des Motorrads ist ein luftgekühlter 4-Takt OHC Einzylinder mit 49cm³. Er Schafft 3,1 PS bei 7.500 Umdrehungen pro Minute und 3,2 Nm bei 6.000 Umdrehungen pro Minute.  
61,99 €
inkl. Mwst. zuzüglich Versandkosten

1:6 Motorradkette (Einzelglieder) Af.Tw.

Art.Nr.: 300012674 Artikelbezeichnung: 1:6 Motorradkette (Einzelglieder) Af.Tw. This assembly-type 1/6 scale chain is designed to go with the 1/6 scale Honda CRF1000L Africa Twin model kit. It promises to add an extra level of unbelievable detail to your masterpiece. •Includes individual assembly chain links consisting of individual plastic plates and metal spacers. •The completed chain will fit neatly onto the drive sprocket in Item 16042 Honda CRF1000L Africa Twin. •Includes a handy jig which aids construction. •Parts included in Item 16042 allow adjustment of the chain tension when it is fitted to the model. .
42,99 €
inkl. Mwst. zuzüglich Versandkosten

1:6 Suzuki GSX1100S Katana 1980

Art.Nr.: 300016025 Artikelbezeichnung: 1:6 Suzuki GSX1100S Katana 1980 One of the most famous motorcycle shows in the world, is held every two years in Cologne West Germany, and the 1980 show is sure to stand out as one of the most unforgettable. One reason was that Honda released their CX500 turbo for the first time, and the second is that Suzuki"s GSX1100S "Katana" (Japanese for sword) was unveiled. The Honda CX500 attracted attention for its advanced engine techniques and the Katana for its advanced and aggressive body styling, which broke from common traditional motorcycle styling. Although the Katana GSX1100S styling impressed the many thousands of viewers, almost everybody thought that it was just for show and the production model would be quite different. During the summer of 1981, Suzuki released the production Katana with almost exactly the same body styling seen at the Cologne show, with subtle improvements in the engine and running gear. The body styling is from the genius of Mr. Hans A. Muth of West Germany, who spent much time ensuring driver comfort in his design, and which proved out in many wind tunnel tests. The entire styling was derived from research on the best drivers position, and the rearward placed backsteps and unique tank styling were not done just for the pleasing jet age appearance. Large capacity fuel tank and small fairing were blended together for the best airflow around the rider and the bike. Although the bike is most noticable for its styling, every part in it is quality. Engine is an air-cooled, parallel 4 of 1075cc, using 16 valves. With the unique Suzuki TSCC (Twin Swirl Combustion Chamber) in the engine, it puts out 111 hp. This tremendous power transmits into a road speed of 230 k/h and its unique body styling deeps it stable even at these high speeds. Suzuki is shipping a 1000cc Katana GSX1000S tot he American market, and also a 750cc version to the European market as well. Requests from Japanese enthusiasts prompted Suzuki to also market a 750cc Katana GSX750S to their market
99,99 €
inkl. Mwst. zuzüglich Versandkosten

1:6/1:12/1:24 0,50mm Kabel/Schlauch 2m

Art.Nr.: 300012675 Artikelbezeichnung: 1:6/1:12/1:24 0,50mm Kabel/Schlauch 2m This cable features a wire core in vinyl casing. It’s great for reproducing the various piping and cables which appear on Tamiya's highly realistic scale car and motorcycle models. The wire core ensures greater flexibility and durability than standard hollow tubing in Tamiya model kits. • Length: 2 meters. • Please note that using these cables will require the making of holes in the subject model. .
3,99 €
inkl. Mwst. zuzüglich Versandkosten

1:6/1:12/1:24 0,65mm Kabel/Schlauch 2m

Art.Nr.: 300012676 Artikelbezeichnung: 1:6/1:12/1:24 0,65mm Kabel/Schlauch 2m This cable features a wire core in vinyl casing. It’s great for reproducing the various piping and cables which appear on Tamiya's highly realistic scale car and motorcycle models. The wire core ensures greater flexibility and durability than standard hollow tubing in Tamiya model kits. • Length: 2 meters. • Please note that using these cables will require the making of holes in the subject model. .
3,99 €
inkl. Mwst. zuzüglich Versandkosten

1:6/1:12/1:24 0,80mm Kabel/Schlauch 2m

Art.Nr.: 300012677 Artikelbezeichnung: 1:6/1:12/1:24 0,80mm Kabel/Schlauch 2m This cable features a wire core in vinyl casing. It’s great for reproducing the various piping and cables which appear on Tamiya's highly realistic scale car and motorcycle models. The wire core ensures greater flexibility and durability than standard hollow tubing in Tamiya model kits. • Length: 2 meters. • Please note that using these cables will require the making of holes in the subject model. .
3,99 €
inkl. Mwst. zuzüglich Versandkosten

1:6/1:12/1:24 1,00mm Kabel/Schlauch 2m

Art.Nr.: 300012678 Artikelbezeichnung: 1:6/1:12/1:24 1,00mm Kabel/Schlauch 2m This cable features a wire core in vinyl casing. It’s great for reproducing the various piping and cables which appear on Tamiya's highly realistic scale car and motorcycle models. The wire core ensures greater flexibility and durability than standard hollow tubing in Tamiya model kits. • Length: 2 meters. • Please note that using these cables will require the making of holes in the subject model. .
3,99 €
inkl. Mwst. zuzüglich Versandkosten

1:6/1:12/1:24 1,2x2,6mm Gewebeschl. 1m

Art.Nr.: 300012663 Art.bezeichnung: 1:6/1:12/1:24 1,2x2,6mm Gewebeschl. 1m Attention static car and motorcycle modellers! These products are perfect for recreating braided hoses which are commonly used as brake lines, fuel pipes etc. on real life vehicles. The surface texture is artfully depicted using interior rubber tubing wrapped with thread. Simply attach to your model to raise the detail even further! .
5,69 €
inkl. Mwst. zuzüglich Versandkosten

1:6/1:12/1:24 Carbon Dekor Glatt/Ex.Fein

Art.Nr.: 300012680 Artikelbezeichnung: 1:6/1:12/1:24 Carbon Dekor Glatt/Ex.Fein Carbon weave decals are a great way to enhance your models level of realism. Many of Tamiya’s car and motorcycle subjects have parts that depict raw carbon parts, such as winglets, spoilers, and body panels. With Tamiya carbon fiber decal sheets, you can easily replicate these parts on your model with relative ease. Simply cut to the size and shape of the section that you want to cover, and apply. When used in conjunction with Tamiya MARK FIT and MARK FIT STRONG (Tamiya’s decal setting solution solvents), forming the decal sheet to curved surfaces make application even easier. • Sheet dimension: 130mm x 190mm x1. • Sheet features no pre-marked shapes and can be cut to desired shape and size. • Great for use on static models of bikes, cars and more from 1/6 to 1/24 scale. .
7,59 €
inkl. Mwst. zuzüglich Versandkosten

1:6/1:12/1:24 Carbon Dekor Glatt/Fein

Art.Nr.: 300012679 Artikelbezeichnung: 1:6/1:12/1:24 Carbon Dekor Glatt/Fein Carbon weave decals are a great way to enhance your models level of realism. Many of Tamiya’s car and motorcycle subjects have parts that depict raw carbon parts, such as winglets, spoilers, and body panels. With Tamiya carbon fiber decal sheets, you can easily replicate these parts on your model with relative ease. Simply cut to the size and shape of the section that you want to cover, and apply. When used in conjunction with Tamiya MARK FIT and MARK FIT STRONG (Tamiya’s decal setting solution solvents), forming the decal sheet to curved surfaces make application even easier. • Sheet dimension: 130mm x 190mm x1. • Sheet features no pre-marked shapes and can be cut to desired shape and size. • Great for use on static models of bikes, cars and more from 1/6 to 1/24 scale. .
7,59 €
inkl. Mwst. zuzüglich Versandkosten

1:72 Bf-109 G-6 Messerschmitt

Art.Nr.: 300060790 Art.bezeichnung: 1:72 Bf-109 G-6 Messerschmitt In great news for modelers in the compact 1/72 scale, the "Gustav" is to be released as a Tamiya kit! With over 30,000 produced, the Messerschmitt Bf109 is the most prolifically manufactured fighter in history; of its variants, the G-6 was the most numerous at 13,000 aircraft. In response to improving Allied foes in the air, Bf109 G aircraft had the more powerful DB605 engine, and from the G-6 were equipped with dual 13mm MG131 machine guns that required the distinctive bulges on either side of the cockpit cowling known as "Beule." Some were even given a 20mm cannon gondola under each wing for further improved firepower. The Bf109 G-6 was deployed on both the Western and Eastern fronts, in particular dominating Soviet adversaries as it continued in service through to the end of WWII. About the Model - This is a 1/72 scale plastic model assembly kit. - The striking, refined form of the G-6 variant Bf109 is captured, including depictions of the Beule bulges. - This product takes inspiration from the highly accurate 1/48 model (Item 61117). Please note that engine cowlings are depicted closed. - The cockpit is inserted after left and right fuselage halves have been put together. It has an accurate interior with streamlined assembly. - Canopy can be assembled in open or closed state. - Landing gear struts have a solid attachment point for accurate attachment angle and position. - Comes with optional drop tank parts. - 2 marking options are planned - JG51 (distinctive eye marking on the Beule) and JG54. Detaillierter Plastikmodellbausatzwith   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
23,99 €
inkl. Mwst. zuzüglich Versandkosten

1:72 De Havilland Mosquito FB Mk.IV

Art.Nr.: 300060747 Artikelbezeichnung: 1:72 De Havilland Mosquito FB Mk.IV The De Havilland "Mosquito" made of wood was designed based on "high-speed bomber shaking off fighter". The design of the Mosquito was got in shape in 1939. The De Havilland had experienced producing "DH88 Comet" made of wood before, therefore they paid attention that the surface of wooden wing could be finished smoothly and the amount of aluminum could be saved. Two of Rolls Royce Merlin engines were selected as the source of power and the wood was used as the material of this fuselage. The parts with the metal were only the parts of the periphery of the engine and the landing gear. At the first time, the Air Ministry was passive adopting the Mosquito because of wooden and no machine guns. However the Mosquito made a maiden flight with the maximum speed of 630km when the "Spitfire" had the maximum speed of 580km at those time. Therefore a lot of "Mosquito" were suddenly requested. After many types of the Mosquito were produced, Night-Fighter Mk. II armed with 7.7mm machine guns on its nose and A.I.Mk.IV radar made an appearance. This Mosquito brought its ability into full play in attacking an airfield and intercepting raiding bombers. Also Fighting Bomber Mk. VI armed with four 225kg bombs and eight of rocket bombs was arranged as the actual fighting in Mar. 1943. This type played havoc with theland forces, the battleships and the U-boat. Furthermore it was active in attacking the railroad and its bridge at Burmese front line, giving a blow to Japanese army. The mosquito's wooden structure was strong against being shot, therefore it held an established position from the pilots with the special mission. Detailierter Plastikmodellbausatz des Modells De Havilland Mosquito FB Mk.IV im Maßstab 1:72
21,49 €
inkl. Mwst. zuzüglich Versandkosten

1:72 F-16CJ Fighting Falcon m.Zurüsttei.

Art.Nr.: 300060788 Artikelbezeichnung: 1:72 F-16CJ Fighting Falcon m.Zurüsttei. This is the second release of the 1/72 scale F-16CJ [Block 50] Fighting Falcon (original Tamiya release: Item 60786) now with parts depicting underside equipment used on the aircraft! The versatile F-16 Fighting Falcon's adaptability to both air-to-air and air-to-ground missions makes it one of the cornerstones of the U.S. Air Force today. Block 50 evolutions of the aircraft were deployed from 1991, F-16CJ fighters being fitted with radar countermeasures. The aircraft's capabilities were extended yet further via the CCIP program, which gave night fighter functionality and more. Equipment depicted using new parts Centerline fuel tank Wing underside fuel tanks ECM counter measures pod AGM-88 HARM missiles AN/ASQ-213 HTS targeting pod AIM-120 AMRAAM missiles AIM-9M & -9X Sidewinder missiles AN/AAQ-33 Sniper XR pod   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
40,49 €
inkl. Mwst. zuzüglich Versandkosten

1:72 F-51D Mustang North American

Art.Nr.: 300060754 Artikelbezeichnung: 1:72 F-51D Mustang North American Sketched out in a New York city hotel in April 1940, the North American Aviation Corporation NA73X went on to become one of the best fighters to come out of World War 2. The U.S. Army Air Corps gave it the title of P (for Pursuit) 51, and it was named Mustang by the British. Of the several variations of the Mustang, the P-51D is considered the definitive version and was the first to have the bubble canopy. More "D" models were built than any other variant, with a total of 9,603 being produced. Armed with six .50 caliber machine guns, three in each wing, with 400 rounds for each inboard gun and 270 rounds for the other four, plus underwing pylons for auxiliary fuel tans or 1000lb bombs, the Mustang was a true fighter pilots airplane. At the conclusion of WW2, Mustangs were in operation all over the world, flying in several nations air forces. When the Korean conflict broke out, hundred of F (for fighters) 51's were in Japan awaiting scraping. Because they possessed too slow speed maneuverability that was absent in the new jets then entering service, the F-51 was ideal to work with Forward Air Controllers (FAC's) on the ground in Korea. The major drawback to this was the F-51's liquid cooled engine susceptibility to anti aircraft and small arms fire when attacking ground targets. This caused the Mustang to have the highest loss ratio of any aircraft in Korea. A total of 194 were lost in three years, with only 10 being downed in combat with other aircraft. Detailierter Plastikmodellbausatz des Modells F-51D Mustang North American im Maßstab 1:72
14,99 €
inkl. Mwst. zuzüglich Versandkosten

1:72 Focke Wulf Fw 190 A-3

Art.Nr.: 300060766 Artikelbezeichnung: 1:72 Focke Wulf Fw 190 A-3 Development of the FW190 series began in the Autumn of 1937, under a contract issued by the Reichsluftfahrtministerium (Air Ministry) for a single seat fighter to supplement the Messerschmitt Bf109. Two proposals were submitted by Kurt Tank, the technical director of the Focke-Wulf Flugzeugbau (aircraft factory). The proposal using the then new BMW 801 aircooled radial engine was chosen. This tough and powerful engine was placed in a robust airframe and provided superb handling, well balanced control, and brisk acceleration. It entered service in 1941, flying alongside the Bf 109 and it soon took control of air superiority over the English Channel. Establishing itself as a mainstay fighter of the Luftwaffe, it outperformed the contemporary Spitfire Mk.V's in almost every respect and maintained this advantage until the arrival of the Spitfire IX in July 1942. The Fw190 fighter underwent constant improvement throughout its life. The A-3 version used the improved BMW 801Dg engine that produced 1,700hp. Armament was increased from four to six guns, consisting of two rapid firing MG151's in the wing roots; two MG FF's outboard of the landing gear and two fuselage mounted MG 17 machine guns. Throughout WW2, many Luftwaffe squadrons allowed personal pilot markings and distinctive squadron insignia to be used, plus lower cowl, wing tip and rudder color additions to the original paint schemes. Detailierter Plastikmodellbausatz des Modells Focke Wulf Fw 190 A-3 im Maßstab 1:72
14,99 €
inkl. Mwst. zuzüglich Versandkosten

1:72 Focke Wulf Fw 190 D-9

Art.Nr.: 300060751 Artikelbezeichnung: 1:72 Focke Wulf Fw 190 D-9 Following the successful entry of the Focke-Wulf Fw190 A series of fighter aircraft over the English channel during the autumn of 1941, the German RLM requested a high altitude version to complement the fighter fleet, and three projects were started. The Fw 190B used the B.M.W. 801 turbo-supercharged radial engine and a pressurized cockpit, but very few of these were built. The Fw190C was powered by a 1,750hp Daimler Benz DB603A in-line engine, of which three prototypes were built. The third high altitude project was based on the Focke Wulf Fw190A airframe and powered by a Junkers engine. The fuselage was lengthened to accommodate the V-12 cylinder, liquid cooled, 1,750hp Jumo 213 engine, and made its initial flight during the winter of 1941-42, Five further prototypes were produced, plus a small batch of Fw190 D-0s were completed from standard production Fw 190A-7 airframes. These pre-production aircraft were followed by the Fq-190D-1's which had the increased area vertical fin and rudder. There were no Fq190 D-2 through D-8 designations. The Fw-190D9 began production in June 1944, with early versions having the flat topped canopy, and from W.Nr 210001 onwards having the Galland hood (blown canopy). It went into combat with the III/JG 54 "Grunherz" (Green Hearts) in September 1944, at Achmer, Germany, as top cover for the new Messerschmitt Me262 jet fighters then entering service. Detailierter Plastikmodellbausatz des Modells Focke Wulf Fw 190 D-9 im Maßstab 1:72
14,99 €
inkl. Mwst. zuzüglich Versandkosten

1:72 Kawanashi Shiden Type 11

Art.Nr.: 300060768 Artikelbezeichnung: 1:72 Kawanashi Shiden Type 11 Evolving from the Kawanishi N1K1 "Kyofu" floatplane, the Imperial Japanese Navy's N1K1-J Shiden had a unique pedigree amoung WW2 landplane fighters of the world. In January 1942, the Kawanishi Aircraft firm began adaptation of the Kyofu into a land based fighter, strictly as a private venture. This project was soon officially authorized under the designation N1K1-J, with the first prototype flying in December 1942. The airframe was basically the same as its predecessor, with main landing gear and tall wheel replacing the floats. In place of Kyofu's Mitsubihi Kasei engine, a more compact and powerful Nakajima Homare engine was installed. Excellent performance and superb maneuverability was achieved using this engine, however it brought about serious problems. In order to use all of the available power in the engine, a large diameter propeller was required. This required unusually long main landing gear legs, because of the midwing configuration. This caused difficulties in the landing gear retraction system. Kawansihi engineers managed to solve the problem by introducing telescopic main landing gear legs. The complex gear system and unreliability of the engine, plagued the N1K1-J throughout its career, until the introduction of the improved, low-wing N1K2-J Shiden-Kai. About 1,000 N1K1-J fighters were produced and were active around the Phillipine islands, Formosa, Okinawa and over the Japanese Island of Honshu. Detailierter Plastikmodellbausatz des Modells Kawanashi Shiden Type 11 im Maßstab 1:72
13,79 €
inkl. Mwst. zuzüglich Versandkosten

1:72 Ki-61-Id Hien

Art.Nr.: 300060789 Artikelbezeichnung: 1:72 Ki-61-Id Hien This scale plastic model kit accurately depicts the Kawasaki Ki-61-Id Hien. The Hien was officially adopted by the Imperial Japanese Army in 1943, and stood out among its Japanese aircraft contemporaries in the Pacific War on account of its liquid-cooled Ha-40 engine, slimline fuselage and long, elegant wing. A number of different variants were produced, among them the Ki-61-Id which featured a 20cm-elongated nose to house 20mm cannons, plus 12.7mm machine guns in the wing. In fact, with 1,360 units it was the most prolifically produced Hien variant; its superior performance at higher altitudes meant that it was often given the brief of taking on incoming U.S. B29 bombers in the skies around the home islands of Japan.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
22,99 €
inkl. Mwst. zuzüglich Versandkosten

1:72 ME-BF 109E-4/7 TRUP

Art.Nr.: 300060755 Artikelbezeichnung: 1:72 ME-BF 109E-4/7 TRUP During the first half of the Second World War, the Messerschmitt Bf109 E was the main fighter of the German airforce. The E-4 housed a 1,100hp Daimler Benz DB 601Aa engine and was armed with two 7.92mm machine guns on the nose, as well as a 20mm cannon on each wing. For some aircraft, bullet-proof glass was used to reinforce the front of the canopy. In addition, a 20mm canon, which ran through a tube in the propeller was supposed to be installed but was unsuccessful. Displaying superb acceleration and diving ability, the E-type planes overpowered the RAF's Hawker hurricane and equaled the Spitfire fighters in the Battle of Britain. However, with a flight range of only 560km, the E-4 planes were limited to just fifteen minutes of combat over British skies. Thus, the bombers were not given sufficient support and sustained heavy damage. As a result, the Luftwaffe's strategy to bomb England into surrender ended in failure. To deal with this drawback, the E-4 planes were equipped with additional 300L fuel tank. These improved fighters, called E-7, were first deployed at the end of 1940. After the Battle of Britain, the E-4/7 planes were sent to the front lines of Northern Africa. As the Bf109 F-type fighter's production was advanced, the E-4/7 was retired from the front lines. However, some veteran pilots continued to use the E-4/7 mainly for ground support duty until the summer of 1942.
15,89 €
inkl. Mwst. zuzüglich Versandkosten

1:72 Messerschmitt Bf109E-3

Art.Nr.: 300060750 Artikelbezeichnung: 1:72 Messerschmitt Bf109E-3 Without a doubt, the Messerschmitt Bf109 can be clamed as the most famous and successful German aircraft from the WW2. It was the world´s most advanced fighter at that time of its debut in 1936, and remained as the standard fighter for the Luftwaffe throughout the conflict. Created by the brilliant designer Willi Messerschmitt, it had the smallest possible air frame built around the most powerful engine available. It also boasted many of the then innovated features such as an all metal stressed skin construction, retractable main landing gear. Automatic Handley-Page leading edge slats, etc. The Bf109 saw the first combat during the Spanish Civil War and fully demonstrated it exceptional maneuverability, inherited from its precedent Bf108 Taifun (Typhoon) multi-purpose sports plane. The Bf109 underwent numerous improvements throughout its carrier, and mass production of the E variant started late in 1939. Within one year, about 2,000 "E" aircraft were rolled out. Its excellent performance greatly contributed in the active service of German pilots at the Western Front and during the "Battle of Britain". The E-3 version used and improved Daimler-Benz DB601Aa engine capable of 1,100 h.p. output. This engine had provision for mounting a 20mm MG FF cannon on the crankcase and firing through propeller hub. The Messerschmitt Bf109E was one of the best fighters of the early WW2 period, on a par with the British Spitfire. Detailierter Plastikmodellbausatz des Modells Messerschmitt Bf109E-3 im Maßstab 1:72
14,99 €
inkl. Mwst. zuzüglich Versandkosten

1:72 MIL Mi-24 Hind Helikopter

Detailierter Plastikmodellbausatz des Modells MIL Mi-24 Hind Helikopter im Maßstab 1:72
15,59 €
inkl. Mwst. zuzüglich Versandkosten

1:72 Mits. A6M3 Zero Fighter Mo. 32 Hamp

Art.Nr.: 300060784 Art.bezeichnung: 1:72 Mits. A6M3 Zero Fighter Mo. 32 Hamp The 1/72 scale Warbirds Collection welcomes the A6M3 Zero fighter Model 32, which was codenamed ‘Hamp’ by American forces. The Model 32 was an evolution of the Model 21; it received an improved Sakae 21 engine and shorter, redesigned main wing, with the effect that its top speed increased by 11km/h and it also had improved roll and diving speed, albeit at the cost of increased fuel consumption. In fact, this plus with the Model 32’s smaller fuel tank meant its range was some 1,000km shorter. The Model 32 made its maiden flight on July 15th 1941, and first saw service with the 2nd Fighter Group in Rabaul, the Philippines. All told, 343 Model 32 aircraft were manufactured, a number so low in part due to the range limitations of the aircraft. About the Model • This is a 1/72 scale plastic model assembly kit. • The model faithfully replicates the form of the A6M3 Zero Model 32 with square-shaped wings. • Main wing, fuselage, and engine cowl are all newly-designed parts. • Features such as flaps integrated with wing parts make this model easy to build while still retaining an excellent grasp of the aircraft’s details. • 3 sets of markings included.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
19,49 €
inkl. Mwst. zuzüglich Versandkosten

1:72 Mosquito B Mk.IV/PR Mk.IV

Art.Nr.: 300060753 Art.bezeichnung: 1:72 Mosquito B Mk.IV/PR Mk.IV The versatile Mosquito stood with the Spitfire fighter and Lancaster bomber and earned the respect of British pilots during World War II. In 1939, the De Havilland company envisioned the plane to be an unarmed high speed bomber, and had experience with the Comet, which was a wooden racing plane. Except for the engine and landing gear, the Mosquito was comprised of wood, offering strategic advantages. The wooden construction wold save on important metals such as aluminum, it could also be built in converted furniture factories. The Air Ministry was reluctant to adopt the wooden aircraft, but placed orders for 50 planes in March 1940 for reconnaissance use. In November 1940, the Mosquito reached speeds of 630km/h during test flights, demonstrating its potential and quickly prompting additional orders of 150 planes. The Mosquito PR Mk. I reconnaissance plane was first deployed in July 1941; the B Mk. IV bomber started deployment in the Spring of 1942. On May 31, 1942, the Mosquitoes led a daylight raid on Cairn. In September 1942, the Gestapo headquarters in Oslo was bombed. German officials delivering a daytime speech in Berlin were attacked on January 30, 1943. These events demonstrated the Mosquito's ability to carry heavy loads and deliver low altitude surprise attacks with accuracy. The camera equipped PR Mk. IV reconnaissance plane discovered the German Battleship Tirpitz in the Artic Circle and scouted V2 rocket facilities. The Mosquitoes performced their duties with minimal losses, displaying their remarkable abilities. Detailierter Plastikmodellbausatz des Modells Mosquito B Mk.IV/PR Mk.IV im Maßstab 1:72
21,49 €
inkl. Mwst. zuzüglich Versandkosten

1:72 P-51D Mustang North American

Art.Nr.: 300060749 Artikelbezeichnung: 1:72 P-51D Mustang North American In dieser Militärflugzeugserie finden Sie alle markanten Merkmale der Meisterstücke aus dem 2. Weltkrieg, moderne Jets und Hubschrauber sind naturgetreu nachgebildet. Man kann sich einen einzigartigen Einblick in die Welt der neuesten Düsenjäger, der Kampfflugzeuge des 2. Weltkrieges auf Seiten der Alliierten und der Achsenmächte verschaffen, dazu die verschiedenen Transporthubschrauber und Kampfhubschrauber zur U-Boot- und Panzerabwehr vergleichen. Hier besitzen Sie ein Fenster zu historischen Luftfahrt. Detailierter Plastikmodellbausatz des Modells P-51D Mustang North American im Maßstab 1:72
14,79 €
inkl. Mwst. zuzüglich Versandkosten

1:72 Republic F-84G Thunderjet

Art.Nr.: 300060745 Artikelbezeichnung: 1:72 Republic F-84G Thunderjet Towards the end of World War II, information about advanced aeronautical technology was captured in Germany by the U.S. Forces. One of them was an analysis of the studies carried out by Dr. Alexander Lippisch on delta winged aircraft. Based upon the information, the Douglas firm developed the F4D Skyray, the only operational interceptor with delta wings in the U.S. Navy. Starting the design in 1947, Douglas was awarded a contract for the construction and testing of two prototypes in December 1948. The first prototype took off on its maiden flight in January 1951. The second prototype flew shortly thereafter, and the airframe set two new world records, absolute speed record of 1,211 km/h and 100km closed course record of 1,171km/h, in October 1953. Having numerous improvements and refinements, the first production F4D-1 made its maiden flight in June 1954 and entered squadren service in April 1956. The distinctive 50 degree sweptback wings with round tips were equipped with leading edge slats and trailing edge elevons. A set of trimmers were installed on the inboard trailing edges of the wings. The outer portions of the wings could be folded upwards by oil pressure for carrier stowage. Although the Skyray never saw any combat, it proved its high capability as an interceptor with numerous world records and scramble actions in Taiwan in response to crises in the late 1950's. Detailierter Plastikmodellbausatz des Modells Republic F-84G Thunderjet im Maßstab 1:72
14,99 €
inkl. Mwst. zuzüglich Versandkosten

1:72 SEIRAN

Art.Nr.: 300060737 Art.bezeichnung: 1:72 SEIRAN This is a plastic model assembly kit of the Japanese Navy's special attacking machine, Harumi, developed for an unprecedented strategy of starting from catapult of a large submarine and launching a surprise attack. Faithfully reproduced a unique style fitted with a tightened nose or twin float equipped with an air-cooled engine. 800kg Movement dollies are also convenient for bombs and exhibitions. I printed a decal for the machine number of 6 aircraft. It would be interesting to explore the sunny storm that ended the war before the actual battle participation, by modeling its unknown ability. Detailierter Plastikmodellbausatz des Modells SEIRAN im Maßstab 1:72
12,79 €
inkl. Mwst. zuzüglich Versandkosten

1:72 Skyray

Art.Nr.: 300060741 Artikelbezeichnung: 1:72 Skyray Towards the end of World War II, many information about advanced aeronautical technology were captured in Germany by the U.S. Forces. One of them was an analysis of the studies carried out by Dr. Alexander Lippisch on delta winged aircraft. Based upon the information, the Douglas firm developed the F4D Skyray, the only operational interceptor with delta wings in the U.S. Navy. Starting the design in 1947, Douglas was awarded a contract for the construction and testing of two prototypes in December 1948. The first prototype took off on its maiden flight in January 1951. The second prototype flew shortly thereafter, and the airframe set two new world records, absolute speed record of 1,211 km/h and 100km closed course record of 1,171km/h, in October 1953. Having numerous improvements and refinements, the first production F4D-1 made its maiden flight in June 1954 and entered squadren service in April 1956. The distinctive 50 degree sweptback wings with round tips were equipped with leading edge slats and trailing edge elevons. A set of trimmers were installed on the inboard trailing edges of the wings. The outer portions of the wings could be folded upwards by oil pressure for carrier stowage. Although the Skyray never saw any combat, it proved its high capability as an interceptor with numerous world records and scramble actions in Taiwan in response to crises in the late 1950's. Detailierter Plastikmodellbausatz des Modells Skyray im Maßstab 1:72
13,79 €
inkl. Mwst. zuzüglich Versandkosten

1:72 Sukhoi SU-27 B2 Sea-Flanker

Art.Nr.: 300060757 Artikelbezeichnung: 1:72 Sukhoi SU-27 B2 Sea-Flanker In dieser Militärflugzeugserie finden Sie alle markanten Merkmale der Meisterstücke aus dem 2. Weltkrieg, moderne Jets und Hubschrauber sind naturgetreu nachgebildet. Man kann sich einen einzigartigen Einblick in die Welt der neuesten Düsenjäger, der Kampfflugzeuge des 2. Weltkrieges auf Seiten der Alliierten und der Achsenmächte verschaffen, dazu die verschiedenen Transporthubschrauber und Kampfhubschrauber zur U-Boot- und Panzerabwehr vergleichen. Hier besitzen Sie ein Fenster zu historischen Luftfahrt. Detailierter Plastikmodellbausatz des Modells Sukhoi SU-27 B2 Sea-Flanker im Maßstab 1:72
23,99 €
inkl. Mwst. zuzüglich Versandkosten

1:72 SUPERMARINE SPITFIRE MK1

Art.Nr.: 300060748 Artikelbezeichnung: 1:72 SUPERMARINE SPITFIRE MK1 The Supermarine Spitfire is regarded by many as the most esthetically designed single seat fighter to appear during the Second World War. It was conceived by the brilliant British designer Reginald J. Mitchell, and first flew on 5 March 1936. It was an advanced, low wing single seat monoplane with a very smooth flush riveted metal skin and a long flowing front cowling. Using the famous RollsRoyce "Merlin' liquid cooled 12 cylinder engine that produced more than 1,000 horsepower, the Mk I Spitfire attained a top speed of 586km/h. The very distinctive elliptical shaped wing was useful in reducing parasitic drag and allowed a fairly thin wing construction. It carried a large coolant radiator under the starboard wing, and a small oil cooler under the port wing, giving it an asymmetrical appearance when viewed from the front and bottom. The retractable main landing gear also contributed to its smooth lines, and gave it higher performance. The Mk I Spitfire was armed with eight 7.7mm machine guns, four to each wing. The early production of Mk I Spitfires used a fixed pitch wooden two blade propeller, which was later replaced with a two-pitch wooden two blade propeller. The Spitfire's combat action in thwarting Germany's attempt to raid the English mainland during 1940, and known as the "Battle of Britain" has ensured this fighter's pride of place in the minds of England's men and women forever.
14,99 €
inkl. Mwst. zuzüglich Versandkosten

1:72 US F-16CJ Fighting Falcon

Art.Nr.: 300060786 Artikelbezeichnung: 1:72 US F-16CJ Fighting Falcon The Lockheed Martin F-16 Fighting Falcon is a single-engine multirole fighter aircraft originally developed by General Dynamics for the United States Air Force (USAF). It was designed as an air superiority day fighter and later it evolved into a successful all-weather multirole aircraft. As of 2012, over 4,500 aircraft have been built since production was approved in 1976. In 2004 and in 2008 Tamiya’s model designers captured this iconic fighter in 1/48 scale and in 1/32 scale respectively, which both models received tremendous accolades from the modeling community and the industry press. The third release continues Tamiya’s tradition of excellence with this 1/72 cale model. This version is specifically of the F-16CJ (Block50) and it shares some of the same level of details as its larger counterparts. It is the perfect scale model for modelers confined to smaller display areas to show off their hard modeling work.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
27,99 €
inkl. Mwst. zuzüglich Versandkosten

1:72 Vought F4U-1D Corsair

Art.Nr.: 300060752 Artikelbezeichnung: 1:72 Vought F4U-1D Corsair Designed around the new Pratt & Whitney 2,000HP radial engine and tuning the largest propeller ever attached to a fighter plane, the Vought F4U Corsair became a legend in its own time. The F4U-1 was the first production version of the Corsair. It had an inverted gull wing and a production version of the Corsair. It had an inverted gull wing and a framed canopy with a flat top. However may problems were found soon. For example, the port wing stall often gave the Corsair unstable landing. Anther problem was poor visibility because of its long nose and framed canopy. Therefore F4U-1A: the cockpit was raised about seven inches, the framed canopy was replaced with a semi-bubble design canopy, and the taller tail wheel strut was equipped; was introduced. F4U-1D with clear vision canopy on frameless was introduced later for more visibility. Also the F4U-1D had two pylons under the center wing section that could carry the bombs up to 1,000 ponds and the napalm. Furthermore 5 inch rockets could be carried under each wing. Therefore in1944, the F4U-1D was formally deployed as the first carrier based aircraft of Corsair series. Beginning by placing the F4U 1D as Marine squadrons VMF-124 and VMF 213 aboard the ESSEX on the way to the Phillippines, the F4U-1D was used for attacking Japan as the first operation from U.S. Navy in 1945. About 3,700 amounts of F4U-1D were produced, then it held an established position from U.S. Navy because of its ability and reliance. Detailierter Plastikmodellbausatz des Modells Vought F4U-1D Corsair im Maßstab 1:72
19,99 €
inkl. Mwst. zuzüglich Versandkosten

1:72 WWII Mitsubishi A6M5 Zero Fighter

Art.Nr.: 300060779 Artikelbezeichnung: 1:72 WWII Mitsubishi A6M5 Zero Fighter This is the definitive 1/72 plastic model of the Japanese Navy's representative fighter aircraft, the Mitsubishi A6M5 Zero Fighter. History of the Zero fighter: The Mitsubishi A6M Zero was the Japanese Navy's main fighter throughout the Pacific Theater during WWII. In the latter half of the war, the model 52 Zero, a refined version of the model 22, aimed to take on the ever increasing numbers of high-performance U.S. aircraft. It featured a shorter 11m wingspan with rounded wingtips, was powered by the same 1130hp Nakajima "Sakae" engine as seen in the model 22 Zero, and had the new exhaust propulsion system which gave it a 565km/h top speed. The A6M5 came armed with two 7.7mm machine guns and 20mm belt-fed cannons. Deployment of the A6M5 began in the autumn of 1943, and they saw action in the Solomons campaign as well as over the Marianas. It defended Japan against overwhelming numbers of superior U.S. aircraft up until the very last day of the war.
21,99 €
inkl. Mwst. zuzüglich Versandkosten

1:35 Alu Geschützrohr Hummel

Art.Nr.: 300012688 Art.bezeichnung: 1:35 Alu Geschützrohr Hummel ★Add even more detail to your 1/35 scale model of the German Self-Propelled Howitzer Hummel (Late Production) with this piece! ★The barrel is made from turned aluminum, and even features fine rifling detail at the tip.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
11,29 €
inkl. Mwst. zuzüglich Versandkosten

1:12 Honda Monkey 125

Art.Nr.: 300014134 Art.bezeichnung: 1:12 Honda Monkey 125 This is a new entry into the famed 1/12 Motorcycle Series, as the all-new Honda Monkey 125 – which went on sale in mid-2018 – quickly joins the Tamiya line-up, too! The Monkey line was first sold in Japan in 1967, and soon gained long-lasting worldwide acclaim with its rather diminutive yet cheerful design. The Monkey 125 features a bigger 124cc engine, yet is packed with the Monkey’s trademark cheeky charm – chunky tires, rounded design motifs for headlight, speedo and more, plus gleaming chromed fenders and muffler cover. This playful little monkey looks set to be another worldwide hit, and now you can get your hands on it, in detailedTamiya 1/12! About the Model - This is a 1/12 scale plastic model assembly kit.   Length: 142mm, width: 63mm, height: 86mm. - The compact, quirky form of the Monkey 125 is captured with   superb accuracy. - Engine, swing arm, front fork and rear fender parts are secured   to the frame using screws for a durable finish. - Metal-plated parts are used to depict fenders and light cases. - Depictions of the chunky tires are dedicated parts for this model. - Comes with clear parts, damper springs, vinyl tubing to recreate   various lines, and of course decals to recreate markings.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
32,49 €
inkl. Mwst. zuzüglich Versandkosten

1:12 Kawasaki Ninja ZX-12R Street 1999

Art.Nr.: 300014084 Artikelbezeichnung: 1:12 Kawasaki Ninja ZX-12R Street 1999 Der Öffentlichkeit 1999 vorgestellte Kawasaki Ninja ZX-12R verfügt über die gewaltige Leistung von 178 PS und eine Spitzengescwindigkeit von mehr als 300km/h. Er verbrachte mehr Zeit im Windkanal als irgendein anderes Motorrad in Kawasaki`s Geschichte. Das Triebwerk der Ninja ist ein 1199cm³ 4 Reihenzylindermotor mit Benzineinspritzung.
41,49 €
inkl. Mwst. zuzüglich Versandkosten

1:12 Porsche Carrera GT

Art.Nr.: 300012050 Artikelbezeichnung: 1:12 Porsche Carrera GT Der TAMIYA Porsche Carrera GT ist ein absolut hochwertiger Premiumbausatz im Maßstab 1:12. Er basiert auf dem vorgefertigten Sammlermodell und verfügt über die gleichen technischen Details. So verfügt TAMIYAs Topmodell über zahlreiche funktionelle und bewegliche Bauteile wie z. B. die Lenkung. Robuste Die-Cast Querlenker mit funktionierenden Dämpfern und Stabilisatoren simulieren die Dämpfung. Türen, Motor- und Fronthaube sind an Metallscharnieren beweglich angebracht. So gewährt man Betrachtern einen Einblick auf das fein detaillierte Cockpit sowie den V10-Motor. Der Heckspoiler lässt sich wie beim Vorbild per Druck auf das Nummernschild ausfahren. Das Hard-Top kann ebenfalls vorbildgetreu unter der Fronthaube verstaut werden.
439,99 €
inkl. Mwst. zuzüglich Versandkosten

1:12 Suzuki GSX1300R Hayabusa Street ´98

Art.Nr.: 300014090 Artikelbezeichnung: 1:12 Suzuki GSX1300R Hayabusa Street ´98 Im Jahre 1998 wurde der Suzuki Hayabusa 1300 vorgestellt. Ihre überwältigenden Daten: 175PS, 141 Nm Drehmoment und 215kg Bremslast überstiegen sämtliche Leistungserwartungen. Ein wassergekühlter 1299cm³ Reihenvierzylinder mit 4 DOHC Ventilen ist in einen Aluminium-Doppelrahmen eingebaut. - 142 Bauteile - Bewegliche Teile Länge des Modells: 178 mm
41,49 €
inkl. Mwst. zuzüglich Versandkosten

1:16 Kübelwagen Type 82 Europa Feldzug

Art.Nr.: 300036205 Artikelbezeichnung: 1:16 Kübelwagen Type 82 Europa Feldzug About the Kubelwagen Type 82 The Kubelwagen was originally designed as a civilian vehicle, but after German militaristic expansion and mobilization in the late 1930's plans were soon made for a military version. After the poor performance of the Kubelwagen Type 62, an improved model designated Type 82 went into mass production in 1940. The Kubelwagen Type 82 featured a trustworthy 4-cylinder, horizontally opposed, air-cooled engine, capable of 23.5hp at 3000rpm and provided a top speed of 80km/h. Over 50,000 Kubelwagens were produced by the war's end. From the searing heat of the North African Front to the blistering cold of the Russian Front, the Kubelwagen Type 82 was used for reconnaissance and communications purposes. Kubelwagen Type 82 (European Campaign) Features •Kubelwagen Type 82 plastic assembly kit. •1/16 scale, Overall length: 242mm, Overall width: 100mm. •Equipped with standard tires. Strengthening pressed lines have been accurately reproduced. •All doors and engine access door can be assembled in opened or closed position. •Hood can be assembled in the up or down position. •Tires are made of real rubber and front wheels can be steered by moving steering wheel. •Kit replicates full set of accessories including fuel jerry cans and driver figure.
99,99 €
inkl. Mwst. zuzüglich Versandkosten

1:16 Panzer-Kampfwagen IV Ausf.J (S.Mot)

Art.Nr.: 300036211 Artikelbezeichnung: 1:16 Panzer-Kampfwagen IV Ausf.J (S.Mot) This 1/16 scale Big Tanks series motorized model kit recreates the J variant of the Pz.Kpfw. IV. It was the true workhorse of the German military in WWII, which proved to be a formidable foe to Allied troops. The simplified, defensively improved Ausf.J was one of the final Pz.Kpfw. IV variants, fighting through to the end of the war as the core of German tank units, along with the Panther and King Tiger.
499,99 €
inkl. Mwst. zuzüglich Versandkosten

1:16 US KPz M1A2 Abrams Standmodell

Art.Nr.: 300036212 Artikelbezeichnung: 1:16 US KPz M1A2 Abrams Standmodell This Large-Scale 1/16 model recreates the current stalwart of U.S. forces, the M1A2 Abrams. The M1 Abrams has been around since the early 1980s, receiving constant upgrades to ensure that it stays at the cutting edge of military technology. M1A2s were introduced from 1992 and developed as next generations of the tank, chock full of the front-line technology and bringing the M1 into the digital age. They featured depleted uranium armor, a modified commander’s cupola and more, and saw action in the conflict in Iraq in 2003. Specifications •1/16 scale plastic model assembly kit of the M1A2 Abrams. •The form of the M1A2 with its flat turret and hull armor is expertly recreated, complete with depictions of anti-slip surfaces. •Features a tough duralumin chassis. Metal parts recreate drive sprockets, idler wheels, suspension parts and more. •Includes durable pre-assembled resin double-pin tracks secured with metal pins and utilizing rubber pads. •The gun features an aluminum barrel for superb realism. •Photo-etched parts are used to recreate engine deck and turret rear basket.
479,99 €
inkl. Mwst. zuzüglich Versandkosten

1:20 Ferrari F1-2000 Gr.Prix Rennwagen

Art.Nr.: 300020048 Artikelbezeichnung: 1:20 Ferrari F1-2000 Gr.Prix Rennwagen About the Ferrari F1-2000 Achieving the long sought after double victory of the Drivers' Championship and Constructors' Championship at the 2000 F1 World Championships, Ferrari capped off the season in a blaze of crimson glory. Their state-of-the-art machine is now available as a precise assembly model kit from Tamiya. The exterior of the Ferrari F1-2000 features exquisitely recreated curvatures, tried and tested in Ferrari's own wind tunnel. Tamiya's 1/20 scale recreation features the same intrepid shape, which encases the intricately designed 3-liter, V10 engine. Tamiya invites you to commemorate Ferrari's brilliant 2000 season with this masterful 1/20 scale rendition.
36,99 €
inkl. Mwst. zuzüglich Versandkosten

1:20 Lotus Typ 79 1978

Art.Nr.: 300020060 Artikelbezeichnung: 1:20 Lotus Typ 79 1978 • 1/20 scale plastic assembly model kit of the Lotus type 79. • The front and rear upper cowls can be removed after assembly to view the engine and cockpit area. • The monocoque chassis, suspension, and engine have been precisely reproduced. • Synthetic rubber tires included. • Top quality decals to depict the Lotus seen at both British and German GP's, which did not feature JPS markings, are included. • Newly designed tires and metal funnel covers included. • Add further detail to your model with Item 12635 1/20 Lotus Type 79 1978 Photo-Etched Parts Set.  
62,99 €
inkl. Mwst. zuzüglich Versandkosten
Versandinformation

Wenn Sie diesen Artikel in den Warenkorb legen, ist die Lieferadresse Ihrer Bestellung auf folgende Länder beschränkt:

nach oben