Diese Website verwendet Cookies. Durch die Nutzung der Website stimmen Sie der Verwendung von Cookies zu.
OK
Tamiya CarsonMajoretteDickie ToysSchuco 

1:72 P-47D Thunderbolt Razorback

Art.Nr.: 300060769 Artikelbezeichnung: 1:72 P-47D Thunderbolt Razorback The P-47 was the first single-seated fighter to be equipped with a supercharger paired with a 2000hp engine, allowing it to fly at the same high altitude as bombers. Armed with eight 12.7mm machineguns, the Thunderbolt, with the P-51 Mustang, constituted the main fighters of the US Army Air Force. This is the representation of P-47D early production that was nicknamed "razorback" because of the shape of its upper fuselage behind the cockpit. The P-47D was a high-speed, high-altitude capable fighter and escorted the allied bombers that were conducting raids over Germany. Its 1-ton payload and its robustness made the Thunderbolt the perfect aircraft for ground attacking missions. About the Model •Sharp design of rear fuselage accurately reproduced. •Unique belly shape perfectly replicated thanks to left-right symmetrical construction. • Joining beams used to attach wings to fuselage, ensuring accurate wing angle. •Loads of accessories including 2 x 108 gallon tanks, 2 x 500 pound bombs and 2 x M10 rocket launchers. •For extra accuracy, kit comes with two different propellers to match decal markings. •Decals for 2 fighter groups, including one from Europe and one from the Pacific.
19,99 €
inkl. Mwst. zuzüglich Versandkosten

1:72 P-51D Mustang North American

Art.Nr.: 300060749 Artikelbezeichnung: 1:72 P-51D Mustang North American In dieser Militärflugzeugserie finden Sie alle markanten Merkmale der Meisterstücke aus dem 2. Weltkrieg, moderne Jets und Hubschrauber sind naturgetreu nachgebildet. Man kann sich einen einzigartigen Einblick in die Welt der neuesten Düsenjäger, der Kampfflugzeuge des 2. Weltkrieges auf Seiten der Alliierten und der Achsenmächte verschaffen, dazu die verschiedenen Transporthubschrauber und Kampfhubschrauber zur U-Boot- und Panzerabwehr vergleichen. Hier besitzen Sie ein Fenster zu historischen Luftfahrt. Detailierter Plastikmodellbausatz des Modells P-51D Mustang North American im Maßstab 1:72
14,79 €
inkl. Mwst. zuzüglich Versandkosten

1:72 Republic F-84G Thunderjet

Art.Nr.: 300060745 Artikelbezeichnung: 1:72 Republic F-84G Thunderjet Towards the end of World War II, information about advanced aeronautical technology was captured in Germany by the U.S. Forces. One of them was an analysis of the studies carried out by Dr. Alexander Lippisch on delta winged aircraft. Based upon the information, the Douglas firm developed the F4D Skyray, the only operational interceptor with delta wings in the U.S. Navy. Starting the design in 1947, Douglas was awarded a contract for the construction and testing of two prototypes in December 1948. The first prototype took off on its maiden flight in January 1951. The second prototype flew shortly thereafter, and the airframe set two new world records, absolute speed record of 1,211 km/h and 100km closed course record of 1,171km/h, in October 1953. Having numerous improvements and refinements, the first production F4D-1 made its maiden flight in June 1954 and entered squadren service in April 1956. The distinctive 50 degree sweptback wings with round tips were equipped with leading edge slats and trailing edge elevons. A set of trimmers were installed on the inboard trailing edges of the wings. The outer portions of the wings could be folded upwards by oil pressure for carrier stowage. Although the Skyray never saw any combat, it proved its high capability as an interceptor with numerous world records and scramble actions in Taiwan in response to crises in the late 1950's. Detailierter Plastikmodellbausatz des Modells Republic F-84G Thunderjet im Maßstab 1:72
14,99 €
inkl. Mwst. zuzüglich Versandkosten

1:72 SEIRAN

Art.Nr.: 300060737 Art.bezeichnung: 1:72 SEIRAN This is a plastic model assembly kit of the Japanese Navy's special attacking machine, Harumi, developed for an unprecedented strategy of starting from catapult of a large submarine and launching a surprise attack. Faithfully reproduced a unique style fitted with a tightened nose or twin float equipped with an air-cooled engine. 800kg Movement dollies are also convenient for bombs and exhibitions. I printed a decal for the machine number of 6 aircraft. It would be interesting to explore the sunny storm that ended the war before the actual battle participation, by modeling its unknown ability. Detailierter Plastikmodellbausatz des Modells SEIRAN im Maßstab 1:72
12,79 €
inkl. Mwst. zuzüglich Versandkosten

1:72 Skyray

Art.Nr.: 300060741 Artikelbezeichnung: 1:72 Skyray Towards the end of World War II, many information about advanced aeronautical technology were captured in Germany by the U.S. Forces. One of them was an analysis of the studies carried out by Dr. Alexander Lippisch on delta winged aircraft. Based upon the information, the Douglas firm developed the F4D Skyray, the only operational interceptor with delta wings in the U.S. Navy. Starting the design in 1947, Douglas was awarded a contract for the construction and testing of two prototypes in December 1948. The first prototype took off on its maiden flight in January 1951. The second prototype flew shortly thereafter, and the airframe set two new world records, absolute speed record of 1,211 km/h and 100km closed course record of 1,171km/h, in October 1953. Having numerous improvements and refinements, the first production F4D-1 made its maiden flight in June 1954 and entered squadren service in April 1956. The distinctive 50 degree sweptback wings with round tips were equipped with leading edge slats and trailing edge elevons. A set of trimmers were installed on the inboard trailing edges of the wings. The outer portions of the wings could be folded upwards by oil pressure for carrier stowage. Although the Skyray never saw any combat, it proved its high capability as an interceptor with numerous world records and scramble actions in Taiwan in response to crises in the late 1950's. Detailierter Plastikmodellbausatz des Modells Skyray im Maßstab 1:72
13,79 €
inkl. Mwst. zuzüglich Versandkosten

1:72 Sukhoi SU-27 B2 Sea-Flanker

Art.Nr.: 300060757 Artikelbezeichnung: 1:72 Sukhoi SU-27 B2 Sea-Flanker In dieser Militärflugzeugserie finden Sie alle markanten Merkmale der Meisterstücke aus dem 2. Weltkrieg, moderne Jets und Hubschrauber sind naturgetreu nachgebildet. Man kann sich einen einzigartigen Einblick in die Welt der neuesten Düsenjäger, der Kampfflugzeuge des 2. Weltkrieges auf Seiten der Alliierten und der Achsenmächte verschaffen, dazu die verschiedenen Transporthubschrauber und Kampfhubschrauber zur U-Boot- und Panzerabwehr vergleichen. Hier besitzen Sie ein Fenster zu historischen Luftfahrt. Detailierter Plastikmodellbausatz des Modells Sukhoi SU-27 B2 Sea-Flanker im Maßstab 1:72
23,99 €
inkl. Mwst. zuzüglich Versandkosten

1:72 SUPERMARINE SPITFIRE MK1

Art.Nr.: 300060748 Artikelbezeichnung: 1:72 SUPERMARINE SPITFIRE MK1 The Supermarine Spitfire is regarded by many as the most esthetically designed single seat fighter to appear during the Second World War. It was conceived by the brilliant British designer Reginald J. Mitchell, and first flew on 5 March 1936. It was an advanced, low wing single seat monoplane with a very smooth flush riveted metal skin and a long flowing front cowling. Using the famous RollsRoyce "Merlin' liquid cooled 12 cylinder engine that produced more than 1,000 horsepower, the Mk I Spitfire attained a top speed of 586km/h. The very distinctive elliptical shaped wing was useful in reducing parasitic drag and allowed a fairly thin wing construction. It carried a large coolant radiator under the starboard wing, and a small oil cooler under the port wing, giving it an asymmetrical appearance when viewed from the front and bottom. The retractable main landing gear also contributed to its smooth lines, and gave it higher performance. The Mk I Spitfire was armed with eight 7.7mm machine guns, four to each wing. The early production of Mk I Spitfires used a fixed pitch wooden two blade propeller, which was later replaced with a two-pitch wooden two blade propeller. The Spitfire's combat action in thwarting Germany's attempt to raid the English mainland during 1940, and known as the "Battle of Britain" has ensured this fighter's pride of place in the minds of England's men and women forever.
14,99 €
inkl. Mwst. zuzüglich Versandkosten

1:72 US F-16CJ Fighting Falcon

Art.Nr.: 300060786 Artikelbezeichnung: 1:72 US F-16CJ Fighting Falcon The Lockheed Martin F-16 Fighting Falcon is a single-engine multirole fighter aircraft originally developed by General Dynamics for the United States Air Force (USAF). It was designed as an air superiority day fighter and later it evolved into a successful all-weather multirole aircraft. As of 2012, over 4,500 aircraft have been built since production was approved in 1976. In 2004 and in 2008 Tamiya’s model designers captured this iconic fighter in 1/48 scale and in 1/32 scale respectively, which both models received tremendous accolades from the modeling community and the industry press. The third release continues Tamiya’s tradition of excellence with this 1/72 cale model. This version is specifically of the F-16CJ (Block50) and it shares some of the same level of details as its larger counterparts. It is the perfect scale model for modelers confined to smaller display areas to show off their hard modeling work.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
27,99 €
inkl. Mwst. zuzüglich Versandkosten

1:72 USA F. BELL X-1 MACH BUSTER

Art.Nr.: 300060740 Artikelbezeichnung: 1:72 USA F. BELL X-1 MACH BUSTER In dieser Militärflugzeugserie finden Sie alle markanten Merkmale der Meisterstücke aus dem 2. Weltkrieg, moderne Jets und Hubschrauber sind naturgetreu nachgebildet. Man kann sich einen einzigartigen Einblick in die Welt der neuesten Düsenjäger, der Kampfflugzeuge des 2. Weltkrieges auf Seiten der Alliierten und der Achsenmächte verschaffen, dazu die verschiedenen Transporthubschrauber und Kampfhubschrauber zur U-Boot- und Panzerabwehr vergleichen. Hier besitzen Sie ein Fenster zu historischen Luftfahrt. Detailierter Plastikmodellbausatz des Modells USA F. BELL X-1 MACH BUSTER im Maßstab 1:72
12,69 €
inkl. Mwst. zuzüglich Versandkosten

1:72 Vought F4U-1A Corsair

Art.Nr.: 300060775 Artikelbezeichnung: 1:72 Vought F4U-1A Corsair About the Vought F4U-1A Corsair Introduced into service in 1942, the Vought F4U-1 featured inverted gull wings and a massive 2,000hp engine spinning the largest propeller mounted on a fighter at the time. While the fighter's performance and toughness was quite impressive, deficiencies such as inadequate forward visibility, restricted all-round visibility due to the early frame-like canopy, and the tendency for the left and right wings to stall at different speeds led to various improvements being added throughout production, eventually resulting in the F4U-1A version. These improvements included a longer tailwheel leg for better forward visibility, a new canopy for better all-round visibility, and an almost unnoticeable 15cm stall strip fixed to the leading edge of the right wing to ensure both wings would stall at the same speed. About the Model •1/72 scale assembly model kit of the Vought F4U-1A Corsair •Kit depicts a final F4U-1A Corsair production version with all improvements or versions at different stages of the improvement process. •Parts for 1000lb. bomb, external fuel tank, two types of propellers, and two types of tailwheel are included to provide many modelling possibilities •High quality decals for 3 different sets of markings
22,99 €
inkl. Mwst. zuzüglich Versandkosten

1:72 Vought F4U-1D Corsair

Art.Nr.: 300060752 Artikelbezeichnung: 1:72 Vought F4U-1D Corsair Designed around the new Pratt & Whitney 2,000HP radial engine and tuning the largest propeller ever attached to a fighter plane, the Vought F4U Corsair became a legend in its own time. The F4U-1 was the first production version of the Corsair. It had an inverted gull wing and a production version of the Corsair. It had an inverted gull wing and a framed canopy with a flat top. However may problems were found soon. For example, the port wing stall often gave the Corsair unstable landing. Anther problem was poor visibility because of its long nose and framed canopy. Therefore F4U-1A: the cockpit was raised about seven inches, the framed canopy was replaced with a semi-bubble design canopy, and the taller tail wheel strut was equipped; was introduced. F4U-1D with clear vision canopy on frameless was introduced later for more visibility. Also the F4U-1D had two pylons under the center wing section that could carry the bombs up to 1,000 ponds and the napalm. Furthermore 5 inch rockets could be carried under each wing. Therefore in1944, the F4U-1D was formally deployed as the first carrier based aircraft of Corsair series. Beginning by placing the F4U 1D as Marine squadrons VMF-124 and VMF 213 aboard the ESSEX on the way to the Phillippines, the F4U-1D was used for attacking Japan as the first operation from U.S. Navy in 1945. About 3,700 amounts of F4U-1D were produced, then it held an established position from U.S. Navy because of its ability and reliance. Detailierter Plastikmodellbausatz des Modells Vought F4U-1D Corsair im Maßstab 1:72
19,99 €
inkl. Mwst. zuzüglich Versandkosten

1:72 WWII Mitsubishi A6M5 Zero Fighter

Art.Nr.: 300060779 Artikelbezeichnung: 1:72 WWII Mitsubishi A6M5 Zero Fighter This is the definitive 1/72 plastic model of the Japanese Navy's representative fighter aircraft, the Mitsubishi A6M5 Zero Fighter. History of the Zero fighter: The Mitsubishi A6M Zero was the Japanese Navy's main fighter throughout the Pacific Theater during WWII. In the latter half of the war, the model 52 Zero, a refined version of the model 22, aimed to take on the ever increasing numbers of high-performance U.S. aircraft. It featured a shorter 11m wingspan with rounded wingtips, was powered by the same 1130hp Nakajima "Sakae" engine as seen in the model 22 Zero, and had the new exhaust propulsion system which gave it a 565km/h top speed. The A6M5 came armed with two 7.7mm machine guns and 20mm belt-fed cannons. Deployment of the A6M5 began in the autumn of 1943, and they saw action in the Solomons campaign as well as over the Marianas. It defended Japan against overwhelming numbers of superior U.S. aircraft up until the very last day of the war.
21,99 €
inkl. Mwst. zuzüglich Versandkosten

1:12 Honda CB 750F Custom Tuned

Art.Nr.: 300014066 Artikelbezeichnung: 1:12 Honda CB 750F Custom Tuned 1979 führte Honda den CB750F ein. Die Maschine stammt direkt von der Ausführung für die Straßen-Endurance-Weltmeisterschaft ab, welche das Rennen gewann. Der perfektionierte DOHC-4-Takt 4-Zylinder Motor mit 16 Ventilen erzielt mit einem Dachkammer-Verbrennungsraum optimalen Wirkungsgrad.
24,49 €
inkl. Mwst. zuzüglich Versandkosten

1:12 Porsche Carrera GT

Art.Nr.: 300012050 Artikelbezeichnung: 1:12 Porsche Carrera GT Der TAMIYA Porsche Carrera GT ist ein absolut hochwertiger Premiumbausatz im Maßstab 1:12. Er basiert auf dem vorgefertigten Sammlermodell und verfügt über die gleichen technischen Details. So verfügt TAMIYAs Topmodell über zahlreiche funktionelle und bewegliche Bauteile wie z. B. die Lenkung. Robuste Die-Cast Querlenker mit funktionierenden Dämpfern und Stabilisatoren simulieren die Dämpfung. Türen, Motor- und Fronthaube sind an Metallscharnieren beweglich angebracht. So gewährt man Betrachtern einen Einblick auf das fein detaillierte Cockpit sowie den V10-Motor. Der Heckspoiler lässt sich wie beim Vorbild per Druck auf das Nummernschild ausfahren. Das Hard-Top kann ebenfalls vorbildgetreu unter der Fronthaube verstaut werden.
439,99 €
inkl. Mwst. zuzüglich Versandkosten

1:12 Yamaha YZF-R1 1000ccm 1997 Street

Art.Nr.: 300014073 Artikelbezeichnung: 1:12 Yamaha YZF-R1 1000ccm 1997 Street At the Motorcycle Show held in Milan, Italy, in September of 1997, the Yamaha YZF-R1 supersport motorcycle made its debut. Sporting a powerful 1000cc engine, it has the compact construction of a 400cc bike. The YZF-R1 was developed for maximum possible cornering ability in a production motorcycle. With a 1000cc water-cooled, four stroke, 4-cylinder, 5-valve engine and adopting a redesigned EXUP exhaust system, it pumps out 150hp of high-intensity power. Subtle throttle control makes both superb acceleration response and rhythmic cornering a reality. The Deltabox II aluminum frame was sought after not only for its rigidity, but more so for its moderate flexibility during tight cornering. With the addition of a long span aluminum swing arm, high control ability has been achieved. By adopting an upside-down front fork, stroke distance has been increased and traction heightened. Boasting a sharp form with multi-reflector lights, the YZF-R1 has been given an unprecedented style. From the contact points between the rider and motorcycle, right down to the material used in the seat and tank, the YZF-R1 has been thoroughly studied. Of course, the abundance of high precision and high quality parts goes without saying. Designed to cruise at high speeds on winding roads, the YZF-R1 shatters expectations about large exhaust engine motorcycles. Yamaha has expanded the possibilities of a 1000cc bike.
31,49 €
inkl. Mwst. zuzüglich Versandkosten

1:16 Kübelwagen Type 82 Europa Feldzug

Art.Nr.: 300036205 Artikelbezeichnung: 1:16 Kübelwagen Type 82 Europa Feldzug About the Kubelwagen Type 82 The Kubelwagen was originally designed as a civilian vehicle, but after German militaristic expansion and mobilization in the late 1930's plans were soon made for a military version. After the poor performance of the Kubelwagen Type 62, an improved model designated Type 82 went into mass production in 1940. The Kubelwagen Type 82 featured a trustworthy 4-cylinder, horizontally opposed, air-cooled engine, capable of 23.5hp at 3000rpm and provided a top speed of 80km/h. Over 50,000 Kubelwagens were produced by the war's end. From the searing heat of the North African Front to the blistering cold of the Russian Front, the Kubelwagen Type 82 was used for reconnaissance and communications purposes. Kubelwagen Type 82 (European Campaign) Features •Kubelwagen Type 82 plastic assembly kit. •1/16 scale, Overall length: 242mm, Overall width: 100mm. •Equipped with standard tires. Strengthening pressed lines have been accurately reproduced. •All doors and engine access door can be assembled in opened or closed position. •Hood can be assembled in the up or down position. •Tires are made of real rubber and front wheels can be steered by moving steering wheel. •Kit replicates full set of accessories including fuel jerry cans and driver figure.
99,99 €
inkl. Mwst. zuzüglich Versandkosten

1:16 Panzer-Kampfwagen IV Ausf.J (S.Mot)

Art.Nr.: 300036211 Artikelbezeichnung: 1:16 Panzer-Kampfwagen IV Ausf.J (S.Mot) This 1/16 scale Big Tanks series motorized model kit recreates the J variant of the Pz.Kpfw. IV. It was the true workhorse of the German military in WWII, which proved to be a formidable foe to Allied troops. The simplified, defensively improved Ausf.J was one of the final Pz.Kpfw. IV variants, fighting through to the end of the war as the core of German tank units, along with the Panther and King Tiger.
499,99 €
inkl. Mwst. zuzüglich Versandkosten

1:16 US KPz M1A2 Abrams Standmodell

Art.Nr.: 300036212 Artikelbezeichnung: 1:16 US KPz M1A2 Abrams Standmodell This Large-Scale 1/16 model recreates the current stalwart of U.S. forces, the M1A2 Abrams. The M1 Abrams has been around since the early 1980s, receiving constant upgrades to ensure that it stays at the cutting edge of military technology. M1A2s were introduced from 1992 and developed as next generations of the tank, chock full of the front-line technology and bringing the M1 into the digital age. They featured depleted uranium armor, a modified commander’s cupola and more, and saw action in the conflict in Iraq in 2003. Specifications •1/16 scale plastic model assembly kit of the M1A2 Abrams. •The form of the M1A2 with its flat turret and hull armor is expertly recreated, complete with depictions of anti-slip surfaces. •Features a tough duralumin chassis. Metal parts recreate drive sprockets, idler wheels, suspension parts and more. •Includes durable pre-assembled resin double-pin tracks secured with metal pins and utilizing rubber pads. •The gun features an aluminum barrel for superb realism. •Photo-etched parts are used to recreate engine deck and turret rear basket.
479,99 €
inkl. Mwst. zuzüglich Versandkosten

1:16 WWII Figur Deut. Infanterie Soldat

Art.Nr.: 300036303 Artikelbezeichnung: 1:16 WWII Figur Deut. Infanterie Soldat Soldat der Deutschen Elite-Infanterie.
17,99 €
inkl. Mwst. zuzüglich Versandkosten
inkl. Mwst. zuzüglich Versandkosten
inkl. Mwst. zuzüglich Versandkosten

1:24 Nissan Skyline GT-R (R32) Nismo-Cu.

Art.Nr.: 300024341 Art.bezeichnung: 1/24 GT-R (R32) Nismo-Custom This is a model of the classic Skyline GT-R (R32). This particular kit varies from previous releases as it has brand new parts that depict customizing accessories that were designed and made by Nissan's tuning outfit Nismo. The R32 is the 1989 version of the legendary GT-R. It had a 4WD drivetrain; it was mated to a 280hp engine and it was loaded with cutting-edge design and technological innovations for its day.
35,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Subaru Impreza WRC 2001

Art.Nr.: 300024240 Artikelbezeichnung: 1:24 Subaru Impreza WRC 2001 Soon after the adoption of the new regulations for the World Rally Championships in 1997, Subaru boldly entered their Impreza WRC. That well-balanced machine was equipped with a powerful horizontally opposed 4 cylinder turbo engine, and secured that year's Manufacturers Title. In the following years, various improvements were made to the car in accordance with changes in the production model. The 2001 Impreza adopted a four-door sedan body and first showed itself at the season opener, the Monte Carlo Rally. The unique appearance of the car was highlighted by small compound headlights, spoiler attached to the extreme rear and blister-style fenders. The engine underwent extensive tuning in an effort to boost responsiveness, and major progress was made in regards to electronic control of the semi-automatic transmission and front, center, and rear differential gearing. Subaru's ace driver, Richard Burns, was accompanied by Markko Martin, Petter Solberg, and Toshihiro Arai.  
31,99 €
inkl. Mwst. zuzüglich Versandkosten

1:32 Bo.F-15E Strike Eagle Bunker Buster

Art.Nr.: 300060312 Artikelbezeichnung: 1:32 Bo.F-15E Strike Eagle Bunker Buster About the Boeing F-15E Strike Eagle w/"Bunker Buster" The McDonnell Douglas F-15 Eagle is regarded as one of the most capable twin-engine air-superiority fighters in the world today. Ever since its maiden flight in July 1972, this record breaking Mach 2.5 fighter has been a yardstick for jet fighter design. In the early 1980's, the Air Force requested McDonnell Douglas to modify their F-15 fighter into a dual-role aircraft to be known as the F-15E "Strike Eagle" for use as an air-to-air fighter, and for air to ground attack missions. This new version was designed to penetrate deep into enemy territory unescorted, and strike military targets with pinpoint accuracy. The strike eagle employs two highly reliable Pratt & Whitney F100-PW-229 engines and was designed specifically as a two-person crew of pilot and weapons system officer. The LANTRIN (Low Altitude Navigation and Targeting Infra-Red for Night) system enables the Strike Eagle to operate at night and in bad weather. The Strike Eagle can also be employed with up to an 11-ton payload and can carry the GBU-28 Bunker Buster, a guided bomb developed to destroy strengthened underground bunkers. The Strike Eagle was first deployed in December 1989. During the Gulf War in 1991, 2 squadrons of 48 F-15E Strike Eagles demonstrated their power as multi-purpose fighter/attack planes. About the model The popular F-15E Strike Eagle (item 60302) was released in 1993. However, since this items release, the F-15E has come to be equipped with a variety of newly developed weapons systems. Following the changes in times and aviation fighting technology Tamiya has modernized its kit to feature accurate replicas of all the latest weapons systems employed by the F-15E Strike Eagle. Includes parts for replication of the GBU-28 "Bunker Buster", as well as AGM-130 and JDAM guided bombs, and ARAAM air-to-air missiles. 1/32 scale, total length 600, total width 404mm. Faithful
129,99 €
inkl. Mwst. zuzüglich Versandkosten

1:32 F-4E PHANTOM II EARLY PROD.

Art.Nr.: 300060310 Artikelbezeichnung: 1:32 F-4E PHANTOM II EARLY PROD. About the McDonnell Douglas F-4E Phantom II Early Production The F-4E came into production as an improved version of the F-4C/D and was to be the most advanced model of the Phantom series. After elongating the fighter's nose and installing a more compact radar, the solid-state Westinghouse AN/APQ-120, the installation of a nose-mounted gun became possible and a 20mm M61A1 6 barrel Vulcan gun pod was employed. The Vulcan 20mm cannon, with its ammunition drum of approximately 640 rounds, was capable of firing 4000-6000 rounds a minute and proved reliable in air-to-ground and close quarters aerial combat. F-4E made its first flight in June 1967 and entered the rising conflict of the Vietnam War in November 1968 when the first F-4E's reached Korat in Thailand and joined up with the 469th Tactical Fighter Squadron. By the time of the cease-fire of 1973 the F-4E was credited with a total of 21 MiG kills, 5 brought down by gunfire alone. About the Model •Assembly kit of the early production version of the F-4E Phantom II main fighter of the U.S. Airforce. •Scale: 1/32, fuselage length: 600mm, wingspan: 368mm. The intrepid form of the F-4E Phantom with its characteristically elongated nose, has been accurately reproduced. •Fuselage has been molded as one piece with intricate areas faithfully recreated. Main pieces can be fastened to fuselage with screws. •Plane's nose can be reproduced with clear parts to allow viewing of the details of the 20mm M61A1 6 barrel Vulcan gun pod and AN/APQ-120 radar after model assembly. •Exquisite detail of cockpit and instrument panels portrayed in superb detail. Canopy can be assembled in the open or closed position. •Landing gear reproduced with dye-cast parts and tires are recreated with real rubber. •Parts for recreation of full armament, such as air-to-air missiles, are included in kit. Kit also features pilot and co-pilot figures as well as decals for replication of
142,99 €
inkl. Mwst. zuzüglich Versandkosten

1:32 Lockheed Mar.F-16CJ Fighting Falcon

Art.Nr.: 300060315 Artikelbezeichnung: 1:32 Lockheed Mar.F-16CJ Fighting Falcon Die F-16CJ wurden abgestellt, um im Anschluss an den Golfkrieg über der Flugverbotszone zu patrouillieren und 2003 nahmen mehr als 70 F-16CJ an der Operation Freiheit für den Irak teil. Sie hatte einen F110-GE-129 Triebwerk, mit der sie eine Mach 2,0 Höchstgeschwindigkeit erreichen kann.
149,99 €
inkl. Mwst. zuzüglich Versandkosten

1:32 Mc Donnell DOUGLAS F-15 EAGL

Art.Nr.: 300060304 Artikelbezeichnung: 1:32 Mc Donnell DOUGLAS F-15 EAGL About the McDonnell Douglas F-15C Eagle At one time during the missile boom years, the U.S. Air Force believed future air battles could be decided by air-to-air missiles rather than guns in the traditional dog-fighting manner. The need for air superiority weapons was relearned during the Vietnam Conflict and led to an Air Force requirement for an all-weather, single-seat, twin-engined fighter. This aircraft was to optimize counter-air operations. The U.S. Air Force requested several manufacturers to study and develop prototypes during the late 1960's under the FX program (Fighter Experimental). McDonnell Douglas was awarded a contract to develop the F-15 Eagle jet fighter in December 1969. The Eagle's advanced aerodynamic design greatly reduced drag at both the low and high lift configurations, and achieved superior maneuverability during varying flight conditions. Making its maiden flight in July 1972, it was deployed in November 1974 as the F-15A Eagle, and had been in active service since then. It is powered by two Pratt & Whitney F100 afterburning turbofan engines developed exclusively for the for the F-15, and is capable of speeds in the Mach 2.5 range. The F-15 can carry a heavy load of devastating weapons, including the internally mounted 20mm M61A-1 Vulcan cannon, with 940 rounds of ammo, the AIM-7 Sparrow radar guided missile and AIM9 Sidewinder short range air-to-air missile. In 1979 an upgraded version of the Eagle was introduced as the F-15C. One notable change was the increase in fuel capacity, but even more fuel was made possible by the conformal fuel tanks, which snuggle between the wings and up against the jet inlet ramps. This increase in fuel capacity enables the Eagle to expand long range operations, such as escorting AWACS and strike aircraft to their targets. The Landing gear has been reinforced to accept the extra fuel weight, allowing a maximum take-off weight of 68,000 lbs (30844 kg). The F
112,99 €
inkl. Mwst. zuzüglich Versandkosten

1:32 Mc Donnell Douglas F-4J Phantom II

Art.Nr.: 300060306 Artikelbezeichnung: 1:32 Mc Donnell Douglas F-4J Phantom II Da die F-4J für die U.S. Navy parallel zur F-4D für die Air Force entwickelt wurde, wiesen die beiden nur wenig Unterschiede auf. Das neue J79-GE-10 Triebwerk wurde zur Leistungserhöhung wieterentwickelt. Im Inneren wurde ein aufgewertetes Radar mit einem verbessertem Feuerleitsystem und einem neuen Raketensteuersytem eingebaut.
114,99 €
inkl. Mwst. zuzüglich Versandkosten

1:32 Mc Donnell F4 C/D PHANTOM II

Art.Nr.: 300060305 Artikelbezeichnung: 1:32 Mc Donnell F4 C/D PHANTOM II About the McDonnell F-4C/D Phantom II In May 1958, the McDonnell F4H-1 Phantom II prototype was rolled out of their facility at Lambert Field, St. Louis, Missouri. It was a very large aircraft for a fighter and it was not very pretty by aviation standards. It looked like some giant had stepped on its nose and kicked it in the tail; however, it flew on the 27th of that month and is still flying today, 5,195 Phantoms later. From these beginnings until well into the 1970's the F4 Phantom II would be the primary fighter aircraft of the free world. By 1982 the F4 had fought in 5 major conflicts, nine years in Southeast Asia, twice in the desert of the Middle East and against each other at one time. It was used in every role; Fighter interceptor, Fighterbomber, Reconnaissance, Tanker and Drone. They specialized in attack roles as Wild Weasel defense suppression and laser designator bombers. They also defeated the best aircraft that the opposition could put against it. The only time it lost was when pitted against another F4, during the Greek-Turkey conflict. With the U.S. Navy in the headlines everyday with this new interceptor, the American Defense Department ordered competitive tests be flown against the best aircraft in the U.S. Air Force inventory. Convair's F-106 Delta Dart was selected to fly against the Navy's Phantom II, and the Phantom easily won top speed, low-level speed, altitude, plus the unrefueled range and radar range. Following this flyoff, much to the disgust and embarrassment of the Air Force, it was decided that the next Air Force fighter would be this U.S. Navy design. It would at first supplement, then totally replace the Air Force F100; F102; F104 and F105 strike and interceptor aircraft. Under the designation F110A, the Air Force Phantom II was basically a Navy-4B airframe with changes made to meet Air Force requirements. Following the F-4C, which was essentially the same aircraft as the designated F110A, the
112,99 €
inkl. Mwst. zuzüglich Versandkosten

1:32 Mits.A6M2b ZERO Fighter 21

Art.Nr.: 300060317 Artikelbezeichnung: 1:32 Mits.A6M2b ZERO Fighter 21 About the Mitsubishi A6M2b Zero Fighter Model 21 (Zeke) The Japanese Zero Fighter plane was widely feared and respected by friend, foe and all who came into contact with it. A triumph of aerodynamic engineering and military science, the Zero Model 21 served in the skies across East Asia during early stages of World War II, contributing immensely to the Japanese war effort. It remains today an enduring symbol of that fierce and globe-spanning conflict. About the model •1/32 scale assembly kit of the Model 21 Zero Fighter. Length: 283mm, Width: 375mm. •Accurately reproduced curved cowling and fuselage are modeled from slide molding to accurately depict rivets and surface texture. •Realistically replicated Nakajima "Sakae" type 12 engine features propeller reduction unit, exhaust pipe and other detailed parts. •Both folded and extended wing tips included and can be used interchangeably even after assembly. •Durable and precision detailed metal parts depict landing gear system and pitot tube. •Seat belt incorporates photo-etched parts for extra realism. •Retractable landing gears increase display possibilities, while allowing model to be easily stored in package after assembly. •Features movable landing gears, rudder and flaps. •Includes standing and seated pilot figures and seven types of markings for planes which participated in Pearl Harbor attack. •Includes parts to depict any variation of Mitsubishi and Nakajima-built Zero Model 21. •Comes with wheel chocks and access steps. Includes posable display stand.
119,99 €
inkl. Mwst. zuzüglich Versandkosten

1:32 US VOUGHT F4U-1D Corsair

Art.Nr.: 300060327 Art.bezeichnung: 1:32 US VOUGHT F4U-1D Corsair This is the D variant of the popular Corsair World War II fighter plane. It uses new parts to recreate features specific to the F4U-1D, which was the first Corsair to be cleared for use on aircraft carriers. This fighter-bomber could carry drop tanks on new hard points under the wing root, and up to 8 rockets under the outer wing. It provided invaluable close support for ground troops during landings in places such as the Philippines and Okinawa, and continued to serve after WWII, in Korea. F4U-1D Specific Detail differences from previous variants: 1. The semi-bubble canopy was altered during production to remove upper side frames and improve visibility. 2. Propeller blades were thicker from the root. 3. Hardpoints under the wing root allowed carrying of bombs and drop tanks. 4. The tail wheel cover had a new fairing to improve aerodynamics. 5. Outer wing sections had extended metal areas with mounts for eight rockets total. 6. Cockpit floor window was scrapped.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
144,99 €
inkl. Mwst. zuzüglich Versandkosten

1:32 WWII North American P-51D Mustang

Art.Nr.: 300060322 Artikelbezeichnung: 1:32 WWII North American P-51D Mustang The P-51 Mustang is considered by many to be the best fighter aircraft of WWII. The P-51 Mustang came about when the British Purchasing Commission asked North American Aviation to produce the Curtiss P-40 for the RAF, but North American stated they could build something better. The P-51D is considered by many experts to be the definitive variant of the Mustang as it was the most widely produced. It featured a bubble canopy which gave the pilot superb all-round visibility as well as a heavier armament of six 12.7mm machine guns. Wing racks allowed the carriage of drop tanks to extend range or bombs for ground attack. P-51Ds were instrumental in helping the Allies gain air superiority over Europe, and after Germany's defeat, they continued their role as long-range escorts for B-29s attacking Japan. Many also saw service during the Korean War as fighter-bombers and a few even continued to serve with air forces of less developed nations until the 1980s.
119,99 €
inkl. Mwst. zuzüglich Versandkosten
inkl. Mwst. zuzüglich Versandkosten

1:35 Brit. KPz Challenger 2 Wüste (2)

Art.Nr.: 300035274 Artikelbezeichnung: 1:35 Britischer Kampfpanzer Challenger 2 Wüste (2) Das Modell Britischer Kampfpanzer Challenger 2 Wüste im Maßstab 1:35 hat eine Länge von 334 mm. Im Vergleich zum Chellenger 1 MBT, der während des Golfkriegs im Einsatz war, verfügt der Challenger 2 über die verbesserte zweite Generation der Chobham Panzerung und über eine neue 120mm L30 gezogene Hauptkanone. Über 120 Challenger 2 wurden im Frühjahr 2003 bei der Operation Telic im Irak eingesetzt.
60,99 €
inkl. Mwst. zuzüglich Versandkosten

1:35 Diorama-Set Haustiere (18)

Art.Nr.: 300035128 Artikelbezeichnung: 1:35 Diorama-Set Haustiere (18) In einer bisher unerreichten Vielfalt zeigt TAMIYA hier Plastikmodelle, die in ihrer Ausführung, Detaillierung, Konstruktion und Passgenauigkeit ihresgleichen suchen. Diese Modelle halten jeder Qualitätsprüfung stand und geben Einblick in Waffentechnik und Entwicklung. 43 Bauteile
7,99 €
inkl. Mwst. zuzüglich Versandkosten

1:35 JGSDF KPz Typ 90 m.Lademann.(7)

Art.Nr.: 300035260 Art.bezeichnung: 1:35 JGSDF KPz Typ 90 m.Lademann.(7) In 1996, Tamiya"s 1/35 scale Japan Self Defense Force Type 90 tank (item 35208) was first released. 4 years later, the Type 90 w/ Mine Roller (item 35236) was released. In the year 2000 Tamiya recreated part of the Type 90"s automatic loading device, and added figures for a limited model for event purposes. Based on the popularity of this model Tamiya has decided to at last make this Type 90 Tank w/ Ammo-Loading Crew a full-fledged addition to the Military Miniature Series. This set including a Type 90 tank and figures is ideal for making dioramas. This set also features parts to represent the automatic ammo-loading system of the Type 90 tank, which can be assembled with great ease. Five figures, 2 types of shells and shell cases are also part of the kit.
41,99 €
inkl. Mwst. zuzüglich Versandkosten

1:35 Rus. Mitl.KPz T-55 A (1)

Art.Nr.: 300035357 Artikelbezeichnung: 1:35 Rus. Mitl.KPz T-55 A (1) Der Russischer T-55A ist eine verbesserte Version der T-55, ausgerüstet mit einer strahlungsdämmenden Auskleidung innen und ein auf dem Turm montiertes Maschinengewehr als Antwort auf die Bedrohung durch Panzer bekämpfende Hubschrauber. Er verfügt außerdem über eine D10T100mm Hauptkanone Kaliber 56. Mit 1 Figur.
42,99 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII Brit. Pz. Matilda Mk.III/IV(3)

Art.Nr.: 300035300 Artikelbezeichnung: 1:35 WWII Brit. Pz. Matilda Mk.III/IV(3) At the beginning of 1930, the British army made the decision to produce tanks for different roles, with production of the A12 "Matilda" beginning in 1936. At that time, the Matilda had the thickest armor at 60mm, came armed with a 2-pounder cannon, and had thick side skirts which protected the "Japanese type" bogies. Powered by two diesel engines, the Matilda had a top speed of 24km/hr which was deemed appropriate as it matched the walking speed of infantry. At the North African front, thanks to its impenetrable armor, the Matilda completely defeated the opposing Italian forces. Because of the strength of their armor, the Germans began to use 88mm guns which were the only weapons that could penetrate the Matilda. The Matilda was used throughout WWII and was also used by Soviet, Australian, and Allied forces under the Lend-Lease Act. •This is a 1/35 assembly kit model of the British Infantry Tank Matilda which saw action atthe North African Front during WWII. •Length: 174mm, Width: 72mm. •The Matilda's mechanical form has been accurately reproduced. •The number of parts required for the assembly of the gun turret, hull, and the complicated suspension has been minimized for ease of assembly. •Tall and short cupolas and two types of antennas are included in the kit. •Assembly and belt type tracks are included. •Full-size commander figure, as well as a loader and driver torso figures are included.(Total 3) •3 kinds of decals for the North African front are included. •The Matilda would look fantastic alongside other 1/35 vehicles from the North African front such as German Armored Car Sd.Kfz.223 (Item 35268), German Kubelwagen Type82 (Item 35238), German Armored Car Sd.Kfz.222 (Item 35286), Italian Medium TankCarro Armato M13/40 (Item 35296).   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
49,99 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII Brit.Transporter Leicht 10PS

Art.Nr.: 300035308 Artikelbezeichnung: 1:35 WWII Brit.Transporter Leicht 10PS British forces used passenger car chassis, during WWII, as the basis for pick-up style military vehicles. Officially identified as a "Light Utility Car" soldiers called them affectionately by the nickname "Tilly". The vehicle was equipped with a 30hp engine and rear wheel-drive. However, the car did not have sufficient off-road abilities and was soon replaced by 4WD vehicles. As a result, the "Tilly" was used in airbases for liaisons and in other paved areas. The vehicle served in the Dunkirk evacuation, North African and Italian fronts, and Europe from the Normandy invasion on.
32,99 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII Diorama-Set Zelt m. Funk (1)

Art.Nr.: 300035074 Artikelbezeichnung: 1:35 WWII Diorama-Set Zelt m. Funk (1) In einer bisher unerreichten Vielfalt zeigt TAMIYA hier Plastikmodelle, die in ihrer Ausführung, Detaillierung, Konstruktion und Passgenauigkeit ihresgleichen suchen. Diese Modelle halten jeder Qualitätsprüfung stand und geben Einblick in Waffentechnik und Entwicklung. Mit 1 Figur.
6,19 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII Dt. Steyr Typ 1500A Komman.(2)

Art.Nr.: 300035235 Artikelbezeichnung: 1:35 WWII Dt. Steyr Typ 1500A Komman.(2) Der in Österreich hergestellte Steyr Typ 1500A war 1,5 Tonnen schwer. Er besaß einen luftgekühlten Steyr 3,5-Liter V8 Motor mit 85 PS und einer Höchstgeschwindigkeit von 100 km/h. Die Kraftübertragung für den Vierrad-Antrieb basierte auf einem Getriebe mit vier Vorwärtsgängen und einem Rückwärtsgang.
32,99 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII Dt.3,7cm Flak37 m. Trupp (5)

Art.Nr.: 300035302 Artikelbezeichnung: 1:35 WWII Dt.3,7cm Flak37 m. Trupp (5) First released in 1989, Tamiya's mechanically detailed 1/35 3.7cm Flak 37 became a very popular item and often appeared in dioramas as a supporting piece. Fans have long awaited the release of this kit with anti-aircraft crew figures, and a collaboration with ICM has made this possible. A diorama depicting the crew shooting at a low flying approaching fighter aircraft can now be accurately portrayed with this set. The set features excellently proportioned figures with sharp details. •Set includes 5 crewmen figures: A commander looking into binoculars, a gunner,a spotter with rangefinder, and two loaders. •Displaying this set with other 1/35 scale military figures and vehicles would definitely addexcitement to any diorama. •Add greater realism to these figures with the WWII German Military Insignia Decal Set(Item 12625).
34,49 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII Fig-Set Brit.Infant.Patrol.(5)

Art.Nr.: 300035223 Artikelbezeichnung: 1:35 WWII Fig-Set Brit.Infant.Patrol.(5) Fünf Britische Soldaten der Infanterie auf Patroille mit Zubehör.
11,49 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII Tiger I Init./Frühe Produktion

Art.Nr.: 300035227 Artikelbezeichnung: 1:35 WWII Tiger I Init./Frühe Produktion In einer bisher unerreichten Vielfalt zeigt TAMIYA hier Plastikmodelle, die in ihrer Ausführung, Detaillierung, Konstruktion und Passgenauigkeit ihresgleichen suchen. Diese Modelle halten jeder Qualitätsprüfung stand und geben Einblick in Waffentechnik und Entwicklung.
46,99 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII US Ford GPA Amphibien-Fhz. (3)

Art.Nr.: 300035336 Artikelbezeichnung: 1:35 WWII US Ford GPA Amphibien-Fhz. (3) The Ford GPA was a unique vehicle which was deployed not only on the U.S. side by the Army and Marine Corps, but also later by Russian forces. It was often called a "seep" (an abbreviation of "seagoing jeep") on account of its amphibious nature. The front-engine 4WD vehicle shared much of its design and parts (including the engine) with Ford's GPW. Around 12,800 units were produced by 1943. This kit includes a variety of new parts to update Item 35043 U.S. Amphibian Ford GPA Kit.
33,99 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII Zimmerit Dekor-Satz Elefant

Art.Nr.: 300012644 Artikelbezeichnung: 1:35 WWII Zimmerit Dekor-Satz Elefant Mit dem detaillierten Fotoätzteile-Zimmerit-Set für den schweren Kampfpanzer „Elefant" verleihen Sie Ihrem Modell auf einfache und komfortable Art und Weise ein vorbildgetreues Erscheinungsbild. Es sind zwei unterschiedliche Zimmeritmuster enthalten, um die Varianten des Bausatzes passend zu zeigen. Passend zu folgenden Modellen: N° 300035325 Schwerer Kampfpanzer Elefant WWII Lieferumfang: Zimmerit-Set 1:35
9,59 €
inkl. Mwst. zuzüglich Versandkosten

1:35 Zimmer. Ph.Ätzt. F.Panzer IV Ausf.J

Art.Nr.: 300012650 Artikelbezeichnung: 1:35 Zimmer. Ph.Ätzt. F.Panzer IV Ausf.J Mit dem detaillierten Fotoätz-Zimmerit-Set für den Panzer IV Ausf. J verleihen Sie Ihrem Modell auf einfache und komfortable Art und Weise ein vorbildgetreues Erscheinungsbild. Passend zu folgenden Modellen: N° 300035181 German Panzer IV Ausf. J Lieferumfang: Zimmerit-Set 1:35
12,19 €
inkl. Mwst. zuzüglich Versandkosten

1:350 WWII Jap. Schwerer Kreuzer Chikuma

Art.Nr.: 300078027 Artikelbezeichnung: 1:350 WWII Jap. Schwerer Kreuzer Chikuma This is a highly detailed scale model replica in 1/350 scale of the Japanese Heavy Cruiser Chikuma. Historical background Chikuma was the last heavy cruiser the Imperial Japanese Navy constructed during WWII and was completed in May 1939 as the second ship of the Tone-class. Her four twin 20.3cm guns were located at the bow to enable unhindered operation of up to 6 floatplanes at the stern. Her design also enabled a top speed of 35 knots and a long range. She was assigned to the Carrier Mobile Fleet with her sister ship Tone. During the Pearl Harbor Attack in December 1941, her floatplanes carried out pre-attack reconnaissance over the Pearl Harbor, which greatly contributed to the IJN's success of the operation. She was also active during the Battle of Midway and the Solomon Islands campaign. During the Battle of the Leyte Gulf in October 1944, she was the flagship of Admiral Kurita's fleet and contributed to the sinking of the USS Gambier Bay but she was in turn damaged by torpedoes and scuttled off the coast of Samar Island.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
129,99 €
inkl. Mwst. zuzüglich Versandkosten

1:350 WWII Japanisch.Zerstörer Yukikaze

Art.Nr.: 300078020 Art.bezeichnung: 1:350 WWII Japanisch.Zerstörer Yukikaze January 20 1940 saw the completion of construction of the Japanese Kagero class destroyer. Along with her sister ships Hatsukaze, Amatukaze, and Tokitukaze, she became part of the 16th destroyer division under the command of the light cruiser Jintsu. At the beginning of WWII, the 16th destroyer division was part of the force which captured the Philippines, and on December 5 1941, she took part in the fierce fighting with American forces near Palau and supported the invading forces at Legazpi. After wards, she saw action throughout the Pacific Ocean at the Dutch East Indies, Midway, Guadalcanal, and the Solomon Islands. The Yukikaze also participated in the withdrawal of Guadalcanal,also participated in sea battles at the Marianas and the Leyte Gulf. Throughout WWII, the Yukikaze took part in numerous naval battles, escort duties, and supply runs, and always returned safely from each sortie. She was among the few Japanese warships and the onl yone of her class still operational at the end of the war, and can be called the "lucky destroyer." As part of the post-war reparation agreement, the Yukikaze was transferred to the Republic of China, and in 1966 she became a reserve training ship. This is a 1/350 full display model. Model depicts the Yukikaze as she appeared during the 1945 Ten Ichi Go operation (Battle for Okinawa). Parts included to build a waterline model or a display model with full hull. It is possible to rotate the guns and torpedoes after assembling thanks to polycaps. ABS has been used for the masts to ensure strength. Photo-etched parts are prepared for the ladders, radio antennas etc. Metal chains. Display stand included. Assembled model can be displayed in the package.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
81,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 Dt.Focke Wulf Fw190 D-9

Art.Nr.: 300061041 Art.bezeichnung: 1:48 Dt.Focke Wulf Fw190 D-9 About the Focke-Wulf Fw190 D-9 Following the successful entry of the Focke-Wulf Fw190A series of fighter aircraft over the English channel during the autumn of 1941, the German RLM requested high altitude version to complement the fighter fleet, and three projects were started. The Fw 190B used the B.M.W. 801 turbosupercharged radial engine and a pressurized cockpit, but very few of these were built. The Fw190C was powered by a 1,750hp Daimler Benz DB603A in-line engine, of which three prototypes were built. The third high altitude project was based on the Focke Wulf Fw190A airframe and powered by a Junkers engine. The fuselage was lengthened to accommodate the V-12 cylinder, liquid cooled, 1,750hp Jumo 213 engine, and made its initial flight during the winter of 1941 - 42. Five further prototypes were produced, plus small batch of Fw 190 D-Os were completed from standard production Fw 190A-7 airframes. These pre-production aircraft were followed by the Fw190 D-2 through D-8 designations. The Fw 190D-9 began production in June 1944, with early versions having the flat topped canopy, and from W. Nr. 210002 onwards having the Galland hood (blown canopy). It went into combat with the III/JG 54 "Grunherz" (Green Hearts) in September 1944, at Achmer, Germany, as top cover for the new Messerschmitt Me262 Jet fighters then entering service.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
27,49 €
inkl. Mwst. zuzüglich Versandkosten

1:48 Lockheed Martin F-16C Block 25/32

Art.Nr.: 300061101 Artikelbezeichnung: 1:48 Lockheed Martin F-16C Block 25/32 About the F-16C Block 25/32 The F-16 has become one of the most widely-used jet fighters in the world, and has therefore undergone a series of upgrades throughout its service life with various air forces. The Block 25entered service in 1984 and featured upgraded radar and cockpit avionics. The Block 32 was the first upgrade affected by a program to use different engines in the F-16, and continued to use Pratt & Whitney engines, while the Block 30 used engines made by General Electric. The Block 32 has been upgraded to carry a wide range of weapons, including the LITENING II laser targeting pod, which enables precision attack capability with laser-guided bombs. About the Model - Model represents the F-16C [Block 25/32]. New parts accurately reproduce the correct engine nozzle and smaller air intake that correspond to Pratt & Whitney powered F-16s. - Main landing gear and gear well covers also depicted with new parts. - Wing reinforcement plates for Block 32 recreated with phot etch parts (sold seperatley). - Extensive weapons set features AIM-9L/M and AIM-9X sidewinders, AIM-120 AMRAAM, wing and centerline fuel tanks, and LITENING II targeting pod. - New parts for GBU-12 laser-guided bombs feature clear parts to depict the laser guidance package for a more realistic finish. - New ordinance racks on the wings accurately match their respective weapons. - 1 pilot figure included and 3 sets of U.S. Air National Guard markings included. - Add ITEM 12621 F-16 Fighting Falcon Detail Up Parts Set for the ultimate finish.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
69,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 RAF De Havilland Mosquito Mk.6

Art.Nr.: 300061062 Art.bezeichnung: 1:48 RAF De Havilland Mosquito Mk.6 Nicknamed "The Wooden Wonder" due to its nearly all-wood construction, the de Havilland Mosquito was initially conceived as a fast, unarmed bomber and went on to serve in that and many other roles during WWII. This kit depicts the NF Mk.II nightfighter and FB Mk.VI fighter-bomber variants which were introduced in Spring 1942 and Spring 1943 respectively. Parts are included for the NF Mk.II's nose- and wing-mounted radar antenna as well as 500lb bombs and rockets for the FB Mk.VI. The bomb bay may be fitted with bombs and also features details for the fuel tank and 20mm cannon magazines. Two pilot figures and three marking options are included.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
28,49 €
inkl. Mwst. zuzüglich Versandkosten

1:48 US Rep. P-47D Thunderbolt Bubblet

Art.Nr.: 300061090 Artikelbezeichnung: 1:48 US Rep. P-47D Thunderbolt Bubblet Er war mit einem R-2800-59 Mototr ausgestattet, der eine Wassereinspritzung besaß und damit im Notfall beim Kampfeinsatz bis zu 2.300 PS leisten konnte. Führungsschächte seitlich und unterhalb im Rumpf zum Anschluss des Turboladers, welcher hinter dem Pilotensitz eingebaut war, trugen zum wuchtigen Aussehen des Flugzeugs bei.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
45,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 WWII British M10 IIC Achilles

Art.Nr.: 300032582 Artikelbezeichnung: 1:48 WWII British M10 IIC Achilles Britain was supplied with a number of American M10 tank destroyers under the Lend-Lease programme. The M10 was based upon the famed M4 Sherman tank, but with lighter and more highly sloped armor which allowed the M10 to reach higher speeds. The British switched the original U.S. 3-inch gun with their own powerful 17-pounder on over 1,000 M10s, changing the name to IIC, or sometimes "Achilles". While the new gun required a muzzle brake to be fitted onto the vehicle, other modifications were limited to thicker front and side armor, plus a turret-top shield. With this year marking the 70th anniversary of the D-Day operations, the Achilles provides a timely new face for the 1/48 Military Miniatures series. About the Model • This is a 1/48 scale plastic model assembly kit. Length: 152mm, width: 63mm. • The form of the Achilles with British 17-pounder gun and characteristic "duck bill" muzzle brake is faithfully recreated. • The model depicts a late production version of the tank destroyer with suspension bogies raised upon support roller brackets. • The open top fighting department is authentically reproduced using a limited number of parts. • Includes markings to recreate an Achilles which took part in the Normandy landings that were central to the D-Day operation. • Features a plastic lower hull. .
24,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 WWII Diorama-Set Feld-Instandsetz.

Art.Nr.: 300032547 Artikelbezeichnung: 1:48 WWII Diorama-Set Feld-Instandsetz. Tamiya provides more 1/48 scale diorama options for military modellers everywhere with the release of this extensive figure and accessory set. Match them with any of our large lineup of 1/ 48 MM German vehicles to add more life to your display. About the Model High quality 1/48 scale German army figure and accessory set. Set includes 9 figures doing various tasks in realistic standing and kneeling poses. Ammunition loading - 4 figures Tire repair - 1 figure Engine maintenance - 2 figures Painting - 1 figure Supervisor - 1 figure Large selection of accurately reproduced accessories and tools included. 88mm ammunition for King Tiger (x2) Wooden case for 88mm ammunition for King Tiger (x2) 88mm ammunition for Tiger I (x4) Wooden case for 88mm ammunition for Tiger I (x2) 75mm ammunition for Panther (x2) Wooden case for 75mm ammunition for Panther (x2) 75mm ammunition for Pz.kpfw.IV (x4) Wooden case for 75mm ammunition for Pz.kpfw.IV (x2) Oil drum (x2) 1 each of the following accessories: Tool Kit, Ladder, Burner, Tool Bag, Wooden Crate, Hammer, Bucket, Jack Crank, Jack, Anvil, Vise, Open Tool Box, Closed Tool Box, Oil Siphon, 18 Liter Can
17,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 WWII Dt.Schwimmwagen Typ166 Pkw.K2

Art.Nr.: 300032506 Artikelbezeichnung: 1:48 WWII Dt.Schwimmwagen Typ166 Pkw.K2 Der Typ 166 besaß ein wasserdichtes Chassis und einen im Heck eingebauten, luftgekühlten 4-Zylinder Motor von 1.130 cm³ und 25 PS, womit er in der Lage war auf dem Lande eine Spitzengeschwindigkeit von 80km/h zu erreichen. Im Wasser wurde das Fahrzeug von einer Schiffsschraube bewegt und konnte Geschwindigkeiten bis 10km/h erreichen.
17,29 €
inkl. Mwst. zuzüglich Versandkosten

1:48 WWII Figuren-Set Dt.Infa.Manöv.(15)

Art.Nr.: 300032530 Art.bezeichnung: 1:48 Figuren-Set Dt. Infa. Manöver (15) Our latest 1/48 scale figure set features WWII German soldiers in relaxed poses, standing, walking, wearing field caps and with weapons shouldered. Also includes figures depicting tank crew at rest. 2 all-new officer figures and military policeman, which are available now for the first time in any scale, are also included. This set is perfect for modeling non-combat scenes and dioramas of life behind-the-lines. Set includes 7 machine gun crew on maneuvers, 2 standing infantry, 3 tank crew, 2 officers and 1 military policeman for a total of 15 figures. Infantry figures feature realistic M43 field uniforms. Includes separately molded weapons and equipment such as machine gun tripod mount.
11,79 €
inkl. Mwst. zuzüglich Versandkosten

1:48 WWII US Willys Jeep m.Fig.-Set (9)

Art.Nr.: 300032552 Artikelbezeichnung: 1:48 WWII US Willys Jeep m.Fig.-Set (9) Following the release of ITEM 32547 WWII German Tank Crew Field Maintenance Set, Tamiya is now planning another substantial figure and accessory set to add to our 1/48 MM lineup. This set will feature several U.S. infantry figures in life-like poses and an assortment of accessories that can be used to liven up any diorama.
29,99 €
inkl. Mwst. zuzüglich Versandkosten

1:6 Honda Gorilla Spring Collection

Art.Nr.: 300016031 Artikelbezeichnung: 1:6 Honda Gorilla Spring Collection Im August 1978 brachte Honda Gorilla auf dem Markt. Das Herz des Motorrads ist ein luftgekühlter 4-Takt OHC Einzylinder mit 49cm³. Er Schafft 3,1 PS bei 7.500 Umdrehungen pro Minute und 3,2 Nm bei 6.000 Umdrehungen pro Minute.  
61,99 €
inkl. Mwst. zuzüglich Versandkosten

1:6 Honda Monkey 2000 Anniversary

Art.Nr: 300016030 Artikelbezeichnung: 1/6 Honda Monkey 2000 Anniversary About the Honda Monkey 2000 Anniversary It was back in 1961 that a curious mini-motorcycle was seen putting around Honda's "Tama Tech" amusement park. One of the most popular rides in the park, it sported a red frame under a white gas tank, tiny 5 inch tires and a peppy 50cc engine. Riders were said to appear, of all things, simian, and henceforth the motorcycle came to be known as the Honda Monkey. Looking more like a toy than a motorcycle, the compactness and fresh appearance of the Monkey scored high with fans of all ages. Honda revamped the Z100 park version for use on public roads, and brought out the CZ100 model which began to be exported in 1963. The first model to be marketed in Japan was the improved Z50M Monkey, which featured folding handlebars and seat for easy stowing in a passenger car. In January 2000, Honda brought out the 2000 anniversary edition of the Monkey, which sported the image coloring of the 1971 Z50Z(2) model. The production of this special Monkey was limited to 3000 motorcycles. The continued appeal of the Monkey must be both its diminutive size and ease of customization. Each Monkey owner is free to interchange any number of components including the engine parts, carburetor, exhaust pipe and suspension. In fact, over 1500 custom parts are marketed for this playful mini-bike.
66,99 €
inkl. Mwst. zuzüglich Versandkosten

1:6/1:12/1:24 0,8x2,0mm Gewebeschl. 1m

Art.Nr.: 300012662 Art.bezeichnung: 1:6/1:12/1:24 0,8x2,0 mm Gewebeschlauch 1m Attention static car and motorcycle modellers! These products are perfect for recreating braided hoses which are commonly used as brake lines, fuel pipes etc. on real life vehicles. The surface texture is artfully depicted using interior rubber tubing wrapped with thread. Simply attach to your model to raise the detail even further! .
5,39 €
inkl. Mwst. zuzüglich Versandkosten

1:6/1:12/1:24 Carbon Dekor Glatt/Fein

Art.Nr.: 300012679 Artikelbezeichnung: 1:6/1:12/1:24 Carbon Dekor Glatt/Fein Carbon weave decals are a great way to enhance your models level of realism. Many of Tamiya’s car and motorcycle subjects have parts that depict raw carbon parts, such as winglets, spoilers, and body panels. With Tamiya carbon fiber decal sheets, you can easily replicate these parts on your model with relative ease. Simply cut to the size and shape of the section that you want to cover, and apply. When used in conjunction with Tamiya MARK FIT and MARK FIT STRONG (Tamiya’s decal setting solution solvents), forming the decal sheet to curved surfaces make application even easier. • Sheet dimension: 130mm x 190mm x1. • Sheet features no pre-marked shapes and can be cut to desired shape and size. • Great for use on static models of bikes, cars and more from 1/6 to 1/24 scale. .
7,59 €
inkl. Mwst. zuzüglich Versandkosten

1:6/1:12/1:24 Carbon Dekor Köper/Ex.Fein

Art.Nr.: 300012682 Artikelbezeichnung: 1:6/1:12/1:24 Carbon Dekor Köper/Ex.Fein Carbon weave decals are a great way to enhance your models level of realism. Many of Tamiya’s car and motorcycle subjects have parts that depict raw carbon parts, such as winglets, spoilers, and body panels. With Tamiya carbon fiber decal sheets, you can easily replicate these parts on your model with relative ease. Simply cut to the size and shape of the section that you want to cover, and apply. When used in conjunction with Tamiya MARK FIT and MARK FIT STRONG (Tamiya’s decal setting solution solvents), forming the decal sheet to curved surfaces make application even easier. • Sheet dimension: 130mm x 190mm x1. • Sheet features no pre-marked shapes and can be cut to desired shape and size. • Great for use on static models of bikes, cars and more from 1/6 to 1/24 scale. .
7,59 €
inkl. Mwst. zuzüglich Versandkosten

1:72 Bf-109 G-6 Messerschmitt

Art.Nr.: 300060790 Art.bezeichnung: 1:72 Bf-109 G-6 Messerschmitt In great news for modelers in the compact 1/72 scale, the "Gustav" is to be released as a Tamiya kit! With over 30,000 produced, the Messerschmitt Bf109 is the most prolifically manufactured fighter in history; of its variants, the G-6 was the most numerous at 13,000 aircraft. In response to improving Allied foes in the air, Bf109 G aircraft had the more powerful DB605 engine, and from the G-6 were equipped with dual 13mm MG131 machine guns that required the distinctive bulges on either side of the cockpit cowling known as "Beule." Some were even given a 20mm cannon gondola under each wing for further improved firepower. The Bf109 G-6 was deployed on both the Western and Eastern fronts, in particular dominating Soviet adversaries as it continued in service through to the end of WWII. About the Model - This is a 1/72 scale plastic model assembly kit. - The striking, refined form of the G-6 variant Bf109 is captured, including depictions of the Beule bulges. - This product takes inspiration from the highly accurate 1/48 model (Item 61117). Please note that engine cowlings are depicted closed. - The cockpit is inserted after left and right fuselage halves have been put together. It has an accurate interior with streamlined assembly. - Canopy can be assembled in open or closed state. - Landing gear struts have a solid attachment point for accurate attachment angle and position. - Comes with optional drop tank parts. - 2 marking options are planned - JG51 (distinctive eye marking on the Beule) and JG54. Detaillierter Plastikmodellbausatzwith   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
23,99 €
inkl. Mwst. zuzüglich Versandkosten
Versandinformation

Wenn Sie diesen Artikel in den Warenkorb legen, ist die Lieferadresse Ihrer Bestellung auf folgende Länder beschränkt:

nach oben