Diese Website verwendet Cookies. Durch die Nutzung der Website stimmen Sie der Verwendung von Cookies zu.
OK
Tamiya CarsonMajoretteDickie ToysSchuco 

1:35 Dt. 7,5cm PAK (40/L46) (3)

Art.Nr.: 300035047 Artikelbezeichnung: 1:35 WWII Dt. 7,5cm PAK (40/L46) (3) In einer bisher unerreichten Vielfalt zeigt TAMIYA hier Plastikmodelle, die in ihrer Ausführung, Detaillierung, Konstruktion und Passgenauigkeit ihresgleichen suchen. Diese Modelle halten jeder Qualitätsprüfung stand und geben Einblick in Waffentechnik und Entwicklung.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
7,39 €
inkl. Mwst. zuzüglich Versandkosten

1:35 Dt. PzKpfw. II C Polen (4)

Art.Nr.: 300035299 Artikelbezeichnung: 1:35 Dt. PzKpfw. II C Polen (4) After WWI, Germany pushed forward with the development of battle tanks under a veil of secrecy. The Panzerkampfwagen II used the Panzerkampfwagen I's hull and came armed with a 2cm main gun. Mass production began in 1937 and various improvements including a new suspension was made. Approximately 1088 Panzerkampfwagen II Ausf.A-C tanks were manufactured up until April 1940. The Panzerkampfwagen II led the surprise attack on Poland and smashed their way throughout Europe. They were later replaced by better frontline tanks but were successfully used in reconnaissance missions until the end of the war. About the Model •This is a 1/35 scale assembly kit model of the German Panzerkampfwagen II tank. •Comes realistically depicted with a hull, turret, and armament as seen at the invasion of Poland. •The 2cm main gun and tank equipment each have a highly detailed finish. •Turret and hull are separately made pieces. •Photo-etched parts accurately depict exhaust cover. •Enhancing the impression of the Panzerkampfwagen is a driver figure and 3 infantry figures (4 figures included). •Assembly-type tracks have a realistic sag effect and feature single-piece straight sections for effortless construction. •3 kinds of markings for the Polish campaign included. •Length: 138mm, Width: 64mm.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
40,99 €
inkl. Mwst. zuzüglich Versandkosten

1:35 Dt. SdKfz.9 Famo m.Tieflader (12)

Art.Nr.: 300035248 Artikelbezeichnung: 1:35 Dt. SdKfz.9 Famo m.Tieflader (12) Das Deutsche 18 Tonnen schwere Halbkettenfahrzeug "FAMO" mit dem Panzertransporter Sd.Ah.116 war eines der Fahrzeuge, welches die defekten Mammut-Geräte von 22-23 Tonnen nach Hause transportieren konnte. Sein Triebwerk war ein Maybach HL 108 12-Zylindermotor, der 270 PS leistete. Länge des Modells: 640 mm 1.087 Bauteile Mit 10 Figuren.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
147,99 €
inkl. Mwst. zuzüglich Versandkosten

1:35 Fig.-Set DAK Luftwaffe Artillerie

Detaillierter Plastikmodellbausatz des Modells Fig.-Set DAK Luftwaffe Artillerie im Maßstab 1:35
14,29 €
inkl. Mwst. zuzüglich Versandkosten

1:35 Fig.-Set Dt. MG Truppen (7)

Art.Nr.: 300035038 Artikelbezeichnung: 1:35 WWII Fig.-Set Dt. MG Truppen (7) In einer bisher unerreichten Vielfalt zeigt TAMIYA hier Plastikmodelle, die in ihrer Ausführung, Detaillierung, Konstruktion und Passgenauigkeit ihresgleichen suchen. Diese Modelle halten jeder Qualitätsprüfung stand und geben Einblick in Waffentechnik und Entwicklung. Mit 7 Figuren.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
6,89 €
inkl. Mwst. zuzüglich Versandkosten

1:35 Franz. SOMUA S35 Mittl. Panzer

Art.Nr.: 300035344 Artikelbezeichnung: 1:35 Franz. SOMUA S35 Mittl. Panzer The SOMUA S35 was a French Cavalry tank of the Second World War. It was manufactured from 1936 until 1940 to equip armored divisions of the Cavalry. For its day it was a relatively agile medium-weight tank, superior in armor and armament to both its French and foreign competitors, such as the contemporary versions of the German Panzerkampfwagen III. It was constructed from well-sloped, mainly cast, armor sections, that however made it expensive to produce and time-consuming to maintain. While not given a chance to show its full effectiveness during the Battle of France in 1940, the SOMUA showed up strongly in a number of battles with German forces and indeed was used by German forces after the French defeat and even by the Allies after the liberation of France in 1944. It was among the first French tanks developed for use as a cavalry tank, as opposed to the previous infantry roles the tank was largely restricted to under French military doctrine. A cast metal body with armor up to 56mm thick gave excellent protection from German guns, and offensively it could rely on a powerful 47mm gun that repeatedly tore through German tanks. All in all, some 430 SOMUA S35s were produced. Detaillierter Plastikmodellbausatz des Modells Franz. SOMUA S35 Mittl. Panzer im Maßstab 1:35
51,99 €
inkl. Mwst. zuzüglich Versandkosten

1:35 Jap. Panzer Type 1 mit 6 Figuren

Art.Nr.: 300035331 Artikelbezeichnung: 1:35 Jap. Panzer Type 1 mit 6 Figuren The Type 1 Self-Propelled Gun was produced from 1943, and around 140 were manufactured. Due to severe damage suffered during their transportation to the front line in the Phillipines, a large number of Type 1s never actually made it into battle, but those that did are said to have been rated highly by the opposing U.S. forces. About the Item • 1/35 scale plastic assembly kit model. • Length: 173 cm, Width: 67 cm. • This item features Item 35095 Japan Type 1 Self-Propelled Gun and Item 35090 Japanese Infantry Set. • The roofless fighting compartment and 75mm field gun are recreated in excellent detail. • In addition to gunner and loader figures from Item 35095, 4 soldier figures from Item 35090 are included. • Accessories such as armor-piercing and howitzer rounds are also reproduced in scale form. • Features belt-type tracks. • Includes insignia decals for figures. • Comes in a new packaging.
37,99 €
inkl. Mwst. zuzüglich Versandkosten

1:35 Rus. Mitl.KPz T-55 A (1)

Art.Nr.: 300035357 Artikelbezeichnung: 1:35 Rus. Mitl.KPz T-55 A (1) Der Russischer T-55A ist eine verbesserte Version der T-55, ausgerüstet mit einer strahlungsdämmenden Auskleidung innen und ein auf dem Turm montiertes Maschinengewehr als Antwort auf die Bedrohung durch Panzer bekämpfende Hubschrauber. Er verfügt außerdem über eine D10T100mm Hauptkanone Kaliber 56. Mit 1 Figur.
42,99 €
inkl. Mwst. zuzüglich Versandkosten

1:35 Rus. T-62A Kampfpanzer (1)

Art.Nr.: 300035108 Artikelbezeichnung: 1:35 Rus. T-62A Kampfpanzer (1) In einer bisher unerreichten Vielfalt zeigt TAMIYA hier Plastikmodelle, die in ihrer Ausführung, Detaillierung, Konstruktion und Passgenauigkeit ihresgleichen suchen. Diese Modelle halten jeder Qualitätsprüfung stand und geben Einblick in Waffentechnik und Entwicklung. Mit 1 Figu   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
20,99 €
inkl. Mwst. zuzüglich Versandkosten

1:35 US Flak-Panzer M42 Duster

Art.Nr.: 300035161 Art.bezeichnung: 1:35 US Flak-Panzer M42 Duster The M42 Duster was an anti-aircraft vehicle used in conjunction with tank units, equipped with a pair of 40mm cannons on an open-top turret, and powered by a 500hp engine that let it achieve speeds of up to 70km/h. It was accepted into service with the U.S. Army in 1953 and proved an effective anti- aircraft weapons system. • 1/35 scale plastic model assembly kit. Length: 180mm, width: 93mm. • Gun detail, loader’s seat, rifles and more in the interior. • Three marking options included, offering a choice of U.S., Japan Ground Self Defense Force and former West German Army M42s. • Belt type tracks that can be painted and attached using Tamiya cement. • NEW for this RE-ISSUE: Three figures were originally included in the motorized version of this kit (Item 30027, from 1970). They depict crew in the turret, in the act of locating a target. Updated package and 4-language instruction manual.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
29,99 €
inkl. Mwst. zuzüglich Versandkosten

1:35 US M151A1 Transportfahrzeug Vietnam

Art.Nr.: 300035334 Artikelbezeichnung: 1:35 US M151A1 Transportfahrzeug Vietnam The M151A1 was a variant of the M151, a military utility truck which was used by the U.S. Army and Marine Corps from 1959 to the early 1990s. It was first released to troops in 1964, and compared to the original, it had modified rear suspension and also received turn signals on its front fender. Some variants of the M151A1 were equipped with a 106mm rifle, and some even revamped to serve as ambulances. The vehicle also served in the Vietnam War. About the Model • 1/35 scale plastic model assembly kit. • Based on Item 35123, this model receives new parts to accurately recreate the form of the M151A1. New parts include front grille with separate headlight parts, rear panel and swing-arm suspension. • Model can be assembled to show U.S. Army or U.S. Marine Corps vehicle. • Parts to depict canopy roof and 1 figure are also included. • Includes 2 sets of markings to depict vehicles which took part in the Vietnam War.
27,99 €
inkl. Mwst. zuzüglich Versandkosten

1:35 US M151A2 Ford MUTT Geländew.(1)

Art.Nr.: 300035123 Artikelbezeichnung: 1:35 US M151A2 Ford MUTT Geländew.(1) The U.S. Armoured vehicle test course is located in Aberdeen, Maryland, and is one of the most rigorous and demanding coursed in the world. Early in April 1957, a familiar looking small vehicle was seen to be running over the course with comparitive ease, and upon closer inspection it turned out to be the replacement for the well known Willy's "Jeep", the new Ford M151. Outwardly this new vehicle loos very much like its older brother. Both are small, compact, rugged, simple to operate and maintain; however, the 151 incorporates all of the latest advanced features learned during combat operations in conflicts since world war II. Features such as the newly developed OHV engine, light semimonocoque body and 4 wheel independent suspension systems allowed it to outpoint all other submitted replacement vehicles for the ageing WWII Jeep. Development for this replacement vehicle was started by the Ford Motor Company were licensed to produce the vehicle and they delivered approximately 10,000 units a year to the U.S. Army, Navy Air Force and Marines. Shortly after its adoption it was selected by most of the nations of the free world as a replacement for their own light utility vehicles. Some of the advanced features incorporated into the M151 caused problems and defects were detected in the initial shipments, among the most serious was the strength and stability of the rear suspension system which was corrected and improved in 1964 and 1970. The M151A2 now in service has added safety features like stiffer rear suspension, large blinder lamps and a two step windshield wiper, safety glass and an impact absorbing steering wheel. With its extreme versatitliy the basic M151 can be altered into a combat ambulance; radio communications vehicle; 105mm recoilless rifle transport and a launcher for the new tow missile system adopted in the late 70's. Combat experience in VietNam has shown that the Ford M151 Military Utility Tactical Truck (MUTT) is indeed a
13,29 €
inkl. Mwst. zuzüglich Versandkosten

1:35 US M151A2 Ford MUTT m.TOW-Rak.(1)

Art.Nr.: 300035125 Artikelbezeichnung: 1:35 US M151A2 Fiord MUTT w/TOW-Miss.(1) The familiar Jeep was born during WW2 and it is said that it contributed greatly to the allied victory during that time. Following the conflict, this vehicle was widely used by most countries of the world as a small transport for the ground forces and later employed large calibre weapons systems for ground combat support. The U.S. Army first utilized this small vehicle in ground support firepower, by mounting the newly designed 105mm recoilless rifle in the rear of the Jeep. This weapon was developed to combat heavily armoured tanks and other tracked vehicles; however it was later adapted to anti-personnel operations with the development of anti-personnel shell charges. When the newer 106mm recoilless rifle came into being, it replaced the 105. This weapons system was mounted in the rear part of the Jeep, but could be also dismounted on a tri-pod for fixed use. As the old jeep became replaced with the newer M151 Ford MUTT, the 106 was also adapted to it. When the M151A2 was released during the late 70's, the model with the 106 rifle mounted was called M825. It had a beefed up rear suspension system to accept the rifles added weight of 325kg. Shortly the TOW missile system replaced the 106 recoiless rifles, as the main anti-tank mobile weapons system. Development of the TOW system began in the 1960's as a replacement for the large and heavy recoilless rifles. It was combat tested during the Vietnam conflict and proved its power and accuracy. It was further improved and finally replaced most of the 106's still in service. Officially it is called the BGM-71A; however, it is most widely called the TOW missile system which stands for Tube launched, Optically tracked, Wire guided, missile system. When the missile is fired at a target, the shooter maintains the target in the cross hairs of the sight. The infrared rays of the missile exhaust are sensed by the optical sight and the computer compensated for the speed of the targe
11,49 €
inkl. Mwst. zuzüglich Versandkosten

1:35 US Mitl. Pz. M4 Sherman Früh. (3)

Art.Nr.: 300035190 Artikelbezeichnung: 1:35 US Mitl. Pz. M4 Sherman Früh. (3) Bewaffnet mit einer 75mm M3 Kanone und von einem 350 PS luftgekühlten Continental R975-C1 Sternmotor angetrieben, erreichte der M4A1 Sherman eine Spitzengeschwindigkeit von 38,6km/h. Die Produktion begann im Juli 1942, fünf Monate später wurde dann aber schon der Nachfolger, der M4A1 produziert.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
33,99 €
inkl. Mwst. zuzüglich Versandkosten

1:35 US Sherman M4A3 75mm Späte (9)

Art.Nr.: 300035250 Artikelbezeichnung: 1:35 US Sherman M4A3 75mm Späte (9) In einer bisher unerreichten Vielfalt zeigt TAMIYA hier Plastikmodelle, die in ihrer Ausführung, Detaillierung, Konstruktion und Passgenauigkeit ihresgleichen suchen. Diese Modelle halten jeder Qualitätsprüfung stand und geben Einblick in Waffentechnik und Entwicklung. Mit 4 Figuren.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
41,49 €
inkl. Mwst. zuzüglich Versandkosten

1:35 USA Modern Infantry (Iraq)

Art.Nr.: 300032406 Artikelbezeichnung: 1:35 USA Modern Infantry (Iraq) This model figure assembly kit set comes in 1/35 scale. The soldiers depicted are from the U.S. Infantry as deployed in the Iraq War.
26,49 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWI Brit. Panzer Mk. IV Male (mot.)

Art.Nr.: 300030057 Art.bezeichnung: 1/35 WWI Brit. Tank Mk. IV Male (mot.) Tamiya is delighted to announce its maiden foray into the world of WWI models, in the year which marks the 100th anniversary of the outbreak of hostilities in what was then known as the Great War. The tanks which appeared in the conflict were the first ever seen on the battlefield, and were the forerunners of a whole line of military vehicles which is still being developed further today. The Mk.IV tank was a successor to the Mk.I, which was drawn up by British designers in attempt to break the stalemate of trench warfare experienced on the Western Front; the rhombus-shaped hull was designed to aid in crossing the extensive network of trenches. The Mk.I, first thrown into live action in September 1916 during the Battle of the Somme, had "male" (fitted with 57mm, 6-pound guns) and "female" (fitted only with machine guns) versions. Around 1,000 Mk.IV tanks were manufactured after 1917, and they inherited their shape and male/female weaponry and classifications from the Mk.I, but with significantly upgraded armor. Around 400 were used en masse in the November 1917 Battle of Cambrai to great effect, and with the world cottoning on to the new vehicle’s potential the maiden tank vs. tank battle was not far behind: in 1918, the Mk.IV faced off against its German counterpart the AV7.
84,99 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII Dt. Flak 8,8 m.Motorrad (9)

Art.Nr.: 300035017 Artikelbezeichnung: 1:35 WWII Dt. Flak 8,8 m.Motorrad (9) This famous weapon is well known for its role in World War II. It did, in fact, have its origins during the first World War, when guns of this calibre were used in an anti aircraft role.
30,99 €
inkl. Mwst. zuzüglich Versandkosten
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII Dt. Kübelwagen T82 Ramcke (5)

Art.Nr.: 300035304 Art.bezeichnung: 1:35 Dt. Kübelwagen T82 Ramcke (5) After the 1941 assault on Crete, elite German parachute units were formed into a brigade. The parachute unit, know as the "Ramcke Parachute Brigade" was created to lead assaults in North Africa against Allied forces and counter act the British SAS units attack. The brigade was heavily involved in the Second Battle of El Alamein, the attack on Stirling's Special Air Service, and DAK's assault of the Suez Canal. In 1943, at Tunisia, the Ramcke brigade saw its last battle and was forced to surrender to British forces. - Figures represent soldiers of the elite Ramcke Parachute Brigade in North Africa. - A driver, officer, machine-gunner (seated in the rear of the Kubelwagen), a non commissioned officer providing directions (wearing a tropical Herman Meyer hat), and a rifleman figure are included. - The figure from the original 1/35 scale German Kubelwagen Type 82 Africa-Corps is also included for a total of 6 figures.
31,99 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII Dt. Panzerjäger Nashorn (4)

Art.Nr.: 300035335 Artikelbezeichnung: 1:35 WWII Dt. Panzerjäger Nashorn (4) This is a highly detailed model of the WWII German tank destroyer Nashorn. The full size vehicle featured an 8.8cm gun also known as a PAK 43 and it was fitted to the upper surface of a light turret less chassis. Even though the vehicle was lightly armored, the PAK43 weapon was capable of penetrating 190mm of armor at 1,000 meters. The Nashorn saw action with German heavy antitank battalions fighting Soviet and Allied forces during much of the conflict. Due to its relatively low cost and superior mobility compared to heavier tanks it remained in production until the end of the WWII war. Decals included. Features: • The model accurately recreates the powerful form of the Nashorn, thanks to detailed research performed using an actual example of the vehicle in a museum in Russia. • Features faithful reproductions of the 71-caliber 8.8cm gun and complex fighting compartment. • Metal parts are used to ensure that the gun has authentic movement and weight. • Comes with 3 marking options, including winter and Eastern front versions. • 4 included figures depict driver and 3 crew members in a variety of realistic poses.
64,99 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII Dt. Pz-Jäger Jagdtiger Frü.(2)

Art.Nr.: 300035295 Artikelbezeichnung: 1:35 WWII Dt. Pz-Jäger Jagdtiger Frü.(2) During the later stages of WWII, the heavy tank destroyer Jadgtiger (which weighed in excess of 70 tons and had an impressive 12.8cm gun and thick armor) was the heaviest tank seen on both the eastern and western fronts. Tamiya is releasing this 1/35 scale Jagdtiger after its first release 33 years ago in commemoration of the 40th year anniversary of the 1/35 Military Miniature series. Lining this Jagdtiger up with other 1/35 scale tanks like the German King Tiger Production Turret (35164), German King Tiger Porsche Turret (35169), German Tank Destroyer Jagdpanther Late Version (35203), German King Tiger (Ardennes Front) (35252), and German Tank Destroyer Hetzer Mid Production (35285) would make for an imposing display. •Completely new design. •Interior details such as the gun breach area and the floor boards are reproduced. •Commander and driver torso figures included. •5 kinds of markings for the 653rd Heavy Tank Battalion included. •Along with its extended hull, the spare track link racks and jack are also realistically reproduced. •The separately molded disc parts of the road wheels add extra depth to the model. •Two kinds of tracks are included; easy to assemble belt type and connectible assembly type. •A choice of stowed or extended traveling clamps. •Photo-etched parts for the engine intake protective net included.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
78,99 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII Dt. SdKfz.171 Panther A (2)

Art.Nr.: 300035065 Artikelbezeichnung: 1/35 WWII Dt. SdKfz.171 Panther A (2) In the beginning of 1942, in order to fight against the T-34, the German military ordered a new tank from Dymler-Benz and M.A.N. companies with the following specifications: Weight- 35 tons; speed- 60 km/h; armament 75mm long gun and armour, 60mm thick in front hull, 35mm thick in the rear and 100 mm at the front of the gun turret. Lastly, it was specified that the tank be equipped with a Maiback HL210, water-cooled, V-type 12 cylinder engine. In May of the same year, M.A.N.'s model was chosen without waiting for completion of a prototype tank. However, there were 2 important modifications. First, in order to meet the military's demand, considerably more than the original 35 ton weight was needed. Second, the military ordered a change in the thickness of the frontal armour from 60mm to 80mm. Because of these changes, the engine type had to be chanded from HL210 to HL230. Then, in order to accommodate this engine, a much better gear was needed, but mass production began without this last change, which resulted in frequent gear malfunctions and related trouble. This became the Panther's greatest defect. In the same year, Dymler-Benz and Henschel were ordered to produce the Panther. Therefore, production was greatly increased and a total of 6283 Panther Tanks were produced, second only to P2KW-4 in number. The first mass produced Panther type D was not equipped with a machine gun but after the experience of close battle. A 7.92mm MG 34 was added to the Panther's right front hull armament beginning with its type A. The special feature of the Panther was the left and right driving mechanism. This created an interchangeability of movements, using the torsion bar system. By 1944, the Panther was further improved from Type A to Type G with a change in its side shape. The Panther continued its activities against the Allied Forces throughout the latter half of the war. One of the famed battles it waged du
20,99 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII Dt. Transport LKW 3to (2)

Art.Nr.: 300035291 Artikelbezeichnung: 1:35 WWII Dt. Transport LKW 3to (2) About the 3Ton 4x2 Cargo Truck The German army in WWII used a wide variety of wheeled vehicles as part of their overall strategy of fast mechanized warfare. Among the most widely used was the 3Ton 4x2 Cargo Truck, a truck design that was first produced in the 1930s. Featuring a dependable 6-cylinder gasoline engine,the 3Ton 4x2 Cargo Truck could take on a very large payload disproportionate to its size. They proved to be not only extremely reliable, but also very versatile, and were employed in a wide variety of roles, including fuel truck, ambulance, radio truck, as well as general-purpose cargo truck. About the Model •High-quality 1/35 scale assembly model kit of the 3Ton 4x2 Cargo Truck. •This kit is an all-new molding, and is much more accurate than kits current on the market. •The actual trucks chassis had a forward slant (designed to balance the cargos weight), and this unique feature has been accurately reproduced. •Suspension features a reasonable number of parts for easy assembly without sacrificing detail.- Driver and navigator figures included. •Accessory set of fuel drums and jerry cans also included for a full cargo load. •Comes with 4 types of markings, including both German army and Luftwaffe units. •To aid with painting, window masks will be included for the first time in a military model. •The actual truck served from the 1930s to the end of the war on all battle fronts, so this model can be displayed together with a wide range of other Tamiya 1/35 scale vehicles and figures such as Sturmgeschutz III Ausf. B and King Tiger.
42,49 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII Dt.3,7cm Flak37 m. Trupp (5)

Art.Nr.: 300035302 Artikelbezeichnung: 1:35 WWII Dt.3,7cm Flak37 m. Trupp (5) First released in 1989, Tamiya's mechanically detailed 1/35 3.7cm Flak 37 became a very popular item and often appeared in dioramas as a supporting piece. Fans have long awaited the release of this kit with anti-aircraft crew figures, and a collaboration with ICM has made this possible. A diorama depicting the crew shooting at a low flying approaching fighter aircraft can now be accurately portrayed with this set. The set features excellently proportioned figures with sharp details. •Set includes 5 crewmen figures: A commander looking into binoculars, a gunner,a spotter with rangefinder, and two loaders. •Displaying this set with other 1/35 scale military figures and vehicles would definitely addexcitement to any diorama. •Add greater realism to these figures with the WWII German Military Insignia Decal Set(Item 12625).
34,49 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII Franz. Transport. gep.m.An.(4)

Art.Nr.: 300032284 Artikelbezeichnung: 1:35 WWII Franz. Transport. gep.m.An.(4) Always looking for interesting subjects to add to our world-famous 1/35 scale Military Miniatures lineup, we now proudly announce the release of the unique French Armored Carrier UE. Display it with the B1 bis (ITEM 35282) to create an exhibit of early WWII French AFVs. About the Armored Carrier UE Originally developed in the early 1930s, this light armored carrier was capable of towing light artillery and was also designed for use in supplying infantry units at the front lines. Its compact design meant that the heads of the two crew members protruded from the chassis, so distinctive semi-spherical hatches were created to give them a little protection. The initial production of 60 vehicles was soon supplemented by larger orders as France sought to re-equip its army to face the growing threat of Germany. By 1940, approximately 4,800 had been built, including an improved version featuring 4-step gearbox and towing shackles. It was used in the early days of WWII by the French army until its surrender, after which the German army used captured vehicles until the end of the war, modifying some of them into self-propelled guns. About the Model •High-quality 1/35 scale assembly kit model of the Armored Carrier UE. •Headlight and tow hook parts included to depict UE Series 2 and Series 3 variants. •Fine details such as movable cargo compartment (planned), semi-spherical hatches, and towed trailer all accurately reproduced. •Full set of accessories, such as 6 wooden crates, 2 fuel drums, 2 each of both large and small canvas bundles, are included for realistic depiction of cargo loads. •2 crew member torso figures and 2 new French soldier figures with MAS36 rifles in standing poses included for increased diorama possibilities. •3 different types of markings planned.
42,49 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII It.M.Pz.Carro Armato M13/40(2)

Art.Nr: 300035296 Art.bezeichnung: 1:35 Ital. M.Pz.Carro Armato M13/40 (2) During WWII, the Italian army used the M13/40 as its main tank. It featured a riveted construction and bogey-style wheels on a leaf spring suspension with a 47mm main gun featuring on Italy's first ever hydraulically operated turret. In addition, the M13/40 was powered by a 125hp V8 liquid-cooled diesel engine which produced a top speed of 30km/h. From July 1940 through to 1943, approximately 800 units were produced. They fought mainly alongside the German African Corps at the North African front. About the Model   This is a 1/35 scale plastic assembly kit model. - Length: 143mm. The unique riveted form of this tank is faithfully reproduced. - Easy to connect assembly type tracks included. The suspension features a highly realistic finish. - Metal parts for the gun barrel and photo-etched parts for the anti-aircraft gun sight etc are included. - Other highlights of this model are its range of tools and radiator cap. - A standing figure, a sitting tank crewman figure, 3 kinds of decals for the North African front, and a set of badges of rank are included.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
45,99 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII SdKfz.222 Lt.Späh.-Pz Pä.(1)

Art.Nr.: 300035270 Artikelbezeichnun: 1:35 WWII SdKfz.222 Leichter Spähpanzer (1) Der 1936 entwickelte Sd.Kfz. 222 besaß einen V8-Motor Typ 108 mit 3.517cm³ und 75 PS, dazu eine 4-Rad Einzelradaufhängung und wahlweise eine 4-Rad Lenkung. Er erreichte eine Spitzengeschwindigkeit von 80km/h in der Ebene und 40km/h im Gelände. Ausgerüstet war er mit einer im Turm montierten 20mm KwK30.
30,99 €
inkl. Mwst. zuzüglich Versandkosten

1:35 WWII US 40to Transp.Dragon Wag.(4)

Art.Nr.: 300035230 Artikelbezeichnung: 1:35 WWII US 40to Transp.Dragon Wag.(4) Die Produktion vom M25 Panzertransport-Fahrzeug wurde im April 1943 aufgenommen. Mit einer Geasamtlänge von 17,48m und einem Gewicht von 34 Tonnen, einer gepanzerten Kabine mit einzigartigem Aussehen und einem kettengetribenen Hinterradantrieb war es einer der grössten Fahrzeuge des Zweiten Weltkriegs. Länge des Modells: 510 mm 649 Bauteile Mit 4 Figuren.
115,99 €
inkl. Mwst. zuzüglich Versandkosten

1:35 Zimmerit-Spatel-Set Fotoätz

Art.Nr.: 300035187 Art.bezeichnung: 1:35 Zimmerit-Spatel-Set Fotoätz During WWII, the German army applied Zimmerit coating to their tanks in order to combat magnetic anti-tank mines. ★This set of photo-etched applicator blades will help you to apply Tamiya Polyester Putty to realistically replicate the Zimmerit coating on your model. ★Includes four sizes of applicator blade to allow you to apply a coating on both wide and narrow surfaces.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
11,69 €
inkl. Mwst. zuzüglich Versandkosten

1:35/1:16 WWII Figuren-Rangabzeichen

Art.Nr.: 300012625 Artikelbezeichnung: 1:35/1:16 WWII Figuren-Rangabzeichen Detailgetreuer Tamiya-Dekorbogen (Decal Set bzw. Abziehbilder) für deutsche Figuren des 2 Weltkrieges im Maßstab 1:16 sowie 1:35.
10,39 €
inkl. Mwst. zuzüglich Versandkosten

1:350 Jp. U-Boot i-400

Art.Nr.: 300078019 Artikelbezeichnung: 1:350 Jp. U-Boot i-400 Created as part of a plan to attack major cities in the United States and the Panama Canal, the three I-400 class large aircraft carrier submarines were quite technologically advanced. Featuring an extremely long range and heavily armed with both torpedoes and deck guns, they were also equipped with catapults to launch their three Aichi M6A Seiran aircraft. While on their way to attack the Panama Canal, the submarines were ordered to attack the Allied naval base at Ulithi instead. However, hostilities ended before any attack could be launched. After surrendering to U.S. forces, the I-400 was eventually sailed to Hawaii, where they were studied and then scuttled. - High-quality 1/350 scale assembly kit model of the I-400 submarine. - Accurately reproduced hull features two-piece construction with upper and lower hull sections. - Hangar hatch may be modeled in both open and closed positions for increased display possibilities. - Details such as crane arm and antenna array realistically depicted with precision-made photo-etched parts. - Metal parts for propeller screw shafts provide additional detail. - Parts are included to allow depiction of the Seiran aircraft with wings in both extended and folded positions.   Furthermore, photo-etched parts are used for aircraft propellers and dollies. - Conveniently includes special display base.     Achtung! Nicht für Kinder unter 14 Jahren geeignet.
72,99 €
inkl. Mwst. zuzüglich Versandkosten

1:350 US Marine Flugzeugset II (10)

Art.Nr.: 300078009 Artikelbezeichnung: 1:350 US Marine Flugzeugset II (10) U.S. Marinenflugzeug Bausatz mit einen McDonnell Douglas F-4S Phantom II, einen Grumman EA-6B Prowler, einen Grumman E-2C Hawkeye und einen Sikorsky SH-3H Sea King.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
7,19 €
inkl. Mwst. zuzüglich Versandkosten

1:350 US Navy Flugzeug-Set I (10)

Art.Nr.: 300078006 Artikelbezeichnung: 1:350 US Navy Flugzeug-Set I (10) U.S. Marinenflugzeug Bausatz mit zwei Grumman F-14A Tomcat, einen McDonnell Douglas F-18A Hornet, einen Vought A-7E Corsair II, einen Lockheed S-3A Viking und einen Grumman A-6E Intruder.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
7,19 €
inkl. Mwst. zuzüglich Versandkosten

1:350 WWII US Zerstörer DD445 Fletcher

  Achtung! Nicht für Kinder unter 14 Jahren geeignet.
33,49 €
inkl. Mwst. zuzüglich Versandkosten

1:48 Brit. 7ton AC Mk. IV Panzerwagen

Art.Nr.: 300032587 Art.bezeichnung: 1:48 Brit. 7ton AC Mk. IV Panzerwagen
19,49 €
inkl. Mwst. zuzüglich Versandkosten

1:48 Dt. Messerschmitt Bf109 E3

Art.Nr.: 300061050 Artikelbezeichnung: 1:48 Dt. Messerschmitt Bf109 E3 About the Messerschmitt Bf109 E-3 Without a doubt, the Messerschmitt Bf109 can be claimed as the most famous and successful German aircraft from the WW2. It was the world's most advanced fighter at the time of its debut in 1936, and remained as the standard fighter for the Luftwaffe throughout the conflict. Created by the brilliant designer Willi Messerschmitt, it had the smallest possible airframe built around the most powerful engine available. It also boasted many of the then innovative features such as an all metal stressed skin construction, retractable main landing gear, automatic Handley-Page leading edge slats, etc. The Bf109 saw first combat during the Spanish Civil War and fully demonstrated its exceptional maneuverability, inherited from its precedent Bf108 Taifun (Typhoon) multi-purpose sports plane. The Bf109 underwent numerous improvement throughout its career, and mass production of the E variant started late in 1939. Within one year, about 2,000 "E" aircraft were rolled out. Its excellent performance greatly contributed in the active service of German pilots at the Western Front and during the "Battle of Britain". The E-3 version used an improved Daimler-Benz DB601Aa engine capable of 1,100 h.p. output. This engine had provision for mounting a 20mm MG FF cannon on the crankcase and firing through the propeller hub. The Messerschmitt Bf109E was one of the best fighters of the early WW2 period, on a par with the British Spitfire.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
27,49 €
inkl. Mwst. zuzüglich Versandkosten

1:48 Dt. Nachtjäg.Heinkel Uhu He219

Art.Nr.: 300061057 Artikelbezeichnung: 1:48 Dt. Nachtjäg.Heinkel Uhu He219 Die He 219 A-7 UHU angetriben von zwei Daimler-Benz DB603 Motoren zeigte dieses Flugzeug mit dem langen, schlanken Rumpf in der Schlußphase des Kriegs seine Kampfqualitäten bei Nachtoperationen gegen Alliierte Bomber.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
51,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 Dt. PzKpfw. IV Ausf.H (Späte Prod.)

Art.Nr.: 300032584 Artikelbezeichnung: 1:48 Dt. PzKpfw. IV Ausf.H (Späte Prod.) The Panzer IV was one of the most feared weapons in WWII, and would serve German forces throughout the conflict in the guise of a number of variants. The Ausf.H variant itself featured early, middle and late production types, all of which were armed with a L/48 75mm gun and featured "Schürzen" armor side skirts for greater protection. Late production Panzer IVs were identifiable by their tracks: they lacked a center guide. Upper road wheels had their rubber tires removed and were made into steel wheels, while the tank received cast metal idler wheels. 3,774 Ausf.H Panzer IVs were produced between April 1943 and July 1944, and it was eventually succeeded by the Ausf.J. The Tamiya model in 1/48 scale captures every detail and nuance of the real life subject thanks to extensive research of the full size vehicle.
27,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 Dt. Sturmtiger 38cm

Art.Nr.: 300032591 Artikelbezeichnung: 1:48 Dt. Sturmtiger 38cm The Tamiya 1/35 Military Miniatures Sturmtiger is a classic kit that has been around for decades. The 1/48 scale version has received all new tooling and further extends the long line-up of kits offered in this smaller scale! The Sturmtiger was a seldom-seen variant of the Tiger I, using existing chassis and suspension to mount a mammoth 38cm caliber mortar for use against buildings and other fortifications in urban warfare. Only an estimated 18 were ever produced, between August and December 1944, and they were somewhat unwieldy in that they weighed around 65 tons. Nonetheless, they would still have proved a frightening foe to those who encountered them in the Battle of the Bulge, the Warsaw Uprising and the invasion of the German homeland.
29,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 Fairchild Republic A-10A Thunder.II

Art.Nr.: 300061028 Artikelbezeichnung: 1:48 Fairchild Republic A-10A Thunder.II About the Fairchild Republic A-10A "Thunderbolt II" The need for close air support, on small pin point targets, was recognized early during the Vietnam conflict. Following an experimental development program begun in the early 1970's, the Fairchild Republic Industries A-10 Thunderbolt II was selected for production. The performance characteristics demanded were for operation on unimproved short fields, both high and low airspeed maneuverability, easy maintenance, long loiter times and range, excellent pilot protection, and a capacity for large mixed weapons loads. The appearance of the A-10 is remarkable while its performance is amazing. Known affectionately as the "Wart Hog" by its pilots, it's a large single seat aircraft, identified by a pair of TF-34-100A high bypass fan jet engines mounted high near the rear of the twin tailed fuselage. A few of the specifications are: Length 53' 4"; height 14'8", span 57'6"; maximum gross weight 47,400lbs, including 16,000lbs of external stores. Internal armament is the GAU-8/A 30mm Gatling cannon capable of 2100 or 4200 rounds per minute. It carries 1350 rounds of ammunition, a fire control head-up display, CRT TV monitor, laser spot seeker plus a diversified armament panel that can facilitate any operational need. The A-10 has been around since 1972, and has again proven its worth during the recent Gulf war.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
35,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 Grumman F-14A Tomcat

Art.Nr.: 300061114 Artikelbezeichnung: 1:48 Grumman F-14A Tomcat Die Grumman F-14A Tomcat der amerikanischen Marine genießt seit der Außerdienststellung 2006 immer noch großes Interesse in der Öffentlichkeit. Der Erstflug der F-14 war im Dezember 1970 und die Produktion startete 1974 und endete 1992. Angetrieben von zwei TF30 Triebwerken erreichte diese mit dem Nachbrennerschub eine Höchstgeschwindigkeit von ca. Mach 2,3. Die komplexe Bedienung erforderte einen zweiten Mann, den RIO (Radar Intercept Officer) im Cockpit, daher die Auslegung als Zweisitzer. Das vielleicht auffälligste Detail sind die Schwenkflügel, welche von 20° bis 75° geschwenkt werden können (20° für Start- und Landungen, 55° für den jeweiligen Einsatz, 68° Überschallflug, 75° Parkposition (Hangar/Flugzeugträgerdeck)). Die Schwenkflügel erlaubten situationsbedingte Geschwindigkeiten von Lande – bis Höchstgeschwindigkeit. Die Aufnahme und der Einsatz der verschiedenen Waffensysteme machten die F-14 zu einen vielseitigen Trägersystem und erfolgreichen Abfangjäger. Benötigte Farben: - 300085017 TS-17 Aluminium Silber glänzend 100ml - 300085027 TS-27 Weiss matt 100ml - 300085029 TS-29 Schwarz seidenmatt 100ml - 300085042 TS-42 Hell Gun Metall seidenmatt 100ml - 300085047 TS-47 Chromgelb glänzend 100ml - 300086510 AS-10 Ozeangrau matt (RAF) 100ml - 300086514 AS-14 Olivegrün matt (USAF) 100ml - 300086516 AS-16 Hellgrau matt (USAF) 100ml - 300081001 X -1 SCHWARZ glänzend 23 ml - 300081002 X -2 WEIß glänzend 23 ml - 300081003 X- 3 KÖNIGSBLAU glänzend 23 ml - 300081007 X-7 ROT glänzend 23 ml - 300081008 X -8 ZITRONEN-GELB glänzend 23 ml - 300081010 X-10 GUN METALL glänzend 23 ml - 300081011 X-11 CHROM SILBER glänzend 23 ml - 300081018 X-18 Schwarz seidenmatt 23ml - 300081023 X-23 Klar-Blau glänzend 23ml - 300081025 X-25 Klar-Grün glänzend 23ml - 300081026 X-26 Klar-Orange glänzend 23ml - 300081027 X-27 Klar-Rot glänzend 23ml - 300081031 X-31   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
97,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 Jap. Mitsu. J2M3 Interceptor Raiden

Art.Nr.: 300061018 Artikelbezeichnung: 1:48 Jap. Mitsu. J2M3 Interceptor Raiden The J2M Raiden (Allied reporting name "Jack") was developed by the Japanese Navy in WWII as a land-based interceptor. It began to reach units from September 1944 and they were used to intercept B-29 bombers which were attacking Japan. This kit accurately depicts the J2M3 variant and allows modellers to assemble either deployed or retracted landing gear. Parts for a drop tank and two pilot figures, as well as three marking options, including a 302nd Kokutai aircraft, are included.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
15,89 €
inkl. Mwst. zuzüglich Versandkosten

1:48 Messerschmitt BF109E-4/7 Trop

Art.Nr.: 300061063 Artikelbezeichnung: 1:48 Messerschmitt BF109E-4/7 Trop The Messerschmitt Bf 109E was the Luftwaffe's mainstay fighter in the early stages of WWII. This kit depicts the E-4, which was produced from May 1940 and saw extensive action during the Battle of Britain, and the E-7, which was fitted with a drop tank for increased range. The angular form of the aircraft has been accurately reproduced complete with details such as a canopy that may be assembled in open or closed position, a rack for the E-7's drop tank, and the Trop version's air intake with sand filter. One pilot figure and three marking options are included.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
27,49 €
inkl. Mwst. zuzüglich Versandkosten

1:48 US P-51B Mustang North Americ.

Art.Nr.: 300061042 Artikelbezeichnung: 1:48 US P-51B Mustang North Americ. About the North American P-51B Mustang The Allison engine powered P-51A Apache, was derived from the original RAF Mustang 1 ground attack and photo reconnaissance aircraft. Long before anyone had even heard of a Mustang, the plan to put a Rolls Royce Merlin engine into the airframe had started. The Merlin was powering some of the best warplanes in England; the Hurricane, Spitfire and the Avro Lancaster bomber. To develop a new engine for the P-51 would take considerable time, which the allies did not have. In September 1940, the Packard Motor Company of the U.S. began license production of the Merlin V-1650-1 engine in Detroit, Michigan. With a new supercharger drive, a new V-1650-3 was mated to the first P-51B. Both the U.S. and England started the Merlin engine modification idea almost simultaneously. 10 airframes were modified in the U.S. with the Merlin and these became the basis for the most successful fighter series of the war. Flying for the first time on 30 November 1942, the XP-51B was soon modified with a larger coolant radiator scoop, which actually increased its top speed by 50mph and gave it a higher ceiling by 10,000 ft. The addition of an 85 gallon fuel tank behind the seat increased the P-51B's already excellent range, and it could now escort the bombers all the way to the target and back. P-51B Mustangs began arriving in England in September 1943 with the first Mustangs going to the 3354th fighter group at Boxted, England, and ended the war with the most air to air victories. A total of 3788 P-51B's were produced.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
27,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 US P-51D Mustang North American

Art.Nr.: 300061040 Artikelbezeichnung: 1:48 US P-51D Mustang North American About the North American P-51D Mustang 8th AF In April 1940, drawings were sketched in a New York City hotel room for a new fighter aircraft for the British purchasing Commission. This fighter, the North American NA73X, became one of the best fighter aircraft in the U.S. Army Airforce during World War II, and is known as the P-51 Mustang. Of the several variations of this famous fighter, the P-51D is generally accepted as the definitive Mustang and was the first production version with the "Bubble" canopy. More "D" model Mustangs were built than all other Mustang variants combined, with a total of 9,603 coming off production lines. 45 squadrons of the famed U.S. 8th Airforce, stationed in England were equipped with the P-51D, which could now escort and protect the heavy bombers all the way to and from targets on the European continent. There were several major changes that set the "D" apart form earlier Mustangs. One was the change from four .50 caliber machine guns to six, three in each wing. Another was to mount the guns upright which helped to eliminate a jamming tendency that occurred in the four gun system. Ammunition was increased to 400 rounds per inboard gun, and 270 rounds for each of the other four. Underwing pylons were strengthened to carry the 110 or 165 gallon auxiliary drop tanks or 1,000 lb bomb. P-51D Mustangs went to fight in the later Korean conflict and it last flew combat in 1956 in the deserts to the Middle East, when Israel used Spitfires, Messerschimitts and Mustangs together in the Mid East conflict.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
27,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 US Re. P-47D Thunderb. Razorback

Art.Nr.: 300061086 Art.bezeichnung: 1:48 US Re. P-47D Thunderb. Razorback In 1943, the 8th Air Force was launching raids on Germany with its B17 and B24 from England. The aim was to destroy German main production factories. Unfortunately, losses during theses missions were very heavy and it became urgent to develop a fighter able to escort the bombers over enemy soil. The limited ranges of the Spitfire and P-38 Lightning did not make these fighters able to go further than Paris, leaving the bombers alone to fend for themselves for the rest of the flight. With the development of the P-47, this problem was overcome. The P-47 was the first single-seated fighter to be equipped with a supercharger, allowing it to fly at the same high altitude as the bombers. This high-flying fighter was armed with eight 12.7mm machineguns that proved very useful in the intense fighting that occurred in the European skies. Equipped with drop tanks for longer range, the P-47D was then able to escort the bombers all the way to the German border. The Thunderbolt also allowed many Allied pilots to become Aces. Bomber crews plagued day after day by intensive German interceptions, would remark that the presence of the P-47 was of great help.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
45,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 US WWII 2,5to 6x6 Flugfeld Tankw(2)

Art.Nr.: 300032579 Art.bezeichnung: 1:48 US 2,5to 6x6 Flugfeld Tankwagen (2) The model US Airfield Fuel Truck - 2 1/2 Ton 6x6 in 1/48 scale has a length of about 107 mm. What better subject to compliment your 1/48 scale diorama than this U.S. airfield fuel truck model. The model is a modification of Item 32548 US 2.5 Ton 6x6 Cargo Truck and depicts a fuel truck typical of those that would have served during WWII.
26,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 USN Douglas A1-H Skyraider

Art.Nr.: 300061058 Artikelbezeichnung: 1:48 USN Douglas A1-H Skyraider About Douglas A-1H Skyraider U.S. Navy During 1943 the U.S. Bureau of Aeronautics considered to combine the tasks of torpedo bomber and dive-bomber into one. Several aircraft manufacturers, such as Douglas and Martin, were requested to develop a large, single-seat attack aircraft. According to the requirement, Douglas Skyraider, was developed by Douglas Aircraft Company, Inc. The development was started in early July 1944, and all night efforts of engineers made the first prototype's first flight possible already on March 18, 1945. Despite the short period of the development, flight trials proved the airframe's flight characteristics satisfactory and the aircraft was rated very highly. In May 1945 a letter of intent for 598 production was signed. The name "Skyraider" was officially approved for the aircraft in February of the following year, and the distribution to units was started at the end of the same year. The Skyraider was powered by Wright R3350 radial engine yielding 2,800 horse power and equipped with three large dive brakes on the fuselage. The Skyraider had a number of types, from the AD-1 to AD-7, recording grand total number of production of more than 3,000. Among them, AD-6 was the most produced variant. The AD designation for the Skyraider was changed in 1962, and the AD-6 became the A-1H. Noted for its durability and a large capacity for external stores, the Skyraider was well liked by its pilots and crewmen.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
38,49 €
inkl. Mwst. zuzüglich Versandkosten

1:48 WWII Brit. Panzerspähwagen Dingo II

Art.Nr.: 300032581 Art.bezeichnung: 1:48 Brit. Panzerspähwagen Dingo II This British armored scout car boasted enviable maneuverability and armor up to 30mm thick on its compact hull. Often referred to by its nickname of "Dingo", delivery of the Mk.I variant began in 1939; the later Mk.II featured various modifications, including an overhaul of the steering system. All told, more than 6,600 "Dingoes" were manufactured until 1945, serving in a range of locations in both reconnaissance and command car roles. About the Model This is a 1/48 scale plastic model assembly kit of the "Dingo" Mk.II. - Length: 69mm, width: 37mm. - The lightweight and compact form with distinctive flat panels is authentically recreated. - The model can be assembled with folding roof in open or closed position. - Suspension is realistically depicted with intuitive parts makeup. - Commander and driver figure are included in realistic action pose. - Contains one set of markings to recreate a vehicle in combat in Europe.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
15,89 €
inkl. Mwst. zuzüglich Versandkosten

1:48 WWII British M10 IIC Achilles

Art.Nr.: 300032582 Artikelbezeichnung: 1:48 WWII British M10 IIC Achilles Britain was supplied with a number of American M10 tank destroyers under the Lend-Lease programme. The M10 was based upon the famed M4 Sherman tank, but with lighter and more highly sloped armor which allowed the M10 to reach higher speeds. The British switched the original U.S. 3-inch gun with their own powerful 17-pounder on over 1,000 M10s, changing the name to IIC, or sometimes "Achilles". While the new gun required a muzzle brake to be fitted onto the vehicle, other modifications were limited to thicker front and side armor, plus a turret-top shield. With this year marking the 70th anniversary of the D-Day operations, the Achilles provides a timely new face for the 1/48 Military Miniatures series. About the Model • This is a 1/48 scale plastic model assembly kit. Length: 152mm, width: 63mm. • The form of the Achilles with British 17-pounder gun and characteristic "duck bill" muzzle brake is faithfully recreated. • The model depicts a late production version of the tank destroyer with suspension bogies raised upon support roller brackets. • The open top fighting department is authentically reproduced using a limited number of parts. • Includes markings to recreate an Achilles which took part in the Normandy landings that were central to the D-Day operation. • Features a plastic lower hull. .
24,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 WWII Dt. F.W. Fw190 F-8/9 m.Belad.

Art.Nr.: 300061104 Art.bezeichnung: 1:48 WWII Dt. F.W. Fw190 F-8/9 m.Belad. In the latter half of WWII, the Luftwaffe Focke-Wulf Fw190 F series were the main aircraft used for air-to-ground assaults. The F-8, which entered the fray from the spring of 1944, was based on the A-8 aircraft and had the largest production numbers among the F series variants. The F-9 which had a superior engine output was also soon put into action. Both Fw190 F-8 and F-9 aircraft fought hard against the ever increasing numbers of Allied fighters up until the end of the war.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
39,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 WWII Dt. Fieseler FIL156C Storch

Art.Nr.: 300061100 Artikelbezeichnung: 1:48 WWII Dt. Fieseler FIL156C Storch About the Fi 156 Storch Produced to meet a Luftwaffe requirement for a new liaison aircraft, the Fi 156 Storch was a light aircraft that had amazing STOL (Short Take-Off and Landing) capabilities. The design incorporated such practical features as folding wings, which allowed it to be easily transported, and landing gear shock absorbers that allowed it to land on rough surfaces. It was used in a variety of roles, including liaison, tactical reconnaissance, and air ambulance, and it was the aircraft that was involved in the daring rescue of Italian dictator Benito Mussolini. Field Marshal Erwin Rommel was also known to make heavy use of his Fi 156 for battlefield reconnaissance in North Africa. About the Model •Highly-detailed 1/48 scale assembly kit model of the Fieseler Fi 156 Storch. •Kit includes parts to replicate various versions of the Fi 156C, including fuel tank, skis, and 3 different types of canopies. •Clear canopy sides have been molded together with the fuselage halves for more realistic construction. •Important structural sections such as the wing spar and the landing gear struts are made from metal parts for enhanced realism and strength. •Includes 1 pilot and 1 commander figure. •Precision photo-etched parts such as cockpit panels, cockpit frame, and front seat also included.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
77,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 WWII Dt. Kettkrad m.Starthilfegerät

Art.Nr.: 300032533 Artikelbezeichnung: 1:48 WWII Dt. Kettkrad m.Starthilfegerät Die Flugzeug-Energieversorgungs-Einheit: Der "Anlasswagen" wurde engesetzt zum Anlassen der Flugzeugen, wodurch die Lebensdauer der Batterien verlängert wurde. Das Kettenkraftrad: Ein einzigartiges Halbketten-Motorrad als leichte Zugmaschine.
21,49 €
inkl. Mwst. zuzüglich Versandkosten

1:48 WWII Dt. Seitenwagengespann (2)

Art.Nr.: 300032578 Art.bezeichnung: 1:48 Dt. Seitenwagengespann (2) Add some more detail to your 1/48 scale dioramas with this scale model of a German motorcycle and side car. Side cars were paired with motorcycles by German forces in many areas of the WWII conflict, and their excellent off-road ability combined with the bike’s engine power made them a useful asset in transporting soldiers and equipment, some even being mounted with machine guns.
13,79 €
inkl. Mwst. zuzüglich Versandkosten

1:48 WWII Dt.Heinkel He162A-2 Salamander

Art.Nr.: 300061097 Artikelbezeichnung: 1/48 WWII Dt.Heinkel He162A-2 Salamander The Luftwaffe's Last Hope As the situation became more desperate for the German forces near the end of WWII, a call was made for a new inexpensive jet fighter that would be simple to produce and fly. In the amazingly short span of 3 months from drawing board to first flight of the prototype, Heinkel produced the small, sporty-looking He162. The lightweight fighter featured mainly wooden construction and was powered by a BMW003 turbojet, which made it the fastest jet fighter of WWII with its 838km/h top speed. Reaching combat units in late March 1945, the little fighter managed to record some combat successes despite the acute fuel and parts shortage. About the Model High-quality assembly kit display model of the He162 A-2 "Salamander" jet fighter. ★Length: 205mm, Width: 149mm ★Top-mounted BMW003 turbojet engine with parts for opened and closed engine bay covers to allow full display of internal details. ★Special dolly included to display the engine separate from the aircraft. ★Canopy can be posed in the open or closed positions, and the ejector seat is removeable. ★Includes 1 pilot figure and 4 types of markings.     Achtung! Nicht für Kinder unter 14 Jahren geeignet.
38,49 €
inkl. Mwst. zuzüglich Versandkosten

1:48 WWII Dt.Panzer II Ausf.A/B/C F.C.

Art.Nr.: 300032570 Art.bezeichnung: 1:48 Dt. Panzer II Ausf.A/B/C F.C. In the mid 1930s, the German military pushed the production of tanks. The Panzer I designed as a training tank, did not have the adequate performance, so a light tank was needed to full the gap until the Panzer III could be introduced. Therefore, the German Ordnance Department issued a request for a new training tank that could be used for combat. In the end, MAN was chosen in 1934 to produce the Panzer II, a compact 4.8m long, 2.2m wide design with a three man crew. The 8.9 ton tank featured a 2cm Kwk 30 L/55 cannon and 7.92mm machine gun in the turret, 15mm armor protection for turret and hull front, leaf spring suspension, and a 140hp Maybach HL 62 TRM engine matched with a ZF SSG46 transmission, which gave it a 40km/h top speed. The Ausf. A was produced from 1937, followed by the Ausf. B and C, which were difficult to distinguish from each other visually. About 1,100 Panzer tanks were produced by April 1940, and due to delays with the Panzer III, they were immediately issued as the Panzer divisions' main tank for the invasion of Poland in September 1939. Based on lessons learned on the battlefields of Poland and, in May 1940, France, improvements such as extra armor and a turret cupola were added, and the Panzer II went on to serve in North Africa and Russia in front line and liaison and reconnaissance duties until the end of 1943. Afterwards, they were used to police occupied territories and the chassis was also adapted for use as the basis for various self-propelled gun designs.
26,49 €
inkl. Mwst. zuzüglich Versandkosten

1:48 WWII Dt.Sd.Kfz.181 Tiger I Ausf.E

Art.Nr.: 300032504 Artikelbezeichnung: 1:48 WWII Dt.Sd.Kfz.181 Tiger I Ausf.E Der deutsche Panzer Tiger I wurde im Jahre 1942 konstruktioniert. Er wurde zuerst an der Nordafrika-Front eingesetzt. Der Tiger I hatte eine Panzerungsstärke von 100mm an der Stirnseite und 80mm an beiden Seiten, die Hauptkanone war die äußerst starke88mm KwK 36 L/56. Das Triebwerk, Maybach`s HL 210 P45, leistete 650 PS.
34,49 €
inkl. Mwst. zuzüglich Versandkosten

1:72 De Havilland Mosquito FB Mk.IV

Art.Nr.: 300060747 Artikelbezeichnung: 1:72 De Havilland Mosquito FB Mk.IV The De Havilland "Mosquito" made of wood was designed based on "high-speed bomber shaking off fighter". The design of the Mosquito was got in shape in 1939. The De Havilland had experienced producing "DH88 Comet" made of wood before, therefore they paid attention that the surface of wooden wing could be finished smoothly and the amount of aluminum could be saved. Two of Rolls Royce Merlin engines were selected as the source of power and the wood was used as the material of this fuselage. The parts with the metal were only the parts of the periphery of the engine and the landing gear. At the first time, the Air Ministry was passive adopting the Mosquito because of wooden and no machine guns. However the Mosquito made a maiden flight with the maximum speed of 630km when the "Spitfire" had the maximum speed of 580km at those time. Therefore a lot of "Mosquito" were suddenly requested. After many types of the Mosquito were produced, Night-Fighter Mk. II armed with 7.7mm machine guns on its nose and A.I.Mk.IV radar made an appearance. This Mosquito brought its ability into full play in attacking an airfield and intercepting raiding bombers. Also Fighting Bomber Mk. VI armed with four 225kg bombs and eight of rocket bombs was arranged as the actual fighting in Mar. 1943. This type played havoc with theland forces, the battleships and the U-boat. Furthermore it was active in attacking the railroad and its bridge at Burmese front line, giving a blow to Japanese army. The mosquito's wooden structure was strong against being shot, therefore it held an established position from the pilots with the special mission. Detailierter Plastikmodellbausatz des Modells De Havilland Mosquito FB Mk.IV im Maßstab 1:72
21,49 €
inkl. Mwst. zuzüglich Versandkosten

1:72 F-51D Mustang North American

Art.Nr.: 300060754 Artikelbezeichnung: 1:72 F-51D Mustang North American Sketched out in a New York city hotel in April 1940, the North American Aviation Corporation NA73X went on to become one of the best fighters to come out of World War 2. The U.S. Army Air Corps gave it the title of P (for Pursuit) 51, and it was named Mustang by the British. Of the several variations of the Mustang, the P-51D is considered the definitive version and was the first to have the bubble canopy. More "D" models were built than any other variant, with a total of 9,603 being produced. Armed with six .50 caliber machine guns, three in each wing, with 400 rounds for each inboard gun and 270 rounds for the other four, plus underwing pylons for auxiliary fuel tans or 1000lb bombs, the Mustang was a true fighter pilots airplane. At the conclusion of WW2, Mustangs were in operation all over the world, flying in several nations air forces. When the Korean conflict broke out, hundred of F (for fighters) 51's were in Japan awaiting scraping. Because they possessed too slow speed maneuverability that was absent in the new jets then entering service, the F-51 was ideal to work with Forward Air Controllers (FAC's) on the ground in Korea. The major drawback to this was the F-51's liquid cooled engine susceptibility to anti aircraft and small arms fire when attacking ground targets. This caused the Mustang to have the highest loss ratio of any aircraft in Korea. A total of 194 were lost in three years, with only 10 being downed in combat with other aircraft. Detailierter Plastikmodellbausatz des Modells F-51D Mustang North American im Maßstab 1:72
14,99 €
inkl. Mwst. zuzüglich Versandkosten

1:72 Focke Wulf Fw 190 D-9

Art.Nr.: 300060751 Artikelbezeichnung: 1:72 Focke Wulf Fw 190 D-9 Following the successful entry of the Focke-Wulf Fw190 A series of fighter aircraft over the English channel during the autumn of 1941, the German RLM requested a high altitude version to complement the fighter fleet, and three projects were started. The Fw 190B used the B.M.W. 801 turbo-supercharged radial engine and a pressurized cockpit, but very few of these were built. The Fw190C was powered by a 1,750hp Daimler Benz DB603A in-line engine, of which three prototypes were built. The third high altitude project was based on the Focke Wulf Fw190A airframe and powered by a Junkers engine. The fuselage was lengthened to accommodate the V-12 cylinder, liquid cooled, 1,750hp Jumo 213 engine, and made its initial flight during the winter of 1941-42, Five further prototypes were produced, plus a small batch of Fw190 D-0s were completed from standard production Fw 190A-7 airframes. These pre-production aircraft were followed by the Fq-190D-1's which had the increased area vertical fin and rudder. There were no Fq190 D-2 through D-8 designations. The Fw-190D9 began production in June 1944, with early versions having the flat topped canopy, and from W.Nr 210001 onwards having the Galland hood (blown canopy). It went into combat with the III/JG 54 "Grunherz" (Green Hearts) in September 1944, at Achmer, Germany, as top cover for the new Messerschmitt Me262 jet fighters then entering service. Detailierter Plastikmodellbausatz des Modells Focke Wulf Fw 190 D-9 im Maßstab 1:72
14,99 €
inkl. Mwst. zuzüglich Versandkosten

1:72 Kawanashi Shiden Type 11

Art.Nr.: 300060768 Artikelbezeichnung: 1:72 Kawanashi Shiden Type 11 Evolving from the Kawanishi N1K1 "Kyofu" floatplane, the Imperial Japanese Navy's N1K1-J Shiden had a unique pedigree amoung WW2 landplane fighters of the world. In January 1942, the Kawanishi Aircraft firm began adaptation of the Kyofu into a land based fighter, strictly as a private venture. This project was soon officially authorized under the designation N1K1-J, with the first prototype flying in December 1942. The airframe was basically the same as its predecessor, with main landing gear and tall wheel replacing the floats. In place of Kyofu's Mitsubihi Kasei engine, a more compact and powerful Nakajima Homare engine was installed. Excellent performance and superb maneuverability was achieved using this engine, however it brought about serious problems. In order to use all of the available power in the engine, a large diameter propeller was required. This required unusually long main landing gear legs, because of the midwing configuration. This caused difficulties in the landing gear retraction system. Kawansihi engineers managed to solve the problem by introducing telescopic main landing gear legs. The complex gear system and unreliability of the engine, plagued the N1K1-J throughout its career, until the introduction of the improved, low-wing N1K2-J Shiden-Kai. About 1,000 N1K1-J fighters were produced and were active around the Phillipine islands, Formosa, Okinawa and over the Japanese Island of Honshu. Detailierter Plastikmodellbausatz des Modells Kawanashi Shiden Type 11 im Maßstab 1:72
13,79 €
inkl. Mwst. zuzüglich Versandkosten

1:72 Messerschmitt Bf109E-3

Art.Nr.: 300060750 Artikelbezeichnung: 1:72 Messerschmitt Bf109E-3 Without a doubt, the Messerschmitt Bf109 can be clamed as the most famous and successful German aircraft from the WW2. It was the world´s most advanced fighter at that time of its debut in 1936, and remained as the standard fighter for the Luftwaffe throughout the conflict. Created by the brilliant designer Willi Messerschmitt, it had the smallest possible air frame built around the most powerful engine available. It also boasted many of the then innovated features such as an all metal stressed skin construction, retractable main landing gear. Automatic Handley-Page leading edge slats, etc. The Bf109 saw the first combat during the Spanish Civil War and fully demonstrated it exceptional maneuverability, inherited from its precedent Bf108 Taifun (Typhoon) multi-purpose sports plane. The Bf109 underwent numerous improvements throughout its carrier, and mass production of the E variant started late in 1939. Within one year, about 2,000 "E" aircraft were rolled out. Its excellent performance greatly contributed in the active service of German pilots at the Western Front and during the "Battle of Britain". The E-3 version used and improved Daimler-Benz DB601Aa engine capable of 1,100 h.p. output. This engine had provision for mounting a 20mm MG FF cannon on the crankcase and firing through propeller hub. The Messerschmitt Bf109E was one of the best fighters of the early WW2 period, on a par with the British Spitfire. Detailierter Plastikmodellbausatz des Modells Messerschmitt Bf109E-3 im Maßstab 1:72
14,99 €
inkl. Mwst. zuzüglich Versandkosten

1:72 MIL Mi-24 Hind Helikopter

Detailierter Plastikmodellbausatz des Modells MIL Mi-24 Hind Helikopter im Maßstab 1:72
15,59 €
inkl. Mwst. zuzüglich Versandkosten

1:72 Mits. A6M3 Zero Fighter Mo. 32 Hamp

Art.Nr.: 300060784 Art.bezeichnung: 1:72 Mits. A6M3 Zero Fighter Mo. 32 Hamp The 1/72 scale Warbirds Collection welcomes the A6M3 Zero fighter Model 32, which was codenamed ‘Hamp’ by American forces. The Model 32 was an evolution of the Model 21; it received an improved Sakae 21 engine and shorter, redesigned main wing, with the effect that its top speed increased by 11km/h and it also had improved roll and diving speed, albeit at the cost of increased fuel consumption. In fact, this plus with the Model 32’s smaller fuel tank meant its range was some 1,000km shorter. The Model 32 made its maiden flight on July 15th 1941, and first saw service with the 2nd Fighter Group in Rabaul, the Philippines. All told, 343 Model 32 aircraft were manufactured, a number so low in part due to the range limitations of the aircraft. About the Model • This is a 1/72 scale plastic model assembly kit. • The model faithfully replicates the form of the A6M3 Zero Model 32 with square-shaped wings. • Main wing, fuselage, and engine cowl are all newly-designed parts. • Features such as flaps integrated with wing parts make this model easy to build while still retaining an excellent grasp of the aircraft’s details. • 3 sets of markings included.   Achtung! Nicht für Kinder unter 14 Jahren geeignet.
19,49 €
inkl. Mwst. zuzüglich Versandkosten

1:72 Mosquito B Mk.IV/PR Mk.IV

Art.Nr.: 300060753 Art.bezeichnung: 1:72 Mosquito B Mk.IV/PR Mk.IV The versatile Mosquito stood with the Spitfire fighter and Lancaster bomber and earned the respect of British pilots during World War II. In 1939, the De Havilland company envisioned the plane to be an unarmed high speed bomber, and had experience with the Comet, which was a wooden racing plane. Except for the engine and landing gear, the Mosquito was comprised of wood, offering strategic advantages. The wooden construction wold save on important metals such as aluminum, it could also be built in converted furniture factories. The Air Ministry was reluctant to adopt the wooden aircraft, but placed orders for 50 planes in March 1940 for reconnaissance use. In November 1940, the Mosquito reached speeds of 630km/h during test flights, demonstrating its potential and quickly prompting additional orders of 150 planes. The Mosquito PR Mk. I reconnaissance plane was first deployed in July 1941; the B Mk. IV bomber started deployment in the Spring of 1942. On May 31, 1942, the Mosquitoes led a daylight raid on Cairn. In September 1942, the Gestapo headquarters in Oslo was bombed. German officials delivering a daytime speech in Berlin were attacked on January 30, 1943. These events demonstrated the Mosquito's ability to carry heavy loads and deliver low altitude surprise attacks with accuracy. The camera equipped PR Mk. IV reconnaissance plane discovered the German Battleship Tirpitz in the Artic Circle and scouted V2 rocket facilities. The Mosquitoes performced their duties with minimal losses, displaying their remarkable abilities. Detailierter Plastikmodellbausatz des Modells Mosquito B Mk.IV/PR Mk.IV im Maßstab 1:72
21,49 €
inkl. Mwst. zuzüglich Versandkosten

1:72 Republic F-84G Thunderjet

Art.Nr.: 300060745 Artikelbezeichnung: 1:72 Republic F-84G Thunderjet Towards the end of World War II, information about advanced aeronautical technology was captured in Germany by the U.S. Forces. One of them was an analysis of the studies carried out by Dr. Alexander Lippisch on delta winged aircraft. Based upon the information, the Douglas firm developed the F4D Skyray, the only operational interceptor with delta wings in the U.S. Navy. Starting the design in 1947, Douglas was awarded a contract for the construction and testing of two prototypes in December 1948. The first prototype took off on its maiden flight in January 1951. The second prototype flew shortly thereafter, and the airframe set two new world records, absolute speed record of 1,211 km/h and 100km closed course record of 1,171km/h, in October 1953. Having numerous improvements and refinements, the first production F4D-1 made its maiden flight in June 1954 and entered squadren service in April 1956. The distinctive 50 degree sweptback wings with round tips were equipped with leading edge slats and trailing edge elevons. A set of trimmers were installed on the inboard trailing edges of the wings. The outer portions of the wings could be folded upwards by oil pressure for carrier stowage. Although the Skyray never saw any combat, it proved its high capability as an interceptor with numerous world records and scramble actions in Taiwan in response to crises in the late 1950's. Detailierter Plastikmodellbausatz des Modells Republic F-84G Thunderjet im Maßstab 1:72
14,99 €
inkl. Mwst. zuzüglich Versandkosten

1:72 Skyray

Art.Nr.: 300060741 Artikelbezeichnung: 1:72 Skyray Towards the end of World War II, many information about advanced aeronautical technology were captured in Germany by the U.S. Forces. One of them was an analysis of the studies carried out by Dr. Alexander Lippisch on delta winged aircraft. Based upon the information, the Douglas firm developed the F4D Skyray, the only operational interceptor with delta wings in the U.S. Navy. Starting the design in 1947, Douglas was awarded a contract for the construction and testing of two prototypes in December 1948. The first prototype took off on its maiden flight in January 1951. The second prototype flew shortly thereafter, and the airframe set two new world records, absolute speed record of 1,211 km/h and 100km closed course record of 1,171km/h, in October 1953. Having numerous improvements and refinements, the first production F4D-1 made its maiden flight in June 1954 and entered squadren service in April 1956. The distinctive 50 degree sweptback wings with round tips were equipped with leading edge slats and trailing edge elevons. A set of trimmers were installed on the inboard trailing edges of the wings. The outer portions of the wings could be folded upwards by oil pressure for carrier stowage. Although the Skyray never saw any combat, it proved its high capability as an interceptor with numerous world records and scramble actions in Taiwan in response to crises in the late 1950's. Detailierter Plastikmodellbausatz des Modells Skyray im Maßstab 1:72
13,79 €
inkl. Mwst. zuzüglich Versandkosten

1:72 USA F. BELL X-1 MACH BUSTER

Art.Nr.: 300060740 Artikelbezeichnung: 1:72 USA F. BELL X-1 MACH BUSTER In dieser Militärflugzeugserie finden Sie alle markanten Merkmale der Meisterstücke aus dem 2. Weltkrieg, moderne Jets und Hubschrauber sind naturgetreu nachgebildet. Man kann sich einen einzigartigen Einblick in die Welt der neuesten Düsenjäger, der Kampfflugzeuge des 2. Weltkrieges auf Seiten der Alliierten und der Achsenmächte verschaffen, dazu die verschiedenen Transporthubschrauber und Kampfhubschrauber zur U-Boot- und Panzerabwehr vergleichen. Hier besitzen Sie ein Fenster zu historischen Luftfahrt. Detaillierter Plastikmodellbausatz des Modells USA F. BELL X-1 MACH BUSTER im Maßstab 1:72
12,69 €
inkl. Mwst. zuzüglich Versandkosten

1:72 Vought F4U-1D Corsair

Art.Nr.: 300060752 Artikelbezeichnung: 1:72 Vought F4U-1D Corsair Designed around the new Pratt & Whitney 2,000HP radial engine and tuning the largest propeller ever attached to a fighter plane, the Vought F4U Corsair became a legend in its own time. The F4U-1 was the first production version of the Corsair. It had an inverted gull wing and a production version of the Corsair. It had an inverted gull wing and a framed canopy with a flat top. However may problems were found soon. For example, the port wing stall often gave the Corsair unstable landing. Anther problem was poor visibility because of its long nose and framed canopy. Therefore F4U-1A: the cockpit was raised about seven inches, the framed canopy was replaced with a semi-bubble design canopy, and the taller tail wheel strut was equipped; was introduced. F4U-1D with clear vision canopy on frameless was introduced later for more visibility. Also the F4U-1D had two pylons under the center wing section that could carry the bombs up to 1,000 ponds and the napalm. Furthermore 5 inch rockets could be carried under each wing. Therefore in1944, the F4U-1D was formally deployed as the first carrier based aircraft of Corsair series. Beginning by placing the F4U 1D as Marine squadrons VMF-124 and VMF 213 aboard the ESSEX on the way to the Phillippines, the F4U-1D was used for attacking Japan as the first operation from U.S. Navy in 1945. About 3,700 amounts of F4U-1D were produced, then it held an established position from U.S. Navy because of its ability and reliance. Detailierter Plastikmodellbausatz des Modells Vought F4U-1D Corsair im Maßstab 1:72
19,99 €
inkl. Mwst. zuzüglich Versandkosten
Versandinformation

Wenn Sie diesen Artikel in den Warenkorb legen, ist die Lieferadresse Ihrer Bestellung auf folgende Länder beschränkt:

nach oben