This website uses cookies. By using the services of this website you consent to the usage of cookies.
OK
Tamiya CarsonMajoretteDickie ToysSchuco 

(AP)REAR TIRE(2pcs.) : 58662

  Warning! Not suitable for children under 14 years.
€24.99
incl. VAT plus P&P

5.8 BCNuts for TRF Dampers *8

Article number: 300042344 Product: 5.8 BCNuts for TRF Dampers *8 ★These steel ball connector nuts are spares for parts in Item 54878 Upgrade Set for TRF Super Short Big Bore Dampers. ★They have a slick metal plating for super smooth motion.   Warning! Not suitable for children under 14 years.
€14.99
incl. VAT plus P&P

630 Ball Bearings *8

Article number: 300054925 Product: 630 Ball Bearings *8 Ball bearings are an excellent first step when tuning up your chassis from box stock, providing more efficient drive and longer lasting fun thanks to less wear and tear on moving parts. The 630 ball bearings in this set are for use in the reduction gears on the G6-01TR and GF-01TR chassis. Item Contents/Information • 630 Ball Bearings x8 • For use in the reduction gears on G6-01TR and GF-01TR chassis    models. Each reduction gear requires two 630 ball bearings –    sixteen total (two of this set) to kit out the GF-01, or twenty-four    (three of this set) to kit out the G6-01. • Compatible with GF-01TR and G6-01TR chassis cars.   Warning! Not suitable for children under 14 years.
€13.69
incl. VAT plus P&P

Adjustable SusMt Bushing

Article number: 300054922 Product: Adjustable SusMt Bushing These components are for use with the recently-announced adjustable suspension mounts (it was also included in those products). Item Contents/Information • Bushings Sprue x1 • The bushings sprue contains 7 pairs of different bushing types,    each type with a different hole for the suspension shafts,    giving a total of 25 potential shaft offset positions, and a range    of toe, roll center and skid angle setups. • For use with TRF419, TB-05 and TA07 chassis cars using    adjustable suspension mounts.   Warning! Not suitable for children under 14 years.
€4.29
incl. VAT plus P&P

Alu Adjustable SepSusMt (A)

Article number: 300054884 Product: Alu Adjustable SepSusMt (A) These parts are a new concept in Tamiya suspension mounts, using different bushings to allow adjustment of the following parameters: toe angle, tread, roll center and skid (caster) angle! There are three different types of mount, each with different dimensions. The bushings sprue contains 7 pairs of different bushing types, each type with a different hole for the suspension shafts, giving a total of 25 potential shaft offset positions. Contents/Information • Aluminum Adjustable Suspension Mount (A-a), (A-b) x1 each • Bushings Sprue x1 • This mount allows settings between XA and C    (toe angles depend upon separate suspension mounts    and bushings used). • Mount has the iconic Tamiya blue anodized finish. • Compatible with TRF419, TA07 and TB-05 chassis cars.   Warning! Not suitable for children under 14 years.
€22.99
incl. VAT plus P&P

Alu Adjustable SepSusMt (E)

Article number: 300054885 Product: Alu Adjustable SepSusMt (E) These parts are a new concept in Tamiya suspension mounts, using different bushings to allow adjustment of the following parameters: toe angle, tread, roll center and skid (caster) angle! There are three different types of mount, each with different dimensions. The bushings sprue contains 7 pairs of different bushing types, each type with a different hole for the suspension shafts, giving a total of 25 potential shaft offset positions. Contents/Information • Aluminum Adjustable Suspension Mount (E-a), (E-b) x1 each • Bushings Sprue x1 • This mount allows settings between C and G    (toe angles depend upon separate suspension mounts    and bushings used). • Mount has the iconic Tamiya blue anodized finish. • Compatible with TRF419, TA07 and TB-05 chassis cars.   Warning! Not suitable for children under 14 years.
€22.99
incl. VAT plus P&P

Alu Adjustable SepSusMt (XB)

Article number: 300054883 Product: Alu Adjustable SepSusMt (XB) These parts are a new concept in Tamiya suspension mounts, using different bushings to allow adjustment of the following parameters: toe angle, tread, roll center and skid (caster) angle! There are three different types of mount, each with different dimensions. The bushings sprue contains 7 pairs of different bushing types, each type with a different hole for the suspension shafts, giving a total of 25 potential shaft offset positions. Contents/Information • Aluminum Adjustable Suspension Mount (XB-a),    (XB-b) x1 each • Bushings Sprue x1 • This mount allows settings between XD and X    (toe angles depend upon separate suspension mounts    and bushings used). • Mount has the iconic Tamiya blue anodized finish. • Compatible with TRF419, TA07 and TB-05 chassis cars.   Warning! Not suitable for children under 14 years.
€22.99
incl. VAT plus P&P

Alu Adjustable SusMt (A)

Article number: 300054881 Product: Alu Adjustable SusMt (A) These parts are a new concept in Tamiya suspension mounts, using different bushings to allow adjustment of the following parameters: toe angle, tread, roll center and skid (caster) angle! There are three different types of mount, each with different dimensions. The bushings sprue contains 7 pairs of different bushing types, each type with a different hole for the suspension shafts, giving a total of 25 potential shaft offset positions. Contents/Information • Aluminum Adjustable Suspension Mount (A) x1 • Bushings Sprue x1 • This mount allows settings between XA and C    (toe angles depend upon separate suspension mounts    and bushings used). • Mount has the iconic Tamiya blue anodized finish. • Compatible with TRF419, TA07 and TB-05 chassis cars.   Warning! Not suitable for children under 14 years.
€16.49
incl. VAT plus P&P

Alu Adjustable SusMt (E)

Article number: 300054882 Product: Alu Adjustable SusMt (E) These parts are a new concept in Tamiya suspension mounts, using different bushings to allow adjustment of the following parameters: toe angle, tread, roll center and skid (caster) angle! There are three different types of mount, each with different dimensions. The bushings sprue contains 7 pairs of different bushing types, each type with a different hole for the suspension shafts, giving a total of 25 potential shaft offset positions. Contents/Information • Aluminum Adjustable Suspension Mount (E) x1 • Bushings Sprue x1 • This mount allows settings between C and G    (toe angles depend upon separate suspension mounts    and bushings used). • Mount has the iconic Tamiya blue anodized finish. • Compatible with TRF419, TA07 and TB-05 chassis cars.   Warning! Not suitable for children under 14 years.
€16.49
incl. VAT plus P&P

Alu Adjustable SusMt (XB)

Article number: 300054880 Product: Alu Adjustable SusMt (XB) These parts are a new concept in Tamiya suspension mounts, using different bushings to allow adjustment of the following parameters: toe angle, tread, roll center and skid (caster) angle! There are three different types of mount, each with different dimensions. The bushings sprue contains 7 pairs of different bushing types, each type with a different hole for the suspension shafts, giving a total of 25 potential shaft offset positions. Contents/Information • Aluminum Adjustable Suspension Mount (A) x1 • Bushings Sprue x1 • This mount allows settings between XA and C    (toe angles depend upon separate suspension mounts    and bushings used). • Mount has the iconic Tamiya blue anodized finish. • Compatible with TRF419, TA07 and TB-05 chassis cars.   Warning! Not suitable for children under 14 years.
€16.49
incl. VAT plus P&P

GF-01 Full Ball Bearing Set

Article number: 300054924 Product: GF-01 Full Ball Bearing Set Highly efficient, smooth power awaits with the installation of this set of ball bearings that includes just the right number to fully kit out the GF-01 chassis. Set Contents/Information • 1150 Ball Bearings x24 • 850 Ball Bearings x2 • Install in place of kit standard plastic and metal bearings. • Compatible with GF-01 chassis models.   Warning! Not suitable for children under 14 years.
€35.99
incl. VAT plus P&P

Lunch Box Mini Clear Body

Article number: 300054927 Product: Lunch Box Mini Clear Body This is an unpainted version of the body parts for the Lunch Box Mini (Item 57409). If you damaged your body with crazy wheelie driving, or just want an alternative paint job to the pre-painted yellow version, this is the product for you! • Lightweight and durable 0.8mm thickness polycarbonate. • Includes stickers to decorate the body and paint masking stickers for use in the painting process. • Body catches are not included. • Compatible with SW-01 chassis models.   Warning! Not suitable for children under 14 years.
€13.89
incl. VAT plus P&P

M-08 Concept Carb BM Base

Article number: 300054908 Product: M-08 Concept Carb BM Base Cut down on body wobble with unshakeable body mounts thanks to this lightweight yet rigid and durable 2.5mm thickness carbon fiber component. Item Contents/Information • Carbon Body Mount Base x1 • This part provides a base for the dual rear body mounts,    giving secure attachment and minimizing body wobble. • Damper mount spacer is also included.   Warning! Not suitable for children under 14 years.
€12.59
incl. VAT plus P&P

M-08 Concept Carb DS TRF Dpr

Article number: 300054909 Product: M-08 Concept Carb DS TRF Dpr Make your M-08 Concept chassis car compatible with high-performance TRF dampers using the rigid and lightweight 3mm thickness carbon fiber damper stays in this set. Set Contents/Information • Carbon Damper Stay (Front) x1 • Carbon Damper Stay (Rear) x1 • Damper stays have more holes (Front: 4 each side,    Rear: 6 each side) than kit standard parts, for greater    freedom of setup. • Small parts for attachment are also included. • Compatible with M-08 Concept chassis cars and    TRF dampers 53571, and 42102.   Warning! Not suitable for children under 14 years.
€26.89
incl. VAT plus P&P

Quick Hose Joint

Article number: 300074561 Product: Quick Hose Joint Repeatedly hooking up your airbrushes to the hose and air supply can be something of a pain when you need more than one airbrush for a job. Say goodbye to those worries, with the Quick Hose Joint, which allows you to connect airbrush and hose with a single touch – simply slot in to connect and slide the center section to detach! Item Contents/Information • Quick Hose Joint x1 • Plugs x2 • Joint size: Type-S (PF-1/8) • Compatible with all Tamiya Spray-Work series airbrushes. Spray-Work Basic Airbrush requires separately sold Connector Joint (Item 74536). • Not compatible with Tamiya Badger airbrushes, air cans or Basic Compressor.   Warning! Not suitable for children under 14 years.
€22.99
incl. VAT plus P&P

Quick Hose Joint Plugs *2

Article number: 300074562 Product: Quick Hose Joint Plugs *2 These are replacement plug sections for the Quick Hose Joint, which allows you to (dis)connect airbrush and hose with a single touch – simply by sliding its center section! Item Contents/Information • Quick Hose Joint Plugs x2 • Compatible with Item 74561   Warning! Not suitable for children under 14 years.
€10.49
incl. VAT plus P&P

SSBB Damper Caps (5.8 Ball) *4

Article number: 300042343 Product: SSBB Damper Caps (5.8 Ball) *4 ★These caps are for use in unison with Items 54871 and 42344, to give your TRF Super Short Big Bore Dampers a performance boost, and enhance the range of setups at your disposal.   Warning! Not suitable for children under 14 years.
€8.99
incl. VAT plus P&P

TB-05 Adjustable Ackerman Set

Article number: 300054923 Product: TB-05 Adjustable Ackerman Set Fine-tuning your Ackerman steering angles can make all the difference to your chassis handling, and that is exactly what you can do with this new adjustable set for the TB-05 PRO chassis. The mainly aluminum components allow three different Ackerman settings to experiment with. Set Contents/Information • The aluminum steering arms and bridge in this set can    be used to replace kit-standard plastic steering linkage parts. • 3 Ackerman settings are available: kit-standard / intermediate /    aggressive. These are achieved by interchanging the three    included bearing holder components, which have holes of    different offsets. • The aggressive setup is roughly equivalent to that of the    TA07 PRO chassis, with superior initial steering response. • Aluminum parts have the iconic Tamiya blue anodized finish. • Compatible with TB-05 PRO chassis cars.   Warning! Not suitable for children under 14 years.
€73.99
incl. VAT plus P&P

TB-05 Alu. R Damper Stay Mt

Article number: 300054905 Product: TB-05 Alu. R Damper Stay Mt Give your TB-05 PRO chassis a firm rear with this aluminum damper stay mount, that promises to provide more secure damper stay attachment. Item Contents/Information • TB-05 Aluminum Rear Damper Stay Mount x1 • Provides more secure damper stay attachment and    ensures your fine setup adjustments are realized in    the rear damper performance. • Lightweight, durable aluminum component has the iconic    Tamiya blue anodized finish. • Use in place of kit standard T2 part. • Compatible with TB-05 PRO chassis cars.   Warning! Not suitable for children under 14 years.
€24.99
incl. VAT plus P&P

TB-05 Univ Prop Shaft (FM)

Article number: 300054901 Product: TB-05 Univ Prop Shaft (FM) Smooth power for your shaft-driven TB-05 PRO chassis car awaits with this set of parts to make a universal propeller shaft for the front motor layout version. Item Contents/Information • 90mm Aluminum Propeller Shaft (rear) x1 • 42mm Aluminum Propeller Shaft (front) x1 • Cross joints, input shafts and other small parts are included. • These parts replace kit standard propeller shafts and pilot shafts. • Newly-designed universal joint propeller shafts will give smooth,    efficient power.   Warning! Not suitable for children under 14 years.
€30.49
incl. VAT plus P&P

TB-05 Univ Prop Shaft (RM)

Article number: 300054902 Product: TB-05 Univ Prop Shaft (RM) Smooth power for your shaft-driven TB-05 PRO chassis car awaits with this set of parts to make a universal propeller shaft for the rear motor layout version. Item Contents/Information • 122mm Aluminum Propeller Shaft x1 • Cross joint, input shaft and other small parts are included. • These parts replace kit standard propeller shaft and pilot shaft. • Newly-designed universal joint propeller shaft will give smooth,    efficient power.   Warning! Not suitable for children under 14 years.
€17.99
incl. VAT plus P&P

TRF419 Alu R Upright 2deg

Article number: 300042341 Product: TRF419 Alu R Upright 2deg ★These precision uprights are crafted in aluminum and give 2 degrees of toe-in for a nimble, responsive drive. ★Durable aluminum ensures minimum effects from the stresses of cornering. ★Parts have a stylish blue anodized finish. ★Compatible with TRF418 design and reversible suspension setups.   Warning! Not suitable for children under 14 years.
€39.99
incl. VAT plus P&P

TRF419 Alu R Upright 3deg

Article number: 300042342 Product: TRF419 Alu R Upright 3deg ★These precision uprights are crafted in aluminum and give 3 degrees of toe-in for a nimble, responsive drive. ★Durable aluminum ensures minimum effects from the stresses of cornering. ★Parts have a stylish blue anodized finish. ★Compatible with TRF418 design and reversible suspension setups.   Warning! Not suitable for children under 14 years.
€39.99
incl. VAT plus P&P

TRF419 Suspension Upgrade Set

  Warning! Not suitable for children under 14 years.
€79.99
incl. VAT plus P&P

TRF420 3x25/22 SusShaft *2each

Article number: 300051637 Product: TRF420 3x25/22 SusShaft *2each These are spare suspension shafts that are used in the TRF420, Tamiya’s state-of-the-art 4WD touring car race chassis. They are for use with the new TRF420 design suspension arms. • 3x25mm Suspension Shafts x2 • 3x22mm Suspension Shafts x2 • Stainless steel material. • At 3mm in diameter, they are thicker than 2.6mm parts on previous chassis for a sturdier suspension setup. • Previous shafts had a cutaway flat section to fasten the grub screw on; these have a continuous groove to make it easier to fasten. • Compatible with cars using Item 51639 TRF420 D Parts (Suspension Arms).   Warning! Not suitable for children under 14 years.
€3.59
incl. VAT plus P&P

TRF420 3x43mm Sus Shafts *4

Article number: 300051636 Product: TRF420 3x43mm Sus Shafts *4 These are spare suspension shafts that are used in the TRF420, Tamiya’s state-of-the-art 4WD touring car race chassis. • 3x43mm Suspension Shafts x4 • Stainless steel material. • Compatible with TRF420, TB Evo.6*, FF-03 EVO* and TG10-Mk.2FN* chassis cars. • Note: *These chassis can only use the shafts on the front (2pcs.).   Warning! Not suitable for children under 14 years.
€3.59
incl. VAT plus P&P

TRF420 B Parts (Bumper)

Article number: 300051644 Product: TRF420 B Parts (Bumper) One too many crashes? Not a problem! Tamiya has this spare bumper designed as a replacement part for the TRF420 kit. • TRF420 B Parts x1 • The bumper design has been altered so as not to impact upon the chassis’ roll characteristics. • New body mounts are 2mm offset; change their attachment position for different body mount location to fine-tune your car's center of balance. • Compatible with TRF420 chassis cars.   Warning! Not suitable for children under 14 years.
€8.99
incl. VAT plus P&P

TRF420 C Parts Front Uprights

Article number: 300051638 Product: TRF420 C Parts Front Uprights These are the spare steering uprights for the TRF420 race car chassis. They feature the new 2-part front upright designs which utilize separate arm and bearing housing components. You can also use these new uprights on existing Tamiya touring car racing platforms. • TRF420 C Parts x1 • Components are molded in carbon fiber-reinforced plastic for superior rigidity. • Compatible with TRF420, TRF419, TA07 and TB-05 PRO chassis cars.   Warning! Not suitable for children under 14 years.
€5.79
incl. VAT plus P&P

TRF420 D Parts Sus Arms

Article number: 300051639 Product: TRF420 D Parts Sus Arms These are spare suspension arm parts for the TRF420 racing chassis kit. • TRF420 D Parts x2 • Components are molded in carbon fiber-reinforced plastic for superior rigidity. • The tweaked design uses aluminum inserts for damper attachment. Using different inserts (sold separately) allows adjustment of lever ratio, with three different setups possible. • Rear arms are 3mm offset to the rear, allowing the shorter TRF420 lower deck (while keeping the same wheelbase) and giving increased rear traction. • For use with 3mm diameter shafts (sold in Item 51637). • Compatible with TRF420, TRF419*, TA07* and TB-05 PRO* chassis cars. • Note: *Rear arms have different offset to kit standard parts, and require adjustment of wheelbase using spacers, etc.   Warning! Not suitable for children under 14 years.
€8.99
incl. VAT plus P&P

TRF420 Diff Pulley&Case (37T)

Article number: 300051643 Product: TRF420 Diff Pulley&Case (37T) This is a spare pulley plastic part for the TRF420 racing chassis machine. Use it to replace worn out pulleys in your drivetrain to keep your car running efficiently and smooth. • TRF420 37T Differential Pulley x1 • TRF420 Differential Case x1 • 0.2mm & 0.3mm Shims x2 each • The new design not only provides a weight savings of 1.5g, but also provides less oil leakage compared to previous designs. • Compatible with TRF420 and TA07 chassis cars.   Warning! Not suitable for children under 14 years.
€6.89
incl. VAT plus P&P

TRF420 E Parts Rear Uprights

Article number: 300051640 Product: TRF420 E Parts Rear Uprights These are spare rear upright parts for the TRF420 racing car chassis. • TRF420 E Parts x1 • Components are molded in carbon fiber-reinforced plastic for superior rigidity. • Bearing positions are precisely aligned for maximum efficiency. • For use with 3mm diameter shafts (sold in Item 51637). • Compatible with cars using Item 51639 TRF420 D Parts (Suspension Arms).   Warning! Not suitable for children under 14 years.
€6.89
incl. VAT plus P&P

TRF420 F Direct Pulley (37T)

Article number: 300051642 Product: TRF420 F Direct Pulley (37T) This is a spare front direct pully component to the TRF420. Use this item to replace damaged or worn parts in your drivetrain. • TRF420 Front Direct Pulley x1 • 0.2mm & 0.3mm Shims x2 each • Front direct pulley and direct holder are an integrated plastic part for a weight savings of 2g compared to separate parts used on previous generation of TRF chassis. • Direct cups are now screw-attached (was 2x9.8mm pins on previous chassis), allowing their replacement without the need to remove the direct pulley component. • Compatible with TRF420 and TA07 chassis cars.   Warning! Not suitable for children under 14 years.
€11.69
incl. VAT plus P&P

TRF420 F Parts 4deg HC

Article number: 300051641 Product: TRF420 F Parts 4deg HC These are spare hub carrier parts for the TRF420 racing car chassis. They are an improved and more durable design compared to the previous design found in the TRF417/418/419 era of cars. • TRF420 F Parts x1 • Components are molded in carbon fiber-reinforced plastic for superior rigidity. • The design was revised specifically for the TRF420 chassis, with greater resistance to shocks and crashes. • Upper and lower flanged tubes are now identical. • For use with 3mm diameter shafts (sold in Item 51637). • Compatible with cars using Item 51639 TRF420 D Parts (Suspension Arms).   Warning! Not suitable for children under 14 years.
€7.19
incl. VAT plus P&P

TRF420 K Parts (Bearing Hldrs)

Article number: 300051645 Product: TRF420 K Parts (Bearing Hldrs) • TRF420 K Parts x1 • Bearing holders (employed on gear diff and front direct pulley) redesigned for the TRF420 chassis, in order to provide even more precise location and a super-smooth drivetrain. • Compatible with TRF420 chassis cars.   Warning! Not suitable for children under 14 years.
€8.59
incl. VAT plus P&P

TRF420 Rear Belt (62T)

Article number: 300051646 Product: TRF420 Rear Belt (62T) • TRF420 Rear Belt (62T) x1 • This belt is made from reinforced, stretch-resistant material. • It is recommended to change belts periodically to maintain optimum performance. • Compatible with TRF420 chassis cars.   Warning! Not suitable for children under 14 years.
€7.19
incl. VAT plus P&P

TRF420 Wheel Axles *2

Article number: 300042346 Product: TRF420 Wheel Axles *2 These are the lightweight axles found on the TRF420 racing chassis touring car kit. They can be used as spare parts on the TRF420 or as Hop-Up Option parts on any of Tamiya’s TA or TB touring car machines. • TRF420 Wheel Axles x2 • Each axle weighs approximately 1.5g less than counterparts in Item 51445 TRF417 Wheel Axles (2pcs.), for less pressure and wear on tires. • Compatible with TRF420, TRF419, TA07 and TB-05 PRO chassis cars.   Warning! Not suitable for children under 14 years.
€11.49
incl. VAT plus P&P
incl. VAT plus P&P

0.4 Pinion Gear (40T, 41T)

0.4 Pinion Gear (40T, 41T)
€18.99
incl. VAT plus P&P

0.4 Pinion Gear (46T, 47T)

0.4 Pinion Gear (46T, 47T)
€19.99
incl. VAT plus P&P

0.6 Alu Pinion Gear 16T Hard coat.

Article number: 300054464 Product: 0.6 Alu Pinion Gear 16T Hard coat. These precision 06 module aluminum pinion gears feature hard coated surfaces to ensure superb durability. In addition, the teeth feature a special shape to reduce friction loss and noise from gear meshes.
€10.79
incl. VAT plus P&P

10-Spoke Wheels Jaccs Accord white (2) 2

10-Spoke One-Piece Wheels *2
€11.49
incl. VAT plus P&P

10mm Shim Set *10 x 3 types

Article number: 300053588 Product: 10mm Shim Set *10 x 3 types These shim sets may be used to reduce suspension or wheel axle slop in any of Tamiya's on or off-road vehicles. Perfect for super fine tuning your race vehicle build. ?10mm Shim Set *10 x 3 types
€12.79
incl. VAT plus P&P

10T PINION GEAR 58110

Lieferumfang: 1 Stück Bohrung 3,17mm Länge 23mm Passend für Bush Devil / King Blackfoot   Warning! Not suitable for children under 14 years.
€5.79
incl. VAT plus P&P

19T Pinion Gear 57723

19T Pinion Gear for 57723   Warning! Not suitable for children under 14 years.
€5.29
incl. VAT plus P&P

1:10 Disc-Wheels Rally (2) gold 26mm

Wheels (2 pcs.) for 58333   Warning! Not suitable for children under 14 years.
€6.19
incl. VAT plus P&P

1:10 Dish-Wheels white 24mm (4)

Lieferumfang: 4 Stück Felgenmitnehmer 12mm 6-Kant Felgenbreite 24mm / MN (Medium-Narrow) Offset 0mm
€11.49
incl. VAT plus P&P

1:10 M-Chassis Inner Sponge Kit (4) gre

Lieferumfang: 4 Stück Passend für M-Chassis Ausführung Baukasten
€4.79
incl. VAT plus P&P

1:10 Med. Narrow Racing Slicks 24mm(2)

Medium-Narrow Racing Slicks
€11.49
incl. VAT plus P&P

1:10 Medium-Narrow Soft Inner Foam Blue

Article number: 300053434 Product: 1:10 Medium-Narrow Soft Inner Foam Blue These are rubber tire inserts designed to fit 24mm wheels. They come in pairs and the blue color easily identifies the insert as a soft firmness. Note: The firmer the insert the less traction your tire will yield. The softer the insert the more traction you will get out of your tires, but they will also wear out faster. Medium-Narrow Soft Inner *2
€8.29
incl. VAT plus P&P

1:10 MN Dish Wheel 24mm (4) Offset+2

Lieferumfang 4 Stück Felgenmitnehmer 12mm 6-Kant Felgenbreite 24mm / MN Medium-Narrow Offset +2mm
€12.79
incl. VAT plus P&P

1:10 Racing Radial Tires (2) 26mm

Celica Racing Radial Tire
€12.99
incl. VAT plus P&P

1:10 Racing Radial Tires 24mm (2) MN

M-Narrow Racing Radial Tires
€13.49
incl. VAT plus P&P

1:10 Racing Wing (b) universal

Article number: 300054458 Product: 1:10 Racing Wing (b) universal For touring car races, it is essential to equip a rear wing that matches the body in terms of styling and down force effect. The racing wing version type B offers a flat horizontal wing element design and is made of polycarbonate material.
€9.89
incl. VAT plus P&P

1:10 Rally Dish Wheel white (4) 26mm/+2

Ford Focus RS WRC 03 Wheels*4
€12.49
incl. VAT plus P&P

1:10 Rallye-Cockpit-Set Left-Hand-Drive

Article number: 300054491 Product: 1/10 Rallye-Cockpit-Set Left-Hand-Drive This is an updated version of Item 50463 (RC Rally Car Cockpit Set). The cockpit set can be fitted to Tamiya 1/10 rally car body sets to add an extra level of realism. Thanks to the newly-included urethane sponge, it is compatible with a large range of chassis widths. It can be painted as users like using plastic model paints also available through Tamiya. Set contents: • Cockpit and helmet x1 • Urethane sponge bag x1 • Newly-designed stickers • Parts to attach cockpit to model.
€21.99
incl. VAT plus P&P

1:10 Spoke Wheel white 26mm (2)

Lieferumfang: 2 Stück Felgenmitnehmer 12mm 6-Kant Felgenbreite 26mm   Warning! Not suitable for children under 14 years.
€8.39
incl. VAT plus P&P

1:10 Sticker-Set TRF black/white

Article number: 300042164 Product: 1:10 Sticker-Set TRF black/white This sticker sheet comes with various TRF and Tamiya logos.
€5.99
incl. VAT plus P&P

1:10 Tires Rally Block-Type (2)

Article number: 300050476 Product: 1:10 Tires Rally Block-Type (2) The Tamiya Rally Block tire are packaged in a pair. These are the stock replacement tires that are found in many of Tamiya's Rally kit R/C cars. They feature a cross block design and are made of durable rubber material. These tires will fit standard Tamiya touring car wheels (26mm width). Rally Block Tires
€15.49
incl. VAT plus P&P

1:10 Tires Slick Kit-Type (2)

Article number: 300050454 Product: 1:10 Tires Slick Kit-Type (2) These vinyl tires are included stock in most Tamiya touring sedans that use 26mm wheels. These are the stock replacements that have many uses. Due to their low grip compared to higher performance Tamiya tires they are excellent for drifting purposes on asphalt and concrete surfaces. Racing Slick Tires *2
€13.49
incl. VAT plus P&P

1:10 Touring Car Cockpit Set Left-Hand

Article number: 300054298 Product: 1/10 Touring Car Cockpit Set Left-Hand This Touring Car Cockpit Set provides scale realism with 190mm 1/10 scale Tamiya R/C touring cars.
€21.99
incl. VAT plus P&P

1:10 TRF TC Springs short black (3)

Article number: 300042168 Product: 1/10 TRF TC Springs short black (3) This short spring set includes three pairs of black-colored springs (soft, medium and hard) to adjust handling with more precision. For easy identification, each spring features a blue (hard), yellow (medium), or red (soft) marking painted at the bottom of the spring.
€12.49
incl. VAT plus P&P

1:10 Twin 5-Sp. Wheels black(4) 26mm/+4

Article number: 300051263 Product: 1:10 Twin 5-Sp. Wheels black(4) 26mm/+4 Wheels included with TT-01 Ferrari FXX are now available as spare parts. Offset 4mm wheels are also expected to fill a demand for wide-tread compatible wheels, which are lacking on the market. these wheels are 26mm wide. *Compatible with TT-01 chassis. Twin 5-Spoke Wheel 26mm/+4 4pcs
€14.99
incl. VAT plus P&P

1:10 Wheel 18-Spoke grey 24 mm (4)

M-Narrow 18-Spoke Wheels 0
€11.49
incl. VAT plus P&P

1:10 Wheel Subaru Impreza gold 24,5mm(4)

M-Narrow 10-Spoke Wheels 0
€12.79
incl. VAT plus P&P

1:10 Wide Inner Sponge 30mm (2) Hard

Wide Inner Sponge(Hard)
€4.19
incl. VAT plus P&P

1:10 Y-Spoke Wheels grey 26mm (2)

Wheel (2 pcs.) for 58162 (+2)   Warning! Not suitable for children under 14 years.
€7.19
incl. VAT plus P&P

1pc Alu. Skid Guard (WR-02CB)

Article number: 300054867 Product: 1pc Alu. Skid Guard (WR-02CB) This is a lightweight and rigid one-piece aluminum front skid guard for big wheel chassis models, replacing kitstandard molded part. Its skid angle of 30 degrees helps your model barrel over rough terrain, insulating chassis components against bumps and shocks. Item Contents/Information • Skid Guard x1 • Used in place of kit-standard F4 or M8 which holds U-shaped shaft in place. • Can be used in tandem with kit-included front bumper parts. • Two 3x10mm screws for attachment are included. • Compatible with WR-02, WR-02C, WR-02G, GF-01, G6-01 and WR-02CB chassis models.   Warning! Not suitable for children under 14 years.
€18.29
incl. VAT plus P&P

2-Piece 5-Spoke Wheels *2 Bla

Article number: 300054854 Product: 2-Piece 5-Spoke Wheels *2 Bla These are two-piece 5-spoke wheels that incorporate a chrome outer wheel and a black colored spoke. • 2-Piece 5-Spoke Wheels x2 • Screws for attachment included. • Compatible with TT-01, TT-02 (excludes TT-02 Type-S) and CC-01 chassis models. • Compatible with cars using 26mm width tires.   Warning! Not suitable for children under 14 years.
€9.99
incl. VAT plus P&P

2-Piece Mesh Wheels *2 Bla

Article number: 300054794 Product: 2-Piece Mesh Wheels *2 Bla This is a two-piece mesh wheel set. The wheel rim itself is chrome plated while the mesh centerpiece is molded in black. The set is a color variation of the classic wheels from Item 50548, which include a gold color center piece. Item Contents •Hubcap Sections (Black) x2 •Rim Sections (Plated) x2 •Assembly required. 2 types of offset can be achieved, depending upon the assembly method used. •Compatible with 1/10 scale R/C touring car models using narrow 26mm tires.
€9.99
incl. VAT plus P&P

20x230 Sponge Tape 2mm*1/3mm*2

Article number: 300042331 Product: 20x230 Sponge Tape 2mm*1/3mm*2 Make sure that your R/C car has no gap between its polycarbonate body and urethane bumper, using this handy sponge tape! This will help protect the body from damage, prolonging its life, and even reduce "wobble" while you are driving. • 2mm-Thickness Sponge Tape (20x230mm) x1 sheet • 3mm-Thickness Sponge Tape (20x230mm) x2 sheets   Warning! Not suitable for children under 14 years.
€6.29
incl. VAT plus P&P

24mm 18-Spk Wheels 0 FlYel *4

Article number: 300054852 Product: 24mm 18-Spk Wheels 0 FlYel *4 - 18-spoke wheels are a perfect option for racing cars. - These components are molded in jazzy fluorescent yellow. - Offset: 0   Warning! Not suitable for children under 14 years.
€6.99
incl. VAT plus P&P

24mm Mesh Wheels +2 FlYel *4

Article number: 300054850 Product: 24mm Mesh Wheels +2 FlYel *4 This is a color variation of Tamiya’s classic mesh wheel set for touring and sports car R/C kit models. The original set of wheels come in white, whereas these come in a vibrant shade of yellow. • Mesh Wheels (Yellow) x4 • Wheels have an offset of +2. • Compatible 1/10 scale 24mm width touring car tires: Items 51023, 51049, 53433, 53705, 54256 and 54293. • Compatible tire inserts: Items 53434, 53435, and 53582.
€6.99
incl. VAT plus P&P

24mm RallyDish Wheels 0 Whi *4

Article number: 300054851 Product: 24mm RallyDish Wheels 0 Whi *4 This spare wheel set depicts the spoke wheel commonly seen on Subaru Impreza R/C models. • Rally Dish Wheels (White) x4 • Zero offset. • Compatible with 1/10 scale touring car tires: Items 51023, 51049, 53433, 53705, 54256 and 54293.   Warning! Not suitable for children under 14 years.
€6.99
incl. VAT plus P&P

24mm Twin5spk Wheels +2 Bla *4

Article number: 300054853 Product: 24mm Twin5spk Wheels +2 Bla *4 - Twin-spoke design wheels are a perfect match for super sports car models. - These components are molded in black. - Offset: +2   Warning! Not suitable for children under 14 years.
€7.19
incl. VAT plus P&P

2mm C-Ring-Set (8)

  Warning! Not suitable for children under 14 years.
€1.99
incl. VAT plus P&P

2mm E-Ring (15)

2mm E-Ring *15
€2.89
incl. VAT plus P&P

2pc.Wheels 5-Spoke Chrome/white (2) 26 m

5-Spoke 2-piece Wheels *2
€15.49
incl. VAT plus P&P

2pc.Wheels 5-Spoke Chrome/white (2) 30mm

5-Spoke 2-piece Wide Wheel *2
€19.49
incl. VAT plus P&P

2WD Rib-Spike F Tires *2

Article number: 300054896 Product: 2WD Rib-Spike F Tires *2 These classic hybrid tires, which were previously sold as Item 53083 and are the same as those in Item 47381 Super Astute (2018), are given a welcome re-issue with a new item number! They will be great front tire options for your 2WD buggies, giving crisp cornering. Item Information/Contents • Previous Item No.: 53083 • 2WD Rib-Spike Front Tires x2 • Hybrid tires feature 2 rows of round spikes and a rib,   for optimal cornering grip. • Compatible with 2WD buggies (including DT02 and DT-03)   using wheels in Item 54680.   Warning! Not suitable for children under 14 years.
€9.49
incl. VAT plus P&P

2x10mm Shaft (10) Wheelhub

2x10mm Shaft *10
€3.79
incl. VAT plus P&P

2x8mm Tapping Screw (10) Differential

2x8mm Tapping Screw *10
€3.09
incl. VAT plus P&P

3645 R. HBR Sponge Tires

3645 R. HBR Sponge Tires
€25.99
incl. VAT plus P&P

37T Alu 1-Way Pulley

Article number: 300042309 Product: 37T Alu 1-Way Pulley This 37T one-way pulley is an aluminum version of the standard plastic part found in many of Tamiya's 4WD touring car machines. It provides more efficient drive, and also helps to improve grip through medium-speed corners. It also has an HL (high lubrication) coating for supremely smooth transfer of power. •37T Aluminum One-Way Pulley x1 •Compatible with TRF419, TRF419X, TRF418 and TA07 chassis, plus chassis fitted with direct coupling (spool).
€32.99
incl. VAT plus P&P

3mm Grub Screw (10)

3mm Grub Screw *10
€4.79
incl. VAT plus P&P

3mm Lightweight Diff Ball Set

Article number: 300053379 Product: 3mm Lightweight Diff Ball Set These 3mm Lightweight Diff Balls are twice as hard as steel with significantly less weight, these replacement differential balls provide smoother operation and longer life. Set includes 10 3mm differential balls. 3mm Lightweight Diff Ball Set
€13.99
incl. VAT plus P&P

3mm O-Ring black (10)

  Warning! Not suitable for children under 14 years.
€1.79
incl. VAT plus P&P

3mm Shim-Set (3x10) 0.1/0.2/0.3mm

Article number: 300053585 Product: 3mm Shim-Set (3x10) 0.1/0.2/0.3mm These are 3mm shims that may be used in many of Tamiya’s RC cars. They are especially useful to remove unwanted suspension play when used on 3mm suspension shafts. The set has .1, .2, and .3mm thickness shims. ?3mm Shim Set *10 x 3 types
€10.49
incl. VAT plus P&P

3mm Washer (15)

3mm Washer *15
€2.69
incl. VAT plus P&P

3x106mm Alu. Turnbuckle Shaft

Article number: 300054756 Product: 3x106mm Alu. Turnbuckle Shaft This lightweight aluminum steering turnbuckle shaft is designed to be used on the Tamiya M-07 Concept machine. It replaces the steel shaft that comes standard in the kit, thereby reducing weight. It connects the M-07’s steering servo to the steering linkage. The turnbuckle design make steering rod length adjustments a breeze with the use of a Tamiya turnbuckle wrench. •3x106mm Aluminum Turnbuckle Shaft x1 •Legendary Tamiya blue anodized finish. •Weight savings of over 2g from the kit standard part. •Compatible with M-07 Concept chassis.
€7.49
incl. VAT plus P&P
Shipping Information

If you put these articles in your shopping cart, the shipping address of your order is restricted to the following countries:

to the top