This website uses cookies. By using the services of this website you consent to the usage of cookies.
OK
Tamiya CarsonMajoretteDickie ToysSchuco 

1/48 SS-100 & 88mm Flak37

Article number: 300037027 Product: 1/48 SS-100 & 88mm Flak37 The SS-100 was a heavy tractor used by German forces from the mid-1930s, originally a commercial design but also effective in military service throughout WWII thanks to an ability to haul up to 20 tons. Among a wealth of candidates, one of its passengers really stands out - the mighty 88mm gun, which was used against Allied forces with devastating effect. The Flak37 was a powerful 1937 variant, with sights updated from predecessors, and a large shield added from 1940. About the Model ★This is a 1/48 scale plastic model assembly kit set. SS-100 length: 114mm; 88m gun length (towed): 169mm. ★The sturdy SS-100 form is recreated with aplomb. ★Integrated cabin parts make for a fuss-free, accurate assembly. ★The complex Flak37 88mm gun is captured with realism. ★Transport wagon is also depicted. ★Comes with five figures and three marking options. *88mm gun parts are a product of Italeri.   Warning! Not suitable for children under 14 years.
€40.99
incl. VAT plus P&P

1/48 Sturmtiger

Article number: 300032591 Product: 1/48 Sturmtiger The Tamiya 1/35 Military Miniatures Sturmtiger is a classic kit that has been around for decades. The 1/48 scale version has received all new tooling and further extends the long line-up of kits offered in this smaller scale! The Sturmtiger was a seldom-seen variant of the Tiger I, using existing chassis and suspension to mount a mammoth 38cm caliber mortar for use against buildings and other fortifications in urban warfare. Only an estimated 18 were ever produced, between August and December 1944, and they were somewhat unwieldy in that they weighed around 65 tons. Nonetheless, they would still have proved a frightening foe to those who encountered them in the Battle of the Bulge, the Warsaw Uprising and the invasion of the German homeland.
€29.99
incl. VAT plus P&P

1/6 Honda CRF1000L Africa Twin

Article number: 300016042 Product: 1/6 HONDA CRF 1000L Africa Twin Enduro This large-scale motorcycle series model depicts the CRF1000L Africa Twin, Honda's modern adventure touring motorcycle inspired by their legendary 4-time Paris-Dakar champion off-road bike. The CRF1000L was released in 2015 and boasts a 998cc parallel-twin engine with a reported 92hp, plus an array of technology such as dual clutch transmission, selectable torque control for slippery surfaces, and ABS brakes. This assembly kit captures the bikes most minute detail in every way. It is sure to wow the most discerning model enthusiast at this very large scale!   Warning! Not suitable for children under 14 years.
€224.99
incl. VAT plus P&P

1/72 Bf-109 G-6 Messerschmitt

Article number: 300060790 Product: 1/72 Bf109 G-6 In great news for modelers in the compact 1/72 scale, the "Gustav" is to be released as a Tamiya kit! With over 30,000 produced, the Messerschmitt Bf109 is the most prolifically manufactured fighter in history; of its variants, the G-6 was the most numerous at 13,000 aircraft. In response to improving Allied foes in the air, Bf109 G aircraft had the more powerful DB605 engine, and from the G-6 were equipped with dual 13mm MG131 machine guns that required the distinctive bulges on either side of the cockpit cowling known as "Beule." Some were even given a 20mm cannon gondola under each wing for further improved firepower. The Bf109 G-6 was deployed on both the Western and Eastern fronts, in particular dominating Soviet adversaries as it continued in service through to the end of WWII. About the Model - This is a 1/72 scale plastic model assembly kit. - The striking, refined form of the G-6 variant Bf109 is captured, including depictions of the Beule bulges. - This product takes inspiration from the highly accurate 1/48 model (Item 61117). Please note that engine cowlings are depicted closed. - The cockpit is inserted after left and right fuselage halves have been put together. It has an accurate interior with streamlined assembly. - Canopy can be assembled in open or closed state. - Landing gear struts have a solid attachment point for accurate attachment angle and position. - Comes with optional drop tank parts. - 2 marking options are planned - JG51 (with distinctive eye marking on the Beule) and JG54. Detailed Plastic Kit   Warning! Not suitable for children under 14 years.
€23.99
incl. VAT plus P&P
incl. VAT plus P&P

1/72 Ki-61-Id Hien SP & Decals

Article number: 300025420 Product: 1/72 Ki-61-Id Hien SP & Decals This special limited edition version of the Ki-61-Id Hien in 1/72 (previously released as a "white box" Item 10315 in Japan and the U.S.) is now re-issued with a new full color package! With molded parts given a matte silver color plating to represent the bare duralumin seen on aircraft such as the 244th Air Group (Option B in the kit), and camouflage decals included (they are sold separately from the standard kit Item 60789), this is superb value and sure to be an eye-catcher when built up! About the Model • This is a 1/72 scale plastic model assembly kit.   Approx. length: 125mm, approx. wingspan: 167mm. • The model accurately depicts the Ki-61-Id Hien with   elongated nose and slimline fuselage. • Differences from Item 60789: A and B parts are given a   matte silver color plated finish; camouflage decals from   Item 12683 are included; dedicated instructions for handling   of plated parts are included. • Fuss-free assembly without sacrificing detail was our designer’s   watchword when creating this kit. • The cockpit parts breakdown is changed from its 1/48 scale   counterpart, and can be pre-assembled then slotted into the   already-built fuselage sides. • The fuselage underside radiator/oil cooler is artfully recreated   with a single piece. • One-piece canopy offers excellent fit with fuselage. • Clear parts are included to recreate light and gun sight components. • Optional Venturi tube and fuel cooler parts are also included.   Warning! Not suitable for children under 14 years.
€32.99
incl. VAT plus P&P

190 E Evo.2 Zakspeed DA TT-01E

Article number: 300058638 Product: 190 E Evo.2 Zakspeed DA TT-01E This is a R/C car replica of the 1992 Diebels-Alt sponsored Team Zakspeed Mercedes-Benz 190 E 2.5-16 Evo.II as it competed in the 1992 DTM racing series in Germany. Tamiya has faithfully reproduced this sleek racing machine in 1/10 scale on the TT-01 Type E entry-level on-road chassis. The TT-01E chassis incorporates many features to make it easy for the new R/C kit builder to assemble and learn from. In addition to the TT-01E being an ideal platform to start from, R/C hobbyists can expand its potential by adding many of the Hop-Up Options available to increase the cars speed and performance. The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance. Mounted on the bathtub frame is a fiberglass reinforced nylon upper deck and gear covers improving rigidity, as well as a 3-piece tie rod providing smooth steering action. The low center of gravity, highly balanced design, 4 wheel double wishbone suspension system, and front and rear differential gears all come together to produce an excellent drive. Gold color 6-spoke wheels are paired with racing slick tires for the finishing touch, while a host of Hop-Up Option parts are available to soup up the TT-01 Type-E!   Warning! Not suitable for children under 14 years.
€144.99
incl. VAT plus P&P

1:10 RC AQROSHOT (DT-03T)

Article number: 300058610, Product: 1/10 RC AQROSHOT (DT-03T) In early 2014 Tamiya introduced the new DT-03 off-road chassis. For 2015 Tamiya introduces the DT-03T, which is a TRUCK variant. The platform is intended as an easy-to-get-started model to encourage young drivers to enter the world of R/C. Its intuitive yet tough design allows hassle-free assembly and gives less experienced users the opportunity to get to grips with R/C model composition and construction. The truck variant allows users to tackle bumpy street or parking lot terrain with its taller stance and wide and low profile road hugging equipped tires. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.
€119.99
incl. VAT plus P&P

1:10 RC Buggy Sand Scorcher 2010 2WD

Article number: 300058452 Product: 1:10 RC Buggy Sand Scorcher 2010 2WD Originally released in 1979, the R/C Sand Scorcher was greatly received from fans around the world with its humorous form and superb mechanism. Keeping true to the basic layout of the original while incorporating many refined parts, this re-released version of the Sand Scorcher will remind you of the original. This model realistically reproduces the unique form of the buggy which was seen at the one-make race at the "Baja 1000" in California, USA. The body is molded in white polystyrene and can be painted with Tamiya plastic model paints. The rear-wheel drive 2WD chassis features realistic and aggressive driving performance that will no doubt excite you. Chassis layout: Chassis features a 2mm thick FRP plate with an aluminum reinforcing plate for strength and flexibility to ensure stability. 4-wheel independent suspension features front double trailing arm and rear swing axle setups, die-cast suspension arms, and oil dampers. Electronics and battery are protected by a durable clear plastic mechanism box. Comes equipped with full ball bearings to reduce friction loss, and mounted on the 3-piece center-lock wheels are grooved front tires and ribbed rear tires that ensure superb off-road performance.   Warning! Not suitable for children under 14 years.
€379.99
incl. VAT plus P&P

1:10 RC Dark Impact 4WD Buggy DF-03

Article number: 300058370 Product: 1/10 RC Dark Impact 4WD Buggy DF-03 This 1/10 scale 4WD buggy is specially designed to excel in off-road buggy racing. It features a mid-rear mounted motor and longitundinally mounted battery for optimum balance for jumping. Battery is inserted through the bottom of the chassis, eliminating need to remove body, which makes routine maintenance easy and quick. High performance shaft drive 4WD combines with suspension system featuring extra long suspension arms for improved stability and off-road handling. About the Model - High performance 1/10 4WD buggy chassis designed   for off-road racing - 4-wheel independent double wishbone suspension   features CVA oil dampers and extra long suspension   arms for improved stability and handling - Includes sealed diff gearbox indispensable for off-road running - Features full ball bearings - Electronic Speed Controller (Not Included) - Includes 540 type motor - Newly designed off-road tires and wheels featured larger   diameter and width, and new tread pattern designed for   excellent running and control on hard dirt tracks - Tires: High Density Spike Tires K (4WD/Front, 62/25),   HighDensity Spike Tires K (Rear, 62/35) - Wheels: Large Dish Wheels (4WD/Front, 62/25),   Large Dish Wheels (Rear 62/35) - 2.94 internal gear ratio.   Warning! Not suitable for children under 14 years.
€219.99
incl. VAT plus P&P

1:10 RC Dual Ridge (TT-02B)

Article number: 300058596 Product: 1:10 RC Dual Ridge (TT-02B) The latest addition to the popular entry level buggy TT-02B chassis line-up is this sharp vehicle, featuring aggressive aerodynamics and a futuristic form that are sure to make it a big hit! The car's name alludes to the body's dynamic twin ridges on the front section. The form is the brainchild of Japanese designer Takayuki Yamazaki. About the model • This is a 1/10 scale R/C model assembly kit. • Features a durable and lightweight polycarbonate body. • The TT-02B Chassis is the buggy evolution of Tamiya's new beginner-friendly TT-02 Chassis. • Bathtub-type frame features longitudinally-placed battery and R/C mechanism placed flat for a low center of gravity. • 4-wheel double wishbone suspension features long arms and CVA shock units, and is combined with highgrip spiked tires to give excellent traction. • Front and rear gearboxes have differentials to ensure smooth cornering. • A wide range of option parts are available to tune up the chassis.   Warning! Not suitable for children under 14 years.
€139.99
incl. VAT plus P&P

1:10 RC Ford F-350 HighLift 4x4 3-Speed

Article number: 300058372 Product: 1/10 RC Ford F-350 HighLift 4x4 3-Speed Electric R/C assembly kit of one of the most representative American pick-up trucks, the Ford F-350. The model features realistic ladder frame, 3-speed transmission and shaft drive 4WD system. Highly detailed injection molded body and large diameter wheels enhance the stylish high-ground-clearance look. Original marking stickers add to the truck's overall realism. Ford F-350 High-Lift Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.
€499.99
incl. VAT plus P&P

1:10 RC Land Cruiser 40 Black (CC-01)

Article number: 300058564 Product: 1:10 RC Land Cruiser 40 Black (CC-01) The Toyota Land Cruiser 40 was a world-renowned 4WD vehicle that was produced for nearly 25 years. It now makes a re-appearance in the Tamiya catalog with a new "street-customized" color scheme and mounted on the tough CC-01 chassis. About the Model • This is a 1/10 scale R/C construction kit. • Model length: 426mm, Wheelbase: 252mm • The shaft driven 4WD CC-01 chassis features ladder frame bathtub type frame, front double wishbone suspension, and 4-link rigid rear suspension. • The boxy form of the car is reproduced in a durable yet lightweight polycarbonate body. • Metal parts are used to recreate the unique oval radiator grille, turn signals and front bumper. • Narrow 26mm metal-plated wheels are encased in large-diameter tires. • LED lights are included to depict realistic head (white) and tail (red) lights.   Warning! Not suitable for children under 14 years.
€319.99
incl. VAT plus P&P

1:10 RC Mercedes Benz Unimog U425(CC-01)

Article number: 300058609 Product: 1/10 RC Mercedes Benz Unimog 425(CC-01) The Tamiya CC-01 (Cross Country) chassis is a favorite vehicle amongst R/C enthusiasts. It’s easy to assemble and offers realistic cross country running. The list of body styles available has grown with the addition of the Unimog 425. The Unimog, of course, is a multi-purpose truck with unrivalled off-road performance and its name is an acronym which stands for the German description "UNIversal-MOtor-Gerat." The 425 variant was a heavier model that was produced in the 1970s and 1980s. It featured a 120hp engine and 2.81m wheelbase. The Tamiya R/C replica faithfully captures all of the full size Unimog details down to the large snorkel and cap vent and large side view mirrors. The Unimog body is mounted on the capable CC-01 Cross Country chassis, which features independent front suspension and a rear 4-link rigid suspension set up for fun scale trail running enjoyment. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.
€254.99
incl. VAT plus P&P

1:10 RC Neo Fighter Buggy DT-03

Article number: 300058587 Product: 1:10 RC Neo Fighter Buggy DT-03 The Neo Fighter Buggy is mounted on the easy to build DT-03 chassis platform. Intended as an easy-to-get-started model to encourage young drivers to enter the world of R/C, its intuitive yet tough design allows hassle-free assembly and gives less experienced users the opportunity to get to grips with R/C model composition and construction. DT-03 Chassis at a glance: The stylish slim-line form of this chassis stems from its lightweight yet durable monocoque frame, which features a longitudinally-positioned battery and the R/C equipment along the centerline for excellent balance. The combination of a long 287mm wheelbase and 4-wheel double wishbone suspension married to CVA oil dampers with long arms, allows the model to handle with stability on poor surfaces. Ribbed front and square spike rear tires provide ample grip, and the rear-positioned gearbox is sealed to protect from dust and dirt, with the built-in differential gear offering smooth cornering.   Warning! Not suitable for children under 14 years.
€89.99
incl. VAT plus P&P

1:10 RC Neo Scorcher (TT-02B)

Article number: 300058568 Product: 1:10 RC Neo Scorcher (TT-02B) The Scorcher, a popular and speedy 4WD racing buggy from the late-1980s Tamiya line-up, is back, with a new name and updated body! Made from durable polycarbonate and featuring a stylish large rear wing, the body design drew heavily upon the original Scorcher for inspiration, and can be decorated with the minimum of fuss, thanks to the large stickers included. It runs on the easy-assembly shaft-driven 4WD TT-02B, and marries the chassis' controllability with square spike tires for superior grip on rough surfaces. This off-road veteran is back with new features to scorch your rivals! The shaft-driven 4WD TT-02B buggy chassis uses a skid-shaped frame. Its suspension setup uses 4-wheel independent double wishbone suspension with long arms, plus CVA shock units, giving the car assured handling, while L/R suspension arms and uprights are identical to facilitate hassle-free assembly. F/R gearboxes include 4-bevel differentials for smooth operation, and are sealed to ensure that dust can't get inside. The top can be removed simply by loosening 4 screws, making maintenance a breeze. 4 different gear ratios can be applied with the use of 3 separately-sold types of pinion gears, allowing you to match the characteristics of your car setup to the conditions at any given time. Of course, this off-road chassis also includes receiver case and motor cover to protect them from dirt and debris thrown up off of the track.   Warning! Not suitable for children under 14 years.
€139.99
incl. VAT plus P&P

1:10 RC NISMO R34 GT-R Z-Tune (TT-02D)

Article number: 300058605 Product: 1/10 RC NISMO R34 GT-R Z-Tune (TT-02D) The R34 GT-R is given a new release on the new Tamiya standard for drift driving, the TT-02D chassis. The R34 was the 5th generation of the legendary Nissan GT-R series of cars; it debuted at the 2005 Tokyo Auto Salon. The Z-Tune version was an even more impressive beast; developed by Nissan's in-house motorsports/ performance division NISMO, it was built around a 500hp 2.8-liter powerplant that could reach 8,000rpm. It also featured SACHS adjustable suspension and brakes developed in conjunction with Brembo. NISMO also went to work on the body, with racing features such as vents and wider fenders than the original. The body color was the aptly-named Z-Tune Silver, applied specially for this car. With only 20 production cars made, getting your hands on one is a difficult task, but you can pilot it in R/C form with this model! About the Model • This is a 1/10 scale R/C model assembly kit. • The aggressive 2-door coupe form is captured faithfully by the polycarbonate body. • The TT-02D is the specially tuned drift spec of the popular shaft-driven 4WD entry chassis, the TT-02. • Features 24mm width drift-spec tires, CVA oil dampers, full ball bearings, a sport-tuned motor and aluminum motor heat sink. • The body was originally used on Item 58419. • Export version only includes LEDs to recreate lights on the car.   Warning! Not suitable for children under 14 years.
€219.99
incl. VAT plus P&P

1:10 RC Nissan Skyline GT-R R33 (TT-02D)

Article number: 300058604 Product: 1/10 RC Nissan Skyline GT-R R33 (TT-02D) Tamiya is excited to announce this model on the new Tamiya standard for drift driving, the TT-02D chassis. The R33 was the fourth generation of the famous Nissan Skyline GT-R; the RB26DETT 2.6-liter inline-6 engine was a carryover from its R32 predecessor, and this time the twin turbo powerplant was fitted with a 16-bit engine control unit. The vehicle was 13cm longer than the R32, with a wheelbase extended by 10.5cm. The body was also widened and strengthened, and given an adjustable rear spoiler. Other features on this high-powered car included ATTESA E-TS 4-wheel drive system and Brembo brakes. About the Model • This is a 1/10 scale R/C model assembly kit. • The distinctive, powerful body of the R33 is recreated in durable polycarbonate. • The TT-02D is the specially tuned drift spec of the popular shaft-driven 4WD entry chassis, the TT-02. • Features CVA oil dampers, full ball bearings, a Sport-Tuned motor and aluminum motor heat sink. • Stickers and masking stickers are included in the kit. • Mesh-type wheels are paired with super driftech tires.   Warning! Not suitable for children under 14 years.
€179.99
incl. VAT plus P&P

1:10 RC Porsche 911 Carrera RSR (TT-02)

Article number: 300058571 Product: 1:10 RC Porsche 911 Carrera RSR (TT-02) The Porsche 911 Carrera RSR joins the rapidly-expanding TT-02 chassis line-up. It is a legendary Group 4 car which had a body weighing just 900kg with a 300hp-plus horizontally opposed 6-cylinder engine, and still holds a place in fans’ hearts today thanks to its exploits with racing teams the world over. In 1973, the year of its release, it won the European GT Championship, plus the renowned 24 Hours of Daytona and 12 Hours of Sebring races. The works prototype in predominantly silver livery with the Martini stripe also took the checkered flag in the famed Targa Florio race. About the Model • This is a 1/10 scale R/C assembly kit. • The model’s polycarbonate body accurately recreates that of the real car. Rear wing is integrated with body. • Separate parts are included to depict side mirror. • The shaft driven 4WD TT-02 is a highly versatile and easy-to-maintain chassis. • A wide range of option parts are becoming available to tune and customize TT-02 chassis machines. • The kit includes decorative and masking stickers. • EXPORT VERSION ONLY includes RS-540 Torque-Tuned Motor.   Warning! Not suitable for children under 14 years.
€159.99
incl. VAT plus P&P

1:10 RC RAYBRIG NSX Concept-GT (TT-02)

Article number: 300058599 Product: 1/10 RC RAYBRIG NSX Concept-GT (TT-02) The Raybrig NSX Concept-GT is also released on the reliable shaft-driven 4WD of the TT-02 Chassis. The racing car was developed to race in the 2014 Japanese Super GT Series, and features a 1.6-liter turbocharged direct injection engine with anti-lag, plus a midship layout that optimizes distribution of car's weight, particularly taking into account its unique hybrid system. About the Model • This is a 1/10 scale R/C model assembly kit. Wheelbase: 257mm. • The durable polycarbonate body accurately captures the low nose and complex make up of the front and rear ends. • The TT-02 is a highly versatile and easy-to-maintain chassis. • Separate parts are included to recreate dynamic rear wing and unique door mirrors. • Comes with black 10-spoke wheels. • Includes body markings and masking stickers for use when painting the model. • A wide range of option parts is available to tune and customize TT-02 Chassis cars. • Please note that R/C equipment and battery pack are separately required.   Warning! Not suitable for children under 14 years.
€154.99
incl. VAT plus P&P

1:10 RC Subaru BRZ R&D Sport 2014 TT-02

Article number: 300058607 Product: 1:10 RC Subaru BRZ R&D Sport 2014 TT-02 The latest model to appear in the expanding TT-02 chassis line-up is this version of the R&D Sport-run Subaru BRZ, a car entered in the GT300 class of the Japanese Super GT series. While the car retains the general atmosphere of the road-going BRZ, it has been significantly modified for the racing series, with a racy wide and low form. Subaru’s motorsports arm STI tuned the 2-liter 4-cylinder boxer, which has an output of 350ps and impressive torque of 45kgf·m. The car enjoyed positive progress in the 2014 season with a number of promising qualifying performances leading to improved results later in the year. This model recreates the car as it appeared in Round 2 of the season in Fuji. Tamiya has faithfully reproduced this sleek racing machine in 1/10 scale on the TT-02 entry level touring car chassis. The TT-02 chassis platform is the successor to the TT-01 as it incorporates many new features to make it even easier for the new R/C kit builder to assemble and learn from. The TT-02 chassis performs well as cornering and overall speed has been enhanced to take advantage of new electronics available on the market. In addition to the TT-02 being an ideal platform to start from, R/C hobbyists can expand its potential by adding many of the Ho-Up-Options available to increase the cars speed and performance. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.
€144.99
incl. VAT plus P&P

1:10 RC Super Clod Buster 2012

Article number: 300058518 Product: 1:10 RC Super Clod Buster 2012 The Super Clod Buster is back! This monster truck features a body that was inspired by classic pick-up trucks from the 1980"s, giving it a realistic appearance. The front grille, air intake and roll bar are recreated with metal-plated parts. The truck also features a twin-motor dual gearbox 4WD drivetrain, 8 coil spring dampers and massive 165mm diameter tires, as well as a 4-wheel drive steering system to help the model navigate tight corners.
€319.99
incl. VAT plus P&P

1:10 RC Toyota 4x4 Pick Up Bruiser 2012

Article number: 300058519 Product: 1:10 RC Toyota 4x4 Pick Up Bruiser 2012 This electric R/C assembly kit reproduces the 4WD Toyota Hilux Pick-Up (RN36), which enjoyed wide popularity in the US and Japan during the 1980s and is still adored by many fans today. The model features a ladder frame like the actual vehicle, Type 540 motor, 3-speed transmission, and an abundance of metal parts for a high level of realism. Its live axle suspension features metal axle housings, leaf springs, and oil dampers while a metal front under guard helps the model take on tough off-road conditions. A highly detailed injection-molded body and large 123mm diameter tires also gives the model a stylish, high-lift appearance. About the Toyota Hilux Pick-Up  The 3rd generation Toyota Hilux Pick-up (30/40 Series) debuted in 1978 and the RN36 model was developed specifically for export markets. It featured a sporty, lightweight body and was powered by a 98hp 1,968cc 4-cylinder gasoline engine. Furthermore, its live axle suspension featured front leaf spring shackles located towards the rear to provide sufficient approach/departure angles for superb off-road performance. Front/rear flared fenders and large tires gave the truck a tall, aggressive stance. The RN36 model was mainly exported to North America but was also later sold in Japan, and there are still many fans of this pick-up to this day. Necessary accessories: - 4-channel R/C unit with ESC  - Battery Pack & Charger - Batteries for transmitter   Warning! Not suitable for children under 14 years.
€729.99
incl. VAT plus P&P

1:10 RC Toyota HiLuxHighLift 4x4 3-Speed

Article number: 300058397 Product: 1/10 RC Toyota HiLuxHighLift 4x4 3-Speed Combining nostalgic feel with modern mechanics, the superbly detailed classic Toyota pick-up truck body is now mounted on the same chassis as the Ford F-350 High-Lift. Toyota Hilux High-Lift Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.
€499.99
incl. VAT plus P&P

1:10 RC Toyota Supra Drift Spec TT-02D

Article number: 300058613 Product: 1/10 R/C Toyota Supra (TT-02D) Drift Spec One of the most recognized Japanese sports cars around the world, the Supra has left its mark both on the race track in the hands of pro drivers and on the streets in the hands of enthusiasts. Now, the Tamiya model (original release: Item 58392) is given a new release on the new Tamiya drift unit, the TT-02D chassis. About the Model • This is a 1/10 scale R/C model assembly kit. • The aggressive form is captured faithfully by the polycarbonate body. • Features separately-molded side mirror and rear wing parts. • Includes carbon pattern decals for engine hood and rear wing. • The TT-02D is the specially tuned drift spec of the popular shaft-driven 4WD entry chassis, the TT-02. • Features 24mm width drift-spec tires on metal-plated mesh wheels, CVA oil dampers, full ball bearings, a sport-tuned motor and aluminum motor heat sink. • The body was originally used on Item 58392. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.
€179.99
incl. VAT plus P&P

1:10 RC Toyota Tundra HighLift 3-Speed

Article number: 300058415 Product: RC Toyota Tundra HighLift 3-Speed The Tundra is a full-size pick-up truck made by Toyota for the North American market. In 2007, the Tundra underwent a model change, and this is a 1/10 R/C assembly kit of the double cab version of this second generation Tundra. The model features a ladder frame chassis just like the actual truck, and is also equipped with a 3-speed transmission and shaft-driven 4WD system. Many metal parts such as the ladder frame, leaf springs, and friction dampers provide a unique assembly experience while the injection-molded body shell and large diameter tires accurately reproduce the high-lift's imposing appearance. Futhermore, parts such as a roll bar, grille guard, and roof carrier with 2 snowboards are included to let you customize your ride. Add separately available LED lights for an even higher level of realism. ● Length: 500mm, Width: 216mm, Height: 238mm, Weight: Approx. 3.1kg. ● Motor: Type RS540 ● Drivetrain: Shaft-driven 4WD ● Diff. Gear: Front/Rear 2-bevel Diff. ● Suspension: Fron/Rear Leaf Rigid ● Dampers: Front/Rear Friction Dampers ● Gear Ratios: 1:64.39 (Low), 1:35.20 (2nd), 1:21.14 (Top) ● Speed Controller: ESC   Warning! Not suitable for children under 14 years.
€499.99
incl. VAT plus P&P

1:10 RC TT-02D Drift Spec Chassis

Article number: 300058584 Product: 1:10 RC TT-02D Drift Spec Chassis The TT-02 chassis is Tamiya's latest entry level 4WD full independent suspension assembly kit that offers ease of assembly and easy maintenance. The TT-02D is the Drift Spec variant that includes special parts to make it a fun to drive drifting machine. Includes Super Driftech tires (24mm width) which feature a special resin compound suited to drift driving. Includes full ball bearings and CVA (oil-filled) Super Mini shocks. Tamiya Sport-Tuned Motor and Aluminum heat sink is included. Brake disc-shaped wheel hubs (silver color) and battery holder (blue) are metal-plated parts. The TT-02 chassis offers 2 different wheelbases and tread settings without the addition of Option Parts. It also supports 10 different gear ratios. The skid-shaped underside of the bathtub type frame minimizes contact with the road surface. Body is not included in this kit. Purchase a separately-sold body of your choosing and fit it to the chassis.   Warning! Not suitable for children under 14 years.
€139.99
incl. VAT plus P&P

1:10 RC Volkswagen Beetle (M-06)

Article number: 300058572 Product: 1:10 RC Volkswagen Beetle (M-06) The Volkswagen Beetle needs little introduction to most people around the world. A record 21 million Beetles were produced over a production period spanning 60-plus years, and the distinctive rounded form of the car is a familiar sight. It was the brainchild of the famed German designer Ferdinand Porsche, and saw military service during the Second World War. The R/C model of this car was released in 19xx on the M-04 chassis and it now comes out on the modern M-06 chassis. About the Item • This is a 1/10 scale R/C assembly kit. • The polycarbonate body captures the instantly-recognizable form of the car. Metal-plated parts for front/rear bumper and side mirrors included to enhance realism. • Metal-plated wheels also included. • The M-06 chassis features a Rear-Motor, Rear-Wheel Drive setup and offers nimble handling performance.   Warning! Not suitable for children under 14 years.
€169.99
incl. VAT plus P&P

1:10 RC VW Scirocco GT24 R-Line TT-01E

Article number: 300058508 Product: 1:10 RC VW Scirocco GT24 R-Line TT-01E Race-Spec Scirocco This is a 1/10 scale R/C assembly kit of the Volkswagen Scirocco GT24-CNG, which demonstrated its superb performance by capturing the AT (alternative powertrain) class title at the 2011 24 Hours Nürburgring. The sporty form of the race-spec Scirocco has been realistically reproduced by the polycarbonate body, with the rear wing and side mirrors depicted with separate parts for enhanced realism. The car numbers and sponsor logos can be depicted with the included stickers. Evolved Chassis The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance. Mounted on the bathtub frame are a fiberglass reinforced nylon upper deck and gear covers which improve rigidity, as well as a 3-piece tie rod to provide smooth steering action. The low center of gravity, great balanced design, 4-wheel double wishbone suspension system, and front and rear differential gears all come together to result in superb driving characteristics. Slick tires are mounted on gun metal 10-spoke wheels. Separately Required Items ●2-Channel R/C Unit with ESC  ●Batteries for transmitter ●Battery Pack & Charg   Warning! Not suitable for children under 14 years.
€144.99
incl. VAT plus P&P

1:10 RC XV-01 Lancia Delta HF Integrale

Article number: 300058569 Product: 1:10 RC XV-01 Lancia Delta HF Integrale The Lancia Delta Integrale, which has made a number of appearances on various chassis over the years, now comes on the XV-01 chassis. Rally fans are sure to have fond memories of this legendary rally warrior, which won 6 titles back-to-back at the end of the 1980s and start of the 1990s. About the Model • This is a 1/10 scale R/C assembly kit. • The body is recreated faithfully in polycarbonate. • The XV-01 chassis features front-motor belt-driven 4WD. • Metal-plated side mirrors and grille come as separate parts. • The car is appropriately fitted with Rally Block tires, on white wheels. • Type 540 Motor included.   Warning! Not suitable for children under 14 years.
€264.99
incl. VAT plus P&P

1:12 Yamaha XV1600 Road Star 1999

Article number: 300014080 Product: 1:12 Yamaha XV1600 Road Star 1999 About the Yamaha XV1600 Road Star Yamaha shocked the motorcycle world once again when it brought out the XV1600 Road Star, a unique combination of traditional cruiser design with state of the art technology. The construction of the machine is focused on providing the maximum amount of comfort, performance and style to today's large capacity cruiser customer. The XV1600 is powered by a huge 1,600cc air-cooled V-twin pushrod engine housed in an ultra-long and low chassis. This OHV engine pumps out 46.3kW (62.6PS) at 4,000rpm and features an electric starter. The front suspension of this machine consists of telescopic forks, while the rear consists of a swinging arm monocross. This gorgeous motorcycle was voted "1999 Cruiser Bike of the Year" by Cruising Rider Magazine. About the model - Tamiya has recreated the Road Star in stunning detail as their latest addition to the 1/12 Motorcycle Series. - Overall length: 208mm, overall width 89mm, overall height: 100mm. - Enjoy the fascinating assembly incorporating real screws and two kinds of metal plated parts. The delicate fins of the air-cooled engine, spoke wheels and the slender brake and clutch lines all add to the realism of this motorcycle masterpiece. - Kit comes with two kinds of tank emblems (one for the Japanese and American "Road Star" and one for the "Wild Star" as it is called in Europe. - Various decals for stripes and meters are also included in this authentic kit. - Transparent display stand also included.
€41.49
incl. VAT plus P&P

1:12 Ducati 1199 Panigale S

Article number: 300014129 Product: 1/12 Ducati 1199 Panigale S Tamiya has expanded its 1/12 scale motorcycle model series with this all new model of the Ducati 1199 Panigale S. The Ducati 1199 Panigale, which was the base for the bike depicted by this model, was announced at the 2011 Milan Motor Show. It is a breathtaking fusion of beautiful looks and cutting-edge technology, featuring a newly-designed engine, monocoque frame with air box and much more. The 1199 Panigale S features upgrades to its suspension, wheels, lights and other parts for an enhanced riding experience.   Warning! Not suitable for children under 14 years.
€50.99
incl. VAT plus P&P

1:12 Ducati 916 Desmo. 1993

Article number: 300014068 Product: 1:12 Ducati 916 Desmo. 1993 About the Ducati 916 Ducati, the renowned Italian motorcycle manufacturer, is highly regarded by motorcycle enthusiasts the world over. Their current top-of-the-line "916" bike was unveiled to the public during the 1993 Milan Motor Show. In recent years, Ducati has been a dominant force at the World Superbike Championships. Their 916 was developed using the latest racing technology and expertise, and became a very effective base machine fore these Championships. Its 114 horsepower, 916cc, liquid cooled L-twin cylinder engine uses a computer controlled fuel injection system and Ducat's traditional Desmodromic valve operation system. This valve system uses cam mechanics for both opening and closing the valves, while a conventional system closes the valves with springs only. This powerful engine is mounted in a light weight and extremely rigid, chrome molybdenum steel tubular frame. The rear swing arm suspension uses a mono-arm for quick tire changing during competition. Showa's shock absorbers and Brembo brake calipers are used at both ends. The 916 has a 2-stage adjustable caster offset system. Its aerodynamic cowl design is very distinctive, differing from other racer-replica bikes. The front cowl has engine air intake openings and mounts the dual headlamps. The fuel tank is ergonomically sculptured to fit the rider's varying posture during hard riding. The 916 is a true street legal racing machine on the leading edge of performance and styling.  
€33.99
incl. VAT plus P&P

1:12 Ducati Desmosedici #65 MotoGP´03

Article number: 300014101 Product: 1:12 Ducati Desmosedici #65 MotoGP´03 About the Model Detailed 1/12 assembly model kit of the 2004 Ducati Desmosedici ★Model accurately depicts trademark Ducati style, such as truss-frame and V4 engine with rear suspension swing arm directly attached to crank case. ★Accelerator, clutch and brake wiring masterfully depicted with plastic tubing. ★Synthetic rubber tires look and feel like authentic racing slick tires ★Side and seat cowling can be removed after assembly allowing full display of engine ★Due to sponsor's request, white marking decals are not included with this kit.
€48.99
incl. VAT plus P&P

1:12 Kawasaki Ninja ZX-12R Street 1999

About the Kawasaki Ninja ZX-12R Kawasaki's legacy of cutting-edge sportbikes has inspired motorcycle fans for generations. Recently, the call for 300km/h plus super sports bikes has motivated several manufactures to bring out powerful contenders. Kawasaki answered the call at the 1999 Paris Motorcycle Show, with the impressive debut of their all-new Ninja ZX-12R. This Ninja was reportedly created in the image of a fighter plane, which comes as no surprise considering that its slippery aerodynamics involved the cooperation of the Aerospace Division of Kawasaki Heavy Industries, Ltd. In fact, the ZX-12R spent more time in the wind tunnel during its development phase than any motorcycle in Kawasaki's history. The results are evident: small winglets on the sides of the fairing separate airflow around the bike; small wind deflectors on the lower forks deflect turbulent air from the engine; a long lip on the edge of the fairing further smoothens out airflow. Also, projecting just ahead of the front fairing, a large scoop takes advantage of higher air pressure, heightening intake efficiency. A monocoque frame backbone creates an airbox that allows air to pass through the inside of the bike for cooling in addition to ensuring overall rigidity. The powerplant of the Ninja ZX-12R is a fuel injected 4-cylinder 1,199cc engine that pumps out an abundant 178hp. Its four-into-two-into-one exhaust system features a titanium muffler paired with a catalyzer, which helps eliminate unburned hydrocarbons for cleaner emissions. Kawasaki brilliantly raised the superbike standard in performance, power and aerodynamics with their series flagship, the Ninja ZX-12R.
€41.49
incl. VAT plus P&P

1:12 Kawasaki Ninja ZX-RR #55 2006

Article number: 300014109 Product: 1/12 Kawasaki Ninja ZX-RR #55 2006 The Ninja ZX-RR was Kawasaki's first MotoGP machine equipped with a 4-stroke engine, and after overcoming initial teething problems, began to show its potential. With the addition of rider Shinya Nakano in 2004, the team kept improving and became capable of challenging the top teams for race honors. Nakano rode the lime-green, 990cc-engined machine to a second place podium finish at Round 8 in the Netherlands for his best finish of the 2006 MotoGP season. Features: Cowlings can be attached/detached using precison-made screws to showcase accurately reproduced internal details. Rear suspension feature realistic nut fastener. Wrench tool is conveniently included to aid assembly. Brilliant livery can be recreated using Tamiya paints (Light Green & Semi Gloss Black), with sponsor logos provided by beautiful Cartograf decals. Synthetic rubber racing slick tires with Bridgestone markings provide an authentic race feel. Markings for both Shinya Nakano's No.56 and Randy de Puniet's No.17 included   Warning! Not suitable for children under 14 years.
€53.99
incl. VAT plus P&P

1:12 Kawasaki ZZR 1400 Ninja/ZX-14 Stre.

Article number: 300014111 Product: 1:12 Kawasaki ZZR 1400 Ninja/ZX-14 Stre. When Kawasaki announced the ZZR1400 it continued their tradition of producing the strongest bike in the hyper sport category. It attracted much attention due to its impressive design and specifications. The ZZR1400 had such a great road presence and strong character, that it exceeded expected sales forecasts. In America it was given the official name "ZX-14" but is more widely recognized by its nickname "Ninja". The ZX-14 is currently known as the world's most powerful sports motorcycle. The motorcycle also featured a tandem seat fairing and an under diffuser. In addition to the standard coloring, a fire pattern livery was given to the American market for special use.   Warning! Not suitable for children under 14 years.
€53.99
incl. VAT plus P&P

1:12 Panigale 1199 S Frt. Fork

Article number: 300012657 Product: 1/12 Panigale 1199 S Frt. Fork Add an even deeper layer of realism to your 1/12 scale model of the Ducati 1199 Panigale S using this detail up parts set depicting the bike's font fork! Metal and plastic parts are included to replace kit standard parts and they provide an ultra-realistic finish to the model. Specifications: • The set provides ten separate types of parts including inner and outer tubes, plus parts depicting smaller pieces of the fork such as connectors and end caps. • Aluminum outer tubes feature a gold anodized finish and are combined with other aluminum, brass and plastic parts to not only provide a highly realistic appearance, but also give the model an authentic feel.
€27.99
incl. VAT plus P&P

1:12 Suzuki GSX1100 Katana Cust.Tuned

Article number: 300014065 Product: 1:12 Suzuki GSX1100 Katana Cust.Tuned Making its sensational debut at the 1980 Cologne Motor Show, the Suzuki GSX1100S Katana came with special parts and a customized finish which has been accurately portrayed by this plastic assembly model kit. ★The air-cooled 4-cylinder DOHC engine and its cooling fins have a precisely reproduced finish. ★Engine parts including the front mounted oil cooler and the Katana's exhaust are included in the set and provide the model with greater realism. ★Custom parts including the front and rear brakes, large diameter front rotor with 4-pod calipers, and small diameter rear floating calipers are realistically reproduced to help capture the ever lasting presence of the Katana.
€24.49
incl. VAT plus P&P

1:12 Yamaha YZF-R1 1000ccm 1997 Street

Article number: 300014073 Product: 1:12 Yamaha YZF-R1 1000ccm 1997 Street At the Motorcycle Show held in Milan, Italy, in September of 1997, the Yamaha YZF-R1 supersport motorcycle made its debut. Sporting a powerful 1000cc engine, it has the compact construction of a 400cc bike. The YZF-R1 was developed for maximum possible cornering ability in a production motorcycle. With a 1000cc water-cooled, four stroke, 4-cylinder, 5-valve engine and adopting a redesigned EXUP exhaust system, it pumps out 150hp of high-intensity power. Subtle throttle control makes both superb acceleration response and rhythmic cornering a reality. The Deltabox II aluminum frame was sought after not only for its rigidity, but more so for its moderate flexibility during tight cornering. With the addition of a long span aluminum swing arm, high control ability has been achieved. By adopting an upside-down front fork, stroke distance has been increased and traction heightened. Boasting a sharp form with multi-reflector lights, the YZF-R1 has been given an unprecedented style. From the contact points between the rider and motorcycle, right down to the material used in the seat and tank, the YZF-R1 has been thoroughly studied. Of course, the abundance of high precision and high quality parts goes without saying. Designed to cruise at high speeds on winding roads, the YZF-R1 shatters expectations about large exhaust engine motorcycles. Yamaha has expanded the possibilities of a 1000cc bike.
€31.49
incl. VAT plus P&P

1:14 Multi-function Control Unit MFC-01

Article number: 300056511 Product: 1/14 Multi-function Control Unit MFC-01 About the Tractor Truck Multi-Function Control Unit Tamiya presents incredible sound and action options for any 1/14 scale R/C Tractor Truck with the all R/C Tractor Truck Multi-Function Control Unit. This system, when mounted on the truck is located inside the cabin with speaker to the front and the MFC-01 unit to the rear. The control unit is mounted inside the left tool box for easy access.
€359.99
incl. VAT plus P&P

1:14 Multi-function Unit MFC-03

Article number: 300056523 Product: 1/14 Multi-function Unit MFC-03 The popular Multi-Function Control (MFC) unit for R/C tractor trucks, which adds a whole extra layer of realism to driving, receives an update. This unit allows transmitter trim levers to be combined with stick control use, meaning you can enjoy lights, sounds and vibrations coordinated with actions while driving your R/C tractor truck model. This version of the MFC features engine sounds which were recorded from a real European truck's L6 diesel engine for amazing realism. About the MFC-03 • Features 33 different types of sound, including engine ignition and shutdown, horn, gear changes, brakes, air sound effects and so on. A 60mm-diameter full-range speaker in a resin case provides excellent quality. • Up to 21 actions can be controlled using a 4-channel transmitter. • Light operation and volume adjustment are also possible using the transmitter. • Includes white, red and yellow high brightness LEDs to duplicate truck HID lights with precision. • An ESC has been built in to the unit, enabling realistic running at very low speeds. • The MFC unit can be run in three modes: R/C mode with Multi-Function (lights and sounds) off; Multi mode, with R/C and multi-function on; Demo mode, which allows display of lights and sounds only. • Can be used for support leg operation when employing Item 56505 Motorized Support Legs. • Cannot be used together with Item 53909 TLU-01 or Item 53937 TLU-02. • Requires separately sold 4ch transmitter with slide trims, 4ch receiver and 2 servos (3 if using Item 56505) .
€399.99
incl. VAT plus P&P

1:14 NYK 40ft Container Semi-Trailer

Article number: 300056330 Product: 1/14 NYK 40ft Container Semi-Trailer Nippon Yusen Kaisya (NYK) is one of the largest shipping companies in the world. This is the Tamiya replica in 1/14 scale and it is the second container model released in the Tractor Trailer R/C category. The container features an aluminum frame with durable ABS front, top, and side panels. The well-known NYK logos are reproduced on the included vinyl sticker sheet, and the container can be detached from the semi-trailer after assembly. The 3-axle semi-trailer chassis comes with a realistically reproduced leaf-spring suspension. This semi-trailer can be connected to any Tamiya 1/14 R/C Tractor Truck and a variety of Option Parts can also be installed for enhanced realism.   Warning! Not suitable for children under 14 years.
€529.99
incl. VAT plus P&P

1:14 RC 3-Axle-ReeferSemi Trailer Kit

Article number: 300056319 Product: 1/14 RC 3-Axle-ReeferSemi Trailer Kit Owners of Tamiya's 1/14 R/C trucks have been calling for a 3-axled trailer to better recreate the load outs of trucks in their respective countries. We are now proud to present this brand new 3-axle Reefer (Refrigerated) Semi-Trailer to further distinguish our unique lineup of R/C truck products. Technical data: Scale 1/14 Height 310 mm   Warning! Not suitable for children under 14 years.
€469.99
incl. VAT plus P&P

1:14 RC 40ft.Container Semi-Trail.Maersk

Article number: 300056326 Product: 1/14 RC 40ft.Container Semi-Trailer Maersk Cargo containers are used for shipping products and raw materials all around the world and ISO. This is a replica of a 40ft. regular height container which can be connected to any Tamiya's 1/14 scale Tractor Trucks.     Warning! Not suitable for children under 14 years.
€489.99
incl. VAT plus P&P

1:14 RC EU Truck Scania R470 Highlin Kit

Article number: 300056318 Product: 1/14 RC EU Truck Scania R470 Highline Kit It has been a long time in coming, but Tamiya has heard the demand from fans around the world and is now proud to present award-winning truck maker Scania's state-of-the-art R470 Highline as the newest addition to our unique 1/14 scale R/C tractor truck series. Swedish manufacturer Scania has a long history of producing exceptional trucks designed for long-haul transport. The company's R-series made its debut in 2004 and quickly built a highly favorable reputation that led to it being given the prestigious International Truck of the Year award in 2005. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.
€369.99
incl. VAT plus P&P

1:14 RC EUTruck ScaniaR620 6x4 Highl Kit

Article number: 300056323 Product: 1/14 RC EUTruck ScaniaR620 6x4 Highline Kit Trucks are essential components of Article number: 300056323 Product: 1/14 RC EUTruck ScaniaR620 6x4 Highline Kitmany logistics networks around the world. One such truck which can be seen on the roads carrying large loads is the biggest and most powerful Scania truck, the R620. Tamiya is proud to add this wonderful piece of machinery the R620 6x4 to the 1/14 scale R/C Tractor Truck lineup. This massive tractor truck features 3-axle and is approximately 458mm long. Beautifully reproduced cabin tilts forward separately from the fenders, just like the actual truck. The accurately modeled fenders themselves are removable for realistically depicting a low carrying load. Realistic chassis and suspension further add to the imposing form of this unique model. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.
€454.99
incl. VAT plus P&P

1:14 RC Flatbed-Semi Trailer Kit

Article number: 300056306 Product: 1:14 RC Flatbed-Semi Trailer Kit This highly realistic 1/14 scale flatbead semi-trailer model is for use in combination with Tamiya's 1/14 R/C tractor truck. A scale appearance is achieved by using authentic components such as aluminum chassis/frame, wood-floored platform and actual chains. Flatbed Semi-Traile   Warning! Not suitable for children under 14 years.
€249.99
incl. VAT plus P&P

1:14 RC Freightliner Cascadia Evolution

Article number: 300056340 Product: 1/14 RC Freightliner Cascadia Evolution The Cascadia Evolution is an aerodynamically advanced and more fuel efficient version of the Cascadia tractor manufactured by Freightliner Trucks, a leading manufacture in the North American market. This R/C model assembly kit of the Cascadia Evolution faithfully recreates the truck's fuel efficient form and includes a number of metal chassis parts. The highly aerodynamic form of the Cascadia Evolution was accurately captured thanks to extensive research and cooperation from Freightliner/Daimler. The model also features accurate interior details such as dashboard and seats. Gloss and matte finished metal-plated parts further heighten the model's realism.   Warning! Not suitable for children under 14 years.
€469.99
incl. VAT plus P&P

1:14 RC Ger. Truck Merc.Benz 1838 LS Kit

Article number: 300056305 Product: 1/14 RC Ger. Truck Merc.Benz 1838 LS Kit The 1838LS tractor truck combines a massive aerodynamic silhouette with a powerful 380 horsepower, 12,763cc V8 cylinder turbo diesel engine. Tamiya's R/C model of the 1838LS truck realistically captures the looks of the full size truck.   Warning! Not suitable for children under 14 years.
€359.99
incl. VAT plus P&P

1:14 RC Ger. Truck MercBenz 1850L ON Kit

Mercedes-Benz 1850L   Warning! Not suitable for children under 14 years.
€429.99
incl. VAT plus P&P

1:14 RC Grand Hauler Customized

Article number: 300056344 Product: 1/14 R/C Grand Hauler Meet the latest addition to the 1/14 scale Tractor Trucks series! This model is based upon that Tamiya classic, the King Hauler (Item 56301). The King Hauler body is given an overhaul with numerous newly-designed parts inspired by the modern day trend of tractor truck customization. A number of metal and metal-plated resin parts further add to the mood of the model. Its longer frame gives the model proportions reminiscent of show trucks. About the Model • This is a 1/14 scale R/C model assembly kit. Length: 692mm, width: 190mm, height: 300mm. • The realistic, lengthened body features newly-designed parts depicting front and rear bumpers, front grille, air cleaners and muffler covers. Muffler covers are made from metal tubing. • Features a tough ladder frame construction with aluminum side channels and resin cross members. Realistic drivetrain setup sees the front mounted motor powering twin rear axles. • 3-speed transmission can be controlled via 4ch R/C transmitter. • Metal leaf spring dampers with built-in coil springs provide durable suspension. • Newly-designed 1/14 scale driver figure included. • Coupler is included to enable connection with any currently available Tamiya 1/14 scale trailer. • Compatible with the tractor truck option parts (TROP) Items 56511, 56512, 56513, 56515, 56524, 56526 and 56530. Pair with Multi-Function Control Unit MFC-01 (Item 56511) and MFC-03 (Item 56523) for super-realistic LED lights and sounds.   Warning! Not suitable for children under 14 years.
€449.99
incl. VAT plus P&P

1:14 RC LKW MAN TGX 26.540 XLX 6x4 3Axle

Article number: 300056325 Product: 1:14 RC LKW MAN TGX 26.540 XLX 6x4 3Axle The latest addition to Tamiya"s 1/14 scale R/C Tractor Truck series is the MAN TGX 26.540 6x4 XLX. This impressive truck, which made its debut at the 2007 European Transport Road Show in Amsterdam, was the winner of the 2008 Truck of the Year award. It features two rear axles which assist in the carrying of heavy loads over long distances. It is powered by an in-line 6 cylinder 12.4 liter turbocharged diesel engine which meets the stringent Euro 5 emissions standards to make it more environmentally friendly.   Warning! Not suitable for children under 14 years.
€469.99
incl. VAT plus P&P

1:14 RC MAN TGX 18.540 XLX 4x2 2Axle

Article number: 300056329 Product: 1:14 RC MAN TGX 18.540 XLX 4x2 2Axle ★1/14 scale R/C assembly model kit of the MAN TGX 18.540 4x2 XLX, a member of MAN's International Truck of the Year 2008-winning TGX series lineup. ★The model features a highly-detailed body and a 2-axle chassis with durable ladder frame. ★When controlled with a separately available R/C system, the 3-speed transmission enables authentic gear changes while driving.   Warning! Not suitable for children under 14 years.
€359.99
incl. VAT plus P&P

1:14 RC Mer.Benz Actros 2 Giga, black

Article number: 300056342 Product: 1/14 R/C Mercedes-Benz Actros 1851 GigaSpace (Black Edition) This is a special Black Edition kit of the Mercedes-Benz Actros 1851 GigaSpace (Item 56335) The body, F, K, M and H parts of the kit come pre-painted in Metallic Black for a cool look, and with a durable coating applied at the factory to protect the paintwork from damage. About the Item • This is a 1/14 scale assembly kit of the Mercedes-Benz Actros 1851 Gigaspace. • Length: 458mm, Width: 195mm, Height: 305mm. • Body, F, K, M and H parts are replaced with pre-painted Metallic Black parts. • Highly-realistic suspension recreated with metal leaf springs and friction dampers. • Separately available LEDs can be used to accurately recreate the truck’s front and rear lights. • Enjoys superb driveability thanks to its float-mounted die-cast front axle and reinforced resin rear axle. • The powerful form of the truck and its splendid interior are faithfully captured. • Installation of Item 56523 Multi-Function Control Unit "Euro-Style" MFC-03 (separately available) allows authentic recreation of sounds, lights, and vibration. • A wide variety of Tractor Truck Option Parts are available for you to further customize your machine, plus 1/14 Tractor Truck semi-trailers.   Warning! Not suitable for children under 14 years.
€469.99
incl. VAT plus P&P

1:14 RC Mercedes B. Actros1851 GigaSpace

Article number: 300056335 Product: 1/14 RC Mercedes Benz Actros 1851 GigaSpace The 2012 Truck of the Year award-winning Actros series is the flagship of the worlds leading truck manufacturer, Daimler. Its latest installment, the rear-wheel drive Actros 1851 GigaSpace runs on a 12.8-liter 6-cylinder turbo-charged engine generating 510hp and is used for long-distance haulage, heavy duty distribution haulage, construction haulage and so on. The Tamiya 1/14 scale R/C kit faithfully captures all the detail of the full size rig using ABS plastic for the body parts and a 3-speed, shift on the fly working transmission.     Warning! Not suitable for children under 14 years.
€439.99
incl. VAT plus P&P

1:14 RC Pole-Trailer Kit w/Tubes

Article number: 300056310 Product: 1/14 RC Pole-Trailer Kit w/Tubes The Pole-Trailer is able to carry pipes of various lenghts due to its collapsible pole. The trailer also features an aluminum chassis and 4 highly detailed wheels. 5 plastic pipes of 55mm in diameter and 75cm in length are included.     Warning! Not suitable for children under 14 years.
€269.99
incl. VAT plus P&P

1:14 RC Scania R620 6x4 High.blue paint.

Article number: 300056327 Product: 1/14 RC Scania R620 6x4 Highome blue painted This is a special edition kit of the 1/14 R/C Scania R620 6x4 Highline. The kit includes body components that are pre-painted in Tamiya Synthetic Lacquer TS-51 Racing Blue paint. The body is also clear coated with a urethane clear topcoat.     Warning! Not suitable for children under 14 years.
€469.99
incl. VAT plus P&P

1:14 RC Truck Ford Aeromax Kit

Article number: 300056309 Product: 1/14 RC Truck Ford Aeromax Kit The massive American rig has joined Tamiya's 1/14 scale tractor truck stable. Tamiya's model of the Ford Aeromax tractor truck boasts both large scale realism and authentic functions. Servo-shifted 3-speed transmission is mounted at the front of the aluminum ladder frame.     Warning! Not suitable for children under 14 years.
€414.99
incl. VAT plus P&P

1:14 RC US Fuel Tank Trailer 2Axle Galat

Article number: 300056333 Product: 1/14 US Fuel Tank Trailer 2Axle "Gallant Eagle" The Tamiya 1/14 scale Fuel Tank Trailer has been revamped! This fuel tank trailer features a newly-designed original and imagined livery that was inspired by fuel tank trailers seen in the United States. The chassis and tank parts are based on Item 56303.   Warning! Not suitable for children under 14 years.
€429.99
incl. VAT plus P&P

1:14 RC US Semi-Trailer Kit

Article number: 300056302 Product: 1/14 RC US Semi-Trailer Kit This Box Trailer can be hitched-up to a 1/14 scale R/C tractor truck. This trailer uses hard-anodized aluminum panels for the utmost durability and realism. Rear gate doors are open-able, just as seen on full-sized trailers. Semi-Trailer for T.Truck
€349.99
incl. VAT plus P&P

1:14 RC US Truck King Hauler Kit

Article number: 300056301 Product: 1/14 RC US Truck King Hauler Kit The Mighty King Hauler resembles the classic conventional American tractor truck. Powered by it's 540 motor driven with a 3-speed transmission, which has no problem turning the dual rear axles. Each axle is supported with leaf spring and shocks. The metal C-Channel ladder frame, keeps the power to the pavement. Whether by itself or coupled to an optional trailer, the King Hauler is sure to turn heads. RC Truck King Haule   Warning! Not suitable for children under 14 years.
€449.99
incl. VAT plus P&P

1:14 RC US Truck Knight Hauler Kit

Article number: 300056314 Product: 1/14 RC EU Truck Volvo FH12 Globetrotter 420 Kit The FH series was released in the fall of 1993 and became Volvo's primary truck. The following year, it was awarded the prestigious "Truck of the Year" title. It's huge 12-liter inter cooled turbo diesel engine is known as the "Euro 2", and is the result of state-of-the-art engineering technology.     Warning! Not suitable for children under 14 years.
€449.99
incl. VAT plus P&P

1:14 RC USTruck Globe Liner Cab Over Kit

Article number: 300056304 Product: 1/14 RC US Truck Globe Liner Cab Over BS Tamiya has captured the attractive appearance of tractor trucks in a 1/14 scale electric powered "Globe Liner". The rear double axle drive uses rigid propeller shafts for smooth performance. Globe Line
€449.99
incl. VAT plus P&P

1:14 Team Hahn MAN TGS (TT-01E)

Article number: 300058632 Product: 114 RC Racing Truck Team Hahn Racing (TT-01E) Weighing in at a colossal 5,400kg, the trucks in the European Truck Racing Championship are truly the heavyweights of motorsport. But size isn’t the only thing that’s extreme about these incredible machines. The Team Hahn Racing MAN TGS truck is powered by a huge 1,100hp turbocharged diesel engine. To get that phenomenal power from the engine to the tarmac is no easy task, which is why the truck takes advantage of a Mechanical 16-speed ZF gearbox to get it up to speed. In 2015, driver Joachim Hahn piloted the truck to a creditable 3rd position in the Championship. The Tamiya radio control replica faithfully captures the giant race truck. The polycarbonate body sits atop the TT-01 E chassis, which is designed for easy assembly and maintenance. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.
€164.99
incl. VAT plus P&P

1:16 Figure General Rommel Africa

Article number: 300036305 Product: 1:16 Figure General Rommel Africa This is a 1/16 scale plastic figure assembly kit depicting the "Desert Fox" - German WWII commander Feldmarschall Rommel. ★The figure is depicted in the uniform worn while Rommel was active in fighting in North Africa, with separate parts for collar and medals. ★Goggles are captured realistically using clear parts.   Warning! Not suitable for children under 14 years.
€17.99
incl. VAT plus P&P

1:16 Figure Ger. Infantry Man

Article number: 300036303 Product: 1:16 Figure Ger. Infantry Man This is a 1/16 scale plastic figure assembly kit depicting a WWII German infantryman in late-war camouflage. ★The infantryman is captured in action pose, aiming his MP40 with elongated stock. ★Separate parts are also included for various accessories such as ammo and gas mask cases, grenade, shovel and more.   Warning! Not suitable for children under 14 years.
€17.99
incl. VAT plus P&P

1:16 Figure US Infan.Man Desert Uniform

Article number: 300036308 Product: 1:16 Figure US Infan.Man Desert Uniform This is a 1/16 scale plastic figure assembly kit recreating a modern U.S. infantryman in desert uniform. ★The figure is depicted in body armor and vest, with M16A2 rifle cocked and ready to fire. ★A different parts configuration allows assembly with a lowered rifle. ★Camouflaged helmet is recreated with night vision goggles that feature clear parts, while other accessories lend a the model a really detailed air. Modern US Infantryman / Desert   Warning! Not suitable for children under 14 years.
€23.49
incl. VAT plus P&P

1:16 German Field Commander

Article number: 300036313 Product: 1/16 German Field Commande
€21.99
incl. VAT plus P&P

1:16 JGSDF Tank Figure Set

1:16 Figuren JGSDF Panzerbesatzung (2) This is a 1/16 scale figure set, which recreates servicemen from the Japan Ground Self Defense Force. The torso figure was originally included in Item 36209 Japan Ground Self Defense Force Type 10 Tank (Display Model), and is now joined by a full-body figure. This figure will prove very useful in the creation of dioramas with Tamiya's latest big scale tank model. Detailed Plastic Kit of model JGSDF Tank Figure Set in scale 1:16
€27.99
incl. VAT plus P&P

1:16 RC Panzer Leopard 2A6 Full Option

Article number: 300056020 Product: 1:16 RC Panzer Leopard 2A6 Full Option Widely recognized as the best modern day Main Battle Tank (MBT), Tamiya introduces the latest German Leopard 2 tank, the Leopard 2 A6, to the 1/16 scale R/C tank series. Tamiya's biggest R/C tank ever, it's just like driving the real thing! About the Leopard 2 A6 Used by more than 10 European nations, Germany's Leopard 2 tanks are a perfect balance of firepower, protection, mobility and availability. With the Leopard 2A5 regarded as the most powerful tank in the world with superior protection and fire power, the latest Leopard 2, the 2A6, features an even more powerful weapon system. The Leopard 2A5 featured replaceable wedge shaped armor on the turret, improved PERI-R 17 panoramic Commander's sight with thermal vision, spall liner on the turret interior for protection against splinters, all-electric gun control and stabilization system for easy maintenance and reduced noise, GPS navigation system, electro-pneumatic driver's hatch and a CCD camera mounted on the rear of tank for high-speed reversing. The Leopard 2A6 featured improved firepower including a 55 caliber 120mm smoothbore main gun utilizing kinetic energy LKE II ammunition for higher muzzle speed and lethality. The 2A6 has been employed by the German 403 tank battalion since March 2001, and is scheduled to replace all German 2A5 tanks by 2006. The use of the 2A6 continues to spread throughout Europe with the Netherlands, Spain and Greece adopting the 2A6 for their main battle tank. With continued improvements the 2A6 continues to set new standards as the world's best MBT. R/C Leopard 2 A6 w/Option Kit   Warning! Not suitable for children under 14 years.
€919.99
incl. VAT plus P&P

1:16 RC Panzer Tiger 1 Full Option

Article number: 30006010 Product: 1/16 RC Panzer Tiger 1 Full Option Tamiya has put incredible power and versatility of the German Tiger I in your fingertips with this 1/16 scale, fully functional R/C tank. Just some of the many functions this tank is capable of have been recorded in the video clips below. First check out the firing of the main cannon, complete with true to life flash and cannon recoil. The shot is so powerful that it actually causes the tank itself to recoil, just like the full size Tiger I. Then, click on the next image to see the cannon rotate, tracking down the enemy and preparing to fire. Next is the firing of the authentically recreated 7.92mm MG34 machine gun! Finally, take a gander at how the Tiger I moves on its durable resin and metal tracks. *1/16 scale Radio Controlled Assembly Model Kit (overall length: 530mm, overall width: 232mm) *A four-channel RC unit is necessary to operate this kit. Two 7.2V Tamiya Racing Packs (or equivalent) and charger are also required. Powerful Engine Sound Just about every sound the real Tiger I made can be made on Tamiya's 1/16 scale Tiger I. When the tank is switched on, either a manual crank start sound, or an automatic engine start sound is heard. After your engine is turned over, its time to move the tank around. As you accelerate, the engine thundering increases just like the real Tiger I. Stop the tank, and the sound of authentic idling begins. Once you have located your target, rotate the massive turret and listen to the grinding of gears of the real German war machine. The more you control this R/C tank, the more you will feel like the commander of the full size Tiger I ! The front-mounted gearbox contains two Type 380 motors that can operate together or individually to produce forward/reverse running and pivot turning. Metal torsion bars and suspension arms combine with the wide tracks to smoothly absorb bumps and dips in th R/C Tiger I Early w/Option Kit   Warning! Not suitable for children under 14 years.
€579.99
incl. VAT plus P&P

1:16 RC PanzerJagdpanther Full Option

Article number: 300056024 Product: 1/16 RC Panzer Jagdpanther Full Option The German Jagdpanther is widely regarded as one of the best, if not the best, tank destroyers of WWII, and Tamiya's 1/16 R/C assembly kit will enable fans to take command of this formidable AFV. With a total length of 605mm, this tank casts an imposing shadow and is fully-detailed as well. Housed in the sloped superstructure is the accurately reproduced L71 88mm gun, which can be moved and fired via a 4-channel transmitter. Realistic tank movement is made possible by the two gearboxes driving the caterpillar tracks, and both the gun barrel and tank react with lifelike recoil action when the main gun is fired. Furthermore, machine gun firing, main gun firing, and digitally-recorded engine sounds makes for a most exciting R/C tank experience. The front-mounted gearbox contains two Type 380 motors that can operate together or individually to produce forward/reverse running and pivot turning. Metal torsion bars and suspension arms combine with the wide tracks to smoothly absorb bumps and dips in the terrain and provide high maneuverability. In addition, realistic engine sounds accompany the tank as it starts up, drives, and stops to idle. Hull-mounted main gun can be elevated, depressed, and swung to the left and right. R/C Jagdpanther w/Option Kit   Warning! Not suitable for children under 14 years.
€779.99
incl. VAT plus P&P

1:16 RC US MBT M1A2 Abrams Full Option

Article number: 300056041 Product: 1:16 RC US MBT M1A2 Abrams Full Option The latest super-realistic model in the 1/16 scale R/C Big Tank Series recreates that modern day U.S. stalwart, the M1A2 Abrams. The Abrams has been around since the early 1980s, with constant upgrades to ensure that it stays at the cutting edge of military technology. M1A2s were introduced from 1992, developed to be chock full of front-line technology and bring the M1 into the digital age. They featured depleted uranium armor, a modified commander’s cupola and more, and saw action in the conflict in Iraq in 2003. About the Model • This is a 1/16 scale R/C model assembly kit. Length: 615mm, width: 231mm, height: 190mm. • Expertly recreated angular Abrams form includes depictions of anti-slip surface textures. • The chassis is powered by a gearbox with Type 540 motors and features metal parts such as lower hull, suspension arms, drive sprockets and more, for excellent durability. • Aluminum gun barrel has traverse and elevation/depression movement, thanks to a servo and Type 130 motor. • Multi-Function Unit is made up of turret and vehicle control units. It allows control of various movements via separately sold transmitter. These include turret rotation and gun elevation. It also ensures that a range of realistic sound and light effects (headlights, taillights, barrel flash) are paired with model actions. • Gun barrel control system can train the main gun in a single direction, which it remains pointed in even as the tank moves or climbs, and the turret rotates. • The included dual speaker offers highly realistic sounds. • Durable resin pre-assembled tracks feature metal pins and connectors. • Compatible with the Battle System (Item 53447) for fun and interactive battles with friends! • Requires a 4-channel transmitter with self-neutral function, battery pack and transmitter batteries.   Warning! Not suitable for children under 14 years.
€999.99
incl. VAT plus P&P

1:16 RC US Panzer M26 Pershing Full Opti

Article number: 300056016 Product: 1/16 RC US Panzer M26 Pershing Full Option Things just got realer. Starting with the 1/16 R/C sensation of the Tiger I Early Production, and then with the M4 Sherman 105mm Howitzer, Tamiya continues to develop its 1/16 R/C Tank Series. The third full-option kit to make its appearance is the U.S. Medium Tank M26 Pershing that fought during the end of WWII and throughout the Korean War. Tamiya keeps increasing its knowledge about R/C tanks and improving the realism of their movement and sound to make their appearance even more striking. Model Characteristics This is the 1/16 electric radio-control assembly kit of the U.S. Medium Tank M26 Pershing that made its appearance during the end of WWII. Overall length: 536mm, overall width: 218mm, overall height: 197mm. Despite its large scale, the model has been thoroughly and accurately reproduced. Not only can the model move forward and backward and turn with a great sense of power, but the turret can be rotated and the gun raised and lowered. Recoil of the gun and movement of the hull during shooting are also perfectly reproduced and synchronized. The sound of the engine has been recorded from a real Ford GAF Liquid cooled V8 engine, the metallic clanking sound of the tracks and the sound of the shooting of the main gun adapt to the model's movement. Moreover, this kit features headlights and brake lamps that light-up and main gun and front machine gun that flash. About the Engine Sound The sound of the engine was digitally recorded from a real Ford GAF liquid cooled V8 engine of the M26 Pershing at the Ropkey Armor Museum. All the variation of sound of the real engine but also all the metallic clanking of the track has been thoroughly recorded. The front-mounted gearbox contains two Type 380 motors that can operate together or individually to produce forward/reverse running and p R/C M26 Pershing w/Option Kit   Warning! Not suitable for children under 14 years.
€589.99
incl. VAT plus P&P

1:16 WWII Figure Ger. Machine Gunner GC

Article number: 300036306 Product: 1:16 WWII Figure Ger. Machine Gunner GC This is a plastic assembly kit model of a WWII German machine gunner wearing a greatcoat and shouldering a MG42 machine gun. The coat features separate parts to depict a wider collar and hems to provide the model with greater realism. Equipment such as the MG42 machine gun and gas mask case have a detailed finish.   Warning! Not suitable for children under 14 years.
€17.99
incl. VAT plus P&P

1:16 WWII Figure Ger.Infantry Man Winter

Article number: 300036304 Product: 1:16 WWII Figure Ger.Infantry Man Winter This is a 1/16 scale plastic figure assembly kit recreating a WWII German infantryman in reversible winter uniform. ★He is depicted in realistic pose with MP44 assault rifle in hand. ★Realistic facial expression and creases in clothing ensure a highly detailed finish. ★Depictions of ammo box, shovel, gas mask case and other accessories add a final accent to the model.   Warning! Not suitable for children under 14 years.
€17.99
incl. VAT plus P&P

1:16 WWII Figure Ger.Tank Crewm.Africa

Article number: 300036310 Product: 1:16 WWII Figure Ger.Tank Crewm.Africa Enjoy a Small Vignette In February 1941, German forces were sent to aid the Italian forces in North Africa, which were being pressed hard by the British. This force was led by Field Marshal Erwin Rommel and became known as the Africa Corps. Despite being outnumbered, Rommel led them to many victories over the British through superior tactics. This is a 1/16 scale figure of an Africa Corps tank crewman and it is approximately 113mm tall, enabling the modeler to fully appreciate the clothing details and realistic facial expression. A Relaxed Expression & Abundant Accessories 1/16 scale assembly model kit of a German Africa Corps tank crewman in tropical uniform. The jacket has four pockets, just like the M36 field uniform, and the open neck design is accurately reproduced. Decals are included to recreate the shoulder and lapel insignia as well as the armband. Furthermore, the lower body with the riding pants bunched up by the boots is also realistically depicted. Modelers can also choose to attach the standard brimmed tropical cap or one that does not have a brim. Use your painting skills to bring out the different fabric types and the dusty desert appearance. The relaxed expression of the figure is another highlight. The right hand can also be assembled to hold a canteen or a chameleon, which is of course in 1/16 scale as well. The base on which the figure stands has the atmosphere of the North African front, and a cactus, jerry can, and a canteen with cup are included as accessories, providing modelers with a simple vignette straight from the box.   Warning! Not suitable for children under 14 years.
€22.99
incl. VAT plus P&P

1:16 WWII Wehrmacht Officer

Article number: 300036315 Product: 1/16 WWII Wehrmacht Officer This is a 1/16 scale World Figure Series line-up model kit of a WWII Wehrmacht Officer. The realistically reproduced officer figure may be posed with a glove in his right hand as well as a Walther P38 pistol holster around his waist. 2 kinds of right arm parts are included to enable different poses. Separate parts to depict the jacket's collar and decoration medals including the Knight's Cross give the figure impressive realism. The parts which depict the medals themselves feature a sharp and detailed finish.
€22.99
incl. VAT plus P&P

1:20 Ferrari F189 Portuguese

Article number: 300020024 Product: 1:20 Ferrari F189 Portuguese To comply with the drastic regulation changes that took effect starting the 1989 F-1 racing season, the Ferrari team brought out their revolutionary F189 type 640 machine. Designer John Barnard and his staff have successfully developed a unique but very effective racer. The very esthetic body styling resembling a vase when viewed from above, is the result of extensive wind tunnel testing, and is said to provide better internal airflow. The normally aspirated, 3.5 liter displacement powerplant is Ferrari's traditional 12 cylinder in a V format, and incorporates 5 valves per cylinder. One of the more controversial features of this racer is the semi-automatic gear box. It is an electronically controlled, seven-speed gear box that aides the awesome powerplant in keeping its RPM powerband viable during all out competition circuit runs. The system is activated by a rocker located behind the steering wheel. The conventional clutch pedal is still present, but it is used only for starting the racer. The shock absorbers for the front push rod suspension system are mounted on top of the front monocoque section, enabling the racer to obtain an exceptionally narrow nose. When combines with the remarkable talents of drivers Nigel Mansell and Gerhard Berger, the Ferrari F189 has delighted motorsports fans with first class performance throughout the 1989 season.   Warning! Not suitable for children under 14 years.
€23.99
incl. VAT plus P&P

1:20 Lotus Type 79 1978

Art.Nr.: 300020060 Artikelbezeichnung: 1:20 Lotus Typ 79 1978 • 1/20 scale plastic assembly model kit of the Lotus type 79. • The front and rear upper cowls can be removed after assembly to view the engine and cockpit area. • The monocoque chassis, suspension, and engine have been precisely reproduced. • Synthetic rubber tires included. • Top quality decals to depict the Lotus seen at both British and German GP's, which did not feature JPS markings, are included. • Newly designed tires and metal funnel covers included. • Add further detail to your model with Item 12635 1/20 Lotus Type 79 1978 Photo-Etched Parts Set.
€62.99
incl. VAT plus P&P

1:20 Lotus Type 79 Martini 1979

Article number: 300020061 Product: 1:20 Lotus Typ 79 Martini 1979 - The front and rear upper cowls can be removed after assembly to view the engine and cockpit area. -Additional H and J Parts have been included (see image below) to accurately depict the differences from the Lotus Type 79 1978 (Item 20060). - Decals included.
€75.99
incl. VAT plus P&P

1:20 Seat Belt Set A

Article number: 300012637 Product: 1/20 Seat Belt Set A Add greater realism to your 1/20 scale Grand Prix model with this Detail-Up parts set. This set is perfect for models depicted from the early 1970's to the early 1980's. 1:20
€6.79
incl. VAT plus P&P

1:24 Calsonic Skyline GT-R (R34)

Article number: 300024219 Product: 1:24 Calsonic Skyline GT-R (R34) The unrivaled Nissan Skyline GT-R of the 1970's Japanese touring car races valiantly returned to the race circuit in 1990. Equipped with 2.6l, inline 6-cylinder twin turbo engines, two R32 Skyline GT-R's brilliantly triumphed in all six races. Particularly impressive was the bright blue Calsonic Skyline, which achieved five of the six victories to take the series championship. In 1993, the Calsonic Skyline was converted into a GT machine and brought out for the All Japan GT Championships, where it took top honors for three years running. From the middle of the 1995 season, the R33 version of the Skyline GT-R was brought out. The R33 was based on the 4WD production car, but was instead equipped with rear wheel drive. For the 1999 All Japan GT Championships, Nissan brought out a new machine, the R34. Compared to its predecessor, the R33, the R34 was constructed more compactly, with a narrow wheelbase. It was developed to take advantage of the reinforced chassis used on the production model brought out in January of that year. Except for the roof, the body was completely remade in carbon fiber and equipped with a large, curved wing on the rear- just one example of its aerodynamic and stylish form. Undergoing constant improvements since 1990, the inline, 6-cylinder DOHC twin turbo engine of the R34 is maximized with a 6-speed sequential transmission and rear wheel drive. The latest incarnation of the Skyline GT-R, the R34, promises to add more GT Championship Titles to Nissan's illustrious racing history. Calsonic GT-R (R34)
€23.99
incl. VAT plus P&P

1:24 Castrol Toyota Tom´s Supra GT

Article number: 300024163 Product: 1/24 Castrol Toyota Tom´s Supra GT The Japanese GT Car Championships were inaugurated in 1993, and are becoming more popular with motorsports buffs throughout domestic Japan. In addition to the highly modified Japanese cars, the super cars of Europe, like Ferrari, Lamborghini and Porsche, vie for the title. During the 1995 season Toyota entered a fleet of their race tuned Supra GT's into this popular event. Packed into the Supra look alike body shell was Toyota's latest racing technology. A 2,140cc, 4-cylinder turbocharged powerplant was taken from Toyota's Eagle Mk.III racing machine, which was active during the '93 IMSA races in the U.S.A. The X-Trac developed sequential 6-speed gearbox efficiently transmitted this engine's awesome power to the rear wheels. Four wheel double wishbone suspension components were taken from another Toyota prototype racer, the TS010. The body shell was extensively modified to obtain even better aerodynamics. Additional air intakes and outlets, oversized fenders and a huge rear spoiler, gave its massive silhouette and even more aggressive appearance. Four different racing teams used the Supra during the '95 season and among them, Tom's was sponsored by Castrol. Driven by skilled drivers Sekiya and Krumm, the Castrol Tom's Supra pleased the racing fans with its outstanding performance throughout the season.
€24.99
incl. VAT plus P&P

1:24 Figure-Set Rally Mechanics (5) w/A.

Article number: 300024266 Product: 1/24 Figure-Set Rally Mechanics (5) w/A. - Five Figures - Jack and stand, slope board, tool box, part box and more - Multiple team markings
€23.49
incl. VAT plus P&P

1:24 Honda S2000

Article number: 300024245 Product: 1/24 Honda S2000 Honda's first passenger production car, the S500 open two seater sportscar, was first announced in the 1962 Tokyo Motor Show, going on sale the following year. After the production termination of its successor, the S800, Honda moved away from producing front-engine/rear-wheel drive sports cars. September of 1998 saw the sensational rebirth of this type, with the announcement of the S2000. This open two seater features the traditional sports car look with a puposeful long nose/short deck styling. Futuristic headlights wrap around the side, appearing to be pulled back, poised for speed. The naturally aspirated 2.0 liter inline-4 DOHC-VTEC powerplant pumps out over 250hp, yet still manages to reduce toxic exhaust emissions to 1/10th the level of its predecessors. The positioning of the engine is also ideal, sitting just behind the front wheel axle in interest of 50/50 weight distribution. The sturdy body and superior road handling, meshed with a four-wheel double wishbone suspension and a newly developed 6-speed manual transmission, offer high tractability and synthesis between car and driver. The inside of the cabin features bucket seats, state of the art digital indicators, and a red button for starting the engine. Of course, the impact safe design, air bag, and all the other safety features of modern sports cars have also been thoroughly considered. Developed in celebration of Honda's 50th anniversary, the S2000 will surely take it place as the 2000cc sports car to beat in the 21st century.
€28.99
incl. VAT plus P&P

1:24 Honda S600 Convertible/Hardtop

Article number: 300024340 Product: 1/24 Honda S600 Cabrio/Hardtop The Honda S600 is an automobile manufactured by Honda. It was launched in March 1964. It was available as a roadster and as a fastback coupé – introduced in March 1965. The S600 was the first Honda available in two trim levels. During its production run up to 1966, the model styling would remain pretty much the same, with the most notable changes coming to the front grille, bumper, and headlights. The S600 got 57hp out of a 606cc 4-cylinder DOHC engine that could hold its own compared with racing engines, and it featured a motorcycle style chain-driven rear wheel drive. Exports to Europe followed as the S600 quickly gained respect, gaining popularity as a highly lightweight and speedy sports car. It was also to prove a success in races both inside and outside of Japan. The Tamiya model faithfully captures the essence of the S600, thanks to new tooling and updated parts from the S800 model kit. About the model: • This is a 1/24 scale plastic model assembly kit. • The compact, lowdown form of the S600 is covered with accuracy. • This kit is based upon Tamiya’s accurate kit of the S800 (Items 24190, 89657). New parts are included to depict S600-specific features such as the front grille and bumper unit, hood, radiator-top parts, brake and reverse lights, plus wheels. • The unique rear chain-drive unit-based trailing arm suspension is concisely and realistically captured, as is the front double wishbone setup. • Parts are included to recreate the S600 as an open top with folded down roof, or as a hard top. • Decals and metal transfers have been newly designed for this model.  
€41.99
incl. VAT plus P&P

1:24 Lexux LFA V10 Roadver. w/PE-Parts

Article number: 300024319 Product: 1/24 Lexux LFA V10 Roadver. w/PE-Parts Limited to only 500 units worldwide and coming at a bargain price of US$375,000 is Toyota's exotic sports car the Lexus LFA. Developed with the aim of creating a world-class supercar, the ultra-exclusive Lexus LFA is infused with the latest automotive technologies. It features a 4.8-liter V10 engine, a chassis equipped with a rear trans-axle, an interior which incorporates carbon fiber, and a sleek aerodynamic body.
€79.99
incl. VAT plus P&P

1:24 Mitsubishi Lancer Evo.V WRC

Article number: 300024203 Product: 1/24 Mitsubishi Lancer Evo.V WRC The name "Mitsubishi Lancer Evolution" made its first appearance at the 1973 World Rally Championships. After that, the Lancer participated on and off in rally activity until its return to the WRC in 1993. The reborn Lancer Evolution adopted a 4WD system, and was equipped with a 2L DOHC turbo engine, called the 4G63. Achieving a 2nd place finish in both the Indonesia Rally and the RAC Rally, the Lancer showed the world a glimpse of its speed. From the Evolution II in 1994, to the Evolution III in 1995, the Lancer was under continual development. In 1996, the Evolution III, driven by Tommi Makinen, won five races earning him a Driver's Title. Driving the Evolution IV in the following year, Tommi Makinen became a repeat champion. In 1998, the Evolution V made its debut in the 5th Catalonian Rally. The Evolution's most impressive feature is its wide body. With a blister fender on the front, and a fiberglass over fender on the rear, the width of the body was expanded to 177mm. Furthermore, by changing the shape of the front bumper and hood ducts, as well as by adding moveable wings and spoilers, the Evolution V was given even more punch. An electrically controlled active differential was adopted in the rear, as well as in the center and front of the car, ensuring high traction. The Mitsubishi Lancer Evolution V, driven by Tommi Makinen, showed the power of a champion throughout the year.
€28.99
incl. VAT plus P&P
Shipping Information

If you put these articles in your shopping cart, the shipping address of your order is restricted to the following countries:

to the top