This website uses cookies. By using the services of this website you consent to the usage of cookies.
OK
Tamiya CarsonMajoretteDickie ToysSchuco 

1:48 RAF De Havilland Mosquito Mk.6

Article number: 300061062 Product: 1:48 RAF De Havilland Mosquito Mk.6 Nicknamed "The Wooden Wonder" due to its nearly all-wood construction, the de Havilland Mosquito was initially conceived as a fast, unarmed bomber and went on to serve in that and many other roles during WWII. This kit depicts the NF Mk.II nightfighter and FB Mk.VI fighter-bomber variants which were introduced in Spring 1942 and Spring 1943 respectively. Parts are included for the NF Mk.II's nose- and wing-mounted radar antenna as well as 500lb bombs and rockets for the FB Mk.VI. The bomb bay may be fitted with bombs and also features details for the fuel tank and 20mm cannon magazines. Two pilot figures and three marking options are included.   Warning! Not suitable for children under 14 years.
€28.99
incl. VAT plus P&P

1:48 Rus. Ilyushin LI-2 Shturmovik

Article number: 300061113 Product: 1/48 WWII Rus. Ilyushin LI-2 Shturmovik The Ilyushin Il-2 was one of the most significant ground-attack aircraft of WWII. It incorporated a sturdy monocoque construction and excellent armor protection to make it perfect for ground attack operations. It was initially conceived as a two-seat design but due to weight issues it was re-designed as a lighter single-seat aircraft in 1940. As production began in 1941, the aircraft was designated as the Il-2. Heavy losses of the single-seat aircraft during combat forced the addition of a rear gunner position in 1943. Later variants featured improvements such as swept outer wings for better handling. The Il-2 contributed greatly to the eventual Russian victory over Nazi Germany. Joseph Stalin himself famously noted that the aircraft was as vital to the Russian Army as air and bread.   Warning! Not suitable for children under 14 years.
€58.49
incl. VAT plus P&P

1:48 Sd.Kfz 232

Article number: 300032561 Product: 1:48 Sd.Kfz 232 During the first half of WWII, German reconnaissance units greatly used the Sd.Kfz.231 series heavy armored car. Above all, the Sd.Kfz.232 was equipped with a Fu.11 radio and featured a large frame-type antenna mounted on the body. It also came armed with a KwK30 20mm cannon and an MG34 machine gun mounted on its turret. The 8-wheeled Sd.Kfz.232 had an on-road top speed of 90km/h, featured elaborate front and rear driving positions, and a superb 8-wheel drive system. These 8-wheeled armored cars were deployed to armored reconnaissance battalions of Panzer divisions and served as the eyes of the German army from Europe and North Africa to the Russian front. The Tamiya 1/48 scale model kit carefully captures all the fine detail of the full size subject. This subject was only previously available in 1/35 scale and it's now part of the Tamiya 1/48 scale model collection.
€29.99
incl. VAT plus P&P

1:48 Sd.Kfz. 251/1 Ausf.D Halftrack (2)

Article number: 300032564 Product: 1/48 Sd.Kfz.251/1 Ausf.D Halbkette (2) Of the many variables that take affect any conflict, supply and mobility are the most pressing.Germany realized this very early and developed a number of vehicles for this purpose,including the Sd.Kfz 251 half-track. This machine became the centerpiece of their mechanized corps throughout WWII. The half-track could drive on difficult terrain and could easily tow various kinds of trailers and cannons. The Ausf.D was designed for ease of production and various types were produced, including those equipped with wireless radios and gun turrets. However, the basic version was the troop carrier which seated 12and came armed with two MG42 machine guns. The half-track could be seen at every front and had an on-road top speed of 53km/h and a 300km operational range. Length: 126mm, Width: 48mm. As there were many variations of the Ausf.D, this 1/48 assembly kit model of the GermanMtl.SPW. Sd.kfz 251/1 Ausf.D Schutzenpanzerwagen depicts a personnel carrier. Parts such as the interior and undercarriage have been accurately reproduced with less parts for easy assembly. The included assembly type tracks have a realistic sag effect. A commander figure wearing a winter uniform and a soldier figure carrying a MG42 machinegun on his shoulders are included. (Total 2) Accessories such as the Panzerschreck, grenade cases, infantry equipment and so onare also included in this set. Three kinds of decals depicting Normandy and the Eastern front units are included.
€29.49
incl. VAT plus P&P

1:48 Sd.Kfz.251/1 "Stuka z.Fuss" Halftr.

Article number: 300032566 Product: 1:48 Sd.Kfz.251/1 "Stuka z.Fuss" Halftr. In 1931, the German Arm Weapons Agency began to research rocket technology. In 1941, the NbW 41 28/32cm rockets were the first rockets deployed to the front lines. These rockets could be launched from their simple launch frames. During WWII, the German army used the Sd. Kfz 251/1 as a mobile rocket launcher. The vehicle was equipped with five NbW 28cm rockets ad one NbW41 32cm rocket. Due to the destructive capability of these vehicles, the Sd. Kfz 251/1 was nicknamed "Stuka zu fuss" or "Ground Stuka", which referred to Luftwaffes Stuka dive-bomber.
€26.49
incl. VAT plus P&P

1:48 US North American P-51D Mustang

Article number: 300061040 Product: 1:48 US North American P-51D Mustang About the North American P-51D Mustang 8th AF In April 1940, drawings were sketched in a New York City hotel room for a new fighter aircraft for the British purchasing Commission. This fighter, the North American NA73X, became one of the best fighter aircraft in the U.S. Army Airforce during World War II, and is known as the P-51 Mustang. Of the several variations of this famous fighter, the P-51D is generally accepted as the definitive Mustang and was the first production version with the "Bubble" canopy. More "D" model Mustangs were built than all other Mustang variants combined, with a total of 9,603 coming off production lines. 45 squadrons of the famed U.S. 8th Airforce, stationed in England were equipped with the P-51D, which could now escort and protect the heavy bombers all the way to and from targets on the European continent. There were several major changes that set the "D" apart form earlier Mustangs. One was the change from four .50 caliber machine guns to six, three in each wing. Another was to mount the guns upright which helped to eliminate a jamming tendency that occurred in the four gun system. Ammunition was increased to 400 rounds per inboard gun, and 270 rounds for each of the other four. Underwing pylons were strengthened to carry the 110 or 165 gallon auxiliary drop tanks or 1,000 lb bomb. P-51D Mustangs went to fight in the later Korean conflict and it last flew combat in 1956 in the deserts to the Middle East, when Israel used Spitfires, Messerschimitts and Mustangs together in the Mid East conflict.   Warning! Not suitable for children under 14 years.
€27.99
incl. VAT plus P&P

1:48 US P-51B Mustang North Americ.

Article number: 300061042 Product: 1:48 US P-51B Mustang North Americ. About the North American P-51B Mustang The Allison engine powered P-51A Apache, was derived from the original RAF Mustang 1 ground attack and photo reconnaissance aircraft. Long before anyone had even heard of a Mustang, the plan to put a Rolls Royce Merlin engine into the airframe had started. The Merlin was powering some of the best warplanes in England; the Hurricane, Spitfire and the Avro Lancaster bomber. To develop a new engine for the P-51 would take considerable time, which the allies did not have. In September 1940, the Packard Motor Company of the U.S. began license production of the Merlin V-1650-1 engine in Detroit, Michigan. With a new supercharger drive, a new V-1650-3 was mated to the first P-51B. Both the U.S. and England started the Merlin engine modification idea almost simultaneously. 10 airframes were modified in the U.S. with the Merlin and these became the basis for the most successful fighter series of the war. Flying for the first time on 30 November 1942, the XP-51B was soon modified with a larger coolant radiator scoop, which actually increased its top speed by 50mph and gave it a higher ceiling by 10,000 ft. The addition of an 85 gallon fuel tank behind the seat increased the P-51B's already excellent range, and it could now escort the bombers all the way to the target and back. P-51B Mustangs began arriving in England in September 1943 with the first Mustangs going to the 3354th fighter group at Boxted, England, and ended the war with the most air to air victories. A total of 3788 P-51B's were produced.   Warning! Not suitable for children under 14 years.
€27.99
incl. VAT plus P&P

1:48 US Rep. P-47D Thunderbolt Bubblet

Article number:300061090 Product: 1:48 US Rep. P-47D Thunderbolt Bubblet About the Republic P-47D Thunderbolt "Bubbletop" In May 1941, as the war raged in Europe, a single-engine fighter of more than 4t made its first flight. This fighter was the XP-47B, prototype of the Republic P-47 Thunderbolt of which a total of 15683 units will be built. Thanks to war experience, this aircraft was equipped with a 2000hp radial R-2800 engine, a supercharger and eight 12,7mm machine-guns. The XP-47B was to reach 633km/h and in January 1942, just after the USA went to war, the production of P-47B began. It was followed by the P-47C that incorporated various improvements and, from April 1943, by the P-47D, the most built version. The P-47D was equipped with an R-2800-59 engine, which can develop up to 2300hp with combat emergency water injection system engaged. The ducts that were passing on the sides and below the cockpit to connect the supercharger placed behind the pilot's seat gave to this plane its massive aspect. Many sub-types of the P-47D, designated D-1 to D-40, were produced but the first versions were called "Razorback" because of their sharp edge dorsal fin. The D-25 sub-type, which was introduced around June 1944, was fitted with an electrically actuated bubble canopy in order to improve pilot visibility and increased capacity fuel tanks. This decision resulted in a completely remodeled plane shape. All subsequent sub-types were also fitted with the bubble canopy and became a characteristic feature of late production Thunderbolts. The P-47 "Bubbletop" proved to be an excellent, well-balanced fighter-bomber. About the model - Republic P-47D Thunderbolt "Bubbletop" plastic assembly kit. - 1/48 scale, Overall length: 230mm, Overall width: 259mm. - This is the representation of P-47D late production that was nicknamed "Bubbletop". - The massive form of the plane, especially its belly and its cowling, has been accurately reproduced. - Flaps come as separate parts and can be attached in   Warning! Not suitable for children under 14 years.
€45.99
incl. VAT plus P&P

1:48 US Vought F4U-1A Corsair

Article number: 300061070 Product: 1:48 US Vought F4U-1A Corsair About the Vought F4U-1A Corsair After enduring heavy losses to the Japanese Navy's Zero fighters in the early stages of the Pacific War, the U.S. Navy became focused on developing new fighters capable of turning the tides of aerial combat. Among those fighters was the Corsair, first developed to be a high speed, carrier borne aircraft. Built around the new Pratt & Whitney R-2800 2000hp engine, and turning the largest propeller ever attached to a fighter plane (4m dia.), this gull-winged wonder was destined to be a success. In June 1942, the F4U-1 production models made their maiden flight. However, due to their restricted forward field of view, and because of a propeller wash effect caused them to stall left wing first during low speed landings, they first were used as land based fighters. Succeeding the F4U-1 in the summer of 1943 was the F4U-1A, which was equipped with an extended rear wheel landing gear shaft, a slightly modified glazed canopy, and a small triangular strip of metal bolted to the right leading edge of the wing to equalize the stall and avoid the roll to the left at touch-down. Despite these improvements, the new F6F Hell Cat was adopted as the main carrier-borne aircraft, and the first combat Corsairs became relegated to land based US Marine squadrons in the South Pacific. Major Boyington and 2nd Lieutenant Hanson of the U.S. Marines, Lt. Kepford of the Navy and other ace-pilots, bravely flew the F4U-1A into fierce air-combats, overpowering the Japanese Zero fighters with tremendous top speed and six 12.7mm heavy machine guns.   Warning! Not suitable for children under 14 years.
€27.49
incl. VAT plus P&P

1:48 USN Douglas A1-H Skyraider

Article number: 300061058 Product: 1:48 USN Douglas A1-H Skyraider About Douglas A-1H Skyraider U.S. Navy During 1943 the U.S. Bureau of Aeronautics considered to combine the tasks of torpedo bomber and dive-bomber into one. Several aircraft manufacturers, such as Douglas and Martin, were requested to develop a large, single-seat attack aircraft. According to the requirement, Douglas Skyraider, was developed by Douglas Aircraft Company, Inc. The development was started in early July 1944, and all night efforts of engineers made the first prototype's first flight possible already on March 18, 1945. Despite the short period of the development, flight trials proved the airframe's flight characteristics satisfactory and the aircraft was rated very highly. In May 1945 a letter of intent for 598 production was signed. The name "Skyraider" was officially approved for the aircraft in February of the following year, and the distribution to units was started at the end of the same year. The Skyraider was powered by Wright R3350 radial engine yielding 2,800 horse power and equipped with three large dive brakes on the fuselage. The Skyraider had a number of types, from the AD-1 to AD-7, recording grand total number of production of more than 3,000. Among them, AD-6 was the most produced variant. The AD designation for the Skyraider was changed in 1962, and the AD-6 became the A-1H. Noted for its durability and a large capacity for external stores, the Skyraider was well liked by its pilots and crewmen.   Warning! Not suitable for children under 14 years.
€38.49
incl. VAT plus P&P

1:48 WWII Brit. Armo. scout car Dingo II

Article number: 300032581 Product: 1:48 Brit. Armo. scout car Dingo II This British armored scout car boasted enviable maneuverability and armor up to 30mm thick on its compact hull. Often referred to by its nickname of "Dingo", delivery of the Mk.I variant began in 1939; the later Mk.II featured various modifications, including an overhaul of the steering system. All told, more than 6,600 "Dingoes" were manufactured until 1945, serving in a range of locations in both reconnaissance and command car roles. About the Model This is a 1/48 scale plastic model assembly kit of the "Dingo" Mk.II. - Length: 69mm, width: 37mm. - The lightweight and compact form with distinctive flat panels is authentically recreated. - The model can be assembled with folding roof in open or closed position. - Suspension is realistically depicted with intuitive parts makeup. - Commander and driver figure are included in realistic action pose. - Contains one set of markings to recreate a vehicle in combat in Europe.   Warning! Not suitable for children under 14 years.
€15.89
incl. VAT plus P&P

1:48 WWII Citroen CV11 Staff Car

Article number: 300032517 Product: 1/48 WWII Citroen CV11 Staff Car Introducing the 1/48 scale Citroen 11CV, an all-new model developed specially for the 1/48 series. Originally a civilian sedan that was used by both French and German militaries during WWII, the 11CV model opens up new possibilities in the world of 1/48 military modeling, and bridges the gap between military, airplane and automobile model fans. About the Citroen 11CV This famous French sedan was produced from 1934 to 1957, its nickname in French is Traction Avant meaning front-wheel drive. Indeed, the innovative 11CV was one of the pioneers of front-wheel drive. Its versatility led to it being adapted for military use in great numbers, with the French, Free French and German occupying armies all employing 11CV cars. Germany deployed 11CVs to theaters all around Europe, including France, Italy and the Russian Front. German pilots often used the Citroen 11CV as their private car About the Model 1/48 scale model of the Citroen 11CV impressively reproduces the cars elegant curves. Underside of chassis features accurate detailing. The versatile Citroen 11CV served in a variety of military purposes, making it perfect for lining with 1/48 MM Series tanks or 1/48 scale airplanes. Also makes a wonderful setpiece for military dioramas. Car modelers will enjoy building the civilian model Citroen 11CV. Decals offer choice of 3 types of markings depicting French & German military versions.
€17.99
incl. VAT plus P&P

1:48 WWII Diorama-Set Brick Wall&Sandbag

Article number: 300032508 Product: 1/48 WWII Diorama-Set Brick Wall&Sandbag This kit assists modelers in recreating fortified positions and urban battlefields. Set includes easy-to-use bricks, bars and sandbags. 1/48 scale precision crafted items, may be used to add detail and atmosphere to military dioramas. Set includes anti-tank barricades made from train rails, as well as wooden pegs and pyramid shaped barricades Jerry can set (32510) available separately. Applicable to a variety of historical periods and modeling situations.
€13.79
incl. VAT plus P&P

1:48 WWII Diorama-Set Jerry Can&Barral

Article number: 300032510 Product: 1:48 WWII Diorama-Set Jerry Can&Barral Originally used by the Germans, Jerry cans Ewere soon used by the Allies as well to transport fuel and water. Set includes drum cans, Jerry cans, bags and other equipment for use with 1/48 MMV series models. Comes with both Allied and German versions.
€11.19
incl. VAT plus P&P

1:48 WWII Douglas A-1J Skyrider USAF

Article number: 300061073 Product: 1:48 WWII Douglas A-1J Skyrider USAF About the Douglas A-1J Skyraider U.S. Air Force Also going by the names Dauntless II, AD, A-1 Able Dog, and Spad, the Douglas Skyraider saw almost 30 years of service. The Skyraider's development started in June 1944. Not completed in time for WWII, its first combat came with the outbreak of the Korean War in June 1950. The first production version to roll out of the Douglas factory was designated the AD-1. Twelve years and seven versions later, over 3200 Skyraiders had been produced. Among those, the AD-6 version, also known as "Able Dog Six", was produced in the greatest numbers. The next and final version of the Skyraider, the AD-7, was extremely identical to the AD-6, but it had reinforced wing spars and wing fittings, as well as the strongest landing gear of all the variants. The AD-7 housed the new wright R-3350-26WB engine, which enabled a top speed of 285 knots. Due to a directive to standardize the designation of Navy and Air Force aircraft, AD-6 and AD-7 became known as A-1H and A-1J respectively. In 1965, when U.S. air operations in Vietnam became more aggressive, literally hundreds of Skyraiders, including the A-1J, were deployed to the 14th and 56th Special Operations Wings (SOW). Armed with Mk.82 and Mk.117 bombs, 20mm wing-mounted cannons, and rocket launchers, the Skyraiders were used in a wide variety of combat missions.
€40.49
incl. VAT plus P&P

1:48 WWII Dt. F.W. Fw190 F-8/9 m.Belad.

Article number: 300061104 Product: 1:48 WWII Dt. F.W. Fw190 F-8/9 m.Belad. In the latter half of WWII, the Luftwaffe Focke-Wulf Fw190 F series were the main aircraft used for air-to-ground assaults. The F-8, which entered the fray from the spring of 1944, was based on the A-8 aircraft and had the largest production numbers among the F series variants. The F-9 which had a superior engine output was also soon put into action. Both Fw190 F-8 and F-9 aircraft fought hard against the ever increasing numbers of Allied fighters up until the end of the war.
€40.99
incl. VAT plus P&P

1:48 WWII Dt. SdKfz.67 (6) w/ 3.7cm PAK

Article number: 300032580 Product: 1/48 WWII Dt. SdKfz.67 (6) mit 3,7cm PAK In the lead-up to WWII, Germany started to transform civilian vehicles into military ones, and one of the subjects was a light 6-wheel truck which was mass-produced starting in 1933. This 1936 evolution of the truck had a 60hp flat four square cylinder engine that mustered 55hp and provided up to 70km/h. The truck was used for transporting personnel and light artillery, and it utilized 6x4 independent suspension with rear 4-wheel drive. The first mass-produced variant was the Kfz.69, which was designed to tow a 3.7cm Pak 35/36 anti-tank gun and carried a driver and 5-artillery crew. It was employed as standard equipment in anti-tank artillery divisions and was seen in action in locations such as France, Poland, the Balkans, and Russia. The Tamiya model faithfully captures all of the details of the full-size subject thanks to extensive research of surviving samples left over from the war. Scale: 1/35 Length: 182 mm
€25.99
incl. VAT plus P&P

1:48 WWII Dt.Focke Wulf Fw190 A-8/A-8R2

Article number: 300061095 Product: 1:48 WWII Dt.Focke Wulf Fw190 A-8/A-8R2 Combating the Flying Fortresses   In 1944, as the U.S. began their long range strategic bombing campaign in earnest with heavily-armed B-17 and B-24 bombers, the Luftwaffe developed the specialized "bomber-killer" R2 variant of the Fw190 A-8. Tamiya now brings you this formidable fighter in the 1/48 scale, and with all the parts included in this kit you can choose to build either the R2 variant or the A-8. About the Fw190 A-8/R2   The Focke-Wulf Fw190 was one of the Luftwaffe's best front-line fighters of WWII. Of all the different variants, the A-8 armed with four 20mm cannon and two 13mm machine guns was the most widely produced. A sub-variant of the A-8 was the R2, which had two of the 20mm cannons replaced by more powerful 30mm guns and added armor protection for its role in attacking the giant 4-engined Allied bombers.   Warning! Not suitable for children under 14 years.
€35.99
incl. VAT plus P&P

1:48 WWII Dt.Heinkel He162A-2 Salamander

Article number: 300061097 Product: 1/48 WWII Dt.Heinkel He162A-2 Salamander The Luftwaffe's Last Hope As the situation became more desperate for the German forces near the end of WWII, a call was made for a new inexpensive jet fighter that would be simple to produce and fly. In the amazingly short span of 3 months from drawing board to first flight of the prototype, Heinkel produced the small, sporty-looking He162. The lightweight fighter featured mainly wooden construction and was powered by a BMW003 turbojet, which made it the fastest jet fighter of WWII with its 838km/h top speed. Reaching combat units in late March 1945, the little fighter managed to record some combat successes despite the acute fuel and parts shortage. About the Model High-quality assembly kit display model of the He162 A-2 "Salamander" jet fighter. ★Length: 205mm, Width: 149mm ★Top-mounted BMW003 turbojet engine with parts for opened and closed engine bay covers to allow full display of internal details. ★Special dolly included to display the engine separate from the aircraft. ★Canopy can be posed in the open or closed positions, and the ejector seat is removeable. ★Includes 1 pilot figure and 4 types of markings.     Warning! Not suitable for children under 14 years.
€38.49
incl. VAT plus P&P

1:48 WWII Figure-Set Ger.Inf.Maneuv.(15)

Article number: 300032530 Product: 1/48 WWII Figure-Set Ger.Inf.Maneuv.(15) Our latest 1/48 scale figure set features WWII German soldiers in relaxed poses, standing, walking, wearing field caps and with weapons shouldered. Also includes figures depicting tank crew at rest. 2 all-new officer figures and military policeman, which are available now for the first time in any scale, are also included. This set is perfect for modeling non-combat scenes and dioramas of life behind-the-lines. Set includes 7 machine gun crew on maneuvers, 2 standing infantry, 3 tank crew, 2 officers and 1 military policeman for a total of 15 figures. Infantry figures feature realistic M43 field uniforms. Includes separately molded weapons and equipment such as machine gun tripod mount.
€11.99
incl. VAT plus P&P

1:48 WWII Figure-Set Ger.Pz.Grenadi.(15)

Article number: 300032514 Product: 1/48 WWII Figure-Set Ger.Pz.Grenadi.(15) German Figures Set Part 2 Adding a 3rd figure set to our popular 1/48 MM Series, this selection features Late WWII German Panzer Grenadiers together with tank crewmen and a driver and officer figure specially designed for displaying with 1/48 scale light vehicles such as the Schwimmwagen. About the Uniforms The German army in WWII is known for employing a wide variety of advanced and creative camouflage uniforms. One example is the reversible camouflage smock which featured a spring pattern on one side, and fall pattern on the other. The M44 fatigues issued from spring 1944 featured pea pattern camouflage of green, gray, brown and black spots on a neutral background. German troops such as Panzer grenadiers used this uniform, together with a variety of camouflage smocks, in the latter part of the war. Armored crews initially wore black fatigues, but began using camouflage uniforms from the middle of the war. While some units favored black leather jackets, the hooded combat jacket issued in 1942 was used widely until the closing days of WWII.
€15.89
incl. VAT plus P&P

1:48 WWII Ger. 20mm Flakvierling 38 (4)

Article number: 300032554 Product: 1/48 WWII Ger. 20mm Flakvierling 38 (4) About the Flakvierling 38 Originally developed as a light anti-aircraft weapon for the Kriegs marine, the German army also adopted the 20mm cannon for use on land and was widely-used throughout WWII. To compensate for the cannons low rate of fire, 4 of these cannons were mounted together to create the Flakvierling 38. The mount featured collapsible seats, ammo cartridge racks, a three-legged base, and could be rotated via hand wheels, with the guns themselves fired via two foot pedals,each of which controlled a pair of diametrically opposed cannons. In basic form, the Flakvierling38 was loaded onto a 2-wheeled mount for towing to deployment points, but it was also fitted onto halftracks, tank chassis, ships, barges, and trains to provide close-range air defense against Allied fighter-bombers. About the Model High-quality 1/48 scale assembly model kit of the German Flakvierling 38 anti-aircraft gun. Quad-20mm cannons are linked to gunsight. Guns can be freely elevated/depressed and gun pedestal can be rotated to enable various firing positions. Parts are included for the trailer, enabling the gun to be towed by 1/48 scale vehicles such as ITEM 32534 6X4 Krupp Protze (Kfz.70). 4 figures in realistic poses as well as detailed accessories such as ammunition boxes and magazines are included as well. Excellent as a stand-alone diorama piece or as a component in larger displays
€19.99
incl. VAT plus P&P

1:48 WWII Ger.Kübelwagen Typ 82 Pkw.K1

Article number: 300032501 Product: 1/48 WWII Ger.Kübelwagen Typ 82 Pkw.K1 Tamiya now introduces the first item in the 1/48 Military Miniature Vehicle Series: The Kubelwagen Type 82. This very popular vehicle was not only employed by the Wehrmacht but also by the Luftwaffe. This vehicle is perfect for people who want to create realistic dioramas. Set includes 2 figures. Front doors come as separate parts and can be attached in opened or closed position. About the German Kubelwagen Type 82 In February 1936, Dr. Ferdinand Porsche presented his first prototype of the "People's Car", which was to be the base of the Volkswagen "Beetle". However, with the outbreak of WWII, all manufacture of the Volkswagen was immediately turned to military production. In January 1938, German Defense Forces presented specifications for a military version of this practical vehicle. In November of that same year, a prototype was completed and it was officially designated Pkw. K1 "Kubelwagen" Type 82. The vehicle used a light but sturdy monocoque construction with foldable canvas top. With its reliable engine and heavy duty suspension, the Kubelwagen immediately came to be used by every unit, from the scorching desert of Africa to the frozen Russian Eastern Front. About 51,000 Kubelwagens, including several variations, were rolled out from the factory by the end of WWII.
€17.99
incl. VAT plus P&P

1:48 WWII Ger.Schwimmwagen Typ166 Pkw.K2

Article number: 300032506 Product: 1/48 WWII Ger.Schwimmwagen Typ166 Pkw.K2 About the Schwimmwagen Designed by Dr. Ferdinand Porsche, the amphibious Schwimmwagen was used by the German land forces, paratroopers and engineering corps during WWII, fulfilling both reconnaissance and liaison duties. Capable of both 2 and 4 wheel drive, the Schwimmwagen was widely respected for its ability to maneuver on a variety of difficult terrain. Featuringa high-set exhaust pipe and a rear mounted 25hp air-cooled 4-cylinder 1,130cc engine, the Schwimmwagen could reach top speeds of up to 80km/h on land and 10km/h in water. Propelled in the water by a screw propeller, which was easily raised above the rear engine deck when driven on dry land, steering whilst in the water was done just like on land, using the front wheels as rudders. Mass-produced from 1942, 14,276 type 166 Schwimmwagen were produced by the end of 1944.
€17.29
incl. VAT plus P&P

1:48 WWII Ger.Truck Krupp Protze w/8Fig.

Article number: 300032534 Product: 1:48 WWII Ger.Truck Krupp Protze w/8Fig. One of the fan-favorites in 1/35 scale, the German Krupp Protze 6-wheeled truck finally joins the 1/48 scale MM Series. Every characteristic of this truck, such as its low-profile bonnet, infantry carrier on rear and double wishbone suspension, has been realistically reproduced. Set also includes driver and infantry passenger figures to heighten realism and atmosphere. The 1/48 MM Series offers not just tanks, but also a rich variety of auxiliary and support vehicles for endless diorama possibilities. This vehicle was popularly known as the "Boxer" because it had an air-cooled flat-four square engine. This in turn allowed a flat sloping engine cover of quite unmistakable shape which also gave excellent forward visibility and a low silhouette. The Krupp "Boxer" was quite ubiquitous in application and the chassis carried body work for a considerable number of different roles. Aside from its air-cooled engine, the "Boxer" also had an independent suspension system, differing from the conventional springing systems of other six-wheelers in German service. 1/48 assembly model kit of the German 6x4 Truck Krupp Protze (Kfz.70). Overall length 107.5mm. Die-cast under panel adds weight and realism. Separately molded suspension spring for extra realism. Includes accessories such as Jerry cans, rifles and jack. Comes with 8 figures, including driver and passengers.
€25.49
incl. VAT plus P&P

1:48 WWII German Motorcycle&Sidecar (2)

Article number: 300032578 Product: 1/48 WWII German Motorcycle&Sidecar (2) Add some more detail to your 1/48 scale dioramas with this scale model of a German motorcycle and side car. Side cars were paired with motorcycles by German forces in many areas of the WWII conflict, and their excellent off-road ability combined with the bike’s engine power made them a useful asset in transporting soldiers and equipment, some even being mounted with machine guns.
€13.79
incl. VAT plus P&P

1:48 WWII IJN Komatsu G40 Bulldozer(1)

Article number: 300032565 Product: 1/48 WWII IJN Komatsu G40 Bulldozer(1) During WWII, Japanese forces developed the Komatsu G40 Bulldozer to aid in airfield construction. This was the first bulldozer manufactured by the Japanese. One hundred and forty-eight G40 bulldozers were built throughout the war. The G40 was sent to the northern and southern fronts, but due to the war few managed to reach their assigned airfields. Only one G40 survived the war, and can be seen at the Komatsu Techo Center in Shizuka, Japan. The Japan Society of Mechanical Engineers recognized the vehicle in 2007 as a Mechanical Engineering Heritage item.
€21.49
incl. VAT plus P&P

1:48 WWII Jp.Mitsub.A6M5/5a Zero Fighter

Article number: 300061103 Product: 1:48 WWII Jp.Mitsub.A6M5/5a Zero Fighter The Mitsubishi A6M Zero was the Japanese Navy’s main fighter throughout the course of WWII. In the latter half of the war, the Model 22 was refined to create the Model 52 to counter new U.S. aircraft such as the P-38 Lightning and F4U Corsair. It featured 50cm shorter wings with rounded wingtips, individual exhaust pipes and top speed of 565km/h. A6M5a was produced with a larger capacity (125 rounds) belt-type cannon ammunition system in February 1944. The Model 52 first saw action during the closing stages of the Solomons campaign in the autumn of 1943 and went on to fight in the skies above the Marianas, Iwo Jima, Okinawa, as well as Japan itself, until the end of the war. This is a 1/48 scale assembly plastic model of the Mitsubishi A6M5/5a Zero Fighter. ★Length=190mm, Width=229mm ★Zero fighter’s elongated proportions from nose to tail and the exquisite engine cowling are all accurately reproduced thanks to a complete measurement of the actual plane. ★Highly detailed cockpit and main landing gear well parts. ★Choice of an up or down flaps, as well as open or closed cowl flap. ★A6M5a with belt-type cannon ammunition system can be recreated. Differences from the A6M5 such as wing panels, spinner and wooden drop tank are highly detailed. ★3 types of markings are included. ★In addition to a sitting pilot figure, 4 different types of standing pilot figures are included.   Warning! Not suitable for children under 14 years.
€45.99
incl. VAT plus P&P

1:48 WWII US Re.P-47D Thunderb.Razorback

Article number: 300061086 Product: 1:48 US Re. P-47D Thunderb. Razorback In 1943, the 8th Air Force was launching raids on Germany with its B17 and B24 from England. The aim was to destroy German main production factories. Unfortunately, losses during theses missions were very heavy and it became urgent to develop a fighter able to escort the bombers over enemy soil. The limited ranges of the Spitfire and P-38 Lightning did not make these fighters able to go further than Paris, leaving the bombers alone to fend for themselves for the rest of the flight. With the development of the P-47, this problem was overcome. The P-47 was the first single-seated fighter to be equipped with a supercharger, allowing it to fly at the same high altitude as the bombers. This high-flying fighter was armed with eight 12.7mm machineguns that proved very useful in the intense fighting that occurred in the European skies. Equipped with drop tanks for longer range, the P-47D was then able to escort the bombers all the way to the German border. The Thunderbolt also allowed many Allied pilots to become Aces. Bomber crews plagued day after day by intensive German interceptions, would remark that the presence of the P-47 was of great help.   Warning! Not suitable for children under 14 years.
€45.99
incl. VAT plus P&P

1:48 WWII US Willys Jeep w/Fig.-Set (9)

Article number: 300032552 Product: 1/48 WWII US Willys Jeep w/Fig.-Set (9) Following the release of ITEM 32547 WWII German Tank Crew Field Maintenance Set, Tamiya is now planning another substantial figure and accessory set to add to our 1/48 MM lineup. This set will feature several U.S. infantry figures in life-like poses and an assortment of accessories that can be used to liven up any diorama.
€29.99
incl. VAT plus P&P

1:6 Honda CB750F 1979

Article number: 300016020 Product: 1/6 Honda CB750F 1979 This is a 1/6 scale plastic assembly kit model of the Honda CB750F, which quickly gained popularity after its release in 1979. ★The beautiful curved lines of the bike have been realistically reproduced. ★The air-cooled inline 4-cylinder 4-carburetor engine features detailed cooling fins and spark plug cables which are depicted with vinyl tubing. ★The metal front forks have a beautiful metal plated finish and coil springs that enable it to move. ★Exhausts also feature a smooth metal plated finish. ★In addition, side covers are removable to showcase the internal mechanisms even after assembly.
€99.99
incl. VAT plus P&P

1:6 Honda Gorilla Spring Collection

Article number: 300016031 Product: 1/6 Honda Gorilla Spring Collection About the Honda Gorilla Spring Collection In 1967, Honda Pioneered the field of "leisure motorcycles" with the release of the Monkey. The uniqueness of the Monkey made it an instant hit among the young and young at heart. In August 1978, Honda released the big brother of the Monkey and appropriately named it "Gorilla". Save the gas tank and seat, the Gorilla adopted fundamentally the same parts as the Monkey. The most defining aspect of the Gorilla is its swelled chest, an oversized gas tank, which boasts a capacity of 9 liters providing a 630km maximum running distance. Its powerplant was a 49cc air-cooled single cylinder SOHC engine, which was also used on Honda's best selling Super Cub. The Gorilla was also equipped with a manual 4-speed transmission, opposed to the automatic 3-speed system of the Monkey. Production was ceased in 1992 but the popularity of the machine, however did not dwindle, with the few remaining used Gorillas fetching premium prices. It was in February 1998 when Honda resumed production, this time bringing out a new Gorilla equipped with the Monkey's large headlamp and using chrome parts on the headlight casing, fender and other places. January 1999 saw the production of 3500 "Honda Gorilla Spring Collection" machines. This version was meant to shine, and features chrome parts on virtually every visible part of the bike. The gas tank, the side-cover, the front forks, the chain case, the wheels, the exhaust pipe cover, even the frame and swing arm glisten with gorgeous chrome. About the Model ★1/6 scale plastic assembly kit. Overall length: 226mm, width: 104mm, height: 183mm, ★Every characteristic of the 1998 version of the Honda Gorilla such as the larger headlamp, front fork, tank cap and emblems applied on the tank have been accurately replicated. ★Chrome-plated areas of the actual machine have been reproduced with metal-plated parts.   Warning! Not suitable for children under 14 years.
€61.99
incl. VAT plus P&P

1:6 Honda Monkey 2000 Anniversary

Article number: 300016030 Product: 1/6 Honda Monkey 2000 Anniversary About the Honda Monkey 2000 Anniversary It was back in 1961 that a curious mini-motorcycle was seen putting around Honda's "Tama Tech" amusement park. One of the most popular rides in the park, it sported a red frame under a white gas tank, tiny 5 inch tires and a peppy 50cc engine. Riders were said to appear, of all things, simian, and henceforth the motorcycle came to be known as the Honda Monkey. Looking more like a toy than a motorcycle, the compactness and fresh appearance of the Monkey scored high with fans of all ages. Honda revamped the Z100 park version for use on public roads, and brought out the CZ100 model which began to be exported in 1963. The first model to be marketed in Japan was the improved Z50M Monkey, which featured folding handlebars and seat for easy stowing in a passenger car. In January 2000, Honda brought out the 2000 anniversary edition of the Monkey, which sported the image coloring of the 1971 Z50Z(2) model. The production of this special Monkey was limited to 3000 motorcycles. The continued appeal of the Monkey must be both its diminutive size and ease of customization. Each Monkey owner is free to interchange any number of components including the engine parts, carburetor, exhaust pipe and suspension. In fact, over 1500 custom parts are marketed for this playful mini-bike.  
€66.99
incl. VAT plus P&P

1:72 F-16CJ w/FULL EQUIPMENT

Article number: 300060788 Product: 1/72 F-16CJ w/FULL EQUIPMENT This is the second release of the 1/72 scale F-16CJ [Block 50] Fighting Falcon (original Tamiya release: Item 60786) now with parts depicting underside equipment used on the aircraft! The versatile F-16 Fighting Falcon's adaptability to both air-to-air and air-to-ground missions makes it one of the cornerstones of the U.S. Air Force today. Block 50 evolutions of the aircraft were deployed from 1991, F-16CJ fighters being fitted with radar countermeasures. The aircraft's capabilities were extended yet further via the CCIP program, which gave night fighter functionality and more. Equipment depicted using new parts Centerline fuel tank Wing underside fuel tanks ECM counter measures pod AGM-88 HARM missiles AN/ASQ-213 HTS targeting pod AIM-120 AMRAAM missiles AIM-9M & -9X Sidewinder missiles AN/AAQ-33 Sniper XR pod   Warning! Not suitable for children under 14 years.
€40.49
incl. VAT plus P&P

1:72 II-2 Stormovik

Article number: 300060781 Product: 1:72 II-2 Stormovik The Ilyushin Il-2 Shuturmovik was the Russian military's representative ground-attack aircraft during WWII. Over 36,000 examples were built by the end of the war, making it the most produced military aircraft in aviation history. The aircraft was characterized by armor that was integrated into its airframe to provide protection for vital areas such as the cockpit, engine, and fuel tank. Production of the single-seat version of the Il-2 began in March 1941 but severe losses led to the development of a two-seat version with a rear gunner. A version which featured outer wing sections swept back at 15 degrees for a better center of gravity was introduced in late- 1943. Together with the T-34 tank, the Il-2 contributed greatly to the eventual Russian victory. The Tamiya 1/72 aircraft model faithfully captures all the details of this historic aircraft. The Il2 is also available in 1/48 scale for those modelers who have extra display space in their war bird collection.   Warning! Not suitable for children under 14 years.
€31.99
incl. VAT plus P&P

1:72 Ki-61-Id Hien

Article number: 300060789 Product: 1:72 Ki-61-Id Hien This scale plastic model kit accurately depicts the Kawasaki Ki-61-Id Hien. The Hien was officially adopted by the Imperial Japanese Army in 1943, and stood out among its Japanese aircraft contemporaries in the Pacific War on account of its liquid-cooled Ha-40 engine, slimline fuselage and long, elegant wing. A number of different variants were produced, among them the Ki-61-Id which featured a 20cm-elongated nose to house 20mm cannons, plus 12.7mm machine guns in the wing. In fact, with 1,360 units it was the most prolifically produced Hien variant; its superior performance at higher altitudes meant that it was often given the brief of taking on incoming U.S. B29 bombers in the skies around the home islands of Japan.   Warning! Not suitable for children under 14 years.
€23.49
incl. VAT plus P&P

1:72 ME-BF 109E-4/7 TRUP

Article number: 300060755 Product: 1:72 ME-BF 109E-4/7 TRUP During the first half of the Second World War, the Messerschmitt Bf109 E was the main fighter of the German airforce. The E-4 housed a 1,100hp Daimler Benz DB 601Aa engine and was armed with two 7.92mm machine guns on the nose, as well as a 20mm cannon on each wing. For some aircraft, bullet-proof glass was used to reinforce the front of the canopy. In addition, a 20mm canon, which ran through a tube in the propeller was supposed to be installed but was unsuccessful. Displaying superb acceleration and diving ability, the E-type planes overpowered the RAF's Hawker hurricane and equaled the Spitfire fighters in the Battle of Britain. However, with a flight range of only 560km, the E-4 planes were limited to just fifteen minutes of combat over British skies. Thus, the bombers were not given sufficient support and sustained heavy damage. As a result, the Luftwaffe's strategy to bomb England into surrender ended in failure. To deal with this drawback, the E-4 planes were equipped with additional 300L fuel tank. These improved fighters, called E-7, were first deployed at the end of 1940. After the Battle of Britain, the E-4/7 planes were sent to the front lines of Northern Africa. As the Bf109 F-type fighter's production was advanced, the E-4/7 was retired from the front lines. However, some veteran pilots continued to use the E-4/7 mainly for ground support duty until the summer of 1942. Bf109E-4/7 TROP
€15.89
incl. VAT plus P&P

1:72 Mits. A6M3 Zero Fighter Mo. 32 Hamp

Article number.: 300060784 Product: 1:72 Mits. A6M3 Zero Fighter Mo. 32 Hamp The 1/72 scale Warbirds Collection welcomes the A6M3 Zero fighter Model 32, which was codenamed ‘Hamp’ by American forces. The Model 32 was an evolution of the Model 21; it received an improved Sakae 21 engine and shorter, redesigned main wing, with the effect that its top speed increased by 11km/h and it also had improved roll and diving speed, albeit at the cost of increased fuel consumption. In fact, this plus with the Model 32’s smaller fuel tank meant its range was some 1,000km shorter. The Model 32 made its maiden flight on July 15th 1941, and first saw service with the 2nd Fighter Group in Rabaul, the Philippines. All told, 343 Model 32 aircraft were manufactured, a number so low in part due to the range limitations of the aircraft. About the Model • This is a 1/72 scale plastic model assembly kit. • The model faithfully replicates the form of the A6M3 Zero Model 32 with square-shaped wings. • Main wing, fuselage, and engine cowl are all newly-designed parts. • Features such as flaps integrated with wing parts make this model easy to build while still retaining an excellent grasp of the aircraft’s details. • 3 sets of markings included.   Warning! Not suitable for children under 14 years.
€19.79
incl. VAT plus P&P

1:72 Supermarine Spitfire Mk.I

Article number: 300060748 Product: 1:72 SUPERMARINE SPITFIRE MK1 The Supermarine Spitfire is regarded by many as the most esthetically designed single seat fighter to appear during the Second World War. It was conceived by the brilliant British designer Reginald J. Mitchell, and first flew on 5 March 1936. It was an advanced, low wing single seat monoplane with a very smooth flush riveted metal skin and a long flowing front cowling. Using the famous RollsRoyce "Merlin' liquid cooled 12 cylinder engine that produced more than 1,000 horsepower, the Mk I Spitfire attained a top speed of 586km/h. The very distinctive elliptical shaped wing was useful in reducing parasitic drag and allowed a fairly thin wing construction. It carried a large coolant radiator under the starboard wing, and a small oil cooler under the port wing, giving it an asymmetrical appearance when viewed from the front and bottom. The retractable main landing gear also contributed to its smooth lines, and gave it higher performance. The Mk I Spitfire was armed with eight 7.7mm machine guns, four to each wing. The early production of Mk I Spitfires used a fixed pitch wooden two blade propeller, which was later replaced with a two-pitch wooden two blade propeller. The Spitfire's combat action in thwarting Germany's attempt to raid the English mainland during 1940, and known as the "Battle of Britain" has ensured this fighter's pride of place in the minds of England's men and women forever. Supermarine Spitfire Mk.I
€14.99
incl. VAT plus P&P

1:72 US F-16CJ Fighting Falcon

Article number: 300060786 Product: 1:72 US F-16CJ Fighting Falcon The Lockheed Martin F-16 Fighting Falcon is a single-engine multirole fighter aircraft originally developed by General Dynamics for the United States Air Force (USAF). It was designed as an air superiority day fighter and later it evolved into a successful all-weather multirole aircraft. As of 2012, over 4,500 aircraft have been built since production was approved in 1976. In 2004 and in 2008 Tamiya’s model designers captured this iconic fighter in 1/48 scale and in 1/32 scale respectively, which both models received tremendous accolades from the modeling community and the industry press. The third release continues Tamiya’s tradition of excellence with this 1/72 cale model. This version is specifically of the F-16CJ (Block50) and it shares some of the same level of details as its larger counterparts. It is the perfect scale model for modelers confined to smaller display areas to show off their hard modeling work.
€27.99
incl. VAT plus P&P

1:72 USA F. BELL X-1 MACH BUSTER

Detailed Plastic Kit of model USA F. BELL X-1 MACH BUSTER in scale 1:72
€12.69
incl. VAT plus P&P

1:72 WWII Mitsubishi A6M5 Zero Fighter

Article number: 300060779 Product: 1/72 WWII Mitsubishi A6M5 Zero Fighter This is the definitive 1/72 plastic model of the Japanese Navy's representative fighter aircraft, the Mitsubishi A6M5 Zero Fighter. History of the Zero fighter: The Mitsubishi A6M Zero was the Japanese Navy's main fighter throughout the Pacific Theater during WWII. In the latter half of the war, the model 52 Zero, a refined version of the model 22, aimed to take on the ever increasing numbers of high-performance U.S. aircraft. It featured a shorter 11m wingspan with rounded wingtips, was powered by the same 1130hp Nakajima "Sakae" engine as seen in the model 22 Zero, and had the new exhaust propulsion system which gave it a 565km/h top speed. The A6M5 came armed with two 7.7mm machine guns and 20mm belt-fed cannons. Deployment of the A6M5 began in the autumn of 1943, and they saw action in the Solomons campaign as well as over the Marianas. It defended Japan against overwhelming numbers of superior U.S. aircraft up until the very last day of the war.
€21.99
incl. VAT plus P&P

Actros 3363 (Pearl Blue)

Article number: 300056354 Product: Actros 3363 (Pearl Blue) This is a special edition of the Mercedes-Benz Actros 3363. It features pre-painted Body parts in Pearl Blue (Tamiya Color TS-89) for a cool look, with a durable coating applied to protect the paintwork from damage.  About the Mercedes-Benz Actros 3363 6x4 GigaSpace  This is a highly accurate 1/14 scale radio control model that recreates the Mercedes Benz Actros 3363 3-axle truck. The Actros series debuted in 2011 and was named 2012 Truck of the Year. Powered by a 15.6-liter inline-6 turbocharged diesel putting out a max of 630hp, the actual 3363 can haul up to 250 tons!  The Tamiya rendition faithfully captures the truck's modern form with the use of ABS plastic body parts and a number of metal chassis components. One look at the detailed interior and auxiliary equipment, such as air tanks, will confirm that the body features replica-quality realism, which is further enhanced with metal transfers depicting emblems and numerous metal-plated parts. The chassis is built for durability as it uses aluminum side channels with resin cross members. Drivability is accomplished by power from the front-mounted motor and is transmitted via a propeller shaft to the rear axle; built-in differential gears guarantee smooth cornering. Gear changes can be made via a separately-sold 4-channel transmitter.  The Actros' realism can be further heightened with separately-available trailers that can be attached to its coupler and make the model over a meter in length!      Warning! Not suitable for children under 14 years.
€519.99
incl. VAT plus P&P

Actros 3363 GigaSpace

Article number: 300056348 Product: 1/14 RC Mercedes-Benz Actros - 3363 6x4 GigaSpace This is a highly accurate 1/14 scale radio control model that recreates the Mercedes Benz Actros 3363 3-axle truck. The Actros series debuted in 2011 and was named 2012 Truck of the Year. Powered by a 15.6-liter inline-6 turbocharged diesel putting out a max of 630hp, the actual 3363 can haul up to 250 tons! The Tamiya rendition faithfully captures the truck's modern form with the use of ABS plastic body parts and a number of metal chassis components. One look at the detailed interior and auxiliary equipment, such as air tanks, will confirm that the body features replica-quality realism, which is further enhanced with metal transfers depicting emblems and numerous metal-plated parts. The chassis is built for durability as it uses aluminum side channels with resin cross members. Drivability is accomplished by power from the front-mounted motor and is transmitted via a propeller shaft to the rear axle; built-in differential gears guarantee smooth cornering. Gear changes can be made via a separately-sold 4-channel transmitter. The Actros' realism can be further heightened with separately-available trailers that can be attached to its coupler and make the model over a meter in length!     Warning! Not suitable for children under 14 years.
€499.99
incl. VAT plus P&P

Arocs 3348 Tipper Red/Silver

Article number: 300056361 Product: Arocs 3348 Tipper Red/Silver This is a special edition of the R/C Mercedes Benz Arocs tipper truck (Item 56357), the stylish 3-axle truck with movable bed and distinctive bucket tooth grille. It is a great option for those without the time or confidence to apply a paint job to their kit, as parts come pre-painted in TS-8 Italian red (cab, H, K, and M parts) and TS-17 Gloss aluminum (rear bed and CC parts), and given a urethane coating for a beautiful, lasting finish. About the Model • This is a 1/14 scale R/C model assembly kit.    Length: 576mm, Width: 190mm, height: 267mm. • The Arocs 3348 form is recreated by an injection molded    body, with separate side mirrors and visor, etc. • Cab, H, K, and M parts are molded in red PS and    pre-painted in Italian red (TS-8), while bed and CC parts    are molded in gray ABS and pre-painted in Gloss aluminum (TS-17).    All have a urethane top coat. • The 3-axle chassis has a tough ladder frame with aluminum side    channels and resin cross members. • Truck bed section is comprised of metal subframe and resin    panel sections for superb durability. • Compatible with Electric Actuator Set (Item 56545) for realistic    truck bed motion. • TR mighty-tuned motor (35T) provides twin rear axles with ample    power to carry loads in the bed. • Rear tires, rear fenders and taillights have dedicated tipper    truck model designs. • 3-speed transmission can be controlled via a separately    sold 4ch R/C transmitter. • Metal leaf spring dampers with built-in coil springs provide    durable suspension. • Compatible with MFC-03 (Item 56523) (or MFC-01, Item 56511)    for realistic lights and sounds.   Warning! Not suitable for children under 14 years.
€619.99
incl. VAT plus P&P

Arocs 3348 Tipper Truck

Article number: 300056357 Product: Arocs 3348 Tipper Truck Tip-Top! The Arocs series is a line of heavy-duty models introduced in 2013 by the world's leading truck manufacturer, Daimler AG (Germany). This R/C model assembly kit recreates the dual rear axle-driven Arocs 3348 6x4 tipper truck, which runs on a 12.8-liter turbocharged inline-6 engine capable of 480hp. The highly detailed body breathtakingly captures the slimline form of the truck cab, including the distinctive bucket tooth design grille. Depictions of headlight guards, front bumper and skid plate underneath are parts of a truly realistic finish. The assembly type 3-speed transmission allows gear changes via separately available 4-channel transmitter. The ladder frame chassis features aluminum side channels with resin cross members. A realistic 1-piece resin bed is reinforced with a metal frame. Power from the front-mounted motor is delivered to rear axles via propeller shaft; a built-in differential gear on each axle enables smooth cornering. Highly-realistic suspension utilizes metal leaf springs and friction dampers. The model enjoys easy driving thanks to the float-mounted die-cast front and reinforced resin rear axles.   Warning! Not suitable for children under 14 years.
€569.99
incl. VAT plus P&P

Arocs 3348 Tipper Truck

Article number: 300156357 Product: Arocs 3348 Tipper Truck Tip-Top! The Arocs series is a line of heavy-duty models introduced in 2013 by the world's leading truck manufacturer, Daimler AG (Germany). This R/C model assembly kit recreates the dual rear axle-driven Arocs 3348 6x4 tipper truck, which runs on a 12.8-liter turbocharged inline-6 engine capable of 480hp. The highly detailed body breathtakingly captures the slimline form of the truck cab, including the distinctive bucket tooth design grille. Depictions of headlight guards, front bumper and skid plate underneath are parts of a truly realistic finish. The assembly type 3-speed transmission allows gear changes via separately available 4-channel transmitter. The ladder frame chassis features aluminum side channels with resin cross members. A realistic 1-piece resin bed is reinforced with a metal frame. Power from the front-mounted motor is delivered to rear axles via propeller shaft; a built-in differential gear on each axle enables smooth cornering. Highly-realistic suspension utilizes metal leaf springs and friction dampers. The model enjoys easy driving thanks to the float-mounted die-cast front and reinforced resin rear axles.   Warning! Not suitable for children under 14 years.
€589.99
incl. VAT plus P&P

Arocs 3363 (Light Gun Metal)

Article number: 300056359 Product: Arocs 3363 (Light Gun Metal) This is a special edition of the R/C Mercedes Benz Arocs (Item 56352), the super-stylish 3-axle truck with distinctive bucket tooth grille. It is a great option for those without the time or confidence to apply a paint job to their kit, as the cab, H, K, and M parts of the kit are pre-painted in Light Gun Metal (Tamiya Color TS-42), and given a urethane coating for a beautiful finish, and protection from damage. About the Model • This is a 1/14 scale R/C model assembly kit. Length: 529mm, width: 190mm, height: 267mm. The narrow body of the ClassicSpace variant Arocs 3363 is recreated accurately, complete with the distinctive "buckettooth" grille and headlight guards. Cab, H, K, and M parts are molded in gray, pre-painted in Light Gun Metal (TS-42), with a urethane top coat for a stunning finish. Photo- etched parts recreate cab rear platform. • Interior features such as seat and dashboard are depicted. • 3-axle chassis utilizes ladder frame with aluminum side channels and resin cross members. Realistic drivetrain has a front mounted motor powering twin rear axles. • 3-speed transmission can be controlled via 4ch R/C transmitter. • Highly realistic suspension employs metal leaf spring dampers and friction dampers. • Coupler is included to enable connection with any currently available Tamiya 1/14 scale trailer. • Compatible with tractor truck option parts (TROP) such as Items 56531, 56532, 56536 and 56538. Use with Multi-Function Control Unit MFC-03 (Item 56523) (or MFC-01, Item 56511) for realistic lights and sounds.     Warning! Not suitable for children under 14 years.
€449.99
incl. VAT plus P&P

Arocs 3363 6x4 ClassicSpace

Article number: 300056352 Product: Arocs 3363 6x4 ClassicSpace This 1/14 scale tractor truck recreates the Mercedes-Benz Arocs 3363 3-axle truck, which is the first narrow bodied European tractor model in the Tamiya Tractor Truck Series. The full-size subject is the German company's heavy duty tractor head that debuted in 2013. Powered by a 630hp 15.6-liter inline-6, the actual Arocs is capable of hauling massive loads of up to 250 tons. The Tamiya rendition faithfully captures the truck's modern form with the use of ABS plastic body parts and a number of metal chassis components. One look at the detailed interior and auxiliary equipment, such as air tanks, will confirm that the body features replica-quality realism, which is further enhanced with metal transfers depicting emblems and numerous metal-plated parts. The chassis is built for durability as it uses aluminum side channels with resin cross members. Drivability is accomplished by power from the front-mounted motor and is transmitted via a propeller shaft to the rear axle; built-in differential gears guarantee smooth cornering. Gear changes can be made via a separately-sold Tamiya 4-channel transmitter.     Warning! Not suitable for children under 14 years.
€429.99
incl. VAT plus P&P

Audi A4 quattro Touring TT01E

Article number: 300047414 Product: Audi A4 quattro Touring TT01E • This is a 1/10 scale R/C model assembly kit.    Length: 454mm, width: 186mm. • The Audi A4 form is captured accurately in polycarbonate. • Separate molded parts recreate side mirrors and sporty rear wing. • Stickers are included to recreate markings for both no.5 and    no.45 cars (they raced in different touring car series), with    masking stickers to help during the paint job. • 18-spoke wheels are molded in Silver, and paired with slick tires. • The TT-01 Type-E chassis features shaft-driven 4WD for easy    handling, and great customizability. • A wide range of option parts is available to tune the TT-01    Type-E chassis.   Warning! Not suitable for children under 14 years.
€134.99
incl. VAT plus P&P

Audi Quattro A2 (TT-02)

Article number: 300058667 Product: Audi Quattro A2 (TT-02) Here comes the latest new entry into the line-up of models on the adaptable and easy-driving TT-02 chassis. It recreates the Audi Quattro A2, which graced the 1983 WRC scene from midway through the season, contributing to driver Hannu Mikkola’s eventual Drivers’ Championship. About the Model • This is a 1/10 scale R/C model assembly kit.   Length: 458mm, width: 187mm. • The classic quattro A2 body is molded accurately in   lightweight and durable polycarbonate. • Features separate metal-plated ABS parts for front   and rear light cases, plus fog lamps. Side mirrors,   wing and wing caps are molded in white ABS. • Please note that light cases are compatible with separately   sold LEDs; fog lamps are not. • 5-spoke wheels are molded in silver, and paired with   racing radial tires. • The TT-02 chassis is an adaptable and balanced design with   excellent stability, plus features such as identical suspension   arm and upright components for ease of assembly. • 4-bevel differential gears and 4-wheel double wishbone suspension   make for a smooth ride. • An extensive TT-02 option parts line-up offers a number   of opportunities to tune your car.   Warning! Not suitable for children under 14 years.
€149.99
incl. VAT plus P&P

Avante (2011) Black SP

Article number: 300047390 Product: Avante (2011) Black SP Tamiya is delighted to announce the re-issue of this special version of the Avante (2011), which was originally released to commemorate the 35th anniversary of Tamiya R/C car products. It sports a color scheme inspired by its Mini 4WD cousin the Avante Black Special. About the Model • Original Item No.: 84270 • This is a 1/10 scale R/C shaft-driven 4WD buggy assembly kit. Length: 420mm, width: 240mm, height: 140mm. Wheelbase: 260mm. • Carbon-fiber parts such as 2mm thickness upper & lower decks, plus rear damper stay offer superb strength. • Includes Avante (2011) Racing Steering Set, with a 2mm thickness carbon fiber steering plate and 850 ball bearings giving silky smooth motion. • Includes Avante (2011) Torque Splitter Set, with torque splitter and ball differentials for sure-footed traction. • 4-wheel double wishbone suspension has metal shafts for great customizability. • Aluminum front uprights are the same design as on the original Avante, and offer great strength and rigidity. • Spike tires are mounted on fluorescent pink wheels. • Comes with a 25T motor featuring a special label applied.   Warning! Not suitable for children under 14 years.
€549.99
incl. VAT plus P&P

Blackfoot (2016)

Article number: 300058633 Product: 1/10 RC Blackfoot (2016)  Tamiya announces this modern successor to the Blackfoot line of cars. It features the classic body from the Blackfoot III (Item 58498) mounted on the chassis used in the Monster Beetle (2015) model (Item 58618), an all-action 2WD chassis fitted out with big tires for rough-and-tumble off-road fun. This model promises to be great fun for both beginners and Tamiya veterans alike!  About the Model • This is a 1/10 scale R/C model assembly kit. Length: 440mm, width: 290mm, height: 270mm. • The ABS resin Blackfoot III body is given newly designed markings that carry on the theme of the original series of models. A resin driver figure is also included. • The rugged ABS space frame chassis utilizes double-wishbone front and trailing arm rear suspension setups in tandem with CVA oil dampers. • Rear universal drive shafts come with rubber boots to protect from dust. • A resin undercover protects the sealed gearbox at the rear of the model. • 123mm semi-pneumatic lug pattern tires are paired with yellow 1-piece wheels.   Warning! Not suitable for children under 14 years.
€209.99
incl. VAT plus P&P
incl. VAT plus P&P

Buggyra Fat Fox (TT-01E)

Article number: 300058661 Product: Buggyra Fat Fox (TT-01E) Here comes a new addition to the stable of racing trucks in the world of Tamiya R/C! This model recreates the Buggyra Racing Fat Fox piloted in the 2018 season of the European truck racing circuit by 2017 champion Adam Lacko. You’ll be able to have exciting truck races with your friends, just like the real ones thrilling fans on major circuits around Europe this summer! About the Model • This is a 1/14 scale R/C model assembly kit. Length: 420mm, width: 187mm, height: 188mm. • The Buggyra Fat Fox form is captured by a 3-piece polycarbonate body (2 cab components and body) put together using double-sided tape. • Separate polycarbonate rear fender and coupler parts, molded plastic side mirrors and 2-piece rear bumper. • Included stickers recreating the sponsors and livery of the #1 truck for the 2018 season, driven by Adam Lacko. • Black molded wheels and 70mm diameter radial tires are specifically designed for racing truck models. • Features molded parts compatible with 5mm taillight LEDs in separately-sold Tamiya LED Light Unit. • The TT-01 Type-E chassis features shaft-driven 4WD with easy handling and great customizability. • A wide range of option parts is available to tune the TT-01 Type-E chassis.   Warning! Not suitable for children under 14 years.
€159.99
incl. VAT plus P&P

Cable 0.65mm OD Bla

Article number: 300012676 Product: 1:6/1:12/1:24 0,65mm Kabel/Schlauch 2m This cable features a wire core in vinyl casing. It’s great for reproducing the various piping and cables which appear on Tamiya's highly realistic scale car and motorcycle models. The wire core ensures greater flexibility and durability than standard hollow tubing in Tamiya model kits. • Length: 2 meters. • Please note that using these cables will require the making of holes in the subject model.
€3.99
incl. VAT plus P&P

Cable 1mm OD Bla

Article number: 300012678 Product: 1:6/1:12/1:24 1,00mm Kabel/Schlauch 2m This cable features a wire core in vinyl casing. It’s great for reproducing the various piping and cables which appear on Tamiya's highly realistic scale car and motorcycle models. The wire core ensures greater flexibility and durability than standard hollow tubing in Tamiya model kits. • Length: 2 meters. • Please note that using these cables will require the making of holes in the subject model. .
€3.99
incl. VAT plus P&P

Carbon Decal Plain F

Article number: 300012679 Product: Carbon Decal Plain F Carbon weave decals are a great way to enhance your models level of realism. Many of Tamiya’s car and motorcycle subjects have parts that depict raw carbon parts, such as winglets, spoilers, and body panels. With Tamiya carbon fiber decal sheets, you can easily replicate these parts on your model with relative ease. Simply cut to the size and shape of the section that you want to cover, and apply. When used in conjunction with Tamiya MARK FIT and MARK FIT STRONG (Tamiya’s decal setting solution solvents), forming the decal sheet to curved surfaces make application even easier. • Sheet dimension: 130mm x 190mm x1. • Sheet features no pre-marked shapes and can be cut to desired shape and size. • Great for use on static models of bikes, cars and more from 1/6 to 1/24 scale. .
€7.59
incl. VAT plus P&P

Citroen 2CV Charleston (M-05)

Article number: 300058655 Product: Citroen 2CV Charleston (M-05) This radio control model faithfully recreates the world-renowned Citroën 2CV Charleston. The polycarbonate body sits on top of Tamiya’s fun to drive M-05 front wheel drive chassis. Over 3.5 million cars were produced from 1948 to 1990. Its reliable air-cooled 2-cylinder engine got the little front wheel drive car from A to B with little fuss, and the car could accommodate 4 adults adequately. With its soft suspension designed for off-road driving, it is said that the 2CV could traverse a ploughed field without breaking any of the eggs it carried. M-05 at a glance: The front wheel drive M-05 chassis features a lightweight, narrow, durable, and easy-assembly semi-monocoque resin frame. Gearbox, motor, battery pack, receiver, servo and ESC are positioned for optimum weight distribution and a low center of gravity. Ground-hugging 4-wheel independent double wishbone suspension and the 3-piece steering linkage provide stable high-speed cornering. Gun metal color 11-spoke wheels are matched with tread-patterned radial tires and feature tire inserts.   Warning! Not suitable for children under 14 years.
€134.99
incl. VAT plus P&P

Citroen 2CV Rally (M-05Ra)

Article number: 300058670 Product: Citroen 2CV Rally (M-05Ra) Tamiya is delighted to announce this new rally version kit of that legendary motoring icon, the Citroën 2CV. The kit features a highly realistic recreation of the body, modified for rally races, and based upon a dedicated rally chassis in the form of the M-05Ra. About the Model - This is a 1/10 scale R/C model assembly kit.   Wheelbase: 239mm. - The acclaimed polycarbonate body is paired with separate   bumper and side mirror parts, plus new depictions of a   recovery ladder and attachment bracket. - The stylish wheels are paired with rally block tires. - Based on the front-wheel drive M-05 chassis, the rally-tuned   M-05Ra features specially designed hub carriers and front/rear   uprights to increase ground clearance by 5mm. Front skid guard   and side guards are also included. - The chassis is based around a lightweight, narrow and durable   semi-monocoque frame, and is at home both on gravel and asphalt. - A host of Hop-Up Option parts is available to soup up your chassis   even further.     Warning! Not suitable for children under 14 years.
€144.99
incl. VAT plus P&P

Comical Frog (WR-02CB)

Article number: 300058673 Product: Comical Frog (WR-02CB) The popular Comical Buggy series of WR-02CB models gathers even more momentum with the upcoming release of another comical-ized classic – the Comical Frog! First introduced in 1983. The original Frog 2WD racing buggy made a huge splash with its eyecatching design and top-drawer performance, plus a single seater buggy-inspired body that drips realism. The legend continues with the Comical Frog, which features a new stylized body, bubble tires and exciting chassis that offers hours of fun. About the Model • This is a 1/10 scale R/C model assembly kit. • Brand new polycarbonate body takes heavy inspiration    from the Frog and gives it a quirky new look. Separate    pieces recreate light cases (front and rear) and lenses    (for front lights). • Pink and white 2-piece wheels use bubble tires    (front: ribbed, rear: round block) for a fun look and drive. • Comes with a helmeted driver figure with hands gripping    a steering wheel, to add even more life. • The monocoque WR-02CB chassis has a pre-assembled    gearbox with motor already attached. • Long suspension arms and CVA oil dampers make for    excellent off-road performance, while underguard and    side guards give great protection. • Rear wheelie bar helps support the model when it leans back,    maintaining a fun wheels-in-the air stance as the model plunges    forward. • Light cases are compatible with separately sold 5mm LEDs    to light up the model.   Warning! Not suitable for children under 14 years.
€169.99
incl. VAT plus P&P

Comical Grasshopper (WR-02CB)

Article number: 300058662 Product: Comical Grasshopper (WR-02CB) The Grasshopper needs little introduction – a Tamiya legend which has inspired legions of fans since the 1980s. Now the legend is re-imagined as the Comical Grasshopper, with a new body inspired by the famous original, and based upon a new and dedicated variant of a proven off-road chassis: the WR-02CB. It promises to be a fun and highly accessible kit that will be of great interest to beginners and veteran R/C drivers alike. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 356mm, width: 244mm. Wheelbase: 170mm. • The WR-02CB chassis is a new variant specifically for this kit, with superb performance both on- and off-road. • The chassis retains the durable monocoque centerpiece and inline battery pack position, 4-wheel double wishbone suspension and 2-piece steering tie-rod. • A brand new polycarbonate body takes the original Grasshopper form as a base, giving it a bold re-design for the shorter chassis. Stickers are also inspired by those on the original. • Headlight cases come as standard, allowing installation of separately sold 5mm LEDs. They use separate polycarbonate lens components. • Comes with a driver figure for installation in the model. • Suspension arms feature multiple damper attachment holes for easily adjustable performance. • Utilizes 2-piece wheels designed specifically for this model, and molded in durable ABS. • Tires are also brand new, with rib pattern front and block pattern rear tires. • CVA Mini shock units provide superb cushioning, even on rough off-road surfaces.   Warning! Not suitable for children under 14 years.
€169.99
incl. VAT plus P&P

Comical Hornet (WR-02CB)

Article number: 300058666 Product: Comical Hornet (WR-02CB) The WR-02CB chassis has enjoyed great popularity since its debut on the Comical Grasshopper (Item 58662), and now plays host to another comical re-imagining of a Tamiya classic – this time, the subject is the legendary Hornet, which inspired this model's stylish new body. About the Model - This is a 1/10 scale R/C model assembly kit. - Brand new polycarbonate body takes heavy inspiration   from the Hornet and gives it a quirky new look. - Orange and white 2-piece wheels use bubble tires   (front: ribbed, rear: round block) for a fun look and drive. - Comes with a helmeted driver figure (the same base as in   Item 57407 Dual Rider) with hands gripping a steering wheel,   to add even more life to the model. - The monocoque WR-02CB chassis has a pre-assembled   gearbox with motor already attached. - Long suspension arms and CVA oil dampers make for excellent   off-road performance, while underguard and side guards give great protection. - Rear wheelie bar helps support the model when it leans back   maintaining a fun wheels-in-the air stance as the model plunges forward. - Light cases are compatible with separately sold 5mm LEDs to light up the model.   Warning! Not suitable for children under 14 years.
€174.99
incl. VAT plus P&P

De Havilland Mosquito FB Mk.VI

Article number: 300060747 Product: De Havilland Mosquito FB Mk.VI The De Havilland "Mosquito" made of wood was designed based on "high-speed bomber shaking off fighter". The design of the Mosquito was got in shape in 1939. The De Havilland had experienced producing "DH88 Comet" made of wood before, therefore they paid attention that the surface of wooden wing could be finished smoothly and the amount of aluminum could be saved. Two of Rolls Royce Merlin engines were selected as the source of power and the wood was used as the material of this fuselage. The parts with the metal were only the parts of the periphery of the engine and the landing gear. At the first time, the Air Ministry was passive adopting the Mosquito because of wooden and no machine guns. However the Mosquito made a maiden flight with the maximum speed of 630km when the "Spitfire" had the maximum speed of 580km at those time. Therefore a lot of "Mosquito" were suddenly requested. After many types of the Mosquito were produced, Night-Fighter Mk. II armed with 7.7mm machine guns on its nose and A.I.Mk.IV radar made an appearance. This Mosquito brought its ability into full play in attacking an airfield and intercepting raiding bombers. Also Fighting Bomber Mk. VI armed with four 225kg bombs and eight of rocket bombs was arranged as the actual fighting in Mar. 1943. This type played havoc with theland forces, the battleships and the U-boat. Furthermore it was active in attacking the railroad and its bridge at Burmese front line, giving a blow to Japanese army. The mosquito's wooden structure was strong against being shot, therefore it held an established position from the pilots with the special mission. Detailed Plastic Kit of model De Havilland Mosquito FB Mk.IV in scale 1:72
€21.49
incl. VAT plus P&P

Dynahead 6x6 (G6-01TR)

Article number: 300058660 Product: Dynahead 6x6 (G6-01TR) Tamiya is delighted to announce the latest 6-wheeled beast in our line-up, the Dynahead 6x6, which takes inspiration from the big trucks used in the gruelling offroad world of truck trials. It appears on a new chassis variant named the G6-01TR, based upon the G6-01, with hub reduction axles providing extra height for taking on rougher terrain. With a stylish body penned by self-proclaimed "hyper designer" Takayuki Yamazaki from Japan, (Dual Ridge, etc.) it is sure to be a fun addition to your R/C garage! About the Model • This is a 1/18 scale 6WD R/C model assembly kit. Length: 453mm, width: 244mm, height: 232mm. • Wheelbase: 173+126mm. • The cab-over truck body is a brand new design by Takayuki Yamazaki. • Hub reduction axles raise ground clearance by 15mm; in conjunction with the traction provided by a 37.35:1 gear ratio (with kit-included 18T pinion), the Dynahead 6x6 has awesome off-road and crawling capability! • 5-spoke wheels are paired with V-tread block tires (Item 53854) for superlative bite. • With suspension reassembly and a separately-sold transmitter with 4WS function and R/C equipment, the rear wheels can be made steerable.   Warning! Not suitable for children under 14 years.
€289.99
incl. VAT plus P&P

F104 PRO II w/Body

Article number: 300058652 Product: F104 PRO II w/Body Power up your R/C formula racing life with this kit, which pairs the lightweight and streamlined direct drive F104 chassis with a new lower deck, and upgrade parts, giving a sharp and responsive drive. An all-new original body is also included! About the Model • This is a 1/10 R/C model assembly kit. Length: 440mm, width: 180mm, height: 88mm, wheelbase: 270mm. • The lightweight F104 chassis is fitted with various upgraded parts to turn it into the F104 PRO II. • FRP double deck chassis has a new lower deck design, and an inline (longitudinal) battery position. • The 1.5mm thick FRP T-bar design with U-shaped cutaway is inherited from the F104WGP. It makes up the rear suspension in concert with friction plates and a TRF damper. • Features front independent coil spring suspension. Alter camber by changing upper mount attachment direction. • Utilizes an aluminum ball differential. Rear wheels can be changed without its being dismantled. • A realistic original polycarbonate body is included. Its design is inspired by 2017 trends, with a sharp, slanting nose and bulging side pontoons. Additional parts are included to create alternative lower side pontoon sections as separate parts for chassis with larger R/C equipment. • Separate parts depict the complex front wing and its low rear counterpart, rear diffuser, mirrors, helmet, etc. • Comes with realistic semi-pneumatic synthetic rubber tires, and marking stickers to decorate the body. • A wide range of Hop-Up Option parts are available to further tune the chassis to your needs.     Warning! Not suitable for children under 14 years.
€229.99
incl. VAT plus P&P

Ferrari Testarossa

  Warning! Not suitable for children under 14 years.
€24.49
incl. VAT plus P&P

Focke-Wulf Fw190 A-3

Article number: 300060766 Product: Focke Wulf Fw 190 A-3 Development of the FW190 series began in the Autumn of 1937, under a contract issued by the Reichsluftfahrtministerium (Air Ministry) for a single seat fighter to supplement the Messerschmitt Bf109. Two proposals were submitted by Kurt Tank, the technical director of the Focke-Wulf Flugzeugbau (aircraft factory). The proposal using the then new BMW 801 aircooled radial engine was chosen. This tough and powerful engine was placed in a robust airframe and provided superb handling, well balanced control, and brisk acceleration. It entered service in 1941, flying alongside the Bf 109 and it soon took control of air superiority over the English Channel. Establishing itself as a mainstay fighter of the Luftwaffe, it outperformed the contemporary Spitfire Mk.V's in almost every respect and maintained this advantage until the arrival of the Spitfire IX in July 1942. The Fw190 fighter underwent constant improvement throughout its life. The A-3 version used the improved BMW 801Dg engine that produced 1,700hp. Armament was increased from four to six guns, consisting of two rapid firing MG151's in the wing roots; two MG FF's outboard of the landing gear and two fuselage mounted MG 17 machine guns. Throughout WW2, many Luftwaffe squadrons allowed personal pilot markings and distinctive squadron insignia to be used, plus lower cowl, wing tip and rudder color additions to the original paint schemes. Detailed Plastic Kit of model Focke Wulf Fw 190 A-3 in scale 1:72
€14.99
incl. VAT plus P&P

Focke-Wulf Fw190 D-9

Article number: 300060751 Product: 1:72 Focke Wulf Fw 190 D-9 Following the successful entry of the Focke-Wulf Fw190 A series of fighter aircraft over the English channel during the autumn of 1941, the German RLM requested a high altitude version to complement the fighter fleet, and three projects were started. The Fw 190B used the B.M.W. 801 turbo-supercharged radial engine and a pressurized cockpit, but very few of these were built. The Fw190C was powered by a 1,750hp Daimler Benz DB603A in-line engine, of which three prototypes were built. The third high altitude project was based on the Focke Wulf Fw190A airframe and powered by a Junkers engine. The fuselage was lengthened to accommodate the V-12 cylinder, liquid cooled, 1,750hp Jumo 213 engine, and made its initial flight during the winter of 1941-42, Five further prototypes were produced, plus a small batch of Fw190 D-0s were completed from standard production Fw 190A-7 airframes. These pre-production aircraft were followed by the Fq-190D-1's which had the increased area vertical fin and rudder. There were no Fq190 D-2 through D-8 designations. The Fw-190D9 began production in June 1944, with early versions having the flat topped canopy, and from W.Nr 210001 onwards having the Galland hood (blown canopy). It went into combat with the III/JG 54 "Grunherz" (Green Hearts) in September 1944, at Achmer, Germany, as top cover for the new Messerschmitt Me262 jet fighters then entering service. Detailed Plastic Kit of model Focke Wulf Fw 190 D-9 in scale 1:72
€14.99
incl. VAT plus P&P

Ford Mustang GT4 (TT-02)

Available from April 2019 Article number: 30058664 Product: Ford Mustang GT4 (TT-02) Inspired by the Ford Shelby GT350R-C, the Ford Mustang GT4 was designed to compete in GT4 category racing across the world. Powered by a 5.2-liter V8, and sporting a 6-speed sequential paddle shift transmission, Multimatic suspension and aerodynamically refined body, the Mustang GT4 cuts a thrilling figure. Now, it makes a triumphant entrance into the Tamiya range of R/C models. The TT-02 chassis is adaptable and fun to drive – a great choice to get started with R/C touring cars! About the Model • This is a 1/10 scale R/C model assembly kit. Length: 459mm. • The muscular form is captured in polycarbonate, and was designed with access to the actual car’s CAD data for superb accuracy. Front and rear light cases are also molded in polycarbonate. • Wheel arches are pre-cut out for a simpler body assembly experience. • The beginner-friendly, highly adaptable TT-02 is a versatile and easy to maintain shaft-driven 4WD chassis. • Separately molded plastic components depict rear wing and side mirrors. • Racy 10-spoke wheels are molded in gun metal and paired with slick tires. • Stickers are included to create an original livery, as are masking stickers for use when painting. • An extensive TT-02 option parts line-up offers a number of opportunities to tune your car.   Warning! Not suitable for children under 14 years.
€139.99
incl. VAT plus P&P

G 320 Cabrio (MF-01X)

Article number: 300058629 Product: 1/10 RC Mercedes-Benz G 320 Cabrio - MF-01X The Mercedes Benz G320 Cabrio was a G Class series vehicle that was sold between 1997 and 2001. While many G Series cars were produced, this version featured a soft convertible top and was based on a short wheelbase version of the chassis. The Tamiya radio control replica is featured on the 4WD MF-01X chassis. About the MF-01X: Power is transmitted from the rear mounted motor to the front wheels via a propeller shaft that runs down the side of the MF- 01X. Gearboxes are integrated into the monocoque for a sturdy and easy-to-assemble structure. The MF-01X has a three-section make-up; changing the central spacer section enables short (210mm), middle (225mm), and long (239mm) wheelbases. The Mercedes-Benz G 320 uses the long wheelbase configuration. Length: 385mm, width: 178mm, height: 175mm Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.
€159.99
incl. VAT plus P&P

GR SUPRA (TT-02)

Article number: 300058674 Product: G.R. Supra (TT-02) The Supra is a classic name in Japanese motoring, but one which had been out of production since 2002. It was big news for motoring fans, then, when a new Supra was announced at the Detroit Auto Show in 2019. The cutting edge car makes a swift entry into the Tamiya R/C model line-up with this model on the TT-02 chassis. About the Model • This is a 1/10 R/C model assembly kit. Length: 457mm, width: 188mm. • The powerful, alluring body is molded accurately in lightweight and durable polycarbonate, with separate light cases front and rear*. • Features separate molded parts for side mirrors. • Twin 5-spoke wheels are molded in black, and paired with racing radial tires. • The TT-02 chassis is an adaptable and balanced design with excellent stability, plus features such as identical suspension arm and upright components for ease of assembly. • 4-bevel differential gears and 4-wheel double wishbone suspension make for a smooth ride. • A plethora of Hop-Up Option parts is available to tune the TT-02 chassis to your needs. *light cases are not compatible with LEDs.   Warning! Not suitable for children under 14 years.
€139.99
incl. VAT plus P&P

Hornet

Article number: 300058336 Product: 1:14 RC King Hauler Black Edition This is a specially-released edition of Item 56301 King Hauler, which was the first item in the 1/14 Tractor Trucks Series back in 1993. The body and P parts of the kit come pre-painted in Metallic Black for a cool look. About the Model • 1/14 scale R/C tractor truck model assembly kit. • Length: 600mm, Width: 180mm, Height: 255mm. • Body and P parts are replaced with pre-painted Metallic Black parts. • Features a tough ladder frame construction with aluminum side channels and resin cross members. • Metal leaf spring dampers with built-in coil springs provide durable suspension. • Coupler is included to enable connection with any currently available Tamiya 1/14 scale trailer. • A wide variety of Tractor Truck Option Parts are available for you to further customize your machine.   Warning! Not suitable for children under 14 years.
€124.99
incl. VAT plus P&P

Impreza Monte-Carlo 99 (TT-02)

Article number: 300058631 Product: 1/10 Impreza Monte-Carlo 99 (TT-02) The TT-02 chassis line-up is Tamiya's entry level 4WD platform. It allows new kit builders an easy gateway into the world of on-road running due to its easy construction, balanced performance and high aftermarket Hop-Up Option support. This TT-02 kit features the Subaru Impreza rally car that took part in the Monte Carlo Rally of the 1999 World Rally Championship (WRC) season. The Impreza was a legendary force in the WRC from the 1990s and into the next millennium, with 3 manufacturers' championships in a row from 1995-1997. In 1999 they were still competitive with an impressive 1-2 finish for drivers Kankkunen and Burns in Argentina (round 7). The TT-02 chassis incorporates many features to make it easy for the new R/C kit builder to assemble and learn from. The TT-02 chassis performs well, as cornering and overall speed has been enhanced to take advantage of new electronics available on the market. In addition to the TT-02 being an ideal platform to start from, R/C hobbyists can expand its potential by adding many of the Hop-Up Options available to increase the cars speed and performance. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.
€154.99
incl. VAT plus P&P

Kawanishi Shiden Type 11

Article number: 300060768 Product: 1/72 Kawanashi Shiden Type 11 Evolving from the Kawanishi N1K1 "Kyofu" floatplane, the Imperial Japanese Navy's N1K1-J Shiden had a unique pedigree amoung WW2 landplane fighters of the world. In January 1942, the Kawanishi Aircraft firm began adaptation of the Kyofu into a land based fighter, strictly as a private venture. This project was soon officially authorized under the designation N1K1-J, with the first prototype flying in December 1942. The airframe was basically the same as its predecessor, with main landing gear and tall wheel replacing the floats. In place of Kyofu's Mitsubihi Kasei engine, a more compact and powerful Nakajima Homare engine was installed. Excellent performance and superb maneuverability was achieved using this engine, however it brought about serious problems. In order to use all of the available power in the engine, a large diameter propeller was required. This required unusually long main landing gear legs, because of the midwing configuration. This caused difficulties in the landing gear retraction system. Kawansihi engineers managed to solve the problem by introducing telescopic main landing gear legs. The complex gear system and unreliability of the engine, plagued the N1K1-J throughout its career, until the introduction of the improved, low-wing N1K2-J Shiden-Kai. About 1,000 N1K1-J fighters were produced and were active around the Phillipine islands, Formosa, Okinawa and over the Japanese Island of Honshu. Detailed Plastic Kit of model Kawanashi Shiden Type 11 in scale 1:72
€13.79
incl. VAT plus P&P

Konghead 6x6 (G6-01)

Article number: 300058646 Product: Konghead 6x6 (G6-01) Take a look at Tamiya's first ever big-wheeled 6WD model - the Konghead 6x6! This model utilizes a new geardriven 6WD chassis which used the GF-01 as a starting point. The excellent drive it provides will make for supremely fun off-road driving.   Warning! Not suitable for children under 14 years.
€219.99
incl. VAT plus P&P

Kubelwagen Type82 Africa Corps

Article number: 300036202 Product: 1:16 Kübelwagen Type 82 Afrika Korps Kubelwagen-Africa Version Because of its reliability and ease of repair, and since its engine did not require a coolant, the Kubelwagen proved particularly effective in North Africa. At the request of various divisions in North Africa for a vehicle suitable for the desert, a Continental balloon tire equipped version went into production from 1942. Two types of balloon tires, a grooved and an ungrooved version were used. Because the tires were wider than normal tires, a spacer to raise the height of a spare tire attachment was added to the hood of the car. Some of the balloon tire equipped Type 82 were even used in Italy after the fighting in North Africa stopped in May of 1943. About the model •1/16 scale plastic model construction kit •Overall length: 238mm, overall width: 103mm, overall height: 93mm •Precisely replicated balloon tire equipped Kubelwagen Type 82 - Africa version Instrument panel, seats and 4-wheel independent suspension system are also reproduced realistically. •All the doors and engine room cover can be modeled in either open or closed position. •The engine room shows mechanical equipment including air cleaner, 4 cylinder horizontally opposed air cooled engine and repair tools •Balloon tires are of semi-pneumatic rubber and front wheels are steerable. •Includes accessories such as jerry cans and canteen for drinking water, Rommel figure and a driver figure.
€99.99
incl. VAT plus P&P

Land Rover Defender 90 (CC-01)

Article number: 300058657 Product: Land Rover Defender 90 (CC-01) Another big name joins the world of Tamiya R/C: the Land Rover Defender is an enduring vehicle that traces its lineage back to the original Land Rover cars first released in the immediate post-WWII era. This model recreates an early version of the Defender 90 (so named on account of its wheelbase length), the shorter wheelbase variant of the car. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 457mm, width: 200mm, height: 214mm, wheelbase: 242mm. • The classic Defender 90 form is accurately captured by the polycarbonate body, with slide molding used for great detail such as rear panel surfaces. • Includes separately molded parts for grille, side mirrors, light cases and tire cover. • Compatible with 5mm-diameter LEDs (White) x2 for headlights and 5mm-diameter LEDs x6 for the rear. • Matte plated wheels are paired with realistic tires featuring authentic tread pattern. • Highly reliable CC-01 chassis features a full-time 4WD system and front double wishbone, rear 4-link rigid suspension equipped with 4 CVA oil dampers. • An expansive range of option parts is available to customize the CC-01 chassis.   Warning! Not suitable for children under 14 years.
€249.99
incl. VAT plus P&P

Leclerc Series 2

Article number: 300035362 Product: Leclerc Series 2 • This is a 1/35 scale plastic model assembly kit. Length: 306mm. • Road wheels now come as molded plastic components. Please note that other parts are features remain the same as on Item 35279, except for slightly updated instructions and package. • The Leclerc is captured with exceptional detail, including Series 2 specific smoke dischargers, stowage boxes, short and long snorkels, and air conditioning unit. • French developed 120mm smoothbore gun with thermal sleeve is accurately reproduced. • Clear parts recreate headlights, taillights and periscope lenses. • Rear hull includes finely detailed engine grille and surface imperfections reproducing the non-slip finish of the actual tank. Other details include tow cable, external fuel tank, fuel tank pipe stay and fuel tank stays. • Commander's post features rotating sight and a commander figure. • Features 4 marking options, three in the 3-color NATO camouflage, and one in desert colors. See next page. • Compatible with Item 35280, a dedicated photo-etched parts set for the Tamiya 1/35 Leclerc Series 2. With 4 marking options included (these are unchanged from those in Item 35279): Option A: 2nd Armored Brigade, 6th - 12th Cuirassier Regiment, 3/6 Squadron, France 2004 Option B: 2nd Armored Brigade, 6th - 12th Cuirassier Regiment, Rapid Reaction Platoon, France 2004 Option C: 2nd Armored Brigade, 6th - 12th Cuirassier Regiment, 1/12 Squadron, France 2004 Option D: Technical Section of the French Armée de Terre (Army), Qatar 1998   Warning! Not suitable for children under 14 years.
€58.99
incl. VAT plus P&P

Lunch Box Red Edition

Article number: 300047402 Product: Lunch Box Red Edition The Lunch Box is another classic name in the Tamiya catalog, and has appeared in many different editions down the years, all providing a truly fun big-tire drive! Now, this legend is given a release as a Red Edition, with the body and wheels co-ordinated in racy red. About the Model - This is a 1/12 scale R/C model assembly kit.   Length: 385mm, width: 290mm, height: 220mm. - The legendary Lunch Box body is molded in red styrene   for great realism. - Comes with jazzy red color plated wheels. - A new color variation of the classic stickers has white and   blue stripes to go perfectly in the red theme! - The durable and easy-to-assemble 2WD chassis features a   box type frame with front swing arm independent and rear rolling   rigid suspension setups. - A pre-assembled, sealed gearbox protects the diff gear from sand   and other intruding debris. - Features a rear wheelie bar for wild wheels-in-the-air driving.   Warning! Not suitable for children under 14 years.
€139.99
incl. VAT plus P&P

M-07 Concept Chassis Kit

Article number: 300058647 Product: M-07 Concept Chassis Kit This high-performance front-wheel drive R/C chassis assembly kit is constructed around a rigid monocoque with lower deck and upper frame sections. It offers responsive drive characteristics and fuss-free maintenance of parts such as the easy-access differential, which can be removed from the underside with minimal disassembly. C.V.A. (Constant Volume Adjustable) oil shock-damped 4-wheel double wishbone suspension features dedicated long arms and steering linkage components for a range of setup options. A silky-smooth drivetrain utilizes full ball bearings, oil-filled gear differential unit and universal drive shafts. It can be assembled with a 225mm (M) or 239mm (L) wheelbase, making it compatible with appropriately-sized existing Tamiya M-chassis body parts sets.   Warning! Not suitable for children under 14 years.
€179.99
incl. VAT plus P&P

M-07R Chassis Kit

Article number: 300084436 Product: M-07R Chassis Kit This R/C FWD chassis kit takes the revolutionary M-07 Concept and pairs it with a range of option parts, selected by the Tamiya Racing Factory (TRF) team for a racing setup. This is a great value-for money option for those who want to get straight into racing, or achieve a race-spec car without having to select Hop-Up Option and Spare parts themselves. Featured Components - M-07 Concept High-Traction Lower Deck (54812) - TRF Special Damper (Hard Black Coating) (42102) - M-07 Concept Reinforced C Parts (Uprights) 2pcs. (54810) - M-07 Concept Reinforced D Parts (Suspension Arms) 2pcs. (54811) - 33mm Double Cardan Joint Shaft (2pcs.) (42312) - Clamp Type Aluminum Wheel Hub (5mm Thick) (53823) - Rear Stabilizer - Aluminum Cup Joint for TA06 Gear Differential Unit (2pcs.) (54532) - Hard Fluorine Coated 0.6 Aluminum Pinion Gear (20T) (53509) - φ2.6mm Titanium Coated Suspension Shaft Set for Reversible Suspension (53917) - 46mm Titanium Coated Suspension Shafts 2pcs. (53851) - 3x106mm Aluminum Turnbuckle Shaft (54756) About the Model - This is a 1/10 scale R/C chassis assembly kit. Length: 332mm. - Includes dedicated carbon fiber battery holders developed for this product. - The chassis has superb rigidity thanks to reinforced upright and suspension components, as well as a hightraction lower deck. - A highly efficient drivetrain employs 33mm double cardan joint shafts and aluminum joint cups, plus a durable fluorine coated aluminum 20T pinion gear. - Highly agile suspension utilizes TRF Special Dampers, rear stabilizer and titanium coated suspension shafts. - Also included are aluminum hex hubs and 3x106mm turnbuckle shaft.   Warning! Not suitable for children under 14 years.
€249.99
incl. VAT plus P&P

M-08 Chassis Kit

Article number: 300058669 Product: M-08 Chassis Kit The long-running and popular M-Chassis series welcomes a new member with the M-08 Concept chassis, which employs a midship motor, rear-wheel drive layout for superior rear traction, plus a main frame split into front and rear sections. About the Model • This is a 1/10 scale R/C model assembly kit. • The chassis is split into front (suspension and servo) and   rear (motor and battery) sections. It can be assembled into   three different wheelbases: S (210mm), M (225mm) or L (239mm). • Rear-midship motor powers rear wheels via a differential in the   MR setup. • Oil-filled differential gear is the TA06 design, which was also   employed on the M-07 Concept chassis. • Features proven M-07 Concept designs: suspension arms,   uprights, suspension mounts and aluminum parts. • Includes CVA oil dampers, universal drive shafts,   full ball bearings and hi-torque servo saver. • Comes with new front suspension mounts (0 degrees)   and hub carriers (2 degrees) for a total caster angle of   2 degrees, and smooth cornering. • Compatible with M-06 Chassis bodies. • Compatible with M-07 Concept Hop-Up Option parts such   as Aluminum Rear Suspension Mount (Skid Angle Adjustment)   (54787), Aluminum Rear Uprights (54781) and Low-Friction   King Pin Pipes (54813).   Warning! Not suitable for children under 14 years.
€189.99
incl. VAT plus P&P

Mazda MX-5 (M-05)

Article number: 300058624 Product: 1/10 Mazda MX-5 (M-05) This R/C assembly kit model recreates the 4th generation of the Mazda MX-5 (also known as the Roadster in Japan and the Miata MX-5 in the U.S.), the iconic car with a heritage dating back to 1989 and total sales in excess of 950,000. The dynamic and lightweight car was made to amplify the thrill of driving, with a punchy 1.5-liter (2.0-liter in North American market cars) inline 4-engine and 6-speed transmission, while including modern must-haves such as advanced safety equipment. The Tamiya R/C model faithfully captures the fun and maneuverability of the real life subject as it comes on the proven M-05 M-chassis platform. The M-05 is a simple to build FWD (front wheel drive) machine, which allows for plenty of after-market parts to be outfitted as you grow with your skill. The lightweight, narrow semi-monocoque frame offers an optimized weight distribution and a low center of gravity. A ground-hugging 4-wheel independent double wishbone suspension and a 3-piece steering linkage ensure excellent stability during high-speed cornering. Three wheelbase lengths (210mm, 225mm, 239mm) are possible by simply switching the position of the rear suspension parts, enabling a wide range of body choices available from Tamiya. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.
€129.99
incl. VAT plus P&P

Mercedes-AMG GT3 (TT-02)

Article number: 300058639 Product: Mercedes-AMG GT3 (TT-02)  Tamiya continue to expand our range of kits on the entry level TT-02 with this stunning new release. It depicts the fabulous body of the Mercedes-AMG GT3 car, which was created for the GT3 class of racing from 2016 onwards. The 6.3-liter V8 powered car has quickly become a modern legend with race results like a clean sweep of the top 4 in a 2016 Nürburgring 24-hour race.  About the Model • This is a 1/10 scale R/C model assembly kit. Length: 453mm. • The luxurious, powerful form of the Mercedes-AMG GT3 is recreated in polycarbonate. • Separately molded parts are included in the kit to recreate side mirrors and the distinctive rear wing. • PS-63 Bright Gun Metal (Item 86063) is a new Tamiya Color spray for polycarbonate, formulated especially for this model. It recreates the standard works color (requires a coat of PS-55 Flat Clear on outside of body). • The beginner-friendly yet highly adaptable TT-02 is a versatile and easy-to-maintain chassis. • Comes with the 12-spoke wheels used in Item 58619. • Stickers are included to recreate the markings of the car, as are masking stickers for use when painting. • An extensive TT-02 option parts line-up offers a number of opportunities to tune your car. • Please note that R/C equipment and battery pack are separately required.   Warning! Not suitable for children under 14 years.
€144.99
incl. VAT plus P&P

Mercedes-Benz G 500 (CC-02)

Article number: 300058675 Product: Mercedes-Benz G 500 (CC-02) Get ready for a newcomer to the Tamiya off-road chassis line-up – the CC-02 is here! Even better, its first model comes with a brand new body that depicts the Mercedes-Benz G 500, a 2018 addition to the German auto giant's legendary G Class that was powered by a 4-liter V8 twin turbo engine. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 455mm, width: 196mm, height: 207mm. Wheelbase: 267mm. • TLU-01 LED Light Unit and LEDs are included for export only! LED attachment parts are also included. • The boxy form of the G 500 is recreated accurately in polycarbonate, with separately molded parts included for the front grille, side mirrors and spare tire cover. • Designed for a wide range of off-road scenes including rocky terrain, the CC-02 chassis’ ladder frame is inspired by full-size vehicles and is the base for its superior durability. • A 4WD setup employs the motor longitudinally behind the front axle, with separated gearbox and transfer case, and propeller shafts transmitting power to the differential gears front and rear. • Twenty gear ratios between 11.09:1 and 29.28:1 are possible using separately sold pinion gears, for some serious fine-tuning! • 4-link rigid suspension is employed front and rear, with CVA oil dampers. See over the page for a more detailed introduction to the CC-02!   Warning! Not suitable for children under 14 years.
€269.99
incl. VAT plus P&P

Mesozoic Creatures

Article number: 300060107 Product: Mesozoic Creatures Not everything which lived during the age of the dinosaurs was a massive sauropod. This assembly kit set depicts a variety of smaller dinosaurs such as adolescent Parasaurolophus and Tyrannosaurus as well as Oviraptor and Hypsilophodon. A crocodile as well as an example of an ancestor to today's birds are also included. Use them to populate your dinosaur dioramas.
€13.99
incl. VAT plus P&P

Messerschmitt Bf109E-3

Article number: 300060750 Product 1:72 Messerschmitt Bf109E-3 Without a doubt, the Messerschmitt Bf109 can be clamed as the most famous and successful German aircraft from the WW2. It was the world´s most advanced fighter at that time of its debut in 1936, and remained as the standard fighter for the Luftwaffe throughout the conflict. Created by the brilliant designer Willi Messerschmitt, it had the smallest possible air frame built around the most powerful engine available. It also boasted many of the then innovated features such as an all metal stressed skin construction, retractable main landing gear. Automatic Handley-Page leading edge slats, etc. The Bf109 saw the first combat during the Spanish Civil War and fully demonstrated it exceptional maneuverability, inherited from its precedent Bf108 Taifun (Typhoon) multi-purpose sports plane. The Bf109 underwent numerous improvements throughout its carrier, and mass production of the E variant started late in 1939. Within one year, about 2,000 "E" aircraft were rolled out. Its excellent performance greatly contributed in the active service of German pilots at the Western Front and during the "Battle of Britain". The E-3 version used and improved Daimler-Benz DB601Aa engine capable of 1,100 h.p. output. This engine had provision for mounting a 20mm MG FF cannon on the crankcase and firing through propeller hub. The Messerschmitt Bf109E was one of the best fighters of the early WW2 period, on a par with the British Spitfire. Detailed Plastic Kit of model Messerschmitt Bf109E-3 in scale 1:72
€14.99
incl. VAT plus P&P
Shipping Information

If you put these articles in your shopping cart, the shipping address of your order is restricted to the following countries:

to the top