This website uses cookies. By using the services of this website you consent to the usage of cookies.
OK
Tamiya CarsonMajoretteDickie ToysSchuco 

1:48 RAF De Havilland Mosquito Mk.6

Article number: 300061062 Product: 1:48 RAF De Havilland Mosquito Mk.6 Nicknamed "The Wooden Wonder" due to its nearly all-wood construction, the de Havilland Mosquito was initially conceived as a fast, unarmed bomber and went on to serve in that and many other roles during WWII. This kit depicts the NF Mk.II nightfighter and FB Mk.VI fighter-bomber variants which were introduced in Spring 1942 and Spring 1943 respectively. Parts are included for the NF Mk.II's nose- and wing-mounted radar antenna as well as 500lb bombs and rockets for the FB Mk.VI. The bomb bay may be fitted with bombs and also features details for the fuel tank and 20mm cannon magazines. Two pilot figures and three marking options are included.   Warning! Not suitable for children under 14 years.
€28.49
incl. VAT plus P&P

1:48 Sd.Kfz 232

Article number: 300032561 Product: 1:48 Sd.Kfz 232 During the first half of WWII, German reconnaissance units greatly used the Sd.Kfz.231 series heavy armored car. Above all, the Sd.Kfz.232 was equipped with a Fu.11 radio and featured a large frame-type antenna mounted on the body. It also came armed with a KwK30 20mm cannon and an MG34 machine gun mounted on its turret. The 8-wheeled Sd.Kfz.232 had an on-road top speed of 90km/h, featured elaborate front and rear driving positions, and a superb 8-wheel drive system. These 8-wheeled armored cars were deployed to armored reconnaissance battalions of Panzer divisions and served as the eyes of the German army from Europe and North Africa to the Russian front. The Tamiya 1/48 scale model kit carefully captures all the fine detail of the full size subject. This subject was only previously available in 1/35 scale and it's now part of the Tamiya 1/48 scale model collection.
€29.99
incl. VAT plus P&P

1:48 US Vought F4U-1A Corsair

Article number: 300061070 Product: 1:48 US Vought F4U-1A Corsair About the Vought F4U-1A Corsair After enduring heavy losses to the Japanese Navy's Zero fighters in the early stages of the Pacific War, the U.S. Navy became focused on developing new fighters capable of turning the tides of aerial combat. Among those fighters was the Corsair, first developed to be a high speed, carrier borne aircraft. Built around the new Pratt & Whitney R-2800 2000hp engine, and turning the largest propeller ever attached to a fighter plane (4m dia.), this gull-winged wonder was destined to be a success. In June 1942, the F4U-1 production models made their maiden flight. However, due to their restricted forward field of view, and because of a propeller wash effect caused them to stall left wing first during low speed landings, they first were used as land based fighters. Succeeding the F4U-1 in the summer of 1943 was the F4U-1A, which was equipped with an extended rear wheel landing gear shaft, a slightly modified glazed canopy, and a small triangular strip of metal bolted to the right leading edge of the wing to equalize the stall and avoid the roll to the left at touch-down. Despite these improvements, the new F6F Hell Cat was adopted as the main carrier-borne aircraft, and the first combat Corsairs became relegated to land based US Marine squadrons in the South Pacific. Major Boyington and 2nd Lieutenant Hanson of the U.S. Marines, Lt. Kepford of the Navy and other ace-pilots, bravely flew the F4U-1A into fierce air-combats, overpowering the Japanese Zero fighters with tremendous top speed and six 12.7mm heavy machine guns.   Warning! Not suitable for children under 14 years.
€27.49
incl. VAT plus P&P

1:48 US WWII 2.5to 6x6 Airf. Fuel Tr.(2)

Article number: 300032579 Product: 1:48 US WWII 2.5to 6x6 Airf. Fuel Tr.(2) The model US Airfield Fuel Truck - 2 1/2 Ton 6x6 in 1/48 scale has a length of about 107 mm. What better subject to compliment your 1/48 scale diorama than this U.S. airfield fuel truck model. The model is a modification of Item 32548 US 2.5 Ton 6x6 Cargo Truck and depicts a fuel truck typical of those that would have served during WWII.
€26.99
incl. VAT plus P&P

1:48 WWII Brit. Armo. scout car Dingo II

Article number: 300032581 Product: 1:48 Brit. Armo. scout car Dingo II This British armored scout car boasted enviable maneuverability and armor up to 30mm thick on its compact hull. Often referred to by its nickname of "Dingo", delivery of the Mk.I variant began in 1939; the later Mk.II featured various modifications, including an overhaul of the steering system. All told, more than 6,600 "Dingoes" were manufactured until 1945, serving in a range of locations in both reconnaissance and command car roles. About the Model This is a 1/48 scale plastic model assembly kit of the "Dingo" Mk.II. - Length: 69mm, width: 37mm. - The lightweight and compact form with distinctive flat panels is authentically recreated. - The model can be assembled with folding roof in open or closed position. - Suspension is realistically depicted with intuitive parts makeup. - Commander and driver figure are included in realistic action pose. - Contains one set of markings to recreate a vehicle in combat in Europe.   Warning! Not suitable for children under 14 years.
€15.89
incl. VAT plus P&P

1:48 WWII Brit. Small Staff Car 10HP

Article number: 30003262 Product: 1/48 WWII Brit. Small Staff Car 10HP Tilly was the name given to British Small Staff Cars coming from the word "Utility". These Tilly vehicles were produced in large numbers for British and Allied forces during WWII from civilian car designs. They were severely underpowered, but served with distinction and stayed in production throughout WWII and could be seen on every front. This British Staff Car was powered by a four cylinder 22-kW engine derived from a 10 HP commercial saloon.
€17.99
incl. VAT plus P&P

1:48 WWII Citroen CV11 Staff Car

Article number: 300032517 Product: 1/48 WWII Citroen CV11 Staff Car Introducing the 1/48 scale Citroen 11CV, an all-new model developed specially for the 1/48 series. Originally a civilian sedan that was used by both French and German militaries during WWII, the 11CV model opens up new possibilities in the world of 1/48 military modeling, and bridges the gap between military, airplane and automobile model fans. About the Citroen 11CV This famous French sedan was produced from 1934 to 1957, its nickname in French is Traction Avant meaning front-wheel drive. Indeed, the innovative 11CV was one of the pioneers of front-wheel drive. Its versatility led to it being adapted for military use in great numbers, with the French, Free French and German occupying armies all employing 11CV cars. Germany deployed 11CVs to theaters all around Europe, including France, Italy and the Russian Front. German pilots often used the Citroen 11CV as their private car About the Model 1/48 scale model of the Citroen 11CV impressively reproduces the cars elegant curves. Underside of chassis features accurate detailing. The versatile Citroen 11CV served in a variety of military purposes, making it perfect for lining with 1/48 MM Series tanks or 1/48 scale airplanes. Also makes a wonderful setpiece for military dioramas. Car modelers will enjoy building the civilian model Citroen 11CV. Decals offer choice of 3 types of markings depicting French & German military versions.
€17.99
incl. VAT plus P&P

1:48 WWII Diorama-Set Field Maintenace

Article number: 300032547 Product: Tank Crew Field Maintenance Set Tamiya provides more 1/48 scale diorama options for military modellers everywhere with the release of this extensive figure and accessory set. Match them with any of our large lineup of 1/ 48 MM German vehicles to add more life to your display. About the Model High quality 1/48 scale German army figure and accessory set. Set includes 9 figures doing various tasks in realistic standing and kneeling poses. Ammunition loading - 4 figures Tire repair - 1 figure Engine maintenance - 2 figures Painting - 1 figure Supervisor - 1 figure Large selection of accurately reproduced accessories and tools included. 88mm ammunition for King Tiger (x2) Wooden case for 88mm ammunition for King Tiger (x2) 88mm ammunition for Tiger I (x4) Wooden case for 88mm ammunition for Tiger I (x2) 75mm ammunition for Panther (x2) Wooden case for 75mm ammunition for Panther (x2) 75mm ammunition for Pz.kpfw.IV (x4) Wooden case for 75mm ammunition for Pz.kpfw.IV (x2) Oil drum (x2) 1 each of the following accessories: Tool Kit, Ladder, Burner, Tool Bag, Wooden Crate, Hammer, Bucket, Jack Crank, Jack, Anvil, Vise, Open Tool Box, Closed Tool Box, Oil Siphon, 18 Liter Can
€17.99
incl. VAT plus P&P

1:48 WWII Dt. F.W. Fw190 F-8/9 m.Belad.

Article number: 300061104 Product: 1:48 WWII Dt. F.W. Fw190 F-8/9 m.Belad. In the latter half of WWII, the Luftwaffe Focke-Wulf Fw190 F series were the main aircraft used for air-to-ground assaults. The F-8, which entered the fray from the spring of 1944, was based on the A-8 aircraft and had the largest production numbers among the F series variants. The F-9 which had a superior engine output was also soon put into action. Both Fw190 F-8 and F-9 aircraft fought hard against the ever increasing numbers of Allied fighters up until the end of the war.
€39.99
incl. VAT plus P&P

1:48 WWII Dt. Fieseler FIL156C Storch

Article number: 300061100 Product: 1/48 WWII Dt. Fieseler FIL156C Storch About the Fi 156 Storch Produced to meet a Luftwaffe requirement for a new liaison aircraft, the Fi 156 Storch was a light aircraft that had amazing STOL (Short Take-Off and Landing) capabilities. The design incorporated such practical features as folding wings, which allowed it to be easily transported, and landing gear shock absorbers that allowed it to land on rough surfaces. It was used in a variety of roles, including liaison, tactical reconnaissance, and air ambulance, and it was the aircraft that was involved in the daring rescue of Italian dictator Benito Mussolini. Field Marshal Erwin Rommel was also known to make heavy use of his Fi 156 for battlefield reconnaissance in North Africa. About the Model •Highly-detailed 1/48 scale assembly kit model of the Fieseler Fi 156 Storch. •Kit includes parts to replicate various versions of the Fi 156C, including fuel tank, skis, and 3 different types of canopies. •Clear canopy sides have been molded together with the fuselage halves for more realistic construction. •Important structural sections such as the wing spar and the landing gear struts are made from metal parts for enhanced realism and strength. •Includes 1 pilot and 1 commander figure. •Precision photo-etched parts such as cockpit panels, cockpit frame, and front seat also included.   Warning! Not suitable for children under 14 years.
€77.99
incl. VAT plus P&P

1:48 WWII Dt. SdKfz.67 (6) w/ 3.7cm PAK

Article number: 300032580 Product: 1/48 WWII Dt. SdKfz.67 (6) mit 3,7cm PAK In the lead-up to WWII, Germany started to transform civilian vehicles into military ones, and one of the subjects was a light 6-wheel truck which was mass-produced starting in 1933. This 1936 evolution of the truck had a 60hp flat four square cylinder engine that mustered 55hp and provided up to 70km/h. The truck was used for transporting personnel and light artillery, and it utilized 6x4 independent suspension with rear 4-wheel drive. The first mass-produced variant was the Kfz.69, which was designed to tow a 3.7cm Pak 35/36 anti-tank gun and carried a driver and 5-artillery crew. It was employed as standard equipment in anti-tank artillery divisions and was seen in action in locations such as France, Poland, the Balkans, and Russia. The Tamiya model faithfully captures all of the details of the full-size subject thanks to extensive research of surviving samples left over from the war. Scale: 1/35 Length: 182 mm
€25.99
incl. VAT plus P&P

1:48 WWII Figure-Set Ger.Inf.Maneuv.(15)

Article number: 300032530 Product: 1/48 WWII Figure-Set Ger.Inf.Maneuv.(15) Our latest 1/48 scale figure set features WWII German soldiers in relaxed poses, standing, walking, wearing field caps and with weapons shouldered. Also includes figures depicting tank crew at rest. 2 all-new officer figures and military policeman, which are available now for the first time in any scale, are also included. This set is perfect for modeling non-combat scenes and dioramas of life behind-the-lines. Set includes 7 machine gun crew on maneuvers, 2 standing infantry, 3 tank crew, 2 officers and 1 military policeman for a total of 15 figures. Infantry figures feature realistic M43 field uniforms. Includes separately molded weapons and equipment such as machine gun tripod mount.
€11.79
incl. VAT plus P&P

1:48 WWII Figure-Set Ger.Pz.Grenadi.(15)

Article number: 300032514 Product: 1/48 WWII Figure-Set Ger.Pz.Grenadi.(15) German Figures Set Part 2 Adding a 3rd figure set to our popular 1/48 MM Series, this selection features Late WWII German Panzer Grenadiers together with tank crewmen and a driver and officer figure specially designed for displaying with 1/48 scale light vehicles such as the Schwimmwagen. About the Uniforms The German army in WWII is known for employing a wide variety of advanced and creative camouflage uniforms. One example is the reversible camouflage smock which featured a spring pattern on one side, and fall pattern on the other. The M44 fatigues issued from spring 1944 featured pea pattern camouflage of green, gray, brown and black spots on a neutral background. German troops such as Panzer grenadiers used this uniform, together with a variety of camouflage smocks, in the latter part of the war. Armored crews initially wore black fatigues, but began using camouflage uniforms from the middle of the war. While some units favored black leather jackets, the hooded combat jacket issued in 1942 was used widely until the closing days of WWII.
€15.89
incl. VAT plus P&P

1:48 WWII Ger. Kettenkrad m. Goliath

Article number: 300032502 Product: 1/48 WWII Ger. Kettenkrad m. Goliath Following the release of the Kubelwagen as the first model in the 1/48 scale Military Miniature Vehicle (MMV) series, Tamiya introduces the second amazing release, the Kettenkfraftrad. This is a fabulous complete display kit featuring Kettenkfraftrad with an infantry cart, a demolition vehicle and many other great accessories on a tiny 1/48 scale. Model can be enjoyed by itself or combined with one of our fantastic 1/48 scale aircraft for a diorama display. About the Kettenkraftrad (Infantry Cart & Goliath Demolition Vehicle) Kettenkraftrad: Featuring three forward and one reverse gear the Kettenkraftrad was used as a transportation vehicle, a power generator, a communications vehicle, towing vehicle etc. Capable of towing up to 4 tons it was widely used to tow artillery and equipment, as well as aircraft when used by the Luftwaffe. Infantry Cart: A lightweight cart that could be easily towed by just two men, a horse, a motorcycle or a Kettenkraftrad. The infantry cart was used all throughout WWII, displaying superior versatility and practicality. Goliath: The Goliath was a remote control operated self-detonation vehicle. An 800m-long cable enabled remote control access to far away targets and remote detonation of its 60kg load of explosives. About the Model 1/48 scale high quality plastic model of the Kettenkraftrad as used during WWII Overall length of Kettenkraftrad: 64mm Set includes accurately detailed Goliath demolition vehicle and infantry cart Includes loads of accessories such as two types of grenade launchers, fuel drum, jerrycans, ammunition boxes, rifles and 1 uniformed driver figure 5 sets of markings to reproduce both the Germany army or Luftwaffe vehicles.
€17.49
incl. VAT plus P&P

1:48 WWII Ger.H.Tank Jagdtiger Early Pr.

Article number: 30003269 Product: 1/48 WWII Ger.H.Tank Jagdtiger Early Pr. 1943 saw the production of the worlds heaviest and most powerful tank of its time, the Jagdtiger. Pro-duced by Henschel, it was based on the King Tiger's chassis and featured a long barreled 12.8cm gun which showed great offensive capabilities being able to knock out Allied tanks from a great distances. Along with its new design, the large sized fixed fighting compartment was given a 250mm thick front defensive armament which was unique to this tank. First appearing at the Ardennes offensive in December 1944, the Jagdtiger mostly fought against Allied forces in Western Germany from January 1945. Up until April 1945, more than 80 Jagdtigers and another ten with "Porsche turrets" were produced.
€33.99
incl. VAT plus P&P

1:48 WWII Ger.Kübelw.Typ82 Pkw.K1 Afrika

Article number: 300032503 Product: 1:48 Dt. Kübelw.Typ82 Pkw.K1 Afrika One of the most widely used WWII vehicles, the Kübelwagen Type 82 featured a lightweight monocoque body, four wheel independent torsion bar suspension and a 23.5hp air-cooled 4 cylinder 985cc engine. Based on Dr. Ferdinand Porsche's Volkswagen, the Type 82 possessed excellent maneuverability and handling, serving as a multi-purpose vehicle for the army as well as the Luftwaffe (air force). In total over 50,000 units were produced during WWII, with slight variations between models including shape of rear fender, under guard, turn signals and exhaust layout. The Kübelwagen was first deployed to the North Africa campaign in 1941, with a specialised Africa Corps version featuring balloon tires going into production from 1942. Designed to be more suited to desert conditions, the Africa Corps model was used during both the North Africa and Italian campaigns. Overall length: 79.5mm, overall width: 33.5mm Bonnet, short fender, balloon tires and other distinctive characteristics of the Africa-Corps Kübelwagen have all been authentically reproduced 1 driver and 1 pilot figure wearing shorts and rolled sleeve shirt included Decals for 5 different markings Perfect for diorama with German aircraft from the 1/48 Aircraft Series such as the Messerschmitt Bf109E-4/7 Trop
€12.99
incl. VAT plus P&P

1:48 WWII Ger.Kübelwagen Typ 82 Pkw.K1

Article number: 300032501 Product: 1/48 WWII Ger.Kübelwagen Typ 82 Pkw.K1 Tamiya now introduces the first item in the 1/48 Military Miniature Vehicle Series: The Kubelwagen Type 82. This very popular vehicle was not only employed by the Wehrmacht but also by the Luftwaffe. This vehicle is perfect for people who want to create realistic dioramas. Set includes 2 figures. Front doors come as separate parts and can be attached in opened or closed position. About the German Kubelwagen Type 82 In February 1936, Dr. Ferdinand Porsche presented his first prototype of the "People's Car", which was to be the base of the Volkswagen "Beetle". However, with the outbreak of WWII, all manufacture of the Volkswagen was immediately turned to military production. In January 1938, German Defense Forces presented specifications for a military version of this practical vehicle. In November of that same year, a prototype was completed and it was officially designated Pkw. K1 "Kubelwagen" Type 82. The vehicle used a light but sturdy monocoque construction with foldable canvas top. With its reliable engine and heavy duty suspension, the Kubelwagen immediately came to be used by every unit, from the scorching desert of Africa to the frozen Russian Eastern Front. About 51,000 Kubelwagens, including several variations, were rolled out from the factory by the end of WWII.
€17.99
incl. VAT plus P&P

1:48 WWII Ger.Sd.Kfz.181 Tiger I Ausf.E

Article number: 300032504 Product: 1/48 WWII Ger.Sd.Kfz.181 Tiger I Ausf.E Answering the requests from AFV fans all around the world, Tamiya is proud to introduce our first amazing tank to the 1/48 scale Military Miniature Series. And what tank could be more appropriate than the awesome Tiger I?! In a size that sits comfortably in the palm of your hand, this is a must have for all diorama fanatics and AFV collectors. For our first tank release there was no looking past the Tiger I. One of the most sophisticated and best engineered WWII tanks, the Tiger I saw action across all fronts and remains one of the most popular builds amongst AFV modelers. Lining this beautifully detailed model with other 1/48 scale WWII vehicles or aircraft and you will feel the true size and refined power of this amazing war machine. About the Tiger I Towards the middle of WWII, the Wehrmacht was hard pressed on two fronts, facing tough fighting against the superior Soviet T34 and KV-I tanks in the East, and retreating in the face of the Allied offensive in North Africa. But in late 1942, German units were assigned a powerful new war machine that far surpassed the Panzer III and Panzer IV tanks: the Tiger I. Equipped with the awesome 88mm main gun, 100mm thick armor at the front, 80mm armor on the sides, and a 650hp Maybach engine, the Tiger I is widely considered to be the most powerful and sophisticated tank of its time. Henschel produced over 1,300 Tiger I heavy tanks during the period of the war, ranging from initial production to modified late production models. The approximately 200 models produced from November 1942 to June 1943 are characterized as early production models. Distinctive features of early production Tiger I tanks include the large cylinder shaped cupola with a smoke discharger and pistol ports on the turret. The Tiger I first saw action against the Soviets near Leningrad, and went on to serve with distinction on the East
€34.49
incl. VAT plus P&P

1:48 WWII German Motorcycle&Sidecar (2)

Article number: 300032578 Product: 1/48 WWII German Motorcycle&Sidecar (2) Add some more detail to your 1/48 scale dioramas with this scale model of a German motorcycle and side car. Side cars were paired with motorcycles by German forces in many areas of the WWII conflict, and their excellent off-road ability combined with the bike’s engine power made them a useful asset in transporting soldiers and equipment, some even being mounted with machine guns.
€13.79
incl. VAT plus P&P

1:48 WWII Jp.Mitsub.A6M5/5a Zero Fighter

Article number: 300061103 Product: 1:48 WWII Jp.Mitsub.A6M5/5a Zero Fighter The Mitsubishi A6M Zero was the Japanese Navy’s main fighter throughout the course of WWII. In the latter half of the war, the Model 22 was refined to create the Model 52 to counter new U.S. aircraft such as the P-38 Lightning and F4U Corsair. It featured 50cm shorter wings with rounded wingtips, individual exhaust pipes and top speed of 565km/h. A6M5a was produced with a larger capacity (125 rounds) belt-type cannon ammunition system in February 1944. The Model 52 first saw action during the closing stages of the Solomons campaign in the autumn of 1943 and went on to fight in the skies above the Marianas, Iwo Jima, Okinawa, as well as Japan itself, until the end of the war. This is a 1/48 scale assembly plastic model of the Mitsubishi A6M5/5a Zero Fighter. ★Length=190mm, Width=229mm ★Zero fighter’s elongated proportions from nose to tail and the exquisite engine cowling are all accurately reproduced thanks to a complete measurement of the actual plane. ★Highly detailed cockpit and main landing gear well parts. ★Choice of an up or down flaps, as well as open or closed cowl flap. ★A6M5a with belt-type cannon ammunition system can be recreated. Differences from the A6M5 such as wing panels, spinner and wooden drop tank are highly detailed. ★3 types of markings are included. ★In addition to a sitting pilot figure, 4 different types of standing pilot figures are included.   Warning! Not suitable for children under 14 years.
€44.99
incl. VAT plus P&P

1:48 WWII US Re.P-47D Thunderb.Razorback

Article number: 300061086 Product: 1:48 US Re. P-47D Thunderb. Razorback In 1943, the 8th Air Force was launching raids on Germany with its B17 and B24 from England. The aim was to destroy German main production factories. Unfortunately, losses during theses missions were very heavy and it became urgent to develop a fighter able to escort the bombers over enemy soil. The limited ranges of the Spitfire and P-38 Lightning did not make these fighters able to go further than Paris, leaving the bombers alone to fend for themselves for the rest of the flight. With the development of the P-47, this problem was overcome. The P-47 was the first single-seated fighter to be equipped with a supercharger, allowing it to fly at the same high altitude as the bombers. This high-flying fighter was armed with eight 12.7mm machineguns that proved very useful in the intense fighting that occurred in the European skies. Equipped with drop tanks for longer range, the P-47D was then able to escort the bombers all the way to the German border. The Thunderbolt also allowed many Allied pilots to become Aces. Bomber crews plagued day after day by intensive German interceptions, would remark that the presence of the P-47 was of great help.   Warning! Not suitable for children under 14 years.
€45.99
incl. VAT plus P&P

1:48 WWII US Willys Jeep w/Fig.-Set (9)

Article number: 300032552 Product: 1/48 WWII US Willys Jeep w/Fig.-Set (9) Following the release of ITEM 32547 WWII German Tank Crew Field Maintenance Set, Tamiya is now planning another substantial figure and accessory set to add to our 1/48 MM lineup. This set will feature several U.S. infantry figures in life-like poses and an assortment of accessories that can be used to liven up any diorama.
€29.99
incl. VAT plus P&P

1:6 Honda CB750F 1979

Article number: 300016020 Product: 1/6 Honda CB750F 1979 This is a 1/6 scale plastic assembly kit model of the Honda CB750F, which quickly gained popularity after its release in 1979. ★The beautiful curved lines of the bike have been realistically reproduced. ★The air-cooled inline 4-cylinder 4-carburetor engine features detailed cooling fins and spark plug cables which are depicted with vinyl tubing. ★The metal front forks have a beautiful metal plated finish and coil springs that enable it to move. ★Exhausts also feature a smooth metal plated finish. ★In addition, side covers are removable to showcase the internal mechanisms even after assembly.
€99.99
incl. VAT plus P&P

1:6 Honda Gorilla Spring Collection

Article number: 300016031 Product: 1/6 Honda Gorilla Spring Collection About the Honda Gorilla Spring Collection In 1967, Honda Pioneered the field of "leisure motorcycles" with the release of the Monkey. The uniqueness of the Monkey made it an instant hit among the young and young at heart. In August 1978, Honda released the big brother of the Monkey and appropriately named it "Gorilla". Save the gas tank and seat, the Gorilla adopted fundamentally the same parts as the Monkey. The most defining aspect of the Gorilla is its swelled chest, an oversized gas tank, which boasts a capacity of 9 liters providing a 630km maximum running distance. Its powerplant was a 49cc air-cooled single cylinder SOHC engine, which was also used on Honda's best selling Super Cub. The Gorilla was also equipped with a manual 4-speed transmission, opposed to the automatic 3-speed system of the Monkey. Production was ceased in 1992 but the popularity of the machine, however did not dwindle, with the few remaining used Gorillas fetching premium prices. It was in February 1998 when Honda resumed production, this time bringing out a new Gorilla equipped with the Monkey's large headlamp and using chrome parts on the headlight casing, fender and other places. January 1999 saw the production of 3500 "Honda Gorilla Spring Collection" machines. This version was meant to shine, and features chrome parts on virtually every visible part of the bike. The gas tank, the side-cover, the front forks, the chain case, the wheels, the exhaust pipe cover, even the frame and swing arm glisten with gorgeous chrome. About the Model ★1/6 scale plastic assembly kit. Overall length: 226mm, width: 104mm, height: 183mm, ★Every characteristic of the 1998 version of the Honda Gorilla such as the larger headlamp, front fork, tank cap and emblems applied on the tank have been accurately replicated. ★Chrome-plated areas of the actual machine have been reproduced with metal-plated parts.   Warning! Not suitable for children under 14 years.
€61.99
incl. VAT plus P&P

1:6 Suzuki GSX1100S Katana 1980

Article number: 300016025 Product: 1:6 Suzuki GSX1100S Katana 1980 One of the most famous motorcycle shows in the world, is held every two years in Cologne West Germany, and the 1980 show is sure to stand out as one of the most unforgettable. One reason was that Honda released their CX500 turbo for the first time, and the second is that Suzuki"s GSX1100S "Katana" (Japanese for sword) was unveiled. The Honda CX500 attracted attention for its advanced engine techniques and the Katana for its advanced and aggressive body styling, which broke from common traditional motorcycle styling. Although the Katana GSX1100S styling impressed the many thousands of viewers, almost everybody thought that it was just for show and the production model would be quite different. During the summer of 1981, Suzuki released the production Katana with almost exactly the same body styling seen at the Cologne show, with subtle improvements in the engine and running gear. The body styling is from the genius of Mr. Hans A. Muth of West Germany, who spent much time ensuring driver comfort in his design, and which proved out in many wind tunnel tests. The entire styling was derived from research on the best drivers position, and the rearward placed backsteps and unique tank styling were not done just for the pleasing jet age appearance. Large capacity fuel tank and small fairing were blended together for the best airflow around the rider and the bike. Although the bike is most noticable for its styling, every part in it is quality. Engine is an air-cooled, parallel 4 of 1075cc, using 16 valves. With the unique Suzuki TSCC (Twin Swirl Combustion Chamber) in the engine, it puts out 111 hp. This tremendous power transmits into a road speed of 230 k/h and its unique body styling deeps it stable even at these high speeds. Suzuki is shipping a 1000cc Katana GSX1000S tot he American market, and also a 750cc version to the European market as well. Requests from Japanese enthusiasts prompted Suzuki to also market a 750cc Katana GSX750S to their market  
€99.99
incl. VAT plus P&P

1:72 F-16CJ w/FULL EQUIPMENT

Article number: 300060788 Product: 1/72 F-16CJ w/FULL EQUIPMENT This is the second release of the 1/72 scale F-16CJ [Block 50] Fighting Falcon (original Tamiya release: Item 60786) now with parts depicting underside equipment used on the aircraft! The versatile F-16 Fighting Falcon's adaptability to both air-to-air and air-to-ground missions makes it one of the cornerstones of the U.S. Air Force today. Block 50 evolutions of the aircraft were deployed from 1991, F-16CJ fighters being fitted with radar countermeasures. The aircraft's capabilities were extended yet further via the CCIP program, which gave night fighter functionality and more. Equipment depicted using new parts Centerline fuel tank Wing underside fuel tanks ECM counter measures pod AGM-88 HARM missiles AN/ASQ-213 HTS targeting pod AIM-120 AMRAAM missiles AIM-9M & -9X Sidewinder missiles AN/AAQ-33 Sniper XR pod   Warning! Not suitable for children under 14 years.
€40.49
incl. VAT plus P&P

1:72 ME-BF 109E-4/7 TRUP

Article number: 300060755 Product: 1:72 ME-BF 109E-4/7 TRUP During the first half of the Second World War, the Messerschmitt Bf109 E was the main fighter of the German airforce. The E-4 housed a 1,100hp Daimler Benz DB 601Aa engine and was armed with two 7.92mm machine guns on the nose, as well as a 20mm cannon on each wing. For some aircraft, bullet-proof glass was used to reinforce the front of the canopy. In addition, a 20mm canon, which ran through a tube in the propeller was supposed to be installed but was unsuccessful. Displaying superb acceleration and diving ability, the E-type planes overpowered the RAF's Hawker hurricane and equaled the Spitfire fighters in the Battle of Britain. However, with a flight range of only 560km, the E-4 planes were limited to just fifteen minutes of combat over British skies. Thus, the bombers were not given sufficient support and sustained heavy damage. As a result, the Luftwaffe's strategy to bomb England into surrender ended in failure. To deal with this drawback, the E-4 planes were equipped with additional 300L fuel tank. These improved fighters, called E-7, were first deployed at the end of 1940. After the Battle of Britain, the E-4/7 planes were sent to the front lines of Northern Africa. As the Bf109 F-type fighter's production was advanced, the E-4/7 was retired from the front lines. However, some veteran pilots continued to use the E-4/7 mainly for ground support duty until the summer of 1942. Bf109E-4/7 TROP
€15.89
incl. VAT plus P&P

1:72 US F-16CJ Fighting Falcon

Article number: 300060786 Product: 1:72 US F-16CJ Fighting Falcon The Lockheed Martin F-16 Fighting Falcon is a single-engine multirole fighter aircraft originally developed by General Dynamics for the United States Air Force (USAF). It was designed as an air superiority day fighter and later it evolved into a successful all-weather multirole aircraft. As of 2012, over 4,500 aircraft have been built since production was approved in 1976. In 2004 and in 2008 Tamiya’s model designers captured this iconic fighter in 1/48 scale and in 1/32 scale respectively, which both models received tremendous accolades from the modeling community and the industry press. The third release continues Tamiya’s tradition of excellence with this 1/72 cale model. This version is specifically of the F-16CJ (Block50) and it shares some of the same level of details as its larger counterparts. It is the perfect scale model for modelers confined to smaller display areas to show off their hard modeling work.
€27.99
incl. VAT plus P&P

1:72 WWII Mitsubishi A6M5 Zero Fighter

Article number: 300060779 Product: 1/72 WWII Mitsubishi A6M5 Zero Fighter This is the definitive 1/72 plastic model of the Japanese Navy's representative fighter aircraft, the Mitsubishi A6M5 Zero Fighter. History of the Zero fighter: The Mitsubishi A6M Zero was the Japanese Navy's main fighter throughout the Pacific Theater during WWII. In the latter half of the war, the model 52 Zero, a refined version of the model 22, aimed to take on the ever increasing numbers of high-performance U.S. aircraft. It featured a shorter 11m wingspan with rounded wingtips, was powered by the same 1130hp Nakajima "Sakae" engine as seen in the model 22 Zero, and had the new exhaust propulsion system which gave it a 565km/h top speed. The A6M5 came armed with two 7.7mm machine guns and 20mm belt-fed cannons. Deployment of the A6M5 began in the autumn of 1943, and they saw action in the Solomons campaign as well as over the Marianas. It defended Japan against overwhelming numbers of superior U.S. aircraft up until the very last day of the war.
€21.99
incl. VAT plus P&P

Actros 3363 (Pearl Blue)

Article number: 300056354 Product: Actros 3363 (Pearl Blue) This is a special edition of the Mercedes-Benz Actros 3363. It features pre-painted Body parts in Pearl Blue (Tamiya Color TS-89) for a cool look, with a durable coating applied to protect the paintwork from damage.  About the Mercedes-Benz Actros 3363 6x4 GigaSpace  This is a highly accurate 1/14 scale radio control model that recreates the Mercedes Benz Actros 3363 3-axle truck. The Actros series debuted in 2011 and was named 2012 Truck of the Year. Powered by a 15.6-liter inline-6 turbocharged diesel putting out a max of 630hp, the actual 3363 can haul up to 250 tons!  The Tamiya rendition faithfully captures the truck's modern form with the use of ABS plastic body parts and a number of metal chassis components. One look at the detailed interior and auxiliary equipment, such as air tanks, will confirm that the body features replica-quality realism, which is further enhanced with metal transfers depicting emblems and numerous metal-plated parts. The chassis is built for durability as it uses aluminum side channels with resin cross members. Drivability is accomplished by power from the front-mounted motor and is transmitted via a propeller shaft to the rear axle; built-in differential gears guarantee smooth cornering. Gear changes can be made via a separately-sold 4-channel transmitter.  The Actros' realism can be further heightened with separately-available trailers that can be attached to its coupler and make the model over a meter in length!      Warning! Not suitable for children under 14 years.
€519.99
incl. VAT plus P&P

Avante (2011) Black SP

Article number: 300047390 Product: Avante (2011) Black SP Tamiya is delighted to announce the re-issue of this special version of the Avante (2011), which was originally released to commemorate the 35th anniversary of Tamiya R/C car products. It sports a color scheme inspired by its Mini 4WD cousin the Avante Black Special. About the Model • Original Item No.: 84270 • This is a 1/10 scale R/C shaft-driven 4WD buggy assembly kit. Length: 420mm, width: 240mm, height: 140mm. Wheelbase: 260mm. • Carbon-fiber parts such as 2mm thickness upper & lower decks, plus rear damper stay offer superb strength. • Includes Avante (2011) Racing Steering Set, with a 2mm thickness carbon fiber steering plate and 850 ball bearings giving silky smooth motion. • Includes Avante (2011) Torque Splitter Set, with torque splitter and ball differentials for sure-footed traction. • 4-wheel double wishbone suspension has metal shafts for great customizability. • Aluminum front uprights are the same design as on the original Avante, and offer great strength and rigidity. • Spike tires are mounted on fluorescent pink wheels. • Comes with a 25T motor featuring a special label applied.   Warning! Not suitable for children under 14 years.
€549.99
incl. VAT plus P&P

Cable 1mm OD Bla

Article number: 300012678 Product: 1:6/1:12/1:24 1,00mm Kabel/Schlauch 2m This cable features a wire core in vinyl casing. It’s great for reproducing the various piping and cables which appear on Tamiya's highly realistic scale car and motorcycle models. The wire core ensures greater flexibility and durability than standard hollow tubing in Tamiya model kits. • Length: 2 meters. • Please note that using these cables will require the making of holes in the subject model. .
€3.99
incl. VAT plus P&P

Chasmosaurus Diorama

Article number: 300060101 Product: Chasmosaurus Diorama Length: (Adult) 168mm, (Young) 68mm. This assembly kit model recreates the herbivorous dinosaur Chasmosaurus, which lived in what is now North America during the Cretaceous period about 75 to 80 million years ago. Its shape and texture of its skin was reproduced based on the latest available research. Two different front left and rear right legs are included to enable different poses. The adult and young Chamosaurs may be conveniently displayed on the included diorama base and the set also comes with a same-scale human figure for size comparison.
€20.99
incl. VAT plus P&P

De Havilland Mosquito FB Mk.VI

Article number: 300060747 Product: De Havilland Mosquito FB Mk.VI The De Havilland "Mosquito" made of wood was designed based on "high-speed bomber shaking off fighter". The design of the Mosquito was got in shape in 1939. The De Havilland had experienced producing "DH88 Comet" made of wood before, therefore they paid attention that the surface of wooden wing could be finished smoothly and the amount of aluminum could be saved. Two of Rolls Royce Merlin engines were selected as the source of power and the wood was used as the material of this fuselage. The parts with the metal were only the parts of the periphery of the engine and the landing gear. At the first time, the Air Ministry was passive adopting the Mosquito because of wooden and no machine guns. However the Mosquito made a maiden flight with the maximum speed of 630km when the "Spitfire" had the maximum speed of 580km at those time. Therefore a lot of "Mosquito" were suddenly requested. After many types of the Mosquito were produced, Night-Fighter Mk. II armed with 7.7mm machine guns on its nose and A.I.Mk.IV radar made an appearance. This Mosquito brought its ability into full play in attacking an airfield and intercepting raiding bombers. Also Fighting Bomber Mk. VI armed with four 225kg bombs and eight of rocket bombs was arranged as the actual fighting in Mar. 1943. This type played havoc with theland forces, the battleships and the U-boat. Furthermore it was active in attacking the railroad and its bridge at Burmese front line, giving a blow to Japanese army. The mosquito's wooden structure was strong against being shot, therefore it held an established position from the pilots with the special mission. Detailed Plastic Kit of model De Havilland Mosquito FB Mk.IV in scale 1:72
€21.49
incl. VAT plus P&P

Ford Mustang GT4 (TT-02)

Available from April 2019 Article number: 30058664 Product: Ford Mustang GT4 (TT-02) Inspired by the Ford Shelby GT350R-C, the Ford Mustang GT4 was designed to compete in GT4 category racing across the world. Powered by a 5.2-liter V8, and sporting a 6-speed sequential paddle shift transmission, Multimatic suspension and aerodynamically refined body, the Mustang GT4 cuts a thrilling figure. Now, it makes a triumphant entrance into the Tamiya range of R/C models. The TT-02 chassis is adaptable and fun to drive – a great choice to get started with R/C touring cars! About the Model • This is a 1/10 scale R/C model assembly kit. Length: 459mm. • The muscular form is captured in polycarbonate, and was designed with access to the actual car’s CAD data for superb accuracy. Front and rear light cases are also molded in polycarbonate. • Wheel arches are pre-cut out for a simpler body assembly experience. • The beginner-friendly, highly adaptable TT-02 is a versatile and easy to maintain shaft-driven 4WD chassis. • Separately molded plastic components depict rear wing and side mirrors. • Racy 10-spoke wheels are molded in gun metal and paired with slick tires. • Stickers are included to create an original livery, as are masking stickers for use when painting. • An extensive TT-02 option parts line-up offers a number of opportunities to tune your car.   Warning! Not suitable for children under 14 years.
€139.99
incl. VAT plus P&P

Grand Hauler (Matte Black)

Article number: 300056356 Product: Grand Hauler (Matte Black) This is a special edition of Item 56344 Grand Hauler, the iconic North American big rig announced in 2015. It is a great option for those without the time or confidence to apply a paint job to their kit, as the body, H, P, and Q14/Q15 parts of the kit are pre-painted Metallic black (Tamiya Color TS-40), and – in a first for the 1/14 R/C Tractor Truck series - given a matte coating which provides a cool look and protection from damage. About the Model • This is a 1/14 scale R/C model assembly kit. Length: 692mm, Width: 192mm, height: 330mm. • The boxy, customized Grand Hauler form is a real eye-catcher. Body, H, P, and Q14/Q15 parts are molded in black, pre-painted in Metallic black (TS-40), and given a matte urethane top coat for a stunning finish. • The matte paint job adds further emphasis to the numerous metal-plated parts, which include bumpers, radiator grille, roof-top horn and light bezel parts, side and kerb mirrors, air cleaners, mufflers and more! • The tried and tested Tamiya 3-axle chassis utilizes a tough ladder frame with aluminum side channels and resin cross members. A realistic drivetrain setup sees the front mounted motor powering twin rear axles. • 3-speed transmission can be controlled via a separately sold 4ch R/C transmitter. • Metal leaf spring dampers with built-in coil springs provide durable suspension. • Coupler is included to enable connection with any currently available Tamiya 1/14 scale trailer. • Compatible with separately-sold Multi-Function Control Unit MFC-01 (Item 56511) (or MFC-03, Item 56523) for realistic LED lights and sounds.   Warning! Not suitable for children under 14 years.
€459.99
incl. VAT plus P&P

Hornet

Article number: 300058336 Product: 1:14 RC King Hauler Black Edition This is a specially-released edition of Item 56301 King Hauler, which was the first item in the 1/14 Tractor Trucks Series back in 1993. The body and P parts of the kit come pre-painted in Metallic Black for a cool look. About the Model • 1/14 scale R/C tractor truck model assembly kit. • Length: 600mm, Width: 180mm, Height: 255mm. • Body and P parts are replaced with pre-painted Metallic Black parts. • Features a tough ladder frame construction with aluminum side channels and resin cross members. • Metal leaf spring dampers with built-in coil springs provide durable suspension. • Coupler is included to enable connection with any currently available Tamiya 1/14 scale trailer. • A wide variety of Tractor Truck Option Parts are available for you to further customize your machine.   Warning! Not suitable for children under 14 years.
€124.99
incl. VAT plus P&P

King Yellow 6x6 (G6-01)

Article number: 300058653 Product: King Yellow 6x6 (G6-01) This is the second release on the exciting new 6WD G6-01 chassis. Who wouldn’t be thrilled about going to school if you could get driven there on a beast like the school bus-inspired King Yellow 6x6? With an all-new polycarbonate body and separate parts for details, this quirky yet highly effective off-road vehicle will be a super addition to any R/C model collection. About the Model • This is a 1/18 scale R/C model assembly kit. Length: 478mm, width: 270mm, height: 239mm, wheelbase: 173mm + 126mm. • Comes with a realistic, lightweight and durable polycarbonate body that creates the King Yellow, a fun school bus design.   Separate parts are included to recreate details such as the roof lights and stop sign. • The 6WD chassis employs 3 differential gears to transmit power from the front-center-mounted motor to all of the model's wheels.   These differentials are encased in the durable monocoque. • 6-wheel independent double-wishbone suspension is paired with friction dampers. • 2-piece steering tie-rod setup with servo on chassis left for excellent response. • Comes with matte plated deep rim wheels and 113mm diameter tires. • Kit manual build creates a front wheel-steering model. It also includes instructions to re-assemble it into a 4WS model   with steerable rear wheels. Separately-sold 4WS function transmitter and R/C equipment are required. • The model is compatible with many GF-01 chassis Hop Up Option and spare parts.     Warning! Not suitable for children under 14 years.
€219.99
incl. VAT plus P&P

Kubelwagen Type82 Africa Corps

Article number: 300036202 Product: 1:16 Kübelwagen Type 82 Afrika Korps Kubelwagen-Africa Version Because of its reliability and ease of repair, and since its engine did not require a coolant, the Kubelwagen proved particularly effective in North Africa. At the request of various divisions in North Africa for a vehicle suitable for the desert, a Continental balloon tire equipped version went into production from 1942. Two types of balloon tires, a grooved and an ungrooved version were used. Because the tires were wider than normal tires, a spacer to raise the height of a spare tire attachment was added to the hood of the car. Some of the balloon tire equipped Type 82 were even used in Italy after the fighting in North Africa stopped in May of 1943. About the model •1/16 scale plastic model construction kit •Overall length: 238mm, overall width: 103mm, overall height: 93mm •Precisely replicated balloon tire equipped Kubelwagen Type 82 - Africa version Instrument panel, seats and 4-wheel independent suspension system are also reproduced realistically. •All the doors and engine room cover can be modeled in either open or closed position. •The engine room shows mechanical equipment including air cleaner, 4 cylinder horizontally opposed air cooled engine and repair tools •Balloon tires are of semi-pneumatic rubber and front wheels are steerable. •Includes accessories such as jerry cans and canteen for drinking water, Rommel figure and a driver figure.
€99.99
incl. VAT plus P&P
incl. VAT plus P&P

M-07R Chassis Kit

Article number: 300084436 Product: M-07R Chassis Kit This R/C FWD chassis kit takes the revolutionary M-07 Concept and pairs it with a range of option parts, selected by the Tamiya Racing Factory (TRF) team for a racing setup. This is a great value-for money option for those who want to get straight into racing, or achieve a race-spec car without having to select Hop-Up Option and Spare parts themselves. Featured Components - M-07 Concept High-Traction Lower Deck (54812) - TRF Special Damper (Hard Black Coating) (42102) - M-07 Concept Reinforced C Parts (Uprights) 2pcs. (54810) - M-07 Concept Reinforced D Parts (Suspension Arms) 2pcs. (54811) - 33mm Double Cardan Joint Shaft (2pcs.) (42312) - Clamp Type Aluminum Wheel Hub (5mm Thick) (53823) - Rear Stabilizer - Aluminum Cup Joint for TA06 Gear Differential Unit (2pcs.) (54532) - Hard Fluorine Coated 0.6 Aluminum Pinion Gear (20T) (53509) - φ2.6mm Titanium Coated Suspension Shaft Set for Reversible Suspension (53917) - 46mm Titanium Coated Suspension Shafts 2pcs. (53851) - 3x106mm Aluminum Turnbuckle Shaft (54756) About the Model - This is a 1/10 scale R/C chassis assembly kit. Length: 332mm. - Includes dedicated carbon fiber battery holders developed for this product. - The chassis has superb rigidity thanks to reinforced upright and suspension components, as well as a hightraction lower deck. - A highly efficient drivetrain employs 33mm double cardan joint shafts and aluminum joint cups, plus a durable fluorine coated aluminum 20T pinion gear. - Highly agile suspension utilizes TRF Special Dampers, rear stabilizer and titanium coated suspension shafts. - Also included are aluminum hex hubs and 3x106mm turnbuckle shaft.   Warning! Not suitable for children under 14 years.
€239.99
incl. VAT plus P&P

Mesozoic Creatures

Article number: 300060107 Product: Mesozoic Creatures Not everything which lived during the age of the dinosaurs was a massive sauropod. This assembly kit set depicts a variety of smaller dinosaurs such as adolescent Parasaurolophus and Tyrannosaurus as well as Oviraptor and Hypsilophodon. A crocodile as well as an example of an ancestor to today's birds are also included. Use them to populate your dinosaur dioramas.
€13.99
incl. VAT plus P&P

Mig-29 Fulcrum

Detailed Plastic Kit of model Mig-29 Fulcrum in scale 1:72   Warning! Not suitable for children under 14 years.
€16.29
incl. VAT plus P&P

Mountain Rider

Article number: 300047394 Product: Mountain Rider Tamiya is delighted to announce the re-issue of this classic kit (previously Item 84386)! With a 3-speed transmission and highly realistic injection-molded body, it offers a superlative R/C experience not to be missed, and enhanced by numerous metal parts. It depicts a special version of the 3rd generation Toyota Hilux that was sold from 1978; the RN36 model was developed for export markets, and featured live axle leaf-sprung suspension plus a 98hp, 1,968cc 4-cylinder engine. About the Model - This is a 1/10 scale R/C model assembly kit. Length: 525mm, width: 278mm, height: 275mm.   Tread: 200mm (front)/218mm (rear). Wheelbase: 287mm. - Features a realistic injection molded body with roll bar. - The chassis is based around a ladder frame like that of the actual car, and is powered by a 3-speed transmission   with 4WD (1st gear) and 2WD (2nd and 3rd gears), employing a universal drive shaft. - Sturdy suspension features metal axle housings, leaf springs and shackles, while the rear setup is fitted with a radius rod. - Differentials in die cast axle housings front and rear make for smooth turns. - Front & rear large diameter tires are paired with stylish plated wheels. - Separately available LEDs can be installed in the light cases to depict realistic head and tail lights.     Warning! Not suitable for children under 14 years.
€659.99
incl. VAT plus P&P

P-47D Thunderbolt Bubbletop

Article number: 300060770 Product: 1/72 P-47D Thunderbolt Bubbletop About the P-47D Thunderbolt One of the most famous planes of WWII, the P-47D Thunderbolt was an outstanding single seat fighter plane excelling in high-altitude bomber escort and low-altitude ground attack. The P-47D featured a turbo-supercharged engine and was active on both the European and Pacific fronts. To solve the problem of insufficient visibility of earlier models, later Thunderbolt models were redesigned with a transparent bubble canopy, leading to the birth of the "Bubbletop". About the Model •Following the successful release of the P-47D "Razorback", Tamiya now introduces its successor, the "Bubbletop" to the 1/72 scale War Bird Collection. •At just 153mm it is the perfect size for collecting •Fuselage and canopy designed with all new parts to accurately represent bulky size •Loads of accessories including 500 pound bombs and M10 rocket launchers •Decals for 2 types of markings, including the 8th Air Force, 78th Fighter Group.
€19.99
incl. VAT plus P&P

P-47D Thunderbolt Razorback

Article number: 300060769 Product: 1/72 P-47D Thunderbolt Razorback The P-47 was the first single-seated fighter to be equipped with a supercharger paired with a 2000hp engine, allowing it to fly at the same high altitude as bombers. Armed with eight 12.7mm machineguns, the Thunderbolt, with the P-51 Mustang, constituted the main fighters of the US Army Air Force. This is the representation of P-47D early production that was nicknamed "razorback" because of the shape of its upper fuselage behind the cockpit. The P-47D was a high-speed, high-altitude capable fighter and escorted the allied bombers that were conducting raids over Germany. Its 1-ton payload and its robustness made the Thunderbolt the perfect aircraft for ground attacking missions. About the Model •Sharp design of rear fuselage accurately reproduced. •Unique belly shape perfectly replicated thanks to left-right symmetrical construction. • Joining beams used to attach wings to fuselage, ensuring accurate wing angle. •Loads of accessories including 2 x 108 gallon tanks, 2 x 500 pound bombs and 2 x M10 rocket launchers. •For extra accuracy, kit comes with two different propellers to match decal markings. •Decals for 2 fighter groups, including one from Europe and one from the Pacific.
€19.99
incl. VAT plus P&P

Plasma Edge II (TT-02B)

Article number: 300058630 Product: 1/10 RC Plasma Edge II (TT-02B) This is an updated version of the classic Plasma Edge buggy body. It features new stickers and a tweaked body design. It is mounted on the easy-to-build and maintenance TT-02B chassis. The TT-02B uses the TT-02 as its base, adding longer suspension arms, CVA shock units, and buggy bumpers to give it great off-road performance. Of course, it retains the TT-02's excellent drivability and ease of assembly and maintenance, while motor cooling ducts and receiver case add to the model's durability. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.
€144.99
incl. VAT plus P&P

Porsche 911 GT3 CUP08 (TT-01E)

Article number: 300047429 Product: Porsche 911 GT3 CUP08 (TT-01E) Tamiya is delighted to announce this product, which sees the stylish Porsche 911 GT3 Cup VIP 2008 body released in an assembly kit for the first time! (It was previously released as an XB model – Item 84059.) The body depicts a car from the one-make Porsche Supercup series in 2008. The model is based upon the proven shaft-driven 4WD chassis TT-01 Type-E. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 465mm, width: 195mm, height: 134mm. • The elegant 911 form is captured accurately in polycarbonate. Front and rear light cases are compatible with separately sold LEDs for a lit-up model. • Separate molded parts recreate side mirrors and sporty rear wing. • Stickers are included to recreate a range of markings and logos. • Stylish wheels are molded in Silver, and paired with slick tires. • This model runs on the short wheelbase (251mm) version of the TT-01 Type-E chassis, which features shaftdriven 4WD for easy handling, and great customizability. • A wide range of option parts is available to tune the TT-01 Type-E chassis.   Warning! Not suitable for children under 14 years.
€139.99
incl. VAT plus P&P

Republic F-84G Thunderjet

Article number: 300060745 Product: Republic F-84G Thunderjet Towards the end of World War II, information about advanced aeronautical technology was captured in Germany by the U.S. Forces. One of them was an analysis of the studies carried out by Dr. Alexander Lippisch on delta winged aircraft. Based upon the information, the Douglas firm developed the F4D Skyray, the only operational interceptor with delta wings in the U.S. Navy. Starting the design in 1947, Douglas was awarded a contract for the construction and testing of two prototypes in December 1948. The first prototype took off on its maiden flight in January 1951. The second prototype flew shortly thereafter, and the airframe set two new world records, absolute speed record of 1,211 km/h and 100km closed course record of 1,171km/h, in October 1953. Having numerous improvements and refinements, the first production F4D-1 made its maiden flight in June 1954 and entered squadren service in April 1956. The distinctive 50 degree sweptback wings with round tips were equipped with leading edge slats and trailing edge elevons. A set of trimmers were installed on the inboard trailing edges of the wings. The outer portions of the wings could be folded upwards by oil pressure for carrier stowage. Although the Skyray never saw any combat, it proved its high capability as an interceptor with numerous world records and scramble actions in Taiwan in response to crises in the late 1950's. Detailed Plastic Kit of model Republic F-84G Thunderjet in scale 1:72
€14.99
incl. VAT plus P&P

SEIRAN

Article number: 300060737 Product: 1:72 SEIRAN This is a plastic model assembly kit of the Japanese Navy's special attacking machine, Harumi, developed for an unprecedented strategy of starting from catapult of a large submarine and launching a surprise attack. Faithfully reproduced a unique style fitted with a tightened nose or twin float equipped with an air-cooled engine. 800kg Movement dollies are also convenient for bombs and exhibitions. I printed a decal for the machine number of 6 aircraft. It would be interesting to explore the sunny storm that ended the war before the actual battle participation, by modeling its unknown ability. Detailed Plastic Kit of model SEIRAN in scale 1:72
€12.79
incl. VAT plus P&P

Star Unit Lunch Box Mini SW-01

Article number: 300057409 Product: Star Unit Lunch Box Mini SW-01   Warning! Not suitable for children under 14 years.
€89.99
incl. VAT plus P&P

TA07 PRO Chassis Kit

Article number: 300058636 Product: TA07 PRO Chassis Kit The TA series of mid-range touring car chassis has been running since 1991, and is a great option for racers, plus those ready to take the step up from entry level chassis such as the TT model series. Now it receives an update with this brand new model - the TA07 PRO chassis, which is the first new-number variant since the TA06 in 2011. It utilizes a new composite layout, fused with proven part designs from the top-class TRF419 chassis suspension. As a result, the chassis features highly optimized flex characteristics, plus tried and trusted drivetrain parts in a fresh 1 belt-driven setup. Featured Parts: TRF419 design Uprights TRF419 design Suspension Arms TRF419 design Gear Differential Units TRF Dampers Universal Drive Shafts About the Model • This is a 1/10 scale R/C chassis assembly kit. Uses a composite lower deck/upper frame setup, as opposed to the TA06's monocoque. Lower deck and side frame parts are integrated, while upper frame center brace and F/R stiffener parts are separate. • Slimline lower deck piece features a skid-shaped underside to minimize contact with the track surface. • Single belt-driven 4WD provides efficient acceleration. Drivetrain utilizes 8 ball bearings. • The motor can be switched between one of three positions, each with its own performance characteristics. • Utilizes race-proven TRF419 suspension, steering parts (same Ackerman geometry) and gear diff units. • For those who can't wait to soup up or tweak the chassis even further, Hop-Up options are going on sale soon. • Includes universal drive shafts, adjustable battery holder and TRF dampers. Battery is inserted from chassis side.   Warning! Not suitable for children under 14 years.
€279.99
incl. VAT plus P&P

Triceratops Eurycephalus

Article number: 300060201 Product: Triceratops Eurycephalus ★This is a plastic model assembly kit depicting the Triceratops Eurycephalus, said to have lived in the Mesozoic Era between 230 and 65 million years ago. ★A streamlined assembly procedure uses limited parts, and after that a fun paint job awaits!
€7.39
incl. VAT plus P&P

Wild Willy II

Article number: 300058242 Product: Wild Willy II The Wild Willy 2 is a reproduction of the popular original Wild Willy from the mid 80s. The new Wild Willy has an all new chassis and larger tires allowing it to tread over rough terrain. Of course, the Wild Willys trade mark is the animated wheelie capability thanks to an all new wheelie bar. WR-02 Chassis: The WR-02 chassis features a heavy duty monocoque which has side frames to increase rigidity. R/C unit, motor, and battery pack are positioned along the centerline of the chassis and the motor's power is delivered to the rear wheels via a fully-enclosed gearbox equipped with a differential. A wheelie bar is fitted to enable exciting, wheels in the air driving action. 4-wheel double wishbone suspension and 2-piece steering tie-rod offer smooth steering response. Tires/wheels and the gearbox/motor come pre-assembled for ease of assembly. Requires: 2-channel radio, 7.2 volt battery & charger, and Tamiya TS paint   Warning! Not suitable for children under 14 years.
€189.99
incl. VAT plus P&P
Shipping Information

If you put these articles in your shopping cart, the shipping address of your order is restricted to the following countries:

to the top