Ce site utilise des cookies. En poursuivant la navigation sur ce site, vous acceptez l’utilisation de cookies.
OK
Tamiya CarsonMajoretteDickie ToysSchuco 

T3-01 Alu Adjst Link Arm Set

Article number: 300054835 Product: T3-01 Alu Adjst Link Arm Set This turnbuckle link arm replaces the A9 part in the T3-01 chassis kit. This option part is lightweight, durable and allows adjustability with the link arm between the servo and gearbox, which will let you adjust the lean angle and turn achieved by the model, as well as allowing easier use of a variety of servos. • 3x42mm Aluminum Turnbuckles x2 • 5mm Adjusters (Gray) x4 • 5mm Ball Connectors (Black) x4 • Screws and other small parts for attachment included. • Compatible with T3-01 chassis models.
€9.69
TVA incluse, plus Frais d'expédition

T3-01 Alu Servo Horn

Article number: 300054858 Product: T3-01 Alu Servo Horn This aluminum servo horn not only gives your T3-01 chassis steering linkage even more durability, it also allows the selection of a greater range of motion, and provides smoother cornering. Item Contents/Information • Aluminum Servo Horn x1 • Screws and other small parts for attachment are included. • Compatible with T3-01 chassis models.   Warning! Not suitable for children under 14 years.
€22.49
TVA incluse, plus Frais d'expédition

T3-01 Alu. Fork Stabilizer

Article number: 300054872 Product: T3-01 Alu. Fork Stabilizer These aluminum weights and their stabilizer stay can be fitted in place of the kit standard resin front fender, their weight providing more rigidity, increased front fork stability, and more traction. Two different weights are included to further fine-tune your setup. Item Contents/Information • Aluminum Stabilizer x1 • 6.5g Weight x1 • 3.6g Weight x1 • Compatible with T3-01 chassis models.   Warning! Not suitable for children under 14 years.
€23.69
TVA incluse, plus Frais d'expédition

T3-01 Battery Case

Article number: 300051610 Product: T3-01 Batteriehalterung (4xAA) This battery case for the T3-01 trike chassis allows users to simply use AA batteries to power their Dancing Rider kit instead of rechargeable NiCD, NiMH or Lithium Ion batteries. • Contains parts to assemble one battery case. • Requires four AA alkaline or rechargeable batteries and compatible ESC. Compatible with T3-01 chassis models.
€19.49
TVA incluse, plus Frais d'expédition

T3-01 Chassis (SG Pla)

Article number: 300054822 Product: T3-01 Chassis (SG Pla) These are semi-gloss chrome plated main chassis parts for the T3-01 trike chassis kit. They can be used in place of the stock black plastic parts to enhance the look of your Dancing Rider kit. • Semi-Gloss Plated C Parts x1 • Parts include: frame components, R/C and auxiliary decks, battery holder parts and more. • Compatible with T3-01 chassis models.
€22.49
TVA incluse, plus Frais d'expédition

T3-01 Chrome Whl 4 WPS Tire R

Article number: 300054833 Product: T3-01 Chrome Whl 4 WPS Tire R These are plastic chrome plated rear wheels designed for the T3-01 Dancing Rider Trike kit. They offer a wider stance thereby improving stability when used in conjunction with a wider tire.
€6.79
TVA incluse, plus Frais d'expédition

T3-01 Chrome Whl 4 WSS Tire R

Article number: 300054831 Product: T3-01 Chrome Whl 4 WSS Tire R These are plastic chrome plated rear wheels designed for the T3-01 Dancing Rider Trike kit. They offer a wider stance thereby improving stability when used in conjunction with a wider tire. • Wheels for Rear Wide Semi-Slick Tires x2 • Attach using B7 and 2.6x20mm screws included in the chassis kit. • Compatible with T3-01 chassis models employing dedicated tires in Item 54830.
€6.79
TVA incluse, plus Frais d'expédition

T3-01 F Spring SH

Article number: 300054839 Product: T3-01 Feder-Set Gabel Weich/Hart This front fork spring set option is designed for the T3-01 (Dancing Rider Kit) chassis. These springs replace the kit standard MC9 parts in the front fork tubes. By using this option spring set, it will help you adapt the model to changing surface conditions and model speed. • Front Springs (Soft) x2 • Front Springs (Hard) x2 • Compatible with T3-01 chassis models.
€6.29
TVA incluse, plus Frais d'expédition

T3-01 Fork (Plated)

Article number: 300054829 Product: T3-01 Fork (Plated) These are chrome plated parts for the Tamiya T3-01 Dancing Rider RC Trike. They add a customized look when replacing the stock gray parts in the original kit. • Plated B Parts x1 • The B Parts sprue contains parts for the model’s front fork. • Compatible with T3-01 chassis models.
€19.79
TVA incluse, plus Frais d'expédition

T3-01 Front Tire (Soft)

Article number: 300054841 Product: T3-01 Rillenreifen vorn mit Einlage (1) This is a soft compound tire for the front of the T3-01 chassis. (Dancing Rider kit) Using this tire will open up a number of different setup options, particularly enhancing grip in mid speed ranges. • Front Tire (Soft) x1 • Inner Sponge x1 (equivalent to Item 54590 M-Chassis Inner Sponge (Super Hard)) • Compatible with T3-01 chassis models.
€5.19
TVA incluse, plus Frais d'expédition

T3-01 Front Wheel (Plated)

Article number: 300054823 Product: T3-01 Front Wheel (Plated) This is a chrome plated front wheel to the front of the T3-01 trike chassis. Use it to spice up the look of your Dancing Rider Kit. • Chrome Plated Front Wheel x1 • Compatible with T3-01 chassis models.
€4.89
TVA incluse, plus Frais d'expédition

T3-01 FRP Support Arms

Article number: 300054859 Product: T3-01 FRP Support Arms 2mm thick FRP support arms part reinforces the chassis and gives the driver even greater controllability! Item Contents/Information • FRP Support Arms x1 • Screws and other small parts for attachment are included. • Compatible with T3-01 chassis models.   Warning! Not suitable for children under 14 years.
€9.29
TVA incluse, plus Frais d'expédition

T3-01 Full Ball Bearing Set

Article number: 300054834 Product: T3-01 Full Ball Bearing Set This is a ball bearing set for the T3-01 Dancing Rider Trike. Ball bearings vastly improve efficiency in all moving parts, thereby increasing speed and run time. • 1280 Ball Bearings x2 • 1060 Ball Bearings x8 • 630 Ball Bearings x4 • Install in place of kit standard G1 (diff), G2 (front wheel, rear axles) and G3 (gear) plastic bushings. • Compatible with T3-01
€25.99
TVA incluse, plus Frais d'expédition

T3-01 Gearbox (SG pla)

Article number: 300054821 Product: T3-01 Gearbox (SG pla) These are semi-gloss chrome plated gearbox parts for the T3-01 trike chassis kit. They can be used in place of the stock black plastic parts to enhance the look of your Dancing Rider kit. • Semi-Gloss Plated A Parts x1 • The A Parts sprue contains parts for the model’s gearbox, transponder stay, rear fender and more. • Compatible with T3-01 chassis models.
€21.79
TVA incluse, plus Frais d'expédition

T3-01 R Spring SH

Article number: 300054840 Product: T3-01 Feder-Set Schwinge Weich/Hart This rear cam side spring option is designed for the T3-01 (Dancing Rider Kit) chassis. These springs replace the kit standard MA10 parts in the rear slide suspension. By using this option spring set, it will help you adapt the model to changing surface conditions and model speed. • Rear Spring (Soft) x1 • Rear Spring (Hard) x1 • Compatible with T3-01 chassis models.
€5.19
TVA incluse, plus Frais d'expédition

T3-01 Steering Spring Set MH

Article number: 300054838 Product: T3-01 Feder-Set Lenkung Mittel/Hart This steering spring set is designed to be used with the T3-01 (Dancing Rider Kit) chassis. These springs replace the kit standard MC10 parts in the top of the front fork. By using these stiffer options, it will help adapt your machine to different surface conditions and model speed. • Steering Spring (Medium) x1 • Steering Spring (Hard) x1 • Sponge Tape (15x150mm) x1 • Compatible with T3-01 chassis models.
€4.29
TVA incluse, plus Frais d'expédition

T3-01 W Pin Spike Tires R *2

Article number: 300054832 Product: T3-01 W Pin Spike Tires R *2 These are wide pin spike tires designed to be used with the Tamiya T3-01 Dancing Rider Trike kit. They offer more stability than the standard tires in the original kit. The pin spikes will also allow you to more easily transverse through low cut grass, turf and hard pack dirt surfaces. • Rear Wide Pin Spike Tires x2 • Inner Sponges x2 • Compatible with T3-01 chassis models employing dedicated wheels in Item 54833
€17.99
TVA incluse, plus Frais d'expédition

T3-01 W Semi-Slick Tires R *2

Article number: 300054830 Product: T3-01 Semi-Slick breit Hinten (2) These are wide semi-slick tires designed to be used with the Tamiya T3-01 Dancing Rider Trike kit. They offer more stability than the standard tires in the original kit. • Rear Wide Semi-Slick Tires x2 • Inner Sponges x2 • Compatible with T3-01 chassis models employing dedicated wheels in Item 54831.
€14.79
TVA incluse, plus Frais d'expédition

TA-01/Manta Ray Front Upright Red (2)

TA01 T.Car Front Upright(Red)
€7.79
TVA incluse, plus Frais d'expédition

TA-01/TA-04/TT-01E Drive Shaft 39mm (2)

39mm Drive Shaft Set
€12.29
TVA incluse, plus Frais d'expédition

TA-04/TA-05 Ball Diff Plate Set (2)

TA04 Ball Diff Plate Set
€5.69
TVA incluse, plus Frais d'expédition

TA-04/TA-05 King Pin Set (4)

TA04 King Pin Set
€3.39
TVA incluse, plus Frais d'expédition
TVA incluse, plus Frais d'expédition

TA-05/TB-03 Drive Shaft 45mm (2) Metal

TA05 Drive Shaft *2
€11.29
TVA incluse, plus Frais d'expédition

TA01/02 4WD Front Gear Case red

Front Gear Case (TA01&02)
€13.29
TVA incluse, plus Frais d'expédition

TA01/02 B-Parts Rear Gearcas red

Skyline Spare Rear Gear Case
€17.79
TVA incluse, plus Frais d'expédition

TA01/02/FF01 C-Parts Rear Upright

  Warning! Not suitable for children under 14 years.
€11.99
TVA incluse, plus Frais d'expédition

TA01/TA02/FF01 D-Parts Body Mount

Skyline Body Mount
€8.99
TVA incluse, plus Frais d'expédition

TA02SW H -Teile Porsche 911GT2 84399

  Warning! Not suitable for children under 14 years.
€11.99
TVA incluse, plus Frais d'expédition

TA05/TB Evo.IV B-Parts Body Mount

TA05 B Parts (Bumper)
€14.99
TVA incluse, plus Frais d'expédition

TA05IFS C-Parts Front Upright (2)

TA05-IFS C Parts (F. Upright)
€5.29
TVA incluse, plus Frais d'expédition

TA05v.2 Low Friction Belt

Article number: 300054170 Product: TA05v.2 Low Friction Belt Belt width: 3mm, Belt size: 342mm. *Standard TA05 & TA05-IFS Belt size: 339mm. The clean-type drive belt resists dust and maintains optimum drive efficiency. The drive belt has a high strength core. The belt comes in black with brown teeth. Can be used with 1/10 R/C Cusco Dunlop Subaru Impreza (TA05 Ver.II Chassis) (Item58435) & 1/10 R/C TA05-IFS R (Item 49491).
€11.79
TVA incluse, plus Frais d'expédition

TA06 Alum. Gear Diff Cover

Art.Nr.: 300054602 Artikelbezeichnung: TA06 Alum. Gear Diff Cover Further improve the reliability of your hi-specification chassis with this aluminum differential unit cover, which boosts the durability of the differential casing. Comes in a blue anodized finish. Compatible with TA06, TA06 PRO, TA06R, XV-01, FF-03R and TRF201XM Chassis cars.
€16.99
TVA incluse, plus Frais d'expédition

TA06 Flanged Tube & Spacer 4,5x3,5mm (2)

Article number: 300054490 Product: TA06 Flanged Tube & Spacer 4,5x3,5mm (2) This item is an integrated 4.5x3.5 flanged tube (used on 4WD touring car chassis such as the TA05, TA06 and TRF417) and 3.0x0.7mm spacer. It makes for easier maintenance, and is lighter compared to the standard kit part. Its fluorine coating also guarantees smoother movement. • TA06 One-piece flanged tube & spacer (fluorine- coated) x2
€3.39
TVA incluse, plus Frais d'expédition

TA06/Pro Cross Shaft Met. Bevelge.-Diff.

Article number: 300054311 Product: TA06/Pro Cross Shaft Met. Bevelge.-Diff. Replace the standard resin cross shafts in the TA06 chassis' kit-included differential gear unit with these metal shafts for enhanced rigidity and even smoother operation.
€9.89
TVA incluse, plus Frais d'expédition

TA06/XV01 18 Teeth Alum. Pully

Article number: 300054450 Product: TA06/XV01 18 Teeth Alum. Pully This precision 18T aluminum pulley features surfaces lined with a high-lubricating coating to improve transmission efficiency and durability when used on the Tamiya TA-06 touring car chassis platform and the XV-01 crossover chassis platform.
€25.99
TVA incluse, plus Frais d'expédition

TA07 Alu. Center Pulley 18T

Article number: 300054722 Product: TA07 Alu Riemenrad 18Zähne Blau elox. This is a lightweight, rigid replacement for the plastic counter-pulley in the TA07 PRO's unique single belt drivetrain. The aluminum part increases reliability, plus improves efficiency and torque output. Set Contents Aluminum Center Pulley (18T) x1 Pulley uses a low-friction anodized finish. Compatible with TA07 PRO chassis.
€25.49
TVA incluse, plus Frais d'expédition

TA07 Aluminum Counter Pulley

Article number: 300054706 Product: TA07 Aluminum Counter Pulley This is a lightweight, rigid replacement part for the plastic counter-pulley found in the TA07 PRO's unique single belt drivetrain. It will add reliability, and improve efficiency. Aluminum Counter Pulley x1 Part has a stylish blue anodized finish. Ball bearing not included. Compatible with the TA07 PRO chassis.
€9.19
TVA incluse, plus Frais d'expédition

TA07 Aluminum Motor Mt Posts

Article number: 300054725 Product: TA07 Aluminum Motor Mt Posts These motor mounts are made of aluminum. They replace the kit standard plastic parts that attach to the main motor plate for increased rigidity and support when using high powered motors. Aluminum Motor Mount Post x2 Blue anodized finish. Aluminum parts give rigid attachment and minimal power loss, even when using more powerful motors. Compatible with TA07 PRO chassis cars.
€10.99
TVA incluse, plus Frais d'expédition

TA07 Aluminum Servo Mount

Article number: 300054724 Product: TA07 Aluminum Servo Mount This is an aluminum lightweight servo mount designed to replace the kit standard plastic part on the TA-07 chassis. The aluminum part offers superior rigidity compared to the plastic part. It will also help reduce flex in that part of the car for more direct feel. TA07 Aluminum Servo Mount x1 Blue anodized finish. Gives more precise steering response. Can be attached to the frame center section (stiffener) to improve overall chassis rigidity. Compatible with TA07 PRO chassis cars.
€30.49
TVA incluse, plus Frais d'expédition

TA07 Aluminum Steering Arms

Article number: 300054704 Product: TA07 Aluminum Steering Arms This lightweight, rigid aluminum parts share the proven TRF419 race machine design. Fit them in place of the kit-standard plastic TA07 PRO parts to add bite to your handling at high speed. Aluminum Steering Arm x2 Parts have a blue anodized finish. 850 ball bearings are pre-inserted into the arms. Recommended for use with Item 54705 TA07 Aluminum Steering Bridge. Compatible with the TA07 PRO chassis, TRF419 and TRF419X chassis.
€31.99
TVA incluse, plus Frais d'expédition

TA07 Aluminum Steering Bridge

Article number: 300054705 Product: TA07 Aluminum Steering Bridge Like Item 54704 (TA07 Aluminum Steering Arm Set), this lightweight, rigid aluminum part shares the proven TRF419 race machine design. Fit instead of the TA07 PRO kit-standard plastic part to add bite to your handling at high speed. Aluminum Steering Bridge x1 Part has a blue anodized finish. 630 ball bearings are pre-inserted. Recommended for use with Item 54704 TA07 Aluminum Steering Arm Set. Compatible with TA07 PRO chassis, TRF419 and TRF419X chassis.
€19.99
TVA incluse, plus Frais d'expédition

TA07 Carbon Damper Stay R

Article number: 300054721 Product: TA07 Carbon Damper Stay Rear This lightweight and rigid carbon fiber damper stay is for the TA07 PRO chassis. It provides multiple attachment holes to open up a range of shock angle setup options.
€20.99
TVA incluse, plus Frais d'expédition

TA07 Carbon Rein. A Parts

Article number: 300054743 Product: TA07 Carbon Reinforced A Parts / Gearbox These are carbon fiber-reinforced nylon resin A-parts for the Tamiya TA-07 on-road chassis. The parts package contains bulkhead, gear cover, motor mount post, steering arm parts and more. •TA07 A Parts Sprue x1 •Carbon-fiber reinforced parts improve performance on high-grip carpet and asphalt surfaces. Tuning Tip: Use kit supplied parts for low traction conditions. •Compatible with TA07 PRO chassis. •It's recommended to use Item 54232 RC M3x0.5mm Thread Forming Tap to pre-tap screw holes.
€15.79
TVA incluse, plus Frais d'expédition

TA07 Carbon Rein. K Parts

Article number: 300054744 Product: TA07 Carbon Reinforced K Parts / Stiffener These are carbon fiber-reinforced nylon resin K-parts. The parts package contains various stiffener parts which adjust the chassis rigidity. Use in combination with the kit supplied FRP parts to alter chassis flex characteristics. •TA07 K-Parts Sprue x1 •Carbon-fiber reinforced parts improve performance on high-grip carpet and asphalt surfaces. Tuning Tip: Use kit supplied parts for low traction conditions. •Compatible with TA07 PRO chassis. •It's recommended to use Item 54232 RC M3x0.5mm Thread Forming Tap to pre-tap screw holes
€14.19
TVA incluse, plus Frais d'expédition

TA07 Carbon Rein. Lower Deck

Article number: 300054745 Product: TA07 Carbon Reinforced Lower Deck This is a carbon fiber-reinforced nylon resin version of the kit supplied FRP (Fiberglass Reinforced Plastic) TA07 lower deck. Use this chassis in combination with stock FRP and Hop-Up Option carbon-reinforced parts to alter the TA-07's chassis flex characteristics. By doing so you can fine tune the TA-07 machine to match the conditions of your racing surface. •TA07 Lower Deck x1 •Carbon-fiber reinforced deck improves performance on high-grip carpet and asphalt surfaces. Tuning Tip: Use kit supplied parts for low traction conditions. •It's recommended to use Item 54232 RC M3x0.5mm Thread Forming Tap to pre-tap screw holes.
€41.99
TVA incluse, plus Frais d'expédition

TA07 Carbon Stiffener (Center)

Article number: 300054755 Product: TA07 Carbon Stiffener (Center) Increase your setup options for the TA07 PRO chassis with this 2mm thick carbon fiber center stiffener. This lightweight and rigid part fits neatly onto the center brace and rear stiffeners for more rigidity and stiffer pitch damping. Item Contents •Carbon Fiber Stiffener (Center) x1 •Screws for attachment included. •This item pairs perfectly with carbon fiber front (Item 54788) and rear (Item 54789) stiffeners. •Compatible with TA07 PRO chassis cars.
€19.79
TVA incluse, plus Frais d'expédition

TA07 Carbon Stiffeners (Front)

Article number: 300054788 Product: TA07 Carbon Stiffeners (Front) Increase your setup options for the TA07 PRO chassis with these 3mm thick carbon fiber versions of the front plastic stiffeners! Lightweight and rigid L/R stiffener and steering support parts fuse chassis and bulkheads together for great rigidity, altering handling characteristics. These parts are ideal for track conditions that have high grip. When using these parts, the chassis will exhibit less lateral chassis flex compared to using resin standard parts.
€26.89
TVA incluse, plus Frais d'expédition

TA07 Carbon Stiffeners (Rear)

Article number: 300054789 Product: TA07 Carbon Stiffeners (Rear) Increase your setup options for the TA07 PRO chassis with these 3mm thick carbon fiber versions of the rear plastic stiffeners! Lightweight and rigid L/R stiffener parts fuse chassis and bulkheads together for great rigidity, altering handling characteristics. These parts are ideal for track conditions that have high grip. When using these parts, the chassis will exhibit less lateral chassis flex compared to using resin standard parts.
€18.99
TVA incluse, plus Frais d'expédition

TA07 Center Shaft Bridge

Article number: 300054751 Product: TA07 Center Shaft Bridge This bridge part fits onto the center shaft (BB21) and counter pulley in the TA07's 1-belt drivetrain. When fitted, it reduces center shaft flex and acts as a simple belt tension adjuster. By using this Hop-Up Option part, you will not need to use the plastic gear cover. •Steel Center Shaft Bridge x1 •840 Ball Bearing x1 •Small parts for attachment included. •Compatible with TA07 chassis cars only.
€28.99
TVA incluse, plus Frais d'expédition

TA07 D Parts Sus Arm Med

Article number: 300054740 Product: TA07 D Parts Suspension Arm Medium The suspension arm design from the TA07/TRF418/419 come in two different materials; fiberglass reinforced plastic and carbon reinforced plastic. The fiberglass reinforced plastic found in the TA-07 is soft by nature while the carbon reinforced plastic found in the TRF418/419 is harder in nature. The TRF419X was the first kit to introduce a "medium" stiffness material and it is now available for the TA-07 and TRF418/419 suspension A-Arm design. They will help in low traction conditions, giving improved control once fitted onto a TA-07 chassis or TRF418/419 machine. •TA07 D Parts (Suspension Arms, Medium) x1 •Set comes with one front and one rear arm. You need to packages to complete one car. •Compatible with cars using TRF418-design suspension arms or Item 54691 TRF419 D Parts (Suspension Arms).
€9.89
TVA incluse, plus Frais d'expédition

TA07 F Direct Coupling (37T)

Article number: 300054690 Product: TA07 F Direct Coupling (37T) This is a Direct Coupler (SPOOL) for the TA-07 racing chassis. It gives your machine sharper initial acceleration and more stability under deceleration by fitting this front direct coupling in place of the kit standard gear differential unit. It also contributes to a lighter-weight chassis. Features a black anodized aluminum holder piece. Utilizes TRF419 steel direct cups. Screws for attachment included. Compatible with TA07 PRO chassis.
€28.99
TVA incluse, plus Frais d'expédition

Tamiya Air Remover

Article number: 300054152 Product: Tamiya Air Remover When assembling your dampers, this air remover offers you a faster way of drawing out the bubbles to help save you time. This item can be used for machines such as 1/8 Nitro that use long dampers. Air remover X 1pc. Pump x 1pc. Sticker x 1pc. Instruction manual x 1pc.
€70.99
TVA incluse, plus Frais d'expédition

Tamiya Alu. Tray (KTC)

Article number: 300067416 Product: Tamiya Alu. Tray (KTC) This handy aluminum parts tray can be a useful multi-purpose addition to your R/C pit setup. Use it to separate small parts and hardware to easily access them while building a new car or maintaining your current one. • Dimensions: 189mm x 132mm x 27mm • Aluminum tray has a cool anodized finish. • Features the Tamiya and KTC (Kyoto Tool) logos in white on the top surface. • KTC will be the first to sell this product, at the Tamiya Fair 2018 (November 17-18).   Warning! Not suitable for children under 14 years.
€26.99
TVA incluse, plus Frais d'expédition

TAMIYA Ball Bearing Set 1150 (16)

Article number: 300054579 Product: Ball Bearing Set 1150 (16) When tuning up your R/C car, ball bearings are a great first step, reducing power loss in the drivetrain and increasing the longevity of axle joints when using them to replace plastic bearings. The contents of this set can be used to replace the plastic bushings in many of Tamiya’s entry level kits, including the new entry level 2WD buggy DT-03. Contains 1150 Ball Bearings x16 Compatible with DT-03, DT-02 chassis (require 14 ball bearings), and WR-02, WR- 02G, WT-01 chassis (require 16).
€27.49
TVA incluse, plus Frais d'expédition

Tamiya Ball Differential Grease 10g

Ball Diff Grease   Warning! Not suitable for children under 14 years.
€10.79
TVA incluse, plus Frais d'expédition

Tamiya Ball Head Set 5mm/M3 (8)

5mm Ball Connector *8
€5.69
TVA incluse, plus Frais d'expédition

TAMIYA Buggy Diver Figure Set

Article number: 300054626 Product: TAMIYA Buggy Driver Figure Set Is your buggy model missing a driver? Then this new parts set will be a great addition to your off-road car! This classic driver figure may be used to add scale realism to any off-road machine. Includes parts for driver figure with helmet. Parts depicting headlights are included. Parts are included to allow attachment to body or chassis, depending upon the model  
€4.49
TVA incluse, plus Frais d'expédition

Tamiya CA Cement for Rubber Tires 5g

Article number: 300053339 Product: Tamiya CA Cement Quick Type 2g CA Cement (for Rubber Tires)   Warning! Not suitable for children under 14 years.
€11.99
TVA incluse, plus Frais d'expédition

TAMIYA Heat Shrink Tubing Set (7) 100mm

Article number: 300054607 Product: TAMIYA Heat Shrink Tubing Set (7) 100mm This tubing shrinks when it is heated with a dryer or other heat source, firmly and safely insulating wire such as that in motor or ESC cables. The set includes 3 different diameters of tubing for versatility of use. Set Contents 5mm Heat Shrink Tubing (100mm) x5 3mm Heat Shrink Tubing (100mm) x1 2mm Heat Shrink Tubing (100mm) x1
€3.19
TVA incluse, plus Frais d'expédition

Tamiya LED 3mm Halogen White TLU-01

Article number: 300054599 Product: Tamiya LED 3mm Halogen White TLU-01 This 3mm Halogen White LED light recreates a halogen shade reminiscent of that on classic autos, and the two sizes can be employed to depict headlights, fog lamps, position lights, reverse lamps and so on. Package contains 2 high-brightness LEDs which can be effortlessly connected to the Tamiya TLU-01 Light Control Unit. NOTE: Not compatible with Multi-Function Control Units Items 53957, 56511 and 56523.
€13.79
TVA incluse, plus Frais d'expédition

Tamiya LED 5mm Halogen White TLU-01

Article number: 300054600 Product: Tamiya LED 5mm Halogen White TLU-01 This 5mm Halogen White LED light recreates a halogen shade reminiscent of that on classic autos, and the two sizes can be employed to depict headlights, fog lamps, position lights, reverse lamps and so on. Package contains 2 high-brightness LEDs which can be effortlessly connected to the Tamiya TLU 01 Light Control Unit. NOTE: Not compatible with Multi-Function Control Units Items 53957, 56511 and 56523.
€13.79
TVA incluse, plus Frais d'expédition

Tamiya LED Light orange 3mm für TLU-01

Article number: 300053912 Product: Tamiya LED Light orange 3mm für TLU-01 Tamiya has now expanded the line of LED lights for scale appearance to most polycarbonate RC car bodies. These new LEDs feature various colors and diameters, each item includes 2 LED bulbs and they will enable customers to create their own unique lighting designs. All of these LEDs are designed for use with, and can be effortlessly installed into, the TLU-01 Light Control Unit. Package includes 2 LED. Lights with 16" leads. *These LEDs are designed for use with TLU-01 only and cannot be used with other items (1/14 R/C Tractor Trucks, etc.) Tamiya LED Light 3mm Orange
€13.29
TVA incluse, plus Frais d'expédition

Tamiya LED Light red

Article number: 300053911 Product: Tamiya LED Light red Tamiya has now expanded the line of LED lights for scale appearance to most polycarbonate RC car bodies. These new LEDs feature various colors and diameters, each item includes 2 LED bulbs and they will enable customers to create their own unique lighting designs. All of these LEDs are designed for use with, and can be effortlessly installed into, the TLU-01 Light Control Unit. Package includes 2 LED. Lights with 16" leads. *These LEDs are designed for use with TLU-01 only and cannot be used with other items (1/14 R/C Tractor Trucks, etc.) Tamiya LED Light?5 Red
€13.29
TVA incluse, plus Frais d'expédition

Tamiya LED Light red (3mm)

Article number: 300054009 Product: Tamiya LED Light red (3mm) Tamiya has now expanded the line of LED lights for scale appearance to most polycarbonate RC car bodies. These new LEDs feature various colors and diameters, each item includes 2 LED bulbs and they will enable customers to create their own unique lighting designs. All of these LEDs are designed for use with, and can be effortlessly installed into, the TLU-01 Light Control Unit. *These LEDs are designed for use with TLU-01 only and cannot be used with other items (MFC Units for 1/14 R/C Tractor Trucks, etc.) Tamiya LED LIGHT?3 Red
€15.29
TVA incluse, plus Frais d'expédition

Tamiya LED Light white (3mm)

Article number: 300054008 Product: Tamiya LED Light white (3mm) Tamiya has now expanded the line of LED lights for scale appearance to most polycarbonate RC car bodies. These new LEDs feature various colors and diameters, each item includes 2 LED bulbs and they will enable customers to create their own unique lighting designs. All of these LEDs are designed for use with, and can be effortlessly installed into, the TLU-01 Light Control Unit. *These LEDs are designed for use with TLU-01 only and cannot be used with other items (MFC units for 1/14 R/C Tractor Trucks, etc.) Tamiya LED LIGHT?3 White
€15.29
TVA incluse, plus Frais d'expédition

Tamiya LED Light white 5mm for TLU-01

Article number: 300053910 Product: Tamiya LED Light white 5mm for TLU-01 Tamiya has now expanded the line of LED lights for scale appearance to most polycarbonate RC car bodies. These new LEDs feature various colors and diameters, each item includes 2 LED bulbs and they will enable customers to create their own unique lighting designs. All of these LEDs are designed for use with, and can be effortlessly installed into, the TLU-01 Light Control Unit. includes 2 LED. Lights with 16" leads *These LEDs are designed for use with TLU-01 only and cannot be used with other items (1/14 R/C Tractor Trucks, etc.) Tamiya LED Light 5mm White
€17.49
TVA incluse, plus Frais d'expédition
TVA incluse, plus Frais d'expédition

Tamiya Micro Nozzle f.CA Tire Cement(10)

Micro Nozzle for CA Cement *10
€3.99
TVA incluse, plus Frais d'expédition

TAMIYA TBLM-02S 10,5 T Motor

Article number: 300054611 Product: TAMIYA TBLM-02S 10,5 T Motor This is a Next Generation Tamiya Brushless motor. The motor design incorporates sensor technology, which allows the motor to communicate efficiently with the electronic speed controller (ESC) in your model, allowing efficient performance. Troubleshooting help Key benefits •Provides smooth operation at both low and high speeds. •Brushless design makes for long motor life and reduced maintenance cycles. •Ideally suited to use with Item 45066 Tamiya Brushless ESC 03 (Sensored). Also compatible with Item 45047 (TBLE-01S) and Item 45057* (TBLE-02S). •When using Item 54611 (10.5T) with Item 45057 (TBLE-02S), it is highly recommended to install Item 45063 TFU-01 ESC Cooling Fan Unit to ESC, as ESC's overheat protection function may be activated due to excessive load. •Motor timing is adjustable. 54612 Tamiya Brushless Motor 02 (Sensored) 15.5T
€86.99
TVA incluse, plus Frais d'expédition

TAMIYA TBLM-02S 15,5 T Motor

Article number: 300054612 Product: TAMIYA TBLM-02S 15,5 T Motor This is a Next Generation Tamiya Brushless motor. The motor design incorporates sensor technology, which allows the motor to communicate efficiently with the electronic speed controller (ESC) in your model, allowing efficient performance. Key benefits Troubleshooting help •Provides smooth operation at both low and high speeds. •Brushless design makes for long motor life and reduced maintenance cycles. •Ideally suited to use with Item 45066 Tamiya Brushless ESC 03 (Sensored). Also compatible with Item 45047 (TBLE-01S) and Item 45057* (TBLE-02S). •When using Item 54611 (10.5T) with Item 45057 (TBLE-02S), it is highly recommended to install Item 45063 TFU-01 ESC Cooling Fan Unit to ESC, as ESC's overheat protection function may be activated due to excessive load. •Motor timing is adjustable.
€86.99
TVA incluse, plus Frais d'expédition
TVA incluse, plus Frais d'expédition

Tamiya Y-Cable f. Tank MF-Units (1)

2-Way Connector for 56013   Warning! Not suitable for children under 14 years.
€7.19
TVA incluse, plus Frais d'expédition

TB Evo.III/IV/V Spur Gear 90/96T M0.4

TB Evo3 Spur Gear (90T, 96T)
€8.39
TVA incluse, plus Frais d'expédition

TB Evo.IV/DB-01 3x46mm Suspens.Shaft (4)

TB-Evo4 46mm Sus. Shaft *4
€4.59
TVA incluse, plus Frais d'expédition

TB Evo.IV/DF-03 Flang.Tube 4,6x4,7mm (2)

TB-Evo4 4.6x4.7 Flanged Tube*2
€4.49
TVA incluse, plus Frais d'expédition

TB Evo.IV/TRF416 D-Parts Suspen.Arm Car.

TB-Evo4 D Parts / Sus. Arm
€16.29
TVA incluse, plus Frais d'expédition

TB Evo.V/TA05Ver.II B-Parts Body Mount

TB Evo 5 B Parts (Bumper)
€14.99
TVA incluse, plus Frais d'expédition

TB EvoIV/TA-05VerII 46mm Sw. Sh.Steel(2)

TB-Evo4 46mm Swing Shaft
€24.49
TVA incluse, plus Frais d'expédition

TB-03 Sus.Mount 1C

Article number: 300054071 Product: TB-03 Sus.Mount 1C Newly designed toe angles, and it is possible to assemble them upside down. Can be used with TB-03, TRF416, and TB Evo 5MS, and other chassis. Depending on the size, it maybe necessary to shave the interfering parts of the chassis. TB-03 Sus.Mount 1C
€18.79
TVA incluse, plus Frais d'expédition

TB-03 Sus.Mount 1D

Article number: 300054072 Product: TB-03 Sus.Mount 1C Newly designed toe angles, and it is possible to assemble them upside down. Can be used with TB-03, TRF416, and TB Evo 5MS, and other chassis. Depending on the size, it maybe necessary to shave the interfering parts of the chassis. TB-03 Sus.Mount 1D
€18.79
TVA incluse, plus Frais d'expédition

TB-03 Sus.Mount 1E

Article number: 300054073 Product: TB-03 Sus.Mount 1E Newly designed toe angles, and it is possible to assemble them upside down. Can be used with TB-03, TRF416, and TB Evo 5MS, and other chassis. Depending on the size, it maybe necessary to shave the interfering parts of the chassis. TB-03 Sus.Mount 1E
€18.79
TVA incluse, plus Frais d'expédition

TB-03 Wheel Axles

TB-03 Wheel Axles
€14.79
TVA incluse, plus Frais d'expédition
Informations relatives à l'expédition

Si vous avez mis cet article dans le panier, l'adresse de livraison de votre commande est limitée aux pays suivants :

vers le haut