Ce site utilise des cookies. En poursuivant la navigation sur ce site, vous acceptez l’utilisation de cookies.
OK
Tamiya CarsonMajoretteDickie ToysSchuco 

Spike-Groove Tires frn.(2) Stad.Blitzer

Stadium Blitzer F. Tires
€18.49
TVA incluse, plus Frais d'expédition

Sponge Tape for Bumper *10

Article number: 300054430 Product: Sponge Tape for Bumper *10 Use this tape to fill the gap between the urethane bumper and the body. Better body fit helps improve handling performance, especially on the race track. It can also be applied to battery holders to enable a snug fit between the battery pack and the chassis. Size 150x15x2mm
€4.69
TVA incluse, plus Frais d'expédition

Spring Mount (2 pcs.) for58035

Spring Mount (2 pcs.) for58035   Warning! Not suitable for children under 14 years.
€4.99
TVA incluse, plus Frais d'expédition

Spur Gear 64T 0,6 – TB03/TT02SG

Spur Gear TB-03 06
€5.29
TVA incluse, plus Frais d'expédition

Square Spike Tire rear (2) hi.60/29

Article number: 300053084 Product: TT-02B/DT/DF Square Spike Tire (2) rear Compatible Chassis DF-02, TT-02B, DT-02 & DT-03 Chassis Compatible wheels: Item 51206, Item 51262 and Item 53728.
€18.99
TVA incluse, plus Frais d'expédition

SSBB Damper Caps (5.8 Ball) *4

Article number: 300042343 Product: SSBB Damper Caps (5.8 Ball) *4 ★These caps are for use in unison with Items 54871 and 42344, to give your TRF Super Short Big Bore Dampers a performance boost, and enhance the range of setups at your disposal.   Warning! Not suitable for children under 14 years.
€8.99
TVA incluse, plus Frais d'expédition

SSwing Shaft Pin Protector

Article number: 300053890 Product: Swing Shaft Pin Protector Replacement protectors to use with Item 53889. *Compatible chassis: TRF415MSX. *Use with Item 53889: TRF415, TRF415MS, chassis equipped with Item 49378 TRF415MS Up-Grade Parts Set Swing Shaft Protector *4
€8.99
TVA incluse, plus Frais d'expédition

Stabilizer Rod Stopper (4)

Article number: 300053827 Product: Stabilizer Rod Stopper (4) When using sway bars in a touring car sedan it is critical to fix the sway bar onto the chassis as secure as possible without binding the bar. These stoppers are used to prevent the sway bar from moving left to right under load. A sway bar should move freely up and down, but should not move from side to side. These stoppers prevent that from happening and allow the bars to perform their function correctly. Stabilizer Rod Stoppe
€11.29
TVA incluse, plus Frais d'expédition

Stadium Blitzer Left Upright front (1)

Left Upright for 58101   Warning! Not suitable for children under 14 years.
€6.89
TVA incluse, plus Frais d'expédition

Stadium Blitzer Right Upright front(1)

Right Upright for 58101   Warning! Not suitable for children under 14 years.
€6.89
TVA incluse, plus Frais d'expédition

Steering Arm Bag for 58205

Lieferumfang: 1x Anlenkung Spurstangen 2x Spurstangen verstärkt 2x Lenkhebel lang (je 1x Li./1x Re.)   Warning! Not suitable for children under 14 years.
€14.49
TVA incluse, plus Frais d'expédition

Sticekr Alfa Romeo Gulia

Sticker Bag for 58187   Warning! Not suitable for children under 14 years.
€11.69
TVA incluse, plus Frais d'expédition

STICKER BAG : 47414

  Warning! Not suitable for children under 14 years.
€54.29
TVA incluse, plus Frais d'expédition

STICKER BAG : 58609

  Warning! Not suitable for children under 14 years.
€19.49
TVA incluse, plus Frais d'expédition

Sticker MAN TGX 18.540 Ver.II

  Warning! Not suitable for children under 14 years.
€18.49
TVA incluse, plus Frais d'expédition

Sticker Monster Beetle 58618

  Warning! Not suitable for children under 14 years.
€12.49
TVA incluse, plus Frais d'expédition

Sticker Racing Fighter 58628 PC

  Warning! Not suitable for children under 14 years.
€11.49
TVA incluse, plus Frais d'expédition

Sticker Set Neo Scorcher 58568

  Warning! Not suitable for children under 14 years.
€17.49
TVA incluse, plus Frais d'expédition

Sticker-Bag Sand Scorcher 58452

  Warning! Not suitable for children under 14 years.
€16.99
TVA incluse, plus Frais d'expédition

Subaru Legacy B4 2.0 Body

Subaru Legacy B4 2.0 Body
€40.99
TVA incluse, plus Frais d'expédition

Super Clod Buster Wheels chrome (2)

Lieferumfang 2 Stück.   Warning! Not suitable for children under 14 years.
€25.99
TVA incluse, plus Frais d'expédition

Super G.Radial Tire Wide *2

Article number: 300053231 Product: Super G.Radial Tire Wide *2 This is a high traction compound radial tire designed to fit Tamiya 32mm wheels commonly used in the rear of sports cars that utilize a wide rear tire. Use in conjunction with item 53214 RC Super Grip Radial Tire 26mm to improve overall traction on cars such as the Porsche 934 Jagermeister (TA-02SW), Porsche 911 Carrera RSR or any Tamiya kit that uses a rear 32mm wheel. • Wide Super Grip Radial Tires x2 • Compatible with touring car models using 32mm wide tires and wheels. Super G.Radial Tire Wide *2
€19.29
TVA incluse, plus Frais d'expédition

Super Grip Radial Tire (2)

Super Grip Radial Tire *2
€20.99
TVA incluse, plus Frais d'expédition

Super Slicks *2

Super Slicks *2
€22.99
TVA incluse, plus Frais d'expédition

Super Stock Motor "BZ" Off-Road

Article number: 300053930 Product: Super Stock Motor "BZ" Off-Road ★This versatile motor features torque ideally suited to off-road cars. ★It utilizes brush damper, terminal heat sink, and chip condenser components. ★A sponge cover is included to protect the motor. ★The gun metal color can has slits to help heat dissipate. ★Features a blue anodized end bell. ★Input voltage: 7.2V ★RPM (without load): 26,500 ★Maximum torque: 49mN-m (7.2V) ★Use ball bearings when installing this motor. ★XV-01 series chassis will require motor extension cables.   Warning! Not suitable for children under 14 years.
€61.99
TVA incluse, plus Frais d'expédition

Super Stock Motor TZ

Article number: 300053696 Product: Super Stock Motor TZ With the popularity of touring car racing, there has been a growing demand for high performance 23T stock motors. To meet these demands Tamiya introduces the Super Stock Motor TZ. Perfect for endurance racing and low speed tracks, the TZ features more torque and higher revolutions than the Type S Stock Motor. Features standard brushes, blue anodized end bell with brush dampers, terminal heat sink, detachable chip capacitor and can be disassembled for easy maintenance. Super Stock Motor TZ A high performance motor for electric radio control car use. A high torque motor designed for endurance race or low speed track. Can be disassembled for maintenance. Blue anodized end bell with brush dampers. Features terminal heat sink and detachable chip capacitor. 23 turn motor Usable voltage: 7.2V R.P.M. at best efficiency: 26,500rpm (7.2V) Torque at best efficiency: 500g-cm (7.2V) JRM certified motor.
€56.99
TVA incluse, plus Frais d'expédition

SW-01 A Parts Chassis Clr Lgry

Article number: 300054920 Product: SW-01 A Parts Chassis Clr Lgry Give your SW-01 chassis model a fresh look using these color variation parts. Molded in light gray tinted transparent plastic, they will go well with a whole range of different liveries and color schemes. Item Contents/Information • SW-01 A Parts (Light Gray) x1 • Compatible with SW-01 chassis cars.   Warning! Not suitable for children under 14 years.
€10.79
TVA incluse, plus Frais d'expédition

SW-01 Full Ball Bearing Set

Article number: 300054900 Product: SW-01 Full Ball Bearing Set Smooth, effortless power awaits on the mini wheelie SW-01 chassis with this dedicated set of ball bearings! Item Information/Contents • 1280 Ball Bearings x4 • 1060 Ball Bearings x8 • 630 Ball Bearings x8   Warning! Not suitable for children under 14 years.
€38.99
TVA incluse, plus Frais d'expédition

SW-01 Metal Cross Joints *4

Article number: 300054928 Product: SW-01 Metal Cross Joints *4 Give your SW-01 chassis universal shafts a further boost with these metal alternatives to the kit plastic parts, for the ability to withstand plenty of rough-and-tumble action. Item Contents/Information • SW-01 Metal Cross Joints x4 • These components can be used in place of kit-standard C8 parts. They are crafted in durable brass and give great durability in conjunction with kit-standard metal BA10 dog-bone shafts. • Compatible with SW-01 chassis models. • Always use these components when fitting the chassis with Item 54919 Type 370 Torque-Tuned Motor.   Warning! Not suitable for children under 14 years.
€10.79
TVA incluse, plus Frais d'expédition

SW-01 Spring Set SH

Article number: 300054899 Product: SW-01 Spring Set SH Tune up the strut suspension on your mini wheelie SW-01 chassis with this set, which includes four each of soft and hard coil springs. Item Information/Contents • Soft Springs x4 (Red) • Hard Springs x4 (Blue) • Colors denote markings on springs for differentiation.   Warning! Not suitable for children under 14 years.
€5.59
TVA incluse, plus Frais d'expédition

SW-01 Upper Arm Connectors

Article number: 300054898 Product: SW-01 Upper Arm Connectors Convert your mini wheelie SW-01 chassis into a tight-turning monster with these upper arm connectors, which are simply attached to make the chassis 4-wheel steered (4WS)! Item Information/Contents • Upper Arm Connectors x2 • Front and rear arms are linked together by these lightweight and rigid FRP connectors, for super-tight 4WS turns. • The connectors also improve steering control while the model is in the middle of a wheelie, for a truly acrobatic drive! • Small parts for attachment are also included.   Warning! Not suitable for children under 14 years.
€13.49
TVA incluse, plus Frais d'expédition

Swing Shaft 44mm

Article number: 300054078 Product: Swing Shaft 44mm Can be used for uprights with 1050 full ball bearing specifications. When the shafts are assembled, they enable a clean, smooth cornering as well as help in reducing speed loss. It is also possible to exchange these parts with those found in factory finished models, improving the cars performance. Item Contents •44mm Swing Shafts 2 pcs. Can be used with the following chassis: •TB-03, TA05, IFS-R: 53724, 51092 46mm Swing Shafts •TRF416, TB Evo, 5MS: 54077, 54078 44mm Swing Shafts •53500 Cross Joints for Assembly Universal Shaft Set Swing Shaft 44mm
€23.99
TVA incluse, plus Frais d'expédition

T Parts Air intake MB Arocs / 56352

  Warning! Not suitable for children under 14 years.
€18.99
TVA incluse, plus Frais d'expédition

T-Parts 56020

T Parts for 56019   Warning! Not suitable for children under 14 years.
€17.29
TVA incluse, plus Frais d'expédition

T3-01 11spk Wheels FlOra *2

Article number: 300054913 Product: T3-01 11spk Wheels FlOra *2 Give your T3-01 chassis model a bit of a makeover with these jazzy fluorescent orange versions of the rear wheels included in the R/C Dancing Rider model! Item Contents/Information • 11-Spoke Wheels (Fluorescent Orange) x2 • Compatible with T3-01 and M-chassis models.   Warning! Not suitable for children under 14 years.
€4.29
TVA incluse, plus Frais d'expédition

T3-01 1pc Rear Axle Shaft

Article number: 300054857 Product: T3-01 1pc Rear Axle Shaft This is a rigid, highly durable one-piece shaft for efficient drive and secure wheel attachment. Comes with blue anodized 9mm hex hub. (Not compatible with T3-01 specific wheels.)   Warning! Not suitable for children under 14 years.
€28.99
TVA incluse, plus Frais d'expédition

T3-01 370 Sport-Tuned Motor

Article number: 300054860 Product: T3-01 370 Sport-Tuned Motor ★This tuned motor is perfect for use with the R/C Dancing Rider, and offers dynamic drive. ★Input voltage: 6.6-7.2V ★RPM: 22,200 (at 7.2V) ★Maximum torque: 4.91mN-m ★Maximum usage: 2.85A Compatible Chassis T3-01 Chassis *Use with Item 54228 Fluorine Coated 06 Module Pinion Gear (26T, 27T), Item 54834 T3-01 Full Ball Bearing Set, Item 54857 T3-01 One-Piece Rear Axle Shaft Set and Item 54876 T3-01 Reinforced Differential Joint & Pinion Set. **Item 55105 LF1100-6.6V Racing Pack (M-Size) is required as a power source..   Warning! Not suitable for children under 14 years.
€19.99
TVA incluse, plus Frais d'expédition

T3-01 A Parts Whi

Article number: 300054915 Product: T3-01 A Parts White Give your T3-01 chassis model a bit of a makeover with these pristine white versions of the A parts! Item Contents/Information • A Parts (White) x1 • The A Parts sprue contains parts for the model’s gearbox,    transponder stay, rear fender and more. • Compatible with T3-01 chassis models.   Warning! Not suitable for children under 14 years.
€10.79
TVA incluse, plus Frais d'expédition

T3-01 Aluminum Motor Mount

Article number: 300054877 Product: T3-01 Aluminum Motor Mount This precision aluminum motor mount can be used in place of the kit-standard resin A4 component, for more exacting attachment, and less motor strain thanks to enhanced heat sink effect. Item Contents/Information • Aluminum Motor Mount x1 • 3x6mm Hex Head Countersunk Screws x2 • Pinion Adapter x1 • Included pinion adapter allows use with kit-standard 26T,   plus separately sold 27T and 28T 06 module pinion gears. • Compatible with T3-01 chassis models.   Warning! Not suitable for children under 14 years.
€24.99
TVA incluse, plus Frais d'expédition

T3-01 Battery Case

Article number: 300051610 Product: T3-01 Batteriehalterung (4xAA) This battery case for the T3-01 trike chassis allows users to simply use AA batteries to power their Dancing Rider kit instead of rechargeable NiCD, NiMH or Lithium Ion batteries. • Contains parts to assemble one battery case. • Requires four AA alkaline or rechargeable batteries and compatible ESC. Compatible with T3-01 chassis models.
€19.49
TVA incluse, plus Frais d'expédition

T3-01 C Parts Whi

Article number: 300054917 Product: T3-01 C Parts White Give your T3-01 chassis model a bit of a makeover with these pristine white versions of the C parts! Item Contents/Information • C Parts (White) x1 • The C Parts sprue contains frame components,    R/C and auxiliary decks, battery holder parts and more. • Compatible with T3-01 chassis models.   Warning! Not suitable for children under 14 years.
€10.79
TVA incluse, plus Frais d'expédition

T3-01 Caramel Block Tire F

Article number.: 300054836 Product: T3-01 Geländereifen vo.Caramel-Block (2) This deep caramel block tread pattern front tire will help your T3-01 chassis model take on a variety of surfaces on- and off-road; its soft compound gives superlative grip, especially in the lower speed ranges.
€3.79
TVA incluse, plus Frais d'expédition

T3-01 Chrome Whl 4 WSS Tire R

Article number: 300054831 Product: T3-01 Chrome Whl 4 WSS Tire R These are plastic chrome plated rear wheels designed for the T3-01 Dancing Rider Trike kit. They offer a wider stance thereby improving stability when used in conjunction with a wider tire. • Wheels for Rear Wide Semi-Slick Tires x2 • Attach using B7 and 2.6x20mm screws included in the chassis kit. • Compatible with T3-01 chassis models employing dedicated tires in Item 54830.
€6.79
TVA incluse, plus Frais d'expédition

T3-01 F Spring SH

Article number: 300054839 Product: T3-01 Feder-Set Gabel Weich/Hart This front fork spring set option is designed for the T3-01 (Dancing Rider Kit) chassis. These springs replace the kit standard MC9 parts in the front fork tubes. By using this option spring set, it will help you adapt the model to changing surface conditions and model speed. • Front Springs (Soft) x2 • Front Springs (Hard) x2 • Compatible with T3-01 chassis models.
€6.29
TVA incluse, plus Frais d'expédition

T3-01 FRP Support Arms

Article number: 300054859 Product: T3-01 FRP Support Arms 2mm thick FRP support arms part reinforces the chassis and gives the driver even greater controllability! Item Contents/Information • FRP Support Arms x1 • Screws and other small parts for attachment are included. • Compatible with T3-01 chassis models.   Warning! Not suitable for children under 14 years.
€9.29
TVA incluse, plus Frais d'expédition

T3-01 Full Ball Bearing Set

Article number: 300054834 Product: T3-01 Full Ball Bearing Set This is a ball bearing set for the T3-01 Dancing Rider Trike. Ball bearings vastly improve efficiency in all moving parts, thereby increasing speed and run time. • 1280 Ball Bearings x2 • 1060 Ball Bearings x8 • 630 Ball Bearings x4 • Install in place of kit standard G1 (diff), G2 (front wheel, rear axles) and G3 (gear) plastic bushings. • Compatible with T3-01
€25.99
TVA incluse, plus Frais d'expédition

T3-01 R Spring SH

Article number: 300054840 Product: T3-01 Feder-Set Schwinge Weich/Hart This rear cam side spring option is designed for the T3-01 (Dancing Rider Kit) chassis. These springs replace the kit standard MA10 parts in the rear slide suspension. By using this option spring set, it will help you adapt the model to changing surface conditions and model speed. • Rear Spring (Soft) x1 • Rear Spring (Hard) x1 • Compatible with T3-01 chassis models.
€5.19
TVA incluse, plus Frais d'expédition

T3-01 Steering Spring Set MH

Article number: 300054838 Product: T3-01 Feder-Set Lenkung Mittel/Hart This steering spring set is designed to be used with the T3-01 (Dancing Rider Kit) chassis. These springs replace the kit standard MC10 parts in the top of the front fork. By using these stiffer options, it will help adapt your machine to different surface conditions and model speed. • Steering Spring (Medium) x1 • Steering Spring (Hard) x1 • Sponge Tape (15x150mm) x1 • Compatible with T3-01 chassis models.
€4.29
TVA incluse, plus Frais d'expédition

TA-01/Manta Ray Front Upright Red (2)

TA01 T.Car Front Upright(Red)
€7.79
TVA incluse, plus Frais d'expédition

TA-01/TA-04/TT-01E Drive Shaft 39mm (2)

39mm Drive Shaft Set
€12.29
TVA incluse, plus Frais d'expédition

TA-01/Top Force B-Parts Rear Gear Case

B Parts for 58087   Warning! Not suitable for children under 14 years.
€16.79
TVA incluse, plus Frais d'expédition

TA-04/TA-05 Ball Diff Plate Set (2)

TA04 Ball Diff Plate Set
€5.69
TVA incluse, plus Frais d'expédition

TA-04/TA-05 King Pin Set (4)

TA04 King Pin Set
€3.39
TVA incluse, plus Frais d'expédition

TA-05/TB-03 Drive Shaft 45mm (2) Metal

TA05 Drive Shaft *2
€11.29
TVA incluse, plus Frais d'expédition

TA01/02 4WD Front Gear Case red

Front Gear Case (TA01&02)
€13.29
TVA incluse, plus Frais d'expédition

TA01/02 B-Parts Rear Gearcas red

Skyline Spare Rear Gear Case
€17.79
TVA incluse, plus Frais d'expédition

TA01/TA02/FF01 D-Parts Body Mount

Skyline Body Mount
€8.99
TVA incluse, plus Frais d'expédition

TA02/FF01 Front Upright blue (2)

Upright (2 pcs.) for 53121   Warning! Not suitable for children under 14 years.
€8.19
TVA incluse, plus Frais d'expédition

TA05/IFS/Ver.II Spur Gear 70T M0.6 (1)

TA05 Spur Gear 70T
€5.89
TVA incluse, plus Frais d'expédition

TA05/TB Evo.IV B-Parts Body Mount

TA05 B Parts (Bumper)
€14.99
TVA incluse, plus Frais d'expédition

TA05IFS D-Parts Susp. Arm Set fr/re(2+2)

TA05-IFS D Parts (Sus. Arm)*2
€10.19
TVA incluse, plus Frais d'expédition

TA05IFS/TB03 F-Parts Hub Carrier (2)

TA05-IFS F Parts (H. Carrier)
€7.39
TVA incluse, plus Frais d'expédition

TA05v.2 Low Friction Belt

Article number: 300054170 Product: TA05v.2 Low Friction Belt Belt width: 3mm, Belt size: 342mm. *Standard TA05 & TA05-IFS Belt size: 339mm. The clean-type drive belt resists dust and maintains optimum drive efficiency. The drive belt has a high strength core. The belt comes in black with brown teeth. Can be used with 1/10 R/C Cusco Dunlop Subaru Impreza (TA05 Ver.II Chassis) (Item58435) & 1/10 R/C TA05-IFS R (Item 49491).
€11.79
TVA incluse, plus Frais d'expédition

TA05v.2 Seperate Suspension Mount 1A-1XA

Article number: 300054172 Product: TA05v.2 Seperate Suspension Mount 1A-1XA These new aluminum Separate Suspension Mounts for TA05 Ver.II chassis machines can be used in place of the standard kit M5, 6, 8, 9 parts allowing you to further customize your toe-angle settings. In addition, when replacing the suspension mounts you have the choice of two suspension ball installation pitches (1A-1XA). When using them on the rear side of the front suspension mount, 5mm Suspension Ball (Item 50994) or 5mm Fluorine Coated Suspension Ball (Item 53709) must be used. Aluminum Separate Suspension Mount (1A-a) X 1pc. Aluminum Separate Suspension Mount (1A-b) X 1pc. Can be used with 1/10 R/C Cusco Dunlop Subaru Impreza (TA05 Ver.II) (Item 58435).
€28.49
TVA incluse, plus Frais d'expédition

TA06 Flanged Tube & Spacer 4,5x3,5mm (2)

Article number: 300054490 Product: TA06 Flanged Tube & Spacer 4,5x3,5mm (2) This item is an integrated 4.5x3.5 flanged tube (used on 4WD touring car chassis such as the TA05, TA06 and TRF417) and 3.0x0.7mm spacer. It makes for easier maintenance, and is lighter compared to the standard kit part. Its fluorine coating also guarantees smoother movement. • TA06 One-piece flanged tube & spacer (fluorine- coated) x2
€3.39
TVA incluse, plus Frais d'expédition

TA06 G Difff Steel Bevel Gears

Article number: 300054428 Product: M-08/M-07/TA06 Steel Bevel Gears Replace the kit-standard plastic gears (GV1 and GV2) with these metal gears to allow your car to handle tough driving conditions such as rally driving with a high-powered motor.
€17.49
TVA incluse, plus Frais d'expédition

TA06 Steel Gear Diff. Unit rear

Article number: 300054471 Product: TA06 Steel Gear Diff. Unit rear This item groups together Option Parts to enable racers to effectively upgrade their TA-06 gear differential. Rear Gear Case Set x1 Gear Differential Cup Joint Set x1 Gear Differential Gasket x1 Bevel Gears - large x2, small x4 Gear Cross Shaft This differential gear unit for the TA06 chassis features metal bevel gears and metal cross shafts which are also available as Option Parts, offering greater durability. This set is specifically designed to be used for the rear gearbox. Compatible with TA06, TA06 PRO, FF-03R, and XV-01 chassis. Note: For standard FF-03 cars you must use item 54398 FF03 Gear Case for Gear Differential
€37.99
TVA incluse, plus Frais d'expédition

TA06/Pro Cross Shaft Met. Bevelge.-Diff.

Article number: 300054311 Product: TA06/Pro Cross Shaft Met. Bevelge.-Diff. Replace the standard resin cross shafts in the TA06 chassis' kit-included differential gear unit with these metal shafts for enhanced rigidity and even smoother operation.
€9.89
TVA incluse, plus Frais d'expédition

TA06/TRF417 Spool-Abtrieb,leicht vorn(2)

Article number: 300054544 Product: TA06/TRF417 Spool-Abtrieb,leicht vorn(2) These are the latest option parts to be released for the TA06 4WD touring car chassis. This is a lightweight, newly-designed version of the front direct cup which was originally a part of Item 54304 TA06 Front Direct Coupling (39T). A swing shaft cap (blade) is also included to improve durability. • Lightweight Front Direct Cup x2 • TRF417 V5 Swing Shaft Cap x1 • Compatible with TA06 and TRF417 series chassis cars.
€13.29
TVA incluse, plus Frais d'expédition

TA06/XV01 18 Teeth Alum. Pully

Article number: 300054450 Product: TA06/XV01 18 Teeth Alum. Pully This precision 18T aluminum pulley features surfaces lined with a high-lubricating coating to improve transmission efficiency and durability when used on the Tamiya TA-06 touring car chassis platform and the XV-01 crossover chassis platform.
€25.99
TVA incluse, plus Frais d'expédition

TA07 Alu. Center Pulley 18T

Article number: 300054722 Product: TA07 Alu Riemenrad 18Zähne Blau elox. This is a lightweight, rigid replacement for the plastic counter-pulley in the TA07 PRO's unique single belt drivetrain. The aluminum part increases reliability, plus improves efficiency and torque output. Set Contents Aluminum Center Pulley (18T) x1 Pulley uses a low-friction anodized finish. Compatible with TA07 PRO chassis.
€25.49
TVA incluse, plus Frais d'expédition

TA07 Aluminum Counter Pulley

Article number: 300054706 Product: TA07 Aluminum Counter Pulley This is a lightweight, rigid replacement part for the plastic counter-pulley found in the TA07 PRO's unique single belt drivetrain. It will add reliability, and improve efficiency. Aluminum Counter Pulley x1 Part has a stylish blue anodized finish. Ball bearing not included. Compatible with the TA07 PRO chassis.
€9.19
TVA incluse, plus Frais d'expédition

TA07 Aluminum Motor Mt Posts

Article number: 300054725 Product: TA07 Aluminum Motor Mt Posts These motor mounts are made of aluminum. They replace the kit standard plastic parts that attach to the main motor plate for increased rigidity and support when using high powered motors. Aluminum Motor Mount Post x2 Blue anodized finish. Aluminum parts give rigid attachment and minimal power loss, even when using more powerful motors. Compatible with TA07 PRO chassis cars.
€10.99
TVA incluse, plus Frais d'expédition

TA07 Aluminum Steering Bridge

Article number: 300054705 Product: TA07 Aluminum Steering Bridge Like Item 54704 (TA07 Aluminum Steering Arm Set), this lightweight, rigid aluminum part shares the proven TRF419 race machine design. Fit instead of the TA07 PRO kit-standard plastic part to add bite to your handling at high speed. Aluminum Steering Bridge x1 Part has a blue anodized finish. 630 ball bearings are pre-inserted. Recommended for use with Item 54704 TA07 Aluminum Steering Arm Set. Compatible with TA07 PRO chassis, TRF419 and TRF419X chassis.
€19.99
TVA incluse, plus Frais d'expédition

TA07 C Parts front upright (2)

  Warning! Not suitable for children under 14 years.
€8.79
TVA incluse, plus Frais d'expédition

TA07 Carbon Rein. A Parts

Article number: 300054743 Product: TA07 Carbon Reinforced A Parts / Gearbox These are carbon fiber-reinforced nylon resin A-parts for the Tamiya TA-07 on-road chassis. The parts package contains bulkhead, gear cover, motor mount post, steering arm parts and more. •TA07 A Parts Sprue x1 •Carbon-fiber reinforced parts improve performance on high-grip carpet and asphalt surfaces. Tuning Tip: Use kit supplied parts for low traction conditions. •Compatible with TA07 PRO chassis. •It's recommended to use Item 54232 RC M3x0.5mm Thread Forming Tap to pre-tap screw holes.
€15.79
TVA incluse, plus Frais d'expédition

TA07 Carbon Rein. Lower Deck

Article number: 300054745 Product: TA07 Carbon Reinforced Lower Deck This is a carbon fiber-reinforced nylon resin version of the kit supplied FRP (Fiberglass Reinforced Plastic) TA07 lower deck. Use this chassis in combination with stock FRP and Hop-Up Option carbon-reinforced parts to alter the TA-07's chassis flex characteristics. By doing so you can fine tune the TA-07 machine to match the conditions of your racing surface. •TA07 Lower Deck x1 •Carbon-fiber reinforced deck improves performance on high-grip carpet and asphalt surfaces. Tuning Tip: Use kit supplied parts for low traction conditions. •It's recommended to use Item 54232 RC M3x0.5mm Thread Forming Tap to pre-tap screw holes.
€41.99
TVA incluse, plus Frais d'expédition

TA07 Carbon Stiffener (Center)

Article number: 300054755 Product: TA07 Carbon Stiffener (Center) Increase your setup options for the TA07 PRO chassis with this 2mm thick carbon fiber center stiffener. This lightweight and rigid part fits neatly onto the center brace and rear stiffeners for more rigidity and stiffer pitch damping. Item Contents •Carbon Fiber Stiffener (Center) x1 •Screws for attachment included. •This item pairs perfectly with carbon fiber front (Item 54788) and rear (Item 54789) stiffeners. •Compatible with TA07 PRO chassis cars.
€19.79
TVA incluse, plus Frais d'expédition

TA07 Carbon Stiffeners (Front)

Article number: 300054788 Product: TA07 Carbon Stiffeners (Front) Increase your setup options for the TA07 PRO chassis with these 3mm thick carbon fiber versions of the front plastic stiffeners! Lightweight and rigid L/R stiffener and steering support parts fuse chassis and bulkheads together for great rigidity, altering handling characteristics. These parts are ideal for track conditions that have high grip. When using these parts, the chassis will exhibit less lateral chassis flex compared to using resin standard parts.
€26.89
TVA incluse, plus Frais d'expédition

TA07 Carbon Stiffeners (Rear)

Article number: 300054789 Product: TA07 Carbon Stiffeners (Rear) Increase your setup options for the TA07 PRO chassis with these 3mm thick carbon fiber versions of the rear plastic stiffeners! Lightweight and rigid L/R stiffener parts fuse chassis and bulkheads together for great rigidity, altering handling characteristics. These parts are ideal for track conditions that have high grip. When using these parts, the chassis will exhibit less lateral chassis flex compared to using resin standard parts.
€18.99
TVA incluse, plus Frais d'expédition

TA07 Center Shaft Bridge

Article number: 300054751 Product: TA07 Center Shaft Bridge This bridge part fits onto the center shaft (BB21) and counter pulley in the TA07's 1-belt drivetrain. When fitted, it reduces center shaft flex and acts as a simple belt tension adjuster. By using this Hop-Up Option part, you will not need to use the plastic gear cover.
€28.99
TVA incluse, plus Frais d'expédition

TA07 D Parts Sus Arm Med

Article number: 300054740 Product: TA07 D Parts Suspension Arm Medium The suspension arm design from the TA07/TRF418/419 come in two different materials; fiberglass reinforced plastic and carbon reinforced plastic. The fiberglass reinforced plastic found in the TA-07 is soft by nature while the carbon reinforced plastic found in the TRF418/419 is harder in nature. The TRF419X was the first kit to introduce a "medium" stiffness material and it is now available for the TA-07 and TRF418/419 suspension A-Arm design. They will help in low traction conditions, giving improved control once fitted onto a TA-07 chassis or TRF418/419 machine. •TA07 D Parts (Suspension Arms, Medium) x1 •Set comes with one front and one rear arm. You need to packages to complete one car. •Compatible with cars using TRF418-design suspension arms or Item 54691 TRF419 D Parts (Suspension Arms).
€9.89
TVA incluse, plus Frais d'expédition

TA07 Low-Friction Belt 750/Whi

Article number: 300054798 Product: TA07 Low-Friction Belt 750/White ★This belt is made from low-friction material and is 0.2mm thinner than the standard part, for very smooth running and superb efficiency. ★White material makes for easy identification.
€21.29
TVA incluse, plus Frais d'expédition

TA07 TRF SSBB Carb Damper Sty

Article number:300054746 Product: TA07 TRF SSBB Carbon Damper Stay Fit your TA07 chassis with the super short big bore shock dampers from the TRF419X chassis! This set has F/R 3mm-thick carbon fiber shock damper stays with a lower shock attachment point. Use in conjunction with the Super Short Big Bore Shock dampers as they will give your TA-07 machine sharper steering response and a lower center of gravity. •Carbon Fiber Front Damper Stay for TRF Super Short Big Bore Dampers x1 •Carbon Fiber Rear Damper Stay for TRF Super Short Big Bore Dampers x1 •Screws, ball connector nuts and spacers included. •Compatible with TA07 chassis cars using Super Short Big Bore Dampers (Item 42305).
€39.99
TVA incluse, plus Frais d'expédition
Informations relatives à l'expédition

Si vous avez mis cet article dans le panier, l'adresse de livraison de votre commande est limitée aux pays suivants :

vers le haut