5 22

Categories


Sort by:

Top sellers
  • Top sellers
  • New
  • Price ascending
  • Price descending
Filter

Filter
Price
Category
Brand
Brands & licenses
Scale
Brabham BT44B Martini

1:12 scale

Brabham BT44B Martini

€105.00

Article number: 300012042 Product: 1:12 Martini Brabham BT44B 1975 w/Ph-Et. Tamiya is delighted to announce the re-release of Item 12042 in our legendary 1/12 Big-Scale Racing Car Series. Motor Racing Developments designer Gordon Murray evolved the design of this car which features a monocoque body with a distinctive triangular cross-section and wedge shaped form. Also, Carlos Pace drove the car to a 1st place finish at the Brazil GP and namesake Carlos Reutemann did the same at the German GP, making it one of the more competitive cars in the field during the 1975 Formula One season. The model recreates the lively color scheme of the car, and has a realistic look with Martini and Goodyear logos. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

More
1:12 RC X-SA Lunch Box

RC off-road

1:12 RC X-SA Lunch Box

€190.00

Article number: 300046701 Product: 1:12 RC X-SA Lunch Box The first classic Tamiya model to join the brand new X-SA series is the Lunch Box, favored basher of many an R/C fan and offering an all-around fun 2WD drive on those iconic bulging tires! About the Model • This is a 1/12 scale finished R/C model. Length: 385mm, width: 290mm, height: 225mm. Wheelbase: 207mm. • The classic Lunch Box body is molded in styrene plastic in the original yellow, with the now legendary markings already applied. • Yellow wheels are paired with 115mm tires for some serious off-road capacity. • The durable and easy-to-assemble 2WD chassis features a box type frame with front swing arm independent and rear rolling rigid suspension setups. • A pre-assembled, sealed gearbox protects the diff gear from sand and other intruding debris. • Features a rear wheelie bar for wild wheels-in-the-air driving. • Requires separately sold R/C equipment, battery pack and charger.

More
1:35 Ger. SdKfz.163 Sturmgeschütz IV (1)

1:35 scale

1:35 Ger. SdKfz.163 Sturmgeschütz IV (1)

€19.99

Article number: 300035087 Product: 1:35 Ger. SdKfz.163 Sturmgeschütz IV (1) This is a 1/35 scale plastic model assembly kit recreating the 75mm gun-equipped Sturmgeschütz IV deployed by Nazi Germany in WWII. ★The powerful, form of the vehicle is captured in style. ★Features optional hull front cement block for armor reinforcement, plus parts recreating Schürzen side armor plates. ★Comes with a commander figure in action pose.

More
1:6 Suzuki GSX1100S Katana 1980

1:6 scale

1:6 Suzuki GSX1100S Katana 1980

€95.00

Article number: 300016025 Product: 1:6 Suzuki GSX1100S Katana 1980 One of the most famous motorcycle shows in the world, is held every two years in Cologne West Germany, and the 1980 show is sure to stand out as one of the most unforgettable. One reason was that Honda released their CX500 turbo for the first time, and the second is that Suzuki"s GSX1100S "Katana" (Japanese for sword) was unveiled. The Honda CX500 attracted attention for its advanced engine techniques and the Katana for its advanced and aggressive body styling, which broke from common traditional motorcycle styling. Although the Katana GSX1100S styling impressed the many thousands of viewers, almost everybody thought that it was just for show and the production model would be quite different. During the summer of 1981, Suzuki released the production Katana with almost exactly the same body styling seen at the Cologne show, with subtle improvements in the engine and running gear. The body styling is from the genius of Mr. Hans A. Muth of West Germany, who spent much time ensuring driver comfort in his design, and which proved out in many wind tunnel tests. The entire styling was derived from research on the best drivers position, and the rearward placed backsteps and unique tank styling were not done just for the pleasing jet age appearance. Large capacity fuel tank and small fairing were blended together for the best airflow around the rider and the bike. Although the bike is most noticable for its styling, every part in it is quality. Engine is an air-cooled, parallel 4 of 1075cc, using 16 valves. With the unique Suzuki TSCC (Twin Swirl Combustion Chamber) in the engine, it puts out 111 hp. This tremendous power transmits into a road speed of 230 k/h and its unique body styling deeps it stable even at these high speeds. Suzuki is shipping a 1000cc Katana GSX1000S tot he American market, and also a 750cc version to the European market as well. Requests from Japanese enthusiasts prompted Suzuki to also market a 750cc Katana GSX750S to their market  

More
1:35 WWII Sdkfz.251/1 Halft. Hanomag (5)

1:35 scale

1:35 WWII Sdkfz.251/1 Halft. Hanomag (5)

€15.99

Article number: 300035020 Product: 1/35 WWII Sdkfz.251/1 Halbk. Hanomag (5) In 1938, the German Army decided to develop an armoured personnel carrier on the basis of the 3-ton half track (HL-KL-9p). Hanomag Hannoversch Machinenbau (AG) in Hannover was ordered to develop the running gear and Bussing-NAG in Berlin was to develop the superstructure to be armoured. Design work was hastened on the model of existing armoured cars and a prototype was completed at the end of 1938. The Germans tested the prototype in the Kumahsdorf Proving Ground and accepted it for mass production. Thus was born the Armoured Personnel Carrier Hanomag Sdkfz 251/1 which, we may safely say, was a synonym for the German mechanized corps that showed activity in all battlefields throughout the war.

More
1:10 RC Dark Impact 4WD Buggy DF-03

Plastic models

1:10 RC Dark Impact 4WD Buggy DF-03

€238.00

Article number: 300058370 Product: 1/10 RC Dark Impact 4WD Buggy DF-03 This 1/10 scale 4WD buggy is specially designed to excel in off-road buggy racing. It features a mid-rear mounted motor and longitundinally mounted battery for optimum balance for jumping. Battery is inserted through the bottom of the chassis, eliminating need to remove body, which makes routine maintenance easy and quick. High performance shaft drive 4WD combines with suspension system featuring extra long suspension arms for improved stability and off-road handling. About the Model - High performance 1/10 4WD buggy chassis designed for off- road racing - 4-wheel independent double wishbone suspension features CVA oil dampers and extra long suspension arms for improved stability and handling - Includes sealed diff gearbox indispensable for off-road running - Features full ball bearings - Electronic Speed Controller (Not Included) - Includes 540 type motor - Newly designed off-road tires and wheels featured larger diameter and width, and new tread pattern designed for excellent running and control on hard dirt tracks - Tires: High Density Spike Tires K (4WD/Front, 62/25), High Density Spike Tires K (Rear, 62/35) - Wheels: Large Dish Wheels (4WD/Front, 62/25), Large Dish Wheels (Rear 62/35) - 2.94 internal gear ratio. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

More
1:10 Rc Plasma Edge II GM (TT-02B)

RC buggys

1:10 Rc Plasma Edge II GM (TT-02B)

€147.00

Article number: 300047446 Product: 1:10 Rc Plasma Edge II GM (TT-02B) Tamiya is delighted to announce another production of Item 47446, which is based upon the TT-02B buggy chassis featuring superb accessibility and high rigidity. The eye-catching pre-cut body is pre-painted in PS-23 Gun Metal, which is a popular color among R/C fans! Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

More
1:10 RC Toyota Supra Drift Spec TT-02D

RC on-road

1:10 RC Toyota Supra Drift Spec TT-02D

€176.00

Article number: 300058613 Product: 1/10 R/C Toyota Supra (TT-02D) Drift Spec One of the most recognized Japanese sports cars around the world, the Supra has left its mark both on the race track in the hands of pro drivers and on the streets in the hands of enthusiasts. Now, the Tamiya model (original release: Item 58392) is given a new release on the new Tamiya drift unit, the TT-02D chassis. About the Model • This is a 1/10 scale R/C model assembly kit. • The aggressive form is captured faithfully by the polycarbonate body. • Features separately-molded side mirror and rear wing parts. • Includes carbon pattern decals for engine hood and rear wing. • The TT-02D is the specially tuned drift spec of the popular shaft-driven 4WD entry chassis, the TT-02. • Features 24mm width drift-spec tires on metal-plated mesh wheels, CVA oil dampers, full ball bearings, a sport-tuned motor and aluminum motor heat sink. • The body was originally used on Item 58392. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

More
1:24 Figure-Set Rally Mechanics (5) w/A.

1:24 scale

1:24 Figure-Set Rally Mechanics (5) w/A.

€22.99

Article number: 300024266 Product: 1/24 Figure-Set Rally Mechanics (5) w/A. - Five Figures - Jack and stand, slope board, tool box, part box and more - Multiple team markings

More
1:24 Subaru Impreza WRC 2001

1:24 scale

1:24 Subaru Impreza WRC 2001

€30.99

Article number: 300024240 Product: 1/24 Subaru Impreza WRC 2001 Soon after the adoption of the new regulations for the World Rally Championships in 1997, Subaru boldly entered their Impreza WRC. That well-balanced machine was equipped with a powerful horizontally opposed 4 cylinder turbo engine, and secured that year's Manufacturers Title. In the following years, various improvements were made to the car in accordance with changes in the production model. The 2001 Impreza adopted a four-door sedan body and first showed itself at the season opener, the Monte Carlo Rally. The unique appearance of the car was highlighted by small compound headlights, spoiler attached to the extreme rear and blister-style fenders. The engine underwent extensive tuning in an effort to boost responsiveness, and major progress was made in regards to electronic control of the semi-automatic transmission and front, center, and rear differential gearing. Subaru's ace driver, Richard Burns, was accompanied by Markko Martin, Petter Solberg, and Toshihiro Arai.  

More
1:24 Toyota Supra

1:24 scale

1:24 Toyota Supra

€25.99

Article number: 300024123 Product: 1/24 Toyota Supra During the early 1970's, the Toyota Motor Company of Japan ventured into the specialty car field, and soon established a reputation for producing cars with both quality and performance. Their "Supra" series is often described as a re-creation of Toyota's legendary 2000GT sports car, which was an excellent combination of high performance and elegance. Using their latest racing automotive technology, plus their uncanny design genius, the newly designed Supra made its sensational debut during February 1993. Massive and powerful are the words that can best describe this awesome specialty sports car. The top of the line Supra uses a 3-Liter, DOHC 24 valve, straight six cylinder, twin-turbocharged engine, capable of 320 horsepower and 43.6kg/m of torque. In contrast with the company's previous Supra model, which had a very fluid styling composed of gentle curves, the new Supra has a bold dramatic appearance due to its wider body and larger 17-inch wheels. An oversized rear wing has been installed to improve downforce performance during high-speed cruising. This Supra's newly refined suspension has one of the best road holding systems offered by any mass produced sports car, and with its ventilated disk brakes fitted at all corners, and the front end utilizing four piston calipers, it has unmatched stopping power.

More
1:35 BW Flak-Panzer Gepard (1)

1:35 scale

1:35 BW Flak-Panzer Gepard (1)

€23.99

Article number: 300035099 Product: 1:35 BW Flak-Panzer Gepard (1) This is a 1/35 scale plastic model assembly kit depicting the Gepard, a post-WWII anti-aircraft tank operated by West Germany. ★From the 4km-range 35mm cannons to the radar equipment front and rear, the form of the tank is captured in style. ★Features moving barrel and radar depictions, plus opening turret rear hatches. ★Metal net is included in the kit to recreate engine deck grille details. ★Comes with a commander figure in beret.

More
1:35 Fig-Set Ger. Front-Line Soldiers(5)

1:35 scale

1:35 Fig-Set Ger. Front-Line Soldiers(5)

€10.99

Article number: 300035196 Product: 1:35 Fig-Set Ger. Front-Line Soldiers(5) During WWII, German soldiers belonging to armored divisions wore camouflage smocks and M44 field uniforms. This is a plastic assembly kit of five figures which features a noncommissioned officer and a soldier in charging poses armed with a panzerfaust and a MP44 assault rifle, a soldier shooting an MG42 machine gun from his waist, a soldier throwing a hand grenade, and another noncommissioned officer firing his MP44 from his knees. Weapons and accessory parts such as water bottles and gas mask cases all have a sharp detailed finish. Why not display this set with a German armored vehicle model such as a Sd.Kfz. 251/1?

More
1:35 Fig.-Set Ger. MG Troops (7)

1:35 scale

1:35 Fig.-Set Ger. MG Troops (7)

€6.99

Article number: 300035038 Product: 1:35 Fig.-Set Ger. MG Troops (7) This is a 1/35 scale plastic model assembly kit depicting WWII German soldiers with MG34 and MG42 machine guns. ★Features parts to make three different teams of gunner and loader, plus a commander with binoculars for seven figures in total.

More
1/12 Yamaha YZF-R1M

1:12 scale

1/12 Yamaha YZF-R1M

€44.99

Article number: 300014133 Product: 1:12 Yamaha YZF-R1M This is the latest release in the storied Tamiya 1/12 Motorcycle Series, and it recreates the 2018 spec of the highly successful YZF-R1M. 2018 is a landmark year for the long-running YZF-R1, as it celebrates its 20th anniversary; the YZF-R1M is the eighth generation of the bike, released in 2015. It was designed as a circuit motorcycle, and its design and technology were heavily influenced by data harvested from the YZR-M1 MotoGP bike. • This is a 1/12 scale plastic model assembly kit. • Multi-piece recreation of the 4-cylinder engine has superlative detail, from the fine depictions of the radiator, oil cooler and complex cover, to the tubing included to recreate various lines. • Depictions of engine, swing arm, front fork, upper cowl and more are screw-fixed to the frame for maximum precision and durability. • New synthetic rubber tires depict Bridgestone Battlax RS10s with realistically-recreated tread pattern. • Metal transfer to depict Yamaha emblem tentatively planned for inclusion. 

More
1/24 Mercedes-AMG GT3

1:24 scale

1/24 Mercedes-AMG GT3

€58.99

Article number: 300024345 Product: 1:24 Mercedes-AMG GT3 #1 This scale model assembly kit recreates the 2016 Mercedes-AMG GT3 race car. It is a GT3 class spec customer sports car that was converted from the AMG GT road car by the Mercedes-AMG high performance division. The full-size racer features a reliable and powerful 6.3-liter naturally aspirated V8 engine harnessing 558hp. Its carbon fiber body overhauls the road car version and has a prominent grille inspired by the classic 300 SL. The race car is also fitted with racing essentials such as a large rear wing, air intakes, splitter, canards and diffusers contributing to its aerodynamics. All of these details are expertly detailed in the model kit to give the modeler the most accurate parts to finish the model.

More
1:10 RC Formula E Gen2 ChLivery TC01

RC on-road

1:10 RC Formula E Gen2 ChLivery TC01

€280.00

Article number: 300058681 Product: 1:10 RC Formula E Gen2 ChLivery TC01 • This is a 1/10 scale R/C racing chassis kit. Length: 370mm, width: 187mm, wheelbase: 257mm. • Adjustable suspension mounts and plastic bushings allow fine tuning of roll center, toe and skid angle settings. • High performance Super Short Big Bore Dampers give super-responsive handling and great corner speed. They are equipped with the latest reinforced V parts, 5.8mm ball connectors and damper caps for truly optimized performance. • Dedicated carbon fiber front-center stiffener elevates pitch rigidity without sacrificing roll flex, for improved front grip and cornering.. • Includes a dedicated new servo mount component. • Integrated stabilizer end and 5mm adjuster parts are used on the new soft front and rear stabilizers. • Aluminum steering bridge and pivot mounts allow fine tuning of steering Ackerman. • Comes in a handy and stylish carry case package. • Please note that motor, tires and R/C equipment are sold separately. Dedicated Components: Carbon front center stiffener Aluminum stiffener mount TA07RR servo mount Soft stabilizers (front & rear)

More
1:10 RC MB Unimog 406 U900 (CC-02)

RC off-road

1:10 RC MB Unimog 406 U900 (CC-02)

€266.00

Article number: 300058692 Product: 1:10 RC MB Unimog 406 U900 (CC-02) • This is a 1/10 R/C model assembly kit. Length: 384mm, width: 196mm, height: 224mm. Wheelbase: 242mm. • The distinctive form of the Unimog is accurately depicted in durable polycarbonate, with separate parts included for side mirrors and fuel tank, plus a metal-plated front grille and emblem. • Includes block pattern tires, and red ABS wheels with a depiction of bead lock designs. • Propeller shafts (short: 76mm) are also included. • The CC-02 chassis is designed for a wide range of off-road scenes including rocky terrain, and its ladder frame is inspired by full-size vehicles and is the base for its superior durability. • A 4WD setup employs the motor longitudinally behind the front axle with separated gearbox and transfer case, and propeller shafts transmitting power to the differential gears front and rear. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

More
1:16 RC Panzer Königstiger Full Option

RC tanks

1:16 RC Panzer Königstiger Full Option

€584.00

Article number: 300056018 Product: 1/16 RC Panzer Königstiger Full Option Tamiya continues to develop its 1/16 R/C Tank Series. The fourth full-option kit to make its appearance is the German Heavy Tank King Tiger. Not only can the model move forward and backward and turn with a great sense of power, but the turret can be rotated and the 88mm gun raised and lowered. To imitate the firing of the main gun and of front machine gun, light flashes while sound is heard. The sound of the engine has been recorded, with the assistance of the French museum of Saumur, from a real Maybach HL230-P30 engine of the only King Tiger kept in working condition in the world. Not only all stages of engine sound (idling through full throttle) but also all the metallic clanking of the tank tracks have been thoroughly recorded. During the second half of WWII, Zimmerit coating was applied on German tanks to protect them from the threat of magnetic mines. For this kit, the Zimmerit coating has been replicated with a unique relief printed seal. Thanks to this seal, you can now represent accurately a late war King Tiger with great ease. About the German King Tiger (Henschel Turret) The German Heavy Tank King Tiger made its appearance during WWII in 1944. The chassis front armor was 150mm thick with 80mm thick side armor and powered by a 700hp Maybach HL230-P30 engine. The Henschel and Porsche companies came up with rival turret prototypes. The first 50 tanks produced had Porsche turret whereas subsequent tanks were equipped with the Henschel designed production turret that featured many improvements over the first model. The King Tiger was armed with a 71-caliber 88mm gun that had enough power to pierce 150mm thick armor from 2000m away. Between The beginning of production in Summer 1944 and March 1945, 440 units were completed. Due to the havoc wreaked by the King Tiger during the final German offensive on the Ardennes front in December of 1944 R/C KING TIGER w/Option Kit   Warning! Not suitable for children under 14 years.

More
1:24 Mercedes Benz SL300 Gullwing

1:24 scale

1:24 Mercedes Benz SL300 Gullwing

€54.99

Article number: 300024338 Product: 1:24 Mercedes Benz SL300 Gullwing The Mercedes-Benz 300SL joins the 1/24 Sports Car Series as it is considered an all-time classic in the automotive world. The real car began life as a prototype for the German motor giant’s works racing team, taking part in international races, and in 1954 a production version debuted at the International Motor Show in New York. Despite nominal road car status the 300SL was still a very racy vehicle and proved popular, particularly in the United States. It possessed a 3-liter engine (hence the 300 in its name), and a highly lightweight body (SL stands for Sport Leicht, lit. "light sports") with striking gull wing doors. 1,400 cars were produced by the end of its production run in May 1957. The Tamiya model kit captures the real life subject down to the working Gull-Wing doors and complex tubular space frame. Productdetails: - This is a 1/24 Scale plastic model assembly kit. - The elegant form of this classic is breathtakingly captured by the model, and includes opening engine hood and gull wing doors. The doors can be locked in open position using a small strut. - Opening the hood reveals the faithful depiction of the engine. Hood can also be locked in open position. - The complex tubular space frame – one of the signature points of the car – is elegant recreated. - Nylon mesh is included to recreate the front air intake - Numerous metal-plated parts recreate side bars, bumpers and more. - Comes with masking stickers for use when painting the model. - Metal transfers are included in the kit to depict mirror surfaces and emblems. - Features newly-designed tire parts.

More
1:24 Nissan Skyline GT-R (R32) Nismo-Cu.

1:24 scale

1:24 Nissan Skyline GT-R (R32) Nismo-Cu.

€35.99

Article number: 300024341 Product: 1:24 Nissan Skyline GT-R (R32) Nismo-Cu. This is a model of the classic Skyline GT-R (R32). This particular kit varies from previous releases as it has brand new parts that depict customizing accessories that were designed and made by Nissan's tuning outfit Nismo. The R32 is the 1989 version of the legendary GT-R. It had a 4WD drivetrain; it was mated to a 280hp engine and it was loaded with cutting-edge design and technological innovations for its day.

More
1:24 Porsche 959

1:24 scale

1:24 Porsche 959

€20.99

Article number: 300024065 Product: 1/24 Porsche 959 The Porsche 959 was first unveiled at the 1983 Frankfurt auto show as a study for a full time 4 wheel drive Group B super sports car. Back then, the automobile was still far from being completed and its potential a mystery. The 959's awesome capabilities matured through thorough research and competition experience with the automobile. It demonstrated its outstanding abilities during the grueling Paris-Dakar Rally, and the Le Mans 24 hour endurance race. Porsche has taken their race car technology and put it into the 959, to produce a car that provides every comfort, with smooth running and the low interior noise expected of a road car, while offering high safety reserves. Thus the 959, despite its massive 450hp engine power, can be drive easily at its lower RPM ranges. The 2848cc engine is a descendent of the famous 956 and 962 Porsche Group C racer. It is an air/liquid cooled, flat 6 cylinder, DOHC equipped with two turbochargers, providing a top speed of more than 300km/h. The 959 maintains superb acceleration under all driving conditions, yet it also achieves short braking distances that prove to be a reassuring factor for all classes of drivers. The hollow wheel spokes increase air volume to the brakes and accommodate the fat, low profile Dunlop Denloc tires, and is equipped with a pressure sensor to detect punctures. The Porsche 959 is the car that raised the standard of sports car thinking to a new plateau, by exceeding every known yardstick of handling and performance.

More
1:24 Porsche Turbo 1988 Roadversion

1:24 scale

1:24 Porsche Turbo 1988 Roadversion

€32.99

Article number: 300024279 Product: 1/24 Porsche Turbo 1988 Streetversion Tamiya proudly releases the Porsche 911 Turbo, further expanding our line of Porsche 911 series of models. Famed as the culmination of the 911 series, the Turbos impressive design and performance made it the most well known member of the 911 series. About the Porsche 911 Turbo The 911 Turbo debuted in 1975 as Porsches first street model to feature a turbo engine. The air-cooled, horizontally opposed 6-cylinder engine featured a KKK turbocharger, 3 liter displacement and 260 hp output. Models built after 1978 featured upgraded engine displacement and output of 3.3 liters and 300 hp respectively. The 911 Turbos distinctive style, with its large-size rear wing and front and rear overfenders, coupled with its reliable performance grabbed the attention of car enthusiasts around the world.

More
1:24 Volkswagen Beetle 1300 1966

1:24 scale

1:24 Volkswagen Beetle 1300 1966

€25.99

Article number: 300024136 Product: 1:24 Volkswagen Beetle 1300 1966 Even in this age of sophistication, the popularity of the Volkswagen "Beetle" has not diminished. The original design dates back to the 1930"s when Dr. Ferdinand Porsche provided the design framework for the "People"s Car." Today, with more than 20 million units produced, the Volkswagen Beetle has become a symbol of mass-produced motorization, with no other vehicle exceeding this figure. Built upon the sturdy platform chassis is the amazingly reliable air cooled, flat-four cylinder engine. Suspension is four wheel independent for crisp handling and driving comfort. Although the onset of the Second World War greatly hindered Volkswagen"s marketing opportunities, it made a superb comeback shortly following the conflict, under the skillful guidance of Heinrich Nordhoff. Throughout its production life, the Volkswagen was continuously improved to meet modern automobile standards. An enlarged powerplant displacement and better visibility are two of the notable changes that enabled the Beetle to set standards for the compact car market, decade after decade. The 1966 Volkswagen model is regarded as the classic Beetle, one that retains the most of the original design traits, and it has become a collector"s item. Even today, more than half a century later, watching a nimble street bug is still a pleasant sight to behold, and its unmistakable shape will likely delight generations to come. Volkswagen 1300 Beetle   Warning! Not suitable for children under 14 years.

More
1:35 Brit. Tank Churchill Mk.VII (6)

1:35 scale

1:35 Brit. Tank Churchill Mk.VII (6)

€36.99

Article number: 300035210 Product: 1:35 Brit. Tank Churchill Mk.VII (6) This is a 1/35 scale plastic assembly kit model of the British Infantry Tank Mk.IV Churchill Mk.VIII. Introduced at the end of 1943, the tank demonstrated its worth during the Normandy invasion while supporting Allied infantry units. The traditional form of the tank, including the unique suspension system with multiple small road wheels, has been faithfully reproduced. In addition, the kit comes with figures which depict a commander, gunner, driver, and a farmer. Abundant accessories such as a cart and milk cans are also included to create a simple diorama.

More
1:35 Fig.-Set Tank Ammo Load. Crew (4)

1:35 scale

1:35 Fig.-Set Tank Ammo Load. Crew (4)

€10.99

Article number: 300035188 Product: 1:35 Fig.-Set Tank Ammo Load. Crew (4) This set will allow you to easily recreate a WWII scene of German soldiers loading a tank with shells. ★Set includes four figures in a variety of poses as well as parts to depict the ammunition and wooden ammunition cases. ★Ammunition cases can be used as a highly authentic addition to Tiger I, King Tiger, Panther, and Pz.Kpfw. IV tank models.

More
1:35 Ger. 38(t) Ausf.E/F (1)

1:35 scale

1:35 Ger. 38(t) Ausf.E/F (1)

€31.99

Article number: 300035369 Product: 1:35 Ger. 38(t) Ausf.E/F (1) A brand new face is welcomed to the 1/35 Military Miniatures Series with the addition of the 38(t)! This subject in fact started life as a light tank developed for Czechoslovakia, but was adopted and renamed 38(t) by German forces after their occupation of the country in 1939. It was equipped with a 3.7cm main gun and could reach speeds of up to 42km/h powered by the 125hp engine. A number of variants were produced, of which the Ausf. E/F 38(t)s were manufactured over a one-year period from November 1940; they featured improved armor and were thrown into the conflict with Soviet forces after the start of Operation Barbarossa. • This is a 1/35 scale plastic model assembly kit. • Tamiya designers studied a real 38(t) in the Kubinka Tank Museum, getting the data to make this highlyaccurate model with detail right down to the rivets. • The turret front left sight moves in conjunction with the 3.7cm gun. • Features a realistic recreation of the suspension with large road wheels and upper return rollers. • Assembly type tracks give natural recreation of the upper run ‘sag.’. They feature single piece straight sections. • The kit comes with a figure recreating a commander for placement in the cupola hatch. • Includes two marking options for vehicles with units on the Eastern Front in 1941.

More
1:35 Ger. 38to Tank Destr. Hetzer (1)

1:35 scale

1:35 Ger. 38to Tank Destr. Hetzer (1)

€51.99

Article number: 300035285 Product: 1:35 Ger. 38to Tank Destr. Hetzer (1) Already available as a 1/48 scale MM series kit, Tamiya now responds to the requests of military modellers and announces the release of the German Tank Destroyer Hetzer Mid Production in the 1/35 scale. About the Hetzer In 1943, the German high command ordered development of a new purpose-built tank destroyer to replace all of the interim vehicles like the Marder, and the Hetzer was quickly created to meet this requirement. Based on the Panzerkampfwagen 38(t), the Hetzer housed a crew of 4 in its low, compact hull. It was armed with a powerful Pak 39 L/48 75mm gun in a fixed mounting and featured sloped armor for enhanced protection. 2,584 were produced by May of 1945, and modifications were continually added during production, leading to differences between early, mid, and late production models. About the model •High-quality 1/35 scale assembly kit model of the mid production Jagdpanzer 38(t) Hetzer. •Brand new moldings with new details such as the remote control MG34 machine gun mount on the top of the hull and periscopic binoculars. •Includes both belt type and assembly type caterpillar tracks for more modeling options. •Accessory parts such as a jack and other tools add lifelike detail to the hull. •1 tank crew figure in realistic standing pose included. •4 types of markings also included.

More
1:35 Ger. Krupp Protze w/ 37mm PAK (4)

1:35 scale

1:35 Ger. Krupp Protze w/ 37mm PAK (4)

€35.99

Article number: 300035259 Product: 1:35 Ger. Krupp Protze w/ 37mm PAK (4) About Krupp Protze 1ton (6X4) Towing Truck w/3.7cm Pak Popularly known as the "Boxer" because of its air-cooled flat-four square 4-cylinder engine, the L2 H43 was developed by the Krupp company and mass produced from 1933. This truck was capable of both personnel and light-artillery transport and featured unique 6x4 independent suspension with 4-wheel drive and was capable of speeds up to 70km/h. In 1936, this truck had its horse-power improved from 55hp to 60hp with the development of the L2H431 version. This latter version underwent various improvements, particularly those allowing it to tow a 3.7mm PAK 35/36 anti-tank gun. After this improvement, the L2H431 came to be known as the Protze, and could hold 1 driver and 5 artillery crew. From the start of WWII the Protze was employed as standard equipment in anti-tank artillery divisions and was actively deployed to battlefronts in France and Poland. About the Model ★1/35 scale ★Overall length: 250mm ★Every characteristic of this truck such as the low-profile bonnet, the chassis, the ammunition boxes and the crew seats on the rear part, as well as the spare wheel for the anti-tank gun has been realistically reproduced. ★A 3.7cm Pak anti-tank gun and various accessories are part of the set. ★4 all-new figures and decals for 4 different markings are included.

More
1:35 Ger. SdKfz.182 Königstiger Por-T(1)

1:35 scale

1:35 Ger. SdKfz.182 Königstiger Por-T(1)

€44.99

Article number: 300035169 Product: 1:35 Ger. SdKfz.182 Königstiger Por-T(1) During design of the King Tiger, two 88mm gun-toting turret types were developed: the Porsche-produced variant was recognizable by its curved lines; this model accurately captures the form of a Porsche turreted King Tiger, hitting the nail on the head with differences from the competing Henschel ("Production") turret King Tigers, such as the tapered gun barrel and large grille covers. The model offers a choice of open or closed turret and hull hatches, and succinctly recreates the complex interweaved wheel setup. Belt-type tracks and a commander figure are packaged in the model.

More
1:35 German Heavy Tank Destroyer Elefant

1:35 scale

1:35 German Heavy Tank Destroyer Elefant

€69.99

Article number: 300035325 Product: 1/35 German Heavy Tank Destroyer Elefant This is a 1/35 scale assembly model of the German Heavy Tank Destroyer Elephant. Extensive research was conducted by Tamiya's designers to bring the modeling world the most accurate rendition to date. Historical background In 1941, Porsche created a prototype tank which incorporated radical features including a gasoline-electric hybrid powertrain. In 1943, the tank was transformed into the Ferdinand tank destroyer armed with an 8.8cm PaK 43 L/71 gun housed in a large box-shaped superstructure and 90 units were produced. During the Battle of Kursk, they demonstrated superior anti-armor capability to knock out T-34 and KV-1 tanks at long range, but their slow speed and unreliability resulted in many being immobilized by mechanical troubles. In 1944, 50 surviving Ferdinands were given modifications, including the addition of a machine gun, a commander's cupola, and were re-designated with the name Elefant. The Elefant saw combat on the Italian and Russian fronts, and some fought until the very end of WWII during the Battle of Berlin.

More
1:35 US 10-in-1 Cartons WWII

1:35 scale

1:35 US 10-in-1 Cartons WWII

€3.99

Article number: 300012689 Product: 1:35 US 10-in-1 Cartons WWII These detailed depictions of WWII 10-in1 ration cartons were initially a part of Item 25196, but are now to get their own release in the Detail-Up Parts Series. The 10-in1 Ration was supplied to U.S. troops from 1943 to 1945. One sleeved carton contained four individual boxes, each a day’s rations for ten soldiers and including canned food, biscuits, cereal and more. Item Contents/Information • Sheet dimensions: 200mm x 195mm. • Contains cut-out illustrations for sleeve, carton and inner box components. • One sheet can be used to make eight sets, and you can choose to depict the carton sealed up or even removed from the sleeve and open to reveal the inner boxes. • The sheet also features a basic explanation of the 10-in-1 ration in English and Japanese. • An excellent choice to add further detail to WWII-era U.S. subjects such as those below.

More
1:35 US Med.Tank M4 Sherman Ea.(3)

1:35 scale

1:35 US Med.Tank M4 Sherman Ea.(3)

€32.99

Article number: 300035190 Product: 1:35 US Med.Tank M4 Sherman Ea.(3) This is a 1/35 scale plastic assembly kit of the M4 Sherman, the U.S. Army's mainstay tank during WWII which greatly contributed to the eventual Allied victory. The kit depicts an early production version that was powered by a radial engine and featured sloped frontal armor and a turret without a loader's hatch. Different production methods were used to produce the actual tank, and the welded hull and cast turret have been accurately reproduced. Modellers can also enjoy turret interior details such as the main gun breech and radio equipment. Parts for accessories such as additional hull and turret armor, large fenders, and spare track links are also included. Comes with driver and radio operator torso figures as well as 1 commander figure.

More
1:35 WWII Fig.-Set Ger. Assault Tro. (8)

1:35 scale

1:35 WWII Fig.-Set Ger. Assault Tro. (8)

€6.89

More
1:35 WWII Fig.-Set MG-Crew Maneuver (5)

1:35 scale

1:35 WWII Fig.-Set MG-Crew Maneuver (5)

€10.99

Article number: 300035184 Product: 1:35 WWII Fig.-Set MG-Crew Maneuver (5) This is a plastic assembly model kit of a WWII German machine gun crew in M43 field uniforms and boots with leggings as seen on German soldiers from 1943. This five figure set features a noncommissioned officer carrying an MP40 submachine gun in his hand, three soldiers carrying ammunition cases and a tri-pod gun mount respectively, and the machine gunner with a MG42 machine gun on his shoulder. The set includes sharply detailed parts to depict equipment such as MG42 and MG34 machine guns, tripod, and ponchos. Combine it with models of tanks and other vehicles belonging to the German army for a wider scale diorama.

More
1:350 Gun 46cm Barrels & Projectiles Set

1:350 scale

1:350 Gun 46cm Barrels & Projectiles Set

€18.99

Article number: 300012643 Product: 1:350 Gun 46cm Barrels & Projectiles Set This new set includes 9 metal gun barrels. They faithfully replicate the triple 46cm gun turrets found on the Japanese Yamato Battleship. Each barrel has a hollow muzzle and be quickly and easily installed on the Yamato model kit and therefore eliminating the kit standard plastic components. This set also includes aluminum projectiles (20 pieces) to replicate Type 91 armor piercing shells

More
1:350 WWII Ger. Battleship Bismarck

1:350 scale

1:350 WWII Ger. Battleship Bismarck

€75.99

1/350 Bismarck

More
1:350 Yamato Wooden-Deck Sheet

1:350 scale

1:350 Yamato Wooden-Deck Sheet

€27.99

Article number: 300012645 Product: 1:350 Yamato Wooden-Deck Sheet This set of deck sheets allows easy and beautiful reproduction of the wooden deck on Item 78025 1/350 scale Japanese Battleship Yamato. This 2-piece sticker has been pre-cut to match the shape of Yamato’s deck for easy application. Deck plank pattern is also precisely printed so there is no need for painting.

More
1:48 Brit. Supermarine Spitfire Mk.I

1:48 scale

1:48 Brit. Supermarine Spitfire Mk.I

€38.99

Article number: 300061119 Product: 1:48 Brit. Supermarine Spitfire Mk.I The Supermarine Spitfire needs little introduction, one of the best-known aircraft deployed by the Royal Air Force in the Battle of Britain, as British and German forces struggled for control of the skies over the English Channel. The Mk.I had a streamlined form with elliptical wings designed for speed, and was powered by a Merlin engine. This legendary bird has received a complete makeover from Tamiya’s designers with new tooling for an updated and more accurate appearance in the 1/48 Aircraft Series! • 1/48 scale plastic model assembly kit. • Can be assembled to recreate many of the extensive Spitfire Mk.I variants. • Points of interest include superb detailing in areas such as the cockpit and panel lines. • Separate parts are used to recreate main landing gear and horizontal stabilizers. • Comes with 1 figure depicting a seated pilot. • Photo-etched parts are included to recreate radiator, oil cooler, gun sight, seatbelt components and more! • 3 marking options.

More
1:48 Diorama-Set Jerry Can&Barrel

1:48 scale

1:48 Diorama-Set Jerry Can&Barrel

€10.99

Article number: 300032510 Product: 1:48 Diorama-Set Jerry Can&Barrel Originally used by the Germans, Jerry cans Ewere soon used by the Allies as well to transport fuel and water. Set includes drum cans, Jerry cans, bags and other equipment for use with 1/48 MMV series models. Comes with both Allied and German versions.

More
1:48 Fairchild Republic A-10A Thunder.II

1:48 scale

1:48 Fairchild Republic A-10A Thunder.II

€34.99

Article number: 300061028 Product: 1:48 Fairchild Republic A-10A Thunder.II About the Fairchild Republic A-10A "Thunderbolt II" The need for close air support, on small pin point targets, was recognized early during the Vietnam conflict. Following an experimental development program begun in the early 1970's, the Fairchild Republic Industries A-10 Thunderbolt II was selected for production. The performance characteristics demanded were for operation on unimproved short fields, both high and low airspeed maneuverability, easy maintenance, long loiter times and range, excellent pilot protection, and a capacity for large mixed weapons loads. The appearance of the A-10 is remarkable while its performance is amazing. Known affectionately as the "Wart Hog" by its pilots, it's a large single seat aircraft, identified by a pair of TF-34-100A high bypass fan jet engines mounted high near the rear of the twin tailed fuselage. A few of the specifications are: Length 53' 4"; height 14'8", span 57'6"; maximum gross weight 47,400lbs, including 16,000lbs of external stores. Internal armament is the GAU-8/A 30mm Gatling cannon capable of 2100 or 4200 rounds per minute. It carries 1350 rounds of ammunition, a fire control head-up display, CRT TV monitor, laser spot seeker plus a diversified armament panel that can facilitate any operational need. The A-10 has been around since 1972, and has again proven its worth during the recent Gulf war.

More
1:48 JGSDF Light Armored Vehicle

1:48 scale

1:48 JGSDF Light Armored Vehicle

€22.99

Article number: 300032590 Product: 1/48 JGSDF Light Armored Vehicle This is an assembly model of a modern day 4x4 light armored vehicle in Tamiya's ever growing 1/48 scale series. Manufactured for the JGSDF by Japanese firm Komatsu, the vehicle was first delivered to units from 2002 and provided an instant defensive upgrade from the armored vehicles it replaced. The ability to transport it by helicopter or aircraft enhances the JGSDF's mobility. Aside from the 5.56mm machine gun, it can also be fitted with a 12.7mm machine gun, or even anti-tank weapons. One of the more notable deployments of the vehicle was in the JGSDF's Iraq Humanitarian Assistance operation after the second Gulf War, and this model recreates the version updated based upon experience the JGSDF gained there. This assembly model kit is perfect for display with the 1/48 JGSDF Type 10 model kit (Item 32588)!

More
1:48 US Vought F4U-1A Corsair

1:48 scale

1:48 US Vought F4U-1A Corsair

€26.99

Article number: 300061070 Product: 1:48 US Vought F4U-1A Corsair About the Vought F4U-1A Corsair After enduring heavy losses to the Japanese Navy's Zero fighters in the early stages of the Pacific War, the U.S. Navy became focused on developing new fighters capable of turning the tides of aerial combat. Among those fighters was the Corsair, first developed to be a high speed, carrier borne aircraft. Built around the new Pratt & Whitney R-2800 2000hp engine, and turning the largest propeller ever attached to a fighter plane (4m dia.), this gull-winged wonder was destined to be a success. In June 1942, the F4U-1 production models made their maiden flight. However, due to their restricted forward field of view, and because of a propeller wash effect caused them to stall left wing first during low speed landings, they first were used as land based fighters. Succeeding the F4U-1 in the summer of 1943 was the F4U-1A, which was equipped with an extended rear wheel landing gear shaft, a slightly modified glazed canopy, and a small triangular strip of metal bolted to the right leading edge of the wing to equalize the stall and avoid the roll to the left at touch-down. Despite these improvements, the new F6F Hell Cat was adopted as the main carrier-borne aircraft, and the first combat Corsairs became relegated to land based US Marine squadrons in the South Pacific. Major Boyington and 2nd Lieutenant Hanson of the U.S. Marines, Lt. Kepford of the Navy and other ace-pilots, bravely flew the F4U-1A into fierce air-combats, overpowering the Japanese Zero fighters with tremendous top speed and six 12.7mm heavy machine guns.

More
1:6 Honda CB750F 1979

1:6 scale

1:6 Honda CB750F 1979

€95.00

Article number: 300016020 Product: 1/6 Honda CB750F 1979 This is a 1/6 scale plastic assembly kit model of the Honda CB750F, which quickly gained popularity after its release in 1979. ★The beautiful curved lines of the bike have been realistically reproduced. ★The air-cooled inline 4-cylinder 4-carburetor engine features detailed cooling fins and spark plug cables which are depicted with vinyl tubing. ★The metal front forks have a beautiful metal plated finish and coil springs that enable it to move. ★Exhausts also feature a smooth metal plated finish. ★In addition, side covers are removable to showcase the internal mechanisms even after assembly.

More
1/12 Honda Monkey 125

1:12 scale

1/12 Honda Monkey 125

€32.99

Article number: 300014134 Product: 1/12 Honda Monkey 125 This is a new entry into the famed 1/12 Motorcycle Series, as the all-new Honda Monkey 125 – which went on sale in mid-2018 – quickly joins the Tamiya line-up, too! The Monkey line was first sold in Japan in 1967, and soon gained long-lasting worldwide acclaim with its rather diminutive yet cheerful design. The Monkey 125 features a bigger 124cc engine, yet is packed with the Monkey’s trademark cheeky charm – chunky tires, rounded design motifs for headlight, speedo and more, plus gleaming chromed fenders and muffler cover. This playful little monkey looks set to be another worldwide hit, and now you can get your hands on it, in detailedTamiya 1/12! About the Model - This is a 1/12 scale plastic model assembly kit.   Length: 142mm, width: 63mm, height: 86mm. - The compact, quirky form of the Monkey 125 is captured with   superb accuracy. - Engine, swing arm, front fork and rear fender parts are secured   to the frame using screws for a durable finish. - Metal-plated parts are used to depict fenders and light cases. - Depictions of the chunky tires are dedicated parts for this model. - Comes with clear parts, damper springs, vinyl tubing to recreate   various lines, and of course decals to recreate markings.

More
1/12 Porsche 934 Jaeger

1:24 scale

1/12 Porsche 934 Jaeger

€138.00

Article number: 300012055 Product: 1/12 Porsche 934 Jaegermeister This is a re-issue of our classic kit, now with new slick tire parts! From 1976, the commercially sold race car Porsche Turbo RSR was used in World Sportcar Championship races. As it was to be used in Group 4 GT class and the 930 Turbo was its base, it was called the 934. Its 2,993cc flat-6 turbo-charged engine thumped out an impressive 485hp with 62kg/m of torque. Approximately fifty 934s had been manufactured by May 1977, one of them having gone to the Max Moritz team with an eye-catching orange livery matching the image of their main sponsor German liquor maker Jägermeister. In 1976 season, the Max Moritz team came 4th in the International Championship for Manufacturers, both cars showing great competitiveness throughout the season. About the Model • This is a 1/12 scale plastic assembly model kit.    Length: 360mm, Width: 168mm. • This re-issued version of the kit features new slick tires. • The impressive form of parts such as the large-sized    front bumper spoiler and the widened over fender are    accurately reproduced. • Left and right doors and front and rear hoods are openable. • All of the flat-6 turbo engine's cables, cords, and piping provide    a top quality finish. • The rack & pinion arrangement enables moveable front wheels    linked with the steering wheel. • Moveable front and rear suspension features coil spring dampers. • The Porsche's spartan interior with roll-cage is precisely reproduced. • Photo-etched parts depict brake discs, catch pins, side radiator,    and seatbelt for the ultimate finish. • Sponsor and car number decals are produced by Cartograf.

More
1/12 Porsche 935 Martini

1:12 scale

1/12 Porsche 935 Martini

€152.00

Article number: 300012057 Product: 1/12 Porsche 935 Martini Here is a welcome updated re-issue for this classic model (previously Item 12038) of a classic sports car, the Porsche 935 Martini, with new decals. The actual car was the World Championship for Makes winner in 1976; a highly tuned version of the road-going 930 Turbo, it had a 2,857cc engine that put out a magnificent 590hp, as well as race-tuned suspension.

More
1/24 TOYOTA GR Supra

1:24 scale

1/24 TOYOTA GR Supra

€39.99

Article number: 300024351 Product: 1:24 TOYOTA GR Supra The latest addition to the long-running 1/24 Sports Car Series is a stunner – Toyota’s brand new GR Supra, which joins its R/C cousin (Item 58674) in the Tamiya catalog. Upon its global announcement in January 2019, the TOYOTA GR Supra created a worldwide buzz. Designed with beautiful balance, it provides superlative handling and stable corners, while the sensuous long nose, short deck form has a striking double-bubble roof. Combined with impeccable power from a turbocharged inline-six or inline-four engine, the GR Supra is set to define the next generation of performance. • This is a 1/24 scale plastic model assembly kit. Length: 183mm, width: 85mm, height: 54mm. • The dynamic lines of the body are rendered with stunning accuracy. Bumper, A pillar, front grille and other parts are molded separately for a sharp finish. • Features console and dashboard, and seats with separate headrest components. • Can be assembled as Japan, U.S. or Europe spec, with dedicated left- and right-hand drive part positions. • A detailed underside shows off the exhaust system, plus multi-part front and rear suspension. • Features the 19-inch wheels exclusive to the top grade RZ car in Japan. They are two-part designs with separate metal-plated and black components. Tires have realistic tread. • Includes metal transfers, plus masking stickers for window areas.

More
1/24 Toyota Supra LBGP Marshal

1:24 scale

1/24 Toyota Supra LBGP Marshal

€32.99

Article number: 300024033 Product: 1/24 Toyota Celica Supra Long Beach GP Marshal Car This is a welcome re-issue of a classic kit from way back in 1983, which depicts a special version of the Celica Supra that was used as the marshal’s car in the 1982 Formula One race held in Long Beach, California, USA. Its tuned engine produced 230hp and a top speed of over 230km/h, and the car made for a thrilling sight as it bombed around the circuit, thanks to stylish overfenders and a sporty rear spoiler. About the Model • This is a 1/24 scale plastic model assembly kit. • The wedge-shaped body is recreated in style, with depictions of the roof-top lights, rear spoiler and exaggerated overfenders. • Dedicated decals include depictions of the side slogan and other markings. • Interior features details such as separate seat parts and center console with individual gearshift and parking brake components. • There is plenty to look at on the model underside, with separate depictions of the exhaust, front MacPherson and rear semi-trailing suspension setups. • A driver figure is also included to raise the level of detail. • The cover story for this model has been re-written, and now includes a French version not in the original. • Please note that this kit does not include parts for motorization or the Yamaha Beluga moped, which were in the original 1981 release.

More
1/35 Ger. Panther Ausf.D

1:35 scale

1/35 Ger. Panther Ausf.D

€53.99

Article number: 300035345 Procuct: 1/35 Ger. Panther Ausf.D The latest addition to the 1/35 Military Miniature Series depicts the German Panther, a WWII AFV developed by Germany to combat the mighty Russian T-34. Given the importance of stopping the T-34 as the Russians turned the tide in WWII, the Panther was a priority and this was emphasized by armored warfare guru Heinz Guderian's role in the design process. The Panther packed a powerful L/70 7.5cm gun (rumored to have taken out a T-34 at 3km) and combined it with excellent mobility and a 55km/h top speed. Just as importantly, it made great use of T-34-inspired sloped armor, up to 80mm in places. As things turned out, development of the Panther was rushed as the German situation worsened, and this led to severe reliability problems in engagements such as the Battle of Kursk in July 1943. Despite that, it proved offensively and defensively highly capable. The Ausf.D was the initial variant of the Panther; 842 were manufactured between January and September 1943. About the Model • This is a 1/35 scale plastic model assembly kit. • This completely newly-tooled kit captures the form of the Panther Ausf.D with sloped armor, and long 7.5cm gun. Tamiya designers studied a real Panther in the Netherlands to ensure stunning accuracy. • Ausf.D-specific features such as smoke dischargers and rear panel layout are authentically depicted. • Advanced slide molding techniques ensure that turret details are accurately rendered. • Belt type tracks give an effective finish and make for a smooth assembly process. • Commander torso figure plus full body crew figure included. 3 marking options include Battle of Kursk unit. • Three detail-up parts sets are available to further enhance the realism of your model.

More
1/35 German Tank Crew Set

1:35 scale

1/35 German Tank Crew Set

€17.99

Article number: 300035354 Product: 1/35 German Tank Crew Set This is a German tank crew figure set. The last German figure set was designed way back in 1996. This comprehensive set features 8 figures in highly realistic pose, that are adaptable to use with a multitude of WWII German armor kits.

More
1/35 Hummel Metal Gun Barrel

1:35 scale

1/35 Hummel Metal Gun Barrel

€10.99

Article number: 300012688 Product: 1/35 Hummel Metal Gun Barrel ★Add even more detail to your 1/35 scale model of the German Self-Propelled Howitzer Hummel (Late Production) with this piece! ★The barrel is made from turned aluminum, and even features fine rifling detail at the tip.

More
1/35 Sherman Easy8 EuroTheater

1:35 scale

1/35 Sherman Easy8 EuroTheater

€46.99

Article number: 300035346 Product: 1/35 Sherman Easy8 EuroTheater This is an all-new kit designed by Tamiya's top designers which recreates the "Easy Eight" variant of the legendary Sherman medium tank. The M4A3E8 was known fondly as the "Easy Eight" by its crews, thanks to the relatively smooth drive afforded by its Horizontal Volute Spring Suspension (HVSS). Another distinguishing feature was its 76mm gun. Some of the 2,500 examples produced were in time to appear in the Battle of the Bulge (Dec. 1944-Jan. 1945), and others even served in the Korean War years after the Allied WWII triumph. Movie buffs will no doubt also recall that the "Easy Eight" was the star of the 2014 hit film "Fury." THE TAMIYA-DESIGNED M4A3E8 KEY FEATURES Slide molded turret and upper hull parts give an unbeatable combination of hassle-free assembly and highly realistic detail levels. Cast metal turret and welded hull surface textures are rendered accurately. The rear showcases sharp, detailed molding on engine grilles and exhausts, as well as the numerous accessories depicted by the kit. Clear parts are used to recreate light lens and cupola vision block parts, further upping the realism of this kit. The single-pin T66 tracks are recreated with minimum fuss and great accuracy, by the included belt-type tracks. Drive sprockets feature fine holes. A commander figure in realistic pose is provided for the cupola. The periscope seen on the hatch underside is depicted using separate parts. Technical data: Scale: 1/35 Length: 214 mm Width: 86 mm

More
1/48 German Horch 1a

1:48 scale

1/48 German Horch 1a

€23.99

Article number: 300032586 Product: 1/48 German Horch 1a The Horch 1a was developed in accordance with the pre-WWII "Einheits Program," which aimed at streamlining vehicle production. The soft-top vehicle could carry 8 crew members, and had a V8 engine providing 80hp. It possessed a range of 400km, and was given an oversized radiator to help it battle on in tough environments such as North Africa. Another notable feature was the 120-liter fuel tank, split in two around the prop shaft. Around 2,900 were produced between 1937 and 1940; the Type 1a was used heavily in the early stages of WWII.

More
1/48 JGSDF Type 16 MCV

1:48 scale

1/48 JGSDF Type 16 MCV

€28.99

Article number: 300032596 Product: 1:48 JGSDF MCV Type 16 (8x8) (1) This scale model assembly kit recreates the Japan Ground Self Defense Force (JGSDF) Type 16, which reached units beginning in 2017. An 8-wheel vehicle, the JGSDF classify it as a Maneuver Combat Vehicle (MCV), a highly mobile and well-armed vehicle intended to provide supporting fire and take on enemy armor as a part of rapid response units. Its domestically designed L/52 105mm rifled gun is a low-recoil piece with perforated muzzle brake and a fire control system to enable accurate firing on the move. Rolled steel turret and hull employ modular and spaced armor estimated to be able to survive frontal hits from 20-30mm class guns and portable anti-tank weapons. Thanks to its 570hp engine, the 26-ton Type 16 has a top speed of around 100km/h and significant range; it looks set to provide a major boost to JGSDF units as its rollout continues. • 1/48 scale plastic model assembly kit. Length: 176mm, width: 63mm. Model has a dedicated parts breakdown for a hassle-free build without sacrificing accuracy. • An accurate rendering is based upon extensive research of the actual Type 16, authentically capturing the modern silhouette with a moving depiction of the 105mm gun. • Features crisp molding on details such as non-slip surfaces, plus multi-piece machine gun and mount. • The 8-wheel suspension is depicted in style, with fixed wheels. Elastomer tires have a realistic tread pattern. • Decals are included to recreate periscope openings and muzzle brake perforations. • Comes with one commander figure and two marking options.

More
1/6 Link-Type Motorcycle Chain

1:6 scale

1/6 Link-Type Motorcycle Chain

€41.99

Article number: 300012674 Product: 1/6 Link-Type Motorcycle Chain This assembly-type 1/6 scale chain is designed to go with the 1/6 scale Honda CRF1000L Africa Twin model kit. It promises to add an extra level of unbelievable detail to your masterpiece. •Includes individual assembly chain links consisting of individual plastic plates and metal spacers. •The completed chain will fit neatly onto the drive sprocket in Item 16042 Honda CRF1000L Africa Twin. •Includes a handy jig which aids construction. •Parts included in Item 16042 allow adjustment of the chain tension when it is fitted to the model.

More
1:10 RC Alfa Rom. Giulia Sprint GTA M-06

RC on-road

1:10 RC Alfa Rom. Giulia Sprint GTA M-06

€171.00

Article number: 300058486 Product: 1:10 RC Alfa Rom. Giulia Sprint GTA M-06 This R/C model assembly kit recreates the classic Alfa Romeo Giulia Sprint GTA in racing form. The body sits atop Tamiya’s proven gearbox-driven 2WD, rear-drive M-06 chassis, which is at home on asphalt surfaces. The M0-6 chassis platform utilizes a rear motor and rear wheel drive set-up. The layout also features a longitudinally-mounted battery with the R/C radio gear positioned on either side of the chassis. The 4-wheel double wishbone suspension is paired with rear 60D Super Grip Radial tires for improved rear traction and drivability.   Warning! Not suitable for children under 14 years.

More
1:10 RC Audi Quattro A2 (TT-02)

RC on-road

1:10 RC Audi Quattro A2 (TT-02)

€143.00

Article number: 300058667 Product: 1:10 RC Audi Quattro A2 (TT-02) Here comes the latest new entry into the line-up of models on the adaptable and easy-driving TT-02 chassis. It recreates the Audi Quattro A2, which graced the 1983 WRC scene from midway through the season, contributing to driver Hannu Mikkola’s eventual Drivers’ Championship. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 458mm, width: 187mm. • The classic quattro A2 body is molded accurately in lightweight and durable polycarbonate. • Features separate metal-plated ABS parts for front and rear light cases, plus fog lamps. Side mirrors, wing and wing caps are molded in white ABS. • Please note that light cases are compatible with separately sold LEDs; fog lamps are not. • 5-spoke wheels are molded in silver, and paired with racing radial tires. • The TT-02 chassis is an adaptable and balanced design with excellent stability, plus features such as identical suspension arm and upright components for ease of assembly. • 4-bevel differential gears and 4-wheel double wishbone suspension make for a smooth ride. • An extensive TT-02 option parts line-up offers a number of opportunities to tune your car.

More
1:10 RC Citroen 2CV Rally (M-05Ra)

RC on-road

1:10 RC Citroen 2CV Rally (M-05Ra)

€185.00

Article number: 300058669 Product: 1:10 RC M-08 Chassis Kit The long-running and popular M-Chassis series welcomes a new member with the M-08 Concept chassis, which employs a midship motor, rear-wheel drive layout for superior rear traction, plus a main frame split into front and rear sections. About the Model • This is a 1/10 scale R/C model assembly kit. • The chassis is split into front (suspension and servo) and rear (motor and battery) sections. It can be assembled into three different wheelbases: S (210mm), M (225mm) or L (239mm). • Rear-midship motor powers rear wheels via a differential in the MR setup. • Oil-filled differential gear is the TA06 design, which was also employed on the M-07 Concept chassis. • Features proven M-07 Concept designs: suspension arms, uprights, suspension mounts and aluminum parts. • Includes CVA oil dampers, universal drive shafts, full ball bearings and hi-torque servo saver. • Comes with new front suspension mounts (0 degrees) and hub carriers (2 degrees) for a total caster angle of 2 degrees, and smooth cornering. • Compatible with M-06 Chassis bodies. • Compatible with M-07 Concept Hop-Up Option parts such as Aluminum Rear Suspension Mount (Skid Angle Adjustment) (54787), Aluminum Rear Uprights (54781) and Low-Friction King Pin Pipes (54813).

More
1:10 RC Ford Mustang GT4 (TT-02)

RC on-road

1:10 RC Ford Mustang GT4 (TT-02)

€138.00

Article number: 30058664 Product: 1:10 RC Ford Mustang GT4 (TT-02) Inspired by the Ford Shelby GT350R-C, the Ford Mustang GT4 was designed to compete in GT4 category racing across the world. Powered by a 5.2-liter V8, and sporting a 6-speed sequential paddle shift transmission, Multimatic suspension and aerodynamically refined body, the Mustang GT4 cuts a thrilling figure. Now, it makes a triumphant entrance into the Tamiya range of R/C models. The TT-02 chassis is adaptable and fun to drive – a great choice to get started with R/C touring cars! About the Model • This is a 1/10 scale R/C model assembly kit. Length: 459mm. • The muscular form is captured in polycarbonate, and was designed with access to the actual car’s CAD data for superb accuracy. Front and rear light cases are also molded in polycarbonate. • Wheel arches are pre-cut out for a simpler body assembly experience. • The beginner-friendly, highly adaptable TT-02 is a versatile and easy to maintain shaft-driven 4WD chassis. • Separately molded plastic components depict rear wing and side mirrors. • Racy 10-spoke wheels are molded in gun metal and paired with slick tires. • Stickers are included to create an original livery, as are masking stickers for use when painting. • An extensive TT-02 option parts line-up offers a number of opportunities to tune your car.

More
60 of 2919 Items