5 22

Sort by:

Top sellers
  • Top sellers
  • New
  • Price ascending
  • Price descending
Filter

Filter
Price
Category
Brand
Brands & licenses
Scale
1:12 RC X-SA Lunch Box

RC off-road

1:12 RC X-SA Lunch Box

€190.00

Article number: 300046701 Product: 1:12 RC X-SA Lunch Box The first classic Tamiya model to join the brand new X-SA series is the Lunch Box, favored basher of many an R/C fan and offering an all-around fun 2WD drive on those iconic bulging tires! About the Model • This is a 1/12 scale finished R/C model. Length: 385mm, width: 290mm, height: 225mm. Wheelbase: 207mm. • The classic Lunch Box body is molded in styrene plastic in the original yellow, with the now legendary markings already applied. • Yellow wheels are paired with 115mm tires for some serious off-road capacity. • The durable and easy-to-assemble 2WD chassis features a box type frame with front swing arm independent and rear rolling rigid suspension setups. • A pre-assembled, sealed gearbox protects the diff gear from sand and other intruding debris. • Features a rear wheelie bar for wild wheels-in-the-air driving. • Requires separately sold R/C equipment, battery pack and charger.

More
1:10 RC Formula E Gen2 ChLivery TC01

RC on-road

1:10 RC Formula E Gen2 ChLivery TC01

€280.00

Article number: 300058681 Product: 1:10 RC Formula E Gen2 ChLivery TC01 • This is a 1/10 scale R/C racing chassis kit. Length: 370mm, width: 187mm, wheelbase: 257mm. • Adjustable suspension mounts and plastic bushings allow fine tuning of roll center, toe and skid angle settings. • High performance Super Short Big Bore Dampers give super-responsive handling and great corner speed. They are equipped with the latest reinforced V parts, 5.8mm ball connectors and damper caps for truly optimized performance. • Dedicated carbon fiber front-center stiffener elevates pitch rigidity without sacrificing roll flex, for improved front grip and cornering.. • Includes a dedicated new servo mount component. • Integrated stabilizer end and 5mm adjuster parts are used on the new soft front and rear stabilizers. • Aluminum steering bridge and pivot mounts allow fine tuning of steering Ackerman. • Comes in a handy and stylish carry case package. • Please note that motor, tires and R/C equipment are sold separately. Dedicated Components: Carbon front center stiffener Aluminum stiffener mount TA07RR servo mount Soft stabilizers (front & rear)

More
1:10 Rc Plasma Edge II GM (TT-02B)

RC buggys

1:10 Rc Plasma Edge II GM (TT-02B)

€147.00

Article number: 300047446 Product: 1:10 Rc Plasma Edge II GM (TT-02B) Tamiya is delighted to announce another production of Item 47446, which is based upon the TT-02B buggy chassis featuring superb accessibility and high rigidity. The eye-catching pre-cut body is pre-painted in PS-23 Gun Metal, which is a popular color among R/C fans! Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

More
1:10 RC MB G-Class G500 (CC-02)

RC off-road

1:10 RC MB G-Class G500 (CC-02)

€266.00

Article number: 300058675 Product: 1:10 RC MB G-Class G500 (CC-02) Get ready for a newcomer to the Tamiya off-road chassis line-up – the CC-02 is here! Even better, its first model comes with a brand new body that depicts the Mercedes-Benz G 500, a 2018 addition to the German auto giant's legendary G Class that was powered by a 4-liter V8 twin turbo engine. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 455mm, width: 196mm, height: 207mm. Wheelbase: 267mm. • TLU-01 LED Light Unit and LEDs are included for export only! LED attachment parts are also included. • The boxy form of the G 500 is recreated accurately in polycarbonate, with separately molded parts included for the front grille, side mirrors and spare tire cover. • Designed for a wide range of off-road scenes including rocky terrain, the CC-02 chassis’ ladder frame is inspired by full-size vehicles and is the base for its superior durability. • A 4WD setup employs the motor longitudinally behind the front axle, with separated gearbox and transfer case, and propeller shafts transmitting power to the differential gears front and rear. • Twenty gear ratios between 11.09:1 and 29.28:1 are possible using separately sold pinion gears, for some serious fine-tuning! • 4-link rigid suspension is employed front and rear, with CVA oil dampers. See over the page for a more detailed introduction to the CC-02!

More
1:10 RC MB Unimog 406 U900 (CC-02)

RC off-road

1:10 RC MB Unimog 406 U900 (CC-02)

€266.00

Article number: 300058692 Product: 1:10 RC MB Unimog 406 U900 (CC-02) • This is a 1/10 R/C model assembly kit. Length: 384mm, width: 196mm, height: 224mm. Wheelbase: 242mm. • The distinctive form of the Unimog is accurately depicted in durable polycarbonate, with separate parts included for side mirrors and fuel tank, plus a metal-plated front grille and emblem. • Includes block pattern tires, and red ABS wheels with a depiction of bead lock designs. • Propeller shafts (short: 76mm) are also included. • The CC-02 chassis is designed for a wide range of off-road scenes including rocky terrain, and its ladder frame is inspired by full-size vehicles and is the base for its superior durability. • A 4WD setup employs the motor longitudinally behind the front axle with separated gearbox and transfer case, and propeller shafts transmitting power to the differential gears front and rear. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

More
1:10 RC XV-01 Lancia Delta HF Integrale

RC on-road

1:10 RC XV-01 Lancia Delta HF Integrale

€257.00

Article number: 300058569 Product: 1:10 RC XV-01 Lancia Delta HF Integrale The Lancia Delta Integrale, which has made a number of appearances on various chassis over the years, now comes on the XV-01 chassis. Rally fans are sure to have fond memories of this legendary rally warrior, which won 6 titles back-to-back at the end of the 1980s and start of the 1990s. About the Model • This is a 1/10 scale R/C assembly kit. • The body is recreated faithfully in polycarbonate. • The XV-01 chassis features front-motor belt-driven 4WD. • Metal-plated side mirrors and grille come as separate parts. • The car is appropriately fitted with Rally Block tires, on white wheels. • Type 540 Motor included.   Warning! Not suitable for children under 14 years.

More
1:16 RC Panzer Königstiger Full Option

RC tanks

1:16 RC Panzer Königstiger Full Option

€584.00

Article number: 300056018 Product: 1/16 RC Panzer Königstiger Full Option Tamiya continues to develop its 1/16 R/C Tank Series. The fourth full-option kit to make its appearance is the German Heavy Tank King Tiger. Not only can the model move forward and backward and turn with a great sense of power, but the turret can be rotated and the 88mm gun raised and lowered. To imitate the firing of the main gun and of front machine gun, light flashes while sound is heard. The sound of the engine has been recorded, with the assistance of the French museum of Saumur, from a real Maybach HL230-P30 engine of the only King Tiger kept in working condition in the world. Not only all stages of engine sound (idling through full throttle) but also all the metallic clanking of the tank tracks have been thoroughly recorded. During the second half of WWII, Zimmerit coating was applied on German tanks to protect them from the threat of magnetic mines. For this kit, the Zimmerit coating has been replicated with a unique relief printed seal. Thanks to this seal, you can now represent accurately a late war King Tiger with great ease. About the German King Tiger (Henschel Turret) The German Heavy Tank King Tiger made its appearance during WWII in 1944. The chassis front armor was 150mm thick with 80mm thick side armor and powered by a 700hp Maybach HL230-P30 engine. The Henschel and Porsche companies came up with rival turret prototypes. The first 50 tanks produced had Porsche turret whereas subsequent tanks were equipped with the Henschel designed production turret that featured many improvements over the first model. The King Tiger was armed with a 71-caliber 88mm gun that had enough power to pierce 150mm thick armor from 2000m away. Between The beginning of production in Summer 1944 and March 1945, 440 units were completed. Due to the havoc wreaked by the King Tiger during the final German offensive on the Ardennes front in December of 1944 R/C KING TIGER w/Option Kit   Warning! Not suitable for children under 14 years.

More
1:10 RC Alfa Rom. Giulia Sprint GTA M-06

RC on-road

1:10 RC Alfa Rom. Giulia Sprint GTA M-06

€171.00

Article number: 300058486 Product: 1:10 RC Alfa Rom. Giulia Sprint GTA M-06 This R/C model assembly kit recreates the classic Alfa Romeo Giulia Sprint GTA in racing form. The body sits atop Tamiya’s proven gearbox-driven 2WD, rear-drive M-06 chassis, which is at home on asphalt surfaces. The M0-6 chassis platform utilizes a rear motor and rear wheel drive set-up. The layout also features a longitudinally-mounted battery with the R/C radio gear positioned on either side of the chassis. The 4-wheel double wishbone suspension is paired with rear 60D Super Grip Radial tires for improved rear traction and drivability.   Warning! Not suitable for children under 14 years.

More
1:10 RC Audi Quattro A2 (TT-02)

RC on-road

1:10 RC Audi Quattro A2 (TT-02)

€143.00

Article number: 300058667 Product: 1:10 RC Audi Quattro A2 (TT-02) Here comes the latest new entry into the line-up of models on the adaptable and easy-driving TT-02 chassis. It recreates the Audi Quattro A2, which graced the 1983 WRC scene from midway through the season, contributing to driver Hannu Mikkola’s eventual Drivers’ Championship. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 458mm, width: 187mm. • The classic quattro A2 body is molded accurately in lightweight and durable polycarbonate. • Features separate metal-plated ABS parts for front and rear light cases, plus fog lamps. Side mirrors, wing and wing caps are molded in white ABS. • Please note that light cases are compatible with separately sold LEDs; fog lamps are not. • 5-spoke wheels are molded in silver, and paired with racing radial tires. • The TT-02 chassis is an adaptable and balanced design with excellent stability, plus features such as identical suspension arm and upright components for ease of assembly. • 4-bevel differential gears and 4-wheel double wishbone suspension make for a smooth ride. • An extensive TT-02 option parts line-up offers a number of opportunities to tune your car.

More
1:10 RC Citroen 2CV Rally (M-05Ra)

RC on-road

1:10 RC Citroen 2CV Rally (M-05Ra)

€185.00

Article number: 300058669 Product: 1:10 RC M-08 Chassis Kit The long-running and popular M-Chassis series welcomes a new member with the M-08 Concept chassis, which employs a midship motor, rear-wheel drive layout for superior rear traction, plus a main frame split into front and rear sections. About the Model • This is a 1/10 scale R/C model assembly kit. • The chassis is split into front (suspension and servo) and rear (motor and battery) sections. It can be assembled into three different wheelbases: S (210mm), M (225mm) or L (239mm). • Rear-midship motor powers rear wheels via a differential in the MR setup. • Oil-filled differential gear is the TA06 design, which was also employed on the M-07 Concept chassis. • Features proven M-07 Concept designs: suspension arms, uprights, suspension mounts and aluminum parts. • Includes CVA oil dampers, universal drive shafts, full ball bearings and hi-torque servo saver. • Comes with new front suspension mounts (0 degrees) and hub carriers (2 degrees) for a total caster angle of 2 degrees, and smooth cornering. • Compatible with M-06 Chassis bodies. • Compatible with M-07 Concept Hop-Up Option parts such as Aluminum Rear Suspension Mount (Skid Angle Adjustment) (54787), Aluminum Rear Uprights (54781) and Low-Friction King Pin Pipes (54813).

More
1:10 RC Ford Mustang GT4 (TT-02)

RC on-road

1:10 RC Ford Mustang GT4 (TT-02)

€138.00

Article number: 30058664 Product: 1:10 RC Ford Mustang GT4 (TT-02) Inspired by the Ford Shelby GT350R-C, the Ford Mustang GT4 was designed to compete in GT4 category racing across the world. Powered by a 5.2-liter V8, and sporting a 6-speed sequential paddle shift transmission, Multimatic suspension and aerodynamically refined body, the Mustang GT4 cuts a thrilling figure. Now, it makes a triumphant entrance into the Tamiya range of R/C models. The TT-02 chassis is adaptable and fun to drive – a great choice to get started with R/C touring cars! About the Model • This is a 1/10 scale R/C model assembly kit. Length: 459mm. • The muscular form is captured in polycarbonate, and was designed with access to the actual car’s CAD data for superb accuracy. Front and rear light cases are also molded in polycarbonate. • Wheel arches are pre-cut out for a simpler body assembly experience. • The beginner-friendly, highly adaptable TT-02 is a versatile and easy to maintain shaft-driven 4WD chassis. • Separately molded plastic components depict rear wing and side mirrors. • Racy 10-spoke wheels are molded in gun metal and paired with slick tires. • Stickers are included to create an original livery, as are masking stickers for use when painting. • An extensive TT-02 option parts line-up offers a number of opportunities to tune your car.

More
1:10 RC Lancia Delta HF Integrale TT-02

RC on-road

1:10 RC Lancia Delta HF Integrale TT-02

€157.00

Article number: 300058570 Product: 1:10 RC Lancia Delta HF Integrale TT-02 The Integrale will also be available on Tamiya’s versatile new TT-02 chassis, which is suited to a wide range of drivers’ abilities. About the Model • This is a 1/10 scale R/C assembly kit. • Kit includes FREE BONUS PARTS (Item 53156 Hard Inner Sponge Set) which are for EXPORT ONLY and are subject to the FIRST PRODUCTION. • The model’s polycarbonate body accurately recreates that of the real rally car. • The shaft driven 4WD TT-02 is a highly versatile and easy-to-maintain chassis. • A wide range of option parts are becoming available to tune and customize TT-02 chassis machines. • The kit includes decorative and masking stickers. • Rally Block tires are fitted to stylish white wheels. • Type 540 Motor included.   Warning! Not suitable for children under 14 years.

More
1:10 RC Land Rover Defender 90 (CC-01)

RC off-road

1:10 RC Land Rover Defender 90 (CC-01)

€252.00

Article number: 300058657 Product: 1:10 RC Land Rover Defender 90 (CC-01) Another big name joins the world of Tamiya R/C: the Land Rover Defender is an enduring vehicle that traces its lineage back to the original Land Rover cars first released in the immediate post-WWII era. This model recreates an early version of the Defender 90 (so named on account of its wheelbase length), the shorter wheelbase variant of the car. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 457mm, width: 200mm, height: 214mm, wheelbase: 242mm. • The classic Defender 90 form is accurately captured by the polycarbonate body, with slide molding used for great detail such as rear panel surfaces. • Includes separately molded parts for grille, side mirrors, light cases and tire cover. • Compatible with 5mm-diameter LEDs (White) x2 for headlights and 5mm-diameter LEDs x6 for the rear. • Matte plated wheels are paired with realistic tires featuring authentic tread pattern. • Highly reliable CC-01 chassis features a full-time 4WD system and front double wishbone, rear 4-link rigid suspension equipped with 4 CVA oil dampers. • An expansive range of option parts is available to customize the CC-01 chassis.

More
1:10 RC Neo Fighter Buggy DT-03

RC off-road

1:10 RC Neo Fighter Buggy DT-03

€89.99

Article number: 300058587 Product: 1:10 RC Neo Fighter Buggy DT-03 The Neo Fighter Buggy is mounted on the easy to build DT-03 chassis platform. Intended as an easy-to-get-started model to encourage young drivers to enter the world of R/C, its intuitive yet tough design allows hassle-free assembly and gives less experienced users the opportunity to get to grips with R/C model composition and construction. DT-03 Chassis at a glance: The stylish slim-line form of this chassis stems from its lightweight yet durable monocoque frame, which features a longitudinally-positioned battery and the R/C equipment along the centerline for excellent balance. The combination of a long 287mm wheelbase and 4-wheel double wishbone suspension married to CVA oil dampers with long arms, allows the model to handle with stability on poor surfaces. Ribbed front and square spike rear tires provide ample grip, and the rear-positioned gearbox is sealed to protect from dust and dirt, with the built-in differential gear offering smooth cornering.   Warning! Not suitable for children under 14 years.

More
1:10 RC Opel Calibra V6 (TA02) 4WD

RC on-road

1:10 RC Opel Calibra V6 (TA02) 4WD

€176.00

Article number: 300047461 Product: 1:10 RC Opel Calibra V6 (TA02) 4WD • This is a 1/10 scale R/C model assembly kit. Length: 448mm, width: 185mm, height: 131mm. Wheelbase: 260mm. • The bulky 1990s form of the Calibra V6 is captured in style by a polycarbonate body, with separate parts recreating the side mirrors, wiper arms and rear wing. • The model utilizes the shaft-driven 4WD TA02 chassis, which is based around a durable bathtub frame. • Openable gearboxes house a front 3-bevel gear differential and rear ball differential. • The TA02 features 4-wheel double wishbone suspension and CVA dampers for smooth, responsive handling. • White mesh type wheels are paired with slick tires. • Included in the kit are two big sticker sheets to recreate the various sponsors and other markings, plus masking stickers for use in the paint job.

More
1:10 RC TA07 PRO Chassis Kit

RC on-road

1:10 RC TA07 PRO Chassis Kit

€276.00

Article number: 300058636 Product: 1:10 RC TA07 PRO Chassis Kit The TA series of mid-range touring car chassis has been running since 1991, and is a great option for racers, plus those ready to take the step up from entry level chassis such as the TT model series. Now it receives an update with this brand new model - the TA07 PRO chassis, which is the first new-number variant since the TA06 in 2011. It utilizes a new composite layout, fused with proven part designs from the top-class TRF419 chassis suspension. As a result, the chassis features highly optimized flex characteristics, plus tried and trusted drivetrain parts in a fresh 1 belt-driven setup. Featured Parts: TRF419 design Uprights TRF419 design Suspension Arms TRF419 design Gear Differential Units TRF Dampers Universal Drive Shafts About the Model • This is a 1/10 scale R/C chassis assembly kit. Uses a composite lower deck/upper frame setup, as opposed to the TA06's monocoque. Lower deck and side frame parts are integrated, while upper frame center brace and F/R stiffener parts are separate.

More
1:10 RC Toyota 4x4 Pick Up Bruiser 2012

RC off-road

1:10 RC Toyota 4x4 Pick Up Bruiser 2012

€736.00

Article number: 300058519 Product: 1:10 RC Toyota 4x4 Pick Up Bruiser 2012 This electric R/C assembly kit reproduces the 4WD Toyota Hilux Pick-Up (RN36), which enjoyed wide popularity in the US and Japan during the 1980s and is still adored by many fans today. The model features a ladder frame like the actual vehicle, Type 540 motor, 3-speed transmission, and an abundance of metal parts for a high level of realism. Its live axle suspension features metal axle housings, leaf springs, and oil dampers while a metal front under guard helps the model take on tough off-road conditions. A highly detailed injection-molded body and large 123mm diameter tires also gives the model a stylish, high-lift appearance. About the Toyota Hilux Pick-Up  The 3rd generation Toyota Hilux Pick-up (30/40 Series) debuted in 1978 and the RN36 model was developed specifically for export markets. It featured a sporty, lightweight body and was powered by a 98hp 1,968cc 4-cylinder gasoline engine. Furthermore, its live axle suspension featured front leaf spring shackles located towards the rear to provide sufficient approach/departure angles for superb off-road performance. Front/rear flared fenders and large tires gave the truck a tall, aggressive stance. The RN36 model was mainly exported to North America but was also later sold in Japan, and there are still many fans of this pick-up to this day. Necessary accessories: - 4-channel R/C unit with ESC  - Battery Pack & Charger - Batteries for transmitter   Warning! Not suitable for children under 14 years.

More
1:10 RC Toyota Tundra HighLift 3-Speed

- 25%

RC off-road

1:10 RC Toyota Tundra HighLift 3-Speed

€400.00

€535.00

Article number: 300158415 Product: RC Toyota Tundra HighLift 3-Speed The Tundra is a full-size pick-up truck made by Toyota for the North American market. In 2007, the Tundra underwent a model change, and this is a 1/10 R/C assembly kit of the double cab version of this second generation Tundra. The model features a ladder frame chassis just like the actual truck, and is also equipped with a 3-speed transmission and shaft-driven 4WD system. Many metal parts such as the ladder frame, leaf springs, and friction dampers provide a unique assembly experience while the injection-molded body shell and large diameter tires accurately reproduce the high-lift's imposing appearance. Futhermore, parts such as a roll bar, grille guard, and roof carrier with 2 snowboards are included to let you customize your ride. Add separately available LED lights for an even higher level of realism. ● Length: 500mm, Width: 216mm, Height: 238mm, Weight: Approx. 3.1kg. ● Motor: Type RS540 ● Drivetrain: Shaft-driven 4WD ● Diff. Gear: Front/Rear 2-bevel Diff. ● Suspension: Fron/Rear Leaf Rigid ● Dampers: Front/Rear Friction Dampers ● Gear Ratios: 1:64.39 (Low), 1:35.20 (2nd), 1:21.14 (Top) ● Speed Controller: ESC   Warning! Not suitable for children under 14 years.

More
1:10 RC X-SA Racing Fighter (DT-03)

- 20%

RC buggys

1:10 RC X-SA Racing Fighter (DT-03)

€120.00

€150.00

Art.Nr.: 300046702 Product: 1:10 RC X-SA Racing Fighter (DT-03) Another new subject joins the new X-SA series, and it’s a modern classic: the Racing Fighter (original kit was Item 58628). The model is based upon the stylish, slimline DT-03 chassis. About the Model • This is a 1/10 scale finished R/C model. Length: 400mm, width: 244mm, height: 134mm. • Polycarbonate body and wing are pre-cut and pre-painted, with marking stickers applied. • Ribbed front and square spike rear tires ensure an accomplished off-road drive. • The DT-03 uses a tough monocoque frame. Big wheelbase (287mm) and tread (front: 221mm, rear: 208mm) measurements give it great performance on- and off-road! • Front arms have 25-degree skid angle for great off-road driving. • Features a sealed rear gearbox with internal gear differential unit, plus a dust cover for R/C equipment. • A wide range of option parts is available to tune and customize your DT-03 chassis car. • Requires separately sold R/C equipment, servo, battery pack and charger.

More
1:14 Multi-function Unit MFC-03

RC trucks

1:14 Multi-function Unit MFC-03

€380.00

Article number: 300056523 Product: 1/14 Multi-function Unit MFC-03 The popular Multi-Function Control (MFC) unit for R/C tractor trucks, which adds a whole extra layer of realism to driving, receives an update. This unit allows transmitter trim levers to be combined with stick control use, meaning you can enjoy lights, sounds and vibrations coordinated with actions while driving your R/C tractor truck model. This version of the MFC features engine sounds which were recorded from a real European truck's L6 diesel engine for amazing realism. About the MFC-03 • Features 33 different types of sound, including engine ignition and shutdown, horn, gear changes, brakes, air sound effects and so on. A 60mm-diameter full-range speaker in a resin case provides excellent quality. • Up to 21 actions can be controlled using a 4-channel transmitter. • Light operation and volume adjustment are also possible using the transmitter. • Includes white, red and yellow high brightness LEDs to duplicate truck HID lights with precision. • An ESC has been built in to the unit, enabling realistic running at very low speeds. • The MFC unit can be run in three modes: R/C mode with Multi-Function (lights and sounds) off; Multi mode, with R/C and multi-function on; Demo mode, which allows display of lights and sounds only. • Can be used for support leg operation when employing Item 56505 Motorized Support Legs. • Cannot be used together with Item 53909 TLU-01 or Item 53937 TLU-02. • Requires separately sold 4ch transmitter with slide trims, 4ch receiver and 2 servos (3 if using Item 56505) .

More
1:14 RC 3-Axle-ReeferSemi Trailer Kit

RC trucks

1:14 RC 3-Axle-ReeferSemi Trailer Kit

€451.00

Article number: 300156319 Product: 1/14 RC 3-Axle-ReeferSemi Trailer Kit Owners of Tamiya's 1/14 R/C trucks have been calling for a 3-axled trailer to better recreate the load outs of trucks in their respective countries. We are now proud to present this brand new 3-axle Reefer (Refrigerated) Semi-Trailer to further distinguish our unique lineup of R/C truck products.   Warning! Not suitable for children under 14 years.

More
1:14 RC 40ft.Container Semi-Trail.Maersk

RC trucks

1:14 RC 40ft.Container Semi-Trail.Maersk

€470.00

Article number: 300056326 Product: 1/14 RC 40ft.Container Semi-Trailer Maersk Cargo containers are used for shipping products and raw materials all around the world and ISO. This is a replica of a 40ft. regular height container which can be connected to any Tamiya's 1/14 scale Tractor Trucks.     Warning! Not suitable for children under 14 years.

More
1:14 RC Grand Hauler (Matte Black)

RC trucks

1:14 RC Grand Hauler (Matte Black)

€451.00

Article number: 300056356 Product: 1:14 RC Grand Hauler (Matte Black) This is a special edition of Item 56344 Grand Hauler, the iconic North American big rig announced in 2015. It is a great option for those without the time or confidence to apply a paint job to their kit, as the body, H, P, and Q14/Q15 parts of the kit are pre-painted Metallic black (Tamiya Color TS-40), and – in a first for the 1/14 R/C Tractor Truck series - given a matte coating which provides a cool look and protection from damage. About the Model • This is a 1/14 scale R/C model assembly kit. Length: 692mm, Width: 192mm, height: 330mm. • The boxy, customized Grand Hauler form is a real eye-catcher. Body, H, P, and Q14/Q15 parts are molded in black, pre-painted in Metallic black (TS-40), and given a matte urethane top coat for a stunning finish. • The matte paint job adds further emphasis to the numerous metal-plated parts, which include bumpers, radiator grille, roof-top horn and light bezel parts, side and kerb mirrors, air cleaners, mufflers and more! • The tried and tested Tamiya 3-axle chassis utilizes a tough ladder frame with aluminum side channels and resin cross members. A realistic drivetrain setup sees the front mounted motor powering twin rear axles. • 3-speed transmission can be controlled via a separately sold 4ch R/C transmitter. • Metal leaf spring dampers with built-in coil springs provide durable suspension. • Coupler is included to enable connection with any currently available Tamiya 1/14 scale trailer. • Compatible with separately-sold Multi-Function Control Unit MFC-01 (Item 56511) (or MFC-03, Item 56523) for realistic LED lights and sounds.

More
1:14 RC Knight Hauler Kit

RC trucks

1:14 RC Knight Hauler Kit

€437.00

Article number: 300156314 Product: 1/14 RC EU Truck Volvo FH12 Globetrotter 420 Kit The FH series was released in the fall of 1993 and became Volvo's primary truck. The following year, it was awarded the prestigious "Truck of the Year" title. It's huge 12-liter inter cooled turbo diesel engine is known as the "Euro 2", and is the result of state-of-the-art engineering technology. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

More
1:14 RC SCANIA R470 Highline 4x2 Kit

RC trucks

1:14 RC SCANIA R470 Highline 4x2 Kit

€361.00

Article number: 300156318 Product: 1/14 RC EU Truck Scania R470 Highline Kit It has been a long time in coming, but Tamiya has heard the demand from fans around the world and is now proud to present award-winning truck maker Scania's state-of-the-art R470 Highline as the newest addition to our unique 1/14 scale R/C tractor truck series. About the Scania R470 Highline Swedish manufacturer Scania has a long history of producing exceptional trucks designed for long-haul transport. The company's R-series made its debut in 2004 and quickly built a highly favorable reputation that led to it being given the prestigious International Truck of the Year award in 2005. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

More
1:16 RC Panzer Tiger 1 Full Option

RC tanks

1:16 RC Panzer Tiger 1 Full Option

€584.00

Article number: 30006010 Product: 1/16 RC Panzer Tiger 1 Full Option Tamiya has put incredible power and versatility of the German Tiger I in your fingertips with this 1/16 scale, fully functional R/C tank. Just some of the many functions this tank is capable of have been recorded in the video clips below. First check out the firing of the main cannon, complete with true to life flash and cannon recoil. The shot is so powerful that it actually causes the tank itself to recoil, just like the full size Tiger I. Then, click on the next image to see the cannon rotate, tracking down the enemy and preparing to fire. Next is the firing of the authentically recreated 7.92mm MG34 machine gun! Finally, take a gander at how the Tiger I moves on its durable resin and metal tracks. *1/16 scale Radio Controlled Assembly Model Kit (overall length: 530mm, overall width: 232mm) *A four-channel RC unit is necessary to operate this kit. Two 7.2V Tamiya Racing Packs (or equivalent) and charger are also required. Powerful Engine Sound Just about every sound the real Tiger I made can be made on Tamiya's 1/16 scale Tiger I. When the tank is switched on, either a manual crank start sound, or an automatic engine start sound is heard. After your engine is turned over, its time to move the tank around. As you accelerate, the engine thundering increases just like the real Tiger I. Stop the tank, and the sound of authentic idling begins. Once you have located your target, rotate the massive turret and listen to the grinding of gears of the real German war machine. The more you control this R/C tank, the more you will feel like the commander of the full size Tiger I ! The front-mounted gearbox contains two Type 380 motors that can operate together or individually to produce forward/reverse running and pivot turning. Metal torsion bars and suspension arms combine with the wide tracks to smoothly absorb bumps and dips in th R/C Tiger I Early w/Option Kit   Warning! Not suitable for children under 14 years.

More
1:18 RC Dynahead 6x6 (G6-01TR)

RC off-road

1:18 RC Dynahead 6x6 (G6-01TR)

€285.00

Article number: 300058660 Product: 1:18 RC Dynahead 6x6 (G6-01TR) Tamiya is delighted to announce the latest 6-wheeled beast in our line-up, the Dynahead 6x6, which takes inspiration from the big trucks used in the gruelling offroad world of truck trials. It appears on a new chassis variant named the G6-01TR, based upon the G6-01, with hub reduction axles providing extra height for taking on rougher terrain. With a stylish body penned by self-proclaimed "hyper designer" Takayuki Yamazaki from Japan, (Dual Ridge, etc.) it is sure to be a fun addition to your R/C garage! About the Model • This is a 1/18 scale 6WD R/C model assembly kit. Length: 453mm, width: 244mm, height: 232mm. • Wheelbase: 173+126mm. • The cab-over truck body is a brand new design by Takayuki Yamazaki. • Hub reduction axles raise ground clearance by 15mm; in conjunction with the traction provided by a 37.35:1 gear ratio (with kit-included 18T pinion), the Dynahead 6x6 has awesome off-road and crawling capability! • 5-spoke wheels are paired with V-tread block tires (Item 53854) for superlative bite. • With suspension reassembly and a separately-sold transmitter with 4WS function and R/C equipment, the rear wheels can be made steerable.

More
1:18 RC Konghead 6x6 (G6-01)

RC off-road

1:18 RC Konghead 6x6 (G6-01)

€214.00

Article number: 300058646 Product: 1:18 RC Konghead 6x6 (G6-01) Take a look at Tamiya's first ever big-wheeled 6WD model - the Konghead 6x6! This model utilizes a new geardriven 6WD chassis which used the GF-01 as a starting point. The excellent drive it provides will make for supremely fun off-road driving. About the Model • This is an R/C model assembly kit. Length: 420mm, width: 270mm, height: 280mm. • The 6WD chassis employs 3 differential gears to transmit power from the front-center-mounted motor to all of the model's wheels. These differentials are encased in the durable monocoque. • 6-wheel independent double-wishbone suspension is paired with friction dampers. • The brand new polycarbonate body was inspired by the classic Bullhead, and indeed its metal-plated injection molded air cleaner and muffler depictions are the same as those used on the Bullhead. • The kit manual build creates a front wheel-steering model. It also includes instructions to re-assemble it into a 4WS model with steerable rear wheels. Separately-sold 4WS function transmitter and R/C equipment are required. • The model is compatible with many GF-01 chassis Hop Up Option and spare parts. • The Bullhead-inspired body features a brand new sticker sheet with brash, colorful logos created just for this model. A host of metal-plated parts includes air cleaners and exhaust (both from the Bullhead), plus chrome-plated deep rim wheels. • Its powerful gear-driven setup allows the Konghead to take on slopes of up to 40 degrees - the perfect outdoor drive!

More
1:10 RC 1991 Audi V8 Touring (TT-02)

RC on-road

1:10 RC 1991 Audi V8 Touring (TT-02)

€143.00

Article number: 300058682 Product: 1:10 RC 1991 Audi V8 Touring (TT-02) Tamiya is delighted to announce the appearance of another classic racing car on our popular TT-02 chassis, this time the Audi V8 touring car with a 456hp 3.6-liter V8 which graced the DTM (Deutsche Tourenwagen Masters) in 1991. That season, it took four victories overall and carried Frank Biela to the drivers’ title. About the Model • This is a 1/10 R/C model assembly kit. • The powerful, imposing body is molded accurately in lightweight and durable polycarbonate. • Stickers are included to recreate the markings for the no.45 car driven by 1991 champion Frank Biela. Masking stickers will aid in the paint job. • Two-piece mesh wheels (Item 50548 design) have silver color rims and gold color spokes. They are paired with racing slick tires. • The TT-02 chassis is an adaptable and balanced design with excellent stability, plus features such as identical suspension arm and upright components for ease of assembly. • 4-bevel differential gears and 4-wheel double wishbone suspension make for a smooth ride. • A plethora of Hop-Up Option parts is available to tune the TT-02 chassis to your needs.

More
1:10 RC AQROSHOT (DT-03T)

RC off-road

1:10 RC AQROSHOT (DT-03T)

€124.00

Article number: 300158610 Product: 1/10 RC AQROSHOT (DT-03T) In early 2014 Tamiya introduced the new DT-03 off-road chassis. For 2015 Tamiya introduces the DT-03T, which is a TRUCK variant. The platform is intended as an easy-to-get-started model to encourage young drivers to enter the world of R/C. Its intuitive yet tough design allows hassle-free assembly and gives less experienced users the opportunity to get to grips with R/C model composition and construction. The truck variant allows users to tackle bumpy street or parking lot terrain with its taller stance and wide and low profile road hugging equipped tires. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

More
1:10 RC Blackfoot (2016)

RC off-road

1:10 RC Blackfoot (2016)

€204.00

Article number: 300058633 Product: 1:10 RC Blackfoot (2016) Tamiya announces this modern successor to the Blackfoot line of cars. It features the classic body from the Blackfoot III (Item 58498) mounted on the chassis used in the Monster Beetle (2015) model (Item 58618), an all-action 2WD chassis fitted out with big tires for rough-and-tumble off-road fun. This model promises to be great fun for both beginners and Tamiya veterans alike! About the Model • This is a 1/10 scale R/C model assembly kit. Length: 440mm, width: 290mm, height: 270mm. • The ABS resin Blackfoot III body is given newly designed markings that carry on the theme of the original series of models. A resin driver figure is also included. • The rugged ABS space frame chassis utilizes double-wishbone front and trailing arm rear suspension setups in tandem with CVA oil dampers. • Rear universal drive shafts come with rubber boots to protect from dust. • A resin undercover protects the sealed gearbox at the rear of the model. • 123mm semi-pneumatic lug pattern tires are paired with yellow 1-piece wheels. Safety note: Not for children under 14 years. The packaging has to be kept since it contains important informations. Illustration may vary from actual product in the box. CARSON reserves the rights to change, update or replace any component at any time.

More
1:10 RC Buggy Sand Scorcher 2010 2WD

RC off-road

1:10 RC Buggy Sand Scorcher 2010 2WD

€361.00

Article number: 300058452 Product: 1:10 RC Buggy Sand Scorcher 2010 2WD Originally released in 1979, the R/C Sand Scorcher was greatly received from fans around the world with its humorous form and superb mechanism. Keeping true to the basic layout of the original while incorporating many refined parts, this re-released version of the Sand Scorcher will remind you of the original. This model realistically reproduces the unique form of the buggy which was seen at the one-make race at the "Baja 1000" in California, USA. The body is molded in white polystyrene and can be painted with Tamiya plastic model paints. The rear-wheel drive 2WD chassis features realistic and aggressive driving performance that will no doubt excite you. Chassis layout: Chassis features a 2mm thick FRP plate with an aluminum reinforcing plate for strength and flexibility to ensure stability. 4-wheel independent suspension features front double trailing arm and rear swing axle setups, die-cast suspension arms, and oil dampers. Electronics and battery are protected by a durable clear plastic mechanism box. Comes equipped with full ball bearings to reduce friction loss, and mounted on the 3-piece center-lock wheels are grooved front tires and ribbed rear tires that ensure superb off-road performance.   Warning! Not suitable for children under 14 years.

More
1:10 RC Citroen 2CV Charleston (M-05)

RC on-road

1:10 RC Citroen 2CV Charleston (M-05)

€133.00

Article number: 300058655 Product: 1:10 RC Citroen 2CV Charleston (M-05) This radio control model faithfully recreates the world-renowned Citroën 2CV Charleston. The polycarbonate body sits on top of Tamiya’s fun to drive M-05 front wheel drive chassis. Over 3.5 million cars were produced from 1948 to 1990. Its reliable air-cooled 2-cylinder engine got the little front wheel drive car from A to B with little fuss, and the car could accommodate 4 adults adequately. With its soft suspension designed for off-road driving, it is said that the 2CV could traverse a ploughed field without breaking any of the eggs it carried. M-05 at a glance: The front wheel drive M-05 chassis features a lightweight, narrow, durable, and easy-assembly semi-monocoque resin frame. Gearbox, motor, battery pack, receiver, servo and ESC are positioned for optimum weight distribution and a low center of gravity. Ground-hugging 4-wheel independent double wishbone suspension and the 3-piece steering linkage provide stable high-speed cornering. Gun metal color 11-spoke wheels are matched with tread-patterned radial tires and feature tire inserts.

More
1:10 RC Citroen 2CV Rally (M-05Ra)

RC on-road

1:10 RC Citroen 2CV Rally (M-05Ra)

€143.00

Article number: 300058670 Product: 1:10 RC Citroen 2CV Rally (M-05Ra) Tamiya is delighted to announce this new rally version kit of that legendary motoring icon, the Citroën 2CV. The kit features a highly realistic recreation of the body, modified for rally races, and based upon a dedicated rally chassis in the form of the M-05Ra.

More
1:10 RC F104 PRO II w/Body

RC on-road

1:10 RC F104 PRO II w/Body

€228.00

Article number: 300058652 Product: 1:10 RC F104 PRO II w/Body Power up your R/C formula racing life with this kit, which pairs the lightweight and streamlined direct drive F104 chassis with a new lower deck, and upgrade parts, giving a sharp and responsive drive. An all-new original body is also included! About the Model • This is a 1/10 R/C model assembly kit. Length: 440mm, width: 180mm, height: 88mm, wheelbase: 270mm. • The lightweight F104 chassis is fitted with various upgraded parts to turn it into the F104 PRO II. • FRP double deck chassis has a new lower deck design, and an inline (longitudinal) battery position. • The 1.5mm thick FRP T-bar design with U-shaped cutaway is inherited from the F104WGP. It makes up the rear suspension in concert with friction plates and a TRF damper. • Features front independent coil spring suspension. Alter camber by changing upper mount attachment direction. • Utilizes an aluminum ball differential. Rear wheels can be changed without its being dismantled. • A realistic original polycarbonate body is included. Its design is inspired by 2017 trends, with a sharp, slanting nose and bulging side pontoons. Additional parts are included to create alternative lower side pontoon sections as separate parts for chassis with larger R/C equipment. • Separate parts depict the complex front wing and its low rear counterpart, rear diffuser, mirrors, helmet, etc. • Comes with realistic semi-pneumatic synthetic rubber tires, and marking stickers to decorate the body. • A wide range of Hop-Up Option parts are available to further tune the chassis to your needs.

More
1:10 RC Fire Dragon (2020)

RC buggys

1:10 RC Fire Dragon (2020)

€195.00

Article number: 300047457 Product: 1:10 RC Fire Dragon (2020) This is an updated re-release version of the 4WD buggy Fire Dragon, the original of which was first released in 1989. Both fans of yesteryear and modern day R/C aficionados will love the cultured drive and the classically styled body. About the Model • Length: 390mm, width: 240mm, height: 139mm. • The chassis consists of a tough bathtub frame plus front and rear gearboxes with suspension attached. • 4-wheel double wishbone suspension uses CVA oil dampers for a superior ride, and a front stabilizer for a firm setup. • A new aluminum motor mount gives improved rigidity. • Front and rear sealed differentials are die-cast 3-bevel types for superior handling feel. • Use adjusters in the 3-piece steering tie-rod setup to alter toe. • Body is molded in polycarbonate and pre-painted red. Just apply stickers to complete it.

More
1:10 RC Ford F-350 HighLift 4x4 3-Speed

RC off-road

1:10 RC Ford F-350 HighLift 4x4 3-Speed

€508.00

Article number: 300058372 Product: 1/10 RC Ford F-350 HighLift 4x4 3-Speed Electric R/C assembly kit of one of the most representative American pick-up trucks, the Ford F-350. The model features realistic ladder frame, 3-speed transmission and shaft drive 4WD system. Highly detailed injection molded body and large diameter wheels enhance the stylish high-ground-clearance look. Original marking stickers add to the truck's overall realism. Ford F-350 High-Lift Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

More
1:10 RC Lancia 037 Rally (TA02-S)

RC on-road

1:10 RC Lancia 037 Rally (TA02-S)

€209.00

Article number: 300058654 Product: 1:10 RC Lancia 037 Rally (TA02-S) Tamiya is delighted to announce the release of this model, which sees the classic Lancia 037 Rally body (previously used in Items 58040 and 58278) paired with the evergreen TA02 chassis' short wheelbase variant. The 037 Rally was Lancia's 1983 Group B WRC offering and took a 1-2 at the Monte-Carlo Rally as it romped to that year's manufacturers' championship. Its dashing body design was the work of the renowned artists at Pininfarina, and the highly distinctive shell retains popularity even today. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 422mm, width: 186mm, height: 132mm. • The injection molded body offers a highly realistic recreation of the 037 form, and comes with metal-plated light cases for headlights, taillights and fog lamps. Side mirrors and windshield wipers are separate parts. • The interior features a piece including depictions of driver & co-driver, plus dashboard. • The TA02S chassis is a shaft-driven 4WD unit with bathtub frame, a rear ball diff and front gear diff. • Four-wheel independent double-wishbone suspension is paired with CVA oil dampers. • The front bumper and sticker sheet are newly-produced for this model. • Compatible with standard Type 540 motors.

More
1:10 RC Landfreeder Quadtrack TT-02FT PB

RC off-road

1:10 RC Landfreeder Quadtrack TT-02FT PB

€333.00

Article number: 300058690 Product: 1:10 RC Landfreeder Quadtrack TT-02FT PB • This is a 1/10 scale R/C model assembly kit. Length: 425, width: 247mm. • The Landfreeder body comes molded in polycarbonate, pre-painted Black (PS-5) with Smoke (PS-31) windows. Separate plated parts recreate grille cover, fog lamps and roll bar. • The TT-02FT is a variant of the TT-02, with four tracks on its suspension. • Each of the three-sided trackunis is 39.3mm in width and has a contact area of 60mm length. Tracks require assembly from links, and offer efficient traction. • Two types of elastomer track link (standard and grouser) are included for setup options. • Track units are attached to suspension arms via plates, and each features a sprocket and four rollers. The third roller is sprung to further enhance performance. • Polycarbonate chassis cover and wheel well liners give protection from dust and dirt encountered off-road. • TT-02 four-bevel differentials and identical suspension arms are used. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

More
1:10 RC Mercedes-AMG GT3 (TT-02)

RC on-road

1:10 RC Mercedes-AMG GT3 (TT-02)

€143.00

Article number: 300058639 Product: 1:10 RC Mercedes-AMG GT3 (TT-02) Tamiya continue to expand our range of kits on the entry level TT-02 with this stunning new release. It depicts the fabulous body of the Mercedes-AMG GT3 car, which was created for the GT3 class of racing from 2016 onwards. The 6.3-liter V8 powered car has quickly become a modern legend with race results like a clean sweep of the top 4 in a 2016 Nürburgring 24-hour race. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 453mm. • The luxurious, powerful form of the Mercedes-AMG GT3 is recreated in polycarbonate. • Separately molded parts are included in the kit to recreate side mirrors and the distinctive rear wing. • PS-63 Bright Gun Metal (Item 86063) is a new Tamiya Color spray for polycarbonate, formulated especially for this model. It recreates the standard works color (requires a coat of PS-55 Flat Clear on outside of body). • The beginner-friendly yet highly adaptable TT-02 is a versatile and easy-to-maintain chassis. • Comes with the 12-spoke wheels used in Item 58619. • Stickers are included to recreate the markings of the car, as are masking stickers for use when painting. • An extensive TT-02 option parts line-up offers a number of opportunities to tune your car. • Please note that R/C equipment and battery pack are separately required.

More
1:10 RC Monster Beetle (2015)

RC off-road

1:10 RC Monster Beetle (2015)

€214.00

Article number: 300058618 Product: 1:10 RC Monster Beetle (2015) Tamiya is delighted to announce the release of this updated version of another of our back-catalog classics, the Monster Beetle (Item 58060, from 1986). This model features a stylized version of the timeless Volkswagen Beetle body, mounted on an all-action 2WD chassis fitted out with big tires for rough-and-tumble off-road fun. This new model promises to be great fun for both beginners and Tamiya veterans alike! About the Model • This is a 1/10 scale R/C model assembly kit. Length: 410mm, width: 290mm, height: 240mm. • The injection-molded plastic body accurately captures the form of the early Beetle. Where possible, stickers have been kept over from the original model designs; these are joined by newly-designed markings. • The rugged ABS space frame chassis from Item 58060 has been kept on. It utilizes double-wishbone front, and trailing arm rear suspension setups in tandem with CVA oil dampers. • Rear universal drive shafts transfer power smoothly, and come with rubber boots to protect from dust. • A large dust cover is included to protect the vital R/C equipment. • The model has great off-road performance thanks to 130mm-diameter tires with a combined lug/pin spike tread. They are paired with gold color plated one-piece wheels. • Includes a driver figure. Included: Assembly kit with pictured user guide, Tamiya ESC (capable of running brushed and brushless motors), electric motor type 540, ABS body Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

More
1:10 RC NISMO R34 GT-R Z-Tune (TT-02D)

RC on-road

1:10 RC NISMO R34 GT-R Z-Tune (TT-02D)

€214.00

Article number: 300058605 Product: 1/10 RC NISMO R34 GT-R Z-Tune (TT-02D) The R34 GT-R is given a new release on the new Tamiya standard for drift driving, the TT-02D chassis. The R34 was the 5th generation of the legendary Nissan GT-R series of cars; it debuted at the 2005 Tokyo Auto Salon. The Z-Tune version was an even more impressive beast; developed by Nissan's in-house motorsports/ performance division NISMO, it was built around a 500hp 2.8-liter powerplant that could reach 8,000rpm. It also featured SACHS adjustable suspension and brakes developed in conjunction with Brembo. NISMO also went to work on the body, with racing features such as vents and wider fenders than the original. The body color was the aptly-named Z-Tune Silver, applied specially for this car. With only 20 production cars made, getting your hands on one is a difficult task, but you can pilot it in R/C form with this model! About the Model • This is a 1/10 scale R/C model assembly kit. • The aggressive 2-door coupe form is captured faithfully by the polycarbonate body. • The TT-02D is the specially tuned drift spec of the popular shaft-driven 4WD entry chassis, the TT-02. • Features 24mm width drift-spec tires, CVA oil dampers, full ball bearings, a sport-tuned motor and aluminum motor heat sink. • The body was originally used on Item 58419. • Export version only includes LEDs to recreate lights on the car.   Warning! Not suitable for children under 14 years.

More
1:10 RC Nissan GT-R Drift (TT-02D)

RC on-road

1:10 RC Nissan GT-R Drift (TT-02D)

€209.00

Article number: 300058623 Product: 1:10 RC Nissan GT-R Drift (TT-02D) Tamiya is delighted to announce a new release on the drift spec TT-02D chassis. This model depicts the Nissan GT-R, using the body originally included in Item 58411. The GT-R was unleashed on the world by Nissan in December 2007. Laden with a powerful 3.8-liter V6 twin-turbo engine, dual clutch transmission, independent transaxle 4WD and more, it was designed to be a supercar ready to be driven any time, anywhere and by anyone, and featured regular annual performance-boosting design tweaks. About the Model • This is a 1/10 scale R/C model assembly kit. • The sleek, powerful form of the GT-R is captured faithfully by the polycarbonate body. • Features separately-molded side mirror and rear wing parts. • LED units are included for export version only! • The TT-02D is the specially tuned drift spec of the popular shaft-driven 4WD entry chassis, the TT-02. • Features 24mm width drift-spec tires on metal-plated mesh wheels, CVA oil dampers, full ball bearings, a sport-tuned motor and aluminum motor heat sink. • The body was originally used on Item 58411.

More
1:10 RC NSU TT Jager (M-05)

RC on-road

1:10 RC NSU TT Jager (M-05)

€124.00

Article number: 300058649 Product: 1:10 RC NSU TT Jager (M-05) West German manufacturer NSU's Prinz was a highly popular compact car, produced between 1958 and 1973. This model recreates the Jägermeister-sponsored edition of the NSU TT, a race-oriented variant of the Prinz, of which almost 2,500 examples were built in the late 1960s and early 1970s. It was powered by a variety of inline-4 engines depending upon the spec. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 393mm. • The form of the NSU TT Jägermeister is recreated faithfully in polycarbonate. • The M-05 chassis is a compact unit based around a lightweight monocoque and offering great weight distribution with a low center of gravity. • This model uses the 239mm L wheelbase. • Gold color multi-spoke wheels are those seen on Item 47308, paired with M-Chassis slick tires. • Comes with marking stickers, plus masking stickers for use when painting the body. • The popular M-05 has a wide range of Hop-Up Option parts available to tune the chassis.

More
1:10 RC Porsche 911 Carrera RSR (TT-02)

RC on-road

1:10 RC Porsche 911 Carrera RSR (TT-02)

€152.00

Article number: 300058571 Product: 1:10 RC Porsche 911 Carrera RSR (TT-02) The Porsche 911 Carrera RSR joins the rapidly-expanding TT-02 chassis line-up. It is a legendary Group 4 car which had a body weighing just 900kg with a 300hp-plus horizontally opposed 6-cylinder engine, and still holds a place in fans’ hearts today thanks to its exploits with racing teams the world over. In 1973, the year of its release, it won the European GT Championship, plus the renowned 24 Hours of Daytona and 12 Hours of Sebring races. The works prototype in predominantly silver livery with the Martini stripe also took the checkered flag in the famed Targa Florio race. About the Model • This is a 1/10 scale R/C assembly kit. • The model’s polycarbonate body accurately recreates that of the real car. Rear wing is integrated with body. • Separate parts are included to depict side mirror. • The shaft driven 4WD TT-02 is a highly versatile and easy-to-maintain chassis. • A wide range of option parts are becoming available to tune and customize TT-02 chassis machines. • The kit includes decorative and masking stickers. • EXPORT VERSION ONLY includes RS-540 Torque-Tuned Motor.   Warning! Not suitable for children under 14 years.

More
1:10 RC Subaru WRX STI 24hr Nrbg TT-02

RC on-road

1:10 RC Subaru WRX STI 24hr Nrbg TT-02

€147.00

Article number: 300058645 Product: 1:10 RC Subaru WRX STI 24hr Nrbg TT-02 This model will recreate the Subaru WRX STI car which took an impressive victory in the SP3T class of the Nürburgring 24 Hours race at the legendary German circuit in May 2016. The car is powered by the same engine as in its production model - the EJ20 2-liter horizontally-opposed turbo engine.

More
1:10 RC Super Clod Buster 2012

RC off-road

1:10 RC Super Clod Buster 2012

€309.00

Article number: 300058518 Product: 1:10 RC Super Clod Buster 2012 The Super Clod Buster is back! This monster truck features a body that was inspired by classic pick-up trucks from the 1980"s, giving it a realistic appearance. The front grille, air intake and roll bar are recreated with metal-plated parts. The truck also features a twin-motor dual gearbox 4WD drivetrain, 8 coil spring dampers and massive 165mm diameter tires, as well as a 4-wheel drive steering system to help the model navigate tight corners.

More
1:10 RC TA08 PRO Chassis Kit

RC on-road

1:10 RC TA08 PRO Chassis Kit

€318.00

Article number: 300058693 Product: 1:10 RC TA08 PRO Chassis Kit • This is a 1/10 scale R/C touring car chassis kit. • Features Stepped-V shaped chassis which balances weight and rigidity. The battery pack and servo are positioned on a slight angle (about 10 degrees) to reduce surface contact and facilitate optimum weight distribution. • Positioning spur gear in front of motor produces stable drivability. • 2 belt-driven 4WD uses TRF420 gear differentials and steel TA07 differential joint cups. • A-arm suspension arm gives your model a low center of gravity, enhanced with laid down dampers. Camber and caster angles are adjustable by turnbuckle shafts and lower arm spacers respectively. • Comes with Super Short Big Bore size dampers. Universal shafts and full bearings give efficient drive. • Rotating body mounts by 180 degrees switches between standard and 2mm advanced body positions. • Please note that the R/C equipment, motor, battery pack, tires and body are sold separately Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

More
1:10 RC The Grasshopper II Black Edition

RC buggys

1:10 RC The Grasshopper II Black Edition

€114.00

Article number: 300047471 Product: 1:10 RC The Grasshopper II Black Edition • This is a 1/10 scale R/C 2WD buggy model assembly kit. Length: 400mm, width: 223mm, height: 136mm. • The durable black injection molded polystyrene body just requires application of stickers for easy setup, and has a driver figure (not painted) for attachment. • The durable ABS chassis uses front swing arm and rear rolling rigid suspension setups. • Fully enclosed gearbox contains a differential gear to aid smooth cornering. • Longitudinal battery is easily removable from the back of chassis. • Wheels are molded in durable ABS plastic. • Uses CVA oil dampers and Item 45069 TBLE-04S for export, and friction dampers for kits sold in Japan. • Compatible with a range of Hop-Up Option parts. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

More
1:10 RC Thunder Dragon (2021) 4WD PB

RC buggys

1:10 RC Thunder Dragon (2021) 4WD PB

€195.00

Article number: 300047458 Product: 1:10 RC Thunder Dragon (2021) 4WD PB • This is a 1/10 scale R/C model assembly kit. Length: 390mm, width: 240mm, height: 130mm. Wheelbase: 260mm. • The chassis is based around an ABS plastic bathtub frame for excellent durability and ease of maintenance. • 4-wheel double wishbone suspension uses CVA oil dampers and a front stabilizer for a superior ride. • Features shaft-driven 4WD with front and rear die-cast 3-bevel differentials for smooth, superior handling feel. • Semi-pneumatic spike tires give great grip, and are paired with large-diameter ABS wheels. • The streamlined Thunder Dragon body is molded in polycarbonate, with non-canopy sections pre-painted in silver. It is pre-cut for convenience.

More
1:10 RC Toyota Hilux Extra Cab (CC-01)

RC off-road

1:10 RC Toyota Hilux Extra Cab (CC-01)

€219.00

Article number: 300058663 Product: 1:10 RC Toyota Hilux Extra Cab (CC-01) A brand new release on the trusty CC-01 chassis: this model recreates the latest version of a famous name in the Tamiya catalog, the Toyota Hilux. It depicts the 8th generation of the vehicle, released back in 2015, specifically a special full size version of the Extra Cab which Toyota’s British arm had made in the colors of Tamiya’s legendary Bruiser (Items 58048 and 58519) as a tribute to our model. It also appeared in some high profile PR activity. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 465mm, width: 200mm. • The rugged Hilux Extra Cab form is depicted in lightweight and durable polycarbonate, with separate metalplated side mirror and light case parts. • Includes 2 each of white (headlight) and red (taillight) 5mm-diameter LEDs and the LED Light Unit. Please note that the model light cases can be fitted with up to 6 LEDs front and rear. • Metal-plated wheels are paired with realistic tires featuring authentic block tread pattern. • Highly reliable CC-01 chassis features a full-time 4WD system and front double wishbone, rear 4-link rigid suspension equipped with 4 CVA oil dampers. • This model uses the longer 267mm wheelbase. • An expansive range of option parts is available to customize the CC-01 chassis.

More
1:10 RC Toyota HiLuxHighLift 4x4 3-Speed

RC off-road

1:10 RC Toyota HiLuxHighLift 4x4 3-Speed

€489.00

Article number: 300058397 Product: 1/10 RC Toyota HiLuxHighLift 4x4 3-Speed Combining nostalgic feel with modern mechanics, the superbly detailed classic Toyota pick-up truck body is now mounted on the same chassis as the Ford F-350 High-Lift. Toyota Hilux High-Lift Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

More
1:10 RC Toyota Land Cruiser 40 CR-01

RC off-road

1:10 RC Toyota Land Cruiser 40 CR-01

€413.00

Article number: 300058405 Product: 1/10 RC Toyota Land Cruiser 40 CR-01 R/C fans have long been modifying their machines into rock crawlers. Tamiya has followed this growing segment with interest and we are now proud to present to you the fruits of our research. This new crawler features a true-to-scale Toyota Land Cruiser 40 body made from lightweight polycarbonate mounted on an all-new CR-01 chassis and is literally ready to rock. Toyota Land Cruiser 40 Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

More
1:10 RC TT-02D Drift Spec Chassis

RC on-road

1:10 RC TT-02D Drift Spec Chassis

€138.00

Article number: 300058584 Product: 1:10 RC TT-02D Drift Spec Chassis The TT-02 chassis is Tamiya's latest entry level 4WD full independent suspension assembly kit that offers ease of assembly and easy maintenance. The TT-02D is the Drift Spec variant that includes special parts to make it a fun to drive drifting machine. Includes Super Driftech tires (24mm width) which feature a special resin compound suited to drift driving. Includes full ball bearings and CVA (oil-filled) Super Mini shocks. Tamiya Sport-Tuned Motor and Aluminum heat sink is included. Brake disc-shaped wheel hubs (silver color) and battery holder (blue) are metal-plated parts. The TT-02 chassis offers 2 different wheelbases and tread settings without the addition of Option Parts. It also supports 10 different gear ratios. The skid-shaped underside of the bathtub type frame minimizes contact with the road surface. Body is not included in this kit. Purchase a separately-sold body of your choosing and fit it to the chassis.   Warning! Not suitable for children under 14 years.

More
1:10 RC Unimog 406 Ser.900 CR-01

RC off-road

1:10 RC Unimog 406 Ser.900 CR-01

€409.00

Article number: 300058414 Product: 1/10 RC Unimog 406 Ser.900 CR-01 MB Unimog 406 Ser.U900 CR01 Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

More
1:10 RC Volkswagen Beetle (M-06)

RC on-road

1:10 RC Volkswagen Beetle (M-06)

€171.00

Article number: 300058572 Product: 1:10 RC Volkswagen Beetle (M-06) The Volkswagen Beetle needs little introduction to most people around the world. A record 21 million Beetles were produced over a production period spanning 60-plus years, and the distinctive rounded form of the car is a familiar sight. It was the brainchild of the famed German designer Ferdinand Porsche, and saw military service during the Second World War. The R/C model of this car was released in 19xx on the M-04 chassis and it now comes out on the modern M-06 chassis. About the Item • This is a 1/10 scale R/C assembly kit. • The polycarbonate body captures the instantly-recognizable form of the car. Metal-plated parts for front/rear bumper and side mirrors included to enhance realism. • Metal-plated wheels also included. • The M-06 chassis features a Rear-Motor, Rear-Wheel Drive setup and offers nimble handling performance.   Warning! Not suitable for children under 14 years.

More
1:10 RC VW Karmann Ghia (M-06)

RC on-road

1:10 RC VW Karmann Ghia (M-06)

€162.00

Article number: 300058677 Product: 1:10 RC VW Karmann Ghia (M-06) The ever-increasing stable of Tamiya R/C cars welcomes a brand new model of a classic car, with the addition of the Volkswagen Karmann Ghia to the line-up, on the RWD M-06 chassis. The Karmann Ghia was a stylish coupé based upon the same platform as the legendary Beetle. Its body was designed by Italian firm Ghia and manufactured by the German company Karmann. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 410mm, width: 182mm, height: 125mm. • The classic form of the car is accurately captured in lightweight and durable polycarbonate. Separate plated parts depict side mirror, bumpers and light cases. • Includes marking stickers, and masking stickers for use during the paint job. • The M-06 chassis features a rear-motor, RWD setup with a longitudinally-mounted battery pack and R/C units positioned on either side for optimum balance and a low center of gravity. • This model utilizes the 239mm wheelbase M-06L chassis. • Metal-plated wheels make for a great look, and are paired with front radial and rear super grip radials for superior stability and sharp handling. • A host of Hop-Up Option parts are available to customize the chassis to your driving needs. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

More
1:10 RC VW Scirocco GT24 R-Line TT-01E

RC on-road

1:10 RC VW Scirocco GT24 R-Line TT-01E

€143.00

More
1:10 RC VW Type 2 (T1) (M-06)

RC on-road

1:10 RC VW Type 2 (T1) (M-06)

€166.00

Article number: 300058668 Product: 1:10 RC VW Type 2 (T1) (M-06) This new R/C model assembly kit depicts the 1st-generation (T1) variant of the Volkswagen Type 2 van, which was introduced in 1950 and also known as the Volkswagen Bus to many of its legions of fans. Production of the actual van continued through until 1967. The iconic body is paired with the rear-wheel drive M-06 chassis for realistic drive just like the real RR Type 2 T1. About the Model • This is a 1/10 scale R/C model assembly kit. • The form of the 23-window Type 2 T1 bus is masterfully recreated in polycarbonate, with separate molded plastic parts included to create bumper, light cases and side mirrors. • The M-06 chassis features a rear-motor, RWD setup with a longitudinally-mounted battery pack and R/C units positioned on either side for optimum balance and a low center of gravity. • This model utilizes the 239mm wheelbase M-06L chassis. • Stylish metal-plated dish type wheels make for a great look. • A host of Hop-Up Option parts are available to customize the chassis to your driving needs.

More
1:10 RC X-SA Hornet

RC buggys

1:10 RC X-SA Hornet

€171.00

Article number: 300046703 Product: 1:10 RC X-SA Hornet Another true Tamiya classic joins the new X-SA series in the form of the Hornet, a childhood dream for many early R/C fans and still a highly popular model in the modern day. About the Model • This is a 1/10 scale finished R/C model. Length: 400mm, width: 230mm, height: 150mm. Wheelbase: 251mm. • Finished polycarbonate body and wing are pre-painted in black, and have the iconic Hornet livery stickers applied. • The chassis comes ready-assembled. • Independent swing axle front suspension utilizes friction dampers, while rolling rigid axle rear suspension is fitted with oil filled dampers. • Sealed rear gearbox protects diff gear during off-road running. • Requires separately sold R/C equipment, battery pack and charger.

More
60 of 126 Items