TAMIYA Product Range
Military figures & Accessories 1:35
1:35 Fig.-Set Tank Ammo Load. Crew (4)
300035188€12.29
Article number: 300035188 Product: 1:35 Fig.-Set Tank Ammo Load. Crew (4) This set will allow you to easily recreate a WWII scene of German soldiers loading a tank with shells. ★ Set includes four figures in a variety of poses as well as parts to depict the ammunition and wooden ammunition cases. ★ Ammunition cases can be used as a highly authentic addition to Tiger I, King Tiger, Panther, and Pz.Kpfw. IV tank models. Scope of delivery: kit, instructions Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. 38to Tank Destr. Hetzer (1)
300035285€56.99
Article number: 300035285 Product: 1:35 Ger. 38to Tank Destr. Hetzer (1) Already available as a 1/48 scale MM series kit, Tamiya now responds to the requests of military modellers and announces the release of the German Tank Destroyer Hetzer Mid Production in the 1/35 scale. About the Hetzer In 1943, the German high command ordered development of a new purpose-built tank destroyer to replace all of the interim vehicles like the Marder, and the Hetzer was quickly created to meet this requirement. Based on the Panzerkampfwagen 38(t), the Hetzer housed a crew of 4 in its low, compact hull. It was armed with a powerful Pak 39 L/48 75mm gun in a fixed mounting and featured sloped armor for enhanced protection. 2,584 were produced by May of 1945, and modifications were continually added during production, leading to differences between early, mid, and late production models. About the model •High-quality 1/35 scale assembly kit model of the mid production Jagdpanzer 38(t) Hetzer. •Brand new moldings with new details such as the remote control MG34 machine gun mount on the top of the hull and periscopic binoculars. •Includes both belt type and assembly type caterpillar tracks for more modeling options. •Accessory parts such as a jack and other tools add lifelike detail to the hull. •1 tank crew figure in realistic standing pose included. •4 types of markings also included. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. Jagdpanzer IV/70 (V) Lang
300035340€59.99
Article number: 300035340 Product: 1:35 Ger. Jagdpanzer IV/70 (V) Lang This is a completely new model of the fearsome German tank destroyer Jagdpanzer IV Lang. It is designed from the ground up to be part of the long catalog of models offered in the Tamiya 1/35 scale line up of model kits. The original Jagdpanzer IV tank destroyer was based upon the Panzer IV vehicle and used extensive sloped armor with the 48-caliber 7.5cm gun that had already proven its worth on other vehicles. In January 1944, it was decided to upgrade the Jagdpanzer IV, with the powerful 70-caliber 7.5cm anti-tank gun installed in place of the original 48-caliber weapon. This bigger gun was fitted to the Jadgpanzer IV with the intention of giving it the ability to destroy Allied tanks without even entering their weapons range. It was also the origin of the name Lang, which translates into English as "long". The (V) was applied to vehicles manufactured by the German company Vomag. 930 Jagdpanzer IV /70(V) Lang vehicles were manufactured between August 1944 and March 1945, with German forces taking advantage of the exceptional range of the gun, employing it in both defensive and ambush roles even as their military situation worsened. December 2014 marks 70 years since the Battle of the Bulge, which was effectively the final German offensive of WWII. This model is perfect and right on time to liven up late Second World War dioramas. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. Marder III M Normandy
300035364€48.99
Article number: 300035364 Product: 1:35 Ger. Marder III M Normandy About the Model ★This is a 1/35 scale plastic model assembly kit. Length: 149.5mm, width: 61mm. ★The distinctive, compact form of the AFV is captured with aplomb. ★Detailed interior really catches the eye. ★Assembly type tracks feature single piece straight sections. ★12 depictions of shells are included, and can be stowed in the rack. ★Features a photo-etched part to capture the muffler cover. ★Includes four full body figures and one torso, plus two marking options.
Military model vehicles 1:35
1:35 Ger. Pkw.K1 Kübelwagen Typ82 (1)
300035213€17.99
Article number: 300035213 Product: 1:35 Ger. Pkw.K1 Kübelwagen Typ82 (1) The highly reliable, compact Kübelwagen Type 82, which served as transportation for high ranking German officers throughout WWII, now comes realized as a plastic assembly model kit. ★The model realistically captures the functional form of this mass produced car. ★The plain constitution of the press-lined body as well as the suspension arms, under guards, suspension area, and interior details such as the instrument panel and pedals all feature a realistic finish. ★You may choose to assemble all four doors in either open or closed positions. ★A figure depicting a driver in a relaxed pose is included. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. PzKpfw. III Ausf. L (1)
300035215€43.99
Article number: 300035215 Product: 1:35 Ger. PzKpfw. III Ausf. L (1) From the beginning and through to the middle stages of WWII, the Pz.Kpfw.IIIs along with the Pz.Kpfw.IVs were the core tanks used by German tank divisions. Each variant of the Pz.Kpfw.III including the Ausf.L was highly reliable, came armed with a long barreled 60 caliber 50mm gun and had reinforced armor. This is a 1/35 scale plastic assembly model kit of one such Ausf.L tank. Famous characteristics of the Ausf.L which include the driver's front panel and main gun mantlet have been realistically reproduced. The fighting compartment loading area, turret interior, and commander’s seat have been reproduced. You can also choose to assemble each hatch in either open or closed positions. Accessory parts seen on the hull such as spare tracks and tools feature a precise finish. A tank commander figure is included. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. SdKfz.161/2 Panzer IV J (1)
300035181€47.99
Article number: 300035181 Product: 1:35 Ger. SdKfz.161/2 Panzer IV J (1) For a single base tank design to fight through the entirety of WWII was something of a rarity, but the Panzerkampfwagen IV proved its enduring efficacy by doing just that. This precision plastic model depicts the Ausf.J variant of the rustic tank, which toted a 75mm gun and the distinctive "Schürzen" armor additions. Modelers can assemble the kit with open or closed hatches and brake maintence panel, and are also given the choice between cast metal and tubing idler wheels for the complex suspension. Additionally, the kit features belt type tracks and a realistic commander figure. Scope of delivery: kit, instructions, decor Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. SdKfz.171 Panther G Late V.(2)
300035176€46.99
Article number: 300035176 Product: 1:35 Ger. SdKfz.171 Panther G Late V.(2) A constant threat on account of its refined design, the Panther was a feared opponent for enemies of the German Army. In fact, a number of Panther variants were produced and perhaps the most refined was the late version of the Type G, which is recreated by this plastic model assembly kit. The model breathtakingly recreates the form of the tank, from the well-armored mantlet to the exhaust flame dampers for night combat, and right down to details such as the heater air intake. Of course, typical late production variant additions such as turret-top parts are all there, as are 2 figures in realistic pose, plus 3 marking options recreating Ardennes Front unit Panthers. Scope of delivery: kit, instructions, decor Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. SdKfz.251/1 Halftr.Per.Car.(4)
300035195€33.99
Article number: 300035195 Product: 1:35 Ger. SdKfz.251/1 Halftr.Per.Car.(4) During WWII, German armored divisions effectively used Hanomag half-track armored carriers in transport and support roles. Among the many variations was the Sd.Kfz. 251/1 Ausf.D which first appeared in 1943 and is now faithfully depicted as a plastic assembly model kit. The features of the distinctively styled Ausf.D which includes the open top cabin, seats, and wireless radio have been realistically reproduced in great detail. The rear gate can also be depicted in either open or closed position. Included with the Ausf.D are 4 figures in dynamic poses such as the driver looking back from the driver's seat as well as the commander showing the direction of the enemy. In addition, weapons such as a Panzerfaust and MG42 machine gun are included with the kit for added realism. Scope of delivery: kit, instructions, decor Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. Sturmgeschütz III B (1) StuG.
300035281€52.99
Article number: 300035281 Product: 1/35 WWII Ger.Sturmgeschütz III B (1) Germanys versatile Stug III was originally designed as an assault weapon, however also came to be used as a weapon of defense as the war progressed, providing both assault gun and anti-tank support. Based on the durable Panzer III chassis, the Stug III featured a monoblock structure with an L24 75mm short barreled gun mounted directly to the hull, eliminating the revolving turret and reducing overall height. The Ausf. B was the first truly mass produced Stug III with 250 produced from June 1940. Featuring wide tracks and powered by a 230hp Maybach HL 120 TRM engine the Ausf. B boasted a top speed of 40km/h. The Ausf. B saw action during the Balkans campaign in April 1941 and Operation Barbarossa in June, 1941. The simple construction leading to low costs and easy mass production made the Stug III one of Germanys most produced armored vehicles with over 10,000 produced during WWII.
Military model vehicles 1:35
1:35 Ger. Sturmtiger 38cm RW61 (1)
300035177€52.49
Article number: 300035177 Product: 1:35 Ger. Sturmtiger 38cm RW61 (1) In the final stages of WWII, the Sturmtiger made its appearance on the battlefield. Based on the Tiger I hull, it came armed with a giant 38cm rocket launcher. The distinctive form of the Sturmtiger with its thick and short gun is now faithfully reproduced as a plastic assembly model kit. The main hatch on the superstructure can be depicted in either open or closed position, the rocket launcher and escape hatch are moveable even after assembly, the loading crane can also rotate, and the heaviness of the tracks is also realistically depicted. Also included in the set is one figure and four rockets. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 German Heavy Tank Destroyer Elefant
300035325€76.99
Article number: 300035325 Product: 1/35 German Heavy Tank Destroyer Elefant This is a 1/35 scale assembly model of the German Heavy Tank Destroyer Elephant. Extensive research was conducted by Tamiya's designers to bring the modeling world the most accurate rendition to date. Historical background In 1941, Porsche created a prototype tank which incorporated radical features including a gasoline-electric hybrid powertrain. In 1943, the tank was transformed into the Ferdinand tank destroyer armed with an 8.8cm PaK 43 L/71 gun housed in a large box-shaped superstructure and 90 units were produced. During the Battle of Kursk, they demonstrated superior anti-armor capability to knock out T-34 and KV-1 tanks at long range, but their slow speed and unreliability resulted in many being immobilized by mechanical troubles. In 1944, 50 surviving Ferdinands were given modifications, including the addition of a machine gun, a commander's cupola, and were re-designated with the name Elefant. The Elefant saw combat on the Italian and Russian fronts, and some fought until the very end of WWII during the Battle of Berlin.
Military model vehicles 1:35
1:35 Hummel (Late Production) (3)
300035367€60.99
Article number: 300035367 Product: 1/35 Hummel (Late Production) Catch the Buzz! The Hummel was developed by German designers in short time, intended to provide a quick boost for troops that had begun to struggle in the aftermath of their invasion of the Soviet Union in 1941. Its chassis was a hybrid using parts from the Pz.Kpfw.III and IV, and the gun was the powerful sFH18/1 15cm piece that fired 43.5kg howitzer rounds distances up to and over 13 kilometers. Hummels joined the fray from 1943 in the showdown Battle of Kursk, and served through the second half of WWII. About the Model ★This is a 1/35 scale plastic model assembly kit. Length: 190mm, width: 84mm. ★The model authentically captures the Hummel form with thin fighting compartment armor and late production integrated driving compartment. ★Features coordinated sight and 15cm howitzer elevation. ★Assembly type late production tracks feature one-piece straight sections for realistic depiction of upper run "sag." ★Includes 3 figures depicted in the act of loading shells. ★Comes with 2 marking options, for Eastern and Western Front vehicles.
Military model vehicles 1:35
1:35 U.S. M1A2 SEP Abrams TUSK II
300035326€83.99
Article number: 300035326 Product: 1:35 U.S. M1A2 SEP Abrams TUSK II During the 2003 Invasion of Iraq, the U.S. deployed its latest M1A2 Abrams main battle tanks and these continued to be used in Iraq during the subsequent occupation period. Due to the threats posed by RPGs and improvised explosive devices (IEDs) in the urban environments, the tanks were upgraded with more protection in the form of Tank Urban Survival Kits (TUSK I) in 2004. The upgrade included features such as reactive armor on the hull sides, hull underside armor to protect against land mines, an M2 machine gun mounted above the main gun barrel, infrared cameras for the crew, and an external telephone for communication with accompanying infantry. A further development called TUSK II added features such as tile-shaped reactive armor to the turret and hull sides, armored shield for the commander, and a rear-view camera. These kits could be installed in field depots in about 12 hours and different tanks had different features equipped. About the Model • 1/35 scale plastic assembly model kit of the latest M1A2 SEP Abrams. • Includes parts to depict both TUSK I and TUSK II features. • Detailed parts such as the armored shields for the commander and loader and barrel-mounted M2 machine gun are included. • Intricate curves of the reactive armor tiles are accurately reproduced. • Comes with one commander and one loader figure, both depicted with body armor. • Two marking options for TUSK I and one marking option for TUSK II-equipped tanks included. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 US M113 Arm.Cavalry Assault Veh.(3)
300035135€25.99
Article number: 300035135 Product: 1:35 US M113 Arm.Cavalry Assault Veh.(3) With a cupola-cum-gun shield on the M60 machine gun, the M113 ACAV (Armored Cavalry Assault Vehicle) was an improvement on its base, the M113APC (Armored Personnel Carrier). This plastic model assembly kit accurately captures the M113 ACAV, of course including the added cupola/gun shield, and also recreating the crew seats, engine and more in the interior. Three figures in realistic pose are included in the kit. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 US M113A2 Personal Carr. Desert (2)
300035265€41.99
Article number: 300035265 Product: 1:35 US M113A2 Personal Carr. Desert (2) About the U.S. M113A2 Armored Personnel Carrier Desert Version Of the various M113 type personnel carriers developed, the M113A2 began production in June 1979. Based on combat experience in Vietnam, this version was made with improved transmission, operating equipment and cooling system as well as reinforced suspension. Detachable fuel tanks were moved to the rear and external sides of the vehicle, smoke dischargers were mounted on the front, and the trim vane was enlarged. M113A2 units were deployed to the Gulf War in 1991, and in the 2003 Iraq War. M113A2s active in Iraq were also equipped with Combat Identification Panels (CIP), the latest friend and foe recognition device to prevent friendly attack. About the Model ★Overall length 153mm ★Large trim vane, smoke shell launcher, and external fuel tanks have been accurately replicated. ★CIP attached on both sides. ★Gun shield can be attached to M2 machine gun. ★Plenty of extra attachments including personnel equipment and ammo cases. ★Commander and driver figures included Decals for 3 different vehicles deployed to Iraq and one vehicle deployed to Bosnia-Herzegovina. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 US M551 Sheridan (Vietnam)
300035365€59.99
Article number: 300035365 Product: 1:35 US M551 Sheridan (Vietnam) Vietnam Campaigner The lightweight M551 Sheridan was designed as an airliftable tank, a cutting-edge design with aluminum alloy hull and powerful 152mm gun/launcher. Work began on it in 1959, and it was officially adopted in May 1966, with 1,600 produced by November 1970. Its first taste of live action came in the Vietnam War, fulfilling both shelling and offensive roles in a punishing environment, and it would also go on to serve in the Gulf War conflict. Experience taught valuable lessons on the use of the Sheridan, and led to reinforced armor to combat land mines, while some were given a wire netting RPG screen for protection from anti-tank rockets, and even the large gun shield from the M113 ACAV. About the Model ★This is a 1/35 scale plastic model assembly kit of the M551 Sheridan. Length: 185mm, width: 80mm. ★A highly accurate rendering of the powerful form with 152mm gun/launcher based on extensive research of the actual Sheridan. ★Authentically captures a Vietnam War vehicle, with optional chain link anti-RPG net and gun shield. ★Choose open or closed rotating driver's hatch. ★Assembly type tracks feature one-piece straight sections. ★Nylon mesh is included to recreate anti-RPG net and engine grille mesh. ★Clear parts recreate periscope components. ★Comes with commander and loader figures, plus torso driver figure. ★2 Vietnam War marking options are included.
Military model vehicles 1:35
1:35 US MBT M1A1 Abrams (2)
300035156€42.99
Article number: 300035156 Product: 1:35 US MBT M1A1 Abrams (2) This is a 1/35 scale plastic assembly kit model of the U.S. M1A1 Abrams Main Battle Tank, the world’s most powerful tank which featured 120mm smoothbore gun, superb fire-control system that uses a laser rangefinder, and an impressive gas turbine engine. The massive, dynamic form of the tank has been realistically reproduced. Details such as engine grille and welded sections on armor plates have a rich finish. The model features 12.7mm and 7.62mm guns as well as smoke dischargers. Nylon mesh to depict the rear rack is included to enhance realism. In addition, a commander and a loader figures are also included in kit. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 US MBT M1A2 Abrams Iraqi Freedom(2)
300035269€56.99
Article number: 300035269 Product: 1/35 US MBT M1A2 Abrams Iraqi Freedom(2) U.S. M1A2 Abrams 120mm Gun Main Battle Tank The M1 Abrams, the worlds' strongest tank, has undergone step-by-step modification since its commission by the US military in 1980. The M1A2 evolved from the M1A1HA, and features Intervehicular Information System (IVIS) and Commander's Independent Thermal Viewer (CITV). Kit features A2 turret comes with CITV and new style vision block. About the M1A2 Abrams The M1 Abrams, officially commissioned by the US military in 1980, was designed totally different from previous post-WWII US military tanks. Although fitted with the same 105mm cannon as the M60, the M1 was powered by a gas turbine engine and was fitted with spaced armor. Planned to be commissioned by the US military over a long period, the M1 was designed with future reforms in mind. In 1984, the M1A1 was developed with a 120mm smooth bore cannon, and a further variant the M1A1HA was later developed featuring depleted uranium armor. This then led to the M1A2, which was fitted with Intervehicular Information System (IVIS), Commander's Independent Thermal Viewer (CITV) turret and new style vision block. The M1A1HA and the M1A2 both played significant roles in Operation Iraqi Freedom, being deployed by land forces as well as the Marine Corps as they moved toward Baghdad. Model kit, Scale 1:35, Vehicle, 3 Figures, Manual, Decal, Length 283 mm.
Military model vehicles 1:35
1:35 US Navy PBR 31 MK.II Pibber Vietnam
300035150€47.99
Article number: 300035150 Product: 1:35 US Navy PBR 31 MK.II Pibber Vietnam This high-speed, heavily armed small craft was used heavily by U.S. forces in the Mekong Delta region. It is recreated with aplomb in this plastic model assembly kit, with details accurately captured from the hull form to the interior. The lethal 12.7mm and 7.62mm machine guns, plus the 40mm grenade launcher are realistically depicted along with a host of accessories such as jerry cans, plus 4 figures.
Military model vehicles 1:35
1:35 US Tank M41 Walker Bulldog (3)
300035055€19.49
Article number: 300035055 Product: 1:35 US Panzer M41 Walker Bulldog (3) This is a 1/35 scale plastic model assembly kit depicting the M41 Walker Bulldog. ★The compact form of the 72mm gun-toting M41 is captured in style. ★From accurate surface textures to depictions of weld lines, there is plenty of detail. ★Comes with decals to depict either a U.S. or a Japan Ground Self Defense Force vehicle. ★Includes a commander figure and two soldiers to add further life to your model. Warning! Not suitable for children under 14 years.
Military figures & Accessories 1:35
1:35 WWII Fig.-Set Ger. Assault Tro. (8)
300035030€7.19
Article number: 300035030 Product: 1:35 WWII figure set German. infantry (8) In an unprecedented variety, TAMIYA is showing plastic models here that are unparalleled in terms of their design, detailing, construction and accuracy of fit. These models stand up to every quality test and give an insight into weapon technology and development. 8 figures Scope of delivery: kit, instructions Warning! Not suitable for children under 14 years.
Military figures & Accessories 1:35
1:35 WWII Fig.-Set MG-Crew Maneuver (5)
300035184€12.29
Article number: 300035184 Product: 1:35 WWII Fig.-Set MG-Crew Maneuver (5) This is a plastic assembly model kit of a WWII German machine gun crew in M43 field uniforms and boots with leggings as seen on German soldiers from 1943. This five figure set features a noncommissioned officer carrying an MP40 submachine gun in his hand, three soldiers carrying ammunition cases and a tri-pod gun mount respectively, and the machine gunner with a MG42 machine gun on his shoulder. The set includes sharply detailed parts to depict equipment such as MG42 and MG34 machine guns, tripod, and ponchos. Combine it with models of tanks and other vehicles belonging to the German army for a wider scale diorama.
Military model vehicles 1:35
1:35 WWII Ger. Cargo Truck 3to (2)
300035291€44.49
Article number: 300035291 Product: 1:35 WWII Ger. Cargo Truck 3to (2) About the 3Ton 4x2 Cargo Truck The German army in WWII used a wide variety of wheeled vehicles as part of their overall strategy of fast mechanized warfare. Among the most widely used was the 3Ton 4x2 Cargo Truck, a truck design that was first produced in the 1930s. Featuring a dependable 6-cylinder gasoline engine,the 3Ton 4x2 Cargo Truck could take on a very large payload disproportionate to its size. They proved to be not only extremely reliable, but also very versatile, and were employed in a wide variety of roles, including fuel truck, ambulance, radio truck, as well as general-purpose cargo truck. About the Model •High-quality 1/35 scale assembly model kit of the 3Ton 4x2 Cargo Truck. •This kit is an all-new molding, and is much more accurate than kits current on the market. •The actual trucks chassis had a forward slant (designed to balance the cargos weight), and this unique feature has been accurately reproduced. •Suspension features a reasonable number of parts for easy assembly without sacrificing detail.- Driver and navigator figures included. •Accessory set of fuel drums and jerry cans also included for a full cargo load. •Comes with 4 types of markings, including both German army and Luftwaffe units. •To aid with painting, window masks will be included for the first time in a military model. •The actual truck served from the 1930s to the end of the war on all battle fronts, so this model can be displayed together with a wide range of other Tamiya 1/35 scale vehicles and figures such as Sturmgeschutz III Ausf. B and King Tiger. Model kit, Scale 1:35, Vehicle, 2 Figures, Manual, Decal, Length 174 mm. Warning! Not suitable for children under 14 years.
Military figures & Accessories 1:35
1:35 WWII Ger.Milit.Insignia Decal Vol.2
300012641€11.79
Article number: 300012641 Product: 1/35 WWII Ger.Milit.Insignia Decal Vol.2 Add further fine details to your 1/35 scale German WWII Infantry figures with this easy-to-use decal set. These are designed with the modeler in mind to save time and stress allowing for a more realistic finish. 1:35
Military figures & Accessories 1:35
1:35 Zimmerit Dekor-Satz Tiger I
300012647€11.29
Article number: 300012647 Product: 1/35 WWII Zimmerit Dekor-Satz Tiger I Simulating Zimmerit on military models using putty enhances the model's presence but at the same time it requires advanced skills and is time consuming. This sticker sheet enables easy reproduction of Zimmerit on Item 35194 1/35 scale German Tiger I Mid Production and Item 35146 German Tiger I Late Production. By simply applying the stickers on the model and painting, a realistic Zimmerit effect can be achieved.
Military figures & Accessories 1:35
1:35 Zimmerit Sheet KingTiger Henschel
300012648€11.99
Article number: 300012648 Product: 1:35 Zimmerit Sheet KingTiger Henschel Simulating Zimmerit on military models using puttyenhances the model’s presence but at the same time it requires advanced skills and is time consuming. These stickers enable reproduction of Zimmerit on Item 35164 German King Tiger "Production Turret." About the Item • Zimmerit Sticker Sheet x1 • Compatible with 1/35 German King Tiger Production Turret" (35164)
Military figures & Accessories 1:35
1:35 Zimmerit Sheet Panther G Early
300012646€13.49
Article number: 300012646 Product: 1:35 Zimmerit Sheet Panther G Early Simulating Zimmerit on military models using putty enhances the model's presence but at the same time it requires advanced skills and is time consuming. Made for the novice to intermediate modeler in mind, these stickers enable reproduction of Zimmerit on Item 35170 German Panther Ausf.G Early Production without the use of putty or more advanced modeling techniques.
Model ships 1:350
1:350 Jap. Schlachtschiff Yamato
300078025€290.00
Article number: 300078025 Product: 1:350 Jap. Schlachtschiff Yamato Based on the latest historical research, this famous WWII battleship has been reproduced down to the finest detail in this 752mm long 1/350 scale model kit. Even parts which had not been seen before in model form, such as the turret barbettes, have been reproduced as Tamiya challenges conventional ship model standards. This model accurately depicts the Yamato with increased anti-aircraft armament as she appeared on her final mission to Okinawa and may be assembled for either full-hull or waterline display. Two sheets of photo-etched parts for details such as ladders and cranes are also included. With this level of engineering, accuracy, and detail, this is literally Tamiya's new flagship model. Reference Booklet Included (B5 size, 32 pages) Reference Booklet which provides background information for the Yamato, descriptions of her features, and some interesting facts about the WWII Japanese Navy is included with kit.
Model ships 1:350
1:350 Brit. Battleship King George V
300178010€84.99
Article number: 300178010 Product: 1:350 Brit. Battleship King George V A Classic British Battleship This kit depicts the HMS King George V, the lead ship of her namesake class of battleships which served the Royal Navy during WWII. Her flat-sided bridge area and distinctive stern shape have been accurately reproduced. Modellers can also enjoy exploring the layout of various superstructure areas such as the navigation and compass decks. Her formidable appearance is completed by her armament of ten 14-inch guns, sixteen 5.25-inch guns, and over 100 anti-aircraft guns. The model comes with a stand and nameplate for a professional display.
Model ships 1:350
1:350 Warship Crew-Set (144)
300012622€15.29
Article number: 300012622 Product: 1/350 Warship Crew-Set (144) Recently, large 1/350 scale warships have become more popular with favorable sales of models like the Japanese Navy Submarine I-400. The 1/350 Crew Set will be released as detail up parts to complement our large 1/350 scale warships. This would surely add detail and increase interest in the models. About the model: This is a 1/350 Crew Set for warship model use. 1 Runner has a total of 48 figures (6 positions x 8 bodies) x 3 runners = 144 sailor model set Packaged in a plastic bag with header label (similar to Item: 12601) Kitmodel, Scale 1:350, Crew for Battleships, 24 Figures in 6 differ- ent poses, Painting example, Packing contains 144pcs (6x 24pcs).
Model ships 1:350
1:350 Yamato Wooden-Deck Sheet
300012645€30.99
Article number: 300012645 Product: 1:350 Yamato Wooden-Deck Sheet This set of deck sheets allows easy and beautiful reproduction of the wooden deck on Item 78025 1/350 scale Japanese Battleship Yamato. This 2-piece sticker has been pre-cut to match the shape of Yamato’s deck for easy application. Deck plank pattern is also precisely printed so there is no need for painting.
Model aircraft kits 1:48
1:48 Brit. Supermarine Spitfire Mk.I
300061119€43.99
Article number: 300061119 Product: 1:48 Brit. Supermarine Spitfire Mk.I The Supermarine Spitfire needs little introduction, one of the best-known aircraft deployed by the Royal Air Force in the Battle of Britain, as British and German forces struggled for control of the skies over the English Channel. The Mk.I had a streamlined form with elliptical wings designed for speed, and was powered by a Merlin engine. This legendary bird has received a complete makeover from Tamiya’s designers with new tooling for an updated and more accurate appearance in the 1/48 Aircraft Series! • 1/48 scale plastic model assembly kit. • Can be assembled to recreate many of the extensive Spitfire Mk.I variants. • Points of interest include superb detailing in areas such as the cockpit and panel lines. • Separate parts are used to recreate main landing gear and horizontal stabilizers. • Comes with 1 figure depicting a seated pilot. • Photo-etched parts are included to recreate radiator, oil cooler, gun sight, seatbelt components and more! • 3 marking options.
Military figures & Accessories 1:48
1:48 Diorama-Set Jerry Can&Barrel
300032510€11.79
Article number: 300032510 Product: 1:48 Diorama-Set Jerry Can&Barrel Originally used by the Germans, Jerry cans Ewere soon used by the Allies as well to transport fuel and water. Set includes drum cans, Jerry cans, bags and other equipment for use with 1/48 MMV series models. Comes with both Allied and German versions. Model kit, Scale 1:48, Jerry can, Fuel drums, Manual. Warning! Not suitable for children under 14 years.
Model aircraft kits 1:48
1:48 Fairchild Republic A-10A Thunder.II
300061028€38.49
Article number: 300061028 Product: 1:48 Fairchild Republic A-10A Thunder.II About the Fairchild Republic A-10A "Thunderbolt II" The need for close air support, on small pin point targets, was recognized early during the Vietnam conflict. Following an experimental development program begun in the early 1970's, the Fairchild Republic Industries A-10 Thunderbolt II was selected for production. The performance characteristics demanded were for operation on unimproved short fields, both high and low airspeed maneuverability, easy maintenance, long loiter times and range, excellent pilot protection, and a capacity for large mixed weapons loads. The appearance of the A-10 is remarkable while its performance is amazing. Known affectionately as the "Wart Hog" by its pilots, it's a large single seat aircraft, identified by a pair of TF-34-100A high bypass fan jet engines mounted high near the rear of the twin tailed fuselage. A few of the specifications are: Length 53' 4"; height 14'8", span 57'6"; maximum gross weight 47,400lbs, including 16,000lbs of external stores. Internal armament is the GAU-8/A 30mm Gatling cannon capable of 2100 or 4200 rounds per minute. It carries 1350 rounds of ammunition, a fire control head-up display, CRT TV monitor, laser spot seeker plus a diversified armament panel that can facilitate any operational need. The A-10 has been around since 1972, and has again proven its worth during the recent Gulf war. Warning! Not suitable for children under 14 years.
Model aircraft kits 1:48
1:48 Ger. Focke Wulf Fw190 A-8/A-8R2
300061095€38.49
Article number: 300061095 Product: 1:48 WWII Dt.Focke Wulf Fw190 A-8/A-8R2 Combating the Flying Fortresses In 1944, as the U.S. began their long range strategic bombing campaign in earnest with heavily-armed B-17 and B-24 bombers, the Luftwaffe developed the specialized "bomber-killer" R2 variant of the Fw190 A-8. Tamiya now brings you this formidable fighter in the 1/48 scale, and with all the parts included in this kit you can choose to build either the R2 variant or the A-8. About the Fw190 A-8/R2 The Focke-Wulf Fw190 was one of the Luftwaffe's best front-line fighters of WWII. Of all the different variants, the A-8 armed with four 20mm cannon and two 13mm machine guns was the most widely produced. A sub-variant of the A-8 was the R2, which had two of the 20mm cannons replaced by more powerful 30mm guns and added armor protection for its role in attacking the giant 4-engined Allied bombers. Warning! Not suitable for children under 14 years.
Model aircraft kits 1:48
1:48 Ger. Focke Wulf Fw190 D-9
300061041€28.99
Article number: 300061041 Product: 1:48 Ger. Focke Wulf Fw190 D-9 Following the successful entry of the Focke-Wulf Fw190A series of fighter aircraft over the English channel during the autumn of 1941, the German RLM requested high altitude version to complement the fighter fleet, and three projects were started. The Fw 190B used the B.M.W. 801 turbosupercharged radial engine and a pressurized cockpit, but very few of these were built. The Fw190C was powered by a 1,750hp Daimler Benz DB603A in-line engine, of which three prototypes were built. The third high altitude project was based on the Focke Wulf Fw190A airframe and powered by a Junkers engine. The fuselage was lengthened to accommodate the V-12 cylinder, liquid cooled, 1,750hp Jumo 213 engine, and made its initial flight during the winter of 1941 - 42. Five further prototypes were produced, plus small batch of Fw 190 D-Os were completed from standard production Fw 190A-7 airframes. These pre-production aircraft were followed by the Fw190 D-2 through D-8 designations. The Fw 190D-9 began production in June 1944, with early versions having the flat topped canopy, and from W. Nr. 210002 onwards having the Galland hood (blown canopy). It went into combat with the III/JG 54 "Grunherz" (Green Hearts) in September 1944, at Achmer, Germany, as top cover for the new Messerschmitt Me262 Jet fighters then entering service.
Model aircraft kits 1:48
1:48 Ger. Nachtjäg. Heinkel Uhu He219
300061057€54.99
Article number: 300061057 Product: 1:48 Ger. Nachtjäg. Heinkel Uhu He219 The He 219 was arguably the Luftwaffe's best nightfighter during WWII and was notable for an extraordinary debut mission in June 1943 when a prototype shot down five RAF Lancaster bombers. This kit depicts the final production variant, the A-7, which was equipped with DB 603G engines for improved high-altitude performance. Distinctive features such as the slim fuselage, greenhouse-style canopy, and tricycle landing gear are all accurately reproduced. The cockpit interior even features an integrated nose weight to ensure the model stays balanced when displayed. Two crew figures and three marking options are also included.
Military model vehicles 1:48
1:48 Ger. PzKpfw. 38(t) Ausf.E/F
300032583€22.49
Article number: 300032583 Product: 1:48 WWII PzKpfw. 38(t) Ausf. E/F This is a model of the German light tank 38(t) in 1/48 scale. The 38(t) was designed and entered production for the Czechoslovak Army as the LT vz. 38, however before any could be delivered Germany occupied then divided the country. They rated the tank highly, ordering continued production of the initial lot of 150, renaming it the 38(t) with (t) denoting its Czech origin. It went on to serve as the front-line tank for the Wehrmacht in early WWII, from the initial operations in Poland up to and including Operation Barbarossa, the invasion of the Soviet Union in June 1941. It wielded a 37mm gun with 90 rounds on board, a coaxial 7.92mm MG37(t) machine gun, and another MG37 on the front left of the vehicle. 42km/h was squeezed out of the 6-cylinder engine. Ausf.E/F 38(t) variants featured doubled front armor thickness at 50mm, with 30mm on the hull and turret sides. 525 were produced in the period from November 1940 to October 1941. Warning! Not suitable for children under 14 years.
Model aircraft kits 1:48
1:48 Jap. Mitsu. J2M3 Interceptor Raiden
300061018€16.99
Article number: 300061018 Product: 1:48 Jap. Mitsu. J2M3 Interceptor Raiden The J2M Raiden (Allied reporting name "Jack") was developed by the Japanese Navy in WWII as a land-based interceptor. It began to reach units from September 1944 and they were used to intercept B-29 bombers which were attacking Japan. This kit accurately depicts the J2M3 variant and allows modellers to assemble either deployed or retracted landing gear. Parts for a drop tank and two pilot figures, as well as three marking options, including a 302nd Kokutai aircraft, are included. Raiden (Jack) Warning! Not suitable for children under 14 years.
Military model vehicles 1:48
1:48 Tank destroyer Elefant
300032589€33.49
Article number: 300032589 Product: 1:48 Tank destroyer Elefant This is a 1/48 scale assembly model of the German Heavy Tank Destroyer Elephant. The newly tooled 1/48 Elefant has extensive detail, even at this smaller scale, thanks to the extensive research conducted by Tamiya's designers to make the 1/35 scale rendition. The development of the full-size Elefant is an interesting case study in weapons development. Its chassis was developed by Porsche in the design competition for the Tiger I, but while Porsche was sure enough of its success to ready 100 examples of the chassis before the end of the competition, the design was not chosen. The "left over" chassis were turned into the Elefant on the orders of Hitler in 1942 - some 90 examples were built by May 1943. With armor plates, up to 200mm thick and a powerful long-caliber 8.8cm gun, it was a formidable piece of equipment, and served German troops until the end of WWII.
Military model vehicles 1:48
1:48 US M1A2 Abrams
300032592€34.99
Article number: 300032592 Product: 1:48 US M1A2 Abrams This small-scale Military Miniature series model assembly kit recreates the formidable modern U.S. Main Battle Tank M1A2 Abrams. The Abrams has been around since the early 1980s, with constant upgrades to ensure that it stays at the cutting edge of military technology. M1A2s were introduced from 1992, developed to be chock-full of front-line technology and bring the M1 into the digital age. They featured depleted uranium armor, a modified commander’s cupola, and more, and saw action in the conflict in Iraq in 2003. Warning! Not suitable for children under 14 years.
Model aircraft kits 1:48
1:48 US North American P-51D Mustang
300061040€29.99
Article number: 300061040 Product: 1:48 US North American P-51D Mustang About the North American P-51D Mustang 8th AF In April 1940, drawings were sketched in a New York City hotel room for a new fighter aircraft for the British purchasing Commission. This fighter, the North American NA73X, became one of the best fighter aircraft in the U.S. Army Airforce during World War II, and is known as the P-51 Mustang. Of the several variations of this famous fighter, the P-51D is generally accepted as the definitive Mustang and was the first production version with the "Bubble" canopy. More "D" model Mustangs were built than all other Mustang variants combined, with a total of 9,603 coming off production lines. 45 squadrons of the famed U.S. 8th Airforce, stationed in England were equipped with the P-51D, which could now escort and protect the heavy bombers all the way to and from targets on the European continent. There were several major changes that set the "D" apart form earlier Mustangs. One was the change from four .50 caliber machine guns to six, three in each wing. Another was to mount the guns upright which helped to eliminate a jamming tendency that occurred in the four gun system. Ammunition was increased to 400 rounds per inboard gun, and 270 rounds for each of the other four. Underwing pylons were strengthened to carry the 110 or 165 gallon auxiliary drop tanks or 1,000 lb bomb. P-51D Mustangs went to fight in the later Korean conflict and it last flew combat in 1956 in the deserts to the Middle East, when Israel used Spitfires, Messerschimitts and Mustangs together in the Mid East conflict. Warning! Not suitable for children under 14 years.
Model aircraft kits 1:48
1:48 US P-38 F:G Lightning
300061120€75.99
Article number: 300061120 Product: 1:48 US P-38 F:G Lightning Lighting Strikes! The P-38 Lightning was developed by Lockheed in response to a 1937 proposal from the United States Army Air Corps. Its twin V12 engines were housed one each in twin booms that stretched back to the tailplane, flanking a central nacelle containing the cockpit and weaponry. A combination of superb range, firepower and carrying capacity ensured that the P-38 was a superior fighter-bomber, and it made a considerable impact after joining fighting in Europe in 1942. It was also active in the Pacific War from late that year, its escapades including the shooting down of Japanese Admiral Isoroku Yamamoto in 1943 that provided a significant morale boost for the Allied cause. About the Model ★This is a 1/48 scale plastic model assembly kit. Length: 240mm, width: 330mm. ★Exhaustive studies of actual P-38 aircraft enabled this precise recreation of the distinctive twin boom aircraft form, with particular highlights being early model slimline engine cowlings, wing shape and rounded canopy design. ★Integrated landing gear bay and wing spar parts ensure sturdy assembly and accurate recreation of angle. ★Choose between P-38F and P-38G canopy designs, with each able to be assembled open or closed. ★The detailed cockpit features recreations of the control wheel, bulletproof glass plate, rear-mounted radio equipment and more. ★One-piece tailplane horizontal stabilizer slides on and is secured by rudder components. ★Metallic finish decals are used on main and nose landing gear strut cylinders. ★The nose has depictions of four 12.7mm machine guns and the 20mm cannon. ★Weights are included to ensure correct balance of the model when on display. ★Comes with a seated pilot figure, two marking options and an informative background information leaflet in four languages.
Model aircraft kits 1:48
1:48 US P-38 J Lightning
300061123€75.99
Article number: 300061123 Product: 1:48 US P-38 J Lightning Our legendary 1/48 Aircraft Series welcomes a new addition in the form of the J variant of the Lockheed P-38 Lightning! The Lockheed P-38 Lightning was an American twin engine fighter aircraft produced by Lockheed; it was the first Lockheed fighter aircraft which was officially adopted into service. The P-38’s variants were used during World War II and they reached about 10,000’s production. Equipped with intercoolers under engines, the P-38J Lightning showed 1,450hp at high altitude and maximum 1,600hp, plus longer range courtesy of fuel tanks in wingtip leading edges in addition to the main fuel tank. As a result, the P-38J offered stable and astonishing performance at any altitudes, and gained great renown among American fighter aircraft.
Model aircraft kits 1:48
1:48 US Vought F4U-1A Corsair
300061070€28.99
Article number: 300061070 Product: 1:48 US Vought F4U-1A Corsair About the Vought F4U-1A Corsair After enduring heavy losses to the Japanese Navy's Zero fighters in the early stages of the Pacific War, the U.S. Navy became focused on developing new fighters capable of turning the tides of aerial combat. Among those fighters was the Corsair, first developed to be a high speed, carrier borne aircraft. Built around the new Pratt & Whitney R-2800 2000hp engine, and turning the largest propeller ever attached to a fighter plane (4m dia.), this gull-winged wonder was destined to be a success. In June 1942, the F4U-1 production models made their maiden flight. However, due to their restricted forward field of view, and because of a propeller wash effect caused them to stall left wing first during low speed landings, they first were used as land based fighters. Succeeding the F4U-1 in the summer of 1943 was the F4U-1A, which was equipped with an extended rear wheel landing gear shaft, a slightly modified glazed canopy, and a small triangular strip of metal bolted to the right leading edge of the wing to equalize the stall and avoid the roll to the left at touch-down. Despite these improvements, the new F6F Hell Cat was adopted as the main carrier-borne aircraft, and the first combat Corsairs became relegated to land based US Marine squadrons in the South Pacific. Major Boyington and 2nd Lieutenant Hanson of the U.S. Marines, Lt. Kepford of the Navy and other ace-pilots, bravely flew the F4U-1A into fierce air-combats, overpowering the Japanese Zero fighters with tremendous top speed and six 12.7mm heavy machine guns. Warning! Not suitable for children under 14 years.
Model aircraft kits 1:48
1:48 USN Douglas A1-H Skyraider
300061058€39.99
Article number: 300061058 Product: 1:48 USN Douglas A1-H Skyraider About Douglas A-1H Skyraider U.S. Navy During 1943 the U.S. Bureau of Aeronautics considered to combine the tasks of torpedo bomber and dive-bomber into one. Several aircraft manufacturers, such as Douglas and Martin, were requested to develop a large, single-seat attack aircraft. According to the requirement, Douglas Skyraider, was developed by Douglas Aircraft Company, Inc. The development was started in early July 1944, and all night efforts of engineers made the first prototype's first flight possible already on March 18, 1945. Despite the short period of the development, flight trials proved the airframe's flight characteristics satisfactory and the aircraft was rated very highly. In May 1945 a letter of intent for 598 production was signed. The name "Skyraider" was officially approved for the aircraft in February of the following year, and the distribution to units was started at the end of the same year. The Skyraider was powered by Wright R3350 radial engine yielding 2,800 horse power and equipped with three large dive brakes on the fuselage. The Skyraider had a number of types, from the AD-1 to AD-7, recording grand total number of production of more than 3,000. Among them, AD-6 was the most produced variant. The AD designation for the Skyraider was changed in 1962, and the AD-6 became the A-1H. Noted for its durability and a large capacity for external stores, the Skyraider was well liked by its pilots and crewmen. Warning! Not suitable for children under 14 years.
Model aircraft kits 1:48
1:48 WWII Douglas A-1J Skyrider USAF
300061073€43.99
Article number: 300061073 Product: 1:48 WWII Douglas A-1J Skyrider USAF About the Douglas A-1J Skyraider U.S. Air Force Also going by the names Dauntless II, AD, A-1 Able Dog, and Spad, the Douglas Skyraider saw almost 30 years of service. The Skyraider's development started in June 1944. Not completed in time for WWII, its first combat came with the outbreak of the Korean War in June 1950. The first production version to roll out of the Douglas factory was designated the AD-1. Twelve years and seven versions later, over 3200 Skyraiders had been produced. Among those, the AD-6 version, also known as "Able Dog Six", was produced in the greatest numbers. The next and final version of the Skyraider, the AD-7, was extremely identical to the AD-6, but it had reinforced wing spars and wing fittings, as well as the strongest landing gear of all the variants. The AD-7 housed the new wright R-3350-26WB engine, which enabled a top speed of 285 knots. Due to a directive to standardize the designation of Navy and Air Force aircraft, AD-6 and AD-7 became known as A-1H and A-1J respectively. In 1965, when U.S. air operations in Vietnam became more aggressive, literally hundreds of Skyraiders, including the A-1J, were deployed to the 14th and 56th Special Operations Wings (SOW). Armed with Mk.82 and Mk.117 bombs, 20mm wing-mounted cannons, and rocket launchers, the Skyraiders were used in a wide variety of combat missions.
Model motorcycle kits 1:6
1:6 Honda CB750F 1979
300016020€105.00
Article number: 300016020 Product: 1/6 Honda CB750F 1979 This is a 1/6 scale plastic assembly kit model of the Honda CB750F, which quickly gained popularity after its release in 1979. ★The beautiful curved lines of the bike have been realistically reproduced. ★The air-cooled inline 4-cylinder 4-carburetor engine features detailed cooling fins and spark plug cables which are depicted with vinyl tubing. ★The metal front forks have a beautiful metal plated finish and coil springs that enable it to move. ★Exhausts also feature a smooth metal plated finish. ★In addition, side covers are removable to showcase the internal mechanisms even after assembly. Warning! Not suitable for children under 14 years.
