5 22

Categories


Sort by:

Top sellers
  • Top sellers
  • New
  • Price ascending
  • Price descending
Filter

  • 1:48
Filter
Price
Category
Brand
Brands & licenses
Scale
1:48 Mitsu. A6M3 Zero Fighter T32 Hamp

1:48 scale

1:48 Mitsu. A6M3 Zero Fighter T32 Hamp

€14.99

Article number: 300061025 Product: 1:48 Mitsu. A6M3 Zero Fighter T32 Hamp About the A6M3 Type 32 Zero Fighter (HAMP) Much has been written over the years about the Japanese Zero Fighter Aircraft series. Much was based upon hearsay and legend and little upon fact itself. Even the Allied Forces and governments refused at first to acknowledge its existence, and when they did get a copy of it, they could hardly believe the performance it produced. The prototype zero or A6M1 first took place on paper on January 17, 1938, following the Japanese request for a shipboard fighter with a top speed of 27o kph at 12000 ft 7 6-8 hours of cruise economy endurance and 1.5-2 hours at normal combat speeds. Armament was to be two 20mm cannon and two 7.7mm machine guns plus the normal radio equipment and direction finding gear. These specifications wee so far from the existing state of the art that the famous Nakajima Company dropped out of competition, stating that they were impossible to meet. That left Mitsubishi Heavy Industries and their design team headed by Jiro Horikoshi the only company to tackle the problem. First flight was on 1 April 1939 and combat trials were concluded in July 1940 with 15 pre-production A6M2's sent to two squadrons by the end of the month. These aircraft had folding wing tips to accommodate aircraft carrier elevators, and were the ones first seen by Gen. Chennault in China, and at Pearl Harbor in December 1941. Although the A6M2 met or exceeded original design specifications, modifications were taking place at the Mitsubishi factory to improve roll rate, speed up handling aboard carriers, and utilize the uprated Sakae 21, 1,130 hp engine. The first A6M3 type 32 (code named HAMP) took to the air on 15 July 1941 with production beginning in April 42. A total of 343 aircraft were produced by August 43, when the type 52 A6M5 began production. The Type 32 Zero had the most radical change in the entir

More
1:48 Ger. PzKpfw. 38(t) Ausf.E/F

1:48 scale

1:48 Ger. PzKpfw. 38(t) Ausf.E/F

€18.99

Article number: 300032583 Product: 1:48 WWII PzKpfw. 38(t) Ausf. E/F This is a model of the German light tank 38(t) in 1/48 scale. The 38(t) was designed and entered production for the Czechoslovak Army as the LT vz. 38, however before any could be delivered Germany occupied then divided the country. They rated the tank highly, ordering continued production of the initial lot of 150, renaming it the 38(t) with (t) denoting its Czech origin. It went on to serve as the front-line tank for the Wehrmacht in early WWII, from the initial operations in Poland up to and including Operation Barbarossa, the invasion of the Soviet Union in June 1941. It wielded a 37mm gun with 90 rounds on board, a coaxial 7.92mm MG37(t) machine gun, and another MG37 on the front left of the vehicle. 42km/h was squeezed out of the 6-cylinder engine. Ausf.E/F 38(t) variants featured doubled front armor thickness at 50mm, with 30mm on the hull and turret sides. 525 were produced in the period from November 1940 to October 1941.

More
1:48 Ger. Focke Wulf Fw190 A-3

1:48 scale

1:48 Ger. Focke Wulf Fw190 A-3

€25.99

Article number: 300061037 Product: 1:48 Ger. Focke Wulf Fw190 A-3 The Focke-Wulf Fw 190 served alongside the Messerschmitt Bf 109 to defend Germany from the mid stages of WWII to the end of the war. This kit reproduces the A-3 variant of the Fw 190, which outclassed the RAF's Spitfire Mk.V when it entered service. The aircraft's characteristic radial engine features fine cooling fin and exhaust details. Three marking options, including an aircraft flown by German ace Hans Hahn, are included.

More
1:48 Diorama-Set Jerry Can&Barrel

1:48 scale

1:48 Diorama-Set Jerry Can&Barrel

€10.99

Article number: 300032510 Product: 1:48 Diorama-Set Jerry Can&Barrel Originally used by the Germans, Jerry cans Ewere soon used by the Allies as well to transport fuel and water. Set includes drum cans, Jerry cans, bags and other equipment for use with 1/48 MMV series models. Comes with both Allied and German versions.

More
1:48 Fieseler Fi156C Storch (Foreign AF)

1:48 scale

1:48 Fieseler Fi156C Storch (Foreign AF)

€59.99

Article number: 300025158 Product: 1:48 Fieseler Fi156C Storch (Foreign AF) The Fieseler Fi156 Storch was one of the Germany’s representative aircraft during WWII. It had a lightweight construction made up with a cloth-covered steel pipe airframe and wooden wings. Blessed with excellent STOL (Short Take-Off and Landing) performance, it was used for various duties such as liaison, spotting, and reconnaissance. The Fi156 was also used by a number of other countries such as Switzerland, Italy, and Hungary and some aircraft were used even after the war ended. About the Item • 1/48 scale plastic assembly kit. • The slim form of the Fi156 and features such as the canopy area and broad wing span have all been accurately reproduced. • Metal frame parts for wing and landing gear included. • Highly detailed cockpit features photo-etched parts for side panels and armor plate. • Engine cowlings can be detached even after assembly to showcase the detailed Argus As10C engine. • Boarding hatch can be depicted in either open or closed position while flaps can be depicted in either up or down position. • 5 marking options included to depict Swiss Air Force (x3), Italian Air Force (x1), and Hungarian Air Force (x1) aircraft. • Canopy masks also conveniently included.

More
1:48 Figure-Set Ger. Pz. Grenadi. (15)

1:48 scale

1:48 Figure-Set Ger. Pz. Grenadi. (15)

€14.99

Article number: 300032514 Product: 1/48 WWII Figure-Set Ger.Pz.Grenadi.(15) German Figures Set Part 2 Adding a 3rd figure set to our popular 1/48 MM Series, this selection features Late WWII German Panzer Grenadiers together with tank crewmen and a driver and officer figure specially designed for displaying with 1/48 scale light vehicles such as the Schwimmwagen. About the Uniforms The German army in WWII is known for employing a wide variety of advanced and creative camouflage uniforms. One example is the reversible camouflage smock which featured a spring pattern on one side, and fall pattern on the other. The M44 fatigues issued from spring 1944 featured pea pattern camouflage of green, gray, brown and black spots on a neutral background. German troops such as Panzer grenadiers used this uniform, together with a variety of camouflage smocks, in the latter part of the war. Armored crews initially wore black fatigues, but began using camouflage uniforms from the middle of the war. While some units favored black leather jackets, the hooded combat jacket issued in 1942 was used widely until the closing days of WWII.

More
1:48 Ger. Kübelw.Typ82 Pkw.K1 Afrika

1:48 scale

1:48 Ger. Kübelw.Typ82 Pkw.K1 Afrika

€12.99

Article number: 300032503 Product: 1:48 Dt. Kübelw.Typ82 Pkw.K1 Afrika One of the most widely used WWII vehicles, the Kübelwagen Type 82 featured a lightweight monocoque body, four wheel independent torsion bar suspension and a 23.5hp air-cooled 4 cylinder 985cc engine. Based on Dr. Ferdinand Porsche's Volkswagen, the Type 82 possessed excellent maneuverability and handling, serving as a multi-purpose vehicle for the army as well as the Luftwaffe (air force). In total over 50,000 units were produced during WWII, with slight variations between models including shape of rear fender, under guard, turn signals and exhaust layout. The Kübelwagen was first deployed to the North Africa campaign in 1941, with a specialised Africa Corps version featuring balloon tires going into production from 1942. Designed to be more suited to desert conditions, the Africa Corps model was used during both the North Africa and Italian campaigns. Overall length: 79.5mm, overall width: 33.5mm Bonnet, short fender, balloon tires and other distinctive characteristics of the Africa-Corps Kübelwagen have all been authentically reproduced 1 driver and 1 pilot figure wearing shorts and rolled sleeve shirt included Decals for 5 different markings Perfect for diorama with German aircraft from the 1/48 Aircraft Series such as the Messerschmitt Bf109E-4/7 Trop

More
1:48 Matilda Mk.III/IV British Infantry

1:48 scale

1:48 Matilda Mk.III/IV British Infantry

€30.99

Article number: 300032572 Product: 1/48 Matilda Mk.III/IV British Infantry This is a 1/48 scale plastic assembly model of the British Matilda previously available in 1/35 scale. Historical background: The Matilda was developed as a heavily armored infantry tank and was one of the British Army's main tanks in North Africa during WWII. The Matilda swept aside opposing Italian tanks and was respectfully called the "Queen of the Desert" by German forces. During Operation Battle axe to lift the siege of Tobruk in June 1941, German forces famously used their 88mm AA guns in the anti-tank role as they were the only effective counter against Matildas.

More
1:48 ME Swiss Bf109 E-3

1:48 scale

1:48 ME Swiss Bf109 E-3

€26.99

Article number: 300025200 Product: 1:48 ME Swiss Bf109 E-3 ★This special edition kit allows recreation of one of the Bf109 E-3 aircraft operated by Swiss forces during and after WWII. ★Includes markings to recreate the bright Swiss flag designs that were applied to stop them being mistaken for German Luftwaffe aircraft. ★Comes with two marking options in total. ★Features a full colour painting guide to assist in the creation of your masterpiece, plus a dedicated background story. ★Comes in a white package with printed color product label ★Choose open or closed canopy when assembling. ★Includes a pilot figure to add an extra level of detail to your model

More
1:48 Rus. T-55 Battle Tank

1:48 scale

1:48 Rus. T-55 Battle Tank

€23.99

Article number: 300032598 Product: 1:48 Rus. T-55 Battle Tank Here is the latest addition to the ever-growing 1/48 Military Miniature Series, creating the mass-produced masterpiece T-55 medium tank that not only provided a base for later T-62, T-72 and T-80 designs still in use today, it spurred Western rivals on and contributed to the great East-West arms race of the Cold War. Its 100mm gun compared favorably with the West’s 90mm counterpart, and with HEAT rounds could defeat up to 390mm of armor. The T-55 was produced in the USSR, and under license in Czechoslovakia and Poland, and supplied to Soviet countries and clients worldwide – it even faced off against U.S.-designed M48s and M60A1s in the Middle East. About the Model • This is a 1/48 scale plastic model assembly kit. Length: 190mm, width: 69mm. • The low, refined T-55 form with hemispherical turret and 100mm gun is captured artfully in compact 1/48 scale. • Features authentic recreations of weld lines and cast turret surfaces. • The 100mm main gun and anti-aircraft machine gun give a realistic finish. • Assembly type tracks have single piece straight sections. • Comes with a commander torso figure surveying the scene in front, and decals to create a single marking option.

More
1:48 Sd.Kfz 232

1:48 scale

1:48 Sd.Kfz 232

€27.99

Article number: 300032561 Product: 1:48 Sd.Kfz 232 During the first half of WWII, German reconnaissance units greatly used the Sd.Kfz.231 series heavy armored car. Above all, the Sd.Kfz.232 was equipped with a Fu.11 radio and featured a large frame-type antenna mounted on the body. It also came armed with a KwK30 20mm cannon and an MG34 machine gun mounted on its turret. The 8-wheeled Sd.Kfz.232 had an on-road top speed of 90km/h, featured elaborate front and rear driving positions, and a superb 8-wheel drive system. These 8-wheeled armored cars were deployed to armored reconnaissance battalions of Panzer divisions and served as the eyes of the German army from Europe and North Africa to the Russian front. The Tamiya 1/48 scale model kit carefully captures all the fine detail of the full size subject. This subject was only previously available in 1/35 scale and it's now part of the Tamiya 1/48 scale model collection.

More
1:48 Sd.Kfz.251/1 "Stuka z.Fuss" Halftr.

1:48 scale

1:48 Sd.Kfz.251/1 "Stuka z.Fuss" Halftr.

€24.99

Article number: 300032566 Product: 1:48 Sd.Kfz.251/1 "Stuka z.Fuss" Halftr. In 1931, the German Arm Weapons Agency began to research rocket technology. In 1941, the NbW 41 28/32cm rockets were the first rockets deployed to the front lines. These rockets could be launched from their simple launch frames. During WWII, the German army used the Sd. Kfz 251/1 as a mobile rocket launcher. The vehicle was equipped with five NbW 28cm rockets ad one NbW41 32cm rocket. Due to the destructive capability of these vehicles, the Sd. Kfz 251/1 was nicknamed "Stuka zu fuss" or "Ground Stuka", which referred to Luftwaffes Stuka dive-bomber.

More
1:48 US 2.5to 6x6 Airf. Fuel Truck (2)

1:48 scale

1:48 US 2.5to 6x6 Airf. Fuel Truck (2)

€25.99

Article number: 300032579 Product: 1:48 US WWII 2.5to 6x6 Airf. Fuel Tr.(2) The model US Airfield Fuel Truck - 2 1/2 Ton 6x6 in 1/48 scale has a length of about 107 mm. What better subject to compliment your 1/48 scale diorama than this U.S. airfield fuel truck model. The model is a modification of Item 32548 US 2.5 Ton 6x6 Cargo Truck and depicts a fuel truck typical of those that would have served during WWII.

More
1/48 British 7ton AC Mk.IV

1:48 scale

1/48 British 7ton AC Mk.IV

€18.99

Article number: 300032587  Product: 1/48 British 7ton AC Mk.IV

More
1/48 German Horch 1a

1:48 scale

1/48 German Horch 1a

€22.99

Article number: 300032586 Product: 1/48 German Horch 1a The Horch 1a was developed in accordance with the pre-WWII "Einheits Program," which aimed at streamlining vehicle production. The soft-top vehicle could carry 8 crew members, and had a V8 engine providing 80hp. It possessed a range of 400km, and was given an oversized radiator to help it battle on in tough environments such as North Africa. Another notable feature was the 120-liter fuel tank, split in two around the prop shaft. Around 2,900 were produced between 1937 and 1940; the Type 1a was used heavily in the early stages of WWII.

More
1/48 JGSDF Type 16 MCV

1:48 scale

1/48 JGSDF Type 16 MCV

€27.99

Article number: 300032596 Product: 1:48 JGSDF MCV Type 16 (8x8) (1) This scale model assembly kit recreates the Japan Ground Self Defense Force (JGSDF) Type 16, which reached units beginning in 2017. An 8-wheel vehicle, the JGSDF classify it as a Maneuver Combat Vehicle (MCV), a highly mobile and well-armed vehicle intended to provide supporting fire and take on enemy armor as a part of rapid response units. Its domestically designed L/52 105mm rifled gun is a low-recoil piece with perforated muzzle brake and a fire control system to enable accurate firing on the move. Rolled steel turret and hull employ modular and spaced armor estimated to be able to survive frontal hits from 20-30mm class guns and portable anti-tank weapons. Thanks to its 570hp engine, the 26-ton Type 16 has a top speed of around 100km/h and significant range; it looks set to provide a major boost to JGSDF units as its rollout continues. • 1/48 scale plastic model assembly kit. Length: 176mm, width: 63mm. Model has a dedicated parts breakdown for a hassle-free build without sacrificing accuracy. • An accurate rendering is based upon extensive research of the actual Type 16, authentically capturing the modern silhouette with a moving depiction of the 105mm gun. • Features crisp molding on details such as non-slip surfaces, plus multi-piece machine gun and mount. • The 8-wheel suspension is depicted in style, with fixed wheels. Elastomer tires have a realistic tread pattern. • Decals are included to recreate periscope openings and muzzle brake perforations. • Comes with one commander figure and two marking options.

More
1/48 Panther Ausf.D

1:48 scale

1/48 Panther Ausf.D

€27.99

Article number: 300032597 Product: 1/48 Panther Ausf.D This 1/48 scale military miniature model kit recreates the Panther Ausf.D, the very first variant of the highly-rated German tank. Developed partly in answer to the Soviet T-34, the Panther offered a complete performance package, with an imposing L/70 7.5cm gun, sloped armor for superior survivability, and excellent maneuverability. Around 840 Ausf.D Panthers were produced between January and September 1943. • 1/48 scale plastic model assembly kit. Length: 186mm, width: 73mm. • The refined design of the Panther Ausf.D is accurately captured, taking in the sloped armor and 7.5cm gun. • Cast mantlet texture and weld lines are depicted with high detail. • Die-cast hull. • Assembly type tracks feature one-piece straight sections. • Parts are included to recreate Schürzen side armor, and accessories like tool racks, gun cleaning rod case, smoke dischargers and more. • Commander torso figure included, plus two marking options for vehicles in the Battle of Kursk.

More
1/48 SS-100 & 88mm Flak37

1:48 scale

1/48 SS-100 & 88mm Flak37

€39.99

Article number: 300037027 Product: 1/48 SS-100 & 88mm Flak37 The SS-100 was a heavy tractor used by German forces from the mid-1930s, originally a commercial design but also effective in military service throughout WWII thanks to an ability to haul up to 20 tons. Among a wealth of candidates, one of its passengers really stands out - the mighty 88mm gun, which was used against Allied forces with devastating effect. The Flak37 was a powerful 1937 variant, with sights updated from predecessors, and a large shield added from 1940. About the Model ★This is a 1/48 scale plastic model assembly kit set. SS-100 length: 114mm; 88m gun length (towed): 169mm. ★The sturdy SS-100 form is recreated with aplomb. ★Integrated cabin parts make for a fuss-free, accurate assembly. ★The complex Flak37 88mm gun is captured with realism. ★Transport wagon is also depicted. ★Comes with five figures and three marking options. *88mm gun parts are a product of Italeri.

More
1:48 Bristol Beaufighter Mk.6

1:48 scale

1:48 Bristol Beaufighter Mk.6

€31.99

Article number: 300061053 Product: 1:48 BRISTOL BEAUFIGHTER MK.6 About the Bristol Beaufighter Mk.VI Bristrol's "Beaufighter" was one of the most successful and widely used twin engines fighter types during WW2. The first series production Beaufighter MK.1 entered service in September 1940. With its four nose-mounted 20mm cannons and six 7.7mm machine guns in the wings, this stub-nosed fighter became the most heavily armed aircraft in service with the RAF during the war. As the German Luftwaffe eventually turned to night bombing in autumn of 1940, priority was put on night fighters and the first operational Beaufighters were fitted with the Airborne Interception (AI) radar, which designated the Mk.1F (F was suffix for Fighter Command). Meanwhile, its rugged construction was thought ideal for long range fighting and escort duties, and the Mk.1C under the Coastal Command became ready for initial operations in late March 1941. Introduction of the more powerful, 1,670hp Hercules VI engines by late 1941 resulted in the Mk.VI. A 7.7mm machine gun being added in the observers canopy for rearward defense, and the horizontal tail plane was modified to have a 12 degree of dihedral, to eliminate the unstable characteristics observed on the preceding types. The Beaufighters saw active service not only above Europe but also in the Mediterranean, North Africa, Middle East and Pacific area. More than 5,900 Beaufighters of various types were produced.

More
1:48 Brit. Armo. scout car Dingo II

1:48 scale

1:48 Brit. Armo. scout car Dingo II

€14.99

Article number: 300032581 Product: 1:48 Brit. Armo. scout car Dingo II This British armored scout car boasted enviable maneuverability and armor up to 30mm thick on its compact hull. Often referred to by its nickname of "Dingo", delivery of the Mk.I variant began in 1939; the later Mk.II featured various modifications, including an overhaul of the steering system. All told, more than 6,600 "Dingoes" were manufactured until 1945, serving in a range of locations in both reconnaissance and command car roles. About the Model This is a 1/48 scale plastic model assembly kit of the "Dingo" Mk.II. - Length: 69mm, width: 37mm. - The lightweight and compact form with distinctive flat panels is authentically recreated. - The model can be assembled with folding roof in open or closed position. - Suspension is realistically depicted with intuitive parts makeup. - Commander and driver figure are included in realistic action pose. - Contains one set of markings to recreate a vehicle in combat in Europe.

More
1:48 Brit. Crusader Tank Mk.III & IV

1:48 scale

1:48 Brit. Crusader Tank Mk.III & IV

€31.99

Article number: 300132555 Product: 1:48 WWII Brit.Panzer Crusader Mk.III&IV During WWII at the North African front, the Crusader tank became the main force for the British Tank Corps and often faced off against the German Panzer III. The Crusader Mk.III came with reinforced front armor and a new powerful 6-pounder gun to help deal with the Panzer III. The Crusader tanks were first put into action in the autumn of 1942 at El Alamein, Egypt. Later after the long chase and even at the large scale Tunisia front, the Crusader Mk.III tanks contributed greatly to the allied victory over the Axis forces.

More
1:48 Brit. M10 IIC Achilles Tank dest.

1:48 scale

1:48 Brit. M10 IIC Achilles Tank dest.

€23.99

Article number: 300032582 Product: 1:48 WWII British M10 IIC Achilles Britain was supplied with a number of American M10 tank destroyers under the Lend-Lease programme. The M10 was based upon the famed M4 Sherman tank, but with lighter and more highly sloped armor which allowed the M10 to reach higher speeds. The British switched the original U.S. 3-inch gun with their own powerful 17-pounder on over 1,000 M10s, changing the name to IIC, or sometimes "Achilles". While the new gun required a muzzle brake to be fitted onto the vehicle, other modifications were limited to thicker front and side armor, plus a turret-top shield. With this year marking the 70th anniversary of the D-Day operations, the Achilles provides a timely new face for the 1/48 Military Miniatures series. About the Model • This is a 1/48 scale plastic model assembly kit. Length: 152mm, width: 63mm. • The form of the Achilles with British 17-pounder gun and characteristic "duck bill" muzzle brake is faithfully recreated. • The model depicts a late production version of the tank destroyer with suspension bogies raised upon support roller brackets. • The open top fighting department is authentically reproduced using a limited number of parts. • Includes markings to recreate an Achilles which took part in the Normandy landings that were central to the D-Day operation. • Features a plastic lower hull.

More
1:48 Brit. Supermarine Spitfire Mk.I

1:48 scale

1:48 Brit. Supermarine Spitfire Mk.I

€37.99

Article number: 300061119 Product: 1:48 Brit. Supermarine Spitfire Mk.I The Supermarine Spitfire needs little introduction, one of the best-known aircraft deployed by the Royal Air Force in the Battle of Britain, as British and German forces struggled for control of the skies over the English Channel. The Mk.I had a streamlined form with elliptical wings designed for speed, and was powered by a Merlin engine. This legendary bird has received a complete makeover from Tamiya’s designers with new tooling for an updated and more accurate appearance in the 1/48 Aircraft Series! • 1/48 scale plastic model assembly kit. • Can be assembled to recreate many of the extensive Spitfire Mk.I variants. • Points of interest include superb detailing in areas such as the cockpit and panel lines. • Separate parts are used to recreate main landing gear and horizontal stabilizers. • Comes with 1 figure depicting a seated pilot. • Photo-etched parts are included to recreate radiator, oil cooler, gun sight, seatbelt components and more! • 3 marking options.

More
1:48 Ger. Battle Tank Panther Type G

1:48 scale

1:48 Ger. Battle Tank Panther Type G

€27.99

Article number: 300032520 Product: 1:48 Ger. Battle Tank Panther Type G About the Panther G Developed as a countermeasure to the Soviet T-34, the German Panther tank was produced from 1943 until the end of the war and served alongside the Panzer III, IV and Tiger tanks. The Panther tank featured sloped armor, powerful 700hp Maybach engine and a turret placed far back on the hull mounting a 75mm L/70 cannon. The main gun was even more devastating than its size of 75mm would suggest, due to the large propellant charge and long barrel with high muzzle velocity. Many consider the Panther every bit as effective as the Tiger I, but easier to produce and maintain. The Ausf.G included versions with heater unit installed over the left engine fan, and with lower lip piece added to mantlet to eliminate shot trap. About the Model ★1/48 scale assembly model of the Panther Ausf.G tank. ★Rich variety of optional parts allows construction of early or late version Panther G. ★Choice of two types of mantlet, with or without lower lip piece. ★Install muffler with or without flash suppressor. ★Reproduces heater unit used for winter operations. ★Assembly type tracks with straight upper and lower parts made of single pieces. ★Choice of 4 sets of markings 1/48 German Panther G

More
1:48 Ger. Bf109 G-6 Messerschmitt

1:48 scale

1:48 Ger. Bf109 G-6 Messerschmitt

€43.99

Article number: 300061117 Product: 1:48 Ger. Bf109 G-6 Messerschmitt This precision model aircraft assembly kit depicts the Messerschmitt Bf 109 G-6 variant. It compliments Tamiya’s other variants such as the E-3 and E-4/7 Trop. The Bf 109 is a legendary name in aviation, an aircraft which combined longevity and versatility in the hands of the Luftwaffe and other air forces. The G-6 was the most prolifically produced Bf 109, accounting for more than a third of the total. Introduced in early 1943, it could be fitted with underwing 20mm cannons in pods, or synchronized 13mm machine guns in distinctive bulges ahead of the cockpit, and was powered by the Daimler-Benz DB605A liquid-cooled V12, which gave a top airspeed of 640km/h.

More
1:48 Ger. Fig.-Set air force (5)

1:48 scale

1:48 Ger. Fig.-Set air force (5)

€22.99

Article number: 300032412 Product: 1/48 Luftwaffe & Kettenkraftrad This product takes a modern figure set from ICM and powers it up by adding Tamiya accessories and instructions, in a new Tamiya package! It recreates crew from the Luftwaffe, the famed WWII German air arm which of course included not only pilots but also a whole range of recruits in supporting roles. • This is a 1/48 scale plastic model assembly kit. • Comes with parts for 5 figures: 2 pilots, 2 mechanics (one carrying a bomb, one spray-painting) and a sentry. • Realistic poses give the figures a highly authentic air. Winter gear such as the fur collared pilot’s jackets, heavy sentry’s coat, and winter boots are depicted with aplomb. • Also features a number of accessories such as tools and a sentry post. • Includes Tamiya parts to recreate the Kettenkraftrad and accessories such as oil drums, jerry cans, folded sheets, buckets and more. • Why not pair with Tamiya WWII aircraft models in 1/48 for a detailed and vivid diorama? • Figure parts are a product of ICM.

More
1:48 Ger. Heavy Tank Destroyer Early Pr.

1:48 scale

1:48 Ger. Heavy Tank Destroyer Early Pr.

€31.99

Article number: 30003269 Product: 1:48 Ger. Heavy Tank Destroyer Early Pr. 1943 saw the production of the worlds heaviest and most powerful tank of its time, the Jagdtiger. Pro-duced by Henschel, it was based on the King Tiger's chassis and featured a long barreled 12.8cm gun which showed great offensive capabilities being able to knock out Allied tanks from a great distances. Along with its new design, the large sized fixed fighting compartment was given a 250mm thick front defensive armament which was unique to this tank. First appearing at the Ardennes offensive in December 1944, the Jagdtiger mostly fought against Allied forces in Western Germany from January 1945. Up until April 1945, more than 80 Jagdtigers and another ten with "Porsche turrets" were produced.

More
1:48 Ger. Heinkel He162A-2 Salamander

1:48 scale

1:48 Ger. Heinkel He162A-2 Salamander

€36.99

Article number: 300061097 Product: 1/48 WWII Dt.Heinkel He162A-2 Salamander The Luftwaffe's Last Hope As the situation became more desperate for the German forces near the end of WWII, a call was made for a new inexpensive jet fighter that would be simple to produce and fly. In the amazingly short span of 3 months from drawing board to first flight of the prototype, Heinkel produced the small, sporty-looking He162. The lightweight fighter featured mainly wooden construction and was powered by a BMW003 turbojet, which made it the fastest jet fighter of WWII with its 838km/h top speed. Reaching combat units in late March 1945, the little fighter managed to record some combat successes despite the acute fuel and parts shortage. About the Model High-quality assembly kit display model of the He162 A-2 "Salamander" jet fighter. ★Length: 205mm, Width: 149mm ★Top-mounted BMW003 turbojet engine with parts for opened and closed engine bay covers to allow full display of internal details. ★Special dolly included to display the engine separate from the aircraft. ★Canopy can be posed in the open or closed positions, and the ejector seat is removeable. ★Includes 1 pilot figure and 4 types of markings.  

More
1:48 Ger. Schwimmwagen Typ166 Pkw.K2

1:48 scale

1:48 Ger. Schwimmwagen Typ166 Pkw.K2

€15.99

Article number: 300032506 Product: 1:48 Ger.Schwimmwagen Typ166 Pkw.K2 About the Schwimmwagen Designed by Dr. Ferdinand Porsche, the amphibious Schwimmwagen was used by the German land forces, paratroopers and engineering corps during WWII, fulfilling both reconnaissance and liaison duties. Capable of both 2 and 4 wheel drive, the Schwimmwagen was widely respected for its ability to maneuver on a variety of difficult terrain. Featuringa high-set exhaust pipe and a rear mounted 25hp air-cooled 4-cylinder 1,130cc engine, the Schwimmwagen could reach top speeds of up to 80km/h on land and 10km/h in water. Propelled in the water by a screw propeller, which was easily raised above the rear engine deck when driven on dry land, steering whilst in the water was done just like on land, using the front wheels as rudders. Mass-produced from 1942, 14,276 type 166 Schwimmwagen were produced by the end of 1944.

More
1:48 Ger. Sturmtiger 38cm

1:48 scale

1:48 Ger. Sturmtiger 38cm

€27.99

Article number: 300032591 Product: 1:48 Ger. Sturmtiger 38cm The Tamiya 1/35 Military Miniatures Sturmtiger is a classic kit that has been around for decades. The 1/48 scale version has received all new tooling and further extends the long line-up of kits offered in this smaller scale! The Sturmtiger was a seldom-seen variant of the Tiger I, using existing chassis and suspension to mount a mammoth 38cm caliber mortar for use against buildings and other fortifications in urban warfare. Only an estimated 18 were ever produced, between August and December 1944, and they were somewhat unwieldy in that they weighed around 65 tons. Nonetheless, they would still have proved a frightening foe to those who encountered them in the Battle of the Bulge, the Warsaw Uprising and the invasion of the German homeland.

More
1:48 Ger. Tiger I Late Prod.(Tentative)

1:48 scale

1:48 Ger. Tiger I Late Prod.(Tentative)

€29.99

Article number: 300032575 Product: 1/48 Germ. Tiger I Late Prod.(Tentative) The German Tiger I Tank featured a powerful 88mm gun as well as excellent armor and was the greatest opponent to Allied forces during WWII. The late production version incorporated large steel road wheels with built-in rubber rings and an overhauled turret with periscope in front of the loader's hatch, the commander's viewport replaced by seven individual periscopes, and ventilators moved to the center for improved efficiency. Tamiya now brings this iconic kit, previously only available in 1/35 scale, to the 1/48 Military Miniature Collection series line-up.

More
1:48 Ger. V-1 Fiseler Fi103

1:48 scale

1:48 Ger. V-1 Fiseler Fi103

€12.99

Article number: 300061052 Product: 1:48 Ger. V-1 Fiseler Fi103 Powered by a pulse jet engine, the unmanned V-1 flying bomb developed by Germany during WWII would reach speeds of 640km/h, fly a certain distance, then crash and explode. This kit reproduces the simple form of this weapon and also includes parts to depict a transport trolley.

More
1:48 Ger.Flakpanzer Möbelwagen Flak 43

1:48 scale

1:48 Ger.Flakpanzer Möbelwagen Flak 43

€24.99

Article number: 300032573 Product: 1/48 Ger.Flakpanzer Möbelwagen Flak 43 In the latter half of World War II, the Wehrmacht, having lost air superiority to the Allies, rushed to develop anti-aircraft vehicles. One of these was the Möbelwagen, which was the first self-propelled anti-aircraft gun that utilized the Panzer IV chassis. The prototype, which was equipped with four 2cm Flak guns, was completed in December 1943 and the mass production version, which was equipped with a single, more effective 3.7cm Flak43 capable of firing 250 rounds per minute, was put in production in February 1944. The four large armor plates surrounding the superstructure of the vehicle could be lowered to 60° in anti-aircraft firing position and lowered completely to enable an unimpeded horizontal field of fire against ground targets. By March 1945, a total of 240 vehicles were produced, most of which were deployed to the Western front to defend against Allied fighter-bombers. About the Model • 1/35 scale plastic assembly model kit. • The unique design of the Möbelwagen with 3.7cm Flak43 has been realistically reproduced. • Armor plates may be assembled in one of three positions: raised, anti-aircraft firing position, and fully lowered. • Assembly-type tracks feature one-piece straight sections. • Weights inside the hull give the model greater heft. • Comes with a standing crew figure.

More
1:48 Grumman F-14D Tomcat

1:48 scale

1:48 Grumman F-14D Tomcat

€100.00

Article number: 300061118 Product: 1:48 Grumman F-14D Tomcat • This is a 1/48 scale plastic model assembly kit. Fuselage length: 398mm, wingspan: 408mm (with variable sweep wing in fully forward position). • Tamiya designers spent many hours close up with real aircraft to obtain a highly accurate end product. • Captures F-14D-specific features such as the engine afterburner nozzles, vertical stabilizers and even minute panel lines. • A detailed cockpit includes depictions of updated instrument panels and ejection seats. • Model parts depict late variants of Phoenix, Sparrow and Sidewinder air-to-air missiles. Also included are parts for drop tank, laser- and GPS-guided bombs, LANTIRN targeting pod, TARPS reconnaissance pod and jamming pod – a comprehensive line-up. • Features moving depiction of variable sweep wing. 2 sets of parts - interchangeable after completion - depict sealing plates and air bags with wing in fully swept and fully forward positions. • Slide molding was used to ensure highly realistic canopy, air intake side and fuselage side sections. • Poly caps allow movement of horizontal stabilizers. • Comes with realistic figures depicting pilot and RIO (Radar Intercept Officer) in seated pose. • Includes high-quality decals to realize 4 (planned) marking options, plus a handy set of masking stickers for use when painting the canopy.

More
1:48 IJN Komatsu G40 Bulldozer (1)

1:48 scale

1:48 IJN Komatsu G40 Bulldozer (1)

€19.99

Article number: 300032565 Product: 1/48 WWII IJN Komatsu G40 Bulldozer(1) During WWII, Japanese forces developed the Komatsu G40 Bulldozer to aid in airfield construction. This was the first bulldozer manufactured by the Japanese. One hundred and forty-eight G40 bulldozers were built throughout the war. The G40 was sent to the northern and southern fronts, but due to the war few managed to reach their assigned airfields. Only one G40 survived the war, and can be seen at the Komatsu Techo Center in Shizuka, Japan. The Japan Society of Mechanical Engineers recognized the vehicle in 2007 as a Mechanical Engineering Heritage item.

More
1:48 Jap. Mitsu. J2M3 Interceptor Raiden

1:48 scale

1:48 Jap. Mitsu. J2M3 Interceptor Raiden

€14.99

Article number: 300061018 Product: 1:48 Jap. Mitsu. J2M3 Interceptor Raiden The J2M Raiden (Allied reporting name "Jack") was developed by the Japanese Navy in WWII as a land-based interceptor. It began to reach units from September 1944 and they were used to intercept B-29 bombers which were attacking Japan. This kit accurately depicts the J2M3 variant and allows modellers to assemble either deployed or retracted landing gear. Parts for a drop tank and two pilot figures, as well as three marking options, including a 302nd Kokutai aircraft, are included. Raiden (Jack)

More
1:48 Lockheed Martin F-16C Block 25/32

1:48 scale

1:48 Lockheed Martin F-16C Block 25/32

€65.99

Article number: 300061101 Product: 1:48 Lockheed Martin F-16C Block 25/32 About the F-16C Block 25/32 The F-16 has become one of the most widely-used jet fighters in the world, and has therefore undergone a series of upgrades throughout its service life with various air forces. The Block 25entered service in 1984 and featured upgraded radar and cockpit avionics. The Block 32 was the first upgrade affected by a program to use different engines in the F-16, and continued to use Pratt & Whitney engines, while the Block 30 used engines made by General Electric. The Block 32 has been upgraded to carry a wide range of weapons, including the LITENING II laser targeting pod, which enables precision attack capability with laser-guided bombs. About the Model Model represents the F-16C [Block 25/32]. New parts accurately reproduce the correct engine nozzle and smaller air intake that correspond to Pratt & Whitney powered F-16s. Main landing gear and gear well covers also depicted with new parts. Wing reinforcement plates for Block 32 recreated with phot etch parts (sold seperatley). Extensive weapons set features AIM-9L/M and AIM-9X sidewinders, AIM-120 AMRAAM, wing and centerline fuel tanks, and LITENING II targeting pod. New parts for GBU-12 laser-guided bombs feature clear parts to depict the laser guidance package for a more realistic finish. New ordinance racks on the wings accurately match their respective weapons. 1 pilot figure included and 3 sets of U.S. Air National Guard markings included. Add ITEM 12621 F-16 Fighting Falcon Detail Up Parts Set for the ultimate finish. 1/48 F-16C ÄBlock 25/32Ü

More
1:48 RAF De Havilland Mosquito Mk.6

1:48 scale

1:48 RAF De Havilland Mosquito Mk.6

€27.99

Article number: 300061062 Product: 1:48 RAF De Havilland Mosquito Mk.6 Nicknamed "The Wooden Wonder" due to its nearly all-wood construction, the de Havilland Mosquito was initially conceived as a fast, unarmed bomber and went on to serve in that and many other roles during WWII. This kit depicts the NF Mk.II nightfighter and FB Mk.VI fighter-bomber variants which were introduced in Spring 1942 and Spring 1943 respectively. Parts are included for the NF Mk.II's nose- and wing-mounted radar antenna as well as 500lb bombs and rockets for the FB Mk.VI. The bomb bay may be fitted with bombs and also features details for the fuel tank and 20mm cannon magazines. Two pilot figures and three marking options are included.

More
1:48 Sd.Kfz. 251/1 Ausf.D Halftrack (2)

1:48 scale

1:48 Sd.Kfz. 251/1 Ausf.D Halftrack (2)

€27.99

Article number: 300032564 Product: 1/48 Sd.Kfz.251/1 Ausf.D Halbkette (2) Of the many variables that take affect any conflict, supply and mobility are the most pressing.Germany realized this very early and developed a number of vehicles for this purpose,including the Sd.Kfz 251 half-track. This machine became the centerpiece of their mechanized corps throughout WWII. The half-track could drive on difficult terrain and could easily tow various kinds of trailers and cannons. The Ausf.D was designed for ease of production and various types were produced, including those equipped with wireless radios and gun turrets. However, the basic version was the troop carrier which seated 12and came armed with two MG42 machine guns. The half-track could be seen at every front and had an on-road top speed of 53km/h and a 300km operational range. Length: 126mm, Width: 48mm. As there were many variations of the Ausf.D, this 1/48 assembly kit model of the GermanMtl.SPW. Sd.kfz 251/1 Ausf.D Schutzenpanzerwagen depicts a personnel carrier. Parts such as the interior and undercarriage have been accurately reproduced with less parts for easy assembly. The included assembly type tracks have a realistic sag effect. A commander figure wearing a winter uniform and a soldier figure carrying a MG42 machinegun on his shoulders are included. (Total 2) Accessories such as the Panzerschreck, grenade cases, infantry equipment and so onare also included in this set. Three kinds of decals depicting Normandy and the Eastern front units are included.

More
1:48 US Med.Tank M4 Sherman earl.

1:48 scale

1:48 US Med.Tank M4 Sherman earl.

€28.99

Article number: 300032505 Product: 1:48 US Med.Tank M4 Sherman earl. Following the popular release of the Tiger I comes our second amazing tank to the MMV Series, the U.S. M4 Sherman. Like the Tiger I, the Sherman features easy assembly with as much detail as our fantastic 1/35 MM Series plus more. About the M4 Sherman Early Production With approximately 50,000 units produced during WWII, the U.S. Armys series of M4 Sherman tanks were one of the driving forces behind Allied victory. Designed for efficient massproduction and including room for future modifications, the M4 series boasted superior ground performance with excellent reliability. Amongst the many variants produced, the early production M4 featured a 60 angular shaped welded hull and a cast turret loaded with a 75mm M3 cannon. With a 350hp air-cooled gasoline engine, Vertical Volute Spring (VVS) suspension and a 5-speed forward and reverse transmission, the M4 was capable of top speeds of up to 38.6km/h. Production began in July 1942, with 6,748 units produced by January 1944. The initial production run featured a distinctive 3-piece bolted transmission housing. Some M4 were also fitted with applique armor bolted later on for extra defense. The M4 Sherman saw action throughout Europe including both the Normandy and Italian campaigns and was the most produced U.S. tank during WWII. About the Model Model features exceptional detailing of all unique aspects of the early production M4 Sherman. Note the 3-piece bolted together front transmission housing, the sharply angled upper hull, and the smooth curve of the cast turret. Like the Tiger I tank, model also features a die-cast hull for extra weight. 1/48 detailed scale model of the early production M4 Sherman. Length: 120mm, Width: 57mm Early production model accurately depicted with 3-piece bolted transmission housing, flat return roller arm and spoked wheels. Pre

More
1:48 US Modern 4x4 Utili.Veh.4x4 w/Gren.

1:48 scale

1:48 US Modern 4x4 Utili.Veh.4x4 w/Gren.

€32.99

Article number: 300032567 Product: 1/48 US Modern 4x4 Utili.Veh.4x4 w/Grenade Launcher Powerful Guard In the 1980s, U.S. military developed new general-purpose vehicles which were intended to be used for a wide variety of military duties. Depending on the body type and fitted equipment, it could perform a wide range of roles. Of those different variants, the armament carrier type was one of the most numerous. Fitted with powerful armament such as an Mk.19 grenade launcher and M60 machine gun on a ring mount, they are used to guard units and important facilities in difficult conditions including the 1991 Gulf War, being vital for U.S. military activities. About the Model This is a 1/48 scale plastic assembly kit model of the U.S. Modern 4x4 Utility Vehicle w/Grenade Launcher. Length: 100mm. ★The dynamic form of the vehicle fitted with an Mk.19 grenade launcher on a ring mount has been realistically reproduced. ★You can also assemble the model with an M60 machine gun. ★Parts for winch and smoke grenade launchers are also included allowing a variety of diorama possibilities. ★Detailed suspension and realistic rubber tires. ★Driver and gunner figures as well as 4 kinds of markings to depict a vehicle seen during the Gulf War included.

More
1:48 US P-38 F:G Lightning

1:48 scale

1:48 US P-38 F:G Lightning

€65.99

Article number: 300061120 Product: 1:48 US P-38 F:G Lightning Lighting Strikes! The P-38 Lightning was developed by Lockheed in response to a 1937 proposal from the United States Army Air Corps. Its twin V12 engines were housed one each in twin booms that stretched back to the tailplane, flanking a central nacelle containing the cockpit and weaponry. A combination of superb range, firepower and carrying capacity ensured that the P-38 was a superior fighter-bomber, and it made a considerable impact after joining fighting in Europe in 1942. It was also active in the Pacific War from late that year, its escapades including the shooting down of Japanese Admiral Isoroku Yamamoto in 1943 that provided a significant morale boost for the Allied cause. About the Model ★This is a 1/48 scale plastic model assembly kit. Length: 240mm, width: 330mm. ★Exhaustive studies of actual P-38 aircraft enabled this precise recreation of the distinctive twin boom aircraft form, with particular highlights being early model slimline engine cowlings, wing shape and rounded canopy design. ★Integrated landing gear bay and wing spar parts ensure sturdy assembly and accurate recreation of angle. ★Choose between P-38F and P-38G canopy designs, with each able to be assembled open or closed. ★The detailed cockpit features recreations of the control wheel, bulletproof glass plate, rear-mounted radio equipment and more. ★One-piece tailplane horizontal stabilizer slides on and is secured by rudder components. ★Metallic finish decals are used on main and nose landing gear strut cylinders. ★The nose has depictions of four 12.7mm machine guns and the 20mm cannon. ★Weights are included to ensure correct balance of the model when on display. ★Comes with a seated pilot figure, two marking options and an informative background information leaflet in four languages.

More
1:48 US P-38H Lightning (WhiBox)

1:48 scale

1:48 US P-38H Lightning (WhiBox)

€65.99

Article number: 300025199 Product 11:48 US P-38H Lightning (WhiBox) About the Model • This is a 1/48 scale plastic model assembly kit. Fuselage length: 240mm, wingspan: 330mm. • The unique form of the P-38 is captured in style, with this kit allowing assembly of the P-38H variant. This kit creates a parked aircraft. • New parts are included to depict P-38H-specific features such as larger supercharger intakes, rear canopy without reinforcing frames, instrumentation, nose landing gear strut and bay covers, main landing gear reinforcements, upgraded 20mm cannon and 12.7mm machine guns that were often modified on the ground, plus turbocharger coolant pipe. • Choose whether to attach optional main landing gear air duct. • Weights are included in the kit to ensure correct balance of the model when displayed. • A detailed cockpit features the wheel-type controls, radio, throttle box and more. • 1 marking option is included, depicting an aircraft with lively nose art and belonging to the 432nd Fighter Squadron, part of the 475th Fighter Group that was devastatingly effective from 1943-44 over the Pacific. • This product will be sold in a plain white box with a color label on the lid. • Comes with canopy masking stickers and a full-color painting guide.

More
1:48 US Rep. P-47D Thunderbolt Bubblet

1:48 scale

1:48 US Rep. P-47D Thunderbolt Bubblet

€43.99

Article number:300061090 Product: 1:48 US Rep. P-47D Thunderbolt Bubblet About the Republic P-47D Thunderbolt "Bubbletop" In May 1941, as the war raged in Europe, a single-engine fighter of more than 4t made its first flight. This fighter was the XP-47B, prototype of the Republic P-47 Thunderbolt of which a total of 15683 units will be built. Thanks to war experience, this aircraft was equipped with a 2000hp radial R-2800 engine, a supercharger and eight 12,7mm machine-guns. The XP-47B was to reach 633km/h and in January 1942, just after the USA went to war, the production of P-47B began. It was followed by the P-47C that incorporated various improvements and, from April 1943, by the P-47D, the most built version. The P-47D was equipped with an R-2800-59 engine, which can develop up to 2300hp with combat emergency water injection system engaged. The ducts that were passing on the sides and below the cockpit to connect the supercharger placed behind the pilot's seat gave to this plane its massive aspect. Many sub-types of the P-47D, designated D-1 to D-40, were produced but the first versions were called "Razorback" because of their sharp edge dorsal fin. The D-25 sub-type, which was introduced around June 1944, was fitted with an electrically actuated bubble canopy in order to improve pilot visibility and increased capacity fuel tanks. This decision resulted in a completely remodeled plane shape. All subsequent sub-types were also fitted with the bubble canopy and became a characteristic feature of late production Thunderbolts. The P-47 "Bubbletop" proved to be an excellent, well-balanced fighter-bomber. About the model - Republic P-47D Thunderbolt "Bubbletop" plastic assembly kit. - 1/48 scale, Overall length: 230mm, Overall width: 259mm. - This is the representation of P-47D late production that was nicknamed "Bubbletop". - The massive form of the plane, especially its belly and its cowling, has been accuratel

More
1:48 USN Douglas A1-H Skyraider

1:48 scale

1:48 USN Douglas A1-H Skyraider

€36.99

Article number: 300061058 Product: 1:48 USN Douglas A1-H Skyraider About Douglas A-1H Skyraider U.S. Navy During 1943 the U.S. Bureau of Aeronautics considered to combine the tasks of torpedo bomber and dive-bomber into one. Several aircraft manufacturers, such as Douglas and Martin, were requested to develop a large, single-seat attack aircraft. According to the requirement, Douglas Skyraider, was developed by Douglas Aircraft Company, Inc. The development was started in early July 1944, and all night efforts of engineers made the first prototype's first flight possible already on March 18, 1945. Despite the short period of the development, flight trials proved the airframe's flight characteristics satisfactory and the aircraft was rated very highly. In May 1945 a letter of intent for 598 production was signed. The name "Skyraider" was officially approved for the aircraft in February of the following year, and the distribution to units was started at the end of the same year. The Skyraider was powered by Wright R3350 radial engine yielding 2,800 horse power and equipped with three large dive brakes on the fuselage. The Skyraider had a number of types, from the AD-1 to AD-7, recording grand total number of production of more than 3,000. Among them, AD-6 was the most produced variant. The AD designation for the Skyraider was changed in 1962, and the AD-6 became the A-1H. Noted for its durability and a large capacity for external stores, the Skyraider was well liked by its pilots and crewmen.

More
1:48 Volkswagen Type 82E Staff Car

1:48 scale

1:48 Volkswagen Type 82E Staff Car

€16.99

More
1:48 WWII Diorama-Set Brick Wall&Sandbag

1:48 scale

1:48 WWII Diorama-Set Brick Wall&Sandbag

€12.99

Article number: 300032508 Product: 1/48 WWII Diorama-Set Brick Wall&Sandbag This kit assists modelers in recreating fortified positions and urban battlefields. Set includes easy-to-use bricks, bars and sandbags. 1/48 scale precision crafted items, may be used to add detail and atmosphere to military dioramas. Set includes anti-tank barricades made from train rails, as well as wooden pegs and pyramid shaped barricades Jerry can set (32510) available separately. Applicable to a variety of historical periods and modeling situations.

More
1:48 WWII Douglas A-1J Skyrider USAF

1:48 scale

1:48 WWII Douglas A-1J Skyrider USAF

€37.99

Article number: 300061073 Product: 1:48 WWII Douglas A-1J Skyrider USAF About the Douglas A-1J Skyraider U.S. Air Force Also going by the names Dauntless II, AD, A-1 Able Dog, and Spad, the Douglas Skyraider saw almost 30 years of service. The Skyraider's development started in June 1944. Not completed in time for WWII, its first combat came with the outbreak of the Korean War in June 1950. The first production version to roll out of the Douglas factory was designated the AD-1. Twelve years and seven versions later, over 3200 Skyraiders had been produced. Among those, the AD-6 version, also known as "Able Dog Six", was produced in the greatest numbers. The next and final version of the Skyraider, the AD-7, was extremely identical to the AD-6, but it had reinforced wing spars and wing fittings, as well as the strongest landing gear of all the variants. The AD-7 housed the new wright R-3350-26WB engine, which enabled a top speed of 285 knots. Due to a directive to standardize the designation of Navy and Air Force aircraft, AD-6 and AD-7 became known as A-1H and A-1J respectively. In 1965, when U.S. air operations in Vietnam became more aggressive, literally hundreds of Skyraiders, including the A-1J, were deployed to the 14th and 56th Special Operations Wings (SOW). Armed with Mk.82 and Mk.117 bombs, 20mm wing-mounted cannons, and rocket launchers, the Skyraiders were used in a wide variety of combat missions.

More
1:48 WWII Figure-Set Ger.Inf.Maneuv.(15)

1:48 scale

1:48 WWII Figure-Set Ger.Inf.Maneuv.(15)

€10.99

Article number: 300032530 Product: 1/48 WWII Figure-Set Ger.Inf.Maneuv.(15) Our latest 1/48 scale figure set features WWII German soldiers in relaxed poses, standing, walking, wearing field caps and with weapons shouldered. Also includes figures depicting tank crew at rest. 2 all-new officer figures and military policeman, which are available now for the first time in any scale, are also included. This set is perfect for modeling non-combat scenes and dioramas of life behind-the-lines. Set includes 7 machine gun crew on maneuvers, 2 standing infantry, 3 tank crew, 2 officers and 1 military policeman for a total of 15 figures. Infantry figures feature realistic M43 field uniforms. Includes separately molded weapons and equipment such as machine gun tripod mount.

More
1:48 WWII Figure-Set Ger.Infantary (15)

1:48 scale

1:48 WWII Figure-Set Ger.Infantary (15)

€14.99

Article number: 300032512 Product: 1:48 WWII Figure-Set Ger.Infantary (15) Tamiya introduces a set of 15 high quality plastic assembly 1/48 scale figures. Models depict 10 early WWII style German infantry in charging and firing poses as well as 5 tank crewmen that make perfect accessories for AFV models. Set includes separate plastic weapons and equipment for added realism. About the Model 1 set includes: Noncommissioned Officer x 3 Rifleman x 2 Machine gunner x 3 Loader x 2 Tank crewman x 5 Separate sprue for weapons and equipment. WWII German Infantry Set

More
New
1:48 WWII Ger. Sturmgeschütz III Ausf.B

1:48 scale

1:48 WWII Ger. Sturmgeschütz III Ausf.B

€24.99

Sturmgeschutz III Ausf. B

More
1:48 WWII Ger.Floatpla.Arado Ar.196A I/T

1:48 scale

1:48 WWII Ger.Floatpla.Arado Ar.196A I/T

€67.99

More
1:48 WWII Ger.Sd.Kfz.181 Tiger I Ausf.E

1:48 scale

1:48 WWII Ger.Sd.Kfz.181 Tiger I Ausf.E

€32.99

Article number: 300032504 Product: 1/48 WWII Ger.Sd.Kfz.181 Tiger I Ausf.E Answering the requests from AFV fans all around the world, Tamiya is proud to introduce our first amazing tank to the 1/48 scale Military Miniature Series. And what tank could be more appropriate than the awesome Tiger I?! In a size that sits comfortably in the palm of your hand, this is a must have for all diorama fanatics and AFV collectors. For our first tank release there was no looking past the Tiger I. One of the most sophisticated and best engineered WWII tanks, the Tiger I saw action across all fronts and remains one of the most popular builds amongst AFV modelers. Lining this beautifully detailed model with other 1/48 scale WWII vehicles or aircraft and you will feel the true size and refined power of this amazing war machine. About the Tiger I Towards the middle of WWII, the Wehrmacht was hard pressed on two fronts, facing tough fighting against the superior Soviet T34 and KV-I tanks in the East, and retreating in the face of the Allied offensive in North Africa. But in late 1942, German units were assigned a powerful new war machine that far surpassed the Panzer III and Panzer IV tanks: the Tiger I. Equipped with the awesome 88mm main gun, 100mm thick armor at the front, 80mm armor on the sides, and a 650hp Maybach engine, the Tiger I is widely considered to be the most powerful and sophisticated tank of its time. Henschel produced over 1,300 Tiger I heavy tanks during the period of the war, ranging from initial production to modified late production models. The approximately 200 models produced from November 1942 to June 1943 are characterized as early production models. Distinctive features of early production Tiger I tanks include the large cylinder shaped cupola with a smoke discharger and pistol ports on the turret. The Tiger I first saw action against the Soviets near Leningrad, and went on to serve with distinction on the East

More
1:48 WWII Ger.Tank Destr. Jagdpanther L.

1:48 scale

1:48 WWII Ger.Tank Destr. Jagdpanther L.

€27.99

1/48 Jagdpanther Late Version

More
1:48 WWII German Motorcycle&Sidecar (2)

1:48 scale

1:48 WWII German Motorcycle&Sidecar (2)

€12.99

Article number: 300032578 Product: 1/48 WWII German Motorcycle&Sidecar (2) Add some more detail to your 1/48 scale dioramas with this scale model of a German motorcycle and side car. Side cars were paired with motorcycles by German forces in many areas of the WWII conflict, and their excellent off-road ability combined with the bike’s engine power made them a useful asset in transporting soldiers and equipment, some even being mounted with machine guns.

More
1/48 Churchill MkVII Crocodile

1:48 scale

1/48 Churchill MkVII Crocodile

€28.99

Article number: 300032594 Product: 1:48 Brit.Pz. Churchill Mk.VII Crocodile This is a 1/48 scale plastic assembly kit model of the British Tank Churchill Mk.VII Crocodile. The Churchill design was the result of a chastening experience for British forces in early WWII, a more modern design that could be produced quickly to make up for armor shortfalls after the Dunkirk evacuations. The Mk.VII variant was up-gunned with a 75mm gun and had improved armor up to 152mm thick! The Crocodile is one of the most notable "special" variants of the Churchill. It had an 80-plus meter range flamethrower in place of the front machine gun, towing its fuel and compressed nitrogen propellant in a trailer behind.

More
1/48 Heavy Tractor SS-100

1:48 scale

1/48 Heavy Tractor SS-100

€22.99

Article number: 300032593 Product: 1/48 Heavy Tractor SS-100 This scale model recreates the SS-100, which was a veritable workhorse for German forces during WWII. Powered by a 100hp 8,553cc diesel, it was based upon a civilian vehicle design and could pull loads of up to 20 tons. The SS-100 was put to work towing all sorts of subjects including artillery pieces, aircraft, and even V2 rockets, as well as recovering broken down vehicles.

More
1:48 Brit. Small Staff Car 10HP

1:48 scale

1:48 Brit. Small Staff Car 10HP

€17.99

Article number: 30003262 Product: 1/48 WWII Brit. Small Staff Car 10HP Tilly was the name given to British Small Staff Cars coming from the word "Utility". These Tilly vehicles were produced in large numbers for British and Allied forces during WWII from civilian car designs. They were severely underpowered, but served with distinction and stayed in production throughout WWII and could be seen on every front. This British Staff Car was powered by a four cylinder 22-kW engine derived from a 10 HP commercial saloon.

More
1:48 F-16CJ Fighting Falcon Lockheed Mar

1:48 scale

1:48 F-16CJ Fighting Falcon Lockheed Mar

€56.99

Article number: 300061098 Product: 1/48 Lockheed Mar.F-16CJ Fighting Falcon About the F-16CJ The F-16 is one of the world's top lightweight multi-role fighter aircraft. Since first deployment to U.S. Air Force (USAF) units in the late 1970's, total production numbers have exceeded 4,000, making it the second most highly produced jet fighter plane following the F-4 Phantom. The latest F-16 variant deployed to USAF units, the F-16C Block 50, is capable of precision night and all-weather bombing, and features advanced digital electronics for radar and cockpit displays. The slight variant, the F-16CJ (Block 50), is fitted with HARM Targeting System (HTS) and is used specifically for SEAD (Suppression of Enemy Air Defenses) missions. The F-16CJ (Block 50) has flown SEAD missions over Iraq while monitoring the northern and southern no-fly zones and during Operation Iraqi Freedom. About the Model - Model represents the F-16CJ (Block 50) as used for USAF SEAD missions. - Sleek fuselage including aerodynamic blended wing body design accurately reproduced. - Accurately curved bubble top canopy can be assembled in the opened or closed position. - Horizontal stabilizers are movable and flaperons can be modeled in both the up or down positions. - A range of weapons and accessories are included such as HARM, AMRAAM, and Sidewinder missiles (M & X variants), detachable external fuel tanks, ECM pod, and HTS pod. - One pilot figure included and can be depicted with either standard or JHMCS flight helmet. - Detailed markings for 3 aircraft, including the 5th Air Force commander's aircraft stationed at Misawa airbase in 2005, are included.

More
1:48 Fairchild Republic A-10A Thunder.II

1:48 scale

1:48 Fairchild Republic A-10A Thunder.II

€33.99

Article number: 300061028 Product: 1:48 Fairchild Republic A-10A Thunder.II About the Fairchild Republic A-10A "Thunderbolt II" The need for close air support, on small pin point targets, was recognized early during the Vietnam conflict. Following an experimental development program begun in the early 1970's, the Fairchild Republic Industries A-10 Thunderbolt II was selected for production. The performance characteristics demanded were for operation on unimproved short fields, both high and low airspeed maneuverability, easy maintenance, long loiter times and range, excellent pilot protection, and a capacity for large mixed weapons loads. The appearance of the A-10 is remarkable while its performance is amazing. Known affectionately as the "Wart Hog" by its pilots, it's a large single seat aircraft, identified by a pair of TF-34-100A high bypass fan jet engines mounted high near the rear of the twin tailed fuselage. A few of the specifications are: Length 53' 4"; height 14'8", span 57'6"; maximum gross weight 47,400lbs, including 16,000lbs of external stores. Internal armament is the GAU-8/A 30mm Gatling cannon capable of 2100 or 4200 rounds per minute. It carries 1350 rounds of ammunition, a fire control head-up display, CRT TV monitor, laser spot seeker plus a diversified armament panel that can facilitate any operational need. The A-10 has been around since 1972, and has again proven its worth during the recent Gulf war.

More
60 of 93 Items