Ce site utilise des cookies. En poursuivant la navigation sur ce site, vous acceptez l’utilisation de cookies.
OK
Tamiya CarsonMajoretteDickie ToysSchuco 

CR-01 Alum. Wheel Hub Clamp Type 6mm (4)

Article number: 300053569 Product: CR-01 Alum. Wheel Hub Clamp Type 6mm (4) These machined aluminum hubs clamp to the wheel axle rather than the slip-on stock plastic units resulting in truer spinning wheel and added strength. Set includes four hubs and hardware.
€33.99
TVA incluse, plus Frais d'expédition

CR-01 Bent Lower Arm Front

Article number: 300054106 Product: CR-01 Bent Lower Arm Front These aluminum lower arms are bent upwards to aid with clearing obstacles and will also adda visual highlight to your chassis Bent Lower Arm (New design) x 2 Screws Can be used with all CR-01 chassis vehicles. CR-01 Bent Lower Arm Front
€50.99
TVA incluse, plus Frais d'expédition

CR-01 Crawler Motor CR-Tuned 35T

Article number: 300054114 Product: CR-01 Crawler Motor CR-Tuned 35T When rock crawling, it is very important to have a motor that provides the appropriate amount of torque required, to give you more control over the vehicle. Tamiya is releasing the CR-Tuned Motor (35T) to meet the needs of all Rock Crawlers. About the Model CR-Tuned Motor (35T) x 1 Can be used with every CR-01 chassis vehicle. Can also be used with big tire trucks, touring cars, and M-chassis vehicles (Great for beginners) CR-Tuned Motor 35T
€53.99
TVA incluse, plus Frais d'expédition

CR01 Bevel-Gear-Set (1)

CR-01 Bevel Gear Set
€24.99
TVA incluse, plus Frais d'expédition

CR01 Body-Kit Toyota Land Cruiser FJ40

Land Cruiser 40 Body
€54.99
TVA incluse, plus Frais d'expédition

CR01 F-Parts Bumper/Body Support

CR-01 F Parts (Bumper)
€11.99
TVA incluse, plus Frais d'expédition

CR01 Propeller Shaft Plastic (1)

CR-01 Propeller Shaft
€10.79
TVA incluse, plus Frais d'expédition

CR01 Rein.D Shaft+Diff Lock

Article number: 300054108 Product: CR01 Rein.D Shaft+Diff Lock This highly durable Reinforced Drive Shaft & Diff Lock set securely locks in place to enable improved performance, allowing efficient power transmission. Reinforced Drive Shaft Long 1pc. Reinforced Drive Shaft Short 1pc. Reinforced Diff Lock Housing A 1pc. Reinforced Diff Lock Housing B 1pc. *Can be used with every CR-01 Chassis. CR01 Rein.D Shaft+Diff Lock
€43.99
TVA incluse, plus Frais d'expédition

CR01 Reinforced Wheel Axle

Article number: 300054048 Product: CR01 Reinforced Wheel Axle Durable wheel axles replace set- supplied axles. They are less vulnerable to wear and increase reliability. CR-01 Rein. Wheel Axle*2
€10.49
TVA incluse, plus Frais d'expédition

Cross-Spike Tires rea. (2) Stad.Blitzer

Stadium Blitzer R. Tires
€19.49
TVA incluse, plus Frais d'expédition

Cup Joint Universal Shaft

Article number: 300053790 Product: Cup Joint Universal Shaft Use with DF-02 Assembly Universal Shaft (item 53791) or Assembly Universal Shaft (TT-01, TA04) (item 53792). •Compatible chassis: TT-01, DF-02 Cup Joint for Univ. Shaft
€19.99
TVA incluse, plus Frais d'expédition

CVA Mini Shock Unit Cylinder (4)

Article number: 300053619 Product: CVA Mini Shock Unit Cylinder (4) ★These components can be used in place of kit-standard friction dampers, giving more efficient shock absorption and the ability to fine-tune setup using different (separately sold) viscosities of oil. Compatible Chassis TT-01 Type-E, TT-01 Type-ES & TT-01D Type-E Chassis   Warning! Not suitable for children under 14 years.
€39.99
TVA incluse, plus Frais d'expédition

D-Parts (1) 47201 TLT-1

D-Parts (1) für 47201
€7.89
TVA incluse, plus Frais d'expédition

D-Parts 58397

D-Parts for 58397   Warning! Not suitable for children under 14 years.
€19.49
TVA incluse, plus Frais d'expédition

D-Parts D1-D25 Fitting Par.M4 Sher.56014

D Parts for 56013
€16.49
TVA incluse, plus Frais d'expédition

D-Parts for 58063

D Parts for 58063   Warning! Not suitable for children under 14 years.
€16.49
TVA incluse, plus Frais d'expédition

D-Parts Super Fighter G DT-02 58340

D Parts (1 pc.) for 58340
€7.99
TVA incluse, plus Frais d'expédition

Damper O-Ring 3x6mm Rot (10)

Damper O-Ring(Red) *10
€3.19
TVA incluse, plus Frais d'expédition

Damper Parts Bag for 58340

Damper Parts Bag for 58340   Warning! Not suitable for children under 14 years.
€7.49
TVA incluse, plus Frais d'expédition

Damper Set Alum. M-Chassis 4X

Article number: 300054000 Product: Damper Set Alum. M-Chassis 4X Up to now, M-Chassis owners have had to make do with touring car aluminum dampers when up grading their cars. Tamiya has now developed this new set of 4 dampers specifically for the M-Chassis, featuring damper cylinders and damper rods that are 2mm shorter. As a result, the chassis' ride height is lowered and damper stroke can be more accurately customized. A hard black coating reduces friction and serves as a nice contrast to the blue damper caps and included white damper springs. *Compatible Chassis: M-03, M-04, M-05 and M-06 M Chassis Alu.Damper-Set 4 pcs.
€98.99
TVA incluse, plus Frais d'expédition

Dancing Rider Chrome Body

Article number: 300054856 Product: Dancing Rider Chrome Body This is a chrome plated spare body set of the Dancing Rider. For the modeler’s convenience, the body comes pre-cut. • Chrome plated finish polycarbonate body. The body is pre-cut, and features holes already drilled for mounting on the T3-01 chassis. • Stickers are included to decorate the body. • Compatible with T3-01 chassis models.   Warning! Not suitable for children under 14 years.
€31.49
TVA incluse, plus Frais d'expédition

DB-01 3mm Thin Alum.Lock Nut (5)Bl.an.

Article number: 300054155 Product: DB-01 3mm Thin Alum.Lock Nut (5)Bl.an. These Thin Aluminum Lock Nuts offer your machine extra weight savings and also look great. •3mm Thin Aluminum Lock Nut X 5pcs. •For general purpose use. 3mm Thin Alu.Lock Nut
€9.29
TVA incluse, plus Frais d'expédition

DB-01 5mm Heavy Duty Adjuster (8) L=25mm

5mm Reinforced Adjuster*8
€5.99
TVA incluse, plus Frais d'expédition

DB-01 5x5mm Al.Ball Connector(5)Bl.anod.

Article number: 300053906 Product: DB-01 5x5mm Al.Ball Connector(5)Bl.anod. Use to adjust position of upper arm on competition-ready R/C chassis. Length from bearing surface to ball connector has been reduced from 5mm to 4mm, to increase setting range. Made from high durability aluminum. *Compatible chassis: TA05, TRF415MSX, TB Evolution IV 5x5mm Alu. Hex Ball Connecto
€16.99
TVA incluse, plus Frais d'expédition

DB-01 5x8mm Al.Ball Connector(5)Bl.anod.

Article number: 300053907 Product: DB-01 5x8mm Al.Ball Connector(5)Bl.anod. Use to adjust position of upper arm on competition-ready R/C chassis. Length from bearing surface to ball connector has been reduced from 5mm to 4mm, to increase setting range. Made from high durability aluminum. *Compatible chassis: TA05, TRF415MSX, TB Evolution IV 5x8mm Alu. Hex Ball Connecto
€16.99
TVA incluse, plus Frais d'expédition

DB-01 5x8mm Ball Head Connector (5)Steel

Article number: 30003969 Product: DB-01 5x8mm Ball Head Connector (5)Steel These general use connectors are made from tough high-strength steel to handle the rigors of off-road racing but can also be installed in on-road chassis. Compatible Chassis: Any 5x8mm H.H.H.B.Connector*5
€13.99
TVA incluse, plus Frais d'expédition

DB-01 Dust Cover Ball Head&Adjuster(20)

Article number: 300053980 Product: DB-01 Dust Cover Ball Head&Adjuster(20) This general use Option Part protects the connection joints between ball connectors and plastic adjusters in the suspension system to ensure long-lasting, smooth suspension operation. Compatible Chassis: Any Dust Cover for Adjuste
€5.19
TVA incluse, plus Frais d'expédition

DB-01/TRF416 18 T Center Pully (2)

Article number: 300053989 Product: DB-01/TRF416 18 T Center Pully (2) Install these new Option Parts to enhance the TRF501X drivetrain. The 37T Ball Diff. Pulley is made from slide molding and features integrated pulley flange to eliminate the risk of flange detachment. Flange design also includes a dirt discharge port to ensure smooth operation in off-road conditions. The 18T Center Pulley increases torque and can handle the output from the latest powerful motors. These pulleys are also designed to reduce belt jumping for consistent operation. *Compatible Chassis: TRF501X Center Pulley (18T)
€7.79
TVA incluse, plus Frais d'expédition

DB-01/TRF501X Pinion Gear 13/14/15T 48DP

Article number: 300054062 Product: DB-01/TRF501X Pinion Gear 13/14/15T 48DP With the previous 48 Pitch Pinion gears it was possible to change your gear ratio to match the course layout and get the best out of your car, but it was only available in 16T, 17T, 18T, 19T, 20T, and 21T gears. But now this new Option Part includes the 13T, 14T, and 15T gears. It is possible to use this item with TRF501X and DB-01 chassis. Item Contents •Pinion Gear (13T, 14T, 15T) x 1 •3x3mm Grub screw x 3 •1.5mm Hex wrench x 1 Pinion 48 Pitch 13T 14T 15T
€20.49
TVA incluse, plus Frais d'expédition

DB-01/TRF501X Pinion Gear 20/21T 48DP

Article number: 300053966 Product: DB-01/TRF501X Pinion Gear 20/21T 48DP ★These pinion gears are for use with 48 pitch spur gears. ★Choose the right one to get your model perfectly setup for the track! ★Gear ratios (with 96T spur gear) = 10.80:1 (20T), 10.29:1 (21T). Compatible Chassis DB01, DB02, DN-01, TRF201, TRF502X & TRF503 Chassis   Warning! Not suitable for children under 14 years.
€16.99
TVA incluse, plus Frais d'expédition

DB-01/TRF501X Pinion Gear 22/23T 48DP

Article number: 300054217 Product: DB-01/TRF501X Pinion Gear 22/23T 48DP These 48 Pitch Pinion Gears feature newly designed teeth to reduce both noise and friction loss. Each pinion gear features two grub screw attachment holes to allow you to choose the best attachment position. 48 Pitch Pinion Gear (22T, 23T) x 1 each
€15.79
TVA incluse, plus Frais d'expédition

DB-01/TRF501X Reinforc.Belt 369x3,7mm(1)

Article number: 300054140 Product: DB-01/TRF501X Reinforc.Belt 369x3,7mm(1) •The clean-type drive belt resists dust and maintains optimum drive efficiency. •The drive belt core makes it approximately 1.5 times stronger than previous drive belts. •While still providing flexibility and low drive resistance for improved performance. •The belt has a very long life and the teeth do not slip as it has been reinforced. •369 belt size, Width: 3.7mm. •Can be used with any DB01 chassis and TRF501X WE and TRF511 machines. •DB01 Reinforced Drive Belt x 1pc. DB01 Reinforced Drive Belt
€11.29
TVA incluse, plus Frais d'expédition

DB-01/TRF501X Spur Gear 91 Teeth 48Pitch

48 Pitch Spur Gear (91T)
€6.69
TVA incluse, plus Frais d'expédition

DB01/TRF511 Gear Differential Unit 37 T

Article number: 300054329 Product: DB01/TRF511 Gear Differential Unit 37 T This gear differential unit can be used to replace the kit-standard ball differential found in the DB-01 chassis and 511,502 chassis (items 58395 Durga and 58404 Baldre). It gives drivers another setting option to fine tune their off-road buggy to track conditions. The sealed gear unit differential can be fine tuned using different viscosity weight oils to control how fast or how slow you want the differential to behave. The higher viscosity the oil is the slower the differential is in movement. Compared to a standard ball differential, gear differentials require less maintenance cycles. The unit uses a 37T pulley as well as 12T and 20T bevel gears. In addition, Item 54311 TA06 Cross Shaft for Gear Differential Unit comes standard for greater durability. The Cup Joints included with this item are simultaneously available as Spare Parts (Item 51472).
€40.99
TVA incluse, plus Frais d'expédition

Decal Bag for 56020

Decal Bag for 56019   Warning! Not suitable for children under 14 years.
€10.89
TVA incluse, plus Frais d'expédition

DF-02 5mm Ball Head M3 (10)

5mm Ball Connector *10
€6.29
TVA incluse, plus Frais d'expédition

DF-02 A-Parts Damper/Gear Cover

DF02 A Parts (Gear Case)
€14.49
TVA incluse, plus Frais d'expédition

DF-02 B-Parts Upright/Steering Arm

DF02 B Parts (Upright)
€13.49
TVA incluse, plus Frais d'expédition

DF-02 Ball Differential Set (1)

Article number: 300053663 Product: DF-02 Ball Differential Set (1) ★Ball differentials provide a limited slip diff effect, whereby drive is maintained even if one of the driven wheels loses contact with the surface. ★This is an assembly type ball differential, with parts such as gearbox joints included. Compatible Chassis TT-02, TT-02 Type-S*1, TT-02D, TT-01 Type-E, TT-01 Type-ES, TT-01D Type-E, DF-02 & TT-02B*2 Chassis *1: Use with Item 53806 TT-01 Ball Differential Cup Joint for Universal Shaft. *2: When using at the front, insert MB16 (6mm O-ring) into cup joint; when using at the rear, insert MB16 into N1.   Warning! Not suitable for children under 14 years.
€60.99
TVA incluse, plus Frais d'expédition

DF-02 Bathtub Chassis/Frame

DF02 Bathtub Frame
€13.79
TVA incluse, plus Frais d'expédition

DF-02 E-Parts Wheel Axle/Diff. Joints

E Parts for 58328   Warning! Not suitable for children under 14 years.
€9.29
TVA incluse, plus Frais d'expédition

DF-02 King Pin Lightweight (4)

Lightweight King Pins
€8.69
TVA incluse, plus Frais d'expédition

DF-02 Speed Spur Gear 67 Teeth M0.6

Article number: 300053703 Product: DF-02 Speed Spur Gear 67 Teeth M0.6 ★Use this spur gear with kit-standard 19T pinion gear for a 9.17:1 gear ratio, or with separately sold 22T pinion gear for 7.92:1. Compatible Chassis DF-02 Chassis   Warning! Not suitable for children under 14 years.
€4.29
TVA incluse, plus Frais d'expédition

DF-02 Spur Gear 70 T M0.6 (1)

DF02 Spur Gear (70T)
€5.19
TVA incluse, plus Frais d'expédition

DF-02 Universal Shaft Assembly (2)

Article number: 300053791 Product: DF-02 Universal Shaft Assembly (2) Compared to a standard axle/dog bone drive shaft, a universal shaft reduces power loss caused by friction during steering. Compatible chassis: DF-02 DF02 Univ. Shaft
€53.99
TVA incluse, plus Frais d'expédition

DF-02/TT-01 Alum. Motor Heat Sink Bl.an.

Article number: 300053664 Product: DF-02/TT-01 Alum. Motor Heat Sink Bl.an. ★This heat sink is crafted in aluminum, and endowed with 11 cooling fins for efficient dissipation of motor heat. ★Component has a stylish blue anodized finish. Compatible Chassis TT-01 Type-E, TT-01 Type-ES, TT-01D Type-E & DF-02 Chassis   Warning! Not suitable for children under 14 years.
€17.99
TVA incluse, plus Frais d'expédition

DF-03 Alum. Oil Damper Set (4)

Article number: 300053926 Product: DF-03 Alum. Oil Damper Set (4) Optional part for Dark Impact (DF-03). Replace standard dampers with these oil dampers for improved handling. *Compatible chassis: DF-03 DF-03 Aluminum Damper Set
€99.99
TVA incluse, plus Frais d'expédition

DF-03 B-Parts Damper Stay front/rear

DF03 B Parts (Damper Stay)
€11.29
TVA incluse, plus Frais d'expédition

DF-03 Bevel Gear Set (5)

DF03 Bevel Gear Set
€8.39
TVA incluse, plus Frais d'expédition

DF-03 Buggy-Wheels DF-Dish wh/re(2)62/35

Article number: 300053881 Product: DF-03 Buggy-Wheels DF-Dish white/rear (2)62/35 Newly designed off-road wheels for tires featuring larger diameter and width, and new micro pin tread pattern designed for optimum running and control on hard dirt tracks. *Compatible chassis: most Tamiya off-road buggy chassis. Large Dish Wheels Rear 62/35
€11.49
TVA incluse, plus Frais d'expédition

DF-03 Pinion Gear 23/25 T Steel M0.5

05 Pinion Gear (23T,25T)
€16.99
TVA incluse, plus Frais d'expédition

DF-03 Spur Gear Set (4)

DF03 Spur Gear Set
€8.99
TVA incluse, plus Frais d'expédition

DF-03Ra Al.Prop.Cup Joint 1piece front

Article number: 300053948 Product: DF-03Ra Al.Prop.Cup Joint 1piece front Use this one-piece propeller cup joint in place of kit standard parts to improve transmission efficiency. Connection point with propeller shaft features TRF415MSX Y Part (Swing Shaft Protector) to reduce wear and tear. Features stylish blue aluminum finish, can be used to replace front or rear propeller cup joints. *When used on rear, the parts cannot be used with 53931 (DF-03 Center One-Way Set) Compatible chassis: DF-03 DF-03 Alu. OP Prop. Cup Joint
€13.29
TVA incluse, plus Frais d'expédition

DF-03Ra Assembly Universal Shaft (2)

Article number: 300053792 Product: DF-03Ra Assembly Universal Shaft (2) Compared to a standard axle/dog bone drive shaft, a universal shaft reduces power loss caused by friction during steering. •Compatible chassis: TT-01, TT-02 and TA04 •Must use item 54477 when using this part with the TT-02 chassis Univ. Shaft (TT-01, TA04)
€31.99
TVA incluse, plus Frais d'expédition

DF-03Ra Heat Sink Bar (3)

Article number: 300053924 Product: DF-03Ra Heat Sink Bar (3) Option part for Dark Impact (DF-03 chassis). Stylish blue anodized aluminum gearbox plate features 3 heat sink bars to increase heat dissipation effect. Heat sink effect may be adjusted by removing one or more heat sink bars. *Compatible chassis: DF-03 DF-03 Heat Sink Bar Set
€21.99
TVA incluse, plus Frais d'expédition

DF-03Ra Pinion Gear 27/29 T Steel M0.5

05 Pinion Gear (27T,29T)
€16.99
TVA incluse, plus Frais d'expédition

DF-03Ra Slipper Set

Article number: 300053925 Product: DF-03Ra Slipper Set Optional part for Dark Impact (DF-03), slipper clutch is indispensable item for racing buggies. Specially designed slipper clutch protects your R/C cars drive shaft, clutch and engine from the rigors of off-road running and jumping. Includes new 82T spur gear which can be combined with Items 53922 and 53923 R/C 05 Pinion Gears for increased gear ratio setting choices. *Compatible chassis: DF-03 DF-03 Slipper Clutch Set
€57.99
TVA incluse, plus Frais d'expédition

Diff. Shaft A & B for 47201

Diff. Shaft A & B for 47201   Warning! Not suitable for children under 14 years.
€13.59
TVA incluse, plus Frais d'expédition

Double-Sided Tape 20mmx2m

Aticle number: 300054693 Product: Double-Sided Tape 20mmx2m This high quality heat-resistant double-sided tape is often used on R/C models to secure and protect equipment. This version comes in roll form compared to Item 50171, which came in individual strips. It's perfect for frequent users. Double-Sided Tape (20mm x 2m roll) x1
€12.99
TVA incluse, plus Frais d'expédition

Drive Shaft (2) for58087

Drive Shaft (2) for58087   Warning! Not suitable for children under 14 years.
€13.79
TVA incluse, plus Frais d'expédition

Drive shaft for 58067 *2

Drive Shaft (2 pcs.) for 58067   Warning! Not suitable for children under 14 years.
€12.59
TVA incluse, plus Frais d'expédition

Drive Sprocket (2) for 56019

Drive Sprocket (2) for 56019   Warning! Not suitable for children under 14 years.
€33.99
TVA incluse, plus Frais d'expédition

Driver Cab MB Arocs 3363 / 56352

  Warning! Not suitable for children under 14 years.
€42.99
TVA incluse, plus Frais d'expédition

DT-01/02/DF-03 P-Parts Servo Saver

P Parts for 58071   Warning! Not suitable for children under 14 years.
€4.39
TVA incluse, plus Frais d'expédition

DT-02 Alu. Servo Mount

Article number: 300054397 Product: DT-02 Alu. Servo Mount These screw shafts are used in place of 3x22mm screw pins for stronger damper attachment. The shaft also features a low-friction coating to ensure smoother damper movement. •Aluminum Servo Mount x 2 •Compatible with DT-02 chassis.
€16.79
TVA incluse, plus Frais d'expédition

DT-02 Alum. Motor Heat Sink

Article number: 300053831 Product: DT-02 Alum. Motor Heat Sink Special motor heat sink has more and longer fins than ordinary heat sinks increasing effectiveness. Motor cling-hole features slit to allow air entry. Both heat sink and motor plate feature blue anodized aluminum for snazzy finish. Set includes: •heat sink x1 •motor plate x 1 •Compatible chassis: DT-02 DT02 Alu. Motor Heat Sink
€33.99
TVA incluse, plus Frais d'expédition

DT-02 Spring Set (2x4)

Article number: 300053832 Product: DT-02 Spring Set (2x4) Set of 8 front and rear springs to be used with CVA damper to allow suspension adjustments to suit road conditions. Soft type are red, hard type are blue for easy recognition. Set includes: •Front springs (2 each, soft and hard) •Rear springs (2 each, soft and hard) •Compatible Chassis: DT-02 with CVA dampe DT02 Spring Set
€25.49
TVA incluse, plus Frais d'expédition

DT-02 Turnbuckle Suspen. Arm&Tie-Rod Set

Article number: 300053828 Product: DT-02 Turnbuckle Suspen. Arm &Tie-Rod Set ★These turnbuckle shafts are for use in place of DT-02 upper arms and steering tie-rods. ★Use them to fine-tune camber and toe setup without detaching adjusters. ★Contains two each of 3x42mm and 3x38mm shafts, plus one each of 3x65mm and 3x85mm shafts. ★Dedicated wrench, adjusters and ball connectors are also included. Compatible Chassis DT-02 Chassis   Warning! Not suitable for children under 14 years.
€28.49
TVA incluse, plus Frais d'expédition

DT-03 Alum. Battery Bar

Article number: 300054564 Product: DT-03 Alum. Battery Bar • This lightweight and rigid aluminum battery bar can be used to secure your battery firmly without fear of it coming loose. • Anodized in blue finish. • Contains small parts to use for attachment. • Compatible with DT-03 chassis models.
€11.79
TVA incluse, plus Frais d'expédition

DT-03 Alum. Steering Servo Mount

Article number: 300054565 Product: DT-03 Alum. Steering Servo Mount • This lightweight and rigid aluminum mount can be used to secure your steering servo firmly without fear of it coming loose. • Anodized in blue finish. • Contains small parts to use for attachment. • Compatible with DT-03 chassis models.
€22.49
TVA incluse, plus Frais d'expédition

DT-03 Carbon Damper Stay front

Article number: 300054562 Product: DT-03 Carbon Damper Stay front These front and rear sway bars are for use on the Tamiya DT-03 off-road chassis platform. Once installed, they allow you to tune the roll of the car depending on off-road track conditions. • Fitting these stabilizers to the front and rear of your DT-03 chassis will reduce roll and provide a better-balanced driving experience. • The set includes 2 differing stiffness of stabilizer for both the front and rear, allowing you to fine-tune your machine according to the driving conditions. • Compatible with DT-03 chassis cars.
€17.29
TVA incluse, plus Frais d'expédition

DT-03 Carbon Damper Stay Rear

Article number: 300054563 Product: DT-03 Carbon Damper Stay Rear •Made from lightweight and rigid carbon fiber material, this stay will enhance damper performance. •Features a number of attachment holes, allowing greater setup options. •Contains small parts to use for attachment. •Compatible with DT-03 chassis models.   Warning! Not suitable for children under 14 years.
€19.99
TVA incluse, plus Frais d'expédition

DT-03 CVA Damper Set Short/Mini (2+2)

Article number: 300054567 Product: DT-03 CVA Damper Set Short/Mini (2+2) These are oil-filled plastic dampers designed to be used for many of Tamiya’s off-road chassis platforms. Contains 4 dampers to complete one chassis. Contents: CVA Mini Shock Units x2; CVA Short Shock Units x2 Compatible with DT-03, DT-02, TT-02B and DF-02 chassis cars.
€31.99
TVA incluse, plus Frais d'expédition

DT-03 Full Turnbuckle Set (6)

Article number: 300054572 Product: DT-03 Full Turnbuckle Set (6) This set contains 6 turnbuckle shafts to replace the upper arms and tie-rods on the DT-03 buggy chassis, allowing finer adjustment of its set-up. 3x38mm Stainless Steel Adjustable Shaft x2 3x32mm Stainless Steel Adjustable Shaft x2 3x65mm Stainless Steel Adjustable Shaft x2 Wrench and parts to attach to chassis. Compatible with DT-03 chassis cars.
€19.99
TVA incluse, plus Frais d'expédition

DT-03 Gear Shaft lightweight 5x45mm (2)

Article number: 300054560 Product: DT-03 Gear Shaft lightweight 5x45mm (2) These gear shafts are for use with the new DT-03 buggy chassis. They are lightweight compared to the standard kit included shafts resulting in a lighter and more efficient drivetrain. •Made from pipe, these shafts replace the gear shafts used with the spur gear and counter gear. They enable a reduction in weight, and enhance the model’s ability to dissipate heat. •Contents: 5x45mm Gear Shafts x2 •Compatible with DT-03 chassis cars.
€3.19
TVA incluse, plus Frais d'expédition

DT-03 Rein M Part DS Mount

Article number: 300054816 Product: DT-03 Rein M Part DS Mount These are carbon fiber-reinforced plastic M parts. The sprue contains damper stay mount, wing stay, front bumper parts and more. • DT-03 Reinforced M Parts Sprue x1 • Carbon-fiber reinforced parts improve chassis rigidity, and performance on high-grip carpet and asphalt surfaces. • Compatible with DT-03 chassis cars.
€5.69
TVA incluse, plus Frais d'expédition

DT-03 Stabilizer Set front/rear (2+2)

Article number: 300054561 Product: DT-03 Stabilizer Set front/rear (2+2) These front and rear sway bars are for use on the Tamiya DT-03 off-road chassis platform. Once installed, they allow you to tune the roll of the car depending on off-road track conditions. • Fitting these stabilizers to the front and rear of your DT-03 chassis will reduce roll and provide a better-balanced driving experience. • The set includes 2 differing stiffness of stabilizer for both the front and rear, allowing you to fine-tune your machine according to the driving conditions. • Compatible with DT-03 chassis cars.
€19.49
TVA incluse, plus Frais d'expédition

DT-03/02 M0,8 Module 17T Steel Pinion

Article number: 30004628 Product: DT-03/02 M0,8 Module 17T Steel Pinion These steel parts have greater durability compared to kit standard aluminum pinion gears, letting you run your car with increased gear life. Contains 08 Module Pinion Gear (17T) x1. Grub screw for attachment included. Compatible with DT-03 and DT-02 chassis cars.
€5.19
TVA incluse, plus Frais d'expédition

DT-03/02 M0,8 Module 19T Steel Pinion

Article number: 300054629 Product: DT-03/02 M0,8 Module 19T Steel Pinion These steel parts have greater durability compared to kit standard aluminum pinion gears, letting you run your car with increased gear life. Contains 08 Module Pinion Gear (19T) x1. Grub screw for attachment included. Compatible with DT-03 and DT-02 chassis cars.
€5.19
TVA incluse, plus Frais d'expédition

DT02&TT01 3x22 LF Sus. Shaft (4)

Article number: 300054395 Product: DT02&TT01 3x22 LF Sus. Shaft (4) These shafts are used in place of 3x22mm screw pins and ensure secure attachment thanks to E-rings. The shaft also features a low-friction coating for smoother suspension movement. Low-Friction Shaft x 4 E-rings included. Compatible with DT-02, TT-01, and WR-02 chassis.
€7.69
TVA incluse, plus Frais d'expédition

DT03 Body Neo Fighter w/ Wing PC

  Warning! Not suitable for children under 14 years.
€24.99
TVA incluse, plus Frais d'expédition

DT03 C Parts Chassis/Damper stays

  Warning! Not suitable for children under 14 years.
€15.19
TVA incluse, plus Frais d'expédition

DT03 Sticker Neo Fighter Buggy

  Warning! Not suitable for children under 14 years.
€12.99
TVA incluse, plus Frais d'expédition

DT03T/St.Blitzer Wheel Set white (2+2)

  Warning! Not suitable for children under 14 years.
€15.49
TVA incluse, plus Frais d'expédition

Dual-Block Tires fro. 62/25 Kit(2)

Article number: 300054185 Product: Dual-Block Tires fro. 62/25 Kit(2) These tires feature new tread pattern and are designed for superb control on high-traction on-road and off-road tracks. The tires are designed for use with off road buggies such as the DB-01 and DF-03 chassis. Please note the "K" denotes kit standard.
€17.79
TVA incluse, plus Frais d'expédition

Dual-Block Tires rear 62/35 Kit(2)

Article number: 300054186 Product: Dual-Block Tires rear 62/35 Kit(2) These tires feature new tread pattern and are designed for superb control on high-traction on-road and off-road tracks. The tires are designed for use with off road buggies such as the DB-01 and DF-03 chassis. Please note the "K" denotes kit standard.
€19.99
TVA incluse, plus Frais d'expédition

E PARTS BAG(E) : 56357

  Warning! Not suitable for children under 14 years.
€9.49
TVA incluse, plus Frais d'expédition

E Parts for 58365

E Parts for 58365   Warning! Not suitable for children under 14 years.
€13.89
TVA incluse, plus Frais d'expédition
Informations relatives à l'expédition

Si vous avez mis cet article dans le panier, l'adresse de livraison de votre commande est limitée aux pays suivants :

vers le haut