5 22

Catégories


Trier selon:

Meilleures ventes
  • Meilleures ventes
  • Nouveautés
  • Prix croissant
  • Prix décroissant
Filtrer

Filtrer
Prix
Catégorie
Marque
Marques & licences
Échelle
Mercedes-AMG GT3 (TT-02)

Modèles sur piste RC

Mercedes-AMG GT3 (TT-02)

€138.00

Article number: 300058639 Product: 1:10 RC Mercedes-AMG GT3 (TT-02) Tamiya continue to expand our range of kits on the entry level TT-02 with this stunning new release. It depicts the fabulous body of the Mercedes-AMG GT3 car, which was created for the GT3 class of racing from 2016 onwards. The 6.3-liter V8 powered car has quickly become a modern legend with race results like a clean sweep of the top 4 in a 2016 Nürburgring 24-hour race. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 453mm. • The luxurious, powerful form of the Mercedes-AMG GT3 is recreated in polycarbonate. • Separately molded parts are included in the kit to recreate side mirrors and the distinctive rear wing. • PS-63 Bright Gun Metal (Item 86063) is a new Tamiya Color spray for polycarbonate, formulated especially for this model. It recreates the standard works color (requires a coat of PS-55 Flat Clear on outside of body). • The beginner-friendly yet highly adaptable TT-02 is a versatile and easy-to-maintain chassis. • Comes with the 12-spoke wheels used in Item 58619. • Stickers are included to recreate the markings of the car, as are masking stickers for use when painting. • An extensive TT-02 option parts line-up offers a number of opportunities to tune your car. • Please note that R/C equipment and battery pack are separately required.

Plus
1:35 Diorama-Set Sand Bags (36+12)

Échelle 1:35

1:35 Diorama-Set Sand Bags (36+12)

€3.99

Plus
1:35 WWII Diorama-Set Barricade

Échelle 1:35

1:35 WWII Diorama-Set Barricade

€3.99

Article number: 300035027 Product: 1:35 Diorama-Set Tank Barricade This is a 1/35 scale plastic model asembly kit recreating barricades that will add a whole extra level of detail to your diorama scenes. ★Creates six each of wooden and metal barricade depictions.

Plus
1:35 WWII Fig.-Set Ger. MG Troops (7)

Échelle 1:35

1:35 WWII Fig.-Set Ger. MG Troops (7)

€5.99

Article number: 300035038 Product: 1:35 Fig.-Set Ger. MG Troops (7) This is a 1/35 scale plastic model assembly kit depicting WWII German soldiers with MG34 and MG42 machine guns. ★Features parts to make three different teams of gunner and loader, plus a commander with binoculars for seven figures in total.

Plus
1:24 McLaren Senna

Échelle 1:24

1:24 McLaren Senna

€56.99

Article number: 300024355 Product: 1:24 McLaren Senna Item Contents/Information • This is a 1/24 scale plastic model assembly kit. Length: 198mm, width: 91mm, height: 60mm. • The sleek aerodynamic body’s form is captured in style. Uniquely, it is composed of a single monocoque part onto which body panels are attached individually, allowing a highly realistic depiction of the car. • Parts are designed to be assembled into blocks of the same color, streamlining the painting process. • Features a realistic depiction of the V8 twin turbo engine and visible sections of the complex surrounding engineering. • The model can be assembled as European, U.S. or Japanese spec. • Separate parts for brake calipers and discs ensure that while the wheels (and brake discs) rotate, the caliper remains stationary for super realism. • The dashboard can be assembled in the standard roadgoing or streamlined racing positions. • Metal transfers recreate McLaren logos and more.

Plus
New
1:35 Fig-Set Sov. Infantry Assault (12)

Échelle 1:35

1:35 Fig-Set Sov. Infantry Assault (12)

€16.99

Article number: 300035207 Product: 1:35 Fig-Set Sov. Infantry Assault (12) This is a 1/35 scale plastic assembly model set of a Russian Army Assault Infantry unit which protected Mother Russia against the invading German forces during WWII. This set includes 12 figures in different poses such as a commander pointing and giving instructions, as well as soldiers shooting from up above and jumping off a tank. Uniforms depict those worn at the Kursk front from 1943 through to the end of the war. The PPsh-41 submachine gun also known as the "Mandolin" and the Degtyaryov light machine gun both feature a sharp finish. T34-85 Russian Medium Tank not included.

Plus
1:35 WWII Ger.Milit.Insignia Decal Vol.2

Échelle 1:35

1:35 WWII Ger.Milit.Insignia Decal Vol.2

€9.99

Article number: 300012641 Product: 1/35 WWII Ger.Milit.Insignia Decal Vol.2 Add further fine details to your 1/35 scale German WWII Infantry figures with this easy-to-use decal set. These are designed with the modeler in mind to save time and stress allowing for a more realistic finish. 1:35

Plus
1:35 Diorama-Set Motorcycle Orderly (2)

Échelle 1:35

1:35 Diorama-Set Motorcycle Orderly (2)

€11.99

Article number: 300035241 Product: 1:35 Diorama-Set Motorcycle Orderly (2) During WWII, the German army adopted the use of the DKW NZ350 medium sized motorcycle; it is included with this set along with a sign post and a military police officer figure who is giving directions to the rider figure with an opened map. Parts of the NZ350 including the suspension and engine area as well as separate parts to depict the side bags and exhaust are finished with rich detail. Both figures feature natural poses and realistic expressions. The road signs seen on the post from Normandy, France are printed on the box and can be easily cut out and used when recreating your diorama. Two figures included.

Plus
1:35 Sov. KV-1B 1940 Heavy MBT (1)

Échelle 1:35

1:35 Sov. KV-1B 1940 Heavy MBT (1)

€26.99

Article number: 300135142 Product: 1:35 Sov. KV-1B 1940 Heavy MBT (1) Along with the T-34, the KV series of heavy tanks played a vital role for Soviet forces in WWII. This precision plastic model recreates the KV-1B variant, which was up-armored compared to the original KV-1, on account of fears about improved German weaponry. The bolt-fastened 25-35mm applique armor gave total armor thicknesses of 120mm on the turret front, 110mm on the turret sides and hull front, and 75-110mm on the hull sides. In combination with the imposing 76.2mm main gun and a 550hp diesel engine, this made the KV-1B (manufactured from July 1941) a daunting proposition for enemy units. • 1/35 scale plastic model assembly kit. Length: 194mm, width: 96mm. • The form of the up-armored turret and hull is captured exquisitely, with the numerous bolts depicted accurately. • Model can be assembled with commander's hatch in open or closed position. • The main gun offers elevation and depression. • Steel road wheels are authentically rendered in plastic. • 3 markings options are included; with various Russian language slogans and markings: • Marking Option 1: Aug. 1941, Leningrad (suburb of Luga); Option 2: Summer, 1941; Option 3: Sept. 1941. • Comes with 1 standing crewman figure.

Plus
1:35 WWII Fig-Set Ger.Front-Line Sold(5)

Échelle 1:35

1:35 WWII Fig-Set Ger.Front-Line Sold(5)

€10.99

Article number: 300035196 Product: 1:35 Fig-Set Ger. Front-Line Soldiers(5) During WWII, German soldiers belonging to armored divisions wore camouflage smocks and M44 field uniforms. This is a plastic assembly kit of five figures which features a noncommissioned officer and a soldier in charging poses armed with a panzerfaust and a MP44 assault rifle, a soldier shooting an MG42 machine gun from his waist, a soldier throwing a hand grenade, and another noncommissioned officer firing his MP44 from his knees. Weapons and accessory parts such as water bottles and gas mask cases all have a sharp detailed finish. Why not display this set with a German armored vehicle model such as a Sd.Kfz. 251/1?

Plus
1:48 Ger. PzKpfw. 38(t) Ausf.E/F

Échelle 1:48

1:48 Ger. PzKpfw. 38(t) Ausf.E/F

€18.99

Article number: 300032583 Product: 1:48 WWII PzKpfw. 38(t) Ausf. E/F This is a model of the German light tank 38(t) in 1/48 scale. The 38(t) was designed and entered production for the Czechoslovak Army as the LT vz. 38, however before any could be delivered Germany occupied then divided the country. They rated the tank highly, ordering continued production of the initial lot of 150, renaming it the 38(t) with (t) denoting its Czech origin. It went on to serve as the front-line tank for the Wehrmacht in early WWII, from the initial operations in Poland up to and including Operation Barbarossa, the invasion of the Soviet Union in June 1941. It wielded a 37mm gun with 90 rounds on board, a coaxial 7.92mm MG37(t) machine gun, and another MG37 on the front left of the vehicle. 42km/h was squeezed out of the 6-cylinder engine. Ausf.E/F 38(t) variants featured doubled front armor thickness at 50mm, with 30mm on the hull and turret sides. 525 were produced in the period from November 1940 to October 1941.

Plus
1:48 Mitsu. A6M3 Zero Fighter T32 Hamp

Échelle 1:48

1:48 Mitsu. A6M3 Zero Fighter T32 Hamp

€14.99

Article number: 300061025 Product: 1:48 Mitsu. A6M3 Zero Fighter T32 Hamp About the A6M3 Type 32 Zero Fighter (HAMP) Much has been written over the years about the Japanese Zero Fighter Aircraft series. Much was based upon hearsay and legend and little upon fact itself. Even the Allied Forces and governments refused at first to acknowledge its existence, and when they did get a copy of it, they could hardly believe the performance it produced. The prototype zero or A6M1 first took place on paper on January 17, 1938, following the Japanese request for a shipboard fighter with a top speed of 27o kph at 12000 ft 7 6-8 hours of cruise economy endurance and 1.5-2 hours at normal combat speeds. Armament was to be two 20mm cannon and two 7.7mm machine guns plus the normal radio equipment and direction finding gear. These specifications wee so far from the existing state of the art that the famous Nakajima Company dropped out of competition, stating that they were impossible to meet. That left Mitsubishi Heavy Industries and their design team headed by Jiro Horikoshi the only company to tackle the problem. First flight was on 1 April 1939 and combat trials were concluded in July 1940 with 15 pre-production A6M2's sent to two squadrons by the end of the month. These aircraft had folding wing tips to accommodate aircraft carrier elevators, and were the ones first seen by Gen. Chennault in China, and at Pearl Harbor in December 1941. Although the A6M2 met or exceeded original design specifications, modifications were taking place at the Mitsubishi factory to improve roll rate, speed up handling aboard carriers, and utilize the uprated Sakae 21, 1,130 hp engine. The first A6M3 type 32 (code named HAMP) took to the air on 15 July 1941 with production beginning in April 42. A total of 343 aircraft were produced by August 43, when the type 52 A6M5 began production. The Type 32 Zero had the most radical change in the entir

Plus
1:48 WWII Dt. Focke Wulf Fw190 A-3

Échelle 1:48

1:48 WWII Dt. Focke Wulf Fw190 A-3

€25.99

Article number: 300061037 Product: 1:48 Ger. Focke Wulf Fw190 A-3 The Focke-Wulf Fw 190 served alongside the Messerschmitt Bf 109 to defend Germany from the mid stages of WWII to the end of the war. This kit reproduces the A-3 variant of the Fw 190, which outclassed the RAF's Spitfire Mk.V when it entered service. The aircraft's characteristic radial engine features fine cooling fin and exhaust details. Three marking options, including an aircraft flown by German ace Hans Hahn, are included.

Plus
VW Karmann Ghia (M-06)

Modèles sur piste RC

VW Karmann Ghia (M-06)

€157.00

Article number: 300058677 Product: 1:10 RC VW Karmann Ghia (M-06) The ever-increasing stable of Tamiya R/C cars welcomes a brand new model of a classic car, with the addition of the Volkswagen Karmann Ghia to the line-up, on the RWD M-06 chassis. The Karmann Ghia was a stylish coupé based upon the same platform as the legendary Beetle. Its body was designed by Italian firm Ghia and manufactured by the German company Karmann. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 410mm, width: 182mm, height: 125mm. • The classic form of the car is accurately captured in lightweight and durable polycarbonate. Separate plated parts depict side mirror, bumpers and light cases. • Includes marking stickers, and masking stickers for use during the paint job. • The M-06 chassis features a rear-motor, RWD setup with a longitudinally-mounted battery pack and R/C units positioned on either side for optimum balance and a low center of gravity. • This model utilizes the 239mm wheelbase M-06L chassis. • Metal-plated wheels make for a great look, and are paired with front radial and rear super grip radials for superior stability and sharp handling. • A host of Hop-Up Option parts are available to customize the chassis to your driving needs. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

Plus
1/12 Kawasaki Ninja H2 Carbon

Échelle 1:12

1/12 Kawasaki Ninja H2 Carbon

€45.99

Article number: 300014136 Product: 1/12 Kawasaki Ninja H2 Carbon Beast on the Streets 2014 was a vintage year for fans of Japanese motorcycle manufacturer Kawasaki as it saw the announcement of the Ninja H2 at the Milan Motorcycle Shows (EICMA), a bike whose name can be traced back to 1971 and the popular 750-SS/Mach IV (H2) street bike. In the modern H2, Kawasaki designers strove to provide hitherto unexperienced acceleration, and they certainly pulled out all the stops with a powerful combination of a 998cc inline-4 engine and centrifugal supercharger, mounted in an elegant trellis frame and providing an impressive 200hp. The body is also a work of aerodynamic art, with an upper cowl featuring ram air intakes and bottom chin spoiler plus a stylish single headlight. Mirrors have a cut-off design to ensure they contribute aerodynamically, and plenty of electronic rider aids are also on offer. The special Carbon spec of the Ninja H2 released in 2017 had carbon fiber upper cowl, an enhanced 205hp engine and many other upgrades. About the Model ★This is a 1/12 scale plastic model assembly kit. Length: 174mm, width: 76mm, height: 96mm. ★Features a realistic depiction of the inline-4 engine and supercharger. ★H2 road bike spec upper cowl with headlight and mirrors, side cowls and rear cowls really capture the bike's aerodynamics in style. ★Metal-plated parts are used to recreate muffler, light cases and more. ★Synthetic rubber tires are given authentic tread patterns. ★Cowls, engine and swingarm are attached to the frame via screws. ★The Kawasaki "river mark" logo is rendered beautifully by a metal transfer. ★Clear parts are employed for headlight and taillight sections. ★Masking stickers are included to aid with demarcation in the painting of the fuel tank.

Plus
1/12 Street Rider

Échelle 1:12

1/12 Street Rider

€15.99

Article number: 300014137 Product: 1:12 Fig. Street Rider The 1/12 Motorcycle Series welcomes a brand new, original figure in the form of the Street Rider, a male figure in casual bike gear which is perfectly suited to display with our models in the series, particularly street bikes. It features a number of options with regard to helmet, pose and eyewear. Take this chance to make a little diorama from your latest motorcycle masterpiece! About the Model • This is a 1/12 scale plastic model assembly kit. • The latest 3D scanning techniques ensure that this is a finely molded figure with excellent detail including natural rendering of folds and creases on the clothing. • Included are parts to make either of two different options: i) the rider helmeted and pulling on his gloves, ready to mount the bike; or ii) the rider having just got off the bike, helmet in hand and with a wooly hat on his head. • Features parts to create either half or three-quarter helmet. • Optional sunglasses and helmet visor are also included. • Comes with a screw-affixed base for stable display.

Plus
1/24 Lotus Europa Special

Échelle 1:24

1/24 Lotus Europa Special

€39.99

Article number: 300024358 Product: 1/24 Lotus Europa Special This is a welcome first re-issue in ten years for our model of the Lotus Europa Special (previously Item 24212), with a number of updates to the kit. The Europa is a lightweight masterpiece of a sports car packed with features more likely seen on a racing car in its era: a sleek, low body, midship mounted engine and FRP frame components. Europas were manufactured between 1966 and 1972, and the Special was the final version of the car. It had a "big valve" 126hp 1,558cc four cylinder engine, five-speed transmission and alloy wheels. About the Model • This is a 1/24 scale plastic model assembly kit. Length: 168mm, width: 73mm. • The honed Europa design and low body are authentically captured in 1/24 scale. • With the removal of the hood, the engine can be viewed even after completion. It features twin carburetor, 5- speed transmission, and shift linkage in the rear, plus new air funnels. • New parts are included for a rear wing and RS Watanabe option wheels. • Y-shaped backbone frame is molded together with rear radius arms as one piece. Front double wishbone suspension, stabilizer, rear upright, and engine are all attached onto this frame. • The floor is directly attached to the built up frame, and the body is mounted on top. • Features redesigned decals, plus new photo-etched parts (front grille) and seatbelt stickers. • A new instruction manual is planned. • A realistic cockpit sports instrument panel, high backed seats, 3-spoke steering wheel, and short gear shift. • Lotus logo, emblems and mirror surfaces are recreated by metal transfers.

Plus
1/35 Marder

Échelle 1:35

1/35 Marder

€32.99

Article number: 300035370 Product: 1:35 Ger. Marder I Tank Destroyer This is the latest subject in the long-running Tamiya 1/35 Military Miniature Series. The Marder I was one of the early German efforts to update a military that – despite crushing early successes against Poland and the Allied early in WWII – was in sore need of mechanization. Based upon the French Lorraine supply tractor, it was one of a number of commandeered vehicles pressed into German service. Around 170 were produced from May 1942, and their 7.5cm Pak40 anti-tank gun was a threat to Allied AFVs in France post-Normandy landings, and also on the Eastern Front and even North Africa. About the Model • This is a 1/35 scale plastic model assembly kit. • Tamiya designers worked up close with a specimen in the Musée de Blindés, Saumur. The result is a highly accurate depiction of the compact chassis and bulging upper hull, complete with rivet and weld line details. • Interior features gun breech detail, sights, racks, radio equipment and more. • Assembly type tracks have single piece straight sections. • Bogies have an ergonomic parts breakdown. • Two figures are pictured looking to the skies, hinting at the breakdown of air control from their Luftwaffe after the Normandy landings. • Comes with three marking options, two from Normandy and one from the Eastern Front.

Plus
1:10 RC Wild Willy 2000 (WR-02)

Modèles hors piste RC

1:10 RC Wild Willy 2000 (WR-02)

€181.00

Article number: 300058242 Product: 1:10 RC Wild Willy 2000 (WR-02) The Wild Willy 2 is a reproduction of the popular original Wild Willy from the mid 80s. The new Wild Willy has an all new chassis and larger tires allowing it to tread over rough terrain. Of course, the Wild Willys trade mark is the animated wheelie capability thanks to an all new wheelie bar. WR-02 Chassis: The WR-02 chassis features a heavy duty monocoque which has side frames to increase rigidity. R/C unit, motor, and battery pack are positioned along the centerline of the chassis and the motor's power is delivered to the rear wheels via a fully-enclosed gearbox equipped with a differential. A wheelie bar is fitted to enable exciting, wheels in the air driving action. 4-wheel double wishbone suspension and 2-piece steering tie-rod offer smooth steering response. Tires/wheels and the gearbox/motor come pre-assembled for ease of assembly. Requires: 2-channel radio, 7.2 volt battery & charger, and Tamiya TS paint Wild Willy 2

Plus
1:12 Panigale 1199 S Frt. Fork

Échelle 1:12

1:12 Panigale 1199 S Frt. Fork

€26.99

Article number: 300012657 Product: 1:12 Frt. Fork Ducati Panigale 1199 S Add an even deeper layer of realism to your 1/12 scale model of the Ducati 1199 Panigale S using this detail up parts set depicting the bike's font fork! Metal and plastic parts are included to replace kit standard parts and they provide an ultra-realistic finish to the model. Specifications: • The set provides ten separate types of parts including inner and outer tubes, plus parts depicting smaller pieces of the fork such as connectors and end caps. • Aluminum outer tubes feature a gold anodized finish and are combined with other aluminum, brass and plastic parts to not only provide a highly realistic appearance, but also give the model an authentic feel.

Plus
1:12 RC X-SA Lunch Box

Modèles hors piste RC

1:12 RC X-SA Lunch Box

€190.00

Article number: 300046701 Product: 1:12 RC X-SA Lunch Box The first classic Tamiya model to join the brand new X-SA series is the Lunch Box, favored basher of many an R/C fan and offering an all-around fun 2WD drive on those iconic bulging tires! About the Model • This is a 1/12 scale finished R/C model. Length: 385mm, width: 290mm, height: 225mm. Wheelbase: 207mm. • The classic Lunch Box body is molded in styrene plastic in the original yellow, with the now legendary markings already applied. • Yellow wheels are paired with 115mm tires for some serious off-road capacity. • The durable and easy-to-assemble 2WD chassis features a box type frame with front swing arm independent and rear rolling rigid suspension setups. • A pre-assembled, sealed gearbox protects the diff gear from sand and other intruding debris. • Features a rear wheelie bar for wild wheels-in-the-air driving. • Requires separately sold R/C equipment, battery pack and charger.

Plus
1:14 RC 3-Axle-ReeferSemi Trailer Kit

Camions RC

1:14 RC 3-Axle-ReeferSemi Trailer Kit

€447.00

Article number: 300156319 Product: 1/14 RC 3-Axle-ReeferSemi Trailer Kit Owners of Tamiya's 1/14 R/C trucks have been calling for a 3-axled trailer to better recreate the load outs of trucks in their respective countries. We are now proud to present this brand new 3-axle Reefer (Refrigerated) Semi-Trailer to further distinguish our unique lineup of R/C truck products.   Warning! Not suitable for children under 14 years.

Plus
1:32 Mc Donnell F4 C/D PHANTOM II

Échelle 1:32

1:32 Mc Donnell F4 C/D PHANTOM II

€109.00

Article number: 300060305 Product: 1:32 Mc Donnell F4 C/D PHANTOM II The F-4 Phantom II was originally conceived as a carrier-borne fighter for the Navy in the late 1950s but was eventually also adapted by the Air Force and Marines in addition to the air forces of many other countries. This model kit can depict the first variant used by the Air Force, the F-4C, as well the subsequently upgraded F-4D. The kit features a one-piece fuselage for easy assembly and die-cast metal landing gear legs to ensure a stable stance after the kit is finished. The canopy and airbrake may be assembled in either open or closed positions. A wide range of ordnance, two crew figures, and three marking options are also included.

Plus
1:35 WWII Dt. Flak-Pz IV Wirbelwind (4)

Échelle 1:35

1:35 WWII Dt. Flak-Pz IV Wirbelwind (4)

€36.99

Article number: 300035233 Product: 1:35 Ger. Flak-Pz IV Wirbelwind (4) Built in the latter half of WWII to protect main military units from Allied fighter-bomber attacks was the German Flakpanzer IV Wirbelwind, which now comes represented as a plastic assembly model kit. The form of the Wirbelwind’s unique turret which compromised 18 armor plates has been faithfully reproduced with this model. Another accurately reproduced feature of the Wirbelwind is its four 20mm anti-aircraft guns which can be moved up and down even after assembly. The front mounted Notek light and the rear mounted spare gun barrel cases have a rich finish. Also included in the kit is an officer figure scanning the sky with binoculars, two gunners, and an ammunition loader all dressed in winter uniforms.

Plus
1:35 WWII Fig.-Set Ger.Mortar-Troop (4)

Échelle 1:35

1:35 WWII Fig.-Set Ger.Mortar-Troop (4)

€8.99

Article number: 300035193 Product: 1:35 Fig.-Set Ger.Mortar-Troop (4) During WWII, the German infantry were issued with the precise 8cm GrW 34 mortar. This plastic assembly model kit realistically depicts a German infantry mortar team about to fire the weapon with two soldiers holding it down, one loading it, and one yelling "fire!" The 8cm GrW 34 mortar can also be depicted in an unassembled state for when it is not in use. Parts to depict wooden and metal ammunition cases (two each), plus mortar shells further enrich the kit.

Plus
1:35 WWII Figure-Set US Army Infant.(4)

Échelle 1:35

1:35 WWII Figure-Set US Army Infant.(4)

€4.99

Article number: 300035013 Product: 1:35 Figure-Set US Army Infant. (4) This is a 1/35 scale plastic model assembly kit depicting U.S. infantry in Western Europe after the Normandy Landings in June 1944. ★Their subjects are captured in realistic pose: lobbing a grenade, cocking firearms and holding a flamethrower. ★Three of the figures are depicted in standard cloth legwear, and one in leather.

Plus
1:35 WWII Pkw.K1 Kübelwagen Typ82 (1)

Échelle 1:35

1:35 WWII Pkw.K1 Kübelwagen Typ82 (1)

€15.99

Article number: 300035213 Product: 1:35 Ger. Pkw.K1 Kübelwagen Typ82 (1) The highly reliable, compact Kübelwagen Type 82, which served as transportation for high ranking German officers throughout WWII, now comes realized as a plastic assembly model kit. ★The model realistically captures the functional form of this mass produced car. ★The plain constitution of the press-lined body as well as the suspension arms, under guards, suspension area, and interior details such as the instrument panel and pedals all feature a realistic finish. ★You may choose to assemble all four doors in either open or closed positions. ★A figure depicting a driver in a relaxed pose is included.

Plus
1:35 WWII SdKfz.142/1 Sturmgesch.IIIG(2)

Échelle 1:35

1:35 WWII SdKfz.142/1 Sturmgesch.IIIG(2)

€38.99

Article number: 300035197 Product: 1:35 Ger. SdKfz.142/1 Sturmgesch.IIIG(2) During WWII, the German army used self-propelled guns in large quantities with one such gun being the German Sturmgeschutz III. This plastic assembly model kit realistically reproduces the form of the Ausf.G early version which was manufactured from December 1942. The distinctive low silhouette of the StuG III, with the fighting compartment mounted onto the Panzer III's hull, features great scale realism. The kit also includes parts to allow you to depict the StuG III with either a 7.5cm anti-tank howitzer or the 10.5cm gun used to support the infantry units. Parts to depict Schürzen armor as well as two figures in relaxed pose feeding and holding a puppy are also included.

Plus
1:35 WWII US Sherman M4A3 75mm Late.(9)

Échelle 1:35

1:35 WWII US Sherman M4A3 75mm Late.(9)

€38.99

Article number: 300035250 Product: 1:35 US Sherman M4A3 75mm Late (9) About the Model ★Plastic assembly model kit based on the main tank of the WWII U.S., the M4 Sherman. ★Overall length: 172mm, overall width: 76mm. ★The smooth form of the cast turret with 75mm gun and welded hull of this late production M4A3 tank overflow with realism. ★Two kinds of commander's cupolas; loader's hatch and other hull and turret hatches can be modeled in the open or closed position. ★Two kinds of road wheels and sprockets can be selected; rubber padded tracks also included. ★Three crewman and one tank commander in realistic poses bring an air of excitement to the kit. ★Included equipment includes ammunition boxes, tripod, ration boxes, and much more. ★Three types of decals included.

Plus
1:35/1:16 WWII Figuren-Rangabzeichen

Échelle 1:35

1:35/1:16 WWII Figuren-Rangabzeichen

€9.99

Article number: 300112625 Product: 1:35/1:16 WWII Figure Insignia Decal-Set Use these easy-to-use German Military Insignia decals to add even more exquisite detail to your WWII German military figures. These are designed with the modeller in mind to save time and stress allowing for a more realistic finish. WW2 Ger.Insignia 1/16 1/35

Plus
1:48 Diorama-Set Jerry Can&Barral

Échelle 1:48

1:48 Diorama-Set Jerry Can&Barral

€10.99

Article number: 300032510 Product: 1:48 Diorama-Set Jerry Can&Barrel Originally used by the Germans, Jerry cans Ewere soon used by the Allies as well to transport fuel and water. Set includes drum cans, Jerry cans, bags and other equipment for use with 1/48 MMV series models. Comes with both Allied and German versions.

Plus
1:6 Honda Monkey 2000 Anniversary

Échelle 1:6

1:6 Honda Monkey 2000 Anniversary

€63.99

Article number: 300016030 Product: 1/6 Honda Monkey 2000 Anniversary About the Honda Monkey 2000 Anniversary It was back in 1961 that a curious mini-motorcycle was seen putting around Honda's "Tama Tech" amusement park. One of the most popular rides in the park, it sported a red frame under a white gas tank, tiny 5 inch tires and a peppy 50cc engine. Riders were said to appear, of all things, simian, and henceforth the motorcycle came to be known as the Honda Monkey. Looking more like a toy than a motorcycle, the compactness and fresh appearance of the Monkey scored high with fans of all ages. Honda revamped the Z100 park version for use on public roads, and brought out the CZ100 model which began to be exported in 1963. The first model to be marketed in Japan was the improved Z50M Monkey, which featured folding handlebars and seat for easy stowing in a passenger car. In January 2000, Honda brought out the 2000 anniversary edition of the Monkey, which sported the image coloring of the 1971 Z50Z(2) model. The production of this special Monkey was limited to 3000 motorcycles. The continued appeal of the Monkey must be both its diminutive size and ease of customization. Each Monkey owner is free to interchange any number of components including the engine parts, carburetor, exhaust pipe and suspension. In fact, over 1500 custom parts are marketed for this playful mini-bike.

Plus
Arocs 3363 (Light Gun Metal)

Camions RC

Arocs 3363 (Light Gun Metal)

€428.00

Article number: 300056359 Product: 1:14 RC Arocs 3363 (Light Gun Metal) This is a special edition of the R/C Mercedes Benz Arocs (Item 56352), the super-stylish 3-axle truck with distinctive bucket tooth grille. It is a great option for those without the time or confidence to apply a paint job to their kit, as the cab, H, K, and M parts of the kit are pre-painted in Light Gun Metal (Tamiya Color TS-42), and given a urethane coating for a beautiful finish, and protection from damage. About the Model • This is a 1/14 scale R/C model assembly kit. Length: 529mm, width: 190mm, height: 267mm. The narrow body of the ClassicSpace variant Arocs 3363 is recreated accurately, complete with the distinctive "buckettooth" grille and headlight guards. Cab, H, K, and M parts are molded in gray, pre-painted in Light Gun Metal (TS-42), with a urethane top coat for a stunning finish. Photo- etched parts recreate cab rear platform. • Interior features such as seat and dashboard are depicted. • 3-axle chassis utilizes ladder frame with aluminum side channels and resin cross members. Realistic drivetrain has a front mounted motor powering twin rear axles. • 3-speed transmission can be controlled via 4ch R/C transmitter. • Highly realistic suspension employs metal leaf spring dampers and friction dampers. • Coupler is included to enable connection with any currently available Tamiya 1/14 scale trailer. • Compatible with tractor truck option parts (TROP) such as Items 56531, 56532, 56536 and 56538. Use with Multi-Function Control Unit MFC-03 (Item 56523) (or MFC-01, Item 56511) for realistic lights and sounds.

Plus
Carbon Decal Twill EF

Échelle 1:24

Carbon Decal Twill EF

€6.99

Article number: 300012682 Product: 1:6/1:12/1:24 Carbon Dekor Köper/Ex.Fein Carbon weave decals are a great way to enhance your models level of realism. Many of Tamiya’s car and motorcycle subjects have parts that depict raw carbon parts, such as winglets, spoilers, and body panels. With Tamiya carbon fiber decal sheets, you can easily replicate these parts on your model with relative ease. Simply cut to the size and shape of the section that you want to cover, and apply. When used in conjunction with Tamiya MARK FIT and MARK FIT STRONG (Tamiya’s decal setting solution solvents), forming the decal sheet to curved surfaces make application even easier. • Sheet dimension: 130mm x 190mm x1. • Sheet features no pre-marked shapes and can be cut to desired shape and size. • Great for use on static models of bikes, cars and more from 1/6 to 1/24 scale. .

Plus
Mercedes-Benz G 500 (CC-02)

Modèles hors piste RC

Mercedes-Benz G 500 (CC-02)

€257.00

Article number: 300058675 Product: 1:10 RC MB G-Class G500 (CC-02) Get ready for a newcomer to the Tamiya off-road chassis line-up – the CC-02 is here! Even better, its first model comes with a brand new body that depicts the Mercedes-Benz G 500, a 2018 addition to the German auto giant's legendary G Class that was powered by a 4-liter V8 twin turbo engine. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 455mm, width: 196mm, height: 207mm. Wheelbase: 267mm. • TLU-01 LED Light Unit and LEDs are included for export only! LED attachment parts are also included. • The boxy form of the G 500 is recreated accurately in polycarbonate, with separately molded parts included for the front grille, side mirrors and spare tire cover. • Designed for a wide range of off-road scenes including rocky terrain, the CC-02 chassis’ ladder frame is inspired by full-size vehicles and is the base for its superior durability. • A 4WD setup employs the motor longitudinally behind the front axle, with separated gearbox and transfer case, and propeller shafts transmitting power to the differential gears front and rear. • Twenty gear ratios between 11.09:1 and 29.28:1 are possible using separately sold pinion gears, for some serious fine-tuning! • 4-link rigid suspension is employed front and rear, with CVA oil dampers. See over the page for a more detailed introduction to the CC-02!

Plus
NSU TT Jager (M-05)

Modèles sur piste RC

NSU TT Jager (M-05)

€119.00

Article number: 300058649 Product: 1:10 RC NSU TT Jager (M-05) West German manufacturer NSU's Prinz was a highly popular compact car, produced between 1958 and 1973. This model recreates the Jägermeister-sponsored edition of the NSU TT, a race-oriented variant of the Prinz, of which almost 2,500 examples were built in the late 1960s and early 1970s. It was powered by a variety of inline-4 engines depending upon the spec. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 393mm. • The form of the NSU TT Jägermeister is recreated faithfully in polycarbonate. • The M-05 chassis is a compact unit based around a lightweight monocoque and offering great weight distribution with a low center of gravity. • This model uses the 239mm L wheelbase. • Gold color multi-spoke wheels are those seen on Item 47308, paired with M-Chassis slick tires. • Comes with marking stickers, plus masking stickers for use when painting the body. • The popular M-05 has a wide range of Hop-Up Option parts available to tune the chassis.

Plus
1/12 Honda Monkey 125

Échelle 1:12

1/12 Honda Monkey 125

€31.99

Article number: 300014134 Product: 1/12 Honda Monkey 125 This is a new entry into the famed 1/12 Motorcycle Series, as the all-new Honda Monkey 125 – which went on sale in mid-2018 – quickly joins the Tamiya line-up, too! The Monkey line was first sold in Japan in 1967, and soon gained long-lasting worldwide acclaim with its rather diminutive yet cheerful design. The Monkey 125 features a bigger 124cc engine, yet is packed with the Monkey’s trademark cheeky charm – chunky tires, rounded design motifs for headlight, speedo and more, plus gleaming chromed fenders and muffler cover. This playful little monkey looks set to be another worldwide hit, and now you can get your hands on it, in detailedTamiya 1/12! About the Model - This is a 1/12 scale plastic model assembly kit.   Length: 142mm, width: 63mm, height: 86mm. - The compact, quirky form of the Monkey 125 is captured with   superb accuracy. - Engine, swing arm, front fork and rear fender parts are secured   to the frame using screws for a durable finish. - Metal-plated parts are used to depict fenders and light cases. - Depictions of the chunky tires are dedicated parts for this model. - Comes with clear parts, damper springs, vinyl tubing to recreate   various lines, and of course decals to recreate markings.

Plus
1/12 XV1600 RoadStar Custom

Échelle 1:12

1/12 XV1600 RoadStar Custom

€42.99

Article number: 300014135 Product: 1:12 Yamaha XV1600 RoadStar Custom Big cruiser bikes are popular across the world, and a lot of owners like nothing more than to customize them to their own unique tastes. This updated assembly kit recreates just such a bike, a customized version of the mighty Yamaha XV1600 Road Star, the standard version of which was released as Item 14080. The XV1600 Road Star featured a 1,600cc V-twin that made it one of the most powerful motorcycles of its day, with telescopic front suspension and a rear shock tucked out of sight for a classic hardtail look to accentuate the low-slung lines, and liberal use of chrome. Customized bikes had side bags, a larger windshield, and many more variations. Item Contents/Information • This is a 1/12 scale plastic model assembly kit. Length: 208mm, width; 89mm, height: 120mm. • A customized version of the low-slung XV1600 Road Star is recreated in style, with metal-plated and clear parts, plus those recreating customized parts. • Comes with decals to recreate two marking options (green & black, or purple) which were available on bikes sold in Japan in 2000, plus masking stickers to help with the paint job. • The delicate fins of the air-cooled engine, spoke wheels and the slender brake and clutch lines all add to the realism of this motorcycle masterpiece.

Plus
1/24 TS050 HYBRID 2019

Échelle 1:24

1/24 TS050 HYBRID 2019

€46.99

Article number: 300025421 Product: 1:24 Toyota G.R. 2019 TS050 Hybrid About the model • This is a 1/24 scale plastic model assembly kit. Length: 194mm, width: 79mm, height: 44mm. • The form of the 2018/2019 season version of the TS050 Hybrid is captured with superb accuracy: updated aerodynamics components (both exterior and interior), longer front fenders, and tweaked diffuser design. • A busy interior features depictions of the driver seat, lithium-ion battery and more. • Metal-plated part is used to recreate the silver section on the top of the cockpit. • Also included are updated decals for the numerous sponsor logos on the 2019 number 7 and 8 cars as they appeared in rounds 7 and 8 of their season, plus updated masking stickers for use in the paint job. • Dedicated metal transfers recreate side mirror surfaces and headlight sections.

Plus
1/35 6-Wheeled Sd.Kfz. 231

Échelle 1:35

1/35 6-Wheeled Sd.Kfz. 231

€45.99

Article number: 300037024 Product: 1:35 SdKfz.231 6-Rad Panzerspähwagen This model takes the classic Italeri model of the Sd.Kfz. 232 and transforms it into the frame antenna-less Sd.Kfz. 231, with new and updated parts from the Italian maker, plus Tamiya figure, metal gun barrel, decals and instruction manual, all packaged in a Tamiya box! The 6-wheeled Sd.Kfz. armored cars were produced from the early 1930s as German forces rearmed and mechanized. Based on a civilian vehicle chassis, they utilized sloped armor and a 20mm cannon. Even though these vehicles were replaced by 8-wheeled counterparts during that time, they still saw action in Poland and France during WWII.

Plus
1/35 Marder III M Normandy

Échelle 1:35

1/35 Marder III M Normandy

€42.99

Article number: 300035364 Product: 1:35 Ger. Marder III M Normandy About the Model ★This is a 1/35 scale plastic model assembly kit. Length: 149.5mm, width: 61mm. ★The distinctive, compact form of the AFV is captured with aplomb. ★Detailed interior really catches the eye. ★Assembly type tracks feature single piece straight sections. ★12 depictions of shells are included, and can be stowed in the rack. ★Features a photo-etched part to capture the muffler cover. ★Includes four full body figures and one torso, plus two marking options.

Plus
1/48 Swiss Bf109 E-3

Échelle 1:48

1/48 Swiss Bf109 E-3

€26.99

Article number: 300025200 Product: 1:48 ME Swiss Bf109 E-3 ★This special edition kit allows recreation of one of the Bf109 E-3 aircraft operated by Swiss forces during and after WWII. ★Includes markings to recreate the bright Swiss flag designs that were applied to stop them being mistaken for German Luftwaffe aircraft. ★Comes with two marking options in total. ★Features a full colour painting guide to assist in the creation of your masterpiece, plus a dedicated background story. ★Comes in a white package with printed color product label ★Choose open or closed canopy when assembling. ★Includes a pilot figure to add an extra level of detail to your model

Plus
1/48 T-55

Échelle 1:48

1/48 T-55

€23.99

Article number: 300032598 Product: 1:48 Rus. T-55 Battle Tank Here is the latest addition to the ever-growing 1/48 Military Miniature Series, creating the mass-produced masterpiece T-55 medium tank that not only provided a base for later T-62, T-72 and T-80 designs still in use today, it spurred Western rivals on and contributed to the great East-West arms race of the Cold War. Its 100mm gun compared favorably with the West’s 90mm counterpart, and with HEAT rounds could defeat up to 390mm of armor. The T-55 was produced in the USSR, and under license in Czechoslovakia and Poland, and supplied to Soviet countries and clients worldwide – it even faced off against U.S.-designed M48s and M60A1s in the Middle East. About the Model • This is a 1/48 scale plastic model assembly kit. Length: 190mm, width: 69mm. • The low, refined T-55 form with hemispherical turret and 100mm gun is captured artfully in compact 1/48 scale. • Features authentic recreations of weld lines and cast turret surfaces. • The 100mm main gun and anti-aircraft machine gun give a realistic finish. • Assembly type tracks have single piece straight sections. • Comes with a commander torso figure surveying the scene in front, and decals to create a single marking option.

Plus
1/6 Honda CRF1000L Africa Twin

Échelle 1:6

1/6 Honda CRF1000L Africa Twin

€219.00

Article number: 300016042 Product: 1:6 Honda CRF 1000L Africa Twin Enduro This large-scale motorcycle series model depicts the CRF1000L Africa Twin, Honda's modern adventure touring motorcycle inspired by their legendary 4-time Paris-Dakar champion off-road bike. The CRF1000L was released in 2015 and boasts a 998cc parallel-twin engine with a reported 92hp, plus an array of technology such as dual clutch transmission, selectable torque control for slippery surfaces, and ABS brakes. This assembly kit captures the bikes most minute detail in every way. It is sure to wow the most discerning model enthusiast at this very large scale!

Plus
1/6 Link-Type Motorcycle Chain

Échelle 1:6

1/6 Link-Type Motorcycle Chain

€40.99

Article number: 300012674 Product: 1/6 Link-Type Motorcycle Chain This assembly-type 1/6 scale chain is designed to go with the 1/6 scale Honda CRF1000L Africa Twin model kit. It promises to add an extra level of unbelievable detail to your masterpiece. •Includes individual assembly chain links consisting of individual plastic plates and metal spacers. •The completed chain will fit neatly onto the drive sprocket in Item 16042 Honda CRF1000L Africa Twin. •Includes a handy jig which aids construction. •Parts included in Item 16042 allow adjustment of the chain tension when it is fitted to the model.

Plus
1991 Audi V8 Touring (TT-02)

Modèles sur piste RC

1991 Audi V8 Touring (TT-02)

€143.00

Article number: 300058682 Product: 1:10 RC 1991 Audi V8 Touring (TT-02) Tamiya is delighted to announce the appearance of another classic racing car on our popular TT-02 chassis, this time the Audi V8 touring car with a 456hp 3.6-liter V8 which graced the DTM (Deutsche Tourenwagen Masters) in 1991. That season, it took four victories overall and carried Frank Biela to the drivers’ title. About the Model • This is a 1/10 R/C model assembly kit. • The powerful, imposing body is molded accurately in lightweight and durable polycarbonate. • Stickers are included to recreate the markings for the no.45 car driven by 1991 champion Frank Biela. Masking stickers will aid in the paint job. • Two-piece mesh wheels (Item 50548 design) have silver color rims and gold color spokes. They are paired with racing slick tires. • The TT-02 chassis is an adaptable and balanced design with excellent stability, plus features such as identical suspension arm and upright components for ease of assembly. • 4-bevel differential gears and 4-wheel double wishbone suspension make for a smooth ride. • A plethora of Hop-Up Option parts is available to tune the TT-02 chassis to your needs.

Plus
1:10 RC MB 190E debis Zakspeed TT-01E

Modèles sur piste RC

1:10 RC MB 190E debis Zakspeed TT-01E

€128.00

Art.No .: 300058656 Item description: 1:10 RC MB 190E debis Zakspeed TT-01E The Mercedes-Benz 190E in the version "debis" drove in the 90s in the German DTM racing series. The 1/10 scale TAMIYA model on the TT-01E chassis has a powerful torque-tuned electric motor and four-wheel drive. This combination ensures fast and uncomplicated driving pleasure. The robust and detailed polycarbonate body including decal sheet and the electronic speed controller are perfect for RC hobbyists.   Warning! Not suitable for children under 14 years.

Plus
1:10 RC Neo Scorcher (TT-02B)

Buggys RC

1:10 RC Neo Scorcher (TT-02B)

€133.00

Article number: 300058568 Product: 1:10 RC Neo Scorcher (TT-02B) The Scorcher, a popular and speedy 4WD racing buggy from the late-1980s Tamiya line-up, is back, with a new name and updated body! Made from durable polycarbonate and featuring a stylish large rear wing, the body design drew heavily upon the original Scorcher for inspiration, and can be decorated with the minimum of fuss, thanks to the large stickers included. It runs on the easy-assembly shaft-driven 4WD TT-02B, and marries the chassis' controllability with square spike tires for superior grip on rough surfaces. This off-road veteran is back with new features to scorch your rivals! The shaft-driven 4WD TT-02B buggy chassis uses a skid-shaped frame. Its suspension setup uses 4-wheel independent double wishbone suspension with long arms, plus CVA shock units, giving the car assured handling, while L/R suspension arms and uprights are identical to facilitate hassle-free assembly. F/R gearboxes include 4-bevel differentials for smooth operation, and are sealed to ensure that dust can't get inside. The top can be removed simply by loosening 4 screws, making maintenance a breeze. 4 different gear ratios can be applied with the use of 3 separately-sold types of pinion gears, allowing you to match the characteristics of your car setup to the conditions at any given time. Of course, this off-road chassis also includes receiver case and motor cover to protect them from dirt and debris thrown up off of the track.   Warning! Not suitable for children under 14 years.

Plus
1:10 RC Porsche 911 Carrera RSR (TT-02)

Modèles sur piste RC

1:10 RC Porsche 911 Carrera RSR (TT-02)

€152.00

Article number: 300058571 Product: 1:10 RC Porsche 911 Carrera RSR (TT-02) The Porsche 911 Carrera RSR joins the rapidly-expanding TT-02 chassis line-up. It is a legendary Group 4 car which had a body weighing just 900kg with a 300hp-plus horizontally opposed 6-cylinder engine, and still holds a place in fans’ hearts today thanks to its exploits with racing teams the world over. In 1973, the year of its release, it won the European GT Championship, plus the renowned 24 Hours of Daytona and 12 Hours of Sebring races. The works prototype in predominantly silver livery with the Martini stripe also took the checkered flag in the famed Targa Florio race. About the Model • This is a 1/10 scale R/C assembly kit. • The model’s polycarbonate body accurately recreates that of the real car. Rear wing is integrated with body. • Separate parts are included to depict side mirror. • The shaft driven 4WD TT-02 is a highly versatile and easy-to-maintain chassis. • A wide range of option parts are becoming available to tune and customize TT-02 chassis machines. • The kit includes decorative and masking stickers. • EXPORT VERSION ONLY includes RS-540 Torque-Tuned Motor.   Warning! Not suitable for children under 14 years.

Plus
1:10 RC Unimog 406 Ser.900 CR-01

Modèles hors piste RC

1:10 RC Unimog 406 Ser.900 CR-01

€399.00

Article number: 300058414 Product: 1/10 RC Unimog 406 Ser.900 CR-01 MB Unimog 406 Ser.U900 CR01 Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

Plus
1:10 RC X-SA Hornet

Buggys RC

1:10 RC X-SA Hornet

€166.00

Article number: 300046703 Product: 1:10 RC X-SA Hornet Another true Tamiya classic joins the new X-SA series in the form of the Hornet, a childhood dream for many early R/C fans and still a highly popular model in the modern day. About the Model • This is a 1/10 scale finished R/C model. Length: 400mm, width: 230mm, height: 150mm. Wheelbase: 251mm. • Finished polycarbonate body and wing are pre-painted in black, and have the iconic Hornet livery stickers applied. • The chassis comes ready-assembled. • Independent swing axle front suspension utilizes friction dampers, while rolling rigid axle rear suspension is fitted with oil filled dampers. • Sealed rear gearbox protects diff gear during off-road running. • Requires separately sold R/C equipment, battery pack and charger.

Plus
1:100 Space Shuttle Atlantis

Échelle 1:100

1:100 Space Shuttle Atlantis

€59.99

Article number: 300060402 Product: 1/100 Space Shuttle Atlantis NASA's space shuttle was first launched on April 12, 1981 and the fleet has accomplished numerous historic missions throughout their 30 years of service. The spacecraft conducted the latest research and played an important role in building the largest structure in space thus far, the International Space Station. The final space shuttle mission ended on July 21, 2011 with the flight of the Atlantis and the shuttle fleet is now destined for public display in museums across the United States.

Plus
1:12  Yamaha XV1600 Road Star 1999

Échelle 1:12

1:12 Yamaha XV1600 Road Star 1999

€38.99

Article number: 300014080 Product: 1:12 Yamaha XV1600 Road Star 1999 About the Yamaha XV1600 Road Star Yamaha shocked the motorcycle world once again when it brought out the XV1600 Road Star, a unique combination of traditional cruiser design with state of the art technology. The construction of the machine is focused on providing the maximum amount of comfort, performance and style to today's large capacity cruiser customer. The XV1600 is powered by a huge 1,600cc air-cooled V-twin pushrod engine housed in an ultra-long and low chassis. This OHV engine pumps out 46.3kW (62.6PS) at 4,000rpm and features an electric starter. The front suspension of this machine consists of telescopic forks, while the rear consists of a swinging arm monocross. This gorgeous motorcycle was voted "1999 Cruiser Bike of the Year" by Cruising Rider Magazine. About the model - Tamiya has recreated the Road Star in stunning detail as their latest addition to the 1/12 Motorcycle Series. - Overall length: 208mm, overall width 89mm, overall height: 100mm. - Enjoy the fascinating assembly incorporating real screws and two kinds of metal plated parts. The delicate fins of the air-cooled engine, spoke wheels and the slender brake and clutch lines all add to the realism of this motorcycle masterpiece. - Kit comes with two kinds of tank emblems (one for the Japanese and American "Road Star" and one for the "Wild Star" as it is called in Europe. - Various decals for stripes and meters are also included in this authentic kit. - Transparent display stand also included.

Plus
1:12 Yamaha YZF-R1 1000ccm 1997 Street

Échelle 1:12

1:12 Yamaha YZF-R1 1000ccm 1997 Street

€29.99

Article number: 300014073 Product: 1:12 Yamaha YZF-R1 1000ccm 1997 Street At the Motorcycle Show held in Milan, Italy, in September of 1997, the Yamaha YZF-R1 supersport motorcycle made its debut. Sporting a powerful 1000cc engine, it has the compact construction of a 400cc bike. The YZF-R1 was developed for maximum possible cornering ability in a production motorcycle. With a 1000cc water-cooled, four stroke, 4-cylinder, 5-valve engine and adopting a redesigned EXUP exhaust system, it pumps out 150hp of high-intensity power. Subtle throttle control makes both superb acceleration response and rhythmic cornering a reality. The Deltabox II aluminum frame was sought after not only for its rigidity, but more so for its moderate flexibility during tight cornering. With the addition of a long span aluminum swing arm, high control ability has been achieved. By adopting an upside-down front fork, stroke distance has been increased and traction heightened. Boasting a sharp form with multi-reflector lights, the YZF-R1 has been given an unprecedented style. From the contact points between the rider and motorcycle, right down to the material used in the seat and tank, the YZF-R1 has been thoroughly studied. Of course, the abundance of high precision and high quality parts goes without saying. Designed to cruise at high speeds on winding roads, the YZF-R1 shatters expectations about large exhaust engine motorcycles. Yamaha has expanded the possibilities of a 1000cc bike.

Plus
1:14 RC King Hauler Black Edition

Camions RC

1:14 RC King Hauler Black Edition

€437.00

Article number: 300056336 Product: 1/14 RC King Hauler Black Edition This is a special edition of Item 56301 King Hauler, which was the first in the Tamiya series of 1/14 scale Tractor Trucks. The King Hauler was first introduced in 1993 and has been a favorite among R/C enthusiasts for many years. The body parts of this edition kit come pre-painted in Metallic Black straight from the factory floor. Tamiya's Tractor Truck Series come with authentic suspension with leaf springs. Power is provided by a 540-size front mounted motor, and 3-speed gear changes are possible via a 4-channel transmitter. Tamiya's Tractor Trucks may be connected to separately-sold semi-trailers.     Warning! Not suitable for children under 14 years.

Plus
1:14 RC King Hauler Kit

Camions RC

1:14 RC King Hauler Kit

€428.00

Article number: 300156301 Product: 1/14 RC US Truck King Hauler Kit The Mighty King Hauler resembles the classic conventional American tractor truck. Powered by it's 540 motor driven with a 3-speed transmission, which has no problem turning the dual rear axles. Each axle is supported with leaf spring and shocks. The metal C-Channel ladder frame, keeps the power to the pavement. Whether by itself or coupled to an optional trailer, the King Hauler is sure to turn heads. RC Truck King Hauler   Warning! Not suitable for children under 14 years.

Plus
1:14 RC M-B Race Truck MP4 MB MSP TT-01E

Modèles sur piste RC

1:14 RC M-B Race Truck MP4 MB MSP TT-01E

€152.00

Article number: 300058683 Product: 1:14 RC M-B Race Truck Actros MP4 TT-01E The Tamiya line of racing truck models welcomes a newcomer in the form of the Actros raced in the 2019 ETRC, and which carried the team to 4th place on the year, with veteran Hungarian driver Norbert Kiss 6th overall in the drivers’ standings. The model is based upon the proven shaftdriven 4WD of the TT-01 Type-E chassis. About the Model • This is a 1/14 scale R/C model assembly kit. Length: 441mm, width: 188mm. Wheelbase: 257mm. • Please note that in Japan, this model will have a pre-painted body with pre-cut wheel arches. • The racing Actros form is captured by a brand new three-part polycarbonate body with components for body, cab and coupler. • Separately molded plastic parts depict side mirrors, front and rear light cases, plus the grille emblem. • Includes stickers recreating the sponsors and livery. • Silver color molded wheels and 70mm diameter radial tires are specifically designed for racing truck models. • The TT-01 Type-E chassis features shaft-driven 4WD with easy handling Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

Plus
1:14 RC Scania R470 Silver Edition

Camions RC

1:14 RC Scania R470 Silver Edition

€409.00

Article number: 300056364 Product: 1:14 RC Scania R470 Silver Edition This is a special edition of the R/C Scania R470 truck (original: Item 56318), the stylish 4x2 model that depicts a vehicle belonging to Scania’s International Truck of the Year 2005 award-winning R Series. It is a great option for those without the time or confidence to apply a paint job to their kit, as cab parts come pre-painted in TS-17 Gloss aluminum, and given a urethane coating for a beautiful, lasting finish. About the Model • This is a 1/14 scale R/C model assembly kit. Length: 452mm, width: 187mm, height: 293mm. • The classic form of the R470 is recreated accurately, complete with cab that tilts forward separately from fenders, just like on the full-sized truck. Cab, F, H, K, and M parts are molded in gray and pre-painted in Gloss aluminum (TS-17), with a urethane top coat for a stunning finish. • Interior features such as seat and dashboard are depicted. • 2-axle chassis utilizes ladder frame with aluminum side channels and resin cross members. Realistic drivetrain has a front mounted motor powering twin rear axles. • 3-speed transmission can be controlled via 4ch R/C transmitter. • Highly realistic suspension employs metal leaf springs. • Coupler is included to enable connection with any currently available Tamiya 1/14 scale trailer. • Compatible with a range of tractor truck option parts (TROP). Use with Multi-Function Control Unit MFC-03 (Item 56523) (or MFC-01, Item 56511) for realistic lights and sounds.

Plus
1:14 RC US Fuel Tank Trailer 2Axle Galat

Camions RC

1:14 RC US Fuel Tank Trailer 2Axle Galat

€409.00

Article number: 300056333 Product: 1/14 US Fuel Tank Trailer 2Axle "Gallant Eagle" The Tamiya 1/14 scale Fuel Tank Trailer has been revamped! This fuel tank trailer features a newly-designed original and imagined livery that was inspired by fuel tank trailers seen in the United States. The chassis and tank parts are based on Item 56303.   Warning! Not suitable for children under 14 years.

Plus
1:20 Seat Belt Set A

Échelle 1:20

1:20 Seat Belt Set A

€5.99

Article number: 300012637 Product: 1/20 Seat Belt Set A Add greater realism to your 1/20 scale Grand Prix model with this Detail-Up parts set. This set is perfect for models depicted from the early 1970's to the early 1980's. 1:20

Plus
60 de 2945 Article