5 22

Modèles en plastique


Trier selon:

Meilleures ventes
  • Meilleures ventes
  • Nouveautés
  • Prix croissant
  • Prix décroissant
Filtrer

Filtrer
Prix
Catégorie
Marque
Échelle
1:35 WWII Fig-Set Ger.Front-Line Sold(5)

Échelle 1:35

1:35 WWII Fig-Set Ger.Front-Line Sold(5)

€11.49

Article number: 300035196 Product: 1:35 Fig-Set Ger. Front-Line Soldiers(5) During WWII, German soldiers belonging to armored divisions wore camouflage smocks and M44 field uniforms. This is a plastic assembly kit of five figures which features a noncommissioned officer and a soldier in charging poses armed with a panzerfaust and a MP44 assault rifle, a soldier shooting an MG42 machine gun from his waist, a soldier throwing a hand grenade, and another noncommissioned officer firing his MP44 from his knees. Weapons and accessory parts such as water bottles and gas mask cases all have a sharp detailed finish. Why not display this set with a German armored vehicle model such as a Sd.Kfz. 251/1?   Warning! Not suitable for children under 14 years.

Plus
1/24 TS050 HYBRID 2019

Échelle 1:24

1/24 TS050 HYBRID 2019

€49.99

Article number: 300025421 Product: 1/24 TS050 HYBRID 2019 About the model • This is a 1/24 scale plastic model assembly kit. Length: 194mm, width: 79mm, height: 44mm. • The form of the 2018/2019 season version of the TS050 Hybrid is captured with superb accuracy: updated aerodynamics components (both exterior and interior), longer front fenders, and tweaked diffuser design. • A busy interior features depictions of the driver seat, lithium-ion battery and more. • Metal-plated part is used to recreate the silver section on the top of the cockpit. • Also included are updated decals for the numerous sponsor logos on the 2019 number 7 and 8 cars as they appeared in rounds 7 and 8 of their season, plus updated masking stickers for use in the paint job. • Dedicated metal transfers recreate side mirror surfaces and headlight sections.

Plus
1/35 38(t) Ausf.E/F

Échelle 1:35

1/35 38(t) Ausf.E/F

€32.99

Article number: 300035369 Product: 1/35 38(t) Ausf.E/F A brand new face is welcomed to the 1/35 Military Miniatures Series with the addition of the 38(t)! This subject in fact started life as a light tank developed for Czechoslovakia, but was adopted and renamed 38(t) by German forces after their occupation of the country in 1939. It was equipped with a 3.7cm main gun and could reach speeds of up to 42km/h powered by the 125hp engine. A number of variants were produced, of which the Ausf. E/F 38(t)s were manufactured over a one-year period from November 1940; they featured improved armor and were thrown into the conflict with Soviet forces after the start of Operation Barbarossa. • This is a 1/35 scale plastic model assembly kit. • Tamiya designers studied a real 38(t) in the Kubinka Tank Museum, getting the data to make this highlyaccurate model with detail right down to the rivets. • The turret front left sight moves in conjunction with the 3.7cm gun. • Features a realistic recreation of the suspension with large road wheels and upper return rollers. • Assembly type tracks give natural recreation of the upper run ‘sag.’. They feature single piece straight sections. • The kit comes with a figure recreating a commander for placement in the cupola hatch. • Includes two marking options for vehicles with units on the Eastern Front in 1941.   Warning! Not suitable for children under 14 years.

Plus
1/48 Luftwaffe &Kettenkraftrad

Échelle 1:48

1/48 Luftwaffe &Kettenkraftrad

€24.49

Article number: 300032412 Product: 1/48 Luftwaffe & Kettenkraftrad This product takes a modern figure set from ICM and powers it up by adding Tamiya accessories and instructions, in a new Tamiya package! It recreates crew from the Luftwaffe, the famed WWII German air arm which of course included not only pilots but also a whole range of recruits in supporting roles. • This is a 1/48 scale plastic model assembly kit. • Comes with parts for 5 figures: 2 pilots, 2 mechanics (one carrying a bomb, one spray-painting) and a sentry. • Realistic poses give the figures a highly authentic air. Winter gear such as the fur collared pilot’s jackets, heavy sentry’s coat, and winter boots are depicted with aplomb. • Also features a number of accessories such as tools and a sentry post. • Includes Tamiya parts to recreate the Kettenkraftrad and accessories such as oil drums, jerry cans, folded sheets, buckets and more. • Why not pair with Tamiya WWII aircraft models in 1/48 for a detailed and vivid diorama? • Figure parts are a product of ICM.

Plus
1:12 Ducati Desmosedici #65 MotoGP´03

Échelle 1:12

1:12 Ducati Desmosedici #65 MotoGP´03

€48.99

Article number: 300014101 Product: 1:12 Ducati Desmosedici #65 MotoGP´03 About the Model Detailed 1/12 assembly model kit of the 2004 Ducati Desmosedici ★Model accurately depicts trademark Ducati style, such as truss-frame and V4 engine with rear suspension swing arm directly attached to crank case. ★Accelerator, clutch and brake wiring masterfully depicted with plastic tubing. ★Synthetic rubber tires look and feel like authentic racing slick tires ★Side and seat cowling can be removed after assembly allowing full display of engine ★Due to sponsor's request, white marking decals are not included with this kit.

Plus
1:24 Porsche 911 GT1 LeMans `96 Factory

Échelle 1:24

1:24 Porsche 911 GT1 LeMans `96 Factory

€33.99

Article number: 300024186 Product: 1/24 Porsche 911 GT1 LeMans `96 Factory ★This is a plastic model assembly kit depicting the car which competed in the 1996 running of the 24 Hours of Le Mans. ★The low, side form of the car is recreated in style, with depictions of the midship twin turbo engine and suspension. ★Features a realistic interior with roll cage, plus a removable rear cowl component. ★Decals are included to recreate the livery.

Plus
1:35 WWII Fig.-Set Ger.Mortar-Troop (4)

Échelle 1:35

1:35 WWII Fig.-Set Ger.Mortar-Troop (4)

€9.29

Article number: 300035193 Product: 1:35 Fig.-Set Ger.Mortar-Troop (4) During WWII, the German infantry were issued with the precise 8cm GrW 34 mortar. This plastic assembly model kit realistically depicts a German infantry mortar team about to fire the weapon with two soldiers holding it down, one loading it, and one yelling "fire!" The 8cm GrW 34 mortar can also be depicted in an unassembled state for when it is not in use. Parts to depict wooden and metal ammunition cases (two each), plus mortar shells further enrich the kit.   Warning! Not suitable for children under 14 years.

Plus
1:35 WWII Ger.7,5cm An.Tank Gun(PAK) (3)

Échelle 1:35

1:35 WWII Ger.7,5cm An.Tank Gun(PAK) (3)

€7.39

Article number: 300035047 Product: 1:35 Ger. 7,5cm Anti Tank Gun(PAK) (3) This is a 1/35 scale plastic model assembly kit depicting the L/46 75mm Pak40 anti-tank gun used by German forces in WWII. ★The imposing form of the long-barrelled gun is captured in style, down to details such as sight and handle. ★Barrel offers elevation and traverse, while the breech also slides and the carriage can be moved as well. ★Comes with three figures, plus accessories such as amom cases, shells and more.   Warning! Not suitable for children under 14 years.

Plus
1:35 WWII Ger.Flak 8,8 w/Motorcycle (9)

Échelle 1:35

1:35 WWII Ger.Flak 8,8 w/Motorcycle (9)

€30.99

Article number: 300035017 Product: 1/35 WWII Ger.Flak 8,8 w/Motorcycle (9) This famous weapon is well known for its role in World War II. It did, in fact, have its origins during the first World War, when guns of this calibre were used in an anti aircraft role.

Plus
1:35 WWII Ger.SdKfz.171 Panther A (2)

Échelle 1:35

1:35 WWII Ger.SdKfz.171 Panther A (2)

€20.99

Article number: 300035065 Product: 1/35 WWII Dt. SdKfz.171 Panther A (2) In the beginning of 1942, in order to fight against the T-34, the German military ordered a new tank from Dymler-Benz and M.A.N. companies with the following specifications: Weight- 35 tons; speed- 60 km/h; armament 75mm long gun and armour, 60mm thick in front hull, 35mm thick in the rear and 100 mm at the front of the gun turret. Lastly, it was specified that the tank be equipped with a Maiback HL210, water-cooled, V-type 12 cylinder engine. In May of the same year, M.A.N.'s model was chosen without waiting for completion of a prototype tank. However, there were 2 important modifications. First, in order to meet the military's demand, considerably more than the original 35 ton weight was needed. Second, the military ordered a change in the thickness of the frontal armour from 60mm to 80mm. Because of these changes, the engine type had to be chanded from HL210 to HL230. Then, in order to accommodate this engine, a much better gear was needed, but mass production began without this last change, which resulted in frequent gear malfunctions and related trouble. This became the Panther's greatest defect. In the same year, Dymler-Benz and Henschel were ordered to produce the Panther. Therefore, production was greatly increased and a total of 6283 Panther Tanks were produced, second only to P2KW-4 in number. The first mass produced Panther type D was not equipped with a machine gun but after the experience of close battle. A 7.92mm MG 34 was added to the Panther's right front hull armament beginning with its type A. The special feature of the Panther was the left and right driving mechanism. This created an interchangeability of movements, using the torsion bar system. By 1944, the Panther was further improved from Type A to Type G with a change in its side shape. The Panther continued its activities against the Allied Forces th Ger. Panther Med. Tank

Plus
1:350 WWII Jp. Submarine i-400

Échelle 1:350

1:350 WWII Jp. Submarine i-400

€72.99

Article number: 300078019 Product: 1/350 WWII Jp. Submarine i-400iece construction with upper and lower hull sections. Created as part of a plan to attack major cities in the United States and the Panama Canal, the three I-400 class large aircraft carrier submarines were quite technologically advanced. Featuring an extremely long range and heavily armed with both torpedoes and deck guns, they were also equipped with catapults to launch their three Aichi M6A Seiran aircraft. While on their way to attack the Panama Canal, the submarines were ordered to attack the Allied naval base at Ulithi instead. However, hostilities ended before any attack could be launched. After surrendering to U.S. forces, the I-400 was eventually sailed to Hawaii, where they were studied and then scuttled. - High-quality 1/350 scale assembly kit model of the I-400 submarine. - Accurately reproduced hull features two-p - Hangar hatch may be modeled in both open and closed positions for increased display possibilities. - Details such as crane arm and antenna array realistically depicted with precision-made photo-etched parts. - Metal parts for propeller screw shafts provide additional detail. - Parts are included to allow depiction of the Seiran aircraft with wings in both extended and folded positions.   Furthermore, photo-etched parts are used for aircraft propellers and dollies. - Conveniently includes special display base.   Warning! Not suitable for children under 14 years.

Plus
1/12 1199 Panigale S Tricolore

Échelle 1:12

1/12 1199 Panigale S Tricolore

€49.99

Article number: 300014132 Product: 1/12 1199 Panigale S Tricolore This scale model assembly kit depicts the Tricolore version of the thoroughbred Ducati 1199 Panigale S. As its name suggests, the Tricolore came in a 3-color scheme: red, white, and green to match the colors of the famous tricolore italiano national flag, in commemoration of the 150th anniversary of Italian reunification. It shared most of the base bike’s revolutionary design, including the 1,198cc L-Twin engine integrated into the monocoque frame and directly connected to the swing arm, damper unit, and so on.   Warning! Not suitable for children under 14 years.

Plus
1/12 1199 Panigale S Tricolore

Échelle 1:12

1/12 1199 Panigale S Tricolore

€49.99

Article number: 300114132 Product: 1/12 1199 Panigale S Tricolore This scale model assembly kit depicts the Tricolore version of the thoroughbred Ducati 1199 Panigale S. As its name suggests, the Tricolore came in a 3-color scheme: red, white, and green to match the colors of the famous tricolore italiano national flag, in commemoration of the 150th anniversary of Italian reunification. It shared most of the base bike’s revolutionary design, including the 1,198cc L-Twin engine integrated into the monocoque frame and directly connected to the swing arm, damper unit, and so on.

Plus
1/12 Kawasaki Ninja H2R

Échelle 1:12

1/12 Kawasaki Ninja H2R

€54.99

Article number: 300014131 Product: 1:12 Kawasaki NINJA H2R This 1/12 scale assembly model kit recreates Kawasaki's hyper-powerful Ninja H2R bike, a track-only monster that the famed Japanese manufacturer announced in 2015. The Ninja H2R was developed with input from many of the companies in the larger Kawasaki Heavy Industry group, and its name is a composite of two legendary Kawasaki bikes: the famed Ninja and the H2R. The Ninja H2R not only looks the part with a combination of bare carbon fiber and exquisite mirrored finish black chrome parts, it also has mind-blowing specs. It generates a hair-raising 300hp-plus from its supercharged 998cc inline-4, which it translates into other-worldly acceleration. It is also chock-full of up-to-date electronics for the track: traction control, engine brake control and more.

Plus
1/12 Repsol Honda RC213V '14

Échelle 1:12

1/12 Repsol Honda RC213V '14

€52.99

Article number: 300014130 Product: 1/12 Repsol Honda RC213V '14 This model depicts the RC213V run by the factory-works Repsol Honda team in 2014 MotoGP. It was a momentous season for the team and for young sensation Marc Marquez. Marquez's 2014 season was sublime as he absolutely dominated with 13 wins and contributed to the Riders', Constructors' and Team Championships. The RC213V debuted in 2012 with new engine size regulations stipulating a maximum of 1,000cc. It features an aluminum double-tube frame and powerful 1,000cc Honda 4-stroke V4 with pneumatic valve system. The seamless transmission saves valuable power during shifts, while other hi-tech features include traction control, an anti-wheelie system, and engine braking control.   Warning! Not suitable for children under 14 years.

Plus
1/12 Street Rider

Échelle 1:12

1/12 Street Rider

€16.79

Article number: 300014137 Product: 1/12 Street Rider The 1/12 Motorcycle Series welcomes a brand new, original figure in the form of the Street Rider, a male figure in casual bike gear which is perfectly suited to display with our models in the series, particularly street bikes. It features a number of options with regard to helmet, pose and eyewear. Take this chance to make a little diorama from your latest motorcycle masterpiece! About the Model • This is a 1/12 scale plastic model assembly kit. • The latest 3D scanning techniques ensure that this is a    finely molded figure with excellent detail including natural    rendering of folds and creases on the clothing. • Included are parts to make either of two different options:    i) the rider helmeted and pulling on his gloves, ready to mount    the bike; or    ii) the rider having just got off the bike, helmet in hand and with a    wooly hat on his head. • Features parts to create either half or three-quarter helmet. • Optional sunglasses and helmet visor are also included. • Comes with a screw-affixed base for stable display.   Warning! Not suitable for children under 14 years.

Plus
1/24 Ford GT

Échelle 1:24

1/24 Ford GT

€49.99

Article number: 300024346 Product: 1/24 Ford GT Honed to Perfection Ford’s GT40 was a motorsports legend which dominated the prestigious 24 Hours of Le Mans race with four back-to-back victories between 1966 and 1969. Nearly 50 years on, and 2015 welcomed a newcomer with the legendary GT name, a revolutionary design upon which Ford have unleashed their passion for innovation: the Ford GT. It is based around a carbon fiber monocoque and endowed with a 647hp 3.5-liter EcoBoost V6 engine plus a 7-speed dual-clutch transmission, not to mention an aerodynamically-honed carbon fiber body: the result is a top speed of a cool 347km/h. A competition model took a magnificent class victory in the 2016 running of the 24 Hours of Le Mans. About the Model ★This is a 1/24 scale plastic model assembly kit. Length: 200mm, width; 94mm, height: 46mm. ★Refined aerodynamic form is captured with aplomb, with depictions of buttresses, door-side air tunnels and underside design. ★Body rear parts breakdown closely follows that of the actual car for super realism. ★Metal-plated wheels and oil tank depiction give an extra layer of realism. ★Shoulder sections and passenger seat dashboard are separate parts. ★Realistic soft resin tires.   Warning! Not suitable for children under 14 years.

Plus
1/24 Mazda MX-5

Échelle 1:24

1/24 Mazda MX-5

€43.49

Article number: 300024342 Product: 1/24 Mazda MX-5 2015 saw the debut of the 4th generation Mazda Roadster (MX-5), the iconic car with a heritage dating back to 1989. This dynamic lightweight car was made to amplify the thrill of driving, with a punchy 1.5-liter (2.0-liter in North America) engine and 6-speed transmission, while including modern must-haves such as advanced safety equipment. Tamiya has faithfully captured the NEW roadster in 1/24 scale! Details include; option to choose left or right hand drive, soft top in folded position and highly detailed interior.

Plus
1/24 Mazda MX-5 RF

Échelle 1:24

1/24 Mazda MX-5 RF

€38.99

Article number: 300024353 Product: 1/24 Mazda MX-5 RF Tamiya is delighted to announce a new stablemate for the popular MX-5 (also known as the Miata MX-5 in the US and Roadster in Japan) model Item 24342! This kit recreates the RF model that was originally announced by Mazda in 2016: the initials stand for Retractable Fastback, as the car features a sleek fastback hard-top design with innovative retractable roof. In fact, the actual car's three-piece roof opens and closes in just thirteen seconds, and all at the push of a single button. It also features tweaks to its chassis and suspension to accommodate the heavier top section, while retaining all of Mazda’s vaunted safety features. About the Model • This is a 1/24 scale plastic model assembly kit. Length: 164mm, width: 80mm. • The kit depicts the 2017 model MX-5 RF, complete with options available on top grade models in the Japan market such as Recaro seats, and BBS wheels. • Modelers can choose to assemble the kit as Japanese, US, UK or European market spec, and have the option of depicting the hard top up or down, thanks to new roof and rear/side window parts.

Plus
1/24 Mercedes-AMG GT3

Échelle 1:24

1/24 Mercedes-AMG GT3

€59.99

Article number: 300024345 Product: 1:24 Mercedes-AMG GT3 #1 This scale model assembly kit recreates the 2016 Mercedes-AMG GT3 race car. It is a GT3 class spec customer sports car that was converted from the AMG GT road car by the Mercedes-AMG high performance division. The full-size racer features a reliable and powerful 6.3-liter naturally aspirated V8 engine harnessing 558hp. Its carbon fiber body overhauls the road car version and has a prominent grille inspired by the classic 300 SL. The race car is also fitted with racing essentials such as a large rear wing, air intakes, splitter, canards and diffusers contributing to its aerodynamics. All of these details are expertly detailed in the model kit to give the modeler the most accurate parts to finish the model.   Warning! Not suitable for children under 14 years.

Plus
1/35 6-Wheeled Sd.Kfz. 231

Échelle 1:35

1/35 6-Wheeled Sd.Kfz. 231

€47.99

Article number: 300037024 Product: 1:35 SdKfz.231 6-Rad Panzerspähwagen This model takes the classic Italeri model of the Sd.Kfz. 232 and transforms it into the frame antenna-less Sd.Kfz. 231, with new and updated parts from the Italian maker, plus Tamiya figure, metal gun barrel, decals and instruction manual, all packaged in a Tamiya box! The 6-wheeled Sd.Kfz. armored cars were produced from the early 1930s as German forces rearmed and mechanized. Based on a civilian vehicle chassis, they utilized sloped armor and a 20mm cannon. Even though these vehicles were replaced by 8-wheeled counterparts during that time, they still saw action in Poland and France during WWII.

Plus
1/35 Ger.Pioneer & Goliath Set

Échelle 1:35

1/35 Ger.Pioneer & Goliath Set

€17.79

Article number: 300035357 Product: 1/35 Ger.Pioneer & Goliath Set This 1/35 scale model recreates the Goliath. It was a diminutive tracked vehicle about 1.5m long that could carry up to 60kg of light explosives and was remotely controlled via 3 cables that spooled out of its rear. Some 7,564 were produced in all, split between 12V battery and gas engine-powered variants. They were largely deployed by assault pioneer (Sturmpionier) units, and were hoped to give the advantage of surprise. They were used on all fronts including German counters to the allied invasions in Normandy.

Plus
1/35 Wespe Italian Front

Échelle 1:35

1/35 Wespe Italian Front

€39.99

Article number: 300035358 Product: 1:35 Panzerhaubitz Wespe Italien. Front This model faithfully recreates the German Self-Propelled Howitzer Wespe. It is a classic model from within the Tamiya catalogue, but this version includes updated parts and new marking options for vehicles that fought on the Italian front. Originally designed as a stopgap, with a production run of 676, this Pz.Kpfw.II chassis-based howitzer exceeded German expectations. Intended mainly for infantry support, the Pz.Kpfw.II’s moving turret was replaced with a boxy stationary superstructure equipped with the Type 18/2 10.5cm L/28 howitzer. While the crew of 5 were not blessed with overwhelming protection, their vehicle was a mobile threat to Allied forces nonetheless.

Plus
1/48 P-38 F/G Lightning

Échelle 1:48

1/48 P-38 F/G Lightning

€69.99

Article number: 300061120 Product: 1:48 US P-38 F/G Lightning Lighting Strikes! The P-38 Lightning was developed by Lockheed in response to a 1937 proposal from the United States Army Air Corps. Its twin V12 engines were housed one each in twin booms that stretched back to the tailplane, flanking a central nacelle containing the cockpit and weaponry. A combination of superb range, firepower and carrying capacity ensured that the P-38 was a superior fighter-bomber, and it made a considerable impact after joining fighting in Europe in 1942. It was also active in the Pacific War from late that year, its escapades including the shooting down of Japanese Admiral Isoroku Yamamoto in 1943 that provided a significant morale boost for the Allied cause. About the Model ★This is a 1/48 scale plastic model assembly kit. Length: 240mm, width: 330mm. ★Exhaustive studies of actual P-38 aircraft enabled this precise recreation of the distinctive twin boom aircraft form, with particular highlights being early model slimline engine cowlings, wing shape and rounded canopy design. ★Integrated landing gear bay and wing spar parts ensure sturdy assembly and accurate recreation of angle. ★Choose between P-38F and P-38G canopy designs, with each able to be assembled open or closed. ★The detailed cockpit features recreations of the control wheel, bulletproof glass plate, rear-mounted radio equipment and more. ★One-piece tailplane horizontal stabilizer slides on and is secured by rudder components. ★Metallic finish decals are used on main and nose landing gear strut cylinders. ★The nose has depictions of four 12.7mm machine guns and the 20mm cannon. ★Weights are included to ensure correct balance of the model when on display. ★Comes with a seated pilot figure, two marking options and an informative background information leaflet in four languages.   Warning! Not suitable for children under 14 years.

Plus
1/6 Link-Type Motorcycle Chain

Échelle 1:6

1/6 Link-Type Motorcycle Chain

€42.99

Article number: 300012674 Product: 1/6 Link-Type Motorcycle Chain This assembly-type 1/6 scale chain is designed to go with the 1/6 scale Honda CRF1000L Africa Twin model kit. It promises to add an extra level of unbelievable detail to your masterpiece. •Includes individual assembly chain links consisting of individual plastic plates and metal spacers. •The completed chain will fit neatly onto the drive sprocket in Item 16042 Honda CRF1000L Africa Twin. •Includes a handy jig which aids construction. •Parts included in Item 16042 allow adjustment of the chain tension when it is fitted to the model.

Plus
1/72 Bf-109 G-6 Messerschmitt

Échelle 1:72

1/72 Bf-109 G-6 Messerschmitt

€24.49

Article number: 300060790 Product: 1/72 Bf109 G-6 In great news for modelers in the compact 1/72 scale, the "Gustav" is to be released as a Tamiya kit! With over 30,000 produced, the Messerschmitt Bf109 is the most prolifically manufactured fighter in history; of its variants, the G-6 was the most numerous at 13,000 aircraft. In response to improving Allied foes in the air, Bf109 G aircraft had the more powerful DB605 engine, and from the G-6 were equipped with dual 13mm MG131 machine guns that required the distinctive bulges on either side of the cockpit cowling known as "Beule." Some were even given a 20mm cannon gondola under each wing for further improved firepower. The Bf109 G-6 was deployed on both the Western and Eastern fronts, in particular dominating Soviet adversaries as it continued in service through to the end of WWII. About the Model - This is a 1/72 scale plastic model assembly kit. - The striking, refined form of the G-6 variant Bf109 is captured, including depictions of the Beule bulges. - This product takes inspiration from the highly accurate 1/48 model (Item 61117). Please note that engine cowlings are depicted closed. - The cockpit is inserted after left and right fuselage halves have been put together. It has an accurate interior with streamlined assembly. - Canopy can be assembled in open or closed state. - Landing gear struts have a solid attachment point for accurate attachment angle and position. - Comes with optional drop tank parts. - 2 marking options are planned - JG51 (with distinctive eye marking on the Beule) and JG54. Detailed Plastic Kit   Warning! Not suitable for children under 14 years.

Plus
1:100 Space Shuttle Atlantis

Échelle 1:100

1:100 Space Shuttle Atlantis

€62.99

Article number: 300060402 Product: 1/100 Space Shuttle Atlantis NASA's space shuttle was first launched on April 12, 1981 and the fleet has accomplished numerous historic missions throughout their 30 years of service. The spacecraft conducted the latest research and played an important role in building the largest structure in space thus far, the International Space Station. The final space shuttle mission ended on July 21, 2011 with the flight of the Atlantis and the shuttle fleet is now destined for public display in museums across the United States.     Warning! Not suitable for children under 14 years.

Plus
1:12 Ducati 888 Superbike ´93

Échelle 1:12

1:12 Ducati 888 Superbike ´93

€29.99

Article number: 300014063 Product: 1:12 Ducati 888 Superbike ´93 About the Ducati 888 Superbike Racer On the 26th of September 1993, a young and inspiring motorcycle racer named Tetsuya Harada was adding the final touches to his machine at the Jarama racing circuit, just prior tot he last round of the season. This would make him the first Japanese World Champion since 1977. His closest rival, Loris Capirossi, was ahead in point standings going into this last race, but bad luck plagued him during the dynamic battle for the 250cc GP2 title. Although this was Harada's debut season for the World Grand Prix, he had been working closely with Yamaha for the last couple of seasons, perfecting the works TZM bike, which allowed him to win the 1992 All Japan Championship title. The 1993 Yamaha TZ250M used a 249cc liquid cooled V-twin cylinder engine capable of 94 horsepower. Its crankcase reed valve induction system was combined with an electronically controlled exhaust valve system. The highly sophisticated six-speed gear box used an electronic cut-out gear changing system that eliminated clutch operation and minimized racing stresses. This awesome powerplant was mounted on Yamaha's exceptionally rigid twin-spar box-section aluminum frame that was capable of head angle adjustments. The rear suspension was also of box-sectioned aluminum to withstand the enormous power and traction. The bike rides on Marchesini cast magnesium wheels matched to Dunlop radial tires. The superb stopping power was achieved by front Brembo and rear Nissin Brake systems.  

Plus
1:12 Honda CB 750F Custom Tuned

Échelle 1:12

1:12 Honda CB 750F Custom Tuned

€24.49

Plus
1:20 Lotus Type 79 1978

Échelle 1:20

1:20 Lotus Type 79 1978

€62.99

Art.Nr.: 300020060 Artikelbezeichnung: 1:20 Lotus Typ 79 1978 • 1/20 scale plastic assembly model kit of the Lotus type 79. • The front and rear upper cowls can be removed after assembly to view the engine and cockpit area. • The monocoque chassis, suspension, and engine have been precisely reproduced. • Synthetic rubber tires included. • Top quality decals to depict the Lotus seen at both British and German GP's, which did not feature JPS markings, are included. • Newly designed tires and metal funnel covers included. • Add further detail to your model with Item 12635 1/20 Lotus Type 79 1978 Photo-Etched Parts Set.

Plus
1:20 Seat Belt Set A

Échelle 1:20

1:20 Seat Belt Set A

€6.79

Article number: 300012637 Product: 1/20 Seat Belt Set A Add greater realism to your 1/20 scale Grand Prix model with this Detail-Up parts set. This set is perfect for models depicted from the early 1970's to the early 1980's. 1:20

Plus
1:24 Mercedes Benz SL300 Gullwing

Échelle 1:24

1:24 Mercedes Benz SL300 Gullwing

€55.99

Article number: 300024338 Product: 1:24 Mercedes Benz SL300 Gullwing The Mercedes-Benz 300SL joins the 1/24 Sports Car Series as it is considered an all-time classic in the automotive world. The real car began life as a prototype for the German motor giant’s works racing team, taking part in international races, and in 1954 a production version debuted at the International Motor Show in New York. Despite nominal road car status the 300SL was still a very racy vehicle and proved popular, particularly in the United States. It possessed a 3-liter engine (hence the 300 in its name), and a highly lightweight body (SL stands for Sport Leicht, lit. "light sports") with striking gull wing doors. 1,400 cars were produced by the end of its production run in May 1957. The Tamiya model kit captures the real life subject down to the working Gull-Wing doors and complex tubular space frame. Productdetails: - This is a 1/24 Scale plastic model assembly kit. - The elegant form of this classic is breathtakingly captured by the model, and includes opening engine hood and gull wing doors. The doors can be locked in open position using a small strut. - Opening the hood reveals the faithful depiction of the engine. Hood can also be locked in open position. - The complex tubular space frame – one of the signature points of the car – is elegant recreated. - Nylon mesh is included to recreate the front air intake - Numerous metal-plated parts recreate side bars, bumpers and more. - Comes with masking stickers for use when painting the model. - Metal transfers are included in the kit to depict mirror surfaces and emblems. - Features newly-designed tire parts.   Warning! Not suitable for children under 14 years.

Plus
1:24 NISMO Skyline GT-R Z-tune (R34)

Échelle 1:24

1:24 NISMO Skyline GT-R Z-tune (R34)

€35.99

Article number: 300024282 Product: 1/24 NISMO Skyline GT-R Z-tune (R34) Tamiya has created an all-new mold to produce the body for this 1/24 scale NISMO GT-R Ztune. JGTC Champion team NISMO has turned its skills towards producing the ultimate road car, and we thought it was only right to do it justice with a truly excellent model. About the GT-R Z-tune The NISMO team took a Nissan Skyline GT-R (R34) base and hand-built it into a totally customized supercar. The resulting GT-R Z-tune made a huge splash during its unveiling at the 2005 Tokyo Auto Salon. Upgrades to internal mechanics include the souped-up 2.8L twin turbo engine with 500hp output, Sachs special suspension system and brakes jointly designed with engineers from Brembo. The lightweight carbon body features front bumper spoiler, hood with louver, side skirt and rear underspoiler. Full of racing-spec parts while featuring excellent power and handling, NISMOs Z-tune has been called the ultimate road-going car, combining luxury with superior performance.

Plus
1:24 Volkswagen Beetle 1300 1966

Échelle 1:24

1:24 Volkswagen Beetle 1300 1966

€26.49

Article number: 300024136 Product: 1:24 Volkswagen Beetle 1300 1966 Even in this age of sophistication, the popularity of the Volkswagen "Beetle" has not diminished. The original design dates back to the 1930"s when Dr. Ferdinand Porsche provided the design framework for the "People"s Car." Today, with more than 20 million units produced, the Volkswagen Beetle has become a symbol of mass-produced motorization, with no other vehicle exceeding this figure. Built upon the sturdy platform chassis is the amazingly reliable air cooled, flat-four cylinder engine. Suspension is four wheel independent for crisp handling and driving comfort. Although the onset of the Second World War greatly hindered Volkswagen"s marketing opportunities, it made a superb comeback shortly following the conflict, under the skillful guidance of Heinrich Nordhoff. Throughout its production life, the Volkswagen was continuously improved to meet modern automobile standards. An enlarged powerplant displacement and better visibility are two of the notable changes that enabled the Beetle to set standards for the compact car market, decade after decade. The 1966 Volkswagen model is regarded as the classic Beetle, one that retains the most of the original design traits, and it has become a collector"s item. Even today, more than half a century later, watching a nimble street bug is still a pleasant sight to behold, and its unmistakable shape will likely delight generations to come. Volkswagen 1300 Beetle   Warning! Not suitable for children under 14 years.

Plus
1:32 A6M2b Zero Model 21 (Zecke)

Échelle 1:32

1:32 A6M2b Zero Model 21 (Zecke)

€122.99

Article number: 300060317 Product: 1:32 Mits.A6M2b ZERO Fighter 21 About the Mitsubishi A6M2b Zero Fighter Model 21 (Zeke) The Japanese Zero Fighter plane was widely feared and respected by friend, foe and all who came into contact with it. A triumph of aerodynamic engineering and military science, the Zero Model 21 served in the skies across East Asia during early stages of World War II, contributing immensely to the Japanese war effort. It remains today an enduring symbol of that fierce and globe-spanning conflict. About the model •1/32 scale assembly kit of the Model 21 Zero Fighter. Length: 283mm, Width: 375mm. •Accurately reproduced curved cowling and fuselage are modeled from slide molding to accurately depict rivets and surface texture. •Realistically replicated Nakajima "Sakae" type 12 engine features propeller reduction unit, exhaust pipe and other detailed parts. •Both folded and extended wing tips included and can be used interchangeably even after assembly. •Durable and precision detailed metal parts depict landing gear system and pitot tube. •Seat belt incorporates photo-etched parts for extra realism. •Retractable landing gears increase display possibilities, while allowing model to be easily stored in package after assembly. •Features movable landing gears, rudder and flaps. •Includes standing and seated pilot figures and seven types of markings for planes which participated in Pearl Harbor attack. •Includes parts to depict any variation of Mitsubishi and Nakajima-built Zero Model 21. •Comes with wheel chocks and access steps. Includes posable display stand. A6M2b Zero Model 21 (Zeke)

Plus
1:32 Supermarine Spitfire Mk.XVIe

Échelle 1:32

1:32 Supermarine Spitfire Mk.XVIe

€136.99

Article number: 300060321 Product: 1:32 Supermarine Spitfire Mk.XVIe A Case of a Good Bubble The legendary Supermarine Spitfire is often credited with saving England during WWII. Among its many variants was the Mk.XVI, which was a Mk.IX airframe that was powered by a Merlin 266 engine license-built by Packard Motor Car Company in the United States. Most Mk.XVIs featured the larger rudder and E Type wing with two 20mm cannons and two 12.7mm machine guns. With the introduction of the teardrop canopy, the rear upper fuel tank capacity was reduced to 33 gal. and that of the forward lower fuel tank was increased to 48 gal. to compensate. 1,054 Mk.XVIs were produced from September 1944 until July 1945. During the war, they were deployed on the European front and served as fighter-bombers. In the post-war period, the Mk.XVI was used by the RAF as well as the Belgian and Greek air forces until the early-1950s. About the Model 1/32 scale plastic assembly kit of the Spitfire Mk.XVIe. ★Overall Length: 302mm, Overall Width: 311mm. ★Distinctive features of the Mk.XVIe, including Packard Merlin 266 engine, E Type wing, teardrop canopy, and modified landing gear legs, are accurately reproduced. ★Canopy may be opened even after assembly. ★Features movable ailerons, rudder, and elevators. Flaps can be depicted in either up or down position. ★30 gallon drop tank, two 250lb bombs, and 3 types of markings included. ★Comes with 3 kinds of markings to depict the aircraft from Royal Air Force squadrons as well as the (Pilots) Refresher Flying Unit. ★2 pilot figures, 1 seated and 1 standing, are included.

Plus
1:35 Bundeswehr Leopard 1A4 (1)

Échelle 1:35

1:35 Bundeswehr Leopard 1A4 (1)

€22.49

Article number: 300035112 Product: 1:35 BW MBT Leopard 1A4 (1) This is a 1/35 scale plastic model assembly kit recreating the Leopard A4 which began production in 1974. ★From the spaced armor to the 105mm gun, the powerful form of the tank is captured in style. ★Notable details include the MG3 machine gun and searchlight. ★Comes with a commander figure to add even more detail to your finished model.   Warning! Not suitable for children under 14 years.

Plus
1:35 Bundeswehr SPz Marder 1A2 Milan (2)

Échelle 1:35

1:35 Bundeswehr SPz Marder 1A2 Milan (2)

€30.99

Article number: 300035162 Product: 1:35 BW SPz Marder 1A2 Milan (2) Still operational in the present day in spite of its having been introduced back in 1969, the Marder has proved a resilient and adaptable vehicle. This precision plastic model assembly kit recreates the 1977 vintage Marder 1A2 with MILAN anti-tank missile system. Aspects such as the light-footed suspension and turret with 20mm machine cannon are accurately recreated, as are the MILAN system, thermal night vision device and more! Modelers can choose to assemble the kit with open or closed engine hood, and are sure to enjoy the addeed detail provided by accessories such as sleeping bags, nets and much more, as well as the full-body commander figure and a driver torso figure.   Warning! Not suitable for children under 14 years.

Plus
1:35 Diorama-Set Engine Maint.Kübelw.(1)

Échelle 1:35

1:35 Diorama-Set Engine Maint.Kübelw.(1)

€10.39

Article number: 300035220 Product: 1:35 Diorama-Set Engine Maint.Kübelw.(1) Maintaining the Kübelwagen which transported WWII German soldiers in extreme conditions from Africa to Russia was an important task. ★This set comes with a variety of parts to depict items such as brake drum parts, a spare tire, a jack and more, as well as a soldier figure to easily allow you to depict an engine maintenance or a wheeling changing scene. ★Accessories in this set such as the workbench and toolbox will deepen the realism of your diorama.   Warning! Not suitable for children under 14 years.

Plus
1:35 Diorama-Set Ger.Engine Maint.Cr.(2)

Échelle 1:35

1:35 Diorama-Set Ger.Engine Maint.Cr.(2)

€15.49

Article number: 300035180 Product: 1:35 Diorama-Set Ger.Engine Maint.Cr.(2) This set will easily allow you to depict a scene of WWII German tank engineers preparing to work on an engine. ★In addition to two engineer figures in overalls, engine parts for a Maybach HL230 engine which powered Tiger I, Panther, and King Tiger tanks are included. ★It also includes accessory parts to depict tools, toolboxes, an oiler, a burner, a drum can etc. to provide your diorama with a greater realistic presence.   Warning! Not suitable for children under 14 years.

Plus
1:35 Diorama-Set Livestock (18)

Échelle 1:35

1:35 Diorama-Set Livestock (18)

€7.99

Article number: 300035128 Product: 1:35 Diorama-Set Livestock (18) Add an extra layer of authenticity to your diorama with this comprehensive set. It contains parts to depict a mule (x1), dog (x1), calf (x1), pig (x1) and piglets (x3), roosters (x2), hens (x2), chicks (x3), eggs (x6), geese (x2) and rabbits (x2).

Plus
1:35 French Med. Tank SOMUA S35

Échelle 1:35

1:35 French Med. Tank SOMUA S35

€51.99

Article number: 300035344 Product: 1:35 French Med. Tank SOMUA S35 The SOMUA S35 was a French Cavalry tank of the Second World War. It was manufactured from 1936 until 1940 to equip armored divisions of the Cavalry. For its day it was a relatively agile medium-weight tank, superior in armor and armament to both its French and foreign competitors, such as the contemporary versions of the German Panzerkampfwagen III. It was constructed from well-sloped, mainly cast, armor sections, that however made it expensive to produce and time-consuming to maintain. While not given a chance to show its full effectiveness during the Battle of France in 1940, the SOMUA showed up strongly in a number of battles with German forces and indeed was used by German forces after the French defeat and even by the Allies after the liberation of France in 1944. It was among the first French tanks developed for use as a cavalry tank, as opposed to the previous infantry roles the tank was largely restricted to under French military doctrine. A cast metal body with armor up to 56mm thick gave excellent protection from German guns, and offensively it could rely on a powerful 47mm gun that repeatedly tore through German tanks. All in all, some 430 SOMUA S35s were produced. Detailed Plastic Kit of Model Franz. SOMUA S35 Mittl. Panzer in Scale 1:35

Plus
1:35 Sov. Med.MBT T-55 A (1)

Échelle 1:35

1:35 Sov. Med.MBT T-55 A (1)

€43.99

Russian Medium Tank T-55A

Plus
1:35 WWII Brit.25pdr Field gun w/Veh.(1)

Échelle 1:35

1:35 WWII Brit.25pdr Field gun w/Veh.(1)

€25.99

Br. 25 PDR. Gun & Quad Tracto

Plus
1:35 WWII Brit.Tank Crom.Mk.IV Cruis.(1)

Échelle 1:35

1:35 WWII Brit.Tank Crom.Mk.IV Cruis.(1)

€41.49

Article number: 300035221 Product: 1:35 Brit.Tank Cromwell Mk.IV Cruis.(1) This is a plastic assembly model kit of the Cromwell Mk.IV Cruiser tank, which served alongside the Churchill infantry tank after the Normandy landings in June, 1944. The distinctive riveted armor and turret have been precisely reproduced. The large road wheels, which allowed the Cromwell to move quickly on the battlefield, have also been accurately rendered. Parts are included to depict features which were unique to Normandy: "Normandy cowl" ducts which prevented the exhaust gases from entering the tank and hedgerow cutters, which were attached to the front of the tank to allow it to move through the thick brush. Five kinds of decals and a tank crewman figure are included.   Warning! Not suitable for children under 14 years.

Plus
1:35 WWII Diorama-Set Ger.Weapo.Inf.(24)

Échelle 1:35

1:35 WWII Diorama-Set Ger.Weapo.Inf.(24)

€4.99

Article number: 300035111 Product: 1:35 Diorama-Set Ger. Weapons Inf.(24) This is a 1/35 scale plastic model assembly kit depicting a whole host of armament typically carried by WWII German infantry. ★Firearms in the set include Luger P08 and Walther P38 pistols, Kar98K and G41 rifles, MP40 submachine guns, MP44 selective fire rifles, Pz.B.39 anti-tank rifles, MG34 and MG42 machine guns, magnetic mines, and even the Panzerfaust. ★Accessories such as tripods, ammo cases and more are also in the set.   Warning! Not suitable for children under 14 years.

Plus
1:35 WWII Fig-Set G. Sol.Field Brief.(5)

Échelle 1:35

1:35 WWII Fig-Set G. Sol.Field Brief.(5)

€13.19

Article number: 300035212 Product: 1:35 Fig-Set G. Sol.Field Brief.(5) This set depicts German soldiers from the middle stages of WWII in a variety of poses wearing winter uniforms and overcoats standing around a stove discussing battle strategies. ★It includes five figures depicting an officer and a noncommissioned officer looking over an open map, a soldier looking at his watch, another carrying a MG42 machine gun on his shoulder, and a squatting soldier. ★Also included in the set is a German shepherd figure lying down and accessories such as a newspaper and magazine. ★This set would go great in combination with winter-themed dioramas.   Warning! Not suitable for children under 14 years.

Plus
1:35 WWII Fig-Set Ger.Infant. Winter (5)

Échelle 1:35

1:35 WWII Fig-Set Ger.Infant. Winter (5)

€14.29

Article number: 300035256 Product: 1:35 WWII Fig-Set Ger.Infant. Winter (5) In a crouched position, these soldiers are very cautious of their surroundings while pushing forward following a tank. Such a tense frontline scene can now be displayed with this plastic assembly model set which includes five German soldier figures wearing winter uniforms, cotton-made smocks, and realistically reproduced winter overcoats seen during the middle stages of WWII. The noncommissioned officers are depicted carrying weapons such as an MP40 submachine gun and rifles and standing in lower poses than their field commander who has a Walther P38 and a grenade in each hand. Set includes five figures.   Warning! Not suitable for children under 14 years.

Plus
1:35 WWII Fig-Set Ger.Tank Crew Rest(6)

Échelle 1:35

1:35 WWII Fig-Set Ger.Tank Crew Rest(6)

€10.39

Article number: 300035201 Product: 1:35 ig-Set Ger. Tank Crew Rest(6) This is a 1/35 scale plastic assembly kit of a WWII German tank crew reproduced in realistic relaxed poses. Set includes figures to depict two tank commanders, three tank crew, and an enlisted soldier, in 3 different types of uniform. This set is perfect to display in combination with a wide range of German tank models. Set includes 6 figures.   Warning! Not suitable for children under 14 years.

Plus
1:35 WWII Fig-Set Sov.Infan.Assault (12)

Échelle 1:35

1:35 WWII Fig-Set Sov.Infan.Assault (12)

€17.99

Article number: 300035207 Product: 1:35 Fig-Set Sov. Infantry Assault (12) This is a 1/35 scale plastic assembly model set of a Russian Army Assault Infantry unit which protected Mother Russia against the invading German forces during WWII. This set includes 12 figures in different poses such as a commander pointing and giving instructions, as well as soldiers shooting from up above and jumping off a tank. Uniforms depict those worn at the Kursk front from 1943 through to the end of the war. The PPsh-41 submachine gun also known as the "Mandolin" and the Degtyaryov light machine gun both feature a sharp finish. T34-85 Russian Medium Tank not included.   Warning! Not suitable for children under 14 years.

Plus
1:35 WWII Fig.-Set Ger. Assault Tro. (8)

Échelle 1:35

1:35 WWII Fig.-Set Ger. Assault Tro. (8)

€6.89

Plus
1:35 WWII Fig.-Set Ger. MG Troops (7)

Échelle 1:35

1:35 WWII Fig.-Set Ger. MG Troops (7)

€6.89

Article number: 300035038 Product: 1:35 Fig.-Set Ger. MG Troops (7) This is a 1/35 scale plastic model assembly kit depicting WWII German soldiers with MG34 and MG42 machine guns. ★Features parts to make three different teams of gunner and loader, plus a commander with binoculars for seven figures in total.   Warning! Not suitable for children under 14 years.

Plus
1:35 WWII Fig.-Set Ger.Africa Corps Inf.

Échelle 1:35

1:35 WWII Fig.-Set Ger.Africa Corps Inf.

€19.99

Article number: 300035314 Product: 1/35 WWII Fig.-Set German Africa Corps Infantry The Elite in North African Desert This set contains 5 figures depicting infantrymen from Field Marshal Rommel's vaunted Africa Coprs, including an officer, an NCO, a rifleman in firing position, a machine gunner, and a loader. Each can be assembled in a realistic pose and all feature superb details such as open-collared jackets, goggles, and long canvas boots. Further enhance the models' realism with Item 12641 1/35 WWII German Military Insignia Decal Set (Africa Corps/Waffen SS). About the Uniform   The Africa Corps uniform was basically the same as the one for Europe, but featured open collars and a specific armband on the right sleeve. The Olive Green cotton shirt and trousers faded into various shades in the desert sun. Leather was not suited for the dry conditions, so canvas belts and boots were worn. This uniform was easy to produce and influenced the design of European Theater uniforms from mid-WWII onwards.

Plus
1:35 WWII Ger. Flak-Pz IV Möbelwagen (4)

Échelle 1:35

1:35 WWII Ger. Flak-Pz IV Möbelwagen (4)

€28.99

Article number: 300035101 Product: 1:35 Ger. Flak-Pz IV Möbelwagen (4) This is a 1/35 scale plastic model assembly kit depicting the Möbelwagen, a variation of the Pz.Kpfw.IV tank fitted with quadruple 20mm anti-aircraft guns. ★The boxy form of the vehicle is captured in style, with three different armor positions possible. ★Comes with four figures in action pose. Flakpanzer Mobelwagen   Warning! Not suitable for children under 14 years.

Plus
1:35 WWII Ger. Halftrack 250/9 Arm. (1)

Échelle 1:35

1:35 WWII Ger. Halftrack 250/9 Arm. (1)

€24.99

Article number: 300035115 Product: 1:35 Ger. Halftrack 250/9 Arm. (1) This is a 1/35 scale plastic model assembly kit recreating the German WWII half-track Sd.Kfz. 250/9. ★From the open-top turret to the 20mm cannon, the form of the compact vehicle is captured faithfully. ★Link-type assembly tracks lend a further air of realism to the depiction of the complex suspension. ★Comes with a figure peering through binoculars.   Warning! Not suitable for children under 14 years.

Plus
1:35 WWII Ger. Infantery mounted (2)

Échelle 1:35

1:35 WWII Ger. Infantery mounted (2)

€6.89

German Mounted Infantry   Warning! Not suitable for children under 14 years.

Plus
1:35 WWII Ger. PzKpfw. IV Ausf. D (3)

Échelle 1:35

1:35 WWII Ger. PzKpfw. IV Ausf. D (3)

€20.99

Article number: 300035096 Product: 1:35 Ger. PzKpfw. IV Ausf. D (3) This is a 1/35 scale plastic model assembly kit depicting the Ausf.D variant of the German WWII tank Pz.Kpfw.IV. ★From the short-barrelled 75mm gun to the powerful design, the form of the tank is recreated in style. ★Comes with parts to recreate either early or late production Ausf.D variants. ★Includes three figures depicted in uniform seen during the invasions of Poland and France in the opening years of WWII.   Warning! Not suitable for children under 14 years.

Plus
1:35 WWII Ger.Kuebelwagen T82 Ramcke (5)

Échelle 1:35

1:35 WWII Ger.Kuebelwagen T82 Ramcke (5)

€31.99

Article number: 300035304 Product: 1/35 German Kubelwagen Type 82 - Ramcke Parachute Brigade After the 1941 assault on Crete, elite German parachute units were formed into a brigade. The parachute unit, know as the "Ramcke Parachute Brigade" was created to lead assaults in North Africa against Allied forces and counter act the British SAS units attack. The brigade was heavily involved in the Second Battle of El Alamein, the attack on Stirling's Special Air Service, and DAK's assault of the Suez Canal. In 1943, at Tunisia, the Ramcke brigade saw its last battle and was forced to surrender to British forces. - Figures represent soldiers of the elite Ramcke Parachute Brigade in North Africa. - A driver, officer, machine-gunner (seated in the rear of the Kubelwagen), a non commissioned officer providing directions (wearing a tropical Herman Meyer hat), and a rifleman figure are included. - The figure from the original 1/35 scale German Kubelwagen Type 82 Africa-Corps is also included for a total of 6 figures.

Plus
1:35 WWII SdKfz.161/1 Panzer IV H Fr.(1)

Échelle 1:35

1:35 WWII SdKfz.161/1 Panzer IV H Fr.(1)

€41.49

Article number: 300035209 Product: 1:35 Ger. SdKfz.161/1 Panzer IV H Ea.(1) During WWII, the most important tank used by German forces throughout the entire conflict, and also the most produced was the Pz.Kpfw.IV. This is a 1/35 scale plastic assembly model kit of the German Pz. Jpfw. IV Ausf.H Early Version which is generally regarded as the definitive model of the Pz.Kpfw.IV tanks. The model accurately depicts the tank with its powerful 48 caliber 75mm gun and Schürzen that surrounded the tank sides and turret. The kit includes two kinds of hull front plates and sprocket wheels to allow you to create a model from different dates of production. Also included is a tank commander figure wearing a winter issue jacket.   Warning! Not suitable for children under 14 years.

Plus
1:35 WWII SdKfz.161/3 Möbelwag. 3,7cm(1)

Échelle 1:35

1:35 WWII SdKfz.161/3 Möbelwag. 3,7cm(1)

€44.49

Article number: 300035237 Product: 1:35 Ger. SdKfz.161/3 Möbelwag. 3,7cm(1) About the Möbelwagen In the latter half of World War II, the Wehrmacht, having lost air superiority to the Allies, turned to the development of anti-aircraft vehicles. The first vehicle to use the chassis of the Panzer IV tank as a base was the Self Propelled AA Gun Mobelwagen. The mass-production model started to be manufactured in February 1944. It was equipped with a powerful 3.7 Flak 43 cannon capable of firing 250 shots/min, and thick armored plates surrounding the upper part of the vehicle, which could be raised or lowered for horizontal firing. By 1945, a total of 240 vehicles were produced, most of which were deployed to the western front, providing a vicious defense against approaching fighters and bombers of the Allies. About the Model ★This is the plastic model assembly kit based on the German Self Propelled AA Gun Möbelwagen. ★Overall length: 168mm, overall width 82mm. ★The unique style of the Flak 43 equipped mass production model has been realistically recreated. ★Gun barrel of Flak 43 and sighting device move together on arm to enhance authenticity. ★Ammunition ejection net has been recreated with nylon mesh for added realism. ★Sliding hatch on the upper chassis has been included as a separately molded part. Unique cylindrical exhaust pipes have also been included. ★Armored plates protecting firing deck can be modeled in three positions for times of: movement, anti-aircraft firing, and horizontal firing. ★Kit includes one crew figure gazing skyward.   Warning! Not suitable for children under 14 years.

Plus
60 de 547 Article