5 22

Trier selon:

Meilleures ventes
  • Meilleures ventes
  • Nouveautés
  • Prix croissant
  • Prix décroissant
Filtrer

Filtrer
Prix
Catégorie
Marque
Marques & licences
Échelle
1:35 Diorama-Set Ger.Barrel & Jerry Can

Échelle 1:35

1:35 Diorama-Set Ger.Barrel & Jerry Can

€8.49

Article number: 300035186 Product: 1:35 Diorama-Set Ger.Barrel & Jerry Can During WWII, the Germany army relied on drums and jerry cans to supply their units with gasoline and drinking water respectively which are depicted with this set. ★The drums feature the characteristic dual protective bands and a centrally located fuel receptacle used by the German army. ★Jerry cans are faithfully reproduced with their distinctively designed caps and centrally located engravings; designs with hand pumps and faucets are also included. ★Use this set as accessory parts to expand dioramas featuring German subjects.

Plus
1:35 Fig-Set Sov. Infantry Assault (12)

Échelle 1:35

1:35 Fig-Set Sov. Infantry Assault (12)

€16.99

Article number: 300035207 Product: 1:35 Fig-Set Sov. Infantry Assault (12) This is a 1/35 scale plastic assembly model set of a Russian Army Assault Infantry unit which protected Mother Russia against the invading German forces during WWII. This set includes 12 figures in different poses such as a commander pointing and giving instructions, as well as soldiers shooting from up above and jumping off a tank. Uniforms depict those worn at the Kursk front from 1943 through to the end of the war. The PPsh-41 submachine gun also known as the "Mandolin" and the Degtyaryov light machine gun both feature a sharp finish. T34-85 Russian Medium Tank not included.

Plus
1:35 WWII Ger.Milit.Insignia Decal Vol.2

Échelle 1:35

1:35 WWII Ger.Milit.Insignia Decal Vol.2

€10.99

Article number: 300012641 Product: 1/35 WWII Ger.Milit.Insignia Decal Vol.2 Add further fine details to your 1/35 scale German WWII Infantry figures with this easy-to-use decal set. These are designed with the modeler in mind to save time and stress allowing for a more realistic finish. 1:35

Plus
1:35 WWII Pkw.K1 Kübelwagen Typ82 (1)

Échelle 1:35

1:35 WWII Pkw.K1 Kübelwagen Typ82 (1)

€15.99

Article number: 300035213 Product: 1:35 Ger. Pkw.K1 Kübelwagen Typ82 (1) The highly reliable, compact Kübelwagen Type 82, which served as transportation for high ranking German officers throughout WWII, now comes realized as a plastic assembly model kit. ★The model realistically captures the functional form of this mass produced car. ★The plain constitution of the press-lined body as well as the suspension arms, under guards, suspension area, and interior details such as the instrument panel and pedals all feature a realistic finish. ★You may choose to assemble all four doors in either open or closed positions. ★A figure depicting a driver in a relaxed pose is included.

Plus
1:35 WWII PzKpfw. II Ausf.F/G (5) SK.121

Échelle 1:35

1:35 WWII PzKpfw. II Ausf.F/G (5) SK.121

€12.99

Article number: 300035009 Product: 1/35 WWII PzKpfw. II Ausf.F/G (5) SK.121 In the morning of September 1, 1939, the German forces consisting of the 3rd, 4th, 8th, 10th and the 14th Armies invaded Poland all heading for Warsaw, its capital. This was the beginning of the 2nd World War that had shaken the whole world for six years and the Germans made a good show of their war efforts at the start with this violent surprise offensive by massed air forces and mechanized ground forces in close co-ordination, the so-called "Blitzkrieg". It was none other than the Pzkpfw 11 that had played the key role in this Blitzkrieg which started with the invasion of Poland to be followed by break-through of the Maginot-line 7 months later and ended with the surrender of France. In anticipation of the delay in production of the two main strength tanks of the Pzkpfw III and the Pzkpfw IV then under development, the Ordnance Department decided in 1934 to develop a new tank instead to fill the gap. It gave specifications of the proposed new tank to the following three companies - the Mann, the Krupp and the Henschel. The specifications envisioned a tank weighing less than 10 tons and armed with 2 cm and 7.92 mm machine guns, one each. Among the designs of the rivaling three companies presented, the one by the Mann was selected and the Mann in cooperation with the Daimler-Benz developed a first tank of the a1 type in 1935. When 25 tanks of the same type were produced, the tank was officially named, "Panzer Kampfwagen II". After the first 25, another 25 tanks of the a2 type and 50 of the a3 type were produced in succession by 1936. Tanks of these 3 types thus produced were equipped each with a 6-cylinder, 130HP, May-Bach HL37 engine and credited with a maximum speed of 40km/h. However, it was decried that the horse-power was not enough and the engine was replaced with a May-Bach HL-62 one of 140 HP. The frontal armour, too, was reinforced and a new tank

Plus
1:35 Diorama-Set Sand Bags (36+12)

Échelle 1:35

1:35 Diorama-Set Sand Bags (36+12)

€5.29

Plus
1:35 Fig.-Set US MG/Mörser Trupp(8)

Échelle 1:35

1:35 Fig.-Set US MG/Mörser Trupp(8)

€6.39

Article number: 300135086 Product: 1:35 Fig.-Set US Gun/Mortar Tro.(8) This is a 1/35 scale plastic model assembly kit depicting a WWII U.S. gun and mortar team. ★The set features no fewer than eight figures in highly authentic action pose. ★Detailed depictions of radio equipment, ammo cases and more make for a convincing final product. U.S. Gun and Mortar Team

Plus
1:35 Ger. Fig. Infantery mounted (2)

Échelle 1:35

1:35 Ger. Fig. Infantery mounted (2)

€6.99

German Mounted Infantry

Plus
1:35 Sov. Tank T-34/85

Échelle 1:35

1:35 Sov. Tank T-34/85

€31.99

Article number: 300035138 Product: 1:35 Sov. T34/85 Med. Mainbattletank The T34/85 was built with the aim of overpowering the new and improved German Tiger and Panther tanks which the Russian forces were encountering. It was given a powerful 85mm main gun and a 3-man turret enclosed by cast-iron heavy armor, while the hull featured sloped armor. Nonetheless, it was a relatively lightweight vehicle and thanks to the power supplied by the 500hp V-12 diesel engine was very maneuverable. Around 29,000 were produced between late 1943 and June 1945, and together with its predecessor the T34/76 it provided the impetus for the Russian advance on Berlin. • 1/35 scale plastic model assembly kit. Length: 235mm, width: 88mm. • The T34/85 form with sloped hull armor is faithfully recreated, including renderings of the rough cast iron finish characteristic of Soviet tanks. Weld joints are also accurately recreated. • Features moveable long-barreled 85mm main gun. • Gunner’s rail on hull and other details are depicted using separate parts. • Belt-type parts give an accurate and fuss-free recreation of the tracks. • Includes accessory parts such as fuel cans and spare track links. • Commander and gunner hatches are openable. • Comes with marking options to recreate 4 WWII tanks and one in the Korean War: • Marking Option 1: April 1945, Berlin (No.204); Option 2: Jan. 1945, Eastern Prussia (No.236); Option 3: July 1944, Minsk (No.145); Option 4: April 1945, Berlin (No.341); Option 5: 1950, Korea (No.321).

Plus
1:35 Soviet Mainbattletank T-62A (1)

Échelle 1:35

1:35 Soviet Mainbattletank T-62A (1)

€19.99

Article number: 300035108 Product: 1:35 Soviet Mainbattletank T-62A (1) This is a 1/25 scale plastic model assembly kit depicting the T-62A tank. ★From the powerful 115mm smoothbore gune to the sleek turret and compact hull, the form of the tank is captured in style. ★Features realistic depictions of cast surfaces. ★Detailed renderings of searchlight and 12.7mm machine gun are another highlight. ★Comes with metal mesh to recreate engine room grille, and one Soviet tanker figure.

Plus
1:35 WWII Dt. Panzerjäger Nashorn (4)

Échelle 1:35

1:35 WWII Dt. Panzerjäger Nashorn (4)

€63.99

Article number: 300035335 Product: 1:35 WWII Dt. Panzerjäger Nashorn (4) This is a highly detailed model of the WWII German tank destroyer Nashorn. The full size vehicle featured an 8.8cm gun also known as a PAK 43 and it was fitted to the upper surface of a light turret less chassis. Even though the vehicle was lightly armored, the PAK43 weapon was capable of penetrating 190mm of armor at 1,000 meters. The Nashorn saw action with German heavy antitank battalions fighting Soviet and Allied forces during much of the conflict. Due to its relatively low cost and superior mobility compared to heavier tanks it remained in production until the end of the WWII war. Decals included. Features: • The model accurately recreates the powerful form of the Nashorn, thanks to detailed research performed using an actual example of the vehicle in a museum in Russia. • Features faithful reproductions of the 71-caliber 8.8cm gun and complex fighting compartment. • Metal parts are used to ensure that the gun has authentic movement and weight. • Comes with 3 marking options, including winter and Eastern front versions. • 4 included figures depict driver and 3 crew members in a variety of realistic poses.

Plus
1:35 WWII Fig-Set Ger.Infant. Winter (5)

Échelle 1:35

1:35 WWII Fig-Set Ger.Infant. Winter (5)

€13.99

Article number: 300035256 Product: 1:35 WWII Fig-Set Ger.Infant. Winter (5) In a crouched position, these soldiers are very cautious of their surroundings while pushing forward following a tank. Such a tense frontline scene can now be displayed with this plastic assembly model set which includes five German soldier figures wearing winter uniforms, cotton-made smocks, and realistically reproduced winter overcoats seen during the middle stages of WWII. The noncommissioned officers are depicted carrying weapons such as an MP40 submachine gun and rifles and standing in lower poses than their field commander who has a Walther P38 and a grenade in each hand. Set includes five figures.

Plus
1:35 WWII Fig.-Set MG-Crew Maneuver (5)

Échelle 1:35

1:35 WWII Fig.-Set MG-Crew Maneuver (5)

€10.99

Article number: 300035184 Product: 1:35 WWII Fig.-Set MG-Crew Maneuver (5) This is a plastic assembly model kit of a WWII German machine gun crew in M43 field uniforms and boots with leggings as seen on German soldiers from 1943. This five figure set features a noncommissioned officer carrying an MP40 submachine gun in his hand, three soldiers carrying ammunition cases and a tri-pod gun mount respectively, and the machine gunner with a MG42 machine gun on his shoulder. The set includes sharply detailed parts to depict equipment such as MG42 and MG34 machine guns, tripod, and ponchos. Combine it with models of tanks and other vehicles belonging to the German army for a wider scale diorama.

Plus
1:35 WWII Fig.-Set Tank Ammo Load.Cr.(4)

Échelle 1:35

1:35 WWII Fig.-Set Tank Ammo Load.Cr.(4)

€10.99

Article number: 300035188 Product: 1:35 Fig.-Set Tank Ammo Load. Crew (4) This set will allow you to easily recreate a WWII scene of German soldiers loading a tank with shells. ★Set includes four figures in a variety of poses as well as parts to depict the ammunition and wooden ammunition cases. ★Ammunition cases can be used as a highly authentic addition to Tiger I, King Tiger, Panther, and Pz.Kpfw. IV tank models.

Plus
1:35 WWII Ger.7,5cm An.Tank Gun(PAK) (3)

Échelle 1:35

1:35 WWII Ger.7,5cm An.Tank Gun(PAK) (3)

€7.39

Article number: 300035047 Product: 1:35 Ger. 7,5cm Anti Tank Gun(PAK) (3) This is a 1/35 scale plastic model assembly kit depicting the L/46 75mm Pak40 anti-tank gun used by German forces in WWII. ★The imposing form of the long-barrelled gun is captured in style, down to details such as sight and handle. ★Barrel offers elevation and traverse, while the breech also slides and the carriage can be moved as well. ★Comes with three figures, plus accessories such as amom cases, shells and more.

Plus
1:35 WWII SdKfz.181 Tiger I Mid.Prod.(1)

Échelle 1:35

1:35 WWII SdKfz.181 Tiger I Mid.Prod.(1)

€41.99

Article number: 300035194 Product: 1:35 Ger. SdKfz.181 Tiger I Mid.Prod.(1) The German Tiger I Tank featured a powerful 88mm gun as well as an excellent armor and was the greatest opponent to Allied forces during WWII. This is a 1/35 scale plastic model of the mid-production variant of which 1,354 units were produced from July 1942 to August 1944. The distinct silhouette and features of the mid-production model including the mechanically-complicated suspension, detailed loader's hatch, and equipment such as a scoop have all been realistically reproduced. The model features link type assembly tracks to enhance scale realism.

Plus
1:35/1:16 WWII Figuren-Rangabzeichen

Échelle 1:35

1:35/1:16 WWII Figuren-Rangabzeichen

€9.99

Article number: 300112625 Product: 1:35/1:16 WWII Figure Insignia Decal-Set Use these easy-to-use German Military Insignia decals to add even more exquisite detail to your WWII German military figures. These are designed with the modeller in mind to save time and stress allowing for a more realistic finish. WW2 Ger.Insignia 1/16 1/35

Plus
1:48 Rus. Mit. Pz. T-34/85

Échelle 1:48

1:48 Rus. Mit. Pz. T-34/85

€23.99

Article number: 300032599 Product: 1:48 Rus. Mit. Pz. T-34/85 Item Contents/Information • This is a 1/48 scale plastic model assembly kit. Length: 169mm, width: 63mm. • A brand new kit, it does not carry over any parts from the T34/76 model already in this series (Item 32515). • The form of the powerful medium tank is captured in style, with an ergonomic parts breakdown much like the real T34/85. The rough cast turret texture is expertly recreated, and the lower hull is a plastic part. • Features depictions of later production road wheels, and the later single-piece turret hatch design. • Assembly type tracks use single-piece straight sections. • Comes with a commander figure and two marking options for vehicles in the invasion of Germany, 1945.

Plus
1/35 38(t) Ausf.E/F

Échelle 1:35

1/35 38(t) Ausf.E/F

€31.99

Article number: 300035369 Product: 1:35 Ger. 38(t) Ausf.E/F (1) A brand new face is welcomed to the 1/35 Military Miniatures Series with the addition of the 38(t)! This subject in fact started life as a light tank developed for Czechoslovakia, but was adopted and renamed 38(t) by German forces after their occupation of the country in 1939. It was equipped with a 3.7cm main gun and could reach speeds of up to 42km/h powered by the 125hp engine. A number of variants were produced, of which the Ausf. E/F 38(t)s were manufactured over a one-year period from November 1940; they featured improved armor and were thrown into the conflict with Soviet forces after the start of Operation Barbarossa. • This is a 1/35 scale plastic model assembly kit. • Tamiya designers studied a real 38(t) in the Kubinka Tank Museum, getting the data to make this highlyaccurate model with detail right down to the rivets. • The turret front left sight moves in conjunction with the 3.7cm gun. • Features a realistic recreation of the suspension with large road wheels and upper return rollers. • Assembly type tracks give natural recreation of the upper run ‘sag.’. They feature single piece straight sections. • The kit comes with a figure recreating a commander for placement in the cupola hatch. • Includes two marking options for vehicles with units on the Eastern Front in 1941.

Plus
1/35 Easy Eight Korean War

Échelle 1:35

1/35 Easy Eight Korean War

€48.99

Article number: 300035359 Product: 1:35 US M4A3E8 Easy Eight Korean War This model assembly kit depicts the Korean War variant of the M4A3E8 "Easy Eight" Sherman. This kit variant includes new parts! The Sherman – reliable and available in huge numbers - was a gamechanger for the Allies in WWII, and the Easy Eight a prevalent variant most notable for its horizontal volute spring suspension (HVSS) and smooth ride. The Easy Eight's career did not end with WWII, however, as a number were refurbished and thrown back into action by a largely demobilized U.S. Army in the Korean War from 1950. They faced off against T34/85s operated by the Korean People's Army with great success, and were later often used in a supporting fire role.

Plus
1/35 German Field Team/Eqpt.

Échelle 1:35

1/35 German Field Team/Eqpt.

€25.99

Article number: 300037023 Product: 1:35 German Field Team/Eqpt.(2) The latest release in the Tamiya-Italeri Series is based upon the Italeri 1/35 Field Work Shop kit. This set has newly-molded parts, plus Tamiya figures, accessories and instruction manual, all packaged in a new Tamiya box! It can be constructed into a diorama by itself, or used in conjunction with products from Tamiya’s huge range of German vehicle model assembly kits to create a highly realistic scene.

Plus
1/35 German Infantry Mid-WWII

Échelle 1:35

1/35 German Infantry Mid-WWII

€18.99

Article number: 300035371 Product: 1:35 German Infantry Mid-WWII (5) • This is a 1/35 scale plastic figure assembly kit set. • Contains parts for 5 figures in realistic pose: a non-commissioned officer (NCO) with binoculars, a rifleman with his foot on some rubble, another with cases and one with grenade cases on the ground, plus a machine gunner. • Figures are depicted in mid-WWII M40 uniform, jack boots and suspenders. NCO and kneeling rifleman have a choice of helmet or cap. • A plethora of newly-molded accessories includes Kar98k rifle, MG34 machine gun, MP40 submachine gun and more.

Plus
1:35 Bundeswehr Flak-Panzer Gepard (1)

Échelle 1:35

1:35 Bundeswehr Flak-Panzer Gepard (1)

€23.99

Article number: 300035099 Product: 1:35 BW Flak-Panzer Gepard (1) This is a 1/35 scale plastic model assembly kit depicting the Gepard, a post-WWII anti-aircraft tank operated by West Germany. ★From the 4km-range 35mm cannons to the radar equipment front and rear, the form of the tank is captured in style. ★Features moving barrel and radar depictions, plus opening turret rear hatches. ★Metal net is included in the kit to recreate engine deck grille details. ★Comes with a commander figure in beret.

Plus
1:35 Diorama-Set Ger.Engine Maint.Cr.(2)

Échelle 1:35

1:35 Diorama-Set Ger.Engine Maint.Cr.(2)

€14.99

Article number: 300035180 Product: 1:35 Diorama-Set Ger.Engine Maint.Cr.(2) This set will easily allow you to depict a scene of WWII German tank engineers preparing to work on an engine. ★In addition to two engineer figures in overalls, engine parts for a Maybach HL230 engine which powered Tiger I, Panther, and King Tiger tanks are included. ★It also includes accessory parts to depict tools, toolboxes, an oiler, a burner, a drum can etc. to provide your diorama with a greater realistic presence.

Plus
1:35 Panther G Early Zimmerit Sheet

Échelle 1:35

1:35 Panther G Early Zimmerit Sheet

€12.99

Article number: 300012646 Product: 1:35 Zimmerit Sheet Panther G Early Simulating Zimmerit on military models using putty enhances the model's presence but at the same time it requires advanced skills and is time consuming. Made for the novice to intermediate modeler in mind, these stickers enable reproduction of Zimmerit on Item 35170 German Panther Ausf.G Early Production without the use of putty or more advanced modeling techniques.

Plus
1:35 WWII Brit.Tank Churchill Mk.VII (6)

Échelle 1:35

1:35 WWII Brit.Tank Churchill Mk.VII (6)

€36.99

Article number: 300035210 Product: 1:35 Brit. Tank Churchill Mk.VII (6) This is a 1/35 scale plastic assembly kit model of the British Infantry Tank Mk.IV Churchill Mk.VIII. Introduced at the end of 1943, the tank demonstrated its worth during the Normandy invasion while supporting Allied infantry units. The traditional form of the tank, including the unique suspension system with multiple small road wheels, has been faithfully reproduced. In addition, the kit comes with figures which depict a commander, gunner, driver, and a farmer. Abundant accessories such as a cart and milk cans are also included to create a simple diorama.

Plus
1:35 WWII Dt. PzKpfw. III Ausf.L (1)

Échelle 1:35

1:35 WWII Dt. PzKpfw. III Ausf.L (1)

€39.99

Article number: 300035215 Product: 1:35 Ger. PzKpfw. III Ausf. L (1) From the beginning and through to the middle stages of WWII, the Pz.Kpfw.IIIs along with the Pz.Kpfw.IVs were the core tanks used by German tank divisions. Each variant of the Pz.Kpfw.III including the Ausf.L was highly reliable, came armed with a long barreled 60 caliber 50mm gun and had reinforced armor. This is a 1/35 scale plastic assembly model kit of one such Ausf.L tank. Famous characteristics of the Ausf.L which include the driver's front panel and main gun mantlet have been realistically reproduced. The fighting compartment loading area, turret interior, and commander’s seat have been reproduced. You can also choose to assemble each hatch in either open or closed positions. Accessory parts seen on the hull such as spare tracks and tools feature a precise finish. A tank commander figure is included.

Plus
1:35 WWII Fig-Set Ger.Tank Crew Rest(6)

Échelle 1:35

1:35 WWII Fig-Set Ger.Tank Crew Rest(6)

€9.99

Article number: 300035201 Product: 1:35 Fig-Set Ger. Tank Crew Rest(6) This is a 1/35 scale plastic assembly kit of a WWII German tank crew reproduced in realistic relaxed poses. Set includes figures to depict two tank commanders, three tank crew, and an enlisted soldier, in 3 different types of uniform. This set is perfect to display in combination with a wide range of German tank models. Set includes 6 figures.

Plus
1:35 WWII Fig-Set US Infantry Assault(6)

Échelle 1:35

1:35 WWII Fig-Set US Infantry Assault(6)

€10.99

Article number: 300035192 Product: 1:35 Fig-Set US Infantry Assault (6) This plastic assembly model set features six (two noncommissioned officers & four infantrymen) U.S. WWII soldiers in a variety of dynamic in-battle poses. ★These figures are depicted wearing authentic M1941 and M1943 field jackets and canvas leggings. ★The tense situation of battle can be clearly seen through the expressions of the models such as the noncommissioned officers giving instructions to their men who are waiting for the order to attack. ★Weapons such as the M1 Garand rifles and Thompson submachine gun have a sharp realistic finish.

Plus
1:35 WWII Fig.-Set US Infant. W-Eur.(8)

Échelle 1:35

1:35 WWII Fig.-Set US Infant. W-Eur.(8)

€6.89

Article number: 300035048 Product: 1:35 Fig.-Set US Infant. W-Europe (8) This is a 1/35 scale plastic model assembly kit depicting U.S. infantry in action in Western Europe during WWII. ★Contains parts for eight figures in total. ★Figures are depicted in 1941 and 1943 issue uniform. ★Comes with a plethora of parts for firearms such as M1 rifle and M1 carbine, as well as plenty of accessories like holsters and packs.

Plus
1:35 WWII Ger. PzKpfw. IV Ausf. D (3)

Échelle 1:35

1:35 WWII Ger. PzKpfw. IV Ausf. D (3)

€19.99

Article number: 300035096 Product: 1:35 Ger. PzKpfw. IV Ausf. D (3) This is a 1/35 scale plastic model assembly kit depicting the Ausf.D variant of the German WWII tank Pz.Kpfw.IV. ★From the short-barrelled 75mm gun to the powerful design, the form of the tank is recreated in style. ★Comes with parts to recreate either early or late production Ausf.D variants. ★Includes three figures depicted in uniform seen during the invasions of Poland and France in the opening years of WWII.

Plus
1:35 WWII Ger.PzKpfw.II Ausf. A/B/C (1)

Échelle 1:35

1:35 WWII Ger.PzKpfw.II Ausf. A/B/C (1)

€44.99

Article number: 300035292 Product: 1:35 Ger. PzKpfw. II Ausf. A/B/C (1) After WWI, Germany pushed forward the development of battle tanks under a blanket of secrecy. The Panzerkampfwagen II used the Panzerkampfwagen I's hull and came armed with a 2cm main gun. Mass production of the Ausf.A began in 1937 and various improvements including a new suspension led to the Ausf.C. Until the end of production in April 1940, 1088 Panzer II tanks were manufactured. They led the surprise invasion on Poland and were the main tanks used in the attack on France. Later, they were successfully used in reconnaissance missions until the end of the war. About the Model •1/35 model of the German Panzerkampfwagen II tank. •Supplemental armor plate parts can be installed in the same manner as the actual tank. •Various hatches throughout the tank are separately-molded, and armor panels are included to accurately recreate the different variants. •Assembly-type tracks feature single-piece sections for effortless construction. •Comes with a commander figure and three kinds of markings for the French campaign. •Display the Panzerkampfwagen II with other vehicles such as the French Battle Tank B1 bis, French Armored Carrier UE, German 3 Ton 4x2 Cargo Truck, and the new German Infantry Set (French Campaign) to create dioramas of the early WWII battlefield.

Plus
1:35 WWII PzKpfw.VI Tiger I E Early(1)

Échelle 1:35

1:35 WWII PzKpfw.VI Tiger I E Early(1)

€42.99

Article number: 300035216 Product: 1:35 Ger. PzKpfw.VI Tiger I E Early (1) The Tiger I needs little introduction, this legendary 88mm gun-toting AFV being the subject of countless war tales. Early production versions of the Tiger I were rushed from the factories by the end of 1942, bound for the harsh realities of the Eastern Front and the conflict with Soviet Russia, as well as the sweltering climes of North Africa. This model recreates such an early production variant, from the weighty overall design down to parts such as the turret with circular cupola, smoke dischargers, and large pistol port. Hull details such as air cleaners are of course not missed out. The kit also includes six marking options and an authentic figure.

Plus
1:35 WWII SdKfz.161/1 Panzer IV H Fr.(1)

Échelle 1:35

1:35 WWII SdKfz.161/1 Panzer IV H Fr.(1)

€39.99

Article number: 300035209 Product: 1:35 Ger. SdKfz.161/1 Panzer IV H Ea.(1) During WWII, the most important tank used by German forces throughout the entire conflict, and also the most produced was the Pz.Kpfw.IV. This is a 1/35 scale plastic assembly model kit of the German Pz. Jpfw. IV Ausf.H Early Version which is generally regarded as the definitive model of the Pz.Kpfw.IV tanks. The model accurately depicts the tank with its powerful 48 caliber 75mm gun and Schürzen that surrounded the tank sides and turret. The kit includes two kinds of hull front plates and sprocket wheels to allow you to create a model from different dates of production. Also included is a tank commander figure wearing a winter issue jacket.

Plus
1:35 WWII SdKfz.163 Sturmgeschütz IV(1)

Échelle 1:35

1:35 WWII SdKfz.163 Sturmgeschütz IV(1)

€19.99

Article number: 300035087 Product: 1:35 Ger. SdKfz.163 Sturmgeschütz IV (1) This is a 1/35 scale plastic model assembly kit recreating the 75mm gun-equipped Sturmgeschütz IV deployed by Nazi Germany in WWII. ★The powerful, form of the vehicle is captured in style. ★Features optional hull front cement block for armor reinforcement, plus parts recreating Schürzen side armor plates. ★Comes with a commander figure in action pose.

Plus
1:35 WWII US Med.Tank M4 Sherman Ea.(3)

Échelle 1:35

1:35 WWII US Med.Tank M4 Sherman Ea.(3)

€32.99

Article number: 300035190 Product: 1:35 US Med.Tank M4 Sherman Ea.(3) This is a 1/35 scale plastic assembly kit of the M4 Sherman, the U.S. Army's mainstay tank during WWII which greatly contributed to the eventual Allied victory. The kit depicts an early production version that was powered by a radial engine and featured sloped frontal armor and a turret without a loader's hatch. Different production methods were used to produce the actual tank, and the welded hull and cast turret have been accurately reproduced. Modellers can also enjoy turret interior details such as the main gun breech and radio equipment. Parts for accessories such as additional hull and turret armor, large fenders, and spare track links are also included. Comes with driver and radio operator torso figures as well as 1 commander figure.

Plus
1:48 Diorama-Set Jerry Can&Barral

Échelle 1:48

1:48 Diorama-Set Jerry Can&Barral

€10.99

Article number: 300032510 Product: 1:48 Diorama-Set Jerry Can&Barrel Originally used by the Germans, Jerry cans Ewere soon used by the Allies as well to transport fuel and water. Set includes drum cans, Jerry cans, bags and other equipment for use with 1/48 MMV series models. Comes with both Allied and German versions.

Plus
1:48 US 2.5to 6x6 Airf. Fuel Truck (2)

Échelle 1:48

1:48 US 2.5to 6x6 Airf. Fuel Truck (2)

€25.99

Article number: 300032579 Product: 1:48 US WWII 2.5to 6x6 Airf. Fuel Tr.(2) The model US Airfield Fuel Truck - 2 1/2 Ton 6x6 in 1/48 scale has a length of about 107 mm. What better subject to compliment your 1/48 scale diorama than this U.S. airfield fuel truck model. The model is a modification of Item 32548 US 2.5 Ton 6x6 Cargo Truck and depicts a fuel truck typical of those that would have served during WWII.

Plus
1:48 US Figure-Set Infantry GI Set

Échelle 1:48

1:48 US Figure-Set Infantry GI Set

€13.99

Article number: 300032513 Product: 1:48 Figuren-Set US Infanterie (15) About the Model 1 set includes: Noncommissioned Officer x 2 Rifleman x 5 BAR man x 2 Machine gunner x 1 Bazooka gunner x 1 Loader x 2 Tank crewman x 2 Separate sprue for weapons and equipment. 1/48 US Infantry GI Set

Plus
1/35 Hummel (Late Production)

Échelle 1:35

1/35 Hummel (Late Production)

€54.99

Article number: 300035367 Product: 1/35 Hummel (Late Production) Catch the Buzz! The Hummel was developed by German designers in short time, intended to provide a quick boost for troops that had begun to struggle in the aftermath of their invasion of the Soviet Union in 1941. Its chassis was a hybrid using parts from the Pz.Kpfw.III and IV, and the gun was the powerful sFH18/1 15cm piece that fired 43.5kg howitzer rounds distances up to and over 13 kilometers. Hummels joined the fray from 1943 in the showdown Battle of Kursk, and served through the second half of WWII. About the Model ★This is a 1/35 scale plastic model assembly kit. Length: 190mm, width: 84mm. ★The model authentically captures the Hummel form with thin fighting compartment armor and late production integrated driving compartment. ★Features coordinated sight and 15cm howitzer elevation. ★Assembly type late production tracks feature one-piece straight sections for realistic depiction of upper run "sag." ★Includes 3 figures depicted in the act of loading shells. ★Comes with 2 marking options, for Eastern and Western Front vehicles.

Plus
1/35 JGSDF Type 16 MCV

Échelle 1:35

1/35 JGSDF Type 16 MCV

€57.99

Article number: 300035361 Product: 1:35 JGSDF Type 16 MCV (2) • This is a 1/35 scale plastic model assembly kit. Length: 241mm. • The cutting edge form of the Type 16 is breathtakingly captured, courtesy of in-depth research of actual vehicles. • Refined, angular surfaces have an uncomplicated parts breakdown without sacrificing detail. • Realistically rendered underside features steerable front wheel pairs. • Clear parts are used to recreate light lenses and periscope components, plus goggles. • Rubber tires feature authentic sidewall shapes and tread patterns. • Comes with 2 figures (one commander and one gunner) for installation in the model. • 3 marking options are planned for inclusion in the kit.

Plus
1/35 M8 Combat Patrol Set

Échelle 1:35

1/35 M8 Combat Patrol Set

€35.99

Article number: 300025196 Product: 1:35 US M8 Greyhound Combat Patrol Set This is a limited edition release which pairs the popular M8 "Greyhound" armored car kit (Item 35228) with an existing figure and accessories, plus a sheet for creating new ration cartons – great for creating a mini-diorama straight out of the box. The speedy Greyhound was capable of nearly 90km/h and could defend itself too, with a turreted 37mm gun and armor between 10 and 25mm thick. Astonishingly for a vehicle that saw its service debut in 1943, the M8 still serves some militaries in the current day. About the Model • This is a 1/35 scale plastic model assembly kit. Length: 143mm. • A newly-created sheet depicts the 10-in-1 ration that nourished U.S. troops in the second half of WWII. • Includes parts for a figure from Item 35347, which depicts a tanker lugging a large case. Also included, of course, is the original commander figure from Item 35228. • Includes plenty of accessories from Item 35229, such as a variety of jerry cans, buckets and oil drums, plus canvas bags and sacks that will add lots of life to your model. • Parts recreating the M1919 are used from Item 35360. • A supplementary instruction sheet includes ideas for positioning of accessories and figures.

Plus
1/35 Panther G Early (1 Motor)

Échelle 1:35

1/35 Panther G Early (1 Motor)

€87.99

Plus
1/35 Pz.Kpfw.IV Ausf.F

Échelle 1:35

1/35 Pz.Kpfw.IV Ausf.F

€47.99

Article number: 300035374 Product: 1:35 Ger. Battle Tank IV F L24/75mm Germany’s Pz.Kpfw.IV was a stalwart of the WWII effort, serving from start to finish of the conflict. Manufacture began in 1936 with the Ausf.A, and went through a number of specifications before what was perhaps the definitive short barrelled variant started production in 1941: the Ausf. F. It had reinforced armor and updated hull designs, as well as an L/24 75mm gun. Around 460 rolled off of the production lines, serving on the Eastern front as Nazi Germany grappled with the Soviet Union, and in North Africa. About the Model • This is a 1/35 scale plastic model assembly kit. • In-depth research at the German Tank Museum in Munster contributed to this highly accurate kit, which features brand new parts across the board (only the lower hull and wheels are existing designs).

Plus
1/35 R35

Échelle 1:35

1/35 R35

€27.99

Article number: 300035373 Product: 1:35 Fren. Tank R35 Length: 114mm. A Doughty Light Tank By the 1930s French military planners could no longer ignore the obsolescence of their masterpiece FT17 tank from late WWI, and work started on a genuine successor to fill the void. One of the answers they came up with was the R35 light tank, which utilized rolled steel lower and three-piece cast upper hull designs and was armed with the short barreled 37mm gun. It was crewed by two. When hostilities with Nazi Germany burst into life in May 1940 the R35 was right in the front line. While it showed its armor was reliable, the 37mm gun was inadequate when it came to taking out German armor. The Fall of France in June 1940 meant that production of the R35 was curtailed to approximately 1,600 units. About the Model ★This is a 1/35 scale plastic model assembly kit. Length: 114mm, width: 55mm. ★The R35 form with distinctive rounded hull and complex turret is accurately depicted. ★Turret utilizes slide molding for superior authenticity and a fulfiling build. ★Realistic gun elevation and traverse ranges add to the realism. ★Assembly type tracks feature one-piece straight sections for realistic depiction of upper run 'sag.' ★A single commander figure is included for installation upon the turret rear hatch. ★Comes with two early WWII marking options.

Plus
1/35 SU-76M

Échelle 1:35

1/35 SU-76M

€46.99

Article number: 300035348 Product: 1:35 Sov. SU-76M Self-propelled howitzer The SU-76M filled an important and particularly pressing Soviet need for an effective self-propelled gun against invading German forces after the start of Operation Barbarossa in WWII. Based upon the T-70 light tank chassis, it was production-friendly and some 11,000 were manufactured between 1943 and 1945. Its 76.2mm ZiS-3 gun helped it to play a valuable part offering supporting fire and as an anti-tank weapon. Superior mobility was its calling card, and the SU-76M was also able to operate in close unison with infantry units.

Plus
1/48 Luftwaffe &Kettenkraftrad

Échelle 1:48

1/48 Luftwaffe &Kettenkraftrad

€23.99

Article number: 300032412 Product: 1/48 Luftwaffe & Kettenkraftrad This product takes a modern figure set from ICM and powers it up by adding Tamiya accessories and instructions, in a new Tamiya package! It recreates crew from the Luftwaffe, the famed WWII German air arm which of course included not only pilots but also a whole range of recruits in supporting roles. • This is a 1/48 scale plastic model assembly kit. • Comes with parts for 5 figures: 2 pilots, 2 mechanics (one carrying a bomb, one spray-painting) and a sentry. • Realistic poses give the figures a highly authentic air. Winter gear such as the fur collared pilot’s jackets, heavy sentry’s coat, and winter boots are depicted with aplomb. • Also features a number of accessories such as tools and a sentry post. • Includes Tamiya parts to recreate the Kettenkraftrad and accessories such as oil drums, jerry cans, folded sheets, buckets and more. • Why not pair with Tamiya WWII aircraft models in 1/48 for a detailed and vivid diorama? • Figure parts are a product of ICM.

Plus
1/48 T-55

Échelle 1:48

1/48 T-55

€24.99

Article number: 300032598 Product: 1:48 Rus. T-55 Battle Tank Here is the latest addition to the ever-growing 1/48 Military Miniature Series, creating the mass-produced masterpiece T-55 medium tank that not only provided a base for later T-62, T-72 and T-80 designs still in use today, it spurred Western rivals on and contributed to the great East-West arms race of the Cold War. Its 100mm gun compared favorably with the West’s 90mm counterpart, and with HEAT rounds could defeat up to 390mm of armor. The T-55 was produced in the USSR, and under license in Czechoslovakia and Poland, and supplied to Soviet countries and clients worldwide – it even faced off against U.S.-designed M48s and M60A1s in the Middle East. About the Model • This is a 1/48 scale plastic model assembly kit. Length: 190mm, width: 69mm. • The low, refined T-55 form with hemispherical turret and 100mm gun is captured artfully in compact 1/48 scale. • Features authentic recreations of weld lines and cast turret surfaces. • The 100mm main gun and anti-aircraft machine gun give a realistic finish. • Assembly type tracks have single piece straight sections. • Comes with a commander torso figure surveying the scene in front, and decals to create a single marking option.

Plus
1:16 WWII Figure General Rommel Africa

Échelle 1:16

1:16 WWII Figure General Rommel Africa

€17.99

Article number: 300036305 Product: 1:16 Figure General Rommel Africa This is a 1/16 scale plastic figure assembly kit depicting the "Desert Fox" - German WWII commander Feldmarschall Rommel. ★The figure is depicted in the uniform worn while Rommel was active in fighting in North Africa, with separate parts for collar and medals. ★Goggles are captured realistically using clear parts.

Plus
1:16 WWII Figure Ger. Machine Gunner GC

Échelle 1:16

1:16 WWII Figure Ger. Machine Gunner GC

€16.99

Article number: 300036306 Product: 1:16 WWII Figure Ger. Machine Gunner GC This is a plastic assembly kit model of a WWII German machine gunner wearing a greatcoat and shouldering a MG42 machine gun. The coat features separate parts to depict a wider collar and hems to provide the model with greater realism. Equipment such as the MG42 machine gun and gas mask case have a detailed finish.

Plus
1:16 WWII Figure Luftwaffe Ace Pilot

Échelle 1:16

1:16 WWII Figure Luftwaffe Ace Pilot

€13.99

Article number: 300036302 Product: 1:16 WWII Figure Luftwaffe Ace Pilot This is a 1/16 scale plastic figure assembly kit depiciting a Battle of Britain era Luftwaffe pilot in natural pose. ★From the life jacket to the jodhpurs and boots, the uniform is captured in style. ★Choose between a hat or uncovered head.

Plus
1:35 Bundeswehr Leopard 2A6 (3)

Échelle 1:35

1:35 Bundeswehr Leopard 2A6 (3)

€58.99

Article number: 300035271 Product: 1/35 Bundeswehr Leopard 2A6 (3) The latest upgrade to the Leopard 2 is a newly designed 55 caliber 120mm smooth bore main gun. Measuring 1.3m longer than the 44 caliber main gun of its predecessor, the Leopard 2 A5, the new gun of the 2 A6 provides higher projectile velocity for increased range and penetration. The 2 A6 retains improvements made to previous Leopard 2 tanks including wedge shaped spaced armor effective against chemical weapons and improved electric gun control and stabilization system. The use of the 2 A6 continues to spread throughout Europe with the Netherlands, Spain and Greece adopting the 2 A6 as their main battle tank. About the Model 1/35 scale plastic assembly kit. Overall length: 314mm Accurately reproduced long 55 caliber 120mm smoothbore main gun adds to sense of power. 2 newly designed half body figures (commander and loader) included in kit. Goggles for figures, headlights and taillights reproduced using transparent parts. Kit features extra road signs for reproduction of realistic diorama. Includes decals to reproduce up to 4 different types of markings, including NATO versions used in Kosovo.

Plus
1:35 Bundeswehr MBT Leopard 1 (1)

Échelle 1:35

1:35 Bundeswehr MBT Leopard 1 (1)

€21.99

Plus
1:35 Diorama-Set Motorcycle Orderly (2)

Échelle 1:35

1:35 Diorama-Set Motorcycle Orderly (2)

€11.99

Article number: 300035241 Product: 1:35 Diorama-Set Motorcycle Orderly (2) During WWII, the German army adopted the use of the DKW NZ350 medium sized motorcycle; it is included with this set along with a sign post and a military police officer figure who is giving directions to the rider figure with an opened map. Parts of the NZ350 including the suspension and engine area as well as separate parts to depict the side bags and exhaust are finished with rich detail. Both figures feature natural poses and realistic expressions. The road signs seen on the post from Normandy, France are printed on the box and can be easily cut out and used when recreating your diorama. Two figures included.

Plus
1:35 Fr. Citroen Traction Staff Car (1)

Échelle 1:35

1:35 Fr. Citroen Traction Staff Car (1)

€28.99

Article number: 300035301 Product: 1:35 Fr. Citroen Traction Staff Car (1) This famous French sedan was produced from 1934 to 1957 and featured a lightweight monocoque body with a high performance torsion bar spring suspension. It also had a spacious interior and featured a front-wheel drive system and a low center of gravity. The car proved to be very easy to handle and was used by the French Army, the occupying German Army, and the Free French forces. It was also used by German forces through out the European front and as far away as Russia. •Length: 125mm, Width: 48mm. •This is a 1/35 scale assembly kit model of the Citroen Traction 11CV. •The elegant form of the body and fenders has been accurately reproduced. •For easy assembly of the suspension, the number of parts is kept in check. •You can choose to assemble either open or closed front doors. •By assembling open front doors, you can enjoy viewing the the highly detailed interior. •Set includes one driver figure. •Markings for the German Army x 2, French Army x 1, and Civilian vehicle x 1 are included.(Total 4) •This model will look great in a diorama on its own or with other 1/35 scale models.

Plus
1:35 Ger. 38to Tank Destr. Hetzer (1)

Échelle 1:35

1:35 Ger. 38to Tank Destr. Hetzer (1)

€51.99

Article number: 300035285 Product: 1:35 Ger. 38to Tank Destr. Hetzer (1) Already available as a 1/48 scale MM series kit, Tamiya now responds to the requests of military modellers and announces the release of the German Tank Destroyer Hetzer Mid Production in the 1/35 scale. About the Hetzer In 1943, the German high command ordered development of a new purpose-built tank destroyer to replace all of the interim vehicles like the Marder, and the Hetzer was quickly created to meet this requirement. Based on the Panzerkampfwagen 38(t), the Hetzer housed a crew of 4 in its low, compact hull. It was armed with a powerful Pak 39 L/48 75mm gun in a fixed mounting and featured sloped armor for enhanced protection. 2,584 were produced by May of 1945, and modifications were continually added during production, leading to differences between early, mid, and late production models. About the model •High-quality 1/35 scale assembly kit model of the mid production Jagdpanzer 38(t) Hetzer. •Brand new moldings with new details such as the remote control MG34 machine gun mount on the top of the hull and periscopic binoculars. •Includes both belt type and assembly type caterpillar tracks for more modeling options. •Accessory parts such as a jack and other tools add lifelike detail to the hull. •1 tank crew figure in realistic standing pose included. •4 types of markings also included.

Plus
1:35 Ger. 88mm Flak36 North Africa (8)

Échelle 1:35

1:35 Ger. 88mm Flak36 North Africa (8)

€46.99

Article number: 300035283 Product: 1:35 Ger. 88mm Flak36 North Africa (8) One of the most well-known stories of WWII involved an interrogation of a captured British tank crewman after the battle at Halfaya Pass. "In my opinion," he said, "it is unfair to use flak against our tanks." A German artilleryman nearby responded "Fine, but I think it most unfair of you to attack with tanks whose armor nothing but an 88 will penetrate." Starting life as an anti-aircraft artillery piece, the superb anti-tank capabilities of the gun became legendary when they were used to defeat the heavily armored British Matilda tanks in the North African desert. About the 88mm Flak 36 The German 88mm Flak is one of the most famous artillery pieces of WWII. Designed to combat high-altitude aircraft, it was first pressed into the anti-tank role during the invasion of France in 1940, and proved to be extremely capable. The gun went on to strike fear into the hearts of Allied tank crews in Russia and North Africa.

Plus
1:35 Ger. Horch 4x4 Type1A Veh. (1)

Échelle 1:35

1:35 Ger. Horch 4x4 Type1A Veh. (1)

€15.99

Plus
1:35 Ger. Jagdpanzer IV/70 (V) Lang

Échelle 1:35

1:35 Ger. Jagdpanzer IV/70 (V) Lang

€53.99

Article number: 300035340 Product: 1:35 Ger. Jagdpanzer IV/70 (V) Lang This is a completely new model of the fearsome German tank destroyer Jagdpanzer IV Lang. It is designed from the ground up to be part of the long catalog of models offered in the Tamiya 1/35 scale line up of model kits. The original Jagdpanzer IV tank destroyer was based upon the Panzer IV vehicle and used extensive sloped armor with the 48-caliber 7.5cm gun that had already proven its worth on other vehicles. In January 1944, it was decided to upgrade the Jagdpanzer IV, with the powerful 70-caliber 7.5cm anti-tank gun installed in place of the original 48-caliber weapon. This bigger gun was fitted to the Jadgpanzer IV with the intention of giving it the ability to destroy Allied tanks without even entering their weapons range. It was also the origin of the name Lang, which translates into English as "long". The (V) was applied to vehicles manufactured by the German company Vomag. 930 Jagdpanzer IV /70(V) Lang vehicles were manufactured between August 1944 and March 1945, with German forces taking advantage of the exceptional range of the gun, employing it in both defensive and ambush roles even as their military situation worsened. December 2014 marks 70 years since the Battle of the Bulge, which was effectively the final German offensive of WWII. This model is perfect and right on time to liven up late Second World War dioramas.

Plus
1:35 Ger. PzKpfw. II C Polnish (4)

Échelle 1:35

1:35 Ger. PzKpfw. II C Polnish (4)

€40.99

Article number: 300035299 Product: 1:35 Ger. PzKpfw. II C Polnish (4) After WWI, Germany pushed forward with the development of battle tanks under a veil of secrecy. The Panzerkampfwagen II used the Panzerkampfwagen I's hull and came armed with a 2cm main gun. Mass production began in 1937 and various improvements including a new suspension was made. Approximately 1088 Panzerkampfwagen II Ausf.A-C tanks were manufactured up until April 1940. The Panzerkampfwagen II led the surprise attack on Poland and smashed their way throughout Europe. They were later replaced by better frontline tanks but were successfully used in reconnaissance missions until the end of the war. About the Model •This is a 1/35 scale assembly kit model of the German Panzerkampfwagen II tank. •Comes realistically depicted with a hull, turret, and armament as seen at the invasion of Poland. •The 2cm main gun and tank equipment each have a highly detailed finish. •Turret and hull are separately made pieces. •Photo-etched parts accurately depict exhaust cover. •Enhancing the impression of the Panzerkampfwagen is a driver figure and 3 infantry figures (4 figures included). •Assembly-type tracks have a realistic sag effect and feature single-piece straight sections for effortless construction. •3 kinds of markings for the Polish campaign included. •Length: 138mm, Width: 64mm.

Plus
60 de 320 Article