5 22

Trier selon:

Meilleures ventes
  • Meilleures ventes
  • Nouveautés
  • Prix croissant
  • Prix décroissant
Filtrer

Filtrer
Prix
Catégorie
Marque
Échelle
Focke-Wulf Fw190 D-9

Échelle 1:72

Focke-Wulf Fw190 D-9

€13.99

Article number: 300060751 Product: 1:72 Focke Wulf Fw 190 D-9 Following the successful entry of the Focke-Wulf Fw190 A series of fighter aircraft over the English channel during the autumn of 1941, the German RLM requested a high altitude version to complement the fighter fleet, and three projects were started. The Fw 190B used the B.M.W. 801 turbo-supercharged radial engine and a pressurized cockpit, but very few of these were built. The Fw190C was powered by a 1,750hp Daimler Benz DB603A in-line engine, of which three prototypes were built. The third high altitude project was based on the Focke Wulf Fw190A airframe and powered by a Junkers engine. The fuselage was lengthened to accommodate the V-12 cylinder, liquid cooled, 1,750hp Jumo 213 engine, and made its initial flight during the winter of 1941-42, Five further prototypes were produced, plus a small batch of Fw190 D-0s were completed from standard production Fw 190A-7 airframes. These pre-production aircraft were followed by the Fq-190D-1's which had the increased area vertical fin and rudder. There were no Fq190 D-2 through D-8 designations. The Fw-190D9 began production in June 1944, with early versions having the flat topped canopy, and from W.Nr 210001 onwards having the Galland hood (blown canopy). It went into combat with the III/JG 54 "Grunherz" (Green Hearts) in September 1944, at Achmer, Germany, as top cover for the new Messerschmitt Me262 jet fighters then entering service. Detailed Plastic Kit of model Focke Wulf Fw 190 D-9 in scale 1:72

Plus
1/72 Bf-109 G-6 Messerschmitt

Échelle 1:72

1/72 Bf-109 G-6 Messerschmitt

€22.99

Article number: 300060790 Product: 1/72 Bf-109 G-6 Messerschmitt In great news for modelers in the compact 1/72 scale, the "Gustav" is to be released as a Tamiya kit! With over 30,000 produced, the Messerschmitt Bf109 is the most prolifically manufactured fighter in history; of its variants, the G-6 was the most numerous at 13,000 aircraft. In response to improving Allied foes in the air, Bf109 G aircraft had the more powerful DB605 engine, and from the G-6 were equipped with dual 13mm MG131 machine guns that required the distinctive bulges on either side of the cockpit cowling known as "Beule." Some were even given a 20mm cannon gondola under each wing for further improved firepower. The Bf109 G-6 was deployed on both the Western and Eastern fronts, in particular dominating Soviet adversaries as it continued in service through to the end of WWII. About the Model - This is a 1/72 scale plastic model assembly kit. - The striking, refined form of the G-6 variant Bf109 is captured, including depictions of the Beule bulges. - This product takes inspiration from the highly accurate 1/48 model (Item 61117). Please note that engine cowlings are depicted closed. - The cockpit is inserted after left and right fuselage halves have been put together. It has an accurate interior with streamlined assembly. - Canopy can be assembled in open or closed state. - Landing gear struts have a solid attachment point for accurate attachment angle and position. - Comes with optional drop tank parts. - 2 marking options are planned - JG51 (with distinctive eye marking on the Beule) and JG54. Detailed Plastic Kit

Plus
1:32 A6M2b Zero Model 21 (Zecke)

Échelle 1:32

1:32 A6M2b Zero Model 21 (Zecke)

€119.00

Article number: 300060317 Product: 1:32 Mits.A6M2b ZERO Fighter 21 About the Mitsubishi A6M2b Zero Fighter Model 21 (Zeke) The Japanese Zero Fighter plane was widely feared and respected by friend, foe and all who came into contact with it. A triumph of aerodynamic engineering and military science, the Zero Model 21 served in the skies across East Asia during early stages of World War II, contributing immensely to the Japanese war effort. It remains today an enduring symbol of that fierce and globe-spanning conflict. About the model •1/32 scale assembly kit of the Model 21 Zero Fighter. Length: 283mm, Width: 375mm. •Accurately reproduced curved cowling and fuselage are modeled from slide molding to accurately depict rivets and surface texture. •Realistically replicated Nakajima "Sakae" type 12 engine features propeller reduction unit, exhaust pipe and other detailed parts. •Both folded and extended wing tips included and can be used interchangeably even after assembly. •Durable and precision detailed metal parts depict landing gear system and pitot tube. •Seat belt incorporates photo-etched parts for extra realism. •Retractable landing gears increase display possibilities, while allowing model to be easily stored in package after assembly. •Features movable landing gears, rudder and flaps. •Includes standing and seated pilot figures and seven types of markings for planes which participated in Pearl Harbor attack. •Includes parts to depict any variation of Mitsubishi and Nakajima-built Zero Model 21. •Comes with wheel chocks and access steps. Includes posable display stand. A6M2b Zero Model 21 (Zeke)

Plus
1:32 Mc Donnell F4 C/D PHANTOM II

Échelle 1:32

1:32 Mc Donnell F4 C/D PHANTOM II

€109.00

Article number: 300060305 Product: 1:32 Mc Donnell F4 C/D PHANTOM II The F-4 Phantom II was originally conceived as a carrier-borne fighter for the Navy in the late 1950s but was eventually also adapted by the Air Force and Marines in addition to the air forces of many other countries. This model kit can depict the first variant used by the Air Force, the F-4C, as well the subsequently upgraded F-4D. The kit features a one-piece fuselage for easy assembly and die-cast metal landing gear legs to ensure a stable stance after the kit is finished. The canopy and airbrake may be assembled in either open or closed positions. A wide range of ordnance, two crew figures, and three marking options are also included.

Plus
1:48 F-16CJ Fighting Falcon Lockheed Mar

Échelle 1:48

1:48 F-16CJ Fighting Falcon Lockheed Mar

€56.99

Article number: 300061098 Product: 1/48 Lockheed Mar.F-16CJ Fighting Falcon About the F-16CJ The F-16 is one of the world's top lightweight multi-role fighter aircraft. Since first deployment to U.S. Air Force (USAF) units in the late 1970's, total production numbers have exceeded 4,000, making it the second most highly produced jet fighter plane following the F-4 Phantom. The latest F-16 variant deployed to USAF units, the F-16C Block 50, is capable of precision night and all-weather bombing, and features advanced digital electronics for radar and cockpit displays. The slight variant, the F-16CJ (Block 50), is fitted with HARM Targeting System (HTS) and is used specifically for SEAD (Suppression of Enemy Air Defenses) missions. The F-16CJ (Block 50) has flown SEAD missions over Iraq while monitoring the northern and southern no-fly zones and during Operation Iraqi Freedom. About the Model - Model represents the F-16CJ (Block 50) as used for USAF SEAD missions. - Sleek fuselage including aerodynamic blended wing body design accurately reproduced. - Accurately curved bubble top canopy can be assembled in the opened or closed position. - Horizontal stabilizers are movable and flaperons can be modeled in both the up or down positions. - A range of weapons and accessories are included such as HARM, AMRAAM, and Sidewinder missiles (M & X variants), detachable external fuel tanks, ECM pod, and HTS pod. - One pilot figure included and can be depicted with either standard or JHMCS flight helmet. - Detailed markings for 3 aircraft, including the 5th Air Force commander's aircraft stationed at Misawa airbase in 2005, are included.

Plus
1:48 WWII Dt.Focke Wulf Fw190 A-8/A-8R2

Échelle 1:48

1:48 WWII Dt.Focke Wulf Fw190 A-8/A-8R2

€33.99

Article number: 300061095 Product: 1:48 WWII Dt.Focke Wulf Fw190 A-8/A-8R2 Combating the Flying Fortresses   In 1944, as the U.S. began their long range strategic bombing campaign in earnest with heavily-armed B-17 and B-24 bombers, the Luftwaffe developed the specialized "bomber-killer" R2 variant of the Fw190 A-8. Tamiya now brings you this formidable fighter in the 1/48 scale, and with all the parts included in this kit you can choose to build either the R2 variant or the A-8. About the Fw190 A-8/R2   The Focke-Wulf Fw190 was one of the Luftwaffe's best front-line fighters of WWII. Of all the different variants, the A-8 armed with four 20mm cannon and two 13mm machine guns was the most widely produced. A sub-variant of the A-8 was the R2, which had two of the 20mm cannons replaced by more powerful 30mm guns and added armor protection for its role in attacking the giant 4-engined Allied bombers.

Plus
1:72 Ger. Messerschmitt Bf109E-3

Échelle 1:72

1:72 Ger. Messerschmitt Bf109E-3

€13.99

Article number: 300060750 Product 1:72 Ger. Messerschmitt Bf109E-3 Without a doubt, the Messerschmitt Bf109 can be clamed as the most famous and successful German aircraft from the WW2. It was the world´s most advanced fighter at that time of its debut in 1936, and remained as the standard fighter for the Luftwaffe throughout the conflict. Created by the brilliant designer Willi Messerschmitt, it had the smallest possible air frame built around the most powerful engine available. It also boasted many of the then innovated features such as an all metal stressed skin construction, retractable main landing gear. Automatic Handley-Page leading edge slats, etc. The Bf109 saw the first combat during the Spanish Civil War and fully demonstrated it exceptional maneuverability, inherited from its precedent Bf108 Taifun (Typhoon) multi-purpose sports plane. The Bf109 underwent numerous improvements throughout its carrier, and mass production of the E variant started late in 1939. Within one year, about 2,000 "E" aircraft were rolled out. Its excellent performance greatly contributed in the active service of German pilots at the Western Front and during the "Battle of Britain". The E-3 version used and improved Daimler-Benz DB601Aa engine capable of 1,100 h.p. output. This engine had provision for mounting a 20mm MG FF cannon on the crankcase and firing through propeller hub. The Messerschmitt Bf109E was one of the best fighters of the early WW2 period, on a par with the British Spitfire. Detailed Plastic Kit of model Messerschmitt Bf109E-3 in scale 1:72

Plus
1/32 F-51D Mustang Korean War

Échelle 1:32

1/32 F-51D Mustang Korean War

€138.00

Article number: 300060328 Product: 1:32 N.A. F-51D Mustang Korea ★This is a maiden appearance in detailed 1/32 for the F-51D Mustang that was deployed in hostilities during the Korean War. ★V12 engine is recreated with aplomb. ★Includes recreations of the squared-off propeller tips, two types of radio equipment, and other features that set this aircraft apart from late-WWII variants. ★Comes with parts for two kinds of drop tank, 500lb bombs and 5-inch HVAR rockets.

Plus
1/32 F4U-1D Corsair

Échelle 1:32

1/32 F4U-1D Corsair

€143.00

Article number: 300060327 Product: 1:32 US VOUGHT F4U-1D Corsair This is the D variant of the popular Corsair World War II fighter plane. It uses new parts to recreate features specific to the F4U-1D, which was the first Corsair to be cleared for use on aircraft carriers. This fighter-bomber could carry drop tanks on new hard points under the wing root, and up to 8 rockets under the outer wing. It provided invaluable close support for ground troops during landings in places such as the Philippines and Okinawa, and continued to serve after WWII, in Korea. F4U-1D Specific Detail differences from previous variants: 1. The semi-bubble canopy was altered during production to remove upper side frames and improve visibility. 2. Propeller blades were thicker from the root. 3. Hardpoints under the wing root allowed carrying of bombs and drop tanks. 4. The tail wheel cover had a new fairing to improve aerodynamics. 5. Outer wing sections had extended metal areas with mounts for eight rockets total. 6. Cockpit floor window was scrapped.

Plus
1/48 Bf109 G-6

Échelle 1:48

1/48 Bf109 G-6

€43.99

Article number: 300061117 Product: 1/48 Bf109 G-6 This precision model aircraft assembly kit depicts the Messerschmitt Bf 109 G-6 variant. It compliments Tamiya’s other variants such as the E-3 and E-4/7 Trop. The Bf 109 is a legendary name in aviation, an aircraft which combined longevity and versatility in the hands of the Luftwaffe and other air forces. The G-6 was the most prolifically produced Bf 109, accounting for more than a third of the total. Introduced in early 1943, it could be fitted with underwing 20mm cannons in pods, or synchronized 13mm machine guns in distinctive bulges ahead of the cockpit, and was powered by the Daimler-Benz DB605A liquid-cooled V12, which gave a top airspeed of 640km/h.

Plus
1/48 F-14D Tomcat

Échelle 1:48

1/48 F-14D Tomcat

€100.00

Article number: 300061118 Product: 1/48 F-14D Tomcat • This is a 1/48 scale plastic model assembly kit. Fuselage length: 398mm, wingspan: 408mm (with variable sweep wing in fully forward position). • Tamiya designers spent many hours close up with real aircraft to obtain a highly accurate end product. • Captures F-14D-specific features such as the engine afterburner nozzles, vertical stabilizers and even minute panel lines. • A detailed cockpit includes depictions of updated instrument panels and ejection seats. • Model parts depict late variants of Phoenix, Sparrow and Sidewinder air-to-air missiles. Also included are parts for drop tank, laser- and GPS-guided bombs, LANTIRN targeting pod, TARPS reconnaissance pod and jamming pod – a comprehensive line-up. • Features moving depiction of variable sweep wing. 2 sets of parts - interchangeable after completion - depict sealing plates and air bags with wing in fully swept and fully forward positions. • Slide molding was used to ensure highly realistic canopy, air intake side and fuselage side sections. • Poly caps allow movement of horizontal stabilizers. • Comes with realistic figures depicting pilot and RIO (Radar Intercept Officer) in seated pose. • Includes high-quality decals to realize 4 (planned) marking options, plus a handy set of masking stickers for use when painting the canopy.

Plus
1/48 Ki-61-I d Hien

Échelle 1:48

1/48 Ki-61-I d Hien

€43.99

Article number: 300061115 Product: 1:48 Jap. Ki-61-Id Hien (Tony) Flugzeug The Kawasaki Ki-61 Hien was a WWII Japanese fighter powered by the Ha-40 engine - a license-produced version of a Daimler-Benz power plant. On account of its liquid cooled engine (it was the only Japanese fighter in the Pacific fighting to have one), the Hien was apparently mistaken for a German aircraft and then for an Italian bird, and was given the reporting nickname "Tony." It saw combat action from early 1943 and proved a competitive aircraft with its top speed of 580km/h, used in the desperate Japanese defense of the Solomon Islands and even as an interceptor when U.S. B-29s got in range to bomb the Japanese home islands toward the end of WWII.

Plus
1/48 P-38 F/G Lightning

Échelle 1:48

1/48 P-38 F/G Lightning

€65.99

Article number: 300061120 Product: 1:48 US P-38 F/G Lightning Lighting Strikes! The P-38 Lightning was developed by Lockheed in response to a 1937 proposal from the United States Army Air Corps. Its twin V12 engines were housed one each in twin booms that stretched back to the tailplane, flanking a central nacelle containing the cockpit and weaponry. A combination of superb range, firepower and carrying capacity ensured that the P-38 was a superior fighter-bomber, and it made a considerable impact after joining fighting in Europe in 1942. It was also active in the Pacific War from late that year, its escapades including the shooting down of Japanese Admiral Isoroku Yamamoto in 1943 that provided a significant morale boost for the Allied cause. About the Model ★This is a 1/48 scale plastic model assembly kit. Length: 240mm, width: 330mm. ★Exhaustive studies of actual P-38 aircraft enabled this precise recreation of the distinctive twin boom aircraft form, with particular highlights being early model slimline engine cowlings, wing shape and rounded canopy design. ★Integrated landing gear bay and wing spar parts ensure sturdy assembly and accurate recreation of angle. ★Choose between P-38F and P-38G canopy designs, with each able to be assembled open or closed. ★The detailed cockpit features recreations of the control wheel, bulletproof glass plate, rear-mounted radio equipment and more. ★One-piece tailplane horizontal stabilizer slides on and is secured by rudder components. ★Metallic finish decals are used on main and nose landing gear strut cylinders. ★The nose has depictions of four 12.7mm machine guns and the 20mm cannon. ★Weights are included to ensure correct balance of the model when on display. ★Comes with a seated pilot figure, two marking options and an informative background information leaflet in four languages.

Plus
1/48 P-38H Lightning (WhiBox)

Échelle 1:48

1/48 P-38H Lightning (WhiBox)

€65.99

Article number: 300025199 Product 1:48 US P-38H Lightning About the Model • This is a 1/48 scale plastic model assembly kit. Fuselage length: 240mm, wingspan: 330mm. • The unique form of the P-38 is captured in style, with this kit allowing assembly of the P-38H variant. This kit creates a parked aircraft. • New parts are included to depict P-38H-specific features such as larger supercharger intakes, rear canopy without reinforcing frames, instrumentation, nose landing gear strut and bay covers, main landing gear reinforcements, upgraded 20mm cannon and 12.7mm machine guns that were often modified on the ground, plus turbocharger coolant pipe. • Choose whether to attach optional main landing gear air duct. • Weights are included in the kit to ensure correct balance of the model when displayed. • A detailed cockpit features the wheel-type controls, radio, throttle box and more. • 1 marking option is included, depicting an aircraft with lively nose art and belonging to the 432nd Fighter Squadron, part of the 475th Fighter Group that was devastatingly effective from 1943-44 over the Pacific. • This product will be sold in a plain white box with a color label on the lid. • Comes with canopy masking stickers and a full-color painting guide.

Plus
New
1/48 Spitfire Mk.I

Échelle 1:48

1/48 Spitfire Mk.I

€37.99

Article number: 300061119 Product: 1/48 Spitfire Mk.I The Supermarine Spitfire needs little introduction, one of the best-known aircraft deployed by the Royal Air Force in the Battle of Britain, as British and German forces struggled for control of the skies over the English Channel. The Mk.I had a streamlined form with elliptical wings designed for speed, and was powered by a Merlin engine. This legendary bird has received a complete makeover from Tamiya’s designers with new tooling for an updated and more accurate appearance in the 1/48 Aircraft Series! • 1/48 scale plastic model assembly kit. • Can be assembled to recreate many of the extensive Spitfire Mk.I variants. • Points of interest include superb detailing in areas such as the cockpit and panel lines. • Separate parts are used to recreate main landing gear and horizontal stabilizers. • Comes with 1 figure depicting a seated pilot. • Photo-etched parts are included to recreate radiator, oil cooler, gun sight, seatbelt components and more! • 3 marking options.

Plus
1/48 Swiss Bf109 E-3

Échelle 1:48

1/48 Swiss Bf109 E-3

€26.99

Article number: 300025200 Product: 1/48 Swiss Bf109 E-3 ★This special edition kit allows recreation of one of the Bf109 E-3 aircraft operated by Swiss forces during and after WWII. ★Includes markings to recreate the bright Swiss flag designs that were applied to stop them being mistaken for German Luftwaffe aircraft. ★Comes with two marking options in total. ★Features a full colour painting guide to assist in the creation of your masterpiece, plus a dedicated background story. ★Comes in a white package with printed color product label ★Choose open or closed canopy when assembling. ★Includes a pilot figure to add an extra level of detail to your model

Plus
1:32 Bo.F-15E Strike Eagle Bunker Buster

Échelle 1:32

1:32 Bo.F-15E Strike Eagle Bunker Buster

€128.00

Article number: 300060312 Product: 1:32 Bo.F-15E Strike Eagle Bunker Buster About the Boeing F-15E Strike Eagle w/"Bunker Buster" The McDonnell Douglas F-15 Eagle is regarded as one of the most capable twin-engine air-superiority fighters in the world today. Ever since its maiden flight in July 1972, this record breaking Mach 2.5 fighter has been a yardstick for jet fighter design. In the early 1980's, the Air Force requested McDonnell Douglas to modify their F-15 fighter into a dual-role aircraft to be known as the F-15E "Strike Eagle" for use as an air-to-air fighter, and for air to ground attack missions. This new version was designed to penetrate deep into enemy territory unescorted, and strike military targets with pinpoint accuracy. The strike eagle employs two highly reliable Pratt & Whitney F100-PW-229 engines and was designed specifically as a two-person crew of pilot and weapons system officer. The LANTRIN (Low Altitude Navigation and Targeting Infra-Red for Night) system enables the Strike Eagle to operate at night and in bad weather. The Strike Eagle can also be employed with up to an 11-ton payload and can carry the GBU-28 Bunker Buster, a guided bomb developed to destroy strengthened underground bunkers. The Strike Eagle was first deployed in December 1989. During the Gulf War in 1991, 2 squadrons of 48 F-15E Strike Eagles demonstrated their power as multi-purpose fighter/attack planes. About the model The popular F-15E Strike Eagle (item 60302) was released in 1993. However, since this items release, the F-15E has come to be equipped with a variety of newly developed weapons systems. Following the changes in times and aviation fighting technology Tamiya has modernized its kit to feature accurate replicas of all the latest weapons systems employed by the F-15E Strike Eagle. Includes parts for replication of the GBU-28 "Bunker Buster", as well as AGM-130 and JDAM guided bombs, and ARAAM air- F-15E w/Bunker Buste

Plus
1:32 F-15 JASDF EAGLE

Échelle 1:32

1:32 F-15 JASDF EAGLE

€128.00

Article number: 300060307 Product: 1:32 F-15 JASDF EAGLE This plastic assembly kit reproduces the F-15J Eagle, which has protected Japanese skies as the main fighter of the Japan Air Self-Defense Force (JASDF) since it was first introduced in 1982. The distinguishing features of the F-15J, such as the mass balances on the vertical fins, antennas under the nose, and cockpit layout, have all been faithfully replicated. The incorporation of screws and die-cast metal landing gear legs ensure a strong model. At the same time, the radome and access hatches may be posed open to reveal exquisite details. The air intakes are movable while the canopy and airbrake may be posed in either open or closed positions. Comes with parts for an array of weapons, one pilot figure, and markings to depict aircraft from eight JASDF units. F-15J Eagle

Plus
1:32 F4U-1 Corsair "Birdcage"

Échelle 1:32

1:32 F4U-1 Corsair "Birdcage"

€114.00

Article number: 300060324 Product: 1:32 F4U-1 Corsair "Birdcage" The F4U-1 Corsair® was a truly unique aircraft, with a powerful 2,000hp engine and a massive 4m propeller, not to mention the highly characteristic inverted gullwings. In October of 1940, it was the first American fighter to achieve a speed of 400mph (around 640kph). Initial production models of the aircraft featured a striking canopy called the "Birdcage". The aircraft took part in operations from February 1943, and with its powerful 12.7mm machine guns proved to be a formidable opponent for the Japanese Zero Fighters. In order to capture the aircraft as accurately as possible, Tamiya designers not only inspected, measured and examined the real aircraft at five different museums across North America, they were also given access to Northrop-Grumman's blueprints. The result is a highly detailed and precise 1/32 scale model of the F4U-1 Corsair.

Plus
1:32 North American P-51D Mustang

Échelle 1:32

1:32 North American P-51D Mustang

€114.00

Article number: 300060322 Product: 1:32 North American P-51D Mustang The P-51 Mustang is considered by many to be the best fighter aircraft of WWII. The P-51 Mustang came about when the British Purchasing Commission asked North American Aviation to produce the Curtiss P-40 for the RAF, but North American stated they could build something better. The P-51D is considered by many experts to be the definitive variant of the Mustang as it was the most widely produced. It featured a bubble canopy which gave the pilot superb all-round visibility as well as a heavier armament of six 12.7mm machine guns. Wing racks allowed the carriage of drop tanks to extend range or bombs for ground attack. P-51Ds were instrumental in helping the Allies gain air superiority over Europe, and after Germany's defeat, they continued their role as long-range escorts for B-29s attacking Japan. Many also saw service during the Korean War as fighter-bombers and a few even continued to serve with air forces of less developed nations until the 1980s.

Plus
1:32 P-51D / K Mustang Pacific

Échelle 1:32

1:32 P-51D / K Mustang Pacific

€143.00

Article number: 300060323 Product: 1:32 P-51D / K Mustang Pacific The P-51D Mustang incorporated advanced features such as a laminar flow wing and an efficient radiator design, and powered by the Packard-built Rolls-Royce Merlin V-1650 engine, it demonstrated superior highaltitude performance. The P-51D was equipped with a Hamilton Standard propeller as standard but shortages of the propeller led to the installation of Aeroproducts propellers on some P-51Ds built at North American's Dallas factory, and these were distinguished by the designation P-51K. Most of the P-51Ks saw combat in the Pacific Theater, although some were also sent to Europe. In addition to the fighter role, some P-51s were equipped with cameras and used as reconnaissance aircraft. Such aircraft which were converted from P-51Ds and P-51Ks were designated F-6Ds and F-6Ks respectively.

Plus
1:32 Supermarine Spitfire Mk.XVIe

Échelle 1:32

1:32 Supermarine Spitfire Mk.XVIe

€133.00

Article number: 300060321 Product: 1:32 Supermarine Spitfire Mk.XVIe A Case of a Good Bubble The legendary Supermarine Spitfire is often credited with saving England during WWII. Among its many variants was the Mk.XVI, which was a Mk.IX airframe that was powered by a Merlin 266 engine license-built by Packard Motor Car Company in the United States. Most Mk.XVIs featured the larger rudder and E Type wing with two 20mm cannons and two 12.7mm machine guns. With the introduction of the teardrop canopy, the rear upper fuel tank capacity was reduced to 33 gal. and that of the forward lower fuel tank was increased to 48 gal. to compensate. 1,054 Mk.XVIs were produced from September 1944 until July 1945. During the war, they were deployed on the European front and served as fighter-bombers. In the post-war period, the Mk.XVI was used by the RAF as well as the Belgian and Greek air forces until the early-1950s. About the Model 1/32 scale plastic assembly kit of the Spitfire Mk.XVIe. ★Overall Length: 302mm, Overall Width: 311mm. ★Distinctive features of the Mk.XVIe, including Packard Merlin 266 engine, E Type wing, teardrop canopy, and modified landing gear legs, are accurately reproduced. ★Canopy may be opened even after assembly. ★Features movable ailerons, rudder, and elevators. Flaps can be depicted in either up or down position. ★30 gallon drop tank, two 250lb bombs, and 3 types of markings included. ★Comes with 3 kinds of markings to depict the aircraft from Royal Air Force squadrons as well as the (Pilots) Refresher Flying Unit. ★2 pilot figures, 1 seated and 1 standing, are included.

Plus
1:32 US VOUGHT F4U-1A Corsair

Échelle 1:32

1:32 US VOUGHT F4U-1A Corsair

€133.00

Article number: 300060325 Product: 1:32 US VOUGHT F4U-1A Corsair This is a highly detailed model recreating the F4U-1A variant of the highly popular Corsair model. Newly-designed parts are included in the kit to accurately capture the modifications which distinguish it from the original F4U-1. The F4U-1A drew on the experience of Navy and US Marine Corps pilots' experience with the original aircraft, making modifications to further improve the performance of this legendary bird. One of the most noticeable alterations was the discarding of the "birdcage" cockpit and its extensive frame sections that hampered visibility; a semi-bubble canopy with minimal frame was installed instead, which improved the pilot's view and made it easier to land the F4U-1A. Additional upgrades included raising the pilot's seat 18cm to help with visibility, and later extending tail wheel struts by 16.5cm. A wedge shaped spoiler was added to the starboard wing to correct the tendency of the port wing to stall first and roll out of control. Such modifications contributed greatly to the F4U-1A's suitability for use from aircraft carriers; although by this time it had been passed over for that duty by the F6F Hellcat. Unlike its predecessor, the F4U-1A would later be used as fighter-bomber, and was given the capability of carrying a drop tank under the fuselage, plus a bomb rack for use on raids supporting ground troops. This combination of fearsome performance in the air and bombing capability made the F4U-1A a vital component as the Allied forces conducted their 'island hopping' strategy progressing through the Solomon Islands.

Plus
1:48 F4U-1D Corsair w/ 'Moto-Tug'

Échelle 1:48

1:48 F4U-1D Corsair w/ 'Moto-Tug'

€41.99

Article number: 300061085 Product: 1:48 F4U-1D Corsair w/ 'Moto-Tug' About the Vought F4U-1D Corsair w/ Moto-Tug The speedy Corsair debuted as the 1st US fighter plane to overcome the 400mph (644km/h) barrier. However the initial production version of this aircraft, the F4U-1 "Birdcage", was not without its problems. The port wing stall often gave the Corsair unstable landing, and the long nose and framed canopy hindered visibility. These weak points necessitated the development of improved versions such as the latter developed F4U-1A with 18cm raised cockpit and raised rear landing gear. The F4U-1D featured clear vision canopy (two side frames removed) and had two pylons under the center wing section that could carry up to a 1,000lb bomb payload. In 1944 the F4U-1D Corsair was formally deployed as a carrier based aircraft. Following the successful release of the 1/48 Messerschmitt Me262 A-2a w/ Kettenkraftrad, Tamiya is proud to present yet another aircraft/ground vehicle set: the 1/48 scale F4U-1D Corsair (Item 61061) with the all new 1/48 "Moto Tug." This kit is perfect for designing the ultimate U.S. Navy Scene Diorama. Aircraft Tug or "Moto-Tug" tractors, as they were nicknamed, were manufactured by Ford. The Ferguson Company modified these vehicles for ease of application in the U.S. Navy by lowering clearance, and reducing wheel diameter to make it more compact. A protective panel was also added. The double-tire version of this vehicle was the BNO-40, the single-tire version was the BNO-25. Tow bars from Moto Tugs would attach to the rear landing gear or main landing gear struts. These vehicles were active in towing U.S. Naval planes to runways and hangers. The kit will feature all new parts for recreation of rockets on outer section of wing, perfect for displaying in wing-folded position. In addition to the standing pilot figure of the previous kit, a pilot figure to be assembled leaning out of the cockpit (checking towing

Plus
1:48 Fieseler Fi156C Storch (Foreign AF)

Échelle 1:48

1:48 Fieseler Fi156C Storch (Foreign AF)

€59.99

Article number: 300025158 Product: 1:48 Fieseler Fi156C Storch (Foreign AF) The Fieseler Fi156 Storch was one of the Germany’s representative aircraft during WWII. It had a lightweight construction made up with a cloth-covered steel pipe airframe and wooden wings. Blessed with excellent STOL (Short Take-Off and Landing) performance, it was used for various duties such as liaison, spotting, and reconnaissance. The Fi156 was also used by a number of other countries such as Switzerland, Italy, and Hungary and some aircraft were used even after the war ended. About the Item • 1/48 scale plastic assembly kit. • The slim form of the Fi156 and features such as the canopy area and broad wing span have all been accurately reproduced. • Metal frame parts for wing and landing gear included. • Highly detailed cockpit features photo-etched parts for side panels and armor plate. • Engine cowlings can be detached even after assembly to showcase the detailed Argus As10C engine. • Boarding hatch can be depicted in either open or closed position while flaps can be depicted in either up or down position. • 5 marking options included to depict Swiss Air Force (x3), Italian Air Force (x1), and Hungarian Air Force (x1) aircraft. • Canopy masks also conveniently included.

Plus
1:48 Ger. Fieseler FIL156C Storch

Échelle 1:48

1:48 Ger. Fieseler FIL156C Storch

€73.99

Article number: 300061100 Product: 1/48 WWII Dt. Fieseler FIL156C Storch About the Fi 156 Storch Produced to meet a Luftwaffe requirement for a new liaison aircraft, the Fi 156 Storch was a light aircraft that had amazing STOL (Short Take-Off and Landing) capabilities. The design incorporated such practical features as folding wings, which allowed it to be easily transported, and landing gear shock absorbers that allowed it to land on rough surfaces. It was used in a variety of roles, including liaison, tactical reconnaissance, and air ambulance, and it was the aircraft that was involved in the daring rescue of Italian dictator Benito Mussolini. Field Marshal Erwin Rommel was also known to make heavy use of his Fi 156 for battlefield reconnaissance in North Africa. About the Model •Highly-detailed 1/48 scale assembly kit model of the Fieseler Fi 156 Storch. •Kit includes parts to replicate various versions of the Fi 156C, including fuel tank, skis, and 3 different types of canopies. •Clear canopy sides have been molded together with the fuselage halves for more realistic construction. •Important structural sections such as the wing spar and the landing gear struts are made from metal parts for enhanced realism and strength. •Includes 1 pilot and 1 commander figure. •Precision photo-etched parts such as cockpit panels, cockpit frame, and front seat also included.

Plus
1:48 Ger. Heinkel He162A-2 Salamander

Échelle 1:48

1:48 Ger. Heinkel He162A-2 Salamander

€36.99

Article number: 300061097 Product: 1/48 WWII Dt.Heinkel He162A-2 Salamander The Luftwaffe's Last Hope As the situation became more desperate for the German forces near the end of WWII, a call was made for a new inexpensive jet fighter that would be simple to produce and fly. In the amazingly short span of 3 months from drawing board to first flight of the prototype, Heinkel produced the small, sporty-looking He162. The lightweight fighter featured mainly wooden construction and was powered by a BMW003 turbojet, which made it the fastest jet fighter of WWII with its 838km/h top speed. Reaching combat units in late March 1945, the little fighter managed to record some combat successes despite the acute fuel and parts shortage. About the Model High-quality assembly kit display model of the He162 A-2 "Salamander" jet fighter. ★Length: 205mm, Width: 149mm ★Top-mounted BMW003 turbojet engine with parts for opened and closed engine bay covers to allow full display of internal details. ★Special dolly included to display the engine separate from the aircraft. ★Canopy can be posed in the open or closed positions, and the ejector seat is removeable. ★Includes 1 pilot figure and 4 types of markings.  

Plus
1:48 Ger. Nachtjäg. Heinkel Uhu He219

Échelle 1:48

1:48 Ger. Nachtjäg. Heinkel Uhu He219

€48.99

Article number: 300061057 Product: 1:48 Ger. Nachtjäg. Heinkel Uhu He219 The He 219 was arguably the Luftwaffe's best nightfighter during WWII and was notable for an extraordinary debut mission in June 1943 when a prototype shot down five RAF Lancaster bombers. This kit depicts the final production variant, the A-7, which was equipped with DB 603G engines for improved high-altitude performance. Distinctive features such as the slim fuselage, greenhouse-style canopy, and tricycle landing gear are all accurately reproduced. The cockpit interior even features an integrated nose weight to ensure the model stays balanced when displayed. Two crew figures and three marking options are also included.

Plus
1:48 Ger. V-1 Fiseler Fi103

Échelle 1:48

1:48 Ger. V-1 Fiseler Fi103

€12.99

Article number: 300061052 Product: 1:48 Ger. V-1 Fiseler Fi103 Powered by a pulse jet engine, the unmanned V-1 flying bomb developed by Germany during WWII would reach speeds of 640km/h, fly a certain distance, then crash and explode. This kit reproduces the simple form of this weapon and also includes parts to depict a transport trolley.

Plus
1:48 Jap. A6 M5C Type 52 Zero Fighter

Échelle 1:48

1:48 Jap. A6 M5C Type 52 Zero Fighter

€14.99

Article number: 300061027 Product: 1:48 Jap. A6 M5C Type 52 Zero Fighter About the A6M5c Type 52 Zero Fighter In April 1939, shortly after the first Japanese Zero began test trials, modification drawings were already taking place on the zero in the Mitsubishi design room, to keep pace with the anticipated long air war in the Pacific. After the initial superiority of the Zero over allied aircraft began to wane, due to new U.S. types being introduced, Mitsubishi was hard pressed to maintain a superiority. The introduction of the Grumman F6F and Chance Vought F4U, provided a need for more firepower, armor protection and capability led the combined companies of Nakajima and Mitsubishi to produce the A6M5 series of aircraft. Total production of the Type 52 series consisted of 10,449 aircraft of which Nakajima produced 6,570. It first entered combat in August 1943 at a time when the Japanese forces were withdrawing from previously held islands in the South Pacific. The type 52c was the last of the A6M5 series, and the most effective against Allied aircraft due to its armament configuration three of 13mm machine guns and two 20mm cannons. A total of 93 Type 52 and 52b zeros were field modified to "c" weapons configuration. The 7.7mm machine guns, housed in the cowling of the Zero since its first introduction, proved to be less effective during the latter stages of the conflict, due to the heavier armor protection of allied aircraft, and their self sealing fuel tanks. The 13mm weapon was greatly more effective; however, due to its increased weight, only one of them could be housed in the cowling and one in each wing. The 7.7 machine guns were removed from the cowling and one 13mm gun was mounted on the right hand side. This installation also made necessary the enlarging of the right hand projectile exit and cowling tube input, of the cowling, giving it an unbalanced look when viewed from the top.

Plus
1:48 US North American P-51D Mustang

Échelle 1:48

1:48 US North American P-51D Mustang

€26.99

Article number: 300061040 Product: 1:48 US North American P-51D Mustang About the North American P-51D Mustang 8th AF In April 1940, drawings were sketched in a New York City hotel room for a new fighter aircraft for the British purchasing Commission. This fighter, the North American NA73X, became one of the best fighter aircraft in the U.S. Army Airforce during World War II, and is known as the P-51 Mustang. Of the several variations of this famous fighter, the P-51D is generally accepted as the definitive Mustang and was the first production version with the "Bubble" canopy. More "D" model Mustangs were built than all other Mustang variants combined, with a total of 9,603 coming off production lines. 45 squadrons of the famed U.S. 8th Airforce, stationed in England were equipped with the P-51D, which could now escort and protect the heavy bombers all the way to and from targets on the European continent. There were several major changes that set the "D" apart form earlier Mustangs. One was the change from four .50 caliber machine guns to six, three in each wing. Another was to mount the guns upright which helped to eliminate a jamming tendency that occurred in the four gun system. Ammunition was increased to 400 rounds per inboard gun, and 270 rounds for each of the other four. Underwing pylons were strengthened to carry the 110 or 165 gallon auxiliary drop tanks or 1,000 lb bomb. P-51D Mustangs went to fight in the later Korean conflict and it last flew combat in 1956 in the deserts to the Middle East, when Israel used Spitfires, Messerschimitts and Mustangs together in the Mid East conflict.

Plus
1:48 WWII Douglas A-1J Skyrider USAF

Échelle 1:48

1:48 WWII Douglas A-1J Skyrider USAF

€37.99

Article number: 300061073 Product: 1:48 WWII Douglas A-1J Skyrider USAF About the Douglas A-1J Skyraider U.S. Air Force Also going by the names Dauntless II, AD, A-1 Able Dog, and Spad, the Douglas Skyraider saw almost 30 years of service. The Skyraider's development started in June 1944. Not completed in time for WWII, its first combat came with the outbreak of the Korean War in June 1950. The first production version to roll out of the Douglas factory was designated the AD-1. Twelve years and seven versions later, over 3200 Skyraiders had been produced. Among those, the AD-6 version, also known as "Able Dog Six", was produced in the greatest numbers. The next and final version of the Skyraider, the AD-7, was extremely identical to the AD-6, but it had reinforced wing spars and wing fittings, as well as the strongest landing gear of all the variants. The AD-7 housed the new wright R-3350-26WB engine, which enabled a top speed of 285 knots. Due to a directive to standardize the designation of Navy and Air Force aircraft, AD-6 and AD-7 became known as A-1H and A-1J respectively. In 1965, when U.S. air operations in Vietnam became more aggressive, literally hundreds of Skyraiders, including the A-1J, were deployed to the 14th and 56th Special Operations Wings (SOW). Armed with Mk.82 and Mk.117 bombs, 20mm wing-mounted cannons, and rocket launchers, the Skyraiders were used in a wide variety of combat missions.

Plus
1:48 WWII Dt. Focke Wulf Fw190 A-3

Échelle 1:48

1:48 WWII Dt. Focke Wulf Fw190 A-3

€25.99

Article number: 300061037 Product: 1:48 Ger. Focke Wulf Fw190 A-3 The Focke-Wulf Fw 190 served alongside the Messerschmitt Bf 109 to defend Germany from the mid stages of WWII to the end of the war. This kit reproduces the A-3 variant of the Fw 190, which outclassed the RAF's Spitfire Mk.V when it entered service. The aircraft's characteristic radial engine features fine cooling fin and exhaust details. Three marking options, including an aircraft flown by German ace Hans Hahn, are included.

Plus
1:48 WWII Ger.Floatpla.Arado Ar.196A I/T

Échelle 1:48

1:48 WWII Ger.Floatpla.Arado Ar.196A I/T

€65.99

Plus
1:48 WWII Messerschmitt BF109E-4/7 Trop

Échelle 1:48

1:48 WWII Messerschmitt BF109E-4/7 Trop

€25.99

Article number: 300061063 Artikelbezeichnung: 1:48 Ger. Messerschmitt BF109E-4/7 Trop The Messerschmitt Bf 109E was the Luftwaffe's mainstay fighter in the early stages of WWII. This kit depicts the E-4, which was produced from May 1940 and saw extensive action during the Battle of Britain, and the E-7, which was fitted with a drop tank for increased range. The angular form of the aircraft has been accurately reproduced complete with details such as a canopy that may be assembled in open or closed position, a rack for the E-7's drop tank, and the Trop version's air intake with sand filter. One pilot figure and three marking options are included.

Plus
1:48 WWII US Re.P-47D Thunderb.Razorback

Échelle 1:48

1:48 WWII US Re.P-47D Thunderb.Razorback

€43.99

Article number: 300061086 Product: 1:48 US Re. P-47D Thunderb. Razorback In 1943, the 8th Air Force was launching raids on Germany with its B17 and B24 from England. The aim was to destroy German main production factories. Unfortunately, losses during theses missions were very heavy and it became urgent to develop a fighter able to escort the bombers over enemy soil. The limited ranges of the Spitfire and P-38 Lightning did not make these fighters able to go further than Paris, leaving the bombers alone to fend for themselves for the rest of the flight. With the development of the P-47, this problem was overcome. The P-47 was the first single-seated fighter to be equipped with a supercharger, allowing it to fly at the same high altitude as the bombers. This high-flying fighter was armed with eight 12.7mm machineguns that proved very useful in the intense fighting that occurred in the European skies. Equipped with drop tanks for longer range, the P-47D was then able to escort the bombers all the way to the German border. The Thunderbolt also allowed many Allied pilots to become Aces. Bomber crews plagued day after day by intensive German interceptions, would remark that the presence of the P-47 was of great help.

Plus
1:48 WWII USN Douglas A1-H Skyraider

Échelle 1:48

1:48 WWII USN Douglas A1-H Skyraider

€36.99

Article number: 300061058 Product: 1:48 USN Douglas A1-H Skyraider About Douglas A-1H Skyraider U.S. Navy During 1943 the U.S. Bureau of Aeronautics considered to combine the tasks of torpedo bomber and dive-bomber into one. Several aircraft manufacturers, such as Douglas and Martin, were requested to develop a large, single-seat attack aircraft. According to the requirement, Douglas Skyraider, was developed by Douglas Aircraft Company, Inc. The development was started in early July 1944, and all night efforts of engineers made the first prototype's first flight possible already on March 18, 1945. Despite the short period of the development, flight trials proved the airframe's flight characteristics satisfactory and the aircraft was rated very highly. In May 1945 a letter of intent for 598 production was signed. The name "Skyraider" was officially approved for the aircraft in February of the following year, and the distribution to units was started at the end of the same year. The Skyraider was powered by Wright R3350 radial engine yielding 2,800 horse power and equipped with three large dive brakes on the fuselage. The Skyraider had a number of types, from the AD-1 to AD-7, recording grand total number of production of more than 3,000. Among them, AD-6 was the most produced variant. The AD designation for the Skyraider was changed in 1962, and the AD-6 became the A-1H. Noted for its durability and a large capacity for external stores, the Skyraider was well liked by its pilots and crewmen.

Plus
1:72 US F-16CJ Fighting Falcon

Échelle 1:72

1:72 US F-16CJ Fighting Falcon

€26.99

Article number: 300060786 Product: 1:72 US F-16CJ Fighting Falcon The Lockheed Martin F-16 Fighting Falcon is a single-engine multirole fighter aircraft originally developed by General Dynamics for the United States Air Force (USAF). It was designed as an air superiority day fighter and later it evolved into a successful all-weather multirole aircraft. As of 2012, over 4,500 aircraft have been built since production was approved in 1976. In 2004 and in 2008 Tamiya’s model designers captured this iconic fighter in 1/48 scale and in 1/32 scale respectively, which both models received tremendous accolades from the modeling community and the industry press. The third release continues Tamiya’s tradition of excellence with this 1/72 cale model. This version is specifically of the F-16CJ (Block50) and it shares some of the same level of details as its larger counterparts. It is the perfect scale model for modelers confined to smaller display areas to show off their hard modeling work.

Plus
1:72 USA F. BELL X-1 MACH BUSTER

Échelle 1:72

1:72 USA F. BELL X-1 MACH BUSTER

€11.99

Detailed Plastic Kit of model USA F. BELL X-1 MACH BUSTER in scale 1:72

Plus
Kawanishi Shiden Type 11

Échelle 1:72

Kawanishi Shiden Type 11

€12.99

Article number: 300060768 Product: 1/72 Kawanashi Shiden Type 11 Evolving from the Kawanishi N1K1 "Kyofu" floatplane, the Imperial Japanese Navy's N1K1-J Shiden had a unique pedigree amoung WW2 landplane fighters of the world. In January 1942, the Kawanishi Aircraft firm began adaptation of the Kyofu into a land based fighter, strictly as a private venture. This project was soon officially authorized under the designation N1K1-J, with the first prototype flying in December 1942. The airframe was basically the same as its predecessor, with main landing gear and tall wheel replacing the floats. In place of Kyofu's Mitsubihi Kasei engine, a more compact and powerful Nakajima Homare engine was installed. Excellent performance and superb maneuverability was achieved using this engine, however it brought about serious problems. In order to use all of the available power in the engine, a large diameter propeller was required. This required unusually long main landing gear legs, because of the midwing configuration. This caused difficulties in the landing gear retraction system. Kawansihi engineers managed to solve the problem by introducing telescopic main landing gear legs. The complex gear system and unreliability of the engine, plagued the N1K1-J throughout its career, until the introduction of the improved, low-wing N1K2-J Shiden-Kai. About 1,000 N1K1-J fighters were produced and were active around the Phillipine islands, Formosa, Okinawa and over the Japanese Island of Honshu. Detailed Plastic Kit of model Kawanashi Shiden Type 11 in scale 1:72

Plus
North American P-51D Mustang

Échelle 1:72

North American P-51D Mustang

€13.99

Detailed Plastic Kit of model P-51D Mustang North American in scale 1:72

Plus
P-47D Thunderbolt Bubbletop

Échelle 1:72

P-47D Thunderbolt Bubbletop

€18.99

Article number: 300060770 Product: 1/72 P-47D Thunderbolt Bubbletop About the P-47D Thunderbolt One of the most famous planes of WWII, the P-47D Thunderbolt was an outstanding single seat fighter plane excelling in high-altitude bomber escort and low-altitude ground attack. The P-47D featured a turbo-supercharged engine and was active on both the European and Pacific fronts. To solve the problem of insufficient visibility of earlier models, later Thunderbolt models were redesigned with a transparent bubble canopy, leading to the birth of the "Bubbletop". About the Model •Following the successful release of the P-47D "Razorback", Tamiya now introduces its successor, the "Bubbletop" to the 1/72 scale War Bird Collection. •At just 153mm it is the perfect size for collecting •Fuselage and canopy designed with all new parts to accurately represent bulky size •Loads of accessories including 500 pound bombs and M10 rocket launchers •Decals for 2 types of markings, including the 8th Air Force, 78th Fighter Group.

Plus
P-47D Thunderbolt Razorback

Échelle 1:72

P-47D Thunderbolt Razorback

€18.99

Article number: 300060769 Product: 1/72 P-47D Thunderbolt Razorback The P-47 was the first single-seated fighter to be equipped with a supercharger paired with a 2000hp engine, allowing it to fly at the same high altitude as bombers. Armed with eight 12.7mm machineguns, the Thunderbolt, with the P-51 Mustang, constituted the main fighters of the US Army Air Force. This is the representation of P-47D early production that was nicknamed "razorback" because of the shape of its upper fuselage behind the cockpit. The P-47D was a high-speed, high-altitude capable fighter and escorted the allied bombers that were conducting raids over Germany. Its 1-ton payload and its robustness made the Thunderbolt the perfect aircraft for ground attacking missions. About the Model •Sharp design of rear fuselage accurately reproduced. •Unique belly shape perfectly replicated thanks to left-right symmetrical construction. • Joining beams used to attach wings to fuselage, ensuring accurate wing angle. •Loads of accessories including 2 x 108 gallon tanks, 2 x 500 pound bombs and 2 x M10 rocket launchers. •For extra accuracy, kit comes with two different propellers to match decal markings. •Decals for 2 fighter groups, including one from Europe and one from the Pacific.

Plus
Republic F-84G Thunderjet

Échelle 1:72

Republic F-84G Thunderjet

€13.99

Article number: 300060745 Product: Republic F-84G Thunderjet Towards the end of World War II, information about advanced aeronautical technology was captured in Germany by the U.S. Forces. One of them was an analysis of the studies carried out by Dr. Alexander Lippisch on delta winged aircraft. Based upon the information, the Douglas firm developed the F4D Skyray, the only operational interceptor with delta wings in the U.S. Navy. Starting the design in 1947, Douglas was awarded a contract for the construction and testing of two prototypes in December 1948. The first prototype took off on its maiden flight in January 1951. The second prototype flew shortly thereafter, and the airframe set two new world records, absolute speed record of 1,211 km/h and 100km closed course record of 1,171km/h, in October 1953. Having numerous improvements and refinements, the first production F4D-1 made its maiden flight in June 1954 and entered squadren service in April 1956. The distinctive 50 degree sweptback wings with round tips were equipped with leading edge slats and trailing edge elevons. A set of trimmers were installed on the inboard trailing edges of the wings. The outer portions of the wings could be folded upwards by oil pressure for carrier stowage. Although the Skyray never saw any combat, it proved its high capability as an interceptor with numerous world records and scramble actions in Taiwan in response to crises in the late 1950's. Detailed Plastic Kit of model Republic F-84G Thunderjet in scale 1:72

Plus
SEIRAN

Échelle 1:72

SEIRAN

€11.99

Article number: 300060737 Product: 1:72 SEIRAN This is a plastic model assembly kit of the Japanese Navy's special attacking machine, Harumi, developed for an unprecedented strategy of starting from catapult of a large submarine and launching a surprise attack. Faithfully reproduced a unique style fitted with a tightened nose or twin float equipped with an air-cooled engine. 800kg Movement dollies are also convenient for bombs and exhibitions. I printed a decal for the machine number of 6 aircraft. It would be interesting to explore the sunny storm that ended the war before the actual battle participation, by modeling its unknown ability. Detailed Plastic Kit of model SEIRAN in scale 1:72

Plus
Skyray

Échelle 1:72

Skyray

€12.99

Article number: 300060741 Product: 1/72 Skyray Towards the end of World War II, many information about advanced aeronautical technology were captured in Germany by the U.S. Forces. One of them was an analysis of the studies carried out by Dr. Alexander Lippisch on delta winged aircraft. Based upon the information, the Douglas firm developed the F4D Skyray, the only operational interceptor with delta wings in the U.S. Navy. Starting the design in 1947, Douglas was awarded a contract for the construction and testing of two prototypes in December 1948. The first prototype took off on its maiden flight in January 1951. The second prototype flew shortly thereafter, and the airframe set two new world records, absolute speed record of 1,211 km/h and 100km closed course record of 1,171km/h, in October 1953. Having numerous improvements and refinements, the first production F4D-1 made its maiden flight in June 1954 and entered squadren service in April 1956. The distinctive 50 degree sweptback wings with round tips were equipped with leading edge slats and trailing edge elevons. A set of trimmers were installed on the inboard trailing edges of the wings. The outer portions of the wings could be folded upwards by oil pressure for carrier stowage. Although the Skyray never saw any combat, it proved its high capability as an interceptor with numerous world records and scramble actions in Taiwan in response to crises in the late 1950's. Detailed Plastic Kit of model Skyray in scale 1:72

Plus
1/48 F-14A Tomcat

Échelle 1:48

1/48 F-14A Tomcat

€95.00

Article number: 300061114 Product: 1/48 F-14A Tomcat The Definitive 1/48 Scale F-14A Tomcat From its first test flights in 1970 through to its retirement in 2006, the F-14 Tomcat is a carrier-based fighter that has captured the imagination; its variable sweep wing allowed automatic adjustment for optimum performance and an impressive combination of speed and manouverability. It had a powerful AN/AWG-9 fire control system that could use AIM-54 Phoenix missiles to take on multiple targets from range. 477 of the 632 Tomcats supplied to the U.S. Navy were the early F-14A variant; their delivery to units began with carrier squadrons in 1973, and its combat debut was in the 1975 evacuation from Saigon. It was later in action in conflicts in Libya, Iraq and Afghanistan. Seventy-nine F-14As were also supplied to Iran before the 1979 Islamic Revolution and some still remain in service today. About the Model ★This is a 1/48 scale plastic model assembly kit of the Grumman F-14A Tomcat. Fuselage length: 398mm, Maximum Wingspan: 408mm. ★Designed with access to real F-14A Tomcats for superlative accuracy. ★Features moving depiction of variable sweep wing. ★2 sets of parts - interchangeable after completion - depict sealing plates and air bags with wing in fully swept and fully forward positions. ★Slide molding was used to ensure highly realistic canopy, air intake side and fuselage side sections. ★Poly caps allow movement of horizontal stabilizers. ★The model offers a choice of parts to depict open or closed engine afterburner nozzles. ★Separate parts are included to depict the fuel probe on the right of the nose, and the ladder on the left. ★Comes with two U.S. marking schemes and one for the Islamic Republic of Iran Air Force.

Plus
1:100 Space Shuttle Atlantis

Échelle 1:100

1:100 Space Shuttle Atlantis

€59.99

Article number: 300060402 Product: 1/100 Space Shuttle Atlantis NASA's space shuttle was first launched on April 12, 1981 and the fleet has accomplished numerous historic missions throughout their 30 years of service. The spacecraft conducted the latest research and played an important role in building the largest structure in space thus far, the International Space Station. The final space shuttle mission ended on July 21, 2011 with the flight of the Atlantis and the shuttle fleet is now destined for public display in museums across the United States.

Plus
1:32 A6M5 Zero Model 52 (Zecke)

Échelle 1:32

1:32 A6M5 Zero Model 52 (Zecke)

€114.00

A6M5 Zero Model 52 (Zeke)

Plus
1:32 DeHavilland Mosquito FB MK.VI

Échelle 1:32

1:32 DeHavilland Mosquito FB MK.VI

€195.00

Article number: 300060326 Product: 1:32 DeHavilland Mosquito FB Mk.VI The "Wooden Wonder" makes an appearance in highly impressive 1/32 scale! That was the nickname given to the De Havilland Mosquito series of aircraft, an ingenious and beautiful design which saw the versatile airplane made almost entirely of wood. By the late 1930s, when design work on the Mosquito started, metal was the overwhelmingly favored medium. However, the Mosquito's designer foresaw that metal would become a precious resource in the probable war ahead; what was more, his highly lightweight wooden aircraft would be able to outrun heavier metal opponents. Constructed mainly from balsa wood sandwiched between sheets of birch, the Mosquito was originally designed as a weaponless bomber; once the armed forces and designers realized that the aircraft could withstand enemy fire even if it was caught, a number of variants were produced. The FB Mk.VI debuted in Spring 1943: this fighter-bomber variant packed four 7.7mm machine guns in the nose, plus four powerful 20mm autocannons and the ability to mount four 500lb bombs. Its outstanding speed and range ensured that the FB Mk.VI was used in a range of missions, including raids on important targets and infrastructure in the German homeland. It is often said that, until the advent of the Messerschmitt Me262, the German Luftwaffe did not have an adequate response to the "Mossie."   Warning! Not suitable for children under 14 years.

Plus
1:32 F-4E PHANTOM II EARLY PROD.

Échelle 1:32

1:32 F-4E PHANTOM II EARLY PROD.

€138.00

Article number: 300060310 Product: 1:32 F-4E PHANTOM II EARLY PROD. About the McDonnell Douglas F-4E Phantom II Early Production The F-4E came into production as an improved version of the F-4C/D and was to be the most advanced model of the Phantom series. After elongating the fighter's nose and installing a more compact radar, the solid-state Westinghouse AN/APQ-120, the installation of a nose-mounted gun became possible and a 20mm M61A1 6 barrel Vulcan gun pod was employed. The Vulcan 20mm cannon, with its ammunition drum of approximately 640 rounds, was capable of firing 4000-6000 rounds a minute and proved reliable in air-to-ground and close quarters aerial combat. F-4E made its first flight in June 1967 and entered the rising conflict of the Vietnam War in November 1968 when the first F-4E's reached Korat in Thailand and joined up with the 469th Tactical Fighter Squadron. By the time of the cease-fire of 1973 the F-4E was credited with a total of 21 MiG kills, 5 brought down by gunfire alone. About the Model •Assembly kit of the early production version of the F-4E Phantom II main fighter of the U.S. Airforce. •Scale: 1/32, fuselage length: 600mm, wingspan: 368mm. The intrepid form of the F-4E Phantom with its characteristically elongated nose, has been accurately reproduced. •Fuselage has been molded as one piece with intricate areas faithfully recreated. Main pieces can be fastened to fuselage with screws. •Plane's nose can be reproduced with clear parts to allow viewing of the details of the 20mm M61A1 6 barrel Vulcan gun pod and AN/APQ-120 radar after model assembly. •Exquisite detail of cockpit and instrument panels portrayed in superb detail. Canopy can be assembled in the open or closed position. •Landing gear reproduced with dye-cast parts and tires are recreated with real rubber. •Parts for recreation of full armament, such as air-to-air missiles, are included in kit. Kit also

Plus
1:32 F-4J PHANTOM II MARINES

Échelle 1:32

1:32 F-4J PHANTOM II MARINES

€119.00

Article number: 300060308 Product: 1:32 F-4J PHANTOM II MARINES About the McDonnell Douglas F-4J Phantom II Marines When test pilot Robert C. Little prepared to take off in the YF4H-1 prototype on May 27, 1958, few onlookers could have guessed at the success story yet to unfold. Over thirty years from that faithful day, the successors of that prototype, the Phantom series of aircraft, would be protecting the skies over the free world and see adoption by eleven nations including the U.S. Navy, Air Force and Marines. The Phantom II was developed by McDonnell Douglas and first pitted against Vought's F8U-3 Crusader III to see which aircraft would be the Navy's next main carrier-borne fighter. In 1959, the selection was made in favor of the robust Phantom II. The early production model, the F4H-1F, underwent various tests and training exercises, eventually leading to the F4H-1 model, which was deployed to several Navy and Marine divisions. In 1962, in efforts to unify the names of Navy and Air Force aircraft, the F4H-1F and F4H-1 became designated the F-4A and F-4B respectively. Just after its adoption by the Navy, the Phantom II showed the world what it was made of, breaking record after record, including top-speed, altitude, and time-to-climb. To top off these results, the U.S. Navy ran Project LANA, a transcontinental speed race. The roman L stood for the number 50, for "50th Anniversary of Naval Aviation". The contest was to demonstrate the Phantom's shocking speed and reach. Based on this impressive track record, and on comparative tests against Air Force fighters at the time, it was decided that the next main fighter of the Air Force would also be the Navy's Phantom II. The F-4B version was specially tailored to the needs of the Air Force, and became designated the F-4C. Further improvements to that aircraft resulted in the F-4D model. The Navy continued to make improvements to the Phantom II. Mounting the F-4B wi

Plus
1:32 Grumman F-14A Tomcat Black Knights

Échelle 1:32

1:32 Grumman F-14A Tomcat Black Knights

€143.00

Article number: 300060313 Product: 1:32 Grumman F-14A Tomcat Black Knights About the Grumman F-14A Tomcat "Black Knights" Ever since its first flight in 1970, the U.S. Navy's F-14 Tomcat has been one of the best top Air Defense Fighter. From 1990, in addition to its role as an interceptor, the F-14A, noted for its long range and superior weapons systems was designated as an air-to-ground strike plane. With this new role, the Tomcat was fitted with a new weapons arsenal. Since 1996, the F-14A employs the AN/AAQ-14 targeting pod, referred to as the LANTIRN. This targeting pod gives the F-14A precision bombing capability by procuring targets for nose-mounted infrared laser or other laser guided weapons. The AN/AAQ-14 targeting pod contains a high-resolution, forward-looking infrared sensor (which displays an infrared image of the target to the pilot), a laser designator-rangefinder for precise delivery of laser-guided munitions, target tracking software, and more. The LANTIRN, combined with GBU-16 and GBU-24 guided bombs, enables precision striking with a minute margin of error from several meters down to tens of centimeters. This precision can be realized at long-range. The VF-154 Black Knights is attached to the USS Kittyhawk, homeported at Yokosuka Harbor, Japan. The Black Knights were formed after WWII, and were deployed to both the Korean and Vietnam War. F-14A were employed with the VF-154 from 1984, and used extensively in Operation Desert Shield during the Gulf War in 1990. About the model • Fighter-Bomber Grumman F-14A Tomcat plastic assembly kit. • 1/32 Scale •Overall length: 598mm, Overall width: 612mm. • The form of the aircraft has been accurately rendered. • Kit employs metallic parts and screws to make the wing movable. • A full range of armament including Phoenix missiles,   GBU-16 and GBU-24 laser guided bombs are provided as well   as a AN/AAQ-14 LANTIRN targeting pod. • Includes 3 figures, 2 pilots and a catapult officer, and decals for   5 aircraft. 

Plus
1:32 Lockheed Mar.F-16CJ Fighting Falcon

Échelle 1:32

1:32 Lockheed Mar.F-16CJ Fighting Falcon

€143.00

Article number: 300060315 Product: 1:32 Lockheed Mar.F-16CJ Fighting Falcon This is the first ever 1/32 scale F-16 model to replicate the characteristic large air intake duct, nicknamed "Big Mouth". The F110-GE-129 jet engine is also replicated in precise detail, and can slide into place on a hook and rail system exactly like the actual aircraft. The entire engine can also be displayed outside the aircraft using the included cart. This model achieves a level of accuracy only possible in such a large-scale work. The upper surfaces of the wings are molded to the main body of the plane in one single piece, creating a "Blended Body" which artfully depicts the F-16's beautiful, streamlined form and proportions. The model features screw-mounted main body and die-cast landing gears with actual rubber tires for extra durability. This model makes use of the newly developed mini poly caps to ensure that missiles, ECM pod and external fuel tanks are removable and interchangeable even after assembly. This way, modelers can enjoy depicting different weapon configurations specific to various F-16 missions. Use of poly caps also enables trailing edge flaps, horizontal stabilizer fins and vertical tail fin flaps to move freely after assembly.

Plus
1:32 Mc Donnell DOUGLAS F-15 EAGL

Échelle 1:32

1:32 Mc Donnell DOUGLAS F-15 EAGL

€109.00

Art.Nr.: 300060304 Product: 1:32 Mc Donnell DOUGLAS F-15 EAGL About the McDonnell Douglas F-15C Eagle At one time during the missile boom years, the U.S. Air Force believed future air battles could be decided by air-to-air missiles rather than guns in the traditional dog-fighting manner. The need for air superiority weapons was relearned during the Vietnam Conflict and led to an Air Force requirement for an all-weather, single-seat, twin-engined fighter. This aircraft was to optimize counter-air operations. The U.S. Air Force requested several manufacturers to study and develop prototypes during the late 1960's under the FX program (Fighter Experimental). McDonnell Douglas was awarded a contract to develop the F-15 Eagle jet fighter in December 1969. The Eagle's advanced aerodynamic design greatly reduced drag at both the low and high lift configurations, and achieved superior maneuverability during varying flight conditions. Making its maiden flight in July 1972, it was deployed in November 1974 as the F-15A Eagle, and had been in active service since then. It is powered by two Pratt & Whitney F100 afterburning turbofan engines developed exclusively for the for the F-15, and is capable of speeds in the Mach 2.5 range. The F-15 can carry a heavy load of devastating weapons, including the internally mounted 20mm M61A-1 Vulcan cannon, with 940 rounds of ammo, the AIM-7 Sparrow radar guided missile and AIM9 Sidewinder short range air-to-air missile. In 1979 an upgraded version of the Eagle was introduced as the F-15C. One notable change was the increase in fuel capacity, but even more fuel was made possible by the conformal fuel tanks, which snuggle between the wings and up against the jet inlet ramps. This increase in fuel capacity enables the Eagle to expand long range operations, such as escorting AWACS and strike aircraft to their targets. The Landing gear has been reinforced to accept the extra fuel weight, al

Plus
1:32 Mc Donnell Douglas F-4J Phantom II

Échelle 1:32

1:32 Mc Donnell Douglas F-4J Phantom II

€114.00

Article number: 300060306 Product: 1:32 Mc Donnell Douglas F-4J Phantom II Originally accepted for Navy service in 1958, the F-4 Phantom II went on to protect the skies of numerous Western nations. This kit depicts the F-4J variant which served with distinction with the Navy during the Vietnam War and was responsible for many victories over North Korean MiGs. The major assemblies are attached with screws and the one-piece fuselage and die-cast metal landing gear legs ensure superb strength. The canopy and air brake may be assembled in either open or closed positions as well. To top it off, an array of ordnance including Sparrow and Sidewinder missiles, two crew figures, and three marking options are also included.

Plus
1:32 Supermarine Spitfire Mk.VIII

Échelle 1:32

1:32 Supermarine Spitfire Mk.VIII

€138.00

Article number: 300060320 Product: 1:32 Supermarine Spitfire Mk.VIII The True Successor to the Mk.V The legendary Spitfire was the representative British fighter of WWII. Many variants were built and among these was the Mk.VIII, a variant developed to be the replacement for the RAF's previous mainstay Spitfire, the Mk.V. The Mk.VIII was fitted with a Rolls-Royce Merlin 60-series engine, larger radiators, and an air filter as standard. Other improvements included fuel tanks added in the wings, retractable tail wheel, shortened ailerons, and enlarged rudder and elevators. From the latter half of 1943, the Mk.VIII were deployed to the Mediterranean and Pacific Theaters and saw service with RAF, USAAF, RCAF, and RAAF units. About the Model 1/32 scale plastic assembly kit of the Spitfire Mk.VIII. ★Overall Length: 302mm, Overall Width: 383mm. ★Features of the Mk.VIII, including the retractable tail wheel, shortened ailerons, and wing fuel tanks, have all been accurately reproduced. ★You can select either retracted or deployed landing gear and tail wheel even after assembly. ★Parts to depict standard and extended wingtips included ★Features moveable ailerons, rudder, and elevators. Flaps can be depicted in either up or down position. ★Parts for 30 and 90 gallon fuel tanks included. ★Comes with 3 kinds of markings to depict the aircraft from USAAF, RAAF, and RCAF units. ★Comes with 2 pilot figures, 1 seated and 1 standing.

Plus
1:48 Bristol Beaufighter Mk.6

Échelle 1:48

1:48 Bristol Beaufighter Mk.6

€31.99

Article number: 300061053 Product: 1:48 BRISTOL BEAUFIGHTER MK.6 About the Bristol Beaufighter Mk.VI Bristrol's "Beaufighter" was one of the most successful and widely used twin engines fighter types during WW2. The first series production Beaufighter MK.1 entered service in September 1940. With its four nose-mounted 20mm cannons and six 7.7mm machine guns in the wings, this stub-nosed fighter became the most heavily armed aircraft in service with the RAF during the war. As the German Luftwaffe eventually turned to night bombing in autumn of 1940, priority was put on night fighters and the first operational Beaufighters were fitted with the Airborne Interception (AI) radar, which designated the Mk.1F (F was suffix for Fighter Command). Meanwhile, its rugged construction was thought ideal for long range fighting and escort duties, and the Mk.1C under the Coastal Command became ready for initial operations in late March 1941. Introduction of the more powerful, 1,670hp Hercules VI engines by late 1941 resulted in the Mk.VI. A 7.7mm machine gun being added in the observers canopy for rearward defense, and the horizontal tail plane was modified to have a 12 degree of dihedral, to eliminate the unstable characteristics observed on the preceding types. The Beaufighters saw active service not only above Europe but also in the Mediterranean, North Africa, Middle East and Pacific area. More than 5,900 Beaufighters of various types were produced.

Plus
1:48 Fairchild Republic A-10A Thunder.II

Échelle 1:48

1:48 Fairchild Republic A-10A Thunder.II

€33.99

Article number: 300061028 Product: 1:48 Fairchild Republic A-10A Thunder.II About the Fairchild Republic A-10A "Thunderbolt II" The need for close air support, on small pin point targets, was recognized early during the Vietnam conflict. Following an experimental development program begun in the early 1970's, the Fairchild Republic Industries A-10 Thunderbolt II was selected for production. The performance characteristics demanded were for operation on unimproved short fields, both high and low airspeed maneuverability, easy maintenance, long loiter times and range, excellent pilot protection, and a capacity for large mixed weapons loads. The appearance of the A-10 is remarkable while its performance is amazing. Known affectionately as the "Wart Hog" by its pilots, it's a large single seat aircraft, identified by a pair of TF-34-100A high bypass fan jet engines mounted high near the rear of the twin tailed fuselage. A few of the specifications are: Length 53' 4"; height 14'8", span 57'6"; maximum gross weight 47,400lbs, including 16,000lbs of external stores. Internal armament is the GAU-8/A 30mm Gatling cannon capable of 2100 or 4200 rounds per minute. It carries 1350 rounds of ammunition, a fire control head-up display, CRT TV monitor, laser spot seeker plus a diversified armament panel that can facilitate any operational need. The A-10 has been around since 1972, and has again proven its worth during the recent Gulf war.

Plus
1:48 Ger. Focke Wulf Fw190 D-9

Échelle 1:48

1:48 Ger. Focke Wulf Fw190 D-9

€25.99

Article number: 300061041 Product: 1:48 Ger. Focke Wulf Fw190 D-9 Following the successful entry of the Focke-Wulf Fw190A series of fighter aircraft over the English channel during the autumn of 1941, the German RLM requested high altitude version to complement the fighter fleet, and three projects were started. The Fw 190B used the B.M.W. 801 turbosupercharged radial engine and a pressurized cockpit, but very few of these were built. The Fw190C was powered by a 1,750hp Daimler Benz DB603A in-line engine, of which three prototypes were built. The third high altitude project was based on the Focke Wulf Fw190A airframe and powered by a Junkers engine. The fuselage was lengthened to accommodate the V-12 cylinder, liquid cooled, 1,750hp Jumo 213 engine, and made its initial flight during the winter of 1941 - 42. Five further prototypes were produced, plus small batch of Fw 190 D-Os were completed from standard production Fw 190A-7 airframes. These pre-production aircraft were followed by the Fw190 D-2 through D-8 designations. The Fw 190D-9 began production in June 1944, with early versions having the flat topped canopy, and from W. Nr. 210002 onwards having the Galland hood (blown canopy). It went into combat with the III/JG 54 "Grunherz" (Green Hearts) in September 1944, at Achmer, Germany, as top cover for the new Messerschmitt Me262 Jet fighters then entering service.

Plus
60 de 89 Article