5 22

Trier selon:

Meilleures ventes
  • Meilleures ventes
  • Nouveautés
  • Prix croissant
  • Prix décroissant
Filtrer

Filtrer
Prix
Catégorie
Marque
Marques & licences
Échelle
1:10 RC Blitzer Beetle 2WD (2011)

Modèles hors piste RC

1:10 RC Blitzer Beetle 2WD (2011)

€200.00

Plus
New
1:10 RC Neo Fighter Buggy DT-03

Modèles hors piste RC

1:10 RC Neo Fighter Buggy DT-03

€89.99

Article number: 300058587 Product: 1:10 RC Neo Fighter Buggy DT-03 The Neo Fighter Buggy is mounted on the easy to build DT-03 chassis platform. Intended as an easy-to-get-started model to encourage young drivers to enter the world of R/C, its intuitive yet tough design allows hassle-free assembly and gives less experienced users the opportunity to get to grips with R/C model composition and construction. DT-03 Chassis at a glance: The stylish slim-line form of this chassis stems from its lightweight yet durable monocoque frame, which features a longitudinally-positioned battery and the R/C equipment along the centerline for excellent balance. The combination of a long 287mm wheelbase and 4-wheel double wishbone suspension married to CVA oil dampers with long arms, allows the model to handle with stability on poor surfaces. Ribbed front and square spike rear tires provide ample grip, and the rear-positioned gearbox is sealed to protect from dust and dirt, with the built-in differential gear offering smooth cornering.   Warning! Not suitable for children under 14 years.

Plus
1:10 RC VW Bus Type 2 T1  Flower Power

Modèles sur piste RC

1:10 RC VW Bus Type 2 T1 Flower Power

€181.00

Article number: 300047453 Product: 1:10 RC VW Bus Type 2 T1 Flower Power Add some peace and love to your R/C life with this new color variation of our Type 2 (T1) model that turns it into a veritable Hippy wagon! The model is based upon the proven 2WD M-05 chassis. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 426mm, width: 195mm, height: 177mm. • The form of the 23-window Type 2 T1 bus is masterfully recreated in polycarbonate and pre-painted in PS-3 Light blue, with separate molded plastic parts included to create bumper, light cases and side mirrors. • A brand new sticker sheet with hippy-inspired designs is included to decorate the body. • The M-05 chassis is a compact unit based around a lightweight monocoque and offering great weight distribution with a low center of gravity. • This model uses the 239mm L wheelbase. • Comes with marking stickers to decorate the body. • The M-05 has a wide range of Hop-Up Option parts available to tune it.

Plus
1:10 RC X-SA Hornet

- 33%

Buggys RC

1:10 RC X-SA Hornet

€120.00

€180.00

Article number: 300046703 Product: 1:10 RC X-SA Hornet Another true Tamiya classic joins the new X-SA series in the form of the Hornet, a childhood dream for many early R/C fans and still a highly popular model in the modern day. About the Model • This is a 1/10 scale finished R/C model. Length: 400mm, width: 230mm, height: 150mm. Wheelbase: 251mm. • Finished polycarbonate body and wing are pre-painted in black, and have the iconic Hornet livery stickers applied. • The chassis comes ready-assembled. • Independent swing axle front suspension utilizes friction dampers, while rolling rigid axle rear suspension is fitted with oil filled dampers. • Sealed rear gearbox protects diff gear during off-road running. • Requires separately sold R/C equipment, battery pack and charger.

Plus
1:16 RC Panzer Leopard 2A6 Full Option

Chars RC

1:16 RC Panzer Leopard 2A6 Full Option

€931.00

Article number: 300056020 Product: 1:16 RC Panzer Leopard 2A6 Full Option Widely recognized as the best modern day Main Battle Tank (MBT), Tamiya introduces the latest German Leopard 2 tank, the Leopard 2 A6, to the 1/16 scale R/C tank series. Tamiya's biggest R/C tank ever, it's just like driving the real thing! About the Leopard 2 A6 Used by more than 10 European nations, Germany's Leopard 2 tanks are a perfect balance of firepower, protection, mobility and availability. With the Leopard 2A5 regarded as the most powerful tank in the world with superior protection and fire power, the latest Leopard 2, the 2A6, features an even more powerful weapon system. The Leopard 2A5 featured replaceable wedge shaped armor on the turret, improved PERI-R 17 panoramic Commander's sight with thermal vision, spall liner on the turret interior for protection against splinters, all-electric gun control and stabilization system for easy maintenance and reduced noise, GPS navigation system, electro-pneumatic driver's hatch and a CCD camera mounted on the rear of tank for high-speed reversing. The Leopard 2A6 featured improved firepower including a 55 caliber 120mm smoothbore main gun utilizing kinetic energy LKE II ammunition for higher muzzle speed and lethality. The 2A6 has been employed by the German 403 tank battalion since March 2001, and is scheduled to replace all German 2A5 tanks by 2006. The use of the 2A6 continues to spread throughout Europe with the Netherlands, Spain and Greece adopting the 2A6 for their main battle tank. With continued improvements the 2A6 continues to set new standards as the world's best MBT. R/C Leopard 2 A6 w/Option Kit   Warning! Not suitable for children under 14 years.

Plus
Brabham BT44B Martini

Modèles sur piste RC

Brabham BT44B Martini

€105.00

Article number: 300012042 Product: 1:12 Martini Brabham BT44B 1975 w/Ph-Et. Tamiya is delighted to announce the re-release of Item 12042 in our legendary 1/12 Big-Scale Racing Car Series. Motor Racing Developments designer Gordon Murray evolved the design of this car which features a monocoque body with a distinctive triangular cross-section and wedge shaped form. Also, Carlos Pace drove the car to a 1st place finish at the Brazil GP and namesake Carlos Reutemann did the same at the German GP, making it one of the more competitive cars in the field during the 1975 Formula One season. The model recreates the lively color scheme of the car, and has a realistic look with Martini and Goodyear logos. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

Plus
VW Karmann Ghia (M-06)

Modèles sur piste RC

VW Karmann Ghia (M-06)

€162.00

Article number: 300058677 Product: 1:10 RC VW Karmann Ghia (M-06) The ever-increasing stable of Tamiya R/C cars welcomes a brand new model of a classic car, with the addition of the Volkswagen Karmann Ghia to the line-up, on the RWD M-06 chassis. The Karmann Ghia was a stylish coupé based upon the same platform as the legendary Beetle. Its body was designed by Italian firm Ghia and manufactured by the German company Karmann. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 410mm, width: 182mm, height: 125mm. • The classic form of the car is accurately captured in lightweight and durable polycarbonate. Separate plated parts depict side mirror, bumpers and light cases. • Includes marking stickers, and masking stickers for use during the paint job. • The M-06 chassis features a rear-motor, RWD setup with a longitudinally-mounted battery pack and R/C units positioned on either side for optimum balance and a low center of gravity. • This model utilizes the 239mm wheelbase M-06L chassis. • Metal-plated wheels make for a great look, and are paired with front radial and rear super grip radials for superior stability and sharp handling. • A host of Hop-Up Option parts are available to customize the chassis to your driving needs. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

Plus
1:10 RC MB Unimog 406 U900 (CC-02)

Modèles hors piste RC

1:10 RC MB Unimog 406 U900 (CC-02)

€266.00

Article number: 300058692 Product: 1:10 RC MB Unimog 406 U900 (CC-02) • This is a 1/10 R/C model assembly kit. Length: 384mm, width: 196mm, height: 224mm. Wheelbase: 242mm. • The distinctive form of the Unimog is accurately depicted in durable polycarbonate, with separate parts included for side mirrors and fuel tank, plus a metal-plated front grille and emblem. • Includes block pattern tires, and red ABS wheels with a depiction of bead lock designs. • Propeller shafts (short: 76mm) are also included. • The CC-02 chassis is designed for a wide range of off-road scenes including rocky terrain, and its ladder frame is inspired by full-size vehicles and is the base for its superior durability. • A 4WD setup employs the motor longitudinally behind the front axle with separated gearbox and transfer case, and propeller shafts transmitting power to the differential gears front and rear. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

Plus
New
1:10 RC Subaru Brat 2WD PickUp Re.Re

Modèles hors piste RC

1:10 RC Subaru Brat 2WD PickUp Re.Re

€219.00

Plus
1:10 RC TT-02D Drift Spec Chassis

Modèles sur piste RC

1:10 RC TT-02D Drift Spec Chassis

€138.00

Article number: 300058584 Product: 1:10 RC TT-02D Drift Spec Chassis The TT-02 chassis is Tamiya's latest entry level 4WD full independent suspension assembly kit that offers ease of assembly and easy maintenance. The TT-02D is the Drift Spec variant that includes special parts to make it a fun to drive drifting machine. Includes Super Driftech tires (24mm width) which feature a special resin compound suited to drift driving. Includes full ball bearings and CVA (oil-filled) Super Mini shocks. Tamiya Sport-Tuned Motor and Aluminum heat sink is included. Brake disc-shaped wheel hubs (silver color) and battery holder (blue) are metal-plated parts. The TT-02 chassis offers 2 different wheelbases and tread settings without the addition of Option Parts. It also supports 10 different gear ratios. The skid-shaped underside of the bathtub type frame minimizes contact with the road surface. Body is not included in this kit. Purchase a separately-sold body of your choosing and fit it to the chassis.   Warning! Not suitable for children under 14 years.

Plus
1:10 RC X-SA Racing Fighter (DT-03)

Buggys RC

1:10 RC X-SA Racing Fighter (DT-03)

€143.00

Art.Nr.: 300046702 Product: 1:10 RC X-SA Racing Fighter (DT-03) Another new subject joins the new X-SA series, and it’s a modern classic: the Racing Fighter (original kit was Item 58628). The model is based upon the stylish, slimline DT-03 chassis. About the Model • This is a 1/10 scale finished R/C model. Length: 400mm, width: 244mm, height: 134mm. • Polycarbonate body and wing are pre-cut and pre-painted, with marking stickers applied. • Ribbed front and square spike rear tires ensure an accomplished off-road drive. • The DT-03 uses a tough monocoque frame. Big wheelbase (287mm) and tread (front: 221mm, rear: 208mm) measurements give it great performance on- and off-road! • Front arms have 25-degree skid angle for great off-road driving. • Features a sealed rear gearbox with internal gear differential unit, plus a dust cover for R/C equipment. • A wide range of option parts is available to tune and customize your DT-03 chassis car. • Requires separately sold R/C equipment, servo, battery pack and charger.

Plus
1:12 RC Lunch Box Re-Release

Modèles hors piste RC

1:12 RC Lunch Box Re-Release

€152.00

Article number: 300058347 Product: 1/12 RC Lunch Box Re-Release Another one of Tamiya's classic creations, the R/C Lunch Box (1st released, 1987) was loved for its camp appearance as much as for its R/C performance. The boxy minivan body raised up over monster truck wheels ensure that this R/C van will get attention anywhere you choose to drive it. Use the sides of the van as a canvas to paint your own original designs for the ultimate conversation piece! Lunch Box(2005) Alternativ: 300058546 1:12 RC Lunch Box Black Edition 300047402 1:10 RC Lunch Box Red Edition Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

Plus
1:14 RC 40ft.Container Semi-Trail.Maersk

Camions RC

1:14 RC 40ft.Container Semi-Trail.Maersk

€470.00

Article number: 300056326 Product: 1/14 RC 40ft.Container Semi-Trailer Maersk Cargo containers are used for shipping products and raw materials all around the world and ISO. This is a replica of a 40ft. regular height container which can be connected to any Tamiya's 1/14 scale Tractor Trucks.     Warning! Not suitable for children under 14 years.

Plus
1:14 RC Flatbed-Semi Trailer Kit

Camions RC

1:14 RC Flatbed-Semi Trailer Kit

€238.00

Article number: 300156306 Product: 1:14 RC Flatbed-Semi Trailer Kit This highly realistic 1/14 scale flatbead semi-trailer model is for use in combination with Tamiya's 1/14 R/C tractor truck. A scale appearance is achieved by using authentic components such as aluminum chassis/frame, wood-floored platform and actual chains.   Warning! Not suitable for children under 14 years.

Plus
1:14 RC King Hauler Black Edition

Camions RC

1:14 RC King Hauler Black Edition

€447.00

Article number: 300056336 Product: 1/14 RC King Hauler Black Edition This is a special edition of Item 56301 King Hauler, which was the first in the Tamiya series of 1/14 scale Tractor Trucks. The King Hauler was first introduced in 1993 and has been a favorite among R/C enthusiasts for many years. The body parts of this edition kit come pre-painted in Metallic Black straight from the factory floor. Tamiya's Tractor Truck Series come with authentic suspension with leaf springs. Power is provided by a 540-size front mounted motor, and 3-speed gear changes are possible via a 4-channel transmitter. Tamiya's Tractor Trucks may be connected to separately-sold semi-trailers.     Warning! Not suitable for children under 14 years.

Plus
1:14 RC Mercedes-Benz 1850L O-N Kit

Camions RC

1:14 RC Mercedes-Benz 1850L O-N Kit

€418.00

  Warning! Not suitable for children under 14 years.

Plus
1:16 RC Panzer Königstiger Full Option

Chars RC

1:16 RC Panzer Königstiger Full Option

€584.00

Article number: 300056018 Product: 1/16 RC Panzer Königstiger Full Option Tamiya continues to develop its 1/16 R/C Tank Series. The fourth full-option kit to make its appearance is the German Heavy Tank King Tiger. Not only can the model move forward and backward and turn with a great sense of power, but the turret can be rotated and the 88mm gun raised and lowered. To imitate the firing of the main gun and of front machine gun, light flashes while sound is heard. The sound of the engine has been recorded, with the assistance of the French museum of Saumur, from a real Maybach HL230-P30 engine of the only King Tiger kept in working condition in the world. Not only all stages of engine sound (idling through full throttle) but also all the metallic clanking of the tank tracks have been thoroughly recorded. During the second half of WWII, Zimmerit coating was applied on German tanks to protect them from the threat of magnetic mines. For this kit, the Zimmerit coating has been replicated with a unique relief printed seal. Thanks to this seal, you can now represent accurately a late war King Tiger with great ease. About the German King Tiger (Henschel Turret) The German Heavy Tank King Tiger made its appearance during WWII in 1944. The chassis front armor was 150mm thick with 80mm thick side armor and powered by a 700hp Maybach HL230-P30 engine. The Henschel and Porsche companies came up with rival turret prototypes. The first 50 tanks produced had Porsche turret whereas subsequent tanks were equipped with the Henschel designed production turret that featured many improvements over the first model. The King Tiger was armed with a 71-caliber 88mm gun that had enough power to pierce 150mm thick armor from 2000m away. Between The beginning of production in Summer 1944 and March 1945, 440 units were completed. Due to the havoc wreaked by the King Tiger during the final German offensive on the Ardennes front in December of 1944 R/C KING TIGER w/Option Kit   Warning! Not suitable for children under 14 years.

Plus
1:16 RC Panzer Tiger 1 Full Option

Chars RC

1:16 RC Panzer Tiger 1 Full Option

€584.00

Article number: 30006010 Product: 1/16 RC Panzer Tiger 1 Full Option Tamiya has put incredible power and versatility of the German Tiger I in your fingertips with this 1/16 scale, fully functional R/C tank. Just some of the many functions this tank is capable of have been recorded in the video clips below. First check out the firing of the main cannon, complete with true to life flash and cannon recoil. The shot is so powerful that it actually causes the tank itself to recoil, just like the full size Tiger I. Then, click on the next image to see the cannon rotate, tracking down the enemy and preparing to fire. Next is the firing of the authentically recreated 7.92mm MG34 machine gun! Finally, take a gander at how the Tiger I moves on its durable resin and metal tracks. *1/16 scale Radio Controlled Assembly Model Kit (overall length: 530mm, overall width: 232mm) *A four-channel RC unit is necessary to operate this kit. Two 7.2V Tamiya Racing Packs (or equivalent) and charger are also required. Powerful Engine Sound Just about every sound the real Tiger I made can be made on Tamiya's 1/16 scale Tiger I. When the tank is switched on, either a manual crank start sound, or an automatic engine start sound is heard. After your engine is turned over, its time to move the tank around. As you accelerate, the engine thundering increases just like the real Tiger I. Stop the tank, and the sound of authentic idling begins. Once you have located your target, rotate the massive turret and listen to the grinding of gears of the real German war machine. The more you control this R/C tank, the more you will feel like the commander of the full size Tiger I ! The front-mounted gearbox contains two Type 380 motors that can operate together or individually to produce forward/reverse running and pivot turning. Metal torsion bars and suspension arms combine with the wide tracks to smoothly absorb bumps and dips in th R/C Tiger I Early w/Option Kit   Warning! Not suitable for children under 14 years.

Plus
Actros 3363 GigaSpace

Camions RC

Actros 3363 GigaSpace

€485.00

Article number: 300056348 Product: 1:14 RC MB Actros 3363 GigaSpace 6x4 This is a highly accurate 1/14 scale radio control model that recreates the Mercedes Benz Actros 3363 3-axle truck. The Actros series debuted in 2011 and was named 2012 Truck of the Year. Powered by a 15.6-liter inline-6 turbocharged diesel putting out a max of 630hp, the actual 3363 can haul up to 250 tons! The Tamiya rendition faithfully captures the truck's modern form with the use of ABS plastic body parts and a number of metal chassis components. One look at the detailed interior and auxiliary equipment, such as air tanks, will confirm that the body features replica-quality realism, which is further enhanced with metal transfers depicting emblems and numerous metal-plated parts. The chassis is built for durability as it uses aluminum side channels with resin cross members. Drivability is accomplished by power from the front-mounted motor and is transmitted via a propeller shaft to the rear axle; built-in differential gears guarantee smooth cornering. Gear changes can be made via a separately-sold 4-channel transmitter. The Actros' realism can be further heightened with separately-available trailers that can be attached to its coupler and make the model over a meter in length!

Plus
Arocs 3363 (Light Gun Metal)

Camions RC

Arocs 3363 (Light Gun Metal)

€437.00

Article number: 300056359 Product: 1:14 RC Arocs 3363 (Light Gun Metal) This is a special edition of the R/C Mercedes Benz Arocs (Item 56352), the super-stylish 3-axle truck with distinctive bucket tooth grille. It is a great option for those without the time or confidence to apply a paint job to their kit, as the cab, H, K, and M parts of the kit are pre-painted in Light Gun Metal (Tamiya Color TS-42), and given a urethane coating for a beautiful finish, and protection from damage. About the Model • This is a 1/14 scale R/C model assembly kit. Length: 529mm, width: 190mm, height: 267mm. The narrow body of the ClassicSpace variant Arocs 3363 is recreated accurately, complete with the distinctive "buckettooth" grille and headlight guards. Cab, H, K, and M parts are molded in gray, pre-painted in Light Gun Metal (TS-42), with a urethane top coat for a stunning finish. Photo- etched parts recreate cab rear platform. • Interior features such as seat and dashboard are depicted. • 3-axle chassis utilizes ladder frame with aluminum side channels and resin cross members. Realistic drivetrain has a front mounted motor powering twin rear axles. • 3-speed transmission can be controlled via 4ch R/C transmitter. • Highly realistic suspension employs metal leaf spring dampers and friction dampers. • Coupler is included to enable connection with any currently available Tamiya 1/14 scale trailer. • Compatible with tractor truck option parts (TROP) such as Items 56531, 56532, 56536 and 56538. Use with Multi-Function Control Unit MFC-03 (Item 56523) (or MFC-01, Item 56511) for realistic lights and sounds.

Plus
Lancia 037 Rally (TA02-S)

Modèles sur piste RC

Lancia 037 Rally (TA02-S)

€209.00

Article number: 300058654 Product: 1:10 RC Lancia 037 Rally (TA02-S) Tamiya is delighted to announce the release of this model, which sees the classic Lancia 037 Rally body (previously used in Items 58040 and 58278) paired with the evergreen TA02 chassis' short wheelbase variant. The 037 Rally was Lancia's 1983 Group B WRC offering and took a 1-2 at the Monte-Carlo Rally as it romped to that year's manufacturers' championship. Its dashing body design was the work of the renowned artists at Pininfarina, and the highly distinctive shell retains popularity even today. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 422mm, width: 186mm, height: 132mm. • The injection molded body offers a highly realistic recreation of the 037 form, and comes with metal-plated light cases for headlights, taillights and fog lamps. Side mirrors and windshield wipers are separate parts. • The interior features a piece including depictions of driver & co-driver, plus dashboard. • The TA02S chassis is a shaft-driven 4WD unit with bathtub frame, a rear ball diff and front gear diff. • Four-wheel independent double-wishbone suspension is paired with CVA oil dampers. • The front bumper and sticker sheet are newly-produced for this model. • Compatible with standard Type 540 motors.

Plus
New
Mercedes-AMG GT3 (TT-02)

Modèles sur piste RC

Mercedes-AMG GT3 (TT-02)

€143.00

Article number: 300058639 Product: 1:10 RC Mercedes-AMG GT3 (TT-02) Tamiya continue to expand our range of kits on the entry level TT-02 with this stunning new release. It depicts the fabulous body of the Mercedes-AMG GT3 car, which was created for the GT3 class of racing from 2016 onwards. The 6.3-liter V8 powered car has quickly become a modern legend with race results like a clean sweep of the top 4 in a 2016 Nürburgring 24-hour race. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 453mm. • The luxurious, powerful form of the Mercedes-AMG GT3 is recreated in polycarbonate. • Separately molded parts are included in the kit to recreate side mirrors and the distinctive rear wing. • PS-63 Bright Gun Metal (Item 86063) is a new Tamiya Color spray for polycarbonate, formulated especially for this model. It recreates the standard works color (requires a coat of PS-55 Flat Clear on outside of body). • The beginner-friendly yet highly adaptable TT-02 is a versatile and easy-to-maintain chassis. • Comes with the 12-spoke wheels used in Item 58619. • Stickers are included to recreate the markings of the car, as are masking stickers for use when painting. • An extensive TT-02 option parts line-up offers a number of opportunities to tune your car. • Please note that R/C equipment and battery pack are separately required.

Plus
Monster Beetle (2015)

Modèles hors piste RC

Monster Beetle (2015)

€214.00

Article number: 300058618 Product: 1:10 RC Monster Beetle (2015) Tamiya is delighted to announce the release of this updated version of another of our back-catalog classics, the Monster Beetle (Item 58060, from 1986). This model features a stylized version of the timeless Volkswagen Beetle body, mounted on an all-action 2WD chassis fitted out with big tires for rough-and-tumble off-road fun. This new model promises to be great fun for both beginners and Tamiya veterans alike! About the Model • This is a 1/10 scale R/C model assembly kit. Length: 410mm, width: 290mm, height: 240mm. • The injection-molded plastic body accurately captures the form of the early Beetle. Where possible, stickers have been kept over from the original model designs; these are joined by newly-designed markings. • The rugged ABS space frame chassis from Item 58060 has been kept on. It utilizes double-wishbone front, and trailing arm rear suspension setups in tandem with CVA oil dampers. • Rear universal drive shafts transfer power smoothly, and come with rubber boots to protect from dust. • A large dust cover is included to protect the vital R/C equipment. • The model has great off-road performance thanks to 130mm-diameter tires with a combined lug/pin spike tread. They are paired with gold color plated one-piece wheels. • Includes a driver figure. Included: Assembly kit with pictured user guide, Tamiya ESC (capable of running brushed and brushless motors), electric motor type 540, ABS body Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

Plus
NSU TT Jager (M-05)

Modèles sur piste RC

NSU TT Jager (M-05)

€124.00

Article number: 300058649 Product: 1:10 RC NSU TT Jager (M-05) West German manufacturer NSU's Prinz was a highly popular compact car, produced between 1958 and 1973. This model recreates the Jägermeister-sponsored edition of the NSU TT, a race-oriented variant of the Prinz, of which almost 2,500 examples were built in the late 1960s and early 1970s. It was powered by a variety of inline-4 engines depending upon the spec. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 393mm. • The form of the NSU TT Jägermeister is recreated faithfully in polycarbonate. • The M-05 chassis is a compact unit based around a lightweight monocoque and offering great weight distribution with a low center of gravity. • This model uses the 239mm L wheelbase. • Gold color multi-spoke wheels are those seen on Item 47308, paired with M-Chassis slick tires. • Comes with marking stickers, plus masking stickers for use when painting the body. • The popular M-05 has a wide range of Hop-Up Option parts available to tune the chassis.

Plus
Star Unit Lunch Box Mini SW-01

Modèles sur piste RC

Star Unit Lunch Box Mini SW-01

€87.99

Article number: 300057409 Product: 1:24 RC Star Unit Lunch Box Mini SW-01

Plus
Toyota Hilux Extra Cab (CC-01)

Modèles hors piste RC

Toyota Hilux Extra Cab (CC-01)

€219.00

Article number: 300058663 Product: 1:10 RC Toyota Hilux Extra Cab (CC-01) A brand new release on the trusty CC-01 chassis: this model recreates the latest version of a famous name in the Tamiya catalog, the Toyota Hilux. It depicts the 8th generation of the vehicle, released back in 2015, specifically a special full size version of the Extra Cab which Toyota’s British arm had made in the colors of Tamiya’s legendary Bruiser (Items 58048 and 58519) as a tribute to our model. It also appeared in some high profile PR activity. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 465mm, width: 200mm. • The rugged Hilux Extra Cab form is depicted in lightweight and durable polycarbonate, with separate metalplated side mirror and light case parts. • Includes 2 each of white (headlight) and red (taillight) 5mm-diameter LEDs and the LED Light Unit. Please note that the model light cases can be fitted with up to 6 LEDs front and rear. • Metal-plated wheels are paired with realistic tires featuring authentic block tread pattern. • Highly reliable CC-01 chassis features a full-time 4WD system and front double wishbone, rear 4-link rigid suspension equipped with 4 CVA oil dampers. • This model uses the longer 267mm wheelbase. • An expansive range of option parts is available to customize the CC-01 chassis.

Plus
VW Beetle Rally (MF-01X)

Modèles sur piste RC

VW Beetle Rally (MF-01X)

€157.00

Article number: 300058650 Product: 1:10 RC VW Beetle Rally (MF-01X) This is the latest release on the MF-01X chassis, and it features a rally version of a true classic car. The Volkswagen Beetle - thanks to its superlative reliability and uncomplicated upkeep - was a fixture on the global rally circuit from the 1950s through to the 1980s, and this model is inspired by such rallying Beetles. What better chassis to pair it with than the shaft-driven 4WD MF-01X, which is at home on a range of surfaces from road to flat dirt? About the Model • This is a 1/10 scale R/C model assembly kit. Length: 397mm, width: 163mm. • The model uses the 239mm L wheelbase. • The playful form of the Beetle is captured artfully in polycarbonate. Bumpers and side mirrors are recreated using separate metal-plated parts. • Front light pods and brand new rally-style stickers are included to give the model a rally car air. Rally block tires offer excellent grip. • The MF-01X is at home on-road or on flat dirt, thanks to 4-wheel double wishbone suspension. • Power from the rear mounted motor is transmitted by gear differential to the rear wheels, and via a propeller shaft to the front. The chassis can be assembled into S and M wheelbases using separately sold propeller shafts. • A host of Hop-Up Option parts are available to tune the MF-01X chassis.

Plus
1991 Audi V8 Touring (TT-02)

Modèles sur piste RC

1991 Audi V8 Touring (TT-02)

€143.00

Article number: 300058682 Product: 1:10 RC 1991 Audi V8 Touring (TT-02) Tamiya is delighted to announce the appearance of another classic racing car on our popular TT-02 chassis, this time the Audi V8 touring car with a 456hp 3.6-liter V8 which graced the DTM (Deutsche Tourenwagen Masters) in 1991. That season, it took four victories overall and carried Frank Biela to the drivers’ title. About the Model • This is a 1/10 R/C model assembly kit. • The powerful, imposing body is molded accurately in lightweight and durable polycarbonate. • Stickers are included to recreate the markings for the no.45 car driven by 1991 champion Frank Biela. Masking stickers will aid in the paint job. • Two-piece mesh wheels (Item 50548 design) have silver color rims and gold color spokes. They are paired with racing slick tires. • The TT-02 chassis is an adaptable and balanced design with excellent stability, plus features such as identical suspension arm and upright components for ease of assembly. • 4-bevel differential gears and 4-wheel double wishbone suspension make for a smooth ride. • A plethora of Hop-Up Option parts is available to tune the TT-02 chassis to your needs.

Plus
1:10 RC Buggy Sand Scorcher 2010 2WD

Modèles hors piste RC

1:10 RC Buggy Sand Scorcher 2010 2WD

€361.00

Article number: 300058452 Product: 1:10 RC Buggy Sand Scorcher 2010 2WD Originally released in 1979, the R/C Sand Scorcher was greatly received from fans around the world with its humorous form and superb mechanism. Keeping true to the basic layout of the original while incorporating many refined parts, this re-released version of the Sand Scorcher will remind you of the original. This model realistically reproduces the unique form of the buggy which was seen at the one-make race at the "Baja 1000" in California, USA. The body is molded in white polystyrene and can be painted with Tamiya plastic model paints. The rear-wheel drive 2WD chassis features realistic and aggressive driving performance that will no doubt excite you. Chassis layout: Chassis features a 2mm thick FRP plate with an aluminum reinforcing plate for strength and flexibility to ensure stability. 4-wheel independent suspension features front double trailing arm and rear swing axle setups, die-cast suspension arms, and oil dampers. Electronics and battery are protected by a durable clear plastic mechanism box. Comes equipped with full ball bearings to reduce friction loss, and mounted on the 3-piece center-lock wheels are grooved front tires and ribbed rear tires that ensure superb off-road performance.   Warning! Not suitable for children under 14 years.

Plus
1:10 RC Ford F-350 HighLift 4x4 3-Speed

Modèles hors piste RC

1:10 RC Ford F-350 HighLift 4x4 3-Speed

€508.00

Article number: 300058372 Product: 1/10 RC Ford F-350 HighLift 4x4 3-Speed Electric R/C assembly kit of one of the most representative American pick-up trucks, the Ford F-350. The model features realistic ladder frame, 3-speed transmission and shaft drive 4WD system. Highly detailed injection molded body and large diameter wheels enhance the stylish high-ground-clearance look. Original marking stickers add to the truck's overall realism. Ford F-350 High-Lift Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

Plus
1:10 RC Lancia Delta HF Integrale TT-02

Modèles sur piste RC

1:10 RC Lancia Delta HF Integrale TT-02

€157.00

Article number: 300058570 Product: 1:10 RC Lancia Delta HF Integrale TT-02 The Integrale will also be available on Tamiya’s versatile new TT-02 chassis, which is suited to a wide range of drivers’ abilities. About the Model • This is a 1/10 scale R/C assembly kit. • Kit includes FREE BONUS PARTS (Item 53156 Hard Inner Sponge Set) which are for EXPORT ONLY and are subject to the FIRST PRODUCTION. • The model’s polycarbonate body accurately recreates that of the real rally car. • The shaft driven 4WD TT-02 is a highly versatile and easy-to-maintain chassis. • A wide range of option parts are becoming available to tune and customize TT-02 chassis machines. • The kit includes decorative and masking stickers. • Rally Block tires are fitted to stylish white wheels. • Type 540 Motor included.   Warning! Not suitable for children under 14 years.

Plus
1:10 RC Landfreeder Quadtrack TT-02FT PB

Modèles hors piste RC

1:10 RC Landfreeder Quadtrack TT-02FT PB

€350.00

Article number: 300058690 Product: 1:10 RC Landfreeder Quadtrack TT-02FT PB • This is a 1/10 scale R/C model assembly kit. Length: 425, width: 247mm. • The Landfreeder body comes molded in polycarbonate, pre-painted Black (PS-5) with Smoke (PS-31) windows. Separate plated parts recreate grille cover, fog lamps and roll bar. • The TT-02FT is a variant of the TT-02, with four tracks on its suspension. • Each of the three-sided trackunis is 39.3mm in width and has a contact area of 60mm length. Tracks require assembly from links, and offer efficient traction. • Two types of elastomer track link (standard and grouser) are included for setup options. • Track units are attached to suspension arms via plates, and each features a sprocket and four rollers. The third roller is sprung to further enhance performance. • Polycarbonate chassis cover and wheel well liners give protection from dust and dirt encountered off-road. • TT-02 four-bevel differentials and identical suspension arms are used. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

Plus
New
1:10 RC Mercedes Benz Unimog U425(CC-01)

Modèles hors piste RC

1:10 RC Mercedes Benz Unimog U425(CC-01)

€247.00

Article number: 300058609 Product: 1/10 RC Mercedes Benz Unimog 425(CC-01) The Tamiya CC-01 (Cross Country) chassis is a favorite vehicle amongst R/C enthusiasts. It’s easy to assemble and offers realistic cross country running. The list of body styles available has grown with the addition of the Unimog 425. The Unimog, of course, is a multi-purpose truck with unrivalled off-road performance and its name is an acronym which stands for the German description "UNIversal-MOtor-Gerat." The 425 variant was a heavier model that was produced in the 1970s and 1980s. It featured a 120hp engine and 2.81m wheelbase. The Tamiya R/C replica faithfully captures all of the full size Unimog details down to the large snorkel and cap vent and large side view mirrors. The Unimog body is mounted on the capable CC-01 Cross Country chassis, which features independent front suspension and a rear 4-link rigid suspension set up for fun scale trail running enjoyment. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

Plus
1:10 RC Nissan GT-R Drift (TT-02D)

Modèles sur piste RC

1:10 RC Nissan GT-R Drift (TT-02D)

€209.00

Article number: 300058623 Product: 1:10 RC Nissan GT-R Drift (TT-02D) Tamiya is delighted to announce a new release on the drift spec TT-02D chassis. This model depicts the Nissan GT-R, using the body originally included in Item 58411. The GT-R was unleashed on the world by Nissan in December 2007. Laden with a powerful 3.8-liter V6 twin-turbo engine, dual clutch transmission, independent transaxle 4WD and more, it was designed to be a supercar ready to be driven any time, anywhere and by anyone, and featured regular annual performance-boosting design tweaks. About the Model • This is a 1/10 scale R/C model assembly kit. • The sleek, powerful form of the GT-R is captured faithfully by the polycarbonate body. • Features separately-molded side mirror and rear wing parts. • LED units are included for export version only! • The TT-02D is the specially tuned drift spec of the popular shaft-driven 4WD entry chassis, the TT-02. • Features 24mm width drift-spec tires on metal-plated mesh wheels, CVA oil dampers, full ball bearings, a sport-tuned motor and aluminum motor heat sink. • The body was originally used on Item 58411.

Plus
1:10 RC Porsche 911 Carrera RSR (TT-02)

Modèles sur piste RC

1:10 RC Porsche 911 Carrera RSR (TT-02)

€152.00

Article number: 300058571 Product: 1:10 RC Porsche 911 Carrera RSR (TT-02) The Porsche 911 Carrera RSR joins the rapidly-expanding TT-02 chassis line-up. It is a legendary Group 4 car which had a body weighing just 900kg with a 300hp-plus horizontally opposed 6-cylinder engine, and still holds a place in fans’ hearts today thanks to its exploits with racing teams the world over. In 1973, the year of its release, it won the European GT Championship, plus the renowned 24 Hours of Daytona and 12 Hours of Sebring races. The works prototype in predominantly silver livery with the Martini stripe also took the checkered flag in the famed Targa Florio race. About the Model • This is a 1/10 scale R/C assembly kit. • The model’s polycarbonate body accurately recreates that of the real car. Rear wing is integrated with body. • Separate parts are included to depict side mirror. • The shaft driven 4WD TT-02 is a highly versatile and easy-to-maintain chassis. • A wide range of option parts are becoming available to tune and customize TT-02 chassis machines. • The kit includes decorative and masking stickers. • EXPORT VERSION ONLY includes RS-540 Torque-Tuned Motor.   Warning! Not suitable for children under 14 years.

Plus
1:10 RC RAYBRIG NSX Concept-GT (TT-02)

Modèles sur piste RC

1:10 RC RAYBRIG NSX Concept-GT (TT-02)

€147.00

Article number: 300058599 Product: 1/10 RC RAYBRIG NSX Concept-GT (TT-02) The Raybrig NSX Concept-GT is also released on the reliable shaft-driven 4WD of the TT-02 Chassis. The racing car was developed to race in the 2014 Japanese Super GT Series, and features a 1.6-liter turbocharged direct injection engine with anti-lag, plus a midship layout that optimizes distribution of car's weight, particularly taking into account its unique hybrid system. About the Model • This is a 1/10 scale R/C model assembly kit. Wheelbase: 257mm. • The durable polycarbonate body accurately captures the low nose and complex make up of the front and rear ends. • The TT-02 is a highly versatile and easy-to-maintain chassis. • Separate parts are included to recreate dynamic rear wing and unique door mirrors. • Comes with black 10-spoke wheels. • Includes body markings and masking stickers for use when painting the model. • A wide range of option parts is available to tune and customize TT-02 Chassis cars. • Please note that R/C equipment and battery pack are separately required.   Warning! Not suitable for children under 14 years.

Plus
1:10 RC Super Clod Buster 2012

Modèles hors piste RC

1:10 RC Super Clod Buster 2012

€309.00

Article number: 300058518 Product: 1:10 RC Super Clod Buster 2012 The Super Clod Buster is back! This monster truck features a body that was inspired by classic pick-up trucks from the 1980"s, giving it a realistic appearance. The front grille, air intake and roll bar are recreated with metal-plated parts. The truck also features a twin-motor dual gearbox 4WD drivetrain, 8 coil spring dampers and massive 165mm diameter tires, as well as a 4-wheel drive steering system to help the model navigate tight corners.

Plus
1:10 RC TA08 PRO Chassis Kit

Modèles sur piste RC

1:10 RC TA08 PRO Chassis Kit

€318.00

Article number: 300058693 Product: 1:10 RC TA08 PRO Chassis Kit • This is a 1/10 scale R/C touring car chassis kit. • Features Stepped-V shaped chassis which balances weight and rigidity. The battery pack and servo are positioned on a slight angle (about 10 degrees) to reduce surface contact and facilitate optimum weight distribution. • Positioning spur gear in front of motor produces stable drivability. • 2 belt-driven 4WD uses TRF420 gear differentials and steel TA07 differential joint cups. • A-arm suspension arm gives your model a low center of gravity, enhanced with laid down dampers. Camber and caster angles are adjustable by turnbuckle shafts and lower arm spacers respectively. • Comes with Super Short Big Bore size dampers. Universal shafts and full bearings give efficient drive. • Rotating body mounts by 180 degrees switches between standard and 2mm advanced body positions. • Please note that the R/C equipment, motor, battery pack, tires and body are sold separately Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

Plus
1:10 RC The Grasshopper II Black Edition

Buggys RC

1:10 RC The Grasshopper II Black Edition

€120.00

Article number: 300047471 Product: 1:10 RC The Grasshopper II Black Edition • This is a 1/10 scale R/C 2WD buggy model assembly kit. Length: 400mm, width: 223mm, height: 136mm. • The durable black injection molded polystyrene body just requires application of stickers for easy setup, and has a driver figure (not painted) for attachment. • The durable ABS chassis uses front swing arm and rear rolling rigid suspension setups. • Fully enclosed gearbox contains a differential gear to aid smooth cornering. • Longitudinal battery is easily removable from the back of chassis. • Wheels are molded in durable ABS plastic. • Uses CVA oil dampers and Item 45069 TBLE-04S for export, and friction dampers for kits sold in Japan. • Compatible with a range of Hop-Up Option parts. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

Plus
New
1:10 RC Toyota HiLuxHighLift 4x4 3-Speed

Modèles hors piste RC

1:10 RC Toyota HiLuxHighLift 4x4 3-Speed

€489.00

Article number: 300058397 Product: 1/10 RC Toyota HiLuxHighLift 4x4 3-Speed Combining nostalgic feel with modern mechanics, the superbly detailed classic Toyota pick-up truck body is now mounted on the same chassis as the Ford F-350 High-Lift. Toyota Hilux High-Lift Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

Plus
1:10 RC Toyota Supra Drift Spec TT-02D

Modèles sur piste RC

1:10 RC Toyota Supra Drift Spec TT-02D

€176.00

Article number: 300058613 Product: 1/10 R/C Toyota Supra (TT-02D) Drift Spec One of the most recognized Japanese sports cars around the world, the Supra has left its mark both on the race track in the hands of pro drivers and on the streets in the hands of enthusiasts. Now, the Tamiya model (original release: Item 58392) is given a new release on the new Tamiya drift unit, the TT-02D chassis. About the Model • This is a 1/10 scale R/C model assembly kit. • The aggressive form is captured faithfully by the polycarbonate body. • Features separately-molded side mirror and rear wing parts. • Includes carbon pattern decals for engine hood and rear wing. • The TT-02D is the specially tuned drift spec of the popular shaft-driven 4WD entry chassis, the TT-02. • Features 24mm width drift-spec tires on metal-plated mesh wheels, CVA oil dampers, full ball bearings, a sport-tuned motor and aluminum motor heat sink. • The body was originally used on Item 58392. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

Plus
1:10 RC Unimog 406 Ser.900 CR-01

Modèles hors piste RC

1:10 RC Unimog 406 Ser.900 CR-01

€409.00

Article number: 300058414 Product: 1/10 RC Unimog 406 Ser.900 CR-01 MB Unimog 406 Ser.U900 CR01 Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

Plus
1:10 RC Wild Willy 2000 (WR-02)

Modèles hors piste RC

1:10 RC Wild Willy 2000 (WR-02)

€181.00

Article number: 300058242 Product: 1:10 RC Wild Willy 2000 (WR-02) The Wild Willy 2 is a reproduction of the popular original Wild Willy from the mid 80s. The new Wild Willy has an all new chassis and larger tires allowing it to tread over rough terrain. Of course, the Wild Willys trade mark is the animated wheelie capability thanks to an all new wheelie bar. WR-02 Chassis: The WR-02 chassis features a heavy duty monocoque which has side frames to increase rigidity. R/C unit, motor, and battery pack are positioned along the centerline of the chassis and the motor's power is delivered to the rear wheels via a fully-enclosed gearbox equipped with a differential. A wheelie bar is fitted to enable exciting, wheels in the air driving action. 4-wheel double wishbone suspension and 2-piece steering tie-rod offer smooth steering response. Tires/wheels and the gearbox/motor come pre-assembled for ease of assembly. Requires: 2-channel radio, 7.2 volt battery & charger, and Tamiya TS paint Wild Willy 2

Plus
1:10 RC XV-01 Lancia Delta HF Integrale

Modèles sur piste RC

1:10 RC XV-01 Lancia Delta HF Integrale

€257.00

Article number: 300058569 Product: 1:10 RC XV-01 Lancia Delta HF Integrale The Lancia Delta Integrale, which has made a number of appearances on various chassis over the years, now comes on the XV-01 chassis. Rally fans are sure to have fond memories of this legendary rally warrior, which won 6 titles back-to-back at the end of the 1980s and start of the 1990s. About the Model • This is a 1/10 scale R/C assembly kit. • The body is recreated faithfully in polycarbonate. • The XV-01 chassis features front-motor belt-driven 4WD. • Metal-plated side mirrors and grille come as separate parts. • The car is appropriately fitted with Rally Block tires, on white wheels. • Type 540 Motor included.   Warning! Not suitable for children under 14 years.

Plus
1:12 RC X-SA Lunch Box

Modèles hors piste RC

1:12 RC X-SA Lunch Box

€190.00

Article number: 300046701 Product: 1:12 RC X-SA Lunch Box The first classic Tamiya model to join the brand new X-SA series is the Lunch Box, favored basher of many an R/C fan and offering an all-around fun 2WD drive on those iconic bulging tires! About the Model • This is a 1/12 scale finished R/C model. Length: 385mm, width: 290mm, height: 225mm. Wheelbase: 207mm. • The classic Lunch Box body is molded in styrene plastic in the original yellow, with the now legendary markings already applied. • Yellow wheels are paired with 115mm tires for some serious off-road capacity. • The durable and easy-to-assemble 2WD chassis features a box type frame with front swing arm independent and rear rolling rigid suspension setups. • A pre-assembled, sealed gearbox protects the diff gear from sand and other intruding debris. • Features a rear wheelie bar for wild wheels-in-the-air driving. • Requires separately sold R/C equipment, battery pack and charger.

Plus
1:14 Multi-function Control Unit MFC-01

Camions RC

1:14 Multi-function Control Unit MFC-01

€352.00

Article number: 300056511 Product: 1/14 Multi-function Control Unit MFC-01 About the Tractor Truck Multi-Function Control Unit Tamiya presents incredible sound and action options for any 1/14 scale R/C Tractor Truck with the all R/C Tractor Truck Multi-Function Control Unit. This system, when mounted on the truck is located inside the cabin with speaker to the front and the MFC-01 unit to the rear. The control unit is mounted inside the left tool box for easy access.

Plus
1:14 Multi-function Unit MFC-03

Camions RC

1:14 Multi-function Unit MFC-03

€380.00

Article number: 300056523 Product: 1/14 Multi-function Unit MFC-03 The popular Multi-Function Control (MFC) unit for R/C tractor trucks, which adds a whole extra layer of realism to driving, receives an update. This unit allows transmitter trim levers to be combined with stick control use, meaning you can enjoy lights, sounds and vibrations coordinated with actions while driving your R/C tractor truck model. This version of the MFC features engine sounds which were recorded from a real European truck's L6 diesel engine for amazing realism. About the MFC-03 • Features 33 different types of sound, including engine ignition and shutdown, horn, gear changes, brakes, air sound effects and so on. A 60mm-diameter full-range speaker in a resin case provides excellent quality. • Up to 21 actions can be controlled using a 4-channel transmitter. • Light operation and volume adjustment are also possible using the transmitter. • Includes white, red and yellow high brightness LEDs to duplicate truck HID lights with precision. • An ESC has been built in to the unit, enabling realistic running at very low speeds. • The MFC unit can be run in three modes: R/C mode with Multi-Function (lights and sounds) off; Multi mode, with R/C and multi-function on; Demo mode, which allows display of lights and sounds only. • Can be used for support leg operation when employing Item 56505 Motorized Support Legs. • Cannot be used together with Item 53909 TLU-01 or Item 53937 TLU-02. • Requires separately sold 4ch transmitter with slide trims, 4ch receiver and 2 servos (3 if using Item 56505) .

Plus
1:14 NYK 40ft Container Semi-Trailer

Camions RC

1:14 NYK 40ft Container Semi-Trailer

€513.00

Article number: 300056330 Product: 1:14 RC 40ft NYK Container Semi-Trailer Nippon Yusen Kaisya (NYK) is one of the largest shipping companies in the world. This is the Tamiya replica in 1/14 scale and it is the second container model released in the Tractor Trailer R/C category. The container features an aluminum frame with durable ABS front, top, and side panels. The well-known NYK logos are reproduced on the included vinyl sticker sheet, and the container can be detached from the semi-trailer after assembly. The 3-axle semi-trailer chassis comes with a realistically reproduced leaf-spring suspension. This semi-trailer can be connected to any Tamiya 1/14 R/C Tractor Truck and a variety of Option Parts can also be installed for enhanced realism.

Plus
1:14 RC 3-Axle-ReeferSemi Trailer Kit

Camions RC

1:14 RC 3-Axle-ReeferSemi Trailer Kit

€451.00

Article number: 300156319 Product: 1/14 RC 3-Axle-ReeferSemi Trailer Kit Owners of Tamiya's 1/14 R/C trucks have been calling for a 3-axled trailer to better recreate the load outs of trucks in their respective countries. We are now proud to present this brand new 3-axle Reefer (Refrigerated) Semi-Trailer to further distinguish our unique lineup of R/C truck products.   Warning! Not suitable for children under 14 years.

Plus
1:14 RC Grand Hauler Customized

Camions RC

1:14 RC Grand Hauler Customized

€437.00

Article number: 300056344 Product: 1/14 R/C Grand Hauler Meet the latest addition to the 1/14 scale Tractor Trucks series! This model is based upon that Tamiya classic, the King Hauler (Item 56301). The King Hauler body is given an overhaul with numerous newly-designed parts inspired by the modern day trend of tractor truck customization. A number of metal and metal-plated resin parts further add to the mood of the model. Its longer frame gives the model proportions reminiscent of show trucks. About the Model • This is a 1/14 scale R/C model assembly kit. Length: 692mm, width: 190mm, height: 300mm. • The realistic, lengthened body features newly-designed parts depicting front and rear bumpers, front grille, air cleaners and muffler covers. Muffler covers are made from metal tubing. • Features a tough ladder frame construction with aluminum side channels and resin cross members. Realistic drivetrain setup sees the front mounted motor powering twin rear axles. • 3-speed transmission can be controlled via 4ch R/C transmitter. • Metal leaf spring dampers with built-in coil springs provide durable suspension. • Newly-designed 1/14 scale driver figure included. • Coupler is included to enable connection with any currently available Tamiya 1/14 scale trailer. • Compatible with the tractor truck option parts (TROP) Items 56511, 56512, 56513, 56515, 56524, 56526 and 56530. Pair with Multi-Function Control Unit MFC-01 (Item 56511) and MFC-03 (Item 56523) for super-realistic LED lights and sounds.   Warning! Not suitable for children under 14 years.

Plus
1:14 RC King Hauler Kit

Camions RC

1:14 RC King Hauler Kit

€437.00

Article number: 300156301 Product: 1/14 RC US Truck King Hauler Kit The Mighty King Hauler resembles the classic conventional American tractor truck. Powered by it's 540 motor driven with a 3-speed transmission, which has no problem turning the dual rear axles. Each axle is supported with leaf spring and shocks. The metal C-Channel ladder frame, keeps the power to the pavement. Whether by itself or coupled to an optional trailer, the King Hauler is sure to turn heads. RC Truck King Hauler   Warning! Not suitable for children under 14 years.

Plus
1:14 RC Knight Hauler Kit

Camions RC

1:14 RC Knight Hauler Kit

€437.00

Article number: 300156314 Product: 1/14 RC EU Truck Volvo FH12 Globetrotter 420 Kit The FH series was released in the fall of 1993 and became Volvo's primary truck. The following year, it was awarded the prestigious "Truck of the Year" title. It's huge 12-liter inter cooled turbo diesel engine is known as the "Euro 2", and is the result of state-of-the-art engineering technology. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

Plus
1:14 RC LKW MAN TGX 26.540 XLX 6x4 3Axle

Camions RC

1:14 RC LKW MAN TGX 26.540 XLX 6x4 3Axle

€451.00

Article number: 300056325 Product: 1:14 RC LKW MAN TGX 26.540 XLX 6x4 3Axle The latest addition to Tamiya"s 1/14 scale R/C Tractor Truck series is the MAN TGX 26.540 6x4 XLX. This impressive truck, which made its debut at the 2007 European Transport Road Show in Amsterdam, was the winner of the 2008 Truck of the Year award. It features two rear axles which assist in the carrying of heavy loads over long distances. It is powered by an in-line 6 cylinder 12.4 liter turbocharged diesel engine which meets the stringent Euro 5 emissions standards to make it more environmentally friendly.   Warning! Not suitable for children under 14 years.

Plus
1:14 RC M-B Race Truck MP4 MB MSP TT-01E

Modèles sur piste RC

1:14 RC M-B Race Truck MP4 MB MSP TT-01E

€157.00

Article number: 300058683 Product: 1:14 RC M-B Race Truck Actros MP4 TT-01E The Tamiya line of racing truck models welcomes a newcomer in the form of the Actros raced in the 2019 ETRC, and which carried the team to 4th place on the year, with veteran Hungarian driver Norbert Kiss 6th overall in the drivers’ standings. The model is based upon the proven shaftdriven 4WD of the TT-01 Type-E chassis. About the Model • This is a 1/14 scale R/C model assembly kit. Length: 441mm, width: 188mm. Wheelbase: 257mm. • Please note that in Japan, this model will have a pre-painted body with pre-cut wheel arches. • The racing Actros form is captured by a brand new three-part polycarbonate body with components for body, cab and coupler. • Separately molded plastic parts depict side mirrors, front and rear light cases, plus the grille emblem. • Includes stickers recreating the sponsors and livery. • Silver color molded wheels and 70mm diameter radial tires are specifically designed for racing truck models. • The TT-01 Type-E chassis features shaft-driven 4WD with easy handling Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

Plus
1:14 RC Mercedes B. Actros1851 GigaSpace

Camions RC

1:14 RC Mercedes B. Actros1851 GigaSpace

€423.00

Article number: 300056335 Product: 1/14 RC Mercedes Benz Actros 1851 GigaSpace The 2012 Truck of the Year award-winning Actros series is the flagship of the worlds leading truck manufacturer, Daimler. Its latest installment, the rear-wheel drive Actros 1851 GigaSpace runs on a 12.8-liter 6-cylinder turbo-charged engine generating 510hp and is used for long-distance haulage, heavy duty distribution haulage, construction haulage and so on. The Tamiya 1/14 scale R/C kit faithfully captures all the detail of the full size rig using ABS plastic for the body parts and a 3-speed, shift on the fly working transmission.     Warning! Not suitable for children under 14 years.

Plus
1:14 RC Mercedes-Benz 1838 LS Kit

Camions RC

1:14 RC Mercedes-Benz 1838 LS Kit

€352.00

Article number: 300156305 Product: 1/14 RC Ger. Truck Merc.Benz 1838 LS Kit The 1838LS tractor truck combines a massive aerodynamic silhouette with a powerful 380 horsepower, 12,763cc V8 cylinder turbo diesel engine. Tamiya's R/C model of the 1838LS truck realistically captures the looks of the full size truck.   Warning! Not suitable for children under 14 years.

Plus
1:14 RC Pole-Trailer Kit w/Tubes

Camions RC

1:14 RC Pole-Trailer Kit w/Tubes

€261.00

Article number: 300156310 Product: 1/14 RC Pole-Trailer Kit w/Tubes The Pole-Trailer is able to carry pipes of various lenghts due to its collapsible pole. The trailer also features an aluminum chassis and 4 highly detailed wheels. 5 plastic pipes of 55mm in diameter and 75cm in length are included.   Warning! Not suitable for children under 14 years.

Plus
1:14 RC SCANIA R470 Highline 4x2 Kit

Camions RC

1:14 RC SCANIA R470 Highline 4x2 Kit

€361.00

Article number: 300156318 Product: 1/14 RC EU Truck Scania R470 Highline Kit It has been a long time in coming, but Tamiya has heard the demand from fans around the world and is now proud to present award-winning truck maker Scania's state-of-the-art R470 Highline as the newest addition to our unique 1/14 scale R/C tractor truck series. About the Scania R470 Highline Swedish manufacturer Scania has a long history of producing exceptional trucks designed for long-haul transport. The company's R-series made its debut in 2004 and quickly built a highly favorable reputation that led to it being given the prestigious International Truck of the Year award in 2005. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

Plus
1:14 RC Scania R470 Silver Edition

Camions RC

1:14 RC Scania R470 Silver Edition

€418.00

Article number: 300056364 Product: 1:14 RC Scania R470 Silver Edition This is a special edition of the R/C Scania R470 truck (original: Item 56318), the stylish 4x2 model that depicts a vehicle belonging to Scania’s International Truck of the Year 2005 award-winning R Series. It is a great option for those without the time or confidence to apply a paint job to their kit, as cab parts come pre-painted in TS-17 Gloss aluminum, and given a urethane coating for a beautiful, lasting finish. About the Model • This is a 1/14 scale R/C model assembly kit. Length: 452mm, width: 187mm, height: 293mm. • The classic form of the R470 is recreated accurately, complete with cab that tilts forward separately from fenders, just like on the full-sized truck. Cab, F, H, K, and M parts are molded in gray and pre-painted in Gloss aluminum (TS-17), with a urethane top coat for a stunning finish. • Interior features such as seat and dashboard are depicted. • 2-axle chassis utilizes ladder frame with aluminum side channels and resin cross members. Realistic drivetrain has a front mounted motor powering twin rear axles. • 3-speed transmission can be controlled via 4ch R/C transmitter. • Highly realistic suspension employs metal leaf springs. • Coupler is included to enable connection with any currently available Tamiya 1/14 scale trailer. • Compatible with a range of tractor truck option parts (TROP). Use with Multi-Function Control Unit MFC-03 (Item 56523) (or MFC-01, Item 56511) for realistic lights and sounds.

Plus
1:14 RC Scania R620 6x4 High.blue paint.

Camions RC

1:14 RC Scania R620 6x4 High.blue paint.

€451.00

Article number: 300056327 Product: 1/14 RC Scania R620 6x4 Highome blue painted This is a special edition kit of the 1/14 R/C Scania R620 6x4 Highline. The kit includes body components that are pre-painted in Tamiya Synthetic Lacquer TS-51 Racing Blue paint. The body is also clear coated with a urethane clear topcoat.     Warning! Not suitable for children under 14 years.

Plus
60 de 130 Article