Ce site utilise des cookies. En poursuivant la navigation sur ce site, vous acceptez l’utilisation de cookies.
OK
Tamiya CarsonMajoretteDickie ToysSchuco 

5.8 BCNuts for TRF Dampers *8

Article number: 300042344 Product: 5.8 BCNuts for TRF Dampers *8 ★These steel ball connector nuts are spares for parts in Item 54878 Upgrade Set for TRF Super Short Big Bore Dampers. ★They have a slick metal plating for super smooth motion.   Warning! Not suitable for children under 14 years.
€14.99
TVA incluse, plus Frais d'expédition

630 Ball Bearings *8

Article number: 300054925 Product: 630 Ball Bearings *8 Ball bearings are an excellent first step when tuning up your chassis from box stock, providing more efficient drive and longer lasting fun thanks to less wear and tear on moving parts. The 630 ball bearings in this set are for use in the reduction gears on the G6-01TR and GF-01TR chassis. Item Contents/Information • 630 Ball Bearings x8 • For use in the reduction gears on G6-01TR and GF-01TR chassis    models. Each reduction gear requires two 630 ball bearings –    sixteen total (two of this set) to kit out the GF-01, or twenty-four    (three of this set) to kit out the G6-01. • Compatible with GF-01TR and G6-01TR chassis cars.   Warning! Not suitable for children under 14 years.
€13.69
TVA incluse, plus Frais d'expédition

Adjustable SusMt Bushing

Article number: 300054922 Product: Adjustable SusMt Bushing These components are for use with the recently-announced adjustable suspension mounts (it was also included in those products). Item Contents/Information • Bushings Sprue x1 • The bushings sprue contains 7 pairs of different bushing types,    each type with a different hole for the suspension shafts,    giving a total of 25 potential shaft offset positions, and a range    of toe, roll center and skid angle setups. • For use with TRF419, TB-05 and TA07 chassis cars using    adjustable suspension mounts.   Warning! Not suitable for children under 14 years.
€4.29
TVA incluse, plus Frais d'expédition

Alu Adjustable SepSusMt (A)

Article number: 300054884 Product: Alu Adjustable SepSusMt (A) These parts are a new concept in Tamiya suspension mounts, using different bushings to allow adjustment of the following parameters: toe angle, tread, roll center and skid (caster) angle! There are three different types of mount, each with different dimensions. The bushings sprue contains 7 pairs of different bushing types, each type with a different hole for the suspension shafts, giving a total of 25 potential shaft offset positions. Contents/Information • Aluminum Adjustable Suspension Mount (A-a), (A-b) x1 each • Bushings Sprue x1 • This mount allows settings between XA and C    (toe angles depend upon separate suspension mounts    and bushings used). • Mount has the iconic Tamiya blue anodized finish. • Compatible with TRF419, TA07 and TB-05 chassis cars.   Warning! Not suitable for children under 14 years.
€22.99
TVA incluse, plus Frais d'expédition

Alu Adjustable SepSusMt (E)

Article number: 300054885 Product: Alu Adjustable SepSusMt (E) These parts are a new concept in Tamiya suspension mounts, using different bushings to allow adjustment of the following parameters: toe angle, tread, roll center and skid (caster) angle! There are three different types of mount, each with different dimensions. The bushings sprue contains 7 pairs of different bushing types, each type with a different hole for the suspension shafts, giving a total of 25 potential shaft offset positions. Contents/Information • Aluminum Adjustable Suspension Mount (E-a), (E-b) x1 each • Bushings Sprue x1 • This mount allows settings between C and G    (toe angles depend upon separate suspension mounts    and bushings used). • Mount has the iconic Tamiya blue anodized finish. • Compatible with TRF419, TA07 and TB-05 chassis cars.   Warning! Not suitable for children under 14 years.
€22.99
TVA incluse, plus Frais d'expédition

Alu Adjustable SepSusMt (XB)

Article number: 300054883 Product: Alu Adjustable SepSusMt (XB) These parts are a new concept in Tamiya suspension mounts, using different bushings to allow adjustment of the following parameters: toe angle, tread, roll center and skid (caster) angle! There are three different types of mount, each with different dimensions. The bushings sprue contains 7 pairs of different bushing types, each type with a different hole for the suspension shafts, giving a total of 25 potential shaft offset positions. Contents/Information • Aluminum Adjustable Suspension Mount (XB-a),    (XB-b) x1 each • Bushings Sprue x1 • This mount allows settings between XD and X    (toe angles depend upon separate suspension mounts    and bushings used). • Mount has the iconic Tamiya blue anodized finish. • Compatible with TRF419, TA07 and TB-05 chassis cars.   Warning! Not suitable for children under 14 years.
€22.99
TVA incluse, plus Frais d'expédition

Alu Adjustable SusMt (A)

Article number: 300054881 Product: Alu Adjustable SusMt (A) These parts are a new concept in Tamiya suspension mounts, using different bushings to allow adjustment of the following parameters: toe angle, tread, roll center and skid (caster) angle! There are three different types of mount, each with different dimensions. The bushings sprue contains 7 pairs of different bushing types, each type with a different hole for the suspension shafts, giving a total of 25 potential shaft offset positions. Contents/Information • Aluminum Adjustable Suspension Mount (A) x1 • Bushings Sprue x1 • This mount allows settings between XA and C    (toe angles depend upon separate suspension mounts    and bushings used). • Mount has the iconic Tamiya blue anodized finish. • Compatible with TRF419, TA07 and TB-05 chassis cars.   Warning! Not suitable for children under 14 years.
€16.49
TVA incluse, plus Frais d'expédition

Alu Adjustable SusMt (E)

Article number: 300054882 Product: Alu Adjustable SusMt (E) These parts are a new concept in Tamiya suspension mounts, using different bushings to allow adjustment of the following parameters: toe angle, tread, roll center and skid (caster) angle! There are three different types of mount, each with different dimensions. The bushings sprue contains 7 pairs of different bushing types, each type with a different hole for the suspension shafts, giving a total of 25 potential shaft offset positions. Contents/Information • Aluminum Adjustable Suspension Mount (E) x1 • Bushings Sprue x1 • This mount allows settings between C and G    (toe angles depend upon separate suspension mounts    and bushings used). • Mount has the iconic Tamiya blue anodized finish. • Compatible with TRF419, TA07 and TB-05 chassis cars.   Warning! Not suitable for children under 14 years.
€16.49
TVA incluse, plus Frais d'expédition

Alu Adjustable SusMt (XB)

Article number: 300054880 Product: Alu Adjustable SusMt (XB) These parts are a new concept in Tamiya suspension mounts, using different bushings to allow adjustment of the following parameters: toe angle, tread, roll center and skid (caster) angle! There are three different types of mount, each with different dimensions. The bushings sprue contains 7 pairs of different bushing types, each type with a different hole for the suspension shafts, giving a total of 25 potential shaft offset positions. Contents/Information • Aluminum Adjustable Suspension Mount (A) x1 • Bushings Sprue x1 • This mount allows settings between XA and C    (toe angles depend upon separate suspension mounts    and bushings used). • Mount has the iconic Tamiya blue anodized finish. • Compatible with TRF419, TA07 and TB-05 chassis cars.   Warning! Not suitable for children under 14 years.
€16.49
TVA incluse, plus Frais d'expédition

GF-01 Full Ball Bearing Set

Article number: 300054924 Product: GF-01 Full Ball Bearing Set Highly efficient, smooth power awaits with the installation of this set of ball bearings that includes just the right number to fully kit out the GF-01 chassis. Set Contents/Information • 1150 Ball Bearings x24 • 850 Ball Bearings x2 • Install in place of kit standard plastic and metal bearings. • Compatible with GF-01 chassis models.   Warning! Not suitable for children under 14 years.
€35.99
TVA incluse, plus Frais d'expédition

Lunch Box Mini Clear Body

Article number: 300054927 Product: Lunch Box Mini Clear Body This is an unpainted version of the body parts for the Lunch Box Mini (Item 57409). If you damaged your body with crazy wheelie driving, or just want an alternative paint job to the pre-painted yellow version, this is the product for you! • Lightweight and durable 0.8mm thickness polycarbonate. • Includes stickers to decorate the body and paint masking stickers for use in the painting process. • Body catches are not included. • Compatible with SW-01 chassis models.   Warning! Not suitable for children under 14 years.
€13.89
TVA incluse, plus Frais d'expédition

M-08 Concept Carb BM Base

Article number: 300054908 Product: M-08 Concept Carb BM Base Cut down on body wobble with unshakeable body mounts thanks to this lightweight yet rigid and durable 2.5mm thickness carbon fiber component. Item Contents/Information • Carbon Body Mount Base x1 • This part provides a base for the dual rear body mounts,    giving secure attachment and minimizing body wobble. • Damper mount spacer is also included.   Warning! Not suitable for children under 14 years.
€12.59
TVA incluse, plus Frais d'expédition

M-08 Concept Carb DS TRF Dpr

Article number: 300054909 Product: M-08 Concept Carb DS TRF Dpr Make your M-08 Concept chassis car compatible with high-performance TRF dampers using the rigid and lightweight 3mm thickness carbon fiber damper stays in this set. Set Contents/Information • Carbon Damper Stay (Front) x1 • Carbon Damper Stay (Rear) x1 • Damper stays have more holes (Front: 4 each side,    Rear: 6 each side) than kit standard parts, for greater    freedom of setup. • Small parts for attachment are also included. • Compatible with M-08 Concept chassis cars and    TRF dampers 53571, and 42102.   Warning! Not suitable for children under 14 years.
€26.89
TVA incluse, plus Frais d'expédition

New Product

  Warning! Not suitable for children under 14 years.
€27.79
TVA incluse, plus Frais d'expédition

New Product

  Warning! Not suitable for children under 14 years.
€24.99
TVA incluse, plus Frais d'expédition

Quick Hose Joint

Article number: 300074561 Product: Quick Hose Joint Repeatedly hooking up your airbrushes to the hose and air supply can be something of a pain when you need more than one airbrush for a job. Say goodbye to those worries, with the Quick Hose Joint, which allows you to connect airbrush and hose with a single touch – simply slot in to connect and slide the center section to detach! Item Contents/Information • Quick Hose Joint x1 • Plugs x2 • Joint size: Type-S (PF-1/8) • Compatible with all Tamiya Spray-Work series airbrushes. Spray-Work Basic Airbrush requires separately sold Connector Joint (Item 74536). • Not compatible with Tamiya Badger airbrushes, air cans or Basic Compressor.   Warning! Not suitable for children under 14 years.
€22.99
TVA incluse, plus Frais d'expédition

Quick Hose Joint Plugs *2

Article number: 300074562 Product: Quick Hose Joint Plugs *2 These are replacement plug sections for the Quick Hose Joint, which allows you to (dis)connect airbrush and hose with a single touch – simply by sliding its center section! Item Contents/Information • Quick Hose Joint Plugs x2 • Compatible with Item 74561   Warning! Not suitable for children under 14 years.
€10.49
TVA incluse, plus Frais d'expédition

SSBB Damper Caps (5.8 Ball) *4

Article number: 300042343 Product: SSBB Damper Caps (5.8 Ball) *4 ★These caps are for use in unison with Items 54871 and 42344, to give your TRF Super Short Big Bore Dampers a performance boost, and enhance the range of setups at your disposal.   Warning! Not suitable for children under 14 years.
€8.99
TVA incluse, plus Frais d'expédition

TB-05 Adjustable Ackerman Set

Article number: 300054923 Product: TB-05 Adjustable Ackerman Set Fine-tuning your Ackerman steering angles can make all the difference to your chassis handling, and that is exactly what you can do with this new adjustable set for the TB-05 PRO chassis. The mainly aluminum components allow three different Ackerman settings to experiment with. Set Contents/Information • The aluminum steering arms and bridge in this set can    be used to replace kit-standard plastic steering linkage parts. • 3 Ackerman settings are available: kit-standard / intermediate /    aggressive. These are achieved by interchanging the three    included bearing holder components, which have holes of    different offsets. • The aggressive setup is roughly equivalent to that of the    TA07 PRO chassis, with superior initial steering response. • Aluminum parts have the iconic Tamiya blue anodized finish. • Compatible with TB-05 PRO chassis cars.   Warning! Not suitable for children under 14 years.
€73.99
TVA incluse, plus Frais d'expédition

TB-05 Alu. R Damper Stay Mt

Article number: 300054905 Product: TB-05 Alu. R Damper Stay Mt Give your TB-05 PRO chassis a firm rear with this aluminum damper stay mount, that promises to provide more secure damper stay attachment. Item Contents/Information • TB-05 Aluminum Rear Damper Stay Mount x1 • Provides more secure damper stay attachment and    ensures your fine setup adjustments are realized in    the rear damper performance. • Lightweight, durable aluminum component has the iconic    Tamiya blue anodized finish. • Use in place of kit standard T2 part. • Compatible with TB-05 PRO chassis cars.   Warning! Not suitable for children under 14 years.
€24.99
TVA incluse, plus Frais d'expédition

TB-05 Univ Prop Shaft (FM)

Article number: 300054901 Product: TB-05 Univ Prop Shaft (FM) Smooth power for your shaft-driven TB-05 PRO chassis car awaits with this set of parts to make a universal propeller shaft for the front motor layout version. Item Contents/Information • 90mm Aluminum Propeller Shaft (rear) x1 • 42mm Aluminum Propeller Shaft (front) x1 • Cross joints, input shafts and other small parts are included. • These parts replace kit standard propeller shafts and pilot shafts. • Newly-designed universal joint propeller shafts will give smooth,    efficient power.   Warning! Not suitable for children under 14 years.
€30.49
TVA incluse, plus Frais d'expédition

TB-05 Univ Prop Shaft (RM)

Article number: 300054902 Product: TB-05 Univ Prop Shaft (RM) Smooth power for your shaft-driven TB-05 PRO chassis car awaits with this set of parts to make a universal propeller shaft for the rear motor layout version. Item Contents/Information • 122mm Aluminum Propeller Shaft x1 • Cross joint, input shaft and other small parts are included. • These parts replace kit standard propeller shaft and pilot shaft. • Newly-designed universal joint propeller shaft will give smooth,    efficient power.   Warning! Not suitable for children under 14 years.
€17.99
TVA incluse, plus Frais d'expédition

TRF419 Alu R Upright 2deg

Article number: 300042341 Product: TRF419 Alu R Upright 2deg ★These precision uprights are crafted in aluminum and give 2 degrees of toe-in for a nimble, responsive drive. ★Durable aluminum ensures minimum effects from the stresses of cornering. ★Parts have a stylish blue anodized finish. ★Compatible with TRF418 design and reversible suspension setups.   Warning! Not suitable for children under 14 years.
€39.99
TVA incluse, plus Frais d'expédition

TRF419 Alu R Upright 3deg

Article number: 300042342 Product: TRF419 Alu R Upright 3deg ★These precision uprights are crafted in aluminum and give 3 degrees of toe-in for a nimble, responsive drive. ★Durable aluminum ensures minimum effects from the stresses of cornering. ★Parts have a stylish blue anodized finish. ★Compatible with TRF418 design and reversible suspension setups.   Warning! Not suitable for children under 14 years.
€39.99
TVA incluse, plus Frais d'expédition

TRF419 Suspension Upgrade Set

  Warning! Not suitable for children under 14 years.
€79.99
TVA incluse, plus Frais d'expédition

TRF420 3x25/22 SusShaft *2each

Article number: 300051637 Product: TRF420 3x25/22 SusShaft *2each These are spare suspension shafts that are used in the TRF420, Tamiya’s state-of-the-art 4WD touring car race chassis. They are for use with the new TRF420 design suspension arms. • 3x25mm Suspension Shafts x2 • 3x22mm Suspension Shafts x2 • Stainless steel material. • At 3mm in diameter, they are thicker than 2.6mm parts on previous chassis for a sturdier suspension setup. • Previous shafts had a cutaway flat section to fasten the grub screw on; these have a continuous groove to make it easier to fasten. • Compatible with cars using Item 51639 TRF420 D Parts (Suspension Arms).   Warning! Not suitable for children under 14 years.
€3.59
TVA incluse, plus Frais d'expédition

TRF420 3x43mm Sus Shafts *4

Article number: 300051636 Product: TRF420 3x43mm Sus Shafts *4 These are spare suspension shafts that are used in the TRF420, Tamiya’s state-of-the-art 4WD touring car race chassis. • 3x43mm Suspension Shafts x4 • Stainless steel material. • Compatible with TRF420, TB Evo.6*, FF-03 EVO* and TG10-Mk.2FN* chassis cars. • Note: *These chassis can only use the shafts on the front (2pcs.).   Warning! Not suitable for children under 14 years.
€3.59
TVA incluse, plus Frais d'expédition

TRF420 B Parts (Bumper)

Article number: 300051644 Product: TRF420 B Parts (Bumper) One too many crashes? Not a problem! Tamiya has this spare bumper designed as a replacement part for the TRF420 kit. • TRF420 B Parts x1 • The bumper design has been altered so as not to impact upon the chassis’ roll characteristics. • New body mounts are 2mm offset; change their attachment position for different body mount location to fine-tune your car's center of balance. • Compatible with TRF420 chassis cars.   Warning! Not suitable for children under 14 years.
€8.99
TVA incluse, plus Frais d'expédition

TRF420 C Parts Front Uprights

Article number: 300051638 Product: TRF420 C Parts Front Uprights These are the spare steering uprights for the TRF420 race car chassis. They feature the new 2-part front upright designs which utilize separate arm and bearing housing components. You can also use these new uprights on existing Tamiya touring car racing platforms. • TRF420 C Parts x1 • Components are molded in carbon fiber-reinforced plastic for superior rigidity. • Compatible with TRF420, TRF419, TA07 and TB-05 PRO chassis cars.   Warning! Not suitable for children under 14 years.
€5.79
TVA incluse, plus Frais d'expédition

TRF420 D Parts Sus Arms

Article number: 300051639 Product: TRF420 D Parts Sus Arms These are spare suspension arm parts for the TRF420 racing chassis kit. • TRF420 D Parts x2 • Components are molded in carbon fiber-reinforced plastic for superior rigidity. • The tweaked design uses aluminum inserts for damper attachment. Using different inserts (sold separately) allows adjustment of lever ratio, with three different setups possible. • Rear arms are 3mm offset to the rear, allowing the shorter TRF420 lower deck (while keeping the same wheelbase) and giving increased rear traction. • For use with 3mm diameter shafts (sold in Item 51637). • Compatible with TRF420, TRF419*, TA07* and TB-05 PRO* chassis cars. • Note: *Rear arms have different offset to kit standard parts, and require adjustment of wheelbase using spacers, etc.   Warning! Not suitable for children under 14 years.
€8.99
TVA incluse, plus Frais d'expédition

TRF420 Diff Pulley&Case (37T)

Article number: 300051643 Product: TRF420 Diff Pulley&Case (37T) This is a spare pulley plastic part for the TRF420 racing chassis machine. Use it to replace worn out pulleys in your drivetrain to keep your car running efficiently and smooth. • TRF420 37T Differential Pulley x1 • TRF420 Differential Case x1 • 0.2mm & 0.3mm Shims x2 each • The new design not only provides a weight savings of 1.5g, but also provides less oil leakage compared to previous designs. • Compatible with TRF420 and TA07 chassis cars.   Warning! Not suitable for children under 14 years.
€6.89
TVA incluse, plus Frais d'expédition

TRF420 E Parts Rear Uprights

Article number: 300051640 Product: TRF420 E Parts Rear Uprights These are spare rear upright parts for the TRF420 racing car chassis. • TRF420 E Parts x1 • Components are molded in carbon fiber-reinforced plastic for superior rigidity. • Bearing positions are precisely aligned for maximum efficiency. • For use with 3mm diameter shafts (sold in Item 51637). • Compatible with cars using Item 51639 TRF420 D Parts (Suspension Arms).   Warning! Not suitable for children under 14 years.
€6.89
TVA incluse, plus Frais d'expédition

TRF420 F Direct Pulley (37T)

Article number: 300051642 Product: TRF420 F Direct Pulley (37T) This is a spare front direct pully component to the TRF420. Use this item to replace damaged or worn parts in your drivetrain. • TRF420 Front Direct Pulley x1 • 0.2mm & 0.3mm Shims x2 each • Front direct pulley and direct holder are an integrated plastic part for a weight savings of 2g compared to separate parts used on previous generation of TRF chassis. • Direct cups are now screw-attached (was 2x9.8mm pins on previous chassis), allowing their replacement without the need to remove the direct pulley component. • Compatible with TRF420 and TA07 chassis cars.   Warning! Not suitable for children under 14 years.
€11.69
TVA incluse, plus Frais d'expédition

TRF420 F Parts 4deg HC

Article number: 300051641 Product: TRF420 F Parts 4deg HC These are spare hub carrier parts for the TRF420 racing car chassis. They are an improved and more durable design compared to the previous design found in the TRF417/418/419 era of cars. • TRF420 F Parts x1 • Components are molded in carbon fiber-reinforced plastic for superior rigidity. • The design was revised specifically for the TRF420 chassis, with greater resistance to shocks and crashes. • Upper and lower flanged tubes are now identical. • For use with 3mm diameter shafts (sold in Item 51637). • Compatible with cars using Item 51639 TRF420 D Parts (Suspension Arms).   Warning! Not suitable for children under 14 years.
€7.19
TVA incluse, plus Frais d'expédition

TRF420 K Parts (Bearing Hldrs)

Article number: 300051645 Product: TRF420 K Parts (Bearing Hldrs) • TRF420 K Parts x1 • Bearing holders (employed on gear diff and front direct pulley) redesigned for the TRF420 chassis, in order to provide even more precise location and a super-smooth drivetrain. • Compatible with TRF420 chassis cars.   Warning! Not suitable for children under 14 years.
€8.59
TVA incluse, plus Frais d'expédition

TRF420 Rear Belt (62T)

Article number: 300051646 Product: TRF420 Rear Belt (62T) • TRF420 Rear Belt (62T) x1 • This belt is made from reinforced, stretch-resistant material. • It is recommended to change belts periodically to maintain optimum performance. • Compatible with TRF420 chassis cars.   Warning! Not suitable for children under 14 years.
€7.19
TVA incluse, plus Frais d'expédition

TRF420 Wheel Axles *2

Article number: 300042346 Product: TRF420 Wheel Axles *2 These are the lightweight axles found on the TRF420 racing chassis touring car kit. They can be used as spare parts on the TRF420 or as Hop-Up Option parts on any of Tamiya’s TA or TB touring car machines. • TRF420 Wheel Axles x2 • Each axle weighs approximately 1.5g less than counterparts in Item 51445 TRF417 Wheel Axles (2pcs.), for less pressure and wear on tires. • Compatible with TRF420, TRF419, TA07 and TB-05 PRO chassis cars.   Warning! Not suitable for children under 14 years.
€11.49
TVA incluse, plus Frais d'expédition

0.4 Pinion Gear (40T, 41T)

0.4 Pinion Gear (40T, 41T)
€18.99
TVA incluse, plus Frais d'expédition

0.4 Pinion Gear (46T, 47T)

0.4 Pinion Gear (46T, 47T)
€19.99
TVA incluse, plus Frais d'expédition

0.6 Alu Pinion Gear 16T Hard coat.

Article number: 300054464 Product: 0.6 Alu Pinion Gear 16T Hard coat. These precision 06 module aluminum pinion gears feature hard coated surfaces to ensure superb durability. In addition, the teeth feature a special shape to reduce friction loss and noise from gear meshes.
€10.79
TVA incluse, plus Frais d'expédition

1/14 Tractor Truck Driver Fig.

Article number: 300056536 Product: 1/14 Tractor Truck Driver Figure Add a whole new level of realism to your 1/14 scale tractor truck with this assembly figure, which was originally included in the Grand Hauler (Item 56344). It is now available as a separately-sold Option Part. Figure Parts x1 Can be attached with double-sided tape, or cement. Note that some models may require modification of figure for attachment.
€12.79
TVA incluse, plus Frais d'expédition

10-Spoke Wheels Jaccs Accord white (2) 2

10-Spoke One-Piece Wheels *2
€11.49
TVA incluse, plus Frais d'expédition

10mm Shim Set *10 x 3 types

Article number: 300053588 Product: 10mm Shim Set *10 x 3 types These shim sets may be used to reduce suspension or wheel axle slop in any of Tamiya's on or off-road vehicles. Perfect for super fine tuning your race vehicle build. ?10mm Shim Set *10 x 3 types
€12.79
TVA incluse, plus Frais d'expédition

10T PINION GEAR 58110

Lieferumfang: 1 Stück Bohrung 3,17mm Länge 23mm Passend für Bush Devil / King Blackfoot   Warning! Not suitable for children under 14 years.
€5.79
TVA incluse, plus Frais d'expédition

19T Pinion Gear 57723

19T Pinion Gear for 57723   Warning! Not suitable for children under 14 years.
€5.29
TVA incluse, plus Frais d'expédition

1:10 Disc-Wheels Rally (2) gold 26mm

Wheels (2 pcs.) for 58333   Warning! Not suitable for children under 14 years.
€6.19
TVA incluse, plus Frais d'expédition

1:10 Dish-Wheels white 24mm (4)

Lieferumfang: 4 Stück Felgenmitnehmer 12mm 6-Kant Felgenbreite 24mm / MN (Medium-Narrow) Offset 0mm
€11.49
TVA incluse, plus Frais d'expédition

1:10 M-Chassis Inner Sponge Kit (4) gre

Lieferumfang: 4 Stück Passend für M-Chassis Ausführung Baukasten
€4.79
TVA incluse, plus Frais d'expédition

1:10 Med. Narrow Racing Slicks 24mm(2)

Medium-Narrow Racing Slicks
€11.49
TVA incluse, plus Frais d'expédition

1:10 Medium-Narrow Soft Inner Foam Blue

Article number: 300053434 Product: 1:10 Medium-Narrow Soft Inner Foam Blue These are rubber tire inserts designed to fit 24mm wheels. They come in pairs and the blue color easily identifies the insert as a soft firmness. Note: The firmer the insert the less traction your tire will yield. The softer the insert the more traction you will get out of your tires, but they will also wear out faster. Medium-Narrow Soft Inner *2
€8.29
TVA incluse, plus Frais d'expédition

1:10 MN Dish Wheel 24mm (4) Offset+2

Lieferumfang 4 Stück Felgenmitnehmer 12mm 6-Kant Felgenbreite 24mm / MN Medium-Narrow Offset +2mm
€12.79
TVA incluse, plus Frais d'expédition

1:10 Racing Radial Tires 24mm (2) MN

M-Narrow Racing Radial Tires
€13.49
TVA incluse, plus Frais d'expédition

1:10 Racing Wing (b) universal

Article number: 300054458 Product: 1:10 Racing Wing (b) universal For touring car races, it is essential to equip a rear wing that matches the body in terms of styling and down force effect. The racing wing version type B offers a flat horizontal wing element design and is made of polycarbonate material.
€9.89
TVA incluse, plus Frais d'expédition

1:10 Rally Dish Wheel white (4) 26mm/+2

Ford Focus RS WRC 03 Wheels*4
€12.49
TVA incluse, plus Frais d'expédition

1:10 Rallye-Cockpit-Set Left-Hand-Drive

Article number: 300054491 Product: 1/10 Rallye-Cockpit-Set Left-Hand-Drive This is an updated version of Item 50463 (RC Rally Car Cockpit Set). The cockpit set can be fitted to Tamiya 1/10 rally car body sets to add an extra level of realism. Thanks to the newly-included urethane sponge, it is compatible with a large range of chassis widths. It can be painted as users like using plastic model paints also available through Tamiya. Set contents: • Cockpit and helmet x1 • Urethane sponge bag x1 • Newly-designed stickers • Parts to attach cockpit to model.
€21.99
TVA incluse, plus Frais d'expédition

1:10 Spoke Wheel white 26mm (2)

Lieferumfang: 2 Stück Felgenmitnehmer 12mm 6-Kant Felgenbreite 26mm   Warning! Not suitable for children under 14 years.
€8.39
TVA incluse, plus Frais d'expédition

1:10 Sticker-Set TRF black/white

Article number: 300042164 Product: 1:10 Sticker-Set TRF black/white This sticker sheet comes with various TRF and Tamiya logos.
€5.99
TVA incluse, plus Frais d'expédition

1:10 Tires Rally Block-Type (2)

Article number: 300050476 Product: 1:10 Tires Rally Block-Type (2) The Tamiya Rally Block tire are packaged in a pair. These are the stock replacement tires that are found in many of Tamiya's Rally kit R/C cars. They feature a cross block design and are made of durable rubber material. These tires will fit standard Tamiya touring car wheels (26mm width). Rally Block Tires
€15.49
TVA incluse, plus Frais d'expédition

1:10 Tires Slick Kit-Type (2)

Article number: 300050454 Product: 1:10 Tires Slick Kit-Type (2) These vinyl tires are included stock in most Tamiya touring sedans that use 26mm wheels. These are the stock replacements that have many uses. Due to their low grip compared to higher performance Tamiya tires they are excellent for drifting purposes on asphalt and concrete surfaces. Racing Slick Tires *2
€13.49
TVA incluse, plus Frais d'expédition

1:10 TRF TC Springs short black (3)

Article number: 300042168 Product: 1/10 TRF TC Springs short black (3) This short spring set includes three pairs of black-colored springs (soft, medium and hard) to adjust handling with more precision. For easy identification, each spring features a blue (hard), yellow (medium), or red (soft) marking painted at the bottom of the spring.
€12.49
TVA incluse, plus Frais d'expédition

1:10 Twin 5-Sp. Wheels black(4) 26mm/+4

Article number: 300051263 Product: 1:10 Twin 5-Sp. Wheels black(4) 26mm/+4 Wheels included with TT-01 Ferrari FXX are now available as spare parts. Offset 4mm wheels are also expected to fill a demand for wide-tread compatible wheels, which are lacking on the market. these wheels are 26mm wide. *Compatible with TT-01 chassis. Twin 5-Spoke Wheel 26mm/+4 4pcs
€14.99
TVA incluse, plus Frais d'expédition

1:10 Wheel 18-Spoke grey 24 mm (4)

M-Narrow 18-Spoke Wheels 0
€11.49
TVA incluse, plus Frais d'expédition

1:10 Wheel Subaru Impreza gold 24,5mm(4)

M-Narrow 10-Spoke Wheels 0
€12.79
TVA incluse, plus Frais d'expédition

1:10 Wide Inner Sponge 30mm (2) Hard

Wide Inner Sponge(Hard)
€4.19
TVA incluse, plus Frais d'expédition

1:10 Y-Spoke Wheels grey 26mm (2)

Wheel (2 pcs.) for 58162 (+2)   Warning! Not suitable for children under 14 years.
€7.19
TVA incluse, plus Frais d'expédition

1:14 40ft. Maersk Container Kit f.56326

Article number: 300056516 Product: 1/14 40ft. Maersk Container Kit for 56326 The Maersk 40-Foot Container is now available as a stand lone item for those modelers who need the container by itself. The container was previously only available with the Semi-Trailer.
€229.99
TVA incluse, plus Frais d'expédition

1:14 Alum. Coupler Lever Plate 2/3 Axle

Article number: 300056535 Product: 1/14 Alum. Coupler Lever Plate 2/3 Axle Aluminum parts give a more authentic weighty feel when compared to kit-standard plastic parts. This coupler lever plate is a part used in the coupler unit of R/C tractor truck models, which enables the use of separately available support legs. The aluminum part gives Tamiya's RC semi-trucks a more realistic look. •Aluminum Coupler Lever Plate x1 •Screws and other small parts necessary for attachment are included. •Compatible with 1/14 scale R/C tractor trucks. •Note this part can also be attached when separately available support legs are not being used.
€27.49
TVA incluse, plus Frais d'expédition

1:14 Alum. Shift Servo Mount Truck

Article number: 300056531 Product: 1/14 Alu Servohalterung für Schaltservo This newly-designed aluminum shift servo mount has a stronger connection to the servo compared to the stock plastic part, allowing all of the servo's power to be transmitted to smoother gear changes. It also facilitates adjustment of the servo attachment position. For a cool look, it has an anodized gun metal color finish. Suitable for: 56305 Mercedes-Benz 1838LS 56307 Mercedes Benz 1850L 56312 Volvo Globetrotter 56318 Scania R470 56323 Scania R620 56325 MAN TGX 26.540 56327 Scania R620 Blue 56329 MAN TGX 18.540 56332 MAN TGX 18.540 Red 56335 Mercedes-Benz Actros 56338 Scania R470 Orange 56342 Mercedes-Benz Actros Black Set contents: Includes parts to attach servo mount. .
€32.99
TVA incluse, plus Frais d'expédition

1:14 Alum. Steering Servo Mount w/Saver

Article number: 300056532 Product: 1:14 Alu Servohalterung Lenkservo m.HTS. This aluminum steering servo mount improves the steering of Tamiya tractor truck models, and it's suited to be used with hi-torque servos. The included aluminum servo horn and hi-torque servo saver reduce vibration of the servo and provides swifter steering response.
€43.99
TVA incluse, plus Frais d'expédition

1:14 B-Parts reinforced Semi-Trailer

Article number: 300056525 Product: 1/14 B-Parts reinforced Semi-Trailer These option parts are strengthened versions of the B parts from Item 53602. The carbon reinforced molded polycarbonate parts offer increased strength. They are particularly useful for frequent towing. You can expect better axle shape retention and gear durability when using this reinforced part. Carbon Reinforced Matte Finish Axle x2 Compatible with Items 56302, 56306 & 56333. If using with Item 56310, only parts B1, B6, B13 & B14 are compatible. Not compatible with Tractor Trucks or Carson Trailers.
€21.99
TVA incluse, plus Frais d'expédition

1:14 Body-Set Scania R620 6x4 Highline

Article number: 300056514 Product: 1/14 Body-Set Scania R620 6x4 Highline Scania R620 Body Parts Set. Owners of Item 56325 MAN TGX 26.540 6x4 XLX will also be able to mount this Scania R620 body onto their truck chassis.
€164.99
TVA incluse, plus Frais d'expédition

1:14 Drivercabine King Hauler

Body for 56301   Warning! Not suitable for children under 14 years.
€50.99
TVA incluse, plus Frais d'expédition

1:14 Met.Plat. Fr. Wheels (2) Flat fin.

Article number: 300056517 Product: 1/14 Metal Plated Front Wheels (2) Flat fin. Actual trucks used in logistics networks are often seen with plain natural metal wheels made of steel or aluminum. To depict this type of wheel, these matte finish metal-plated wheels for 1/14 scale R/C tractor trucks are available as an option wheel set. By simply replacing with kit-standard gloss finish metal-plated wheels, you can give your truck a different appearance. These wheels are designed for use with tires with 22mm width.   Warning! Not suitable for children under 14 years.
€7.49
TVA incluse, plus Frais d'expédition

1:14 Met.Plat. Re. Wheels (2) Flat fin.

Article number: 300056518 Product: 1/14 Metal Plated Rear Wheels (2) Flat fin. Actual trucks used in logistics networks are often seen with plain natural metal wheels made of steel or aluminum. To depict this type of wheel, these matte finish metal-plated wheels for 1/14 scale R/C tractor trucks are available as an option wheel set. By simply replacing with kit-standard gloss finish metal-plated wheels, you can give your truck a different appearance. These wheels are designed for use with tires with 22mm width.   Warning! Not suitable for children under 14 years.
€12.79
TVA incluse, plus Frais d'expédition

1:14 Motorized Support Legs

Article number: 300056505 Product: 1/14 Motorized Support Legs Everything you need (minus servo) to allow you to drop the legs and unhook your trailer by a 4 channel radio. Retractable leg motors run on 4 AA batteries(not included) you mount under trailer. Simple installation that can be added to any of our trucks at anytime. Motorized Sup. Legs
€104.99
TVA incluse, plus Frais d'expédition

1:14 RC Light Unit Trailer

Article number: 300056502 Product: 1/14 RC Light Unit Trailer The Semi-Trailer Light Set when combined with the Tractor Truck Electrical Unit Set or Multi-Function unit, allows the modeler to further enhance appearance and performance with functional blinkers and brake lights. The unit can be easily installed on the semi-trailer without any complicated wire connecting chores. Power is supplied by the truck's running battery. The set includes semi-trailer connector cable with light bulbs and internal circuitry board connector cable. Includes easy to understand instructions. Not Compatible with Carson Trailers! Semi-Trailer Light
€51.99
TVA incluse, plus Frais d'expédition

1:14 Reinf. Joint Cup + Bevel Gear 6x4

Article number: 300056530 Product: 1/14 Reinf. Joint Cup + Bevel Gear 6x4 This joint cup set features newly-designed parts to replace the kit-standard parts. They are made from a heat-treated alloy which features greater resistance to wear and tear. They are attached by pin and axle ring, which leads to smoother rotation and less tendency for the joint to come apart. Set Contents • Reinforced Bevel Pinion Gear x3 • Reinforced Joint Cup x4 • F-350 Ring Gear x2 • Differential Shaft x2 • Compatible with 6x4 R/C tractor truck models.
€47.99
TVA incluse, plus Frais d'expédition

1:14 Roof-Spoiler for US Tractor Trucks

Article number: 300056504 Product: 1/14 Roof-Spoiler for US Tractor Trucks This is an adjustable wind-deflector type roof spoiler designed for Tamiya's 1/14 scale radio controlled Tractor Trucks. The realistic Roof Spoiler not only enhances appearance but is also functional as seen on full-sized trucks. The Roof Spoiler can be mounted easily using double-sided tape or screws included in set. Vital components such as spoiler-rails and spoiler-rod use metal parts to attain necessary strength while the deflector panel and cross-member is injection molded for scale appearance. Spoiler angle can be easily adjusted between 30 - 90 degrees allowing you to select the desired angle. Tamlya offers other tractor truck optional such as Semi-Trailer, Tank-Trailer, and Electrical Unit Set to support your trucking desires. Roof Spoile
€42.99
TVA incluse, plus Frais d'expédition

1:14 Telescopic Antenna f. Tractor Truck

Article number: 300056507 Product: 1/14 Telescopic Antenna f. Tractor Truck You can use this a replacement for the stock wire and tube type R/C antenna. It will give your truck a custom look and no reception loss. Telescopic Antenna
€14.99
TVA incluse, plus Frais d'expédition

1:14 Tractor Truck Animal Guard

Article number: 300056506 Product: 1/14 Tractor Truck Animal Guard Tractor trucks rolling along highways worldwide are often seen incorporating tough protective equipment known as animal guards. Tamiya's highly realistic rendition of the animal guard greatly enhances the appearance of Tamiya's 1/14 scale R/C tractor trucks. The guard incorporates hard anodized aluminum bars and metal plated ABS supports. Set includes the necessary parts and screws for mounting on all Tamiya 1/14 scale tractor trucks. Truck & Trailer not included. Animal Guard
€39.99
TVA incluse, plus Frais d'expédition

1:14 Tractor Truck Diff Housing reinfor.

Article number: 300056524 Product: 1/14 Tractor Truck Diff Housing reinfor. These option parts are strengthened versions of the A parts from Item 56301 King Hauler. The molded polycarbonate is reinforced with carbon fibers to increase toughness, while the matte finish improves the models realistic look. Carbon reinforced matte finish diff housing x1 Compatible with any Tamiya 1/14 scale tractor truck models.
€12.49
TVA incluse, plus Frais d'expédition

1:14 Tractor Truck Oil Shock blue (2)

Article number: 300056503 Product: 1/14 Tractor Truck Oil Shock blue (2) This is 1 set (2 pcs.) of an oil damper kit for the Tractor Trucks & Trailers. Tractor Truck Oil Shocks *2   Warning! Not suitable for children under 14 years.
€31.99
TVA incluse, plus Frais d'expédition

1:14 Tractor Truck Tire (2) hard / 22mm

Article number: 300056527 Product: 1/14 Tractor Truck Tire (2) hard / 22mm These tractor truck tires are made of a hard compound material which is well-suited to use on Tamiya 1/14 scale tractor trucks. Using these tires on the front of the trailer combats over-steer and rear sliding to provide a more stable driving experience. Fitting them to the trailer means smoother cornering to lower traction. • Compatible with all tractor trailer trucks other than Item 56335 Mercedes-Benz Actros 1851 GigaSpace. • Can be used with double-tire trailers.   Warning! Not suitable for children under 14 years.
€10.79
TVA incluse, plus Frais d'expédition

1:14 Tractor Truck Tire (2) hard / 30mm

Article number: 300056528 Product: 1/14 Tractor Truck Tire (2) hard / 30mm These tractor truck tires are made of a hard compound material which is well-suited to use on Tamiya 1/14 scale tractor trucks. Using these tires on the front of the trailer combats over-steer and rear sliding to provide a more stable driving experience. Fitting them to the trailer means smoother cornering to lower traction. • Compatible with Item 56335 Mercedes-Benz Actros 1851 GigaSpace trailer head. • Can be used with single-tire trailers.   Warning! Not suitable for children under 14 years.
€14.99
TVA incluse, plus Frais d'expédition

1:14 Trailer Wheels 30mm BB (2)Flat Chro

Article number: 300056520 Product: 1/14 Trailer Wheels 30mm BB (2) Flat Chrome Actual tractor trucks are often seen with plain natural-metal wheels made of steel or aluminum. To depict this type of wheel, these matte finish metal-plated wheels for 1/14 scale R/C tractor trucks and semi-trailers are available as an option accessory. By simply replacing with kit-standard gloss finish metal-plated wheels, you can give your truck or trailer a different appearance. Important Information: Compatible with 3-axle Tamiya Tractor Trailer (Rearmost axle). Compatible with Mercedes-Benz Actros #56335 front wheels.   Warning! Not suitable for children under 14 years.
€9.79
TVA incluse, plus Frais d'expédition

1:14 Trailer Wheels 30mm Hex(2)Flat Chro

Article number: 300056519 Product: 1/14 Trailer Wheels 30mm Hex(2) Flat Chrom Actual tractor trucks are often seen with plain natural-metal wheels made of steel or aluminum. To depict this type of wheel, these matte finish metal-plated wheels for 1/14 scale R/C tractor trucks and semi-trailers are available as an option accessory. By simply replacing with kit-standard gloss finish metal-plated wheels, you can give your truck or trailer a different appearance. Compatible only with 3-axle trailers equipped with single axle 30mm wheels.   Warning! Not suitable for children under 14 years.
€9.79
TVA incluse, plus Frais d'expédition

1:14 Truck Alu. Oil Damper black (2)

Article number: 300056515 Product: 1/14 Truck Alu. Oil Damper black (2) Customize your 1/14 scale tractor truck or trailer with these Aluminum Oil Dampers. These dampers effectively absorb shocks from the road surface and allow you to enjoy smooth driving. The black-colored aluminum damper cylinders have plastic bottom end caps to offer easy damper maintenance such as replacing o-rings.   Warning! Not suitable for children under 14 years.
€32.99
TVA incluse, plus Frais d'expédition

1:14 V-Parts Truck Twin-Wheels (1)

V Parts (1 pc.) for 56301   Warning! Not suitable for children under 14 years.
€14.19
TVA incluse, plus Frais d'expédition

1:14 Warning-Sticker Set Tractor/Trailer

Article number: 300056534 Product: Warning-Sticker Set Tractor/Trailer This sticker set allows you to customize the look of you semi-tractor and semi-trailer truck. • Stickers depict markings, which are seen on European trucks. • Contains a range of stickers to depict national identification marks, warning markings, speed limitations, individual letters/numbers, and much more! • A large number of different designs mean that you will be able to create an individual scheme. • Usable with any 1/14 scale tractor truck body.
€18.99
TVA incluse, plus Frais d'expédition
Informations relatives à l'expédition

Si vous avez mis cet article dans le panier, l'adresse de livraison de votre commande est limitée aux pays suivants :

vers le haut